Professional Documents
Culture Documents
Owner'S Manual: L26F6/L32F6/L42F6
Owner'S Manual: L26F6/L32F6/L42F6
Owner'S Manual: L26F6/L32F6/L42F6
L26F6/L32F6/L42F6
TFT-LCD TELEVISION
Please READ this manual carefully before
operating your TV, and retain it for future
reference.
See more at http://safe-manuals.com
Contents
Contents
Warning 3 How to select the picture mode.................................... 15
How to customize your own picture status............... 15
Sound Control Functions...................................16
Important Safety Instructions 4
How to choose Digital tone mode................................ 16
How to customize your own sound status................ 17
Panel Control and Rear Terminals Timer Functions..................................................18
Control 6 Setting of Current Time..................................................... 18
Panel Control........................................................ 6 Setting of ON/OFF Time.................................................... 18
Rear Terminals Control......................................... 6 Setting of On Channel....................................................... 18
Setting of Remind Time and Remind Channel......... 18
Remote Control 7 Function Menu....................................................19
Function Menu Set............................................................. 19
Battery loading..................................................... 7
Adjust Menu........................................................20
Precautions........................................................... 7
Lock Setup...........................................................20
Remote Control Function 8 How to use the password function............................... 21
USB Mode............................................................22
Function introduction.......................................... 8
Warning
WARNING:
! WARNING
RISK ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS
INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
* To avoid electric hazards, it is strongly suggested that the back cover not be opened, as there is no any
accessory inside the casing.
* lf necessary, please contact authorized after-sales services.
* A lighting flash mark in a triangle: A potentially hazardous situation, which, if not avoided, could result in
serious injury by high voltage.
* An exclamation mark in a triangle: Major part or accessory of which technical specifications must be followed if
it is to be replaced.
WARNING: To avoid fire or electric hazards, never place your television receiver in an area with heavy
moisture. Attention should be paid to avoid accidental scratches or impacts onto the screen.
CAUTION: ▲ Please read this manual carefully before using your television and keep this manual in a
good place for future reference.
▲ To achieve the best performance of your television, read this User’s Manual carefully and
properly store it for future reference.
▲ Information of screen displays and figures in the User’s Manual may vary due to technical
innovations.
Panel Control
ANT
VIDEO
ANT
GOMPONENY
Y Pb Pr L R PC AUDIO PC
AV OUT
AV 2IN
1 2 3
IN
VGA IN
4 5
Remote Control
Battery loading
1. Slide open the cover of the battery compartment on
the back of the remote controller.
2. Load two 7# (AAA) alkaline batteries in the
compartment, (plus and minus poles to respective mark)
3. Replace the cover of the battery compartment.
Precautions
As strong light may interfere the signals, change your Make sure that two AAA alkaline batteries are loaded.
position to operate the remote controller if the television The batteries must be of the same type. The batteries
cannot be turned on or off as you expect. must be located properly. The batteries are not
rechargeable.
Function introduction
Press this key to start TV from standby mode, press it again to return to standby
1 POWER
mode.
2 SCAN It is only available in TV mode.
SCAN HDMI 3 Picture Mode Press this key continuously to select the picture mode.
Press once to display a frozen image of the current program, but audio
4 FREEZE
FREEZE P.MODE S.MODE ARC
continues. Press again to return to the program.
H.LOCK SLEEP Ⅰ/Ⅱ FAVORITE
5 HDMI Press to select a device connrcted to the HDMI input.
6 Sound Mode Press this key continuously to select the sound mode.
7 ARC Press this key to select the screen display proportion.
8 SLEEP Displaying the sleep time.
12 9 H. LOCK Refer to the Functional Description on Page 20
0 I/II No available
A FAVORITE Press to open the favorite channel list in TV.
SOURCE DISPLAY B 0-9 These keys are used to select a channel.
14
C SOURCE Press this key to open/close signal source options menu.
MUTE RECALL
16 D DISPLAY Press to display the TV status information on the top of the TV screen.
Press this key to mute the sound, press it again to activate the sound. The sound
E MUTE
may be activated by turning the TV on again or increasing the volume .
VOL CH 18 Press this key to display the Special Function Menu (it functions when special
F RECALL
modules are inserted).
MENU EXIT G VOL+ /- Used to adjust the volume when the screen menu is closed.
19 20 Used to select a TV channel when the screen options menu is closed, specifically,
H CH∧/∨
press CH∨ to decrease the channel and press CH∧ to increase the channel.
