Professional Documents
Culture Documents
Catalog 293
Catalog 293
SURPLUS
Vertical
Air Tank
ITEM 4-1957 SOURCE CODE
$249.95
SURPLUS CENTER
• Air tank is removed from
a complete compressor
returned to original retailer
for motor or compressor
CENTER
warranty. Vertical steel tank
with blue exterior paint.
Mount on top with holes ®
for compressor and holes
for motor. Certified by Twin
Lakes Tanks.
CATALOG 293
SPECIFICATIONS ton motor for use in open and closed loop
• Capillary Tube 48˝ • Bezel black • New, AMT Schmid GmbH gearmotors hydraulic systems. Pilot operated servo
with brake. Originally made for wheel valve on motor controls speed and direc-
chairs as a right side drive motor. Release tion from 1.9 to 6.5 cu. in. per revolution.
6.6 GPM 12 Volt DC shaft on gearbox to engage/disengage SPECIFICATIONS
Double Selector output shaft to free wheel. Ideal for high
torque DC applications.
• Disp. Max. 6.5 cu. in.
/ rev.
• Rotation Reversible
• Mount Four bolt on
Valve SPECIFICATIONS • Rotation Reversible • Disp. Pilot Control Valve 200mm (7.874˝) bolt cir-
• Speed 162 RPM no load • Duty Intermittent Setting Range 1.9 cu. in. cle with 160mm (6.299˝)
2020 EDITION
ITEM 9-12390 max (nominal perfor- • Enclosure TEFC /rev. to 6.5 cu. in. / rev pilot
$59.95 mance rating)
• Voltage Motor 24 VDC
• Base Mount 6 bolt tapped
M6x1
• Control Valve Pilot
operated
• Shaft 40mm dia.
18T spline, DIN 5480
• New, WALVOIL model DFE080 12 volt • Motor Type Piston W40x2x30x18x9g
DC solenoid operated double selector • Voltage Brake 12 VDC • Shaft 23.5mm max. dia.
• Amperage 4.5 Amps no x 35.8mm 14.25° ta- • Pressure 6000 PSI max. • Ports Size 16 4 bolt
valve. Allows one directional valve to op- load pered w/woodruff key and • Pilot Control Valve Pres- flange 27.8mm (1.094˝)
erate two independent cylinders. Energiz- • Torque 796 in.lbs. M12x1.75 threaded end sure 348 PSI x 57.2mm (2.25") bolt
ing coil shifts from cylinder 1 to cylinder • Torque Brake 530 in. lbs. • Size 14˝ x 31/2˝ x 5˝ • Flow 100 GPM max. centers w/25mm (1˝) port
2. Ideal for adding a “thumb” to buckets • Gear Ratio 26.2 • Shpg. 19 lbs. • Power 339 HP @ 3550 • Control Ports M12x1.5
on loaders. RPM, 5800 PSI (calcu- with GE-8LM steel line
SPECIFICATIONS ITEM 5-1919-R $119.95 lated) adapters
• Flow Rate 6.6 GPM • Ports Six SAE 4 RH model 013552 • Torque 502 ft-lbs. @ 3550• Case Drain M18x1.5
$119.95
• Pressure 2900 PSI max • Mount Two M6 tapped RPM, 5800 PSI • Size 111/2˝ x 71/2˝ x 131/4˝
• Coil Voltage 12 VDC holes in base ITEM 5-1919-L • Speed 3600 RPM max. • Shpg. 165 lbs.
• Current 3 amps • Size 61/4˝ x 2˝ x 25/8˝ LH model 013551
• Connector Deutsch DT-04 • Shpg. 5 lbs. More Gearmotors on Pages 159-161 Hydraulic Motors on Pages 79-84
2 Just Arrived! California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov 8 www.surpluscenter.com & 800-488-3407 Rotary Cutters 195
12 Volt DC LED Solarland Solar 52˝ Stroke 5620 lbs. Rotary Cutter Gearboxes
Flood Lights Panels 24 Volt DC • Brand new, OMNI GEAR Rotary right angle rotary cutter gearbox. Horizontal input and vertical output downward.
Bevel gears. Large deep groove ball bearings to support output. Cast iron housing.
• New, SUPERAY LED flood
lights. Black powder coated
• New, Multicrystalline
photovoltaic module. Linear Actuator
aluminum waterproof housing. Connect direct to battery RC 30 Series RC51 Series RC71 Series
Kelvin Rating 5700-6700K Day
Light. Stainless steel mounting
for charging or use as 12 volt
DC power source. Aluminum ITEM 5-1842 $189.95
bracket and fasteners. 18˝ wire leads. backing plate with holes drilled • NEW TAKE-OFF, SolFocus P/N 350-
ITEM 12-1074 $29.95 in perimeter. Includes mounting arm and
adjustable angle bracket. 8 ft. wire lead
000266-000 screw jack linear actuator.
Original application for elevation adjustment
Model AP00522G
SPECIFICATIONS
with 5 pin connector. on large solar panels. Features include fe- $126.90 each $191.45 each $284.70 each
• Voltage 12-24 VDC • 120° viewing angle
• Lens 4˝ x 41/4˝
ITEM 22-1365 20 Watt $48.95 male trunnion mount on gearbox, swivel
eye rod end, ACME thread style screw, 23/8˝
• 16 high-powered LED’s. Model SLP020-12U
• Power 48 Watts • Mount M10 x 25mm stud metal square tube screw cover, mounting SPECIFICATIONS FOR ALL SPECIFICATIONS FOR ALL SPECIFICATIONS FOR ALL
• Size 4.25˝ x 1.89˝ x 4.98˝
SPECIFICATIONS • Temperature Range -40°C holes on screw cover to install plunger
• Amps 2.08\1.04 amps to 85°C • CCW input gives CW output • CCW input gives CW output • Input RPM 540/1000
• Shpg. 3 lbs. • Wattage 20 max. style limit switches, expanding billow screw • Input RPM 540/1000 • Input RPM 540/1000 • Input HP 35-83
• Lumens 2200
• Voltage 17.2 operating, • Face size 131/4˝ x 213/4˝
ITEM 12-1075 $24.95 21.6 open circuit • Frame Size 22.68˝ x cover and permanent magnet TENV gear-
motor. Rated for 24 volts but will operate
• Input HP 24-40
• Max torque 2800-4667 in.lbs.
• Gear ratio 1:1.93 increaser
• Output RPM 1040/1930
• Max torque 4083-9683 in.lbs.
• Input shaft 13/8˝ dia. x 37/8˝ long 6T spline with
Model AP00520G • Amps 1.16 operating, 1.31 14.06˝ x 1.18˝ • Output shaft 19/16˝ dia. 12 tooth tapered spline with • Input HP 24-40 5/16˝ dia. pinhole
short ciruit • Shpg 12 lbs. on 12 volts at reduced speed and output.
SPECIFICATIONS Ships in two boxes, requires re-assembly. threaded end 41/2˝ total length • Max torque 2800-4667 in.lbs. • Output shaft 2˝ dia., 15 tooth tapered spline with
• 60° viewing angle
• Voltage 12-24 VDC
• 9 high-powered LED’s. • Lens 33/4˝ x 33/4˝ ITEM 22-1366 30 Watt $59.95 SPECIFICATIONS
• Duty Intermittent
• Blade hub 2.95˝ dia. x 2.02˝
stepped down to 2.5˝ dia. x 0.27˝
• Output shaft 2˝ dia., 15 tooth tapered spline with
threaded end 45/8˝ total length
threaded end 45/8˝ total length
• Blade hub 3.94˝ dia. x 2.275˝
• Power 27 Watts • Mount M10 x 25mm stud Model SLP030-12U • Stroke 525/8˝ then tapers down to 2.183˝ dia. over 0.315˝ • Blade hub 3.94˝ dia. x 2.275˝ stepped down to 2.5˝ dia. x 0.45˝
• Amps 1.25\0.625 amps • Size 3.93˝ x 1.57˝ x 4.64˝ • Voltage 24 VDC • Trunnion Mount Pin Size • Mount 4 holes on 6.8˝ dia. B.C. stepped down to 2.5˝ dia. x 0.45˝ then tapers down to 2.175˝ dia. over 0.25˝
SPECIFICATIONS • Temperature Range -40°C
7/8˝ dia meter female by
• Lumens 1293 • Shpg. 2 lbs. • Wattage 30 max. to 85°C • Force 25kN (5620 lbs) • Pilot 51/4˝ dia. then tapers down to 2.175˝ dia. over 0.25˝ • Mount 4 holes on 8˝ dia. B.C.
• Extension Speed No Load 1˝ deep • Size 101/4˝ x 7˝ x 7˝ • Mount 4 holes on 6.8˝ dia. B.C. • Pilot 55/8˝ dia.
• Voltage 17.2 operating, • Face size 193/16˝ x 207/16˝
Solar 12 Volt 21.6 open circuit • Frame Size 21.3˝ x 20.08˝ 73/8 in/min • Rod End Pin Size 7/8˝
• Gear Ratio 25 input shaft • Size 753/4˝ x 51/8˝ x 195/8˝
• Shpg. 54 lbs. • Pilot 51/4˝ dia.
• Size 101/4˝ x 7˝ x 7˝
• Size 123/8˝ x 93/4˝ x 93/4˝
• Shpg. 89 lbs.
• Amps 1.74 operating, 1.93 x 1.18˝ ITEM 13-1526
Battery short ciruit • Shpg 19 lbs.
revolutions per 1˝ of stroke• Shpg. 99 lbs.
SPECIFICATIONS
• Shpg. 59 lbs.
ITEM 13-1533
Chargers ITEM 22-1367 45 Watt $109.95 • ITEM 5-1842-A $129.95 • Model 250001
• Input shaft 13/8˝ dia. x 3˝ long with 1/2˝ dia. pinhole
ITEM 13-1529
SPECIFICATIONS
SPECIFICATIONS
• Model 250598 • Gear ratio 1:1.21 increaser
• New, SUNFORCE, solar battery charger. Model SLP045-12U • Same as ITEM 5-1842 above except used.
• Gear ratio 1:1.47 increaser • Model 250746 • CW input gives CW output • Output RPM 650/1200
Ideal to maintain boat, auto and electric SPECIFICATIONS • Output RPM 790/1460 • Input shaft 13/8˝ dia. x 37/8˝ long 6T spline RPM
fence systems without having to be near an
AC power source. Includes hookup wire,
• Wattage 45 max. • Temperature Range -40°C
to 85°C
12 Volt DC Double ITEM 13-1527 with 5/16˝ dia. pinhole
ITEM 13-1534
• Voltage 17.2 operating,
battery clamps and cigarette lighter plug. 21.6 open circuit • Frame Size 21.02˝ x Acting SPECIFICATIONS
• Model 250179
ITEM 13-1530 SPECIFICATIONS
Blocking diode prevents reverse discharge. • Amps 2.62 operating, 2.92 26.67˝ x 1.18˝ SPECIFICATIONS
Power • Input shaft 13/8˝ dia. x 37/8˝ long 6T spline
• Model 250492 • Gear ratio 1:1.46 increaser
ITEM 22-1368 $29.95 short ciruit • Shpg 29 lbs.
Unit
with 5/16˝ dia. pinhole
• Model 250618
• Input shaft 13/8˝ dia. x 3˝ long with 1/2˝ dia. pinhole
• CW input gives CCW output • Output RPM 790/1460
RPM
Model 50022 12 Volt DC Single ITEM 13-1528
SPECIFICATIONS
• Watts 5 max.
• Type Amorphorous
• Cables 91/2 ft. w/bullet Acting ITEM 9-12514 $309.95 SPECIFICATIONS
• Model 250045
ITEM 13-1531
SPECIFICATIONS
• Volts 15 rated, 24 open connectors • New MAVERICK by DALTON. Hydraulic
• Model 251026
circuit • Size 137/8˝ x 131/4˝ x 9/16˝ Power power unit for operating a double acting • Input shaft 13/8˝ dia. x 3˝ long with 1/2˝ dia. pinhole
• Gear ratio 1:1.93 increaser • Input shaft 13/8˝ dia. x 3˝ long with 1/2˝ dia. pinhole
• Current 350mA • Shpg. 4 lbs. hydraulic cylinder. Ideal for many appli-
Unit cations including dump trailers, flatbed • Output RPM 1042/1930 • Blade hub 3.94˝ dia. x 1.75˝
stepped down to 2.5˝ dia. x 1.12˝
dumps, forklift stackers, lift gates, pal- then tapers down to 2.175˝ dia. over 0.25˝
let trucks, aerial lifts, auxiliary power and
ITEM 9-12513 $279.95 many other applications. Handheld remote
with detachable 14 ft. cord.
3:1 Right Right Angle 1:1.46 Speed
• New HYDRO-TEK. Hydraulic power unit for
operating a single acting hydraulic cylinder. SPECIFICATIONS Angle Gear Drive Increaser
Power up, gravity down. 12 Volt DC solenoid • Power 2 HP
• Voltage 12 DC
• Valve Operation 12 Volt
DC Solenoid Gear ITEM 13-1525 ITEM 13-1532
release valve with check valve for directional
ITEM 22-1369
Model 50033
$59.95 control of single acting cylinder. Built-in
check and adjustable main relief valve.
• Amperage 260 Amps
• Duty Intermittent
• Ports SAE 6
• Mounting Horizontal
Reducer $200.50 $275.35
• Flow 1.2 GPM at 1500 PSI • Reservoir Size 2 Gallon • Brand new, OMNI • Brand new, OMNI
SPECIFICATIONS • Type Amorphous SPECIFICATIONS • Pressure 3000 PSI max. • Reservoir Size Useable GEAR Model PHD26HD GEAR 250372 Model
• Watts 15 max. • Cables 12 ft. w/bullet • Power 2 HP • Valve Operation 12 Volt 1.5 Gallon vertical, right angle gearbox. RC-61 right angle rotary
connectors DC Solenoid • Relief Valve Setting Ad-
• Volts 15 rated, 24 open • Voltage 12 DC justable set @ 3000 PSI • Reservoir Material Plastic Originally manufactured for cutter gearbox. Hori-
circuit • Size 381/2˝ x 131/4˝ x 3/4˝ • Amperage 130 Amps • Port SAE 6 • Size 22˝ x 7˝ x 8˝
• Mounting Horizontal • Pendant Control Yes PTO driven post hole digger zontal input and vertical
• Amps 1 Amp • Shpg. 13 lbs. • Duty Intermittent • Valve Type Double Acting • Shpg. 34 lbs.
ITEM 13-1602 systems. Tapered roller bearings. Spring output downward. Bevel
• Flow 1.2 GPM at 1500 PSI • Reservoir Size 2 Gallon
120 Vac • Pressure 3000 PSI max. • Reservoir Size Useable
1.5 Gallon 4˝ x 1˝ Bolt Hole $496.00
loaded triple lip seals. Clockwise input
rotation gives clockwise output rotation.
gears. Large deep groove
ball bearings to support out-
Submersible • Relief Valve Setting Ad-
justable set @ 3000 PSI • Reservoir Material Poly Caster w/Brake • Brand new. OMNI-GEAR LR-200 series Cast iron housing. Designed to free hang put. Four 5/16˝-18 tapped holes
• Size 25˝ x 7˝ x 8˝ model 254190 right angle gearbox. One from a supporting structure or boom that is on 41/8˝ dia. B.C. CCW input gives CW
Pump • Pendant Control No
• Valve Type Single Acting • Shpg. 28 lbs. ITEM 1-5158 piece cast iron gear case and bearing connected to it with a 7/8˝ dia. pin at the top output.
ITEM 2-1467
▲!
15x6.00-6 Foam Filled $1.99 caps. Roller bearings. Spiral bevel gears. of the gearbox housing. Four 3/8˝-16 tapped
holes on 33/8˝ dia. B.C. to mount input shaft
SPECIFICATIONS
$29.95 Flat Free Tire
• New, TENTE swivel bolt-hole caster.
Double ball bearing in swivel head. Hous-
Hollow output with full length keyway.
Ships without oil, user must add oil prior shield and four 3/8˝-16 tapped holes on 41/8˝
dia. B.C. to mount output shaft shield.
• Gear ratio 1:1.46 increaser
• Input RPM 540/1000
• Output RPM 790/1460
• New, DK-5000 submersible water pump. to use per user’s manual.
Ideal for fountains,ponds,machine tool ing made of zinc-plated, pressed steel. SPECIFICATIONS • Input HP 35-72
ITEM 1-5462 SPECIFICATIONS • Max torque 4083-8400 in.lbs.
coolant. Plastic housing, plastic impeller. Total lock brake locks both swivel and • Gear ratio 2.92:1 • HP input max. 44 HP
$29.95
• Ratio 3:1 • Input shaft 13/8˝ dia. x 37/8˝ long 6T spline with
Slotted intake cover can be easily removed wheel when engaged. Supplied unassem- • Input Power 32 HP continuous • RPM 540 input max. • Torque 5133 lb.-in. max.
for cleaning. Four suction cups on base. 5/16˝ dia. pinhole
• NEW, Semi-Pneumatic foam filled flat free bled for easier mounting. • Input Speed 2000 RPM max. • 38 oz. oil capacity • Output shaft 2˝ dia. 15 tooth tapered spline with
Includes a brass adapter to 3/8˝ ID tubing. SPECIFICATIONS • Wheel Tread Material • Output Torque 950 in.lbs.
• Inner width of mounting ears 41/4˝ threaded end. 45/8˝ total length
tire on a steel rim. Polyurethane • Throat depth of pin 13/16˝
SPECIFICATIONS • Wheel Diameter 4˝ • Input Shaft 1˝ diam. x 13/4˝ w/1/4˝ crosshole and snap • Blade hub 3.94˝ dia. x 2.275˝ stepped down
• Voltage 120 VAC • Port 3/4˝ MGHT (Standard
SPECIFICATIONS • Wheel Width 1˝ • Wheel Tread Color Grey • Input shaft 11/4˝ dia. x 2˝ smooth with
• Size 15x6-6˝ • Bore 3/4˝ ring groove to 2.5˝ dia. x 0.45˝ then tapers down
• Power Consumption 105 Garden Hose Male) w/ 3/8˝ • Load Capacity 165 lbs. • Caster Wheel Core Materi- 5/16˝ dia. pin hole to 2.175˝ dia. over 0.25˝
• Outside Diameter 13˝ dia. • Bore Thru-Length 33/8˝ al Polypropylene • Output Shaft Hollow 1˝ diam. x 53/4˝ w/ 1/4˝ keyway • Output shaft 2˝ x 43/8˝ smooth shaft with
Watts ID hose adapter • Mounting Height 4.75˝ • Mount 4 holes on 8˝ dia. B.C.
• Flow 20 GPM open flow • Power Cord 15 ft. long, • Cross Section 51/4˝ Wide • Hub Type Centered • Caster Wheel Bearing • Mount Four 3/8-16 tapped holes, 41/4˝ sq. two 1/2˝ dia. pin holes 23/4˝ and
• Brake Total Lock • Pilot 55/8˝ dia.
• Max Head 15 ft. • Tread Turf Tread • Bearing Roller Bearing Plain • Size 61/2˝ x 61/4˝ x 41/8˝ 33/4˝ bearing to center hole • Size 123/8˝ x 93/4˝ x 93/4˝
3-prong plug • Bolt Hole 0.43˝ center • Shpg. 23 lbs. • Size 91/2˝ x 81/4˝ x 75/8˝ • Shpg. 51 lbs.
• Size 7˝ x 4˝ x 5˝ • Tread Width 5˝ • Shpg. 9 lbs. hole, Offset • Shpg. 1 lb. • Shpg. 84 lbs.
• Shpg. 8 lbs.
& 800-488-3407 Index 3
CONTENTS
PRODUCT PAGE PRODUCT PAGE PRODUCT PAGE
Acme Rod (Lead Screws)........139 Gear Reducers........125 - 132, 195 Phase Converters....................148
Air Hose Clamps...............92 - 93, 146 Power Supplies...............170 - 171
Cylinders................................... 116 Hydraulic Pressure Gauges.............100 - 102
Compressors..................111 - 112 Cylinders............................. 47 - 78 PTO Shafts...............................138
Pressure Switches................... 115 Filters,Strainers.................. 89 - 91 Pulleys.............................142 - 143
Tanks................................111, 196 Fittings.............................. 94 - 101 Pumps
Valves..............................113 - 117 Gauges............................100 - 102 Centrifugal........................ 119-120
Ammo Boxes................................8 Hose Clamps...................... 92 - 93 Diaphragm......................... 119-120
Automotive............................4 - 24 Hose Sleeve.................................85 Fuel Transfer...................... 10 - 11
Automotive Gauges..8-9, 100, 196 Oil Coolers.......................... 88 - 89 Pressure Washer...................... 118
Backup Alarms & Cameras...9, 17 Motors................................. 79 - 84 Roller......................................... 118
Ball Valves.........................33, 117 Power Packs..................... 2, 38-39 Submersible..........................2, 119
Battery Chargers.......................11 Power Team 10,000 PSI..............40 Rake Teeth...............................109
Bearings..........................122 - 125 Pumps................... 2, 38 - 45, 196 Relays.............................170 - 171
Rod Ends.................133, 140 - 141
Blowers...........................165 - 169 Reservoirs........................... 86 - 87
Roller Chain.....................137, 146
Cab Heaters.................................9 Quick Couplers............................85
Rotary Cutter Gearbox ...135, 195
Cable Ties................................110 Valves, Control................... 25 - 32
Seats...................................12 - 16
Capacitors................................178 Valves, Flow................. 33, 36 - 37 Shaft Collars............................138
Casters........................2, 186 - 194 Valves, Relief........................34, 36 Shafting....................................139
Clutches...................................133 Valves, Selector................. 33, 196 Shaft Mount Reducers.....129, 132
Counters...................................110 Valves, Solenoid................. 34 - 35 SHIPPING INFORMATION.106-107
Couplings........................140 - 141 Keystock..................................138 Solar Panels.................................2
Drawer Slides...........................109 Lights..................................18 - 22 Sprockets........................134 - 136
Engines...................................4 - 7 Limit Switches.........................172 Switches.........................174 - 177
Extension Cords.......................173 Linear Actuators.........2, 162 - 163 Toggle Pliers............................105
Fans.................................165 - 169 Motors Trailer Jacks..............................23
Fuel Transfer Pumps...........10 - 11 AC.......................... 147 - 155, 196 U-Joints....................................139
Gauges............8, 9, 100 - 102, 196 Slide Bases............................... 147 V-Belts.............................144 - 145
Gearboxes.......125 - 132, 135, 195 Controllers............. 148, 158, 162 Variable Frequency Drives......148
Gearmotors DC.......................... 156 - 161, 164 Water Pumps...............2, 118 - 121
AC.............................................. 155 3 Phase............................147 - 149 Wheels.................2, 179 - 185, 196
DC.......................... 159 - 161, 196 ORDERING INFORMATION.106-108 Wireless Controls.....................177
Call: 800-488-3407
at our website. Our knowledgeable staff would be glad to help you find just
the right item for your project.
Fax: 877-474-5198 • If you would like to pick up an order here, call or email your order. Please
note that orders picked up in Lincoln are subject to Nebraska sales tax.
24 hours a day, 7 days a week To save time you may call, fax or email your order before pickup.
We ship via UPS, USPS and Fedex Freight We’ll have it ready when you get here!
Find detailed ordering & shipping information on pages 106 - 107
• 1015 West O Street Lincoln, NE 68528
Buying and Selling •Phone 402-474-5167
Industrial Surplus Since 1933 • Fax 402-474-4359
showroom@surpluscenter.com
What is the Surplus Center?
• We buy top quality products from overstocks, design changes and Showroom Hours:
bankruptcies in order to pass great savings on to our customers. We buy
8-5 Mon.-Fri. 8-Noon Sat
clean, new items because we know how important product reliability is
to our customers. In addition to our surplus items, we also stock products
from major manufacturers to keep the products that you need on hand. • It’s easy to get here from any
direction. Our warehouse is
All of our products fit into these product classifications:
approx. 1 mile from Interstate
• Brand new – New products that we buy directly from the manufacturer 80. See the map for details.
and keep in stock. These items include the manufacturer’s warranty.
• New – Excess inventory that is new and unused. Quantities of surplus Next time you are in the area
items are limited; once we sell out we cannot order more. We support please stop in.
these items with a 90 day warranty.
• New Takeoffs – Removed from UNUSED machinery. We support these Prices subject to change.
items with a 90 day warranty. Quantities limited to surplus
• Used – Equipment that was in use before we bought it. Applies to only
items on hand.
a few of our products. We support these items with a 90 day warranty.
• All of our products have a warranty (full warranty details on page 106.)
4 Vertical Shaft Engines California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov
Torque 10 HP
Briggs & Tecumseh ITEM 28-1969 $129.99
• New, HONDA vertical shaft engine. In-
Stratton ▲
! Engine cludes muffler. Engine blade brake. Fuel
Snowblower shutoff valve. Fixed speed throttle.
SPECIFICATIONS • Shaft 25mm dia. x 3-5/32˝
Engine ▲! • Model GCV160-GJAEA w/dual woodruff key slots
ITEM 28-1940 $99.95 ITEM 28-1741
• Displacement 160 cc
• Torque 6.9 lb-ft @ 2500
• Mount 4 hole, 8˝ bolt
circle
• New, Briggs & Stratton horizontal shaft
engine. Snowblower applications, no air
cleaner. Fixed speed governor. 60 watt
$139.95 RPM
• HP 4.4 @ 3600 RPM
• Fuel Tank 1 quart
• Size 14.4˝ x 13˝ x 11˝
• New, TECUMSEH horizontal engine • Start Recoil • Shpg. 32 lbs.
AC alternator. Manual choke with primer built for driving electric generators. Cast
bulb. Dual ball bearing crankshaft. Push/
Pull keyswitch. Wire muffler guard. Steel iron sleeve, fixed speed governor. Low oil
shutdown. Lighted on/off switch. Not for
5/8˝ Ball
fuel tank. Extended crankcase drain.
Oversized hand grip for use with gloves. sale or use in California. Bearing
SPECIFICATIONS • Speed 3600 RPM SPECIFICATIONS • Shaft 13/8˝ dia. x 11/8˝,
• Model LH358XA-15493 stepped to 7/8˝ dia. x 17/8˝ ITEM 1-5456-58
• Model 10D136-0007-F9 • Start Recoil
• Engine Family
FBSXS.1631SC
• Shaft 3/4˝ dia. x 3.93˝ w/
keyway,tapped 3/8-24.
• Power 10 HP
• Speed 3600 RPM
then tapered
Overall length 4.33˝
$1.99
• Mount 4 hole, 63/8˝ x 31/8˝ • Disp. 358 cc tapped 5/16-24 no keyway • New, model 203KRR2 shielded ball
• Displacement 163 cc bearing.
• Torque 7.5 ft-lbs. @ 3600 • Fuel Tank 3 quart • Start recoil • Mount 31/4˝ x 63/8˝
RPM • Size 141/2˝ x 101/4˝ x 131/4˝ • Shaft horizontal • Accessory mount SPECIFICATIONS
• HP (calculated) 4.5 @ • Actual Weight 35 lbs. • No fuel tank 4 bolt on 35/8˝ B.C. • Bore 5/8˝ • Width 18.2mm
3600 RPM • Dimensional Shpg. 63 lbs. • Size 12˝ x 131/2˝ x 13˝ • Shpg. 60 lbs. • Outside Dia. 40mm • Shpg. 1/4 lb.
6 Engines California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov 8 www.surpluscenter.com
179cc LCT 6.5 HP 9.00 Torque
Storm Force Recoil Recoil
Snowblower Start ▲! Start
With 6:1 Gear
Engine ▲! Reduction ! Engine
▲
ITEM 28-1967 ITEM 28-1853
$49.95 $399.95 ITEM 28-1862
• New, LCT horizontal shaft engine with
recoil starter. Manual choke and fixed
• New, BRIGGS & STRATTON Vanguard
commercial series engine. External 6:1 $199.95
throttle. Cast iron cylinder sleeve. Over- gear reduction. Dura-Bore cylinder sleeve, • New, BRIGGS & STRATTON 900 Series
head valves and dual ball bearings. No low oil shutdown, overhead valves, Du- engine. Features include Dura-Bore cast
air filter. Primer bulb and key were origi- al-Clean air cleaner, and TransportGuard iron cylinder sleeve, electronic ignition,
fuel shut off. EPA compliant for all 50 overhead valves. Dual-Clean air cleaner,
nally to be mounted in snowblower hous- states.
ing. Large pull handle for use with gloved engine mounted controls, compression
SPECIFICATIONS release, accessory mount and fuel shut
hands. Originally for Husqvrana. • Model 13L352-0049-F8 • Shaft horizontal off. EPA compliant for all 50 states.
SPECIFICATIONS • Crankshaft 3/4˝ dia. x 27/16˝ • Power 6.5 HP • Shaft 3/4˝ dia. x 17/8˝
• Model PW3HK185001PAB w/3/16˝ keyway, tapped • Bore/Stroke 2.69˝ x 2.20˝ w/keyway tapped 5/16-24
SPECIFICATIONS
3/8-24 • Disp. 12.51 cu. in (205 cc)• Fuel tank 4.33 qt. (4.1L) • Model 12S4320128F8 • Shaft horizontal
• Torque 8.25 lb-ft @ 3070 • Mount 31/8˝ x 63/8˝ • Torque 9 ft-lbs. • Shaft 3/4˝ dia. x 227/64˝
RPM • Speed 600 RPM • Size 151/2˝ x 131/2˝ x 141/4˝
• Accessory Mount 4 bolt, • Start recoil • Shpg. 55 lbs. • Power (calculated) w/keyway tapped 5/16-24
• Disp. 179 cc. 35/8˝ bolt circle 5.8 HP at 3600 RPM • Accessory mount
• Speed 3600 RPM • Fuel Tank none
• Start Recoil • Size 14˝ x 101/4˝ x 1/2˝ 2.5 HP • Bore/Stroke 3.125˝ x 2.32˝ 4 Bolt 35/8˝ B.C.
• Disp. 12.51 cu. in (205 cc) • Fuel tank 3 qt.
• Shaft Horizontal • Shpg. 36 lbs. PowerPro • Speed 3600 RPM • Size 93/4˝ x 141/2˝ x 16˝
28-1668-M
28-1666-A
28-1664
ITEM 1-3207
$340.30 • Brand new, BLACK TALON steel frame and
vinyl cover replacement universal high back
ITEM 1-3548 • Brand new, BLACK TALON Model
seat. Adjustable weight suspension with 31/2˝
$464.55 36000BK steel frame and black vinyl cover
replacement universal high back seat. Inte- stroke. Ribbed seat cushion for air flow. Ad-
justable base angle. Lever controls seat to
• Brand new, BLACK TALON Model grated suspension for low profile. Textured
33001BK steel pan with vinyl backed fabric seat cushion for air flow. Lever controls seat slide forward and backwards. Intended for
cushion. Swivel base for easy entry and exit to slide forward and backwards. Arm rest. utility, specialty, industrial tractors, equipment.
of operator position. Adjustable back rest Intended for utility trucks, fork lifts, skid SPECIFICATIONS
and arm rests. Back rest folds flat. Sus- steers and other construction equipment. • Mounting bolt pattern (width x depth)
pension with weight adjustment and 3 po- depth universal bolt pattern mounting plate
SPECIFICATIONS • Size 203/4˝ x 235/8˝ x 201/2˝ • Shpg. 44 lbs.
sition height adjustment. Seat slides. Ideal • Mounting bolt pattern (width x depth)
replacement for loaders, backhoes, con-
struction equipment, street maintenance,
width 111/4˝
slotted slides allow for depth spacing of 1˝ to 111/4˝ ITEM 1-3213-BK $106.45
utility tractors, combines, cotton pickers, maximum depth 111/4˝ • Model 51000BK03UN. Black vinyl.
sprayers, forage harvester, hay cuber and
other specialty industrial tractors.
• Size 23˝ x 231/4˝ x 24˝
High
• Shpg. 68 lbs.
ITEM 1-3213-BL $106.45
SPECIFICATIONS • Model 51000BL03UN. Blue vinyl.
• Bolt pattern (width x depth)
101/4˝ x 101/2˝ 101/4˝ x 11˝
Back ITEM 1-3213-YE $106.45
101/4˝ x 111/2˝ 101/4˝ x 123/4˝ Seat ▲! • Model 51000YE03UN. Yellow vinyl.
• Size 25˝ x 24˝ x 34˝ • Shpg. 96 lbs.
Special handling requires truck freight only. Universal Fold-Down
Skid Steer ZTR Implement
Fold-Down Seat Seat ▲!
With Armrests & ▲
! ITEM 1-3208
Lumbar Support $283.60 ITEM 1-3206
ITEM 1-3752 • Brand new, BLACK TALON Model
$258.10 44000BK steel frame and black water
resistant Cordura® fabric cover replacement
$123.00
• Brand new, BLACK TALON Model
universal high back seat. Three position lum- 35500BK steel frame and black vinyl cover
bar support. Adjustable armrests and upper replacement universal high back seat.
backrest. Backrest folds forward and reclines Fold-down back cushion. Textured seat
• Brand new, BLACK TALON Model backwards. Document pouch. Lever con-
44002BK steel frame and black heavy cushion for air flow. Lever controls seat
trols seat to slide forward and backwards. In- to slide forward and backwards. Arm rest.
duty vinyl cover, ZTR or skid steer seat. tended for utility trucks, fork lifts, skid steers
3 position lumbar support. Adjustable Intended for utility trucks, fork lifts, skid
and other construction equipment. steers and other construction equipment.
tilt back can be reclined or folded down. SPECIFICATIONS
Lever controls seat to slide forward and SPECIFICATIONS
• Mounting bolt pattern (width x depth) • Mounting bolt pattern (width x depth)
backwards. Adjustable arm rests. adjustable width 7˝ to 131/2˝ adjustable width 51/2˝ to 151/8˝
SPECIFICATIONS slotted slides allow for depth spacing of 1˝ to 13˝ slotted slides allow for depth spacing of 1˝ to 111/4˝
• Mounting bolt pattern (width x depth) maximum depth 13˝ maximum depth 111/4˝
Adjustable width 7˝ to 13.5˝ • Size 20˝ x 24˝ x 26˝ • Size 211/4˝ x 23˝ x 181/2˝
Slotted slides allow for variable depth spacing • Actual weight 44 lbs. • Shpg. 53 lbs. (oversize) • Actual weight 36 lbs. • Shpg. 40 lbs. (oversize)
Maximum depth 13˝
• Size 24˝ x 20˝ x 26˝ Universal Universal
• Actual weight 42 lbs. • Shpg. 72 lbs. (oversize)
2 Piece 2 Piece
Universal Utility Implement Implement
Seat ▲! Seat ▲! Seat ▲!
With Suspension
ITEM 1-3212
ITEM 1-3205
$101.95 $86.05
• Brand new, BLACK TALON Model
• Brand new, BLACK TALON Model 50800BK steel frame and black vinyl cover
ITEM 1-3545 34000BK steel frame and black vinyl cover replacement universal high back seat.
$188.80 replacement universal high back seat.
Ribbed seat cushion for air flow. Lever con-
Ribbed seat cushion for air flow. Lever con-
trols seat to slide forward and backwards.
• Brand new, BLACK TALON Model
51200BK steel framed vinyl covered trols seat to slide forward and backwards. Intended for utility trucks, fork lifts, skid
cushion utility seat. ideal replacement for Intended for utility trucks, fork lifts, skid steers and other construction equipment.
utility tractors, industrial tractors and other steers and other construction equipment. SPECIFICATIONS
specialty mobile equipment. Sliding base. SPECIFICATIONS • Mounting bolt pattern (width x depth)
Adjustable weight suspension. • Mounting bolt pattern (width x depth) adjustable width 71/2˝ to 13˝
45/16˝ diam. bolt holes • Size 193/4˝ x 183/8˝ x 183/4˝ depth 111/2˝
SPECIFICATIONS • Size 193/4˝ x 195/16˝ x 231/4˝ adj. width 51/2˝ to 151/8˝ • Actual weight 26 lbs. • Size 193/4˝ x 191/2˝ x 161/2˝
• Universal bolt pattern • Shpg. 43 lbs. depth 11˝ • Shpg. 44 lbs. (oversize) • Actual weight 28 lbs. • Shpg. 36 lbs. (oversize)
& 800-488-3407 California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov Seats & Accessories 13
Exmark Replacement Forklift Seat ▲
!
ITEM 1-5446
$368.95
$179.95 ITEM 1-3528 • Brand new, BLACK TALON forklift seat
• New factory original Exmark gray/black
vinyl seat. Removed from new mowers
when upgrade seats were installed. Con-
$110.90 with integrated suspension. Steel frame,
foam filled black contoured vinyl seat
• Brand new, BLACK TALON Model with hip restraint and operator presence
structed of heavy duty vinyl over foam 53000BK03UN replacement KUBOTA switch. Backrest tilts up 30° in either
cushion. Steel frame. Flip up arm rests. seat. Steel frame heavy duty black vinyl direction. Seat slides. Document holder
Contoured back cushion. Adjustable seat covering on high density foam. Two drain integrated into backrest. Ideal for forklifts,
slides. Includes operator presence switch. holes in the base of the seat. commercial turf, construction equipment,
Retractable seat belt. • Replacement seat for many models skid steers, specialty vehicles and utility
SPECIFICATIONS • Overall Size 24˝ x 22˝ of Kubota, Kumiai, Mahindra, Massey tractors/vehicles.
• Seat Surface 19˝ x 16˝ x 21˝
Ferguson, Mitsubishi, Rhino, Satoh, White, SPECIFICATIONS • Slots mounting patterns
• Backrest 17˝ high • Actual Weight 42
Yanmar. • Mounting Width center 10.68˝, 11˝
• Bolt Pattern 11.25˝ x 11˝ • Ships Oversize 100 lbs. • Specific model numbers can be found at • Threaded mounting Depth centers 121/2˝, 11˝
www.surpluscenter.com. patterns 5/16-18 • Weight adj. 110 to 242 lbs.
Seat SPECIFICATIONS
• Width center 111/4˝,
11˝, 10˝, 91/2˝, 8˝
• Slide adj. range 6˝
• Size 23.62˝ x 24.41˝ x 22.63
Switch • Bolt patterns: • Depth centers 11˝ • Actual weight 65 lbs.
ITEM 11-3499 $3.99 6˝ x 2˝, 6˝ x 4˝, 7˝ x 15/8˝, • Size 211/2˝ x 17˝ x 18˝
71/2˝ x 2˝, 71/2˝ x 4˝, • Actual weight 14 lbs.
• Suspension stroke 1.6˝ • Shpg. 78 lbs. (oversize)
ITEM 1-3542
ITEM 1-3751 ITEM 1-3541 $82.20
$168.25 $124.25 • Brand new, BLACK TALON Model
• Brand new, BLACK TALON Model 52010BK compact tractor seat with flip
46000BK high-back seat. Heavy duty vinyl • Brand new, BLACK TALON Model forward bracket. Integral polyurethane
cover. Ideal replacement for skid steers. 45000BK high-back contoured seat. steel frame. Waterproof with drain holes.
Also for commercial turf, utility vehicles, Heavy duty vinyl cover. Ideal replace- • Replacement seat for many models of
forklifts, loaders, backhoes and other ment for commercial turf, utility vehicles, Bolens, Cub Cadet, Ford/New Holland, Hi-
construction equipment. Spring loaded forklifts, skid steers, loaders, backhoes nomoto, International Harvester, Iseki, John
lever to lock seat slide. Steel pan, drain and other construction equipment. Spring Deere Utility Orchard Tractors, Kubota,
hole. Accepts operator presence switch. loaded lever to lock seat slide. Accepts Kumiai, Mahindra, Massey Ferguson,
operator presence switch. Mitsubishi, Rhino, Satoh, White & Yanmar.
SPECIFICATIONS
• Bolt pattern
SPECIFICATIONS • Specific model numbers can be found at
9˝ x 11.5˝ 10.25˝ x 11.5˝ • Bolt pattern without slides (width x depth) www.surpluscenter.com.
10.63˝ x 11˝ 11.25˝ x 11.5˝ 71/2˝ x 7˝ 71/2˝ x 111/2˝ 8˝ x 111/2˝
8.2˝ x 5˝ 91/2˝ x 111/2˝ 111/4˝ x 111/2˝ SPECIFICATIONS
• Bolt pattern with slides (width x depth)
• Bolt pattern with slides (width x depth) • Bolt pattern without flip bracket (width x depth)
8˝ x 111/8˝ 91/2˝ x 111/8˝ 111/4˝ x 111/8˝ 61/2˝ x 1.63˝ 71/2˝ x 1.63˝ 71/2˝ x 7˝
• Size 22.5˝ x 18.9˝ x 22.5˝ 8˝ x 111/8˝ 91/2˝ x 111/8˝ 111/4˝ x 111/8˝
• Shpg. 61 lbs. (oversize) • Size 21˝ x 18˝ x 19˝ • Size 171/2˝ x 15˝ x 141/2˝
• Actual weight 26 lbs. • Shpg. 32 lbs. (oversize)
• Actual weight 21 lbs. • Shpg. 100 lbs. (oversize) • Actual weight 12 lbs.
Implement Seats ▲
!
ITEM Color Material Mounting Bolt pattern (Width X Depth) Size Shpg. Price
1-3200 Black Poly 51/4˝ x 41/2˝ 6˝ x 5˝ 71/2˝ x 7˝ 163/16˝ x 181/2˝ x 97/8˝ 12 lbs. $49.90
1-3555 Yellow PVC 6˝ x 5˝ 71/2˝ x 7˝ 8.2˝ x 5˝ 161/2˝ x 181/4˝ x 11˝ 10 lbs. $47.15
1-3549 Black PVC 6˝ x 5˝ 71/2˝ x 7˝ 8.2˝ x 5˝ 161/2˝ x 181/4˝ x 11˝ 10 lbs. $47.15
• Brand new, BLACK TALON pair Low Profile Seat 3 Piece Replacement
adjustable seat slides. Powder coat
painted, Sturdy steel construction. Easily Suspension Cushion Set ▲!
adapted to many seats. With Weight For International
Adjustment Harvester
▲!
ITEM 1-3753
$31.55 ITEM 1-3220
SPECIFICATIONS
• Positions 12 • Travel 711/16˝
ITEM 1-3812 $212.00 $153.55
• Brand new, SEAT SOLUTIONS Model
• Bolt pattern universal 115/8˝ max. depth. C/C • Brand new, implement seat suspen-
sion system with weight adjustments and 556000BW replacement cushion set for
• Studs 5/16-18 mount 11˝ C/C width depends on seat International Harvester mobile equipment.
• Studs 5/16-18 • Shpg. 4 lbs. seat slides for custom comfort. 2-spring
suspension with hydraulic damper. Fully Steel frame with heavy black and white
skirted, powder coated steel construction. vinyl cover on high density foam.
SPECIFICATIONS SPECIFICATIONS
• Suspension travel 11/2˝ Find a complete list online of equipment model numbers
ITEM 1-3550 • Weight adjustment 110 to 265 lbs. that this cushion fits at www.surpluscenter.com.
$31.00 • Top bolt pattern (width x length) 101/2˝ x slotted slides • Size 27˝ x 21˝ x 7˝ • Shpg. 24 lbs.
SPECIFICATIONS
• Bottom bolt pattern (width x length)
101/4˝ x 51/4˝, 61/2˝, 85/8˝, 95/8˝, 103/4˝, 12˝, 123/4˝ 3 Piece Replacement
• Positions 8 • Travel 55/8˝
• Bolt pattern universal 115/8˝ max. depth c/c
• Size 18˝ x 141/2˝ x 43/4˝ • Shpg. 35 lbs. Cushion Set ▲!
• Bolt hole 5/16˝ diam. • Shpg. 5 lbs.
Cushions For John Deere
Flip-Type Seat For John Deere ▲
!
Mounting
Hardware ITEM 1-3214
ITEM 1-3809 $134.45
▲! $26.85 • Brand new, SEAT SOLUTIONS Model
• Brand new, hardware for flip-type 55000YE replacement cushion set for
tractor seats. Use with flip-type seats of • Brand new, SEAT SOLUTIONS replace- John Deere mobile equipment. Steel frame
the following manufacturers: Bolens, Cub ment back cushion for John Deere mobile with heavy yellow vinyl cover on high
Cadet, Deutz/Allis Chalmers, Ford/New equipment. Steel frame with heavy brown density foam. Does not include hardware.
Holland, Hinomot, International Harvester, fabric cover on high density foam. For use SPECIFICATIONS
Iseki, John Deere, Kubota, Kamiai, Mahin- with mechanical or hydraulic suspension. Find a complete list online of equipment model numbers
dra, Massey Ferguson, Mitsubishi, Rhino, Adjustable lumbar support. that this cushion fits at www.surpluscenter.com.
Satoh, White & Yanmar. Shpg. 3 lbs. Find a complete list online of equipment model numbers • Size 251/2˝ x 19˝ x 151/4˝ • Shpg. 21 lbs.
Specific model numbers can be found at that these cushions fit at www.surpluscenter.com.
www.surpluscenter.com Back Cushion Yellow
Universal Seat ITEM 1-3217 $108.35 Mower
Slot Bar Set • Model 55700BR. Use with mechanical or Seat ▲!
hydraulic suspension. Adjustable lumbar
▲
!
support. Size 17˝ x 17˝ x 7˝. Shpg. 13 lbs.
Base Cushions ITEM 1-4198
ITEM 1-3553
$38.25 ITEM 1-3218 $103.30 $29.99
• New, riding mower seat. Yellow color.
• Brand new, BLACK TALON Model • Model 55800BR. Use with mechanical
suspension. Size 23˝ x 18˝ x 6˝. Shpg. 14 lbs. Molded vinyl cushion. Plastic base with
94500BK seat slot bar pair. Sturdy steel metal inserts for bolts.
construction. Converts many seat bolt
patterns to widths of 5˝ to 131/2˝. ITEM 1-3219 $101.95 SPECIFICATIONS
• Backrest height 9˝ • Size 18˝ x 18˝ x 12˝
SPECIFICATIONS • Size 15˝ x 215/16˝ • Model 55850BR. Use with hydraulic suspen- • Cushion depth 13˝ • Actual weight 6 lbs.
• Bolt hole 3/8˝ diam. • Shpg. 7 lbs. sion. Size 23˝ x 18˝ x 6˝. Shpg. 14 lbs. • Mounting holes 4˝ x 73/4˝ • Shpg. 28 lbs. (Oversize)
16 Seats California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov 8www.surpluscenter.com
Riding Ultra LED Multifunction ▲
!
Mower High SWAT Flashlights
Seat Back Seat
ITEM 1-4955 w/Arm
$29.95 Rests $14.65 each
• New, MICHIGAN SEAT COMPANY. • Brand new, LED multifunction
Molded in “White Outdoor” logo. Black ITEM 1-5504 Police SWAT style rechargeable flashlight.
vinyl over foam. Polymer frame.
SPECIFICATIONS $139.95 Features include adjustable beam from
spot to flood, flashing mode, waterproof
• Mounting four 3/8˝-16 metal inserts on 6˝ x 5˝ pattern • New BLACK TALON high back seat with aluminum body, knurled non-slip grip,
• Size 171/2˝ x 171/2˝ x 111/2˝ armrests. Heavy duty high density poly- rechargeable 3.7 volt battery, 115 volt AC
• Actual weight 6 lbs. • Shpg. 24 lbs. (oversize) urethane foam cushion on steel frame. plug-in and 12 volt DC car adapters for
Waterproof with drain hole in base. Flip charging and carrying case.
up arm rests. Fixed seat back. Adjustable
Black seat slides. SPECIFICATIONS
Mower SPECIFICATIONS • Bolt Pattern Various slotted • Bulb LUXEON 3 Watt LED bulb
• Light beam adj. spot to flood
• 105/8˝ wide x 1111/16˝ max
Seat • Model 120002BK
• Base Cushion 17˝ x 131/2˝ • Size 22˝ x 20˝ x 19˝
• Charger adapters 115 VAC and 12 VDC
• Battery 3.7 V 1800 mAh
• Back Height 16˝ • Actual Weight 24 • Battery life between charge 180 minutes
ITEM 1-3987 • Between Armrests 161/2˝ • Ships Oversize 60 lbs. • Battery recharge life up to 500 times
$44.95 Dixie Chopper
• Bulb life 100,000 hours
• Shpg. 2 lbs.
• New, MICHIGAN SEAT, black vinyl seat
with “Troy-Bilt” molded into back rest. Mower ITEM 1-4037-B Black Color
Plastic base with 4 threaded brass inserts
for mounting. Seat ITEM 1-4037-C Camouflage Color
SPECIFICATIONS
• Backrest height 12˝ • Size 20˝ x 171/2˝ x 15˝ ITEM 1-4100 Gray
• Cushion depth 15˝ • Actual weight 10 lbs.
• Mounting pattern 5˝ x 6˝ • Shpg. 35 lbs. (oversize) $119.95 Exmark
• New, riding mower seat. Light gray vinyl
cushion. Steel frame mounting studs and Seat
Deluxe High rails. Dixie Chopper logo on seat back.
Back Seat ▲! Lock lever for slide adjustment.
SPECIFICATIONS • New, MILSCO gray padded vinyl seat
• Backrest height 17˝ • Size 18˝ x 20˝ x 21˝ with plastic frame. ˝eXmark˝ logo in back
• Cushion depth 15˝ • Actual weight 19 lbs. cushion.
ITEM 1-5346 • Mtg. studs 11˝ x 111/4˝ • Shpg. 56 lbs. (oversize) ITEM 1-5171 $59.99
$208.00 Premium High SPECIFICATIONS
• Mounting Pattern 71/2˝ x 8˝ • Overall Size 181/2˝ x 201/2˝
• Brand new premium high back vinyl seat.
Constructed of heavy duty black vinyl with Back Seat • Thread size 5/16˝-18 x 15˝
• Actual Wt. 8 lbs.
• Seating Surface 17˝ x
high density foam cushion. Steel frame
with hard plastic vinyl lip. Fixed seat back.
w/Arm Rests 15˝ x 13˝ • Shpg. 43 lbs. (oversize)
Adjustable seat slides. Accepts operator ITEM 1-5246
Black
presence switch (not included). Ideal
replacement for commercial turf, utility $219.95
• New premium high back nylon seat with
Reclining
vehicles, forklifts, skid steers, loaders, back-
hoes and other construction equipment. armrests. Blue piping on back and base. Mower Seat
Ideal ZTR mower replacement. Construct-
SPECIFICATIONS • Base Cushion 18˝ x 18˝ ed of heavy duty nylon over foam cov- ITEM 1-5015-B
• Bolt Pattern 131/2˝ x 111/4˝ • Back Height 181/2˝
Slotted • Actual Weight 39
ered steel frame. Fold up adjustable arm
rests. Adjustable seat slide. Document $69.95
• Size 19˝ x 21˝ x 221/2˝ • Ships Oversize 47 lbs. pouch. Operator presence switch. Original • New, riding mower
application Dixon ZTR. reclining seat. Black vinyl cushion.
SPECIFICATIONS
• Bolt Pattern 11˝ to 111/4˝ rests 161/2˝ Black
• Base Cushion 18˝ x 14˝ • Overall Size 23˝ x 20˝ x Fixed Back
ITEM 1-5346-A w/Armrests • Backrest Height 18˝ from 211/2˝
base cushion • Actual Weight 35 Mower Seat
$221.25 • Distance between arm • Ships Oversize 100 lbs.
ITEM 1-5015-C
SPECIFICATIONS SAME AS ABOVE EXCEPT Craftsman $49.95
• Size 16˝ x 21˝ x 221/2˝ • Actual Weight 47 Lawn Mower SPECIFICATIONS • Mounting 123/4˝ x 113/8˝
• Between Armrests 181/2˝ • Ships Oversize 54 lbs.
Seat FOR BOTH
• Backrest Height 21˝
• Size 19˝ x 201/4˝ x 25˝
• Actual Wt. 15 lbs.
Adjustable Seat ITEM 1-5400 • Base Cushion 18˝ x 17˝ • Shpg. 62 lbs. (Oversize)
Slide Pair $29.95
• New, CRAFTSMAN riding mower seat. Black Mower
ITEM 1-5322 Molded plastic construction, 9˝ x 91/4˝ base Seat
$4.95
• New, takeoff, pair, adjustable seat
with 2 in-line threaded metal inserts for
mounting centered between 2 plastic rails
3/8˝ apart. Seat can be used as a replace- ITEM 1-5063-A
slides. Powder coat painted, Sturdy steel ment on Sears or Craftsman mowers.
construction.
SPECIFICATIONS • Seat Mount Two M8-1.25˝ SPECIFICATIONS
• Color Black/Gray
$49.95
• Positions 10 studs 121/2˝ centers, per ed metal inserts, front 1/2-13 • New, MILSCO black padded vinyl seat
• Seat Material Plastic rear 5/16-13 on 13/16 centers with plastic frame.
• Frame Mount 3/8˝ x 5/8˝ slot slide • Frame Plastic
on 111/2˝ centers, per slide• Shpg. 5 lbs • No Operator Presence SPECIFICATIONS
• Backrest Height 12˝ Switch Cavity or Switch
ITEM 1-5322-A w/tilt forward Pan $9.95 • Cushion Depth 141/2˝ • Drain Hole No
• Mounting Pattern 111/4˝
x 111/2˝
• Size 171/2˝ x 201/2˝ x 15˝
• Actual Wt. 12 lbs.
ITEM 1-5322-P tilt forward Pan $4.95 • Base Fixed
• Mounting Holes 2 thread
• Size 18˝ x 18˝ x 14˝
• Shpg. 10 lbs • Thread size 5/16˝-18 • Shpg. 43 lbs. (oversize)
California
Residents ▲ WARNING:Cancer and Reproductive Harm
! For more information refer to:www.P65Warnings.ca.gov Vehicle Camera Systems and Lights 17
800 Lumen 6 LED 12-24 VDC Vehicle Color Observation Systems
Flood Light • Brand new, color view kit for trucks, buses, RV’s, construction equipment. Improves
With RF safety where visibility is restricted. Audio function. Wireless handheld remote control.
Remote Multi-language screen display. Cameras and cables sold separately to fit your exact
Control ▲
! needs.
SPECIFICATIONS
ITEM 12-1000-RF • Screen 7˝ color LCD • Resolution 800 x 480 • Contrast 500:1 • Inter-connect cable 80˝
$45.00
• Brand new, CREATIVEWERKS Model
CWLED-006RF LED flood light. Integrated
Quad View System Extra Color Cameras
With Monitor • Brand new, extra color cameras for
RF receiver allows this light to control up
to 5 other non-RF LED lights (ITEM 12- & Control ITEMS 11-3316 and 11-3316-4. Four pin
1000 below). Terpolymer housing. Minimal wiring harness. Cable sold separately.
current draw. 33˝ wire lead. 110° of light
output. 6 button RF transmitter included. Rear
SPECIFICATIONS • Lens 51/8˝ x 31/8˝
• Voltage 12 VDC • Mount M10-1.5 x 11/8˝ stud Camera
• Amps 0.6 amps • Size 57/8˝ x 27/8˝ x 53/4˝
• Lumen rating 800 lumens • Shpg. 2 lbs.
800 Lumen
6 LED ITEM 11-3316-EC $115.00
Flood Light ▲
!
ITEM 11-3316-4 $242.25 • Adjustable bracket and rain/sun shade.
ITEM 12-1000 • Visor on screen to assist viewing in day- 18 LED’s around camera lens to provide
light. One, two, three or four images on night vision. Automatic camera heating
$36.00 screen. Changes to rear view when trans- below 14°.
• Brand new, CREATIVEWERKS Model mission shifted to reverse and also goes SPECIFICATIONS
CWLED-006 LED flood light. Terpolymer to appropriate side view based on turn • Operating voltage 12-24 DC
housing. Minimal current draw. 33˝ wire signals. Cameras and cables sold •• Night vision range 5 meters • Size 3˝ x 2˝ x 13/4˝
Camera viewing angle 120° • Shpg. 5 lbs.
lead. 110° of light output. Can be used separately to fit your exact needs.
with ITEM 12-1000-RF above.
SPECIFICATIONS • Lens 51/8˝ x 31/8˝
SPECIFICATIONS • Size 77/8˝ x 21/2˝ x 51/2˝ Bullet
• Screen format 16:9 • Shpg. 3 lbs.
• Voltage 12 VDC • Mount M10-1.5 x 11/8˝ stud Camera
• Amps 0.6 amps • Size 57/8˝ x 27/8˝ x 53/4˝
• Lumen rating 800 lumens • Shpg. 2 lbs.
Single View System
With
Pair of 6 LED Camera
Strobe ITEM 11-3316-BC $70.60
• Designed to be installed in 26mm hole
Light in bumper or other holes on vehicle body.
Heads 9 LED’s around camera lens to provide
night vision. Includes hole saw blade to
cut mounting hole.
SPECIFICATIONS • Size 11/4˝ dia. x 11/2˝
• Brand new, BUYERS dual hidden LED • Camera viewing angle 170° • Shpg. 1 lb.
mini strobe light heads. Intended to be
mounted inside of vehicles head and tail ITEM 11-3316 $254.85 Side Mount
lights. Six clear LED’s per strobe light • Adjustable bracket and rain/sun shade Camera
head. 15 ft. hard wired cable with weather on camera. 18 LED’s around camera
pack connectors to prevent corrosion at lens to provide night vision. Furnished
connection. Up to 4 pairs of these strobe with 1 camera, inputs for 2 additional
light heads can be synchronized for cameras (purchased separately). View from ITEM 11-3316-SMC
simultaneous or alternating flashes.
SPECIFICATIONS • Amps 1.8 amps/set
additional cameras can be set for normal
or mirrored image. Automatic camera
$128.20
• 6 LED per head • Mount 2 holes on 1.3˝ ctrs. heating below 14°. • Gasketed plastic housing for side mount
• 19 flash patterns • Size 11/2˝ dia. x 11/16˝ on vehicle. 9 LED’s around camera lens to
SPECIFICATIONS • Monitor size 7˝ x 1˝ x 5˝
• Voltage 12 VDC • Shpg. 1/4 lb. • Night vision range 5 meters • Camera size 3˝ x 2˝ x 13/4˝ provide night vision.
SPECIFICATIONS • Size 11/2˝ x 31/4˝ x 2˝
ITEM 12-1029-A Amber $140.80 • Camera viewing angle 120° • Cable length 65 ft.
• Screen format 16:9/4:3 • Shpg. 7 lbs. • Camera viewing angle 170° • Shpg. 1 lb.
ITEM 12-1029-C Clear $140.80 Camera Cables Spherical
17˝ Triple Lens Camera
• Brand new, connect
Marker Light Bar camera to monitor. 4 wires
for positive, negative, video ITEM 11-3316-SC
and audio. Weatherproof
threaded connectors. $147.45
ITEM 12-1015 $11.65 ITEM Length Shpg. Price • Two stud mount in two piece plastic
housing. Camera angle can be adjusted in
• New BUYERS Model 5621719 red 11-3316-16 16 ft. 1 lb. $9.65
marker light 3 lens with 3 LED’s per lens. housing. 9 LED’s around camera lens to
Wire leads. 11-3316-32 32 ft. 2 lbs. $16.50 provide night vision.
SPECIFICATIONS • Mount 4 bolt holes on 11-3316-65 65 ft. 3 lbs. $24.30 SPECIFICATIONS
• Marker light bar 33/4˝ to 121/4˝ to 16˝ ctrs. • Camera viewing angle 170° • Size 23/4˝ x 13/4˝ x 21/8˝
• 12 VDC • Size 17˝ x 11/2˝ x 13/4˝
11-3316-82 82 ft. 4 lbs. $32.40 • Mounting studs 5/8˝ c/c • Shpg. 1 lb.
• LED’s 9 red • Shpg. 3/4 lb.
18 Mobile Equipment Lights 8 www.surpluscenter.com
12-24 VDC LED Flood Lights
• Brand new, BUYERS LED flood lights. Shock, vibration resistant as well as waterproof.
Number of Lens Lens Overall
ITEM LED’s Lumens Amps Dimension Color Mount Housing Size Shpg. Price
12-975 54 375 0.3 5˝ diam. Clear 5/16˝ Stud Sealed Rubber 5˝ x 3.18˝ x 7˝ 2 lbs. $28.30
12-975-A 54 375 0.3 5˝ diam. Amber 5/16˝ Stud Sealed Rubber 5˝ x 3.18˝ x 7˝ 2 lbs. $29.80
12-980 6 1350 1.5 5˝ diam. Clear M8-1.25 Stud Sealed Aluminum 4.56˝ x 1.69˝ x 5.31˝ 3 lbs. $26.35
12-980-A 6 1350 1.5 41/4˝ diam. Amber M8-1.25 Stud Sealed Aluminum 4.56˝ x 1.69˝ x 5.31˝ 2 lbs. $36.55
12-980-M * 6 1350 1.5 41/4˝ diam. Clear Magnetic Sealed Aluminum 4.56˝ x 1.69˝ x 5.31˝ 2 lbs. $43.45
* With magnetic base mount. 30 ft. power cord with built in switch and automotive cigarette lighter plug end.
12-980-O 6 1350 1.5 41/4˝ x 13/4˝ Clear M8-1.25 Stud Sealed Aluminum 5.75˝ x 1.75˝ x 5˝ 2 lbs. $39.00
12-990 6 1350 1.5 51/4˝ x 35/16˝ Clear 3/8-16 Stud Sealed Aluminum 6˝ x 5˝ x 2˝ 3 lbs. $40.40
12-991 9 1700 2.25 5˝ diam. Clear 3/8-16 Stud Sealed Aluminum 5.5˝ x 6.62˝ x 2˝ 3 lbs. $35.85
12-992 9 1500 2.25 43/4˝ square Clear 3/8-16 Stud Sealed Aluminum 5.31˝ x 6.75˝ x 1.62˝ 3 lbs. $44.55
12-999-A 4 780 1 17/8˝ diam. Clear M8-1.25 Stud Sealed Aluminum 3.25˝ x 2.75˝ x 2.5˝ 1 lb. $28.45
12-999-B 16 4320 3 41/8˝ square Clear M10-1.5 Stud Sealed Aluminum 7.13˝ x 5˝ x 2.88˝ 3 lbs. $58.45
12-999-C 14 3780 3 41/2˝ diam. Clear M10-1.5 Stud Sealed Aluminum 7˝ x 4.63˝ x 2.75˝ 3 lbs. $53.85
12-24 VDC 5.2˝ 12 LED Low Profile 120 Lumen 12 VDC
Flood Lights Wide Angle Strobe LED Projector
15 LED’s, 900 Lumens Light Light
• Brand new, BUYERS
model 1492196 LED flood ITEM 12-987
light. Features Temperature
Control System, automatically adjusts light
for maximum power and lumens depend- ITEM 12-1066 $96.85 $23.95
• Brand new, BUYERS 5624433 LED
ing on temperature. Black powder coated • Brand new, BUYERS model 8890302 projector light. Three high intensity LED’s
aluminum housing. IP67, IP69K rated for twelve LED six clear and six amber with clear plastic lens. Mounted to an
extreme water and dust resistance. Clear strobe light. Aluminum housing, polycar- aluminum heat sink and mounting bracket.
polycarbonate lens. Stainless steel mount- bonate lens. Can be wired to strobe or
ing bracket and fasteners. 18˝ wire leads. Light housing can rotate 180°.
always ON. Can be wired to synchronize SPECIFICATIONS • Amps 0.28 amps
ITEM 12-1064
SPECIFICATIONS
$68.05
• Amps 6.8 amps
or alternate flash pattern with additional
lights. Surface mount with gasket. 9.5˝
• Lumens 120 Lumens
• Voltage 12 VDC
• Mount two bolt
on 11/2˝ centers
• Voltage 12-24 VDC • Size 5.9˝ x 4.8˝ x 1.45˝ wire leads. SAE J595 Class 1, CA13 • Connection • Size 41/4˝ x 13/8˝ x 11/2˝
• Power 82 Watts • Shpg. 2 lbs. Class B Rating. Rated IPX8 for extreme two 7˝ long wire leads • Shpg. 1 lbs.
Model 1492194. 36 LED’s, 7920 Lumens dust resistance and waterproofing.
12 VDC, 18 LED Mini
ITEM 12-1067
SPECIFICATIONS •
$82.45 SPECIFICATIONS • Clear & Amber Color
• # LED 12 • Mount 2 holes on 4.72˝
centers
Light
• 26 Flash Patterns
• Voltage 12-24 VDC
• Amps 4.9 amps
• Mount 10mm stud
• Size 6.3˝ x 5˝ x 3.63˝
• Voltage 12-24 VDC • Size 5.2˝ x 1.77˝ x 3.15˝ Bar
• Amps 0.88-1.76 amps • Shpg. 1/4 lb.
• 11˝ wire leads. • Shpg. 2 lbs.
12-1010-D 12-1010-B 12-1011-C 12-1011-B 12-1011-D 12-1012-B 12-1013-A 12-1014-B
• Brand new, BUYERS PRODUCTS 12 VDC LED lights. Rubber grommet around case.
Number Lens Lens Mount Lead Overall
ITEM of LED’s Dimensions Color Style Opening Lgth. Size Shpg. Price
12-1010-C 10 4˝ dia. Amber Turn-Park light 4˝ dia. 12˝ 59/16˝ dia. x 11/2˝ 3/4 lb. $12.65
12-1010-D 10 4˝ dia. Clear Backup light 4˝ dia. 12˝ 59/16˝ dia. x 11/2˝ 3/4 lb. $22.25
12-1010-A 10 4˝ dia. Red Stop-Turn-Tail light 4˝ dia. 12˝ 59/16˝ dia. x 11/2˝ 3/4 lb. $12.40
12-1010-B 18 4˝ dia. Red Stop-Turn-Tail light 4˝ dia. 12˝ 59/16˝ dia. x 11/2˝ 1 lb. $14.90
12-1011-C 10 61/2˝ oval Amber Turn-Park light 61/2˝ x 29/16˝ 12˝ 71/4˝ x 31/4˝ x 17/8˝ 3/4 lb. $12.65
12-1011-A 10 61/2˝ oval Red Stop-Turn-Tail light 61/2˝ x 29/16˝ 12˝ 71/4˝ x 31/4˝ x 17/8˝ 3/4 lb. $12.65
12-1011-B 20 61/2˝ oval Red Stop-Turn-Tail light 61/2˝ x 29/16˝ 12˝ 71/4˝ x 31/4˝ x 17/8˝ 1 lb. $16.90
12-1011-D 24 61/2˝ oval Clear Backup light 61/2˝ x 29/16˝ 12˝ 71/4˝ x 31/4˝ x 17/8˝ 3/4 lb. $25.15
12-1012-B 4 21/2˝ dia. Amber Marker light 21/2˝ dia. 6˝ 311/16˝ dia. x 15/8˝ 1/4 lb. $ 5.45
12-1012-A 4 21/2˝ dia. Red Marker light 21/2˝ dia. 6˝ 311/16˝ dia. x 15/8˝ 1/4 lb. $ 5.45
12-1013-B 3 21/2˝ x 11/2˝ Amber Marker light 6˝ 213/16˝ x 11/2˝ x 11/4˝ 1 lb. $ 4.70
12-1013-A 3 21/2˝ x 11/2˝ Red Marker light 6˝ 213/16˝ x 11/2˝ x 11/4˝ 1 lb. $ 4.70
12-1014-B 3 3/4˝ dia. Amber Marker light 3/4˝ dia. 7˝ 1/4 lb. $ 5.70
12-1014-A 3 3/4˝ dia. Red Marker light 3/4˝ dia. 7˝ 1/4 lb. $ 5.70
20 Lights 8 www.surpluscenter.com
12 VDC Surface Mount LED Strobe Lights 6 Clear LED Flood
Recessed
Mount Light
ITEM 12-1039
12-1028-A 12-1033-C 12-1035-A 12-1018-A
$43.75
• Brand new, BUYERS PRODUCTS model
1492138 recessed mount LED flood light. Die
cast powder coated aluminum housing. 18˝
long wire leads. IP67, RoHS certifications.
12-1032-B 12-1027 12-1031-A 12-1034-A SPECIFICATIONS • LED’s 6 Clear
• Recessed Mount Flood • Mounts 4 Holes on 4.09˝ x
• Brand new, BUYERS PRODUCTS 12 VDC surface mount strobe lights. Light 1.42˝ centers
* Meet SAE J595 Class 1 Certifications • 1620 Lumens • Mounting Depth 3.16˝
** Meet SAE J595 Class 2 Certifications • 12-24 VDC • Size 4.8˝ x 3.62˝ x 3.16˝
*** Meet IP67 Standards • Amps 1.38 amps @ 12 VDC • Shpg. 11/2 lb.
12-1025-A
mount LED strobe lights. Rubber grommet around
case. Meet SAE J595 class 2 certification.
12-1026-C
ITEM 12-1047-B $4.00
Amber Lens
Number # Flash Mount SPECIFICATIONS FOR BOTH
• Power 12 Volt DC 0.39 amps
ITEM of LED’s Color Patterns Opening Overall Size Shpg. Price • LED’s 4 clear
12-1025-A 24 Amber 6 4˝ dia. 59/16˝ dia. x 11/2˝ 3/4 lb. $29.80 • Size 2˝ dia. x 3/4˝
12-1025-C 24 Clear 6 4˝ dia. 59/16˝ dia. x 11/2˝ 3/4 lb. $37.50 • Shpg. 1/4 lb. A B
12-1026-A 24 Amber 6 61/2˝ x 29/16˝ 71/4˝ x 31/4˝ x 17/8˝ 3/4 lb. $29.80 Black Powder Coated
12-1026-C 24 Clear 6 61/2˝ x 29/16˝ 71/4˝ x 31/4˝ x 17/8˝ 3/4 lb. $37.50 Oval LED
12 VDC LED Light Strips Mounting
• Brand new, BUYERS LED light strip. Ideal for
compartments, cargo, work spaces of trucks, toolboxes Bracket
trailers and RV’s. Low profile. IP68 rated, completely
sealed water proof. Self adhesive back and brackets with
ITEM 12-1048 $3.70
• Brand new, BUYERS PRODUCTS part
screws included. 12 volt DC. Leads 41/2˝ long at each end. number LB1 mounting bracket kit for use
ITEM Lgth. # LED’s Amps Lumens Size Shpg. Price with oval LED lights. Powder coated steel.
Two holes on top surface along with a 3/8˝
12-995-18 18˝ 27 0.41 360 27˝ x 1/2˝ x 1/4˝ 1/4 lb. $16.45 x 21/4˝ long slot.
12-995-24 24˝ 36 0.54 470 33˝ x 1/2˝ x 1/4˝ 1/4 lb. $18.65 SPECIFICATIONS dia.,61/4˝ centers
12-995-36 36˝ 54 0.81 710 45˝ x 1/2˝ x 1/4˝ 1/2 lb. $24.40 • Opening 63/4˝ x 21/2˝ • Size 81/4˝ x 15/8˝ x 4˝
• Mounting holes Two 3/8˝ • Shpg. 1 lb.
12-995-48 48˝ 72 1.12 940 57˝ x 1/2˝ x 1/4˝ 1/2 lb. $32.65
& 800-488-3407 California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov Meters & Lights 21
LED 51/2˝ Off-road 440 Lumen 12
Porch/ Halogen Volt DC LED
Utility Light Driving Marine Docking
ITEM 11-3587-B
Light Kit Spotlight
$9.99 ITEM 12-1021 $29.99 ITEM 12-1044 $21.95
• New, PLATINUM BURNERS SERIES by • New, OPTRONICS model DLL50WB
• New, OPTRONICS model# RVPLL8CB OPTRONICS. Model MH600-D. Kit has LED spotlight. Wide flat beam. Aluminum
LED porch or utlity light with black cover. two 55 watt Halogen driving lights, illumi- housing with white epoxy finish. 12˝ wire
nated on/off switch with mounting bracket,
Acrylic lens. wiring harness with fuse. Corrosion proof leads with stainless steel hardware.
SPECIFICATIONS housing and chromed lens guards. SPECIFICATIONS • Lens 41/2˝ x 21/2˝
• Voltage 12 VDC • Mount Two 3/16˝ dia. holes SPECIFICATIONS • Bulb H3 • Voltage 12 VDC • Mount Single stud on
on 815/16˝ centers • Voltage 12 Volt DC • Size 51/2˝ dia. x 3˝ • LED’S 2 adjustable bracket
• Amps 0.16 amps @ 12
VDC • Size 93/4˝ x 31/2˝ x 21/8˝ • Wattage 55 per light • Shpg. 4 lbs. • Amps 0.6 amps • Size 5˝ x 31/2˝ x 3˝
• Lens 83/8˝ x 17/8˝ • Shpg. 1 lb. • Lumen Rating 440 lumens• Shpg. 2 lbs.
ITEM 11-3587-W White. Model RVPLL8C 800 Lumen 6 LED 16 LED
ITEM 11-3587-C Chrome. Model RVPLL8CC Flood Light Pair Driving
12 Volt ITEM 12-1046-RF
▲!
Light Kit
DC LED $29.95 ITEM 12-1043 $18.95
• Brand new, 2 CREATIVEWERKS model
Headlight CWLED-006 LED flood lights. Terpolymer • New, OPTRONICS model LS-216T. Kit
has two 16 LED driving lights, illuminated
housing. Minimal current draw. 110° of
ITEM 12-1037-A light output. on/off switch with mounting bracket,
$7.95 SPECIFICATIONS • Lens 51/8˝ x 31/8˝
• Voltage 12 VDC • Mount M10-1.5 x 11/8˝
wiring harness with fuse. Mount with self
adhesive strips and brackets.
• New, single LED headlight. Originally for • Amps 0.6 amps stud SPECIFICATIONS • Size 61/2˝ x 11/2˝ x 11/4˝
tractor style riding mower. Black powder • Lumen Rating 800 • Size 57/8˝ x 27/8˝ x 53/4˝ • LED Count 16 per light • Shpg. 1 lb.
coated aluminum housing. No mounting • Shpg. 4 lbs.
hardware.
lumens
2 LED Clear
SPECIFICATIONS
• Voltage 12 VDC • Mount: Two tabs, 1˝ gap,
3 Piece Remote Utility Light
• Current 0.35 amps
• Lens 21/4˝ dia
• Leads 6˝ with connector
half
Controlled 800 ITEM 12-1041 $8.95
• Mount: Two tabs, 1˝ gap, • Size 35/8˝ dia. x 21/2˝
• Shpg. 1 lb.
Lumen Flood • New, OPTRONICS model UCL-
13C2PG72B surface mount LED utility
1/4˝ holes
ITEM 12-1037 New Takeout
Light Kit marker, clearance light. Sealed lens with
ITEM 12-1037-D Light Cosmetic Damage ITEM 12-1050 $59.95 black backing.
SPECIFICATIONS
• New, 3 CREATIVEWERKS model • Type Surface Mount Utility • Mounts 2 Holes on 17/8˝
Utility CWLED-006RF LED flood lights. Each light
has integrated RF receiver. 6 button hand-
Light centers
• Leads 72˝ w/polarized
Light held RF controller that allows individual on/
• LED’s 2
• Voltage 12 VDC plug
off to each light. In addition up to 5 other • Amps 0.2 amps • Size 21/2˝ x 11/6˝ x 11/16˝
non-RF LED lights (our item number 12- • Shpg. 1/2 lb.
1000) can be connected to operate from • LED’s 3 Clear
ITEM 12-1002 each of the lights giving massive light out- 12 VDC LED Amber
$7.99 put. Terpolymer housing. Minimal current
draw. 33˝ wire lead. 110° of light output. Marker
• New, 12 Volt DC, 18 watt utility light. 32˝
SPECIFICATIONS • Lens 51/8˝ x 31/8˝
wiring harness with bullet connector for
positive and 5/16˝ ID ring terminal for ground-
• Voltage 12 VDC • Mount M10-1.5 x 11/8˝
stud
Light
• Amps 0.6 amps (each
ing. Adjustable angle swivel bracket with
$3.95
light) • Size 57/8˝ x 27/8˝ x 53/4˝
clamp for 1˝ dia. tubing. Sealed clear lens. • Lumen Rating 800 lumens • Shpg. 4 lbs ITEM 12-1001
SPECIFICATIONS • Lens 4˝ x 3˝ • New, TRUCKLITE amber marker light.
• Voltage 12 volt DC • Size 43/4˝ x 21/2˝ x 31/2˝ Submersible Two LED’s. 5 ft. wiring harness with
• Wattage 18 • Shpg. 2 lbs.
LED Trailer protective loom. Includes two high density
foam cushions for mounting. Note: this
4˝ Stud Mount, Lighting Kits assembly has an obsolete vehicle tracking
12 VDC Lights ITEM 11-3588 $39.99 system inside, this technology is no longer
in use and is not required to be connected
• New, BLAZER INTERNATIONAL LED in order for the light to function.
• New, PETERSON stop/tail/turn trailer lighting kits. Includes
MANUFACTURING. Grounds SPECIFICATIONS • Mount 2 hole 43/4˝ apart
two submersible lights, 20’ wiring harness, • Voltage 12 DC • Size 65/8˝ x 2˝ x 21/2˝
thru mounting stud. license plate bracket, mounting hardware. • Lens color amber • Shpg. 11/2 lbs.
SPECIFICATIONS • Mounting stud Ideal for boat, utility, camping, snowmobile,
• Voltage 12 DC
• Lens dia. 4˝
1/2˝ dia. x 19/16˝
• Size 41/8˝ dia. x 23/8˝
and motorcycle trailers. DOT compliant. 120 VAC Hour
SPECIFICATIONS
• Bulb type 2057 • Shpg. 1/2 lb. • Model# C7423 • Trailer width under 80' Meter
Stop/Turn/Tail Light • Voltage 12 VDC • Side Lens 27/8˝ x 21/8˝
ITEM 1-4028
ITEM 12-998-B $6.99 • Amps 0.1 amps @ 12
VDC (each light)
• Size 53/8˝ x 55/16˝ x 31/8˝
(each light) $18.95
• Model 410-2/V313-2. Use for stop, turn • Front Lens 49/16˝ x 49/16˝ • Shpg. 3 lbs. • New, HOBBS Model 20116 120 volt
and tail light on trailers. Single side red lens.
Stop/Tail Light ITEM 11-3590 $39.99 AC hourmeter. Non-resettable. Includes
ITEM 12-998-C $6.99 SPECIFICATIONS
• Model# C7280
• Trailer width over/under 80'
• Side Lens 27/8˝ x 2˝
adjustable rear clamp to hold into panel.
SPECIFICATIONS • Panel opening
• Model 313-2RA. Use for stop and tail • Amps 0.3 amps @ 12 • Size 8˝ x 3˝ x 213/16˝ (each • Digits 5 + 1/10 hour 17/16˝ x 15/16˝ hole,
light on trailers. Dual facing red/amber VDC (each light) light) • Voltage 120 VAC 21/2˝ deep
lenses. • Front Lens 8˝ x 37/8˝ • Shpg. 3 lbs. • Amps 0.03 max. • Shpg. 1/2 lb.
22 Lights California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov 8 www.surpluscenter.com
Magnetic Mount 7˝ Amber 12 Volt DC 5˝
Hazard Flasher LED Flashing Blue LED
ITEM 12-1020 School Bus Spot LIght
$29.99 Light Set ITEM 12-1077
• New, Peterson Mfg self con-
tained battery operated strobe ITEM 12-1023-AP $49.95
hazard flasher. Dual sided lens.
SPECIFICATIONS
ITEM 12-1023-RP Red $67.95 • New SUPERAY model 63F21 Blue LED
spot light. Nine high-powered LED's.
• New round amber school bus light set. Black powder coated waterproof alumi-
• Batteries 4 AA • Mount Magnetic base Both lights can flash together or alternate
(not included)
num housing (IP67). Clear polycarbonate
• Lens 4˝ dia. between lights. Rubber grommet. 8˝ leads.
• Lens Color Amber
lens. Stainless steel mounting bracket and
• Size 41/4˝ x 3˝ x 8˝ Aluminum heatsink.
• Flash Rate 50/minute
fasteners. Deutsch DT connector with 21˝
• Shpg. 2 lbs.
SPECIFICATIONS • Surface Mount 4 holes on wire leads.
• Flash Rate 100/min. 61/4˝ dia. B.C. SPECIFICATIONS
800 Lumen • Volts 12 DC • Size 7˝ dia. x 33/8˝ x 21/4˝ • Voltage 12 Volt DC • Light Pattern 12° Spot
LED Flood • Amps 1.66
• LED’s 8
each
• Shpg. 3 lbs.
• Amps 2.7 12 Volt/1.35
24 Volt
• Lens 3.5˝ x 3.5˝
• Mount M10-1.5 x 1˝ stud
Light Pair ▲! • Power Rating 45 watts • Size 4.96˝ x 3.74˝ x 4.96˝
ITEM 12-1046 $29.95 12 VDC • LED's 9 • Shpg. 4 lbs.
• New, 2 CREATIVEWERKS model
CWLED-006 LED flood lights. Terpolymer Two Bulb Truck Utility
housing. Minimal current draw. 12˝ wire Turtleback Tail Light
lead with Weatherpack connector. 110° of
light output. Amber Marker Light Set
SPECIFICATIONS
• Voltage 12 VDC • Mount M10-1.5 x 11/8˝
ITEM 12-1061-A $4.95
• Amps 0.6 amps stud ITEM 12-1061-R Red
• Lumen Rating 800 lumens • Size 57/8˝ x 27/8˝ x 53/4˝
• Lens 51/8˝ x 31/8˝ • Shpg. 4 lbs.
• New,GROTE model 91043 amber marker
light. Two C1893 bulbs. ITEM 12-1006 $19.95
• This left and right tail light set was re-
SPECIFICATIONS • Mount 2 holes 43/4˝ apart
moved from vehicles prior to sale. Includes
12 Volt DC • Voltage 12 DC • Size 5.84˝ x 2˝ x 1˝
mounting brackets and license plate
• Lens Color Amber • Shpg. 1/4 lb.
Amber LED mount. Ford. Part numbers 5C3B13404AB
Clearance/ 12˝ Amber Ultra Thin 12 and 5C3B13405AB.
SPECIFICATIONS
Marker Light Pair Volt DC Light Bar • Bulbs Two #3157 per side • Size 53/4˝ x 3˝ x 63/4˝
• Shpg. 8 lbs.
$8.95
• Connector round 4 pin
ITEM 12-1052-A
ITEM 12-1052-R Red ITEM 12-1057-A $11.95 12 Volt DC Red Thin Line
• New BLAZER INTERNATIONAL model ITEM 12-1057-R Red LED Marker/ Clearance
B534A2 amber marker light. Mounts with
either rubber grommet or chrome trim • New, GRAND GENERAL model# 76310 Light
ring. 6˝ leads. DOT, SAE FMVSS108, and LED light bar. Water and vibration resistant.
Canadian CMVSS compliant. SPECIFICATIONS • Mounting 2 holes 117/16˝ c/c
SPECIFICATIONS • Voltage 12 VDC • Size 12˝ x 5/8˝ x 1/4˝
• 3/4˝ Marker Light Pair • Mounts in 3/4˝ dia. x 5/8˝
deep
• LED’s 15 • Shpg. 1/4 lb.
ITEM 12-1059 $5.95
• Voltage 12 VDC
• LED’s 1 amber • Shpg. 1/4 lb. 600 Lumen • New, GRAND GENERAL LED light.
Water and vibration resistant. U.S. DOT,
12 VDC Amber and US FMVSS108 rated. Bullet connec-
12 Volt DC LED Light tor plugs on leads. Special angled LED’s
give wide angle output.
6 LED $24.95
ITEM 12-1055-A SPECIFICATIONS • Mounting 2 holes 3˝ c/c
Light Kit
ITEM 12-1055-C Clear $29.95
• Voltage 12 VDC • Size 4˝ x 9/16˝ x 11/8˝
ITEM 1-5108 $4.99 $5.99 SUV. Could also be used for animated dis-
plays requiring similar movement. Integral
• New, OPTRONICS model# 29002459LB
• Brand new, ratchet strap with J hooks at recess mount LED light. White metal hous- park position switching.
each end. Use to tie down loads on trailers, ing, faceted reflector and frosted glass SPECIFICATIONS bracket & threaded on
pickup boxes. Plated steel parts. Not for • Speed 40 cycles/min. shaft housing.
lens. Sold with three mounting screws. • Shaft 0.315 dia. x 11/16˝
overhead lifting. Bright yellow nylon strap. • Voltage 12 DC
SPECIFICATIONS • Amperage 1.2 Amps overall length. Tapered
SPECIFICATIONS • Voltage 12 VDC • Mount Three 1/8˝ dia. holes serrated section and male
• Rotation Approximately thread to attach wiper
• Working Capacity 3000 lbs. • Total length 15 ft. • Amps 0.2 amps • Size 31/8˝ dia. x 11/2˝ 180 degree arc. arm (not included).
• Lashing Capacity 1000 lbs. • Hook Style J • Lens 31/8˝ dia. • Shpg. 1 lb. • Duty Continuous • Size 61/2˝ x 51/2˝ x 4˝
• Strap width 11/2˝ • Shpg. 3 lbs. • Mount 2 angled tabs on
Clearance/ • Shpg. 4 lbs.
SAE
Item Number Prince model Ports Product Details & Application Price
Inlet Sections
9-SVI24 SVI24 10 Open Center Systems, Adjustable Relief (500-1500 PSI) preset @ 1000 PSI $63.10
9-SVI15 SVI15 8 Open Center Systems, Adjustable Relief (1500-3000 PSI) preset @ 2000 PSI $63.10
9-SVI25 SVI25 10 Open Center Systems,Adjustable Relief (1500-3000 PSI) preset @ 2000 PSI $63.10
9-SVI21 SVI21 10 Closed Center Systems $47.10 9-SVI15
Work Sections manual operated
9-SVW1AA1 SVW1AA1 8 Single Acting Cylinder Spool, spring centered $89.30
9-SVW1BA1 SVW1BA1 8 Double Acting Cylinder Spool, spring centered $88.25
9-SVW1BA7 SVW1BA7 8 Double Acting Cylinder Spool, spring centered, verical handle $91.35
9-SVW1BA9 SVW1BA9 8 Double Acting Cylinder Spool, spring centered, no handle, use with joysticks $80.05
9-SVW1BB1 SVW1BB1 8 Double Acting Cylinder Spool, 3 position detent $103.75
9-SVW1CA1 SVW1CA1 8 Motor spool, spring centered $92.20
9-SVW1CB1 SVW1CB1 8 Motor spool, 3 position detent $107.75
9-SVW1DD1 SVW1DD1 8 Double Acting Cylinder Spool w/detented float position $116.10
9-SVL1CA1 SVL1CA1 8 Double Acting Cylinder Spool w/Locks, spring centered $171.30
9-SVS1GA1AA SVS1GA1AA 8 Series Spool, Double Acting Cylinder, spring centered $146.60
9-SVS1HA1AA SVS1HA1AA 8 Series Spool, Motor Spool, spring centered $146.60
9-SVS1HB1AA SVS1HB1AA 8 Series Spool, Motor Spool, 3 position detent $162.15
9-SVW1BA1
9-SVM1ES1 SVM1ES1 8 Double Acting Cylinder Spool w/Metering, spring centered $106.40
9-SVR1ES3BB SVR1ES3BB 8 Double Acting Cylinder Spool w/Metering and Work Port Reliefs, spring centered $95.00
Work Sections 12 Volt DC solenoid operated
9-SVW1AA-T12Q SVW1AA-T12Q 8 Single Acting Cylinder Spool (solenoids each end) $376.80
9-SVW1BA-T12Q SVW1BA-T12Q 8 Double Acting Cylinder Spool (solenoids each end) $375.70
9-SVW1CA-T12Q SVW1CA-T12Q 8 Motor Spool with (solenoids each end) $379.70
9-SVL1CA-T12Q SVL1CA-T12Q 8 Double Acting Cylinder Spool with Locks and (solenoids each end) $458.80
9-SVW1AA1-S12Q SVW1AA1-S12Q 8 Single Acting Cylinder Spool with solenoid and manual lever $407.50
9-SVW1BA1-S12Q SVW1BA1-S12Q 8 Double Acting Cylinder Spool with solenoid and manual lever $407.50
9-SVW1CA1-S12Q SVW1CA1-S12Q 8 Motor Spool with solenoid and manual lever 9-SVW1BA-T12Q $411.50
Outlet Sections
9-SVE11 SVE11 8 Open Center Systems $43.30
9-SVE21 SVE21 10 Open Center Systems $43.30
9-SVE11
9-SVE22 SVE22 10 Open Center Systems w/Power Beyond Port $51.45
9-SVE23 SVE23 10 Closed Center Systems with either manual or Solenoid Operated Work Sections $49.70
9-SVE26 SVE26 10 Open Center Systems with Solenoid Operated Work Sections $73.05
9-SVE27 SVE27 10 Open Center Systems with Solenoid Operated Work Sections and Power Beyond $76.70
Bolt Kits
9-660401001 660401001 1 Work Section Bolt Kit $11.40
9-660401002 660401002 2 Work Section Bolt Kit $11.85
9-660401003 660401003 3 Work Section Bolt Kit $12.40
9-660401004 660401004 4 Work Section Bolt Kit $13.00
9-660401004
9-660401005 660401005 5 Work Section Bolt Kit $13.35
9-660401006 660401006 6 Work Section Bolt Kit $15.00
• On the next page many optional accessories
9-660401007 660401007 including direct mount joystick lever kits, air shift
7 Work Section Bolt Kit $15.70
9-660401008 660401008 kits, spacer blocks (often used with joysticks to
8 Work Section Bolt Kit $16.65
9-660401009 660401009 allow better handle movement) and cable operated
9 Work Section Bolt Kit $17.05
9-660401010 660401010 levers and joysticks are shown.
10 Work Section Bolt Kit $19.35
& 800-488-3407 Prince Sectional Control Valves 27
Quick Order SV Valve Combinations
• The following are some of our most popular configurations of the Prince SV valves. They have special item numbers to
provide easy ordering. Standard levers on each spool. Furnished unassembled. Includes all necessary bolt kits and seals.
Loader
Configuration Backhoe
Configuration
ITEM 9-7554 w/manual
$294.75 outriggers
• Open Center, both spools are double
acting with spring centering. ITEM 9-7557
Loader Configuration w/float
$472.40
ITEM 9-7555 $322.60 • Open Center, all four spools are double
acting with spring centering.
• Open Center, First spool double acting
with detented float position and double
acting second spool.
Backhoe
Loader Configuration Backhoe Configuration
Configuration w/hydraulic w/Joystick Controls
w/Grapple outriggers ITEM 9-7502 $848.50
ITEM 9-7556 ITEM 9-7558 • Open Center, all six spools are double
$383.55 $650.90
acting with spring centering. Two joystick
levers for ease of control. Outrigger sec-
• Open center, all three spools are double • Open Center, all six spools are double tions are in the middle and have individual
acting with spring centering. acting with spring centering. levers.
4 lbs. $56.35
tions. Right/left controls
one work section, forward/ ITEM 9-6705-79 79˝ lgth.
backward controls the sec- ITEM 9-6705-98 98˝ lgth. 4 lbs. $61.50
ond section. Spools can be Offset Straight
operated independently or simultaneously.
If two joysticks are installed on one stack ITEM 9-6704 Single lever 4 lbs. $53.55
valve, it is recommended that there be two • Operated in one axis and requires one
standard work sections between them to control cable and one connection kit.
prevent handle interference. Shpg. 5 lbs.
ITEM 9-6704-J Joystick lever 6 lbs. $141.10
SV Valves 20 Valves
• Operated in dual axis and requires two
Offset 9-1905 9-7514 * control cables and two connection kits. Valve Connection Kits 1/2 lb. each
Handle $115.20 $222.15
ITEM 9-6704-JS 6 lbs. $248.55 ITEM 9-6706-RD RD5000 Valve $39.90
Straight 9-1904 9-7513 *
Handle $115.20 $222.15
• Same as ITEM 9-6704-J except with
SPST momentary pushbutton switch in
ITEM 9-6706-SV SV Valve $36.70
* Includes rubber boot handle. ITEM 9-6706-20 20 Valve $34.00
28 Prince Hydraulic Stack Valves 8 www.surpluscenter.com
20 Series Sectional Control Valves
• Brand new Prince 20 Series hydraulic sectional control valves. Select the exact components needed for your application from the
chart below. All components sold individually to order complete valves, add to existing assemblies or replacement parts. Work sections
are furnished with handles, bolt kits include necessary o-rings to seal between sections.
• Load Sense valves are used with pressure-flow compensated pumps with load sensing. Load sense port is in outlet section. Load
sense work sections can only be used with load sense Inlet/Outlet sections.
• One to ten section valves can be ordered. All In and Out sections have both top and end ports.
To order purchase 1 inlet section, work sections to meet your needs, a bolt kit for the corresponding number of work sections and 1
outlet section. All components furnished separately for easy assembly.
• See page 27 for optional accessories including direct mount joystick lever kits, air shift kits and cable operated levers and joysticks
• To order: purchase 1 inlet section, work sections to meet your needs, SPECIFICATIONS • All Ports are SAE o-ring boss.
• Flow rate 20 GPM (nominal) to 25 GPM • Cast iron construction with chrome
a bolt kit for the corresponding number of work sections and 1 outlet maximum plated spools.
section. All components furnished separately for easy assembly. • Pressure 3500 PSI maximum • Load checks with each work section.
SAE
Item Number Prince model Ports Product Details & Application Price
Inlet Sections
9-2012G 2012G 12 Open Center Systems, Adjustable Relief (1350-1750 PSI) preset @ 1750 PSI $131.65
9-2012H 2012H 12 Open Center Systems, Adjustable Relief (1750-2200 PSI) preset @ 2200 PSI $131.65
9-2012J 2012J 12 Open Center Systems,Adjustable Relief (2200-3000 PSI) preset @ 2500 PSI $131.65
9-2012A 2012A 12 Closed Center Systems and Load Sense, No Relief Valve 9-2012J $93.00
Work Sections Manual Operated
9-20P1AA1AA 20P1AA1AA 10 Single Acting Cylinder Spool, spring centered $168.35
9-20P1BA1AA 20P1BA1AA 10 Double Acting Cylinder Spool, spring centered $160.75
9-20P1BB1AA 20P1BB1AA 10 Double Acting Cylinder Spool, 3 position detent $166.75
9-20P1CA1AA 20P1CA1AA 10 Motor Spool, spring centered $168.35
9-20P1CB1AA 20P1CB1AA 10 Motor Spool, 3 position detent $174.35
9-20P1DD1AA 20P1DD1AA 10 Double Acting Cylinder Spool w/detented float position $210.15
9-20P1BA1AA
9-20L1CA1 20L1CA1 10 Double Acting Cylinder Spool w/Locks, spring centered $230.95
Work Sections Load Sense Lever Operated
9-20LP1HA1AA 20LP1HA1AA 10 Single Acting Cylinder Spool, spring centered $192.85
9-20LP1JA1AA 20LP1JA1AA 10 Double Acting Cylinder Spool, spring centered $185.50
9-20LP1JB1AA 20LP1JB1AA 10 Double Acting Cylinder Spool, 3 position detent $191.50
9-20LP1KA1AA 20LP1KA1AA 10 Motor Spool, spring centered $192.85
9-20LP1KB1AA 20LP1KB1AA 10 Motor Spool, 3 position detent $198.85
9-20LP1JA1AA
9-20LP1MD1AA 20LP1MD1AA 10 Double Acting Cylinder Spool w/detented float position $222.50
Outlet Sections
9-20E21 20E21 12 Open Center Systems $62.10
9-20E22 20E22 12 Open Center Systems with SAE 10 Power Beyond Port $71.95
9-20E23 20E23 12 Closed Center Systems $68.85
9-20LE21 20LE21 12 Load Sense Systems SAE 4 load sense port 9-2OE21 $102.00
Bolt Kits
9-660402001 660402001 1 Work Section Bolt Kit $14.25
9-660402002 660402002 2 Work Section Bolt Kit $16.00
9-660402003 660402003 3 Work Section Bolt Kit $16.90
9-660402004 660402004 4 Work Section Bolt Kit $18.55
9-660402005 660402005 5 Work Section Bolt Kit $22.80
9-660402006 660402006 6 Work Section Bolt Kit $24.40
9-660402007 660402007 7 Work Section Bolt Kit $26.70
9-660402008 660402008 8 Work Section Bolt Kit $30.60
9-660402009 660402009 9 Work Section Bolt Kit $33.70 9-660402004
9-660402010 660402010 10 Work Section Bolt Kit $40.75
& 800-488-3407 Prince Hydraulic Directional Control Valves 29
8 GPM Wolverine by Prince MB Series
Compact Double Acting Directional Control Valves
• Brand new WOLVERINE by PRINCE MB Series directional control valve
for operating double acting cylinders. Ideal for small tractor and other
low flow applications requiring a compact control valve. Features include
monoblock construction, load check, built-in adjustable pressure relief valve,
spring centering spool action, open center with enclosed plug to convert to
power beyond or closed center, side or top inlet/outlet ports and vertical or
horizontal handle mounting.
SPECIFICATIONS
• Flow 8 GPM max. • Open center convertible to power beyond or closed ctr.
• Pressure 3500 PSI max. • In/Out ports SAE 8
• Relief valve 2000 PSI, adj. 2000-3500 PSI • Work ports SAE 8
• Reqd. filtration ISO 4406 19/17/14 • Mount 3 hole base
Motoring Spool Valves can be found on page 29
# Spools ITEM Style Size Shpg. Price
One 9-7861 DA spring centered 75/8˝ x 4˝ x 21/4˝ 9 lbs. $101.75
One 9-7861-F DA spring centered w/float 91/8˝ x 4˝ x 21/4˝ 9 lbs. $212.10
Two 9-7862 DA spring centered 75/8˝ x 57/16˝ x 21/4˝ 12 lbs. $161.15
Two 9-7862-F * DA spring centered w/float 91/8˝ x 57/16˝ x 21/4˝ 12 lbs. $226.00
Three 9-7863 DA spring centered 75/8˝ x 613/16˝ x 21/4˝ 15 lbs. $254.40
Four 9-7864 DA spring centered 75/8˝ x 87/16˝ x 21/4˝ 18 lbs. $293.35
Five 9-7865 DA spring centered 75/8˝ x 913/16˝ x 21/4˝ 21 lbs. $359.20 Joystick Handle Kit
Six 9-7866 DA spring centered 75/8˝ x 117/16˝ x 21/4˝ 24 lbs. $425.25 ITEM 9-7867-J $138.15
* First spool detented float • Brand new, straight joystick handle for
use with Wolverine MB Series valves.
MB Series Accessories Allows one lever to control two different
adjacent work sections. Spools can be
Power Beyond/Closed Center 3 Position Detent Kit operated independently or simultaneously.
Conversion Plug ITEM 9-7867-D $34.05 If two joysticks are installed on one stack
ITEM 9-7867-B $2.80 • Detent kit for Wolverine MB Series valve.
Converts spring centering spools to 3
valve, it is recommended that there be two
standard work sections between them to
• For use with Wolverine MB Series valves. prevent handle interference.
Power beyond plug is necessary to convert position manual detent. Shpg. 1/2 lb.
SPECIFICATIONS
valves to closed center. Shpg. 1/10 lb. • Straight handle joystick control • Shpg. 2 lbs.
ITEM 9-6700
ITEM 9-7493 ITEM 9-6763 $112.80
$150.35 $277.20 Double Acting – IN/OUT 1/2˝ NPT
• Brand new, BRAND HYDRAULICS
• Brand new PRINCE RD5000 Series.
Hydraulic control valve for operating single
Model DC16T3LBS high flow directional ITEM 9-6764 $103.20
control valve. Cast iron body with Buna-N • Not convertible to closed center.
acting cylinders. Monoblock gray cast iron O-rings. High lift, ball spring relief valve.
body. Hard chrome plated spools. Open Handle included. Double Acting
center. Load checks.
SPECIFICATIONS
SPECIFICATIONS
• Open center • Reqd. filtration 20 micron
ITEM 9-6765 $103.20
• One spool valve • Adj. relief 1500-3000 PSI • One single acting cyl. spool • In/Out ports SAE 16
• Max. 25 GPM factory set at 2000 PSI spring to center 3 position • Work port SAE 16 Detent Kit
• Max. 3000 PSI
• IN/OUT 3/4˝ NPT
• Spring centering
• Size 91/2˝ x 5˝ x 31/4˝
• Flow 45 GPM max. • Mount 4 bolts on
• Pressure 3000 PSI max. 43/4˝ x 33/8˝ ctrs. ITEM 9-8028-D $24.25
• Work port 1/2˝ NPT • Shpg. 16 lbs. • Relief valve adj. • Size 105/16˝ x 51/32˝ x 41/4˝ • 3 position manual detent kit. Shpg. 1 lb.
set at 1500 PSI • Shpg. 18 lbs.
California
Residents ▲ WARNING:Cancer and Reproductive Harm
! For more information refer to:www.P65Warnings.ca.gov Motor Spool Valves 31
High Flow Motor Prince Motor Spool Valves
Control • Brand new PRINCE RD5000 Series
Valves ▲! monoblock motor spool control valves.
w/ Flow Control Work ports connected to tank in neutral
so motor can free wheel. No load checks.
Cast iron valve body, chrome plate spools.
Parallel spool circuit allows any combination of spools
$431.10 each
to work simultaneously. Closed center conversion plug, power
beyond sleeve and three position detent kit sold on page 29.
• Brand new, BRAND HYDRAULICS
directional control valve with flow control. SPECIFICATIONS
Combines a 4-way directional control valve • Max. 25 GPM • IN/OUT 3/4˝ NPT, work 1/2˝ NPT • Adjustable relief valve 1500-3000 PSI
with a full range, pressure compensated, • Max. 3000 PSI • Spring centering factory set at 2000 PSI
by-pass type flow control valve and a pilot ITEM Spools Size Shpg. Price
operated relief valve. Extremely fine flow
metering to the work ports in direct proportion 9-6759 One 91/2˝ x 5˝ x 31/4˝ 16 lbs. $150.35
to the handle movement. Cast iron body with 9-6760 Two 91/2˝ x 71/2˝ x 31/4˝ 25 lbs. $242.40
Buna-N O-rings. Handle included. 9-6761 Three 91/2˝ x 91/2˝ x 31/4˝ 36 lbs. $345.35
SPECIFICATIONS
• Open center • Reqd. filtration 20 micron 14 GPM Rotary Control
• One double acting, • In/Out ports SAE 16
metered flow motor spool, • Work ports SAE 16 Motor Valve
friction detent • Mount 4 bolts
• Pressure 3000 PSI max. on 43/4˝ x 33/8˝ ctrs. Control
• Relief valve adj.
set at 1500 PSI
• Size 91/16˝ x 51/32˝ x 41/4˝
• Shpg. 18 lbs. Valve
ITEM Model GPM ITEM 9-7872
9-7497-45 DCF16M454LF1 45 max. ITEM 9-7975 $178.70
9-7497-30 DCF16M304LF1 30 max. $174.65 • Brand new, PRINCE RD512JD5A4B3
• Brand new, WOLVERINE by PRINCE directional control valve with rotary spool.
Flow/Directional WVS Series monoblock directional control Single spool, double acting. Turning spool
90° CW goes to full spool in and 90° CCW
Control valves. Features cast iron construction,
load check, built-in adjustable pressure to full spool out. Detent in center position.
! Valve
▲ relief, open center, side or top outlet port Use for controlling hydraulic motors. No
and vertical or horizontal handle mounting. handle.
ITEM 9-5174 Spool details: spool 1 DA motor spool, 3 SPECIFICATIONS
$244.75 position detent.
• Can be converted to closed center or
• Open center
• Flow 30 GPM max.
• In/Out ports 3/4˝ NPT
• Work ports 1/2˝ NPT
• Brand new BRAND HYDRAULICS. • Pressure 3000 PSI max. • Mount 3 holes thru body
Combines a directional control valve with power beyond with the addition of a power
beyond sleeve our ITEM 9-7998-PB (sold • Relief adj. to 1500-3000, • Size 91/2˝ x 5˝ x 31/4˝
pressure compensated flow control in one preset at 2000 PSI • Shpg. 16 lbs.
body. Use to control speed and direction separately on page 28).
on cylinders, motors. Work ports blocked SPECIFICATIONS
in neutral. Frictional detent on handle to • Model WVS11C5C1 • Reqd. filtration Rotary Spool
• Open center ISO 4406 19/ 17/ 14
maintain constant speed. Open center. • Spools one • In/Out ports SAE 8 Control Valve
SPECIFICATIONS • IN/OUT 3/4˝ NPT
• 18 GPM max. • Work ports 1/2˝ NPT
• Flow 14 GPM max.
• Pressure 4000 PSI max.
• Work ports SAE 8
• Mount 3 hole base Handle
• 3000 PSI max. • Size 73/8˝ x 33/8˝ x 31/4˝ • Relief valve 2500 PSI, • Size 89/16˝ x 313/16˝ x 23/4˝
• Adj. relief valve • Shpg. 7 lbs. adj. 2200-3200 PSI • Shpg. 9 lbs. ITEM 9-7872-H
Single Spool 18 GPM Compact $33.10
• Brand new, PRINCE Model 660150084
Control 8 GPM Motor handle kit for PRINCE rotary spool control
valve. Shpg. 1 lb.
Valve ▲! Control
Valve One Spool Prince
Motor
ITEM 9-7458 ITEM 9-7860 Control
$244.75 $128.05 Valves
• Brand new, BRAND HYDRAULICS Model • Brand new WOLVERINE by PRINCE
SDCF755M184LF1 directional control MB Series directional control valve for
valve with flow control. Combines a 4-way operating rever sible hydraulic motors.
Ideal for small tractor and other low flow • Brand new PRINCE RD2500 Series.
directional control valve with a full range, Monoblock high tensile strength gray cast
pressure-compensated, by-pass type flow applications requiring a compact
control valve. Features include monoblock iron body. Hard chrome plated spools.
control valve, and an adjustable pilot-oper- Open center with conversion plug for
ated relief valve. Extremely fine flow meter- construction, built-in adjustable pressure
relief valve, three position detent spool closed center applications. Load checks.
ing to the work ports in direct proportion to
the handle movement. Cast iron body with action, open center with enclosed plug to SPECIFICATIONS
Buna-N O-rings. Handle included. convert to power beyond or closed center, • One spool valve • Adj. relief 1500-3000 PSI
side or top inlet/outlet ports and vertical or • Max. 20 GPM factory set at 1500 PSI
SPECIFICATIONS • Max. 3000 PSI • Spring centering
• Open center • Reqd. filtration 30 micron horizontal handle mounting.
• IN/OUT 3/4˝ NPT • Size 9 ˝ x 41/4˝ x 3 ˝
• Spool 1 double acting, • In/Out ports 3/4˝ NPT SPECIFICATIONS • Flow 8 GPM max. • Work ports 1/2˝ NPT • Shpg. 12 lbs.
metered flow motor spool, • Work ports 1/2˝ NPT • Open center convertible to • Reqd. filtration
friction detent • Mount 3 bolts on power beyond or closed ctr. ISO 4406 19/17/14 ITEM Spool Action Price
• Flow 18 GPM max. 25/16˝ x 311/16˝ x 315/16˝ ctrs. • Pressure 3500 PSI max. • In/Out ports SAE 8
• Pressure 3000 PSI max. • Size 83/8˝ x 41/4˝ x 33/16˝ • Relief valve 2000 PSI, • Work ports SAE 8 9-6766 Spring Centered $107.60
• Relief valve adj. set 1500 PSI • Shpg. 8 lbs. adj. 2000-3500 PSI • Mount 3 hole base 9-6767 3 Position Detent $114.00
• Size 75/8˝ x 4˝ x 21/4˝ • Shpg. 9 lbs.
32 Joystick & Directional Valves California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov
ITEM Model Ports PSI GPM Shpg. Price ITEM Model Ports PSI GPM Shpg. Price
9-7960-4 WFC-400 1/4˝ NPT 5000 0-5 1 lb. $ 25.40 9-7961-4 WNV-400 1/4˝ NPT 5000 0-5 1 lb. $ 21.55
9-7960-6 WFC-600 3/8˝ NPT 5000 0-8 2 lbs. $ 27.25 9-7961-6 WNV-600 3/8˝ NPT 5000 0-8 2 lbs. $ 28.95
9-7960-8 WFC-800 1/2˝ NPT 5000 0-15 3 lbs. $ 33.85 9-7961-8 WNV-800 1/2˝ NPT 5000 0-15 3 lbs. $ 36.45
9-7960-12 WFC-1200 3/4˝ NPT 3000 0-25 4 lbs. $ 65.70 9-7961-12 WNV-1200 3/4˝ NPT 3000 0-25 4 lbs. $ 65.40
9-7960-16 WFC-1600 1˝ NPT 3000 0-40 7 lbs. $159.70 9-7961-16 WNV-1600 1˝ NPT 3000 0-40 7 lbs. $158.75
1/4˝ - 1˝ 11/4˝ - 2˝
and and
SAE 4 - 16 SAE 20 - 32
ITEM PSI Ports Shpg. Price ITEM PSI Ports Shpg. Price
9-8595-4 5880 1/4˝ NPT 11/2 lbs. $ 29.20 9-7281-4 7250 1/4˝ NPT 11/2 lbs. $19.80
9-8595-6 5880 3/8˝ NPT 2 lbs. $ 36.50 9-7281-6 7250 3/8˝ NPT 2 lbs. $21.05
NPT
SAE
ITEM 9-4708
$133.20 $120.70 each ITEM 9-4414
• Brand new PRINCE Model RD1075SH.
Use to have cylinders operate in sequence. • Brand new PRINCE. Double pilot oper- $102.85
ated lock valve designed to lock a cylinder • Brand new CROSS. Sequence valve
Adjustable pilot pressure. Allows oil to be designed to alternately operate a pair of
directed toward sequence port. Check in place when control valve is in the neutral
position. Double internal pilot checks. agricultural guide marker cylinders on a
valve allows flow from sequence to inlet planter row marker system. Valve plumbs
port so cylinder can retract. Drain port must SPECIFICATIONS
• PSI 3000 • Size 5˝ x 2˝ x 13/4˝ • Shpg. 9 lbs. into the lift cylinder circuit on the planter.
be connected to tank. Can be used on single or double acting
SPECIFICATIONS ITEM Model Ports GPM marker cylinders. 2 GPM, rated 2500 PSI,
• Inlet/Sequence • Adj. pilot 1400-2500 PSI 9-5606-50 RD1450 1/2˝ NPT 25 three ports SAE 8. Shpg. 6 lbs.
ports 3/4˝ NPT • Size 61/2˝ x 13/4˝ x 4˝
• Drain port 3/8˝ NPT • Shpg. 8 lbs. 9-5606-75 RD1475 3/4˝ NPT 30
34 Hydraulic Solenoid Valves California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov
SPECIFICATIONS
• Adj. relief valve set at 750 PSI • Adj. range 500 to 1000 PSI • PSI max.: Inlet 3000, Outlet 3500 • Factory set PSI differential between sections 750 PSI
2 Section 50:50 Dividers
Input GPM Output GPM Per Section Ports
ITEM Displ. Min. Max. Min. Max. Inlet Outlet Size Shpg. Price
9-8402-2 0.11 1.8 4.2 0.9 2.1 SAE 8 SAE 8 6.49˝ x 3.94˝ x 4.66˝ 11 lbs. $219.45
9-8403-2 0.251 4.3 9.7 2.2 4.8 SAE 10 SAE 10 7.08˝ x 3.94˝ x 4.66˝ 12 lbs. $226.80
9-8404-2 0.323 5.9 12.5 2.8 6.3 SAE 10 SAE 10 7.38˝ x 3.94˝ x 4.66˝ 13 lbs. $231.35
9-8405-2 0.479 8.3 18.6 4.1 9.3 SAE 10 SAE 10 8.03˝ x 3.94˝ x 4.66˝ 15 lbs. $238.15
4 Section 25:25:25:25
Input GPM Output GPM Per Section Ports
ITEM Displ. Min. Max. Min. Max. Inlet Outlet Size Shpg. Price
9-8402-4 0.11 3.8 8.6 0.95 2.1 SAE 8 SAE 8 9.77˝ x 3.94˝ x 4.66˝ 19 lbs. $434.35
9-8403-4 0.251 8.6 19.5 2.2 4.9 SAE 10 SAE 8 10.94˝ x 3.94˝ x 4.66˝ 21 lbs. $452.90
9-8404-4 0.323 11.2 25.7 2.8 6.3 SAE 10 SAE 8 11.55˝ x 3.94˝ x 4.66˝ 22 lbs. $457.60
9-8405-4 0.479 16.6 37.3 4.1 9.3 SAE 10 SAE 8 12.84˝ x 3.94˝ x 4.66˝ 26 lbs. $465.35
Inline Check Valves Pilot Operated
• Brand new, DYNAMIC HSP series hard seat, inline check
valves. Available with NPT or SAE ports with 5 PSI or 65 PSI
Check Valves
cracking pressures. Plated steel. • Brand new, pilot operated check valves.
In one direction oil passes freely through
the valve to the cylinder. In the other direc-
tion flow is blocked in the cylinder by the
PSI Rated Width valve until pressure is applied at the pilot
ITEM (Max) GPM Ports (Across Flats) Length Shpg. Price port allowing flow from the cylinder back
5 PSI Cracking through the valve.
9-7933-4-5 5000 6 1/4˝ NPT 0.87˝ 2.44˝ 1/2 lb. $14.35
9-7933-6-5 5000 10 3/8˝ NPT 0.95˝ 2.87˝ 1/2 lb. $17.65
9-7933-8-5 5000 18 1/2˝ NPT 1.14˝ 3.50˝ 1 lb. $18.05
9-7933-12-5 3000 30 3/4˝ NPT 1.50˝ 4.25˝ 2 lbs. $26.60
9-7933-16-5 3000 36 1˝ NPT 1.69˝ 5.12˝ 3 lbs. $37.40 SPECIFICATIONS
7 lbs. $65.35 • Max. 3000 PSI • Decompression ratio 16:1
NPT
9-7934-16-5 3000 36 SAE 16 1.81˝ 5.00˝ 3 lbs. $41.05 ITEM 9-8408-38 $58.15
SAE
9-7934-20-5 3000 50 SAE 20 2.41˝ 5.20˝ 7 lbs. $66.65 SPECIFICATIONS • Max. pressure 3000 PSI
9-7934-24-5 3000 60 SAE 24 2.56˝ 5.20˝ 8 lbs. $68.30 • Model PC37C • Max. flow 8 GPM
• Inlet port 3/8˝ NPT female • Pilot ratio 4:1
65 PSI Cracking • Outlet port 3/8˝ NPT male • Size 37/16˝ x 5/8˝ x 19/16˝
9-7934-4-65 5000 6 SAE 4 0.87˝ 2.56˝ 1/2 lb. $16.00 • Pilot port 1/4˝ NPT • Shpg. 11/2 lbs.
9-7934-6-65
9-7934-8-65
5000
5000
10
18
SAE 6
SAE 8
0.94˝
1.18˝
2.91˝
3.74˝
1/2 lb. $19.30
1 lb. $19.70 ITEM 9-8408-50 $60.80
9-7934-12-65 3000 30 SAE 12 1.50˝ 4.29˝ 2 lbs. $29.20 SPECIFICATIONS • Max. pressure 3000 PSI
• Model PC50C • Max. flow 16 GPM
9-7934-16-65 3000 36 SAE 16 1.81˝ 5.00˝ 3 lbs. $41.05 • Inlet port 1/2˝ NPT female • Pilot ratio 4:1
9-7934-20-65 3000 50 SAE 20 2.41˝ 5.20˝ 7 lbs. $66.65 • Outlet port 1/2˝ NPT male • Size 315/16˝ x 3/4˝ x 129/32˝
• Pilot port 1/4˝ NPT • Shpg. 11/2 lbs.
9-7934-24-65 3000 60 SAE 24 2.56˝ 5.20˝ 8 lbs. $68.30
38 Hydraulic SPX Stone Powerpacks California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov
9-1478 9-1480
9-1479 9-1790
• Brand new SPX STONE. Hydraulic power packs for operating hydraulic cylinders. Steel reservoir
tank with inlet strainer, magnet and filtered filler/breather. Built in check valve and adjustable relief
valve. See chart for details about control valves, tank size and pressure ratings.
SPECIFICATIONS (all models)
• Flow rate 1.3 GPM at max PSI • 12 VDC motor • Needle bearings • Intermittent duty
Relief Valve Tank Size
ITEM Valve Type Ports Factory Set Cap. Useable Size Shpg. Price
9-1478 Single Acting Lever Operated 3/8˝ NPT 2500 PSI 3 qt. 2.3 qt. 21˝ x 9˝ x 7˝ 38 lbs. $407.50
9-1479 Single Acting 12 Volt DC w/handheld remote SAE 6 2500 PSI 3 qt. 2.3 qt. 21˝ x 8˝ x 6˝ 39 lbs. $433.50
9-1790 Single Acting 12 Volt DC w/handheld remote SAE 6 1100 PSI 2.5 gal. 1.6 gal. 26˝ x 8˝ x 83/8˝ 40 lbs. $461.45
9-7412 Single Acting 12 Volt DC w/handheld remote SAE 6 2500 PSI 2.5 gal. 1.6 gal. 25˝ x 87/16˝ x 8˝ 40 lbs. $462.25
9-1480 Double Acting 12 Volt DC (does not include remote) SAE 6 2500 PSI 3 qt. 2.3 qt. 21˝ x 8˝ x 7˝ 40 lbs. $455.00
9-7413 Double Acting 12 Volt DC (does not include remote) SAE 6 2500 PSI 2.5 gal. 1.6 gal. 25˝ x 8˝ x 7˝ 41 lbs. $468.95
9-7411 None (use with external valve) SAE 6 2500 PSI 2.5 gal. 1.6 gal. 25˝ x 7˝ x 8˝ 40 lbs. $410.50
• Brand new, SPX hydraulic power packs. All models include motor, gear pump
and steel reservoir tank with filtered filler/breather. Horizontal mount. Select from
a variety of valve options in chart below.
SPECIFICATIONS (all models)
• 2 HP TEFC motor • 3450 RPM • Continuous duty
• 115/230 VAC, 1 Ph. • 22/11 Amps • Port(s) SAE 6
Controls ▲! Powerpack ▲
!
• Brand new PRINCE. Hand operated hy- • Brand new, BRAND. Double action hand
draulic pumps for single acting cylinders. pump displaces oil on both forward and
• Quick change. Choose from three pressure return motion for rapid cylinder travel. Choice of
and volume rates with 3 position fulcrum. integral tank (ITEM 9-4144) or port for use with
Magnetic plug in reservoir. Can be mounted external tank (ITEM 9-3509).
vertical or horizontal.
SPECIFICATIONS
SPECIFICATIONS • 0.6 cu. in./complete stroke • Adj. relief valve
• Volume and Pressure Settings • 143/4˝ handle • 3000 PSI • Lever release
Position 1: 1.25 cu. in. per stroke - 1500 PSI * • IN check valve • Port SAE 6
Position 2: 0.95 cu. in. per stroke - 2000 PSI * • Release valve
Position 3: 0.60 cu. in. per stroke - 3000 PSI * • Press. port 3/8˝ NPT
* At applied force of 60-65 lbs. on handle. Pressure to 6000 PSI can be developed with more force. Tank Size
Tank ITEM Model Capacity (not including handle) Shpg. Price
ITEM Model Capacity Size Shpg. Price 9-4144 HP61DA80 80 cu. In. 7˝ x 41/2˝ 131/2˝ 16 lbs. $217.90
9-5201 PM-HP-5-B 1/2 Gallon 11˝ x 101/4˝ x 71/2˝ 33 lbs. $527.05 9-3509 HP61DATL None * 7˝ x 41/2˝ x 51/2˝ 13 lbs. $221.60
9-014 PM-HP-10-B 1 Gallon 161/2˝ x 101/4˝ x 71/2˝ 34 lbs. $560.85 * 1/4˝ NPT port for use with external reservoir (not included)
& 800-488-3407 Hydraulic Gear Pumps 41
Hydraulic Clutch Pumps
• Brand new. Hydraulic pump driven by 12 volt DC clutch.
For use in marine, agricultural and industrial use. Use for
remote hydraulics in service trucks, boats, trucks with
automatic transmissions, farm tractors, snowplows, etc.
SPECIFICATIONS FOR ALL
• 12 VDC operation • 3000 RPM max. • Cast iron foot mount
• CW rotation • Rear ports: IN SAE 16, OUT SAE 12
Three Styles Available V-Belt
V-Belt: 7˝ diam. 2 belt 1/2˝ A type v-belt clutch
Serpentine
6 Groove Serpentine: 6˝ diam., 6 groove serpentine clutch
Replacement Pump
8 Groove Serpentine: 57/8˝ diam., 8 groove serpentine clutch
GPM at Replacement Pumps
ITEM # 2000 RPM Displ. PSI Shpg. Price ITEM Shpg. Price
9-1737 V-Belt 12 GPM 1.45 cu. in. 3000 32 lbs. $674.65 9-1737-P 16 lbs. $492.25
9-1738 V-Belt 20 GPM 2.32 cu. in. 2200 33 lbs. $699.10 9-1738-P 16 lbs. $504.30
9-1737-S-6 6 Groove 12 GPM 1.45 cu. in. 3000 32 lbs. $714.20
9-1738-S-6 6 Groove 20 GPM 2.32 cu. in. 2200 33 lbs. $739.40
9-1737-S-8 8 Groove 12 GPM 1.45 cu. in. 3000 32 lbs. $699.10
9-1738-S-8 8 Groove 20 GPM 2.32 cu. in. 2200 33 lbs. $716.65
• Brand new DYNAMIC GP-F10 hydraulic gear pumps. SPECIFICATIONS FOR GP-F10 SERIES
Aluminum housing • Mount SAE AA 2 bolt
• Shaft 1/2˝ diam. x 11/16˝ with 1/8˝ keyway
Choose pump suffix key for rotation facing shaft.
Rotation Suffix Key: -B CW (clockwise) -D CCW (counter-clockwise)
Suffix GPM at PSI Ports RPM Ports
ITEM Code Displ. 2000 RPM Peak IN Max. OUT Shpg. Price
9-7762- 0.07 0.56 3770 SAE 8 6000 SAE 6 4 lbs. $99.80
9-7763- 0.12 0.97 3770 SAE 8 6000 SAE 6 5 lbs. $99.80
9-7764- 0.16 1.29 3770 SAE 8 5000 SAE 6 5 lbs. $99.80
9-7765- 0.20 1.61 3770 SAE 8 5000 SAE 6 5 lbs. $99.80
9-7766- 0.25 2.01 3625 SAE 8 5000 SAE 6 6 lbs. $108.55
9-7767- 0.31 2.50 3625 SAE 8 4000 SAE 6 6 lbs. $108.55
9-7768- 0.37 2.98 3480 SAE 8 4000 SAE 6 6 lbs. $108.55
9-7769- 0.49 3.95 3480 SAE 8 4000 SAE 6 7 lbs. $108.55
9-7770- 0.55 4.43 3190 SAE 8 3000 SAE 6 8 lbs. $108.55
9-7771- 0.66 5.31 3190 SAE 8 3000 SAE 6 9 lbs. $108.55
9-7772- 0.82 6.60 3190 SAE 8 3000 SAE 6 10 lbs. $108.55
GP-F20 Series
• Brand new DYNAMIC GP-F20 hydraulic gear pumps.
SPECIFICATIONS FOR GP-F20 SERIES
Aluminum housing with cast iron end covers. • Mount: SAE A 2 bolt
Pumps available in shaft sizes of 5/8˝ diam. x 11/4˝ 9T spline or 5/8˝ diam. x 11/4˝ with 5/32˝ wide keyway
Choose pump suffix key for shaft type and rotation facing shaft.
-A CW Splined -B CW Keyed -C CCW Splined -D CCW Keyed
Suffix GPM at PSI Ports RPM Ports
ITEM Code Displ. 2000 RPM Peak IN Max. OUT Shpg. Price
9-7786- 0.24 1.93 3650 SAE 12 3600 SAE 10 10 lbs. $116.75
9-7787- 0.36 2.90 3650 SAE 12 3600 SAE 10 10 lbs. $116.75
9-7788- 0.48 3.87 3650 SAE 12 3600 SAE 10 10 lbs. $116.75
9-7789- 0.61 4.91 3650 SAE 12 3600 SAE 10 10 lbs. $116.75
9-7790- 0.73 5.88 3650 SAE 12 3600 SAE 10 11 lbs. $116.75
9-7791- 0.85 6.84 3650 SAE 12 3600 SAE 10 11 lbs. $122.60
9-7792- 0.97 7.81 2900 SAE 12 3600 SAE 10 11 lbs. $124.90
9-7793- 1.22 9.82 2900 SAE 12 3600 SAE 10 11 lbs. $125.50
9-7794- 1.52 12.24 2900 SAE 12 3600 SAE 10 12 lbs. $125.50
9-7795- 1.83 14.74 2300 SAE 16 3600 SAE 12 12 lbs. $125.50
9-7796- 1.95 15.70 2300 SAE 16 3600 SAE 12 12 lbs. $125.50
GP-F25 Series
• Brand new DYNAMIC GP-F25 hydraulic gear pumps. SPECIFICATIONS FOR GP-F25 SERIES
• Mount: SAE B 2 bolt
Aluminum housing with cast iron end covers.
Pumps available in shaft sizes of 7/8˝ diam. x 1.81 13T spline or 7/8˝ diam. x 1.61˝ with ¼˝ keyway
Choose pump suffix key for shaft type and rotation facing shaft.
-A CW Splined -B CW Keyed -C CCW Splined -D CCW Keyed
Suffix GPM at PSI Ports RPM Ports
ITEM Code Displ. 2000 RPM Peak IN Max. OUT Shpg. Price
9-12240- 1.34 10.79 3625 SAE 16 3000 SAE 12 20 lbs. $207.95
9-12241- 1.57 12.64 3625 SAE 16 3000 SAE 12 20 lbs. $210.65
9-12242- 2.07 16.67 3625 SAE 16 3000 SAE 12 22 lbs. $212.50
9-12243- 2.38 19.16 3625 SAE 16 3000 SAE 12 22 lbs. $215.25
9-12244- 2.62 21.1 3625 SAE 16 2800 SAE 12 22 lbs. $217.95
9-12245- 3.11 25.04 3625 SAE 16 2800 SAE 12 23 lbs. $220.70
9-12246- 3.84 30.92 2900 SAE 16 2800 SAE 12 24 lbs. $222.55
9-12247- 4.27 34.38 2900 SAE 20 2500 SAE 16 25 lbs. $227.10
9-12248- 4.76 38.33 2900 SAE 20 2300 SAE 16 26 lbs. $231.65
9-12249- 5.43 43.72 2600 SAE 20 2000 SAE 16 27 lbs. $235.30
California
Residents ▲ WARNING:Cancer and Reproductive Harm
! For more information refer to:www.P65Warnings.ca.gov Hydraulic PTO & John Deere Pumps 43
PTO Drive Hydraulic Gear Pumps
• Brand new PRINCE. Hydraulic PTO gear pump ideal for adding hydraulic power to tractors and landscape equipment not
already equipped with hydraulic circuits. Use to power hydraulic motors, front end loaders, mowers, rotary sweepers, etc. Two
self-adjusting wear plates. Roller bearings on internally splined shaft.
• Center section available in high strength aluminum alloy for standard duty cycle or high strength cast iron for high duty cycle use.
• PSI 2250. Port adapters are included for hosebarb inlet and NPT outlet. Requires the addition of a restraining torque arm to
prevent pump body rotation.
• Brand new RELIANCE replacement pressure compensated radial piston pump for use with many models of John Deere farm tractors
and industrial equipment. See our website for a list of John Deere machines this pump is compatible with. Pump is 100% new, not rebuilt
or remanufactured and has been run on test bench to check pressures and functionality. Pump carries a 1-year parts and labor warranty.
9-8564
44 Log Splitter Pumps 8 www.surpluscenter.com
DELI-BUCHER Hydraulics Two Stage Hydraulic Pumps
• Brand new DELI-BUCHER Hydraulics, two stage HI/LO pressure hydraulic gear pumps.Ideal for applications such as log splitters,
presses and other equipment where rapid movement of the cylinder at low pressure is required prior to automatically switching to
the high pressure mode to meet load requirements
SPECIFICATIONS FOR ALL
• Pump type gear • Speed 3600 RPM max. • Rqd. filtration 25 micron
• Rotation CW • Unloading pressure 650 PSI • Shaft 1/2˝ dia. x 11/2˝ keyed
• Press. 3000 PSI max. • Mount 4 bolt USA 4F17 • Cast Iron Front and Aluminum Body
SPECIFICATIONS
• Output shaft 1˝ dia. x 23/4˝ w/ 1/4˝ keyway
• Base mount four 3/16-16 tapped holes, 25/16˝ x 13/4˝
• Max. speed 4400 RPM
• Ball bearings
Foot Mounts 1-3242 1-3243 1-3244 1-3245 • Size 31/2˝ x 23/4˝ x 37/8˝
• Shpg. 9 lbs.
Pilot Centerline
ITEM Pump Flange Dia. Height Size Shpg. Price ITEM Input Shaft Price
1-3242 4F17 (2˝ sq.) 1.78˝ 3.59˝ 37/8˝ x 11/2˝ x 43/4˝ 2 lbs. $23.65 13-1561 1˝ dia. keyed $271.55
1-3243 SAE AA (2 bolt, 31/4˝ c/c) 2˝ 3.59˝ 37/8˝ x 11/2˝ x 43/4˝ 2 lbs. $26.35
1-3244 SAE A (2 bolt, 43/16˝ c/c) 3.25˝ 31/4˝ 51/8˝ x 41/8˝ x 53/4˝ 3 lbs. $31.05
1-3245 SAE B (2 bolt, 53/4˝ c/c) 4˝ 51/4˝ 51/2˝ x 3˝ x 8˝ 4 lbs. $40.50
1-3246 1-3247
1-3248 1-3437
Electric Motor to Pump Mounts 1-3895
SAE A 2 Bolt Input Mount ▲
!
Pilot Total SPECIFICATIONS
ITEM Pump Flange Dia. Motor Frame Length Shpg. Price • