Professional Documents
Culture Documents
Examples: Dimensions Created With View-Level Dimensioning: Drawings Define Automati Automatic Dime
Examples: Dimensions Created With View-Level Dimensioning: Drawings Define Automati Automatic Dime
Examples: Dimensions
created with view-level
dimensioning
See below for examples of dimensions created with different settings in
the Dimensioning Rule Properties dialog box.
Overall dimensions
Edge shape
Secondary parts
1 of 6 5/15/2016 9:38 PM
Examples: Dimensions created with view-level dimensioning | Tekla Us... http://teklastructures.support.tekla.com/2016/en/dra_example_dimensio...
Holes
Recesses
Distance to grid
2 of 6 5/15/2016 9:38 PM
Examples: Dimensions created with view-level dimensioning | Tekla Us... http://teklastructures.support.tekla.com/2016/en/dra_example_dimensio...
Filter: Embeds
Filter: Bolts
To get the location of every bolt in the bolt group dimensioned, set
Dimension to to midpoint :
3 of 6 5/15/2016 9:38 PM
Examples: Dimensions created with view-level dimensioning | Tekla Us... http://teklastructures.support.tekla.com/2016/en/dra_example_dimensio...
Start point and end point option will dimension the first and the
last reinforcing bar in a group:
If you want to have separate dimension lines for reinforcing bars that
are not of the same size, set the Combine on one line to By position
number :
4 of 6 5/15/2016 9:38 PM
Examples: Dimensions created with view-level dimensioning | Tekla Us... http://teklastructures.support.tekla.com/2016/en/dra_example_dimensio...
To make the rule creation easier, the midpoint setting of the Dimension
to option works so that it will create dimensions to start point and end
point of the reinforcing bars that are parallel to the view plane:
5 of 6
See also 5/15/2016 9:38 PM
Examples: Dimensions created with
Dimensioning view-level
rule dimensioning | Tekla Us...
properties http://teklastructures.support.tekla.com/2016/en/dra_example_dimensio...
Quick feedback
Did you find what you were looking for? *
Yes
Partly
No
Submit
6 of 6 5/15/2016 9:38 PM