21
I MENU Press this key to display or exit the main menu.
OK 22
J EXIT Clears all on-screen displays and returns to TV viewing from any menu.
THUMBSTICK (Up/ Allows you to navigate the on-screen menus and adjust the system setting to
K
USB BACK
Down/Left/Right) your preference.
23 24
L OK Press this key to confirm the selection.
REC TIMESHIFT PLAY/PAUSE HELP
M USB Press this key for quick switching of streaming media.
25 INDEX 27 N BACK Back button(only for USB).
26 28
REV FWD PREV NEXT O REC No available.
29 31
30 TEXT MIX SUBCODE HOLD 32 P TIMESHIFT No available.
33 35 Q HELP Press this key to select music mode when using a USB device to play music.
34 PIP SWAP MOVE ZOOM 36 R PLAY/PAUSE Play/Pause(only for USB).
37 39
38 40
S REV Fast Reverse(only for USB).
T FWD Fast Forward(only for USB).
U NEXT Next(only for USB).
V PREV Previous(only for USB).
W TEXT No available.
X MIX No available.
Y HOLD No available.
Z SUBCODE No available.
[ PIP PIP/Teletext Reveal.
\ SWAP PIP SWAP.
] ZOOM Picture zoom function(only for USB).
` MOVE PIP MOVE.
Note:
* It is recommended that you'd better use 75Ω coaxial cable to remove
the disturbance caused by airwave.
* Don't bind antenna cable and electric wire together.
Choose Your Connection select the source, press the button to confirm.
There are several ways to connect your television,
depending on the components you want to connect and DVD Setup
the quality of the signal you want to achieve.
The following are examples of someways to connect
your TV. Choose the connection which is best for you. How to connect
VCR Connection A Connect the DVD video outputs (Y, Pb/Cb, Pr/Cr)
to the COMPONENT (Y, Pb/Cb, Pr/Cr) input jacks on
To avoid picture noise (interference), leave an adequate the TV and connect the DVD audio outputs to the
distance between the VCR and TV. AUDIO jacks on the TV’ as shown in the figure.
IN
VGA IN
Y Pb/Cb Pr/Cr L-AUDIO-R VGA/DVI AUDIO VGA
ANT
2
VGA IN
How to use
A Turn on the DVD player, insert a DVD.
B Use the SOURCE button on the remote control,and
then press 56
/ button to to select COMPONENT
Connection Option 1
mode, press the
button to confirm.
B Insert a video tape into the VCR and press PLAY on How to connect
the VCR. (Refer to the VCR owner’s manual.)
•• Use the TV’s COMPONENT (Y, Pb/Cb, Pr/Cr) INPUT
C Select the input source with using the SOURCE button jacks, VGA or HDMI port for video connections,
on the remote control, and then press 5/6button to depending on your set-top box connections
IN
VGA IN
Y Pb/Cb Pr/Cr L-AUDIO-R VGA/DVI AUDIO VGA
How to use 2
Note
VGA IN
VIDEO L-AUDIO-R VIDEO L-AUDIO-R along period of Time. The fixed image may become
permanently imprinted on the screen.
RR The synchronization input form for Horizontal and
Vertical frequencies is separate.
RR To obtain the best picture, do not play the USB,
YPbPr, HDMI or PC source at the same time.
/
PC Setup
Monitor Out Setup
How to connect
The TV has a special signal output capability which
A Use the TV’s PC IN port for video connections. allows you to hook up a second TV or monitor.
B Then, make the corresponding audio connection. If Connect the second TV or monitor to the TV’s AV OUT.
using a sound card, adjust the PC sound as required. See the Operating Manual of the second TV or monitor
for further details regarding that device’s input settings.
How to use
2
A Turn on the PC and the TV.
B Turn on the display by pressing the POWER button
on the TV’s remote control.
C Use SOURCE on the remote control to select PC source.
D Check the image on your TV. There may be noise
associated with the resolution, vertical pattern,
contrast or brightness in PC mode. If noise is
present, change the PC mode to another resolution,
change the refresh rate to another rate or adjust the
brightness and contrast on the menu until the picture
Note
is clear. If the refresh rate of the PC graphic card
can not be changed, change the PC graphic card or RR Component, PC, HDMI input sources cannot be
consult the manufacturer of the PC graphic card. used for Monitor out.
RR When connecting with external audio equipments, In the manual, the OSD (on screen display) may be
such as amplifiers or speakers, please turn the TV different from your TV’s because it is just an example to
speakers off. help you with the TV operation.
Switching ON/OFF the TV set on the TV screen (as shown in the below figure). Press
56 /
to select the TV option, and press or OK
Source
❖❖ Search
TV
AV1 Press 56 / to select the Search option, and
finally press 3/4to start manual search. Upon
AV2
S-Video finding a program, the search will automatically
Component stop, and the program will be stored onto the
PC current channel. You may stop the search by
HDMI1 pressing OK or MENU.
HDMI2
USB ❖❖ Fine Tune
:Move OK :OK
Press 56/ to select the Fine Tune option, and
then press 3/4 to start UP or DOWN fine tuning
until obtaining a relatively good picture effect. The
fine tuning function is for the purpose of improving
picture effect through fine tuning when that of a
Searching Channel certain program is not good enough. Normally,
the optimal picture effect can be obtained without
In this section, how to use the remote control to set fine tuning when watching TV programs, and fine
channel is explained. You can also use buttons on the TV tuning is to meet the need of adjusting a certain
set to set channel. program.
❖❖ Color system
Channel Edit
Press 56 / to select the Color Systems option,
and then press 3/4 to select correct color
Note: Only available in the source of TV and Tuning lock
in the H.Lock menu is off. system.
The TV is designed with four systems for your
A Press MENU on the remote control unit or MENU choice, i.e. Auto, PAL , SECAM, NTSC and NTSC443.
on the TV’s front panel to display main menu,
Generally, the system is set as Auto and it is not
and then press 3/4 to select Tuning menu. necessary to make an adjustment. The system is
normally set as Auto during auto search.
❖❖ Sound system
The TV is designed with four systems for your
choice, i.e. D/K, M, B/G and I. Generally, it is not
necessary to adjust the system. The system is
normally set as DK during auto search.
❖❖ Skip
When the skip is set ON, the channel will be
skipped when pressing CH ∧ or CH ∨ and only can
B Press 5/6 to select the Channel Edit be selected by pressing 0-9 numerical keys.
Channel Edit
Auto Search
Watching TV Program
Prog. Exchange
Tuning Auto Search
You can watch TV program in a presetting channel.
Do you want to start
auto search?
the TV set to adjust the volume level. The range is Due to different TV signal inputs, some items may need
0~100. When the volume buttons are pressed the to be adjusted. The following makes a description by
volume level is displayed automatically on the TV only taking TV signal as an example.
screen.
How to select the picture mode
Mute Setting
A Press MENU to display main menu on the screen, and
A Press MUTE button on the remote control and a icon then press / 56to select the Picture menu, afterwards
press OK/4 to enter the option to be adjusted.
will display on the screen. At this time, the sound of
the TV set is turned off. B Press 5/6 to move the Picture mode option
B If you want to recover the sound, press MUTE
to be adjusted, and then press
Standard/Soft/User/Vivid.
5/6 to select
button again or directly press VOL+ button.
You can also press P.MODE on the remote control to
select Standard/Vivid/Soft/ User mode.
Quick program view
A Suppose that you previously watched a TV program
on Channel 8, but now you are watching a TV
program on Channel 18 (as shown in the below
figure).
❖❖ Standard
The picture brightness and hue are moderate.
❖❖ Soft
The picture is soft and in light color.
❖❖ User
The picture effect is set by yourself to your preference.
❖❖ Vivid
B If you want to return to Channel 8, just press The picture is vivid, bright and dynamic.
"RECALL (Flashback)" once.
❖❖ Reset
❖❖ Contrast Return to factory default settings. Press 3/4to
This will adjust the intensity of bright parts in the select OK or Cancel, Press OK to affirmance.
picture but keep the dark parts unchanged.
❖❖ Brightness Palette Standard
This will adjust the light output of the complete Reset
Reset
picture, which will mainly affect the darker areas of Do you want to reset
the picture. Picture picture values?
OK Cancel
❖❖ Color
This will adjust the saturation level of the colors to suit
your personal preference.
Menu Return Move OK OK
❖❖ Sharpness
This will adjust the sharpness of fine details in the picture.
❖❖ Tint
Sound Control Functions
Allows you to select the color mix (Tine) of the picture.
❖❖ Picture Mode How to choose Digital tone mode
Select the mode of picture(Standard/Vivid/Soft/User).
A Press MENU to display main menu on the screen,
❖❖ Aspect Ratio
Select the mode of Aspect Ratio(Full screen/4:3/
and then press 56/ to select the Sound menu,
Zoom/Cinema/Panorama/Dot By Dot). afterwards press OK/4 to enter the option to be
adjusted.
❖❖ Palette:
56
Press / to select the Palette option, and then B Press 5/6 to move the cursor to the Digital tone,
press 4 to enter its submenu, and finally press Press OK/4to enter and then press 5/6 to
56 / to select a toner pattern from six patterns
(Cool2/Cool1/Standard/Warm1/Warm2/User) to your
select Standard/Music/Theater/User mode.
received.
Select the mode of sound (Standard/Music/Theater/User). Menu Return Move OK OK
If the Music mode is selected, press OK to enter the
digital tone menu,(as shown in the below figure),
and then press 3/4 to select a benchmark in the
range of 50~15K from bass to treble, afterwards press
56 / to adjust, if a different benchmark is selected
for adjustment, the original adjustment data will be
automatically cleared.
Timer Functions
Function Menu
Return
❖❖ DSM
Press 3/4 to set Demo Off/Demo I/Demo II.
Adjust Menu
❖❖ Background The TV can be used as a display, and you may adjust
relevant settings. Press SOURCE to switch the signal
Press 3/4 to set ON or OFF, if you select ON, the input to PC mode.
TV screen will be blue background if no signals are
available. A Press MENU to display the screen main menu, press
❖❖ Black Stretch 56 / to select the Adjust menu as shown in the
Press 3/4 to set ON or OFF, if you select ON, the TV below figure, and then press OK/4to enter.
picture in black area will be enhanced.
❖❖ OPC
56
•• Press / to select the OPC Menu option.
•• Press 4 to enter the submenu.
•• Press56/ to select OPC Mode/Adjust, and then
press 3/4 to adjust it.
OPC
Menu Return Move OK OK
OPC Mode User
Adjust 10
B Press 5/6 to select the option to be adjusted.
C Press 3/4 to adjust it.
❖❖ Auto Adjust
Return Vertical and Horizontal position of picture can be
adjusted in this item.
❖❖ Effect ❖❖ Horizontal Position
56
•• Press / to select the Effect option.
•• Press 4 to enter the submenu.
This is used to adjusting Horizontal-size.
56
•• Press / to select the Calendar option.
•• Press OK/4 to enter the submenu.
❖❖ Phase
This is used for adjusting Vertical position and
•• Press 3/4 to select year/month/day, and Horizontal position as well as relative parameters in
then press 56 / to adjust it. After finishing
time setting, press OK or MENU to confirm.
PC modes.
❖❖ Clock
Calendar This is used for adjusting the phase of pixel clock in
PC mode.
Sun. Mon. Tues. Wed. Thur. Fri. Sat.
❖❖ Reset
Return to factory default settings.
Lock Setup
. The television has the function of security default lock.
❖❖ Reset Password needs to be entered when the program lock
Return to factory default settings. Press 3/4to mode is to be set.
select OK or Cancel, Press OK to affirmance.
❖❖ I2C Bus C After entering the system menu, press 3/4on the
remote control unit to select the require USB files,
It is no need for user to select the after-sale service
option. press OK button to confirm the selection and enter
the file list relative to the selection.
USB Mode D Press 5/6on the remote control unit to select the
required file, press OK button to enter the selected file.
Note
E To exit the streaming media playing system and
watch a TV program, you must press EXIT button to
RR The diagrams in the following section are return to the streaming media main menu at first
schematic and only for your reference. Please see (to protect equipment), and then press SOURCE to
the actual product if necessary.
select TV to return to the TV mode.
RR You can choose the photos or music in different A After entering USB main interface, press 3/4 to
files to play together. select MUSIC item.
B Press OK to confirm the selection and enter the
Playing a Picture music file list.
Playing Music
Maintenance
Maintenance
Early malfunctions can be prevented. Careful and regular
cleaning can extend the amount of time you will have
your new TV. Be sure to turn the power off and unplug
the power cord before you begin any cleaning.
C Press 3/4 and OK button to select the text you
want to play, and then press OK button to play the Cleaning the Screen
text.
A Here’s a great way to keep the dust off your screen
D To exit the Text mode, just press EXIT repeatedly. for a while. Wet a soft cloth in a mixture of lukewarm
water and a little fabric softener or dish washing
detergent. Wring the cloth until it’s almost dry, and
then use it to wipe the screen.
B Make sure the excess water is off the screen, and
then let it air-dry before you turn on your TV.
Set up
A After entering USB main interface, press 3/4 to Cleaning the Cabinet
select Set up item.
To remove dirt or dust, wipe the cabinet with a soft, dry,
B Press OK to confirm the selection and enter the set lint-free cloth. Please be sure not to use a wet cloth.
up file list.
Extended Absence
If you expect to leave your TV dormant for a long time
(such as a vacation), it’s a good idea to unplug the power
cord to protect against possible damage from lightning
or power surges.
Troubleshooting
For the sake of time and cost, it is strongly
C Press5/6 to select the Slide show spead Menu option, recommended that you checkout the problem by
and then press 3/4 to set Fast/Slow/Normal. yourself according to the instructions listed hereunder
Press5/6 to select the Slide Effect Menu option, and before contacting the after-sales service for technical
then press 3/4 to set Diagonal/Waterfall/Randow/ assistance.
No Effect/Bottom To Top/Top To Bottom/Right To
Left/Left To Right/Snake/Cross. Press5/6 to select
Problem Possible remedies
the Music Repeat Mode Menu option, and then press
3/4 to set On/Off/Random.
D To exit the Sut up mode, just press EXIT repeatedly.
Specification
Problem Possible remedies
Good
Depress the volume button;
picture,
no sound
Check out theaudio frequency input signals. Basic specification and parameter
Check to see if the remote controller Power ~ 150-240V 50/60Hz
Failure of
display receiving window are blocked
remote
by other objects and if batteries are Color System PAL, NTSC, SECAM, NTSC4.43
controller
properly loaded.
Stand-by
Designate the item of color from the D/K, B/G, I, M
Consumption
Picture menu and depress the volume
No color, button; Keep the display and VCR USB, AV, Component, HDMI,
weak color separate a reasonable space; Activate Video Input
S-Video , PC,
or poor some functions to store picture
picture brightness; Make sure that the display Operating temperature range:
and signal source are available and +5°C - +35°C Operating
turned on.
humidity range: 20%-80%
Excessive Storage Temperature:
brightness Adjust brightness or contrast. -15°C~+45°C
or darkness Storage Humidity: 5%-90%,
non-condensing
Picture Environmental
too big or Adjust the setup of sizes. condition If the storage temperature is
small lower than 0 °C, please first
One lays the machine aside after
speaker Balance the sound in the menu. in the operating temperature
failure environment carries on restores
Slight 2 hours, then electrifies the use
sound again, protects your television
It is a normal phenomenon.
from not to receive the damage.
display
Owner’s manual x1
Remote Control x1
Note
Accessories Alkaline battery x2
(This is only available for certain
RR Do not leave the television with static picture in an models,please refer to actual products.)
extended period as it may result in residual image
on your television screen.
Product main size (contain stand)
Note
RR Production of the screen requires high and precision Power
MODEL Net Size(LxWxH) Net Weight
technologies. However, there might be some Consumption
dank or bright (red, blue or green) spots, or some L26F6 90W 658x200x488mm 7.8Kg
anomalistic stripes or spots. This is not defect. If the
TV set is used in an area 2,400 meters above the sea L32F6 115W 798x230x575mm 10Kg
level where the air pressure is below 750hpa, the L42F6 170W 1020x300x697mm 17.5Kg
picture on the screen maybe affected and a muffled
Note 1 480i/480p 60
RR Design and specifications are subject to change 2 576i/576p 50
without notice. The dimension in this manual is a
approximation. 3 720p 50/60
4 1080i 50/60
Format
Recommendatory HDTV/
SDTV(YPbPr/YCbCr) format
Sequence Refresh
Format
Number Frequency (Hz)
1 480i/480p 60
2 576i/576p 50
3 720p 50/60
4 1080i/1080p 50/60
Recommendation PC connection
input format
sequence H-Frequency V-Frequency
Format
number (KHz) (Hz)
1 640*480@60Hz 31.5 60
2 800*600@60Hz 37.88 60
1024*768@60Hz
3 48.36 60
(Recommendatory)
1 640*480 60
2 800*600 60
3 1024*768 60
Recommendation HDMI
connection input format
Sequence
Format Refresh Frequency (Hz)
Number