Professional Documents
Culture Documents
Duo-Fine P Series Filter Cartridges: High Surface Area Pleated Cartridges With Polyester Hardware
Duo-Fine P Series Filter Cartridges: High Surface Area Pleated Cartridges With Polyester Hardware
Duo-Fine® P Series
Filter Cartridges
Performance Specifications
Filter grades
0.2, 0.45, 1, 3, 10, 30, 50 µm
Product Specifications
Materials of construction Dimensions (nominal)
Filter media: Outside Diameter: 6.4 cm (2.5 in)
50 µm: Spunbonded polyester Lengths (tip-to-tip): 25.4 cm (10 in), 50.8 cm (20 in),
All other grades: Borosilicate microfiberglass with 76.2 cm (30 in), 78.5 cm (30.9 in),
acrylic binder 101.6 cm (40 in)
Support material: Polyester
Hardware: Polyester
Sealing: Thermal bond 1 Provided that the maximum differential pressure is not exceeded based
on temperature limits defined above.
Gaskets/O-rings: Fluorocarbon elastomer, nitrile, 2 With compatible fluids.
hydrocarbon rubber, silicone
elastomer, FEP encapsulated
silicone
Particle Retention (µm)
Duo-Fine P Series filter cartridges have been Typical Flow vs. Differential Pressure for Application
extensively laboratory and field tested to determine Sizing
removal efficiencies in the most stringent of operating Flow rate (lpm), water at 20°C
conditions. 3.0 0.20
µm
The removal rating of any filtration device will depend
2
0.
2.5
on, to some extent, the conditions under which it is
0.15
used or tested. The test results will be influenced by
Table 1 Table 3
Code Filter Code Gasket/O-ring
grades (µm) materials
0.2 0.2 S Silicone
0.45 0.45 N Nitrile
1 1 E Hydrocarbon
3 3 rubber
10 10 V Fluorocarbon
elastomer
30 30
T FEP encapsulated
50 50 silicone (O-rings)
Table 2 Table 4
Code Cartridge Code End
lengths (cm / in) configurations
nominal
DOE DOE with
10 25.4 / 10 elastomer gasket
20 50.8 / 20 seals & end caps
30 76.2 / 30 M3 SOE flat closed
end, external
30.9 78.5 / 30.9 222 O-rings
40 101.6 /40 (retrofits other
manufacturers’
3 For details, contact Pall
Code 0)3
Corporation. M8 SOE fin end,
external 222
O-rings (retrofits
other
manufacturers’
Code 5)3
© Copyright 2005, 2016, Pall Corporation. Pall, , and Duo-Fine are trademarks of Pall Corporation.
® Indicates a Pall trademark registered in the USA. Filtration. Separation. Solution.SM is a service mark of Pall Corporation.