Professional Documents
Culture Documents
Operating Manual Electronic Floor Scale M35611 - Dencor
Operating Manual Electronic Floor Scale M35611 - Dencor
ADE scales are instruments of high precision. In order to get the most accurate results please read
and respect the instructions of the Operating Manual.
Insert battery:
Unit function:
Underneath the scale you can manually choose the weighing unit by shifting the sliding button to
either kg, lb or st. The weight will now be indicated in the selected unit.
Weighing:
1. Place and use the scale on a safe and even ground (no carpet).
2. To start the scale tap on the platform.
3. Wait for abt. 3 seconds until the display comes to zero. A short function test ‘8’ can be seen on
the display before it comes to ‘0.0’.
4. The scale is now ready for weighing.
5. Please stand upright, avoid movements on the scale and position your feet equally on the
platform to arrive at the most accurate weight result. The result is indicated in the display,
blinks 2 times and is hold for around 10 seconds.
6. Once you left the scale it automatically turns off after around 6 seconds.
Warning signals:
Maximum capacity of the scale is 200 kg or the equivalent in another weighing unit.
In case the display indicates ‚Err’ the scale has been overloaded.
Always make sure the scale will not be overloaded as a load of over 200 kg may cause unrepairable
damages.
1 060100-Rev000-M35611
Cleaning and Maintenance
Useful remarks:
1. Take always the same scale for weighing because due to tolerances during the production the
zero point of each scale may vary. However, reproducibility of the weighing result is not affected.
2. The scale is rounding results up or down. Weighing two times and getting two slightly different
results means your exact weight is in between the rounding.
3. For utmost accuracy make sure the ground to place the scale is even and solid.
4. To get a reliable statistical weighing result take weight every day at the same time preferably after
getting up and dressing.
5. For cleaning just take a damp cloth or common disinfection products. Do not use any aggressive
cleaning fluids.
6. Keep the scale away from any influence of water as this will damage the electronic part.
CE Declaration of Conformity
It is hereby certified that this product meets the basic safety requirements laid down in the
Directive of the Council applicable to the harmonisation of the legal provisions of the member
states with regards to the electromagnetic compatibility (89/336/EEC).
Warranty – Liability
ADE will repair or replace this product within a period of 2 years from date of delivery applying to
defects occurred due to poor material or workmanship (presentation of invoice is necessary). All
moveable parts – batteries, cables, mains units, rechargeable batteries etc. – are excluded. Warranty
does not include natural wear, damages caused by incorrect or negligent handling, overuse or
unsuitable or improper storage. The cost of transport will be borne by the customer should the
equipment be located anywhere other then the customer’s premises. In the event of transport
damage, claims under warranty can be accepted subject to using the complete original packaging and
the equipment secured the way it was packed and secured originally. All the packaging should
therefore be retained.
Any warranty claim will be rejected if the equipment is opened by persons not authorized expressively
by ADE to do so.
Customers abroad are kindly requested to contact their local dealer for any warranty claim, customer
service and spare parts.
060100-Rev000-M35611 2
Tecnical Data
3 060100-Rev000-M35611
Distributor
060100-Rev000-M35611 4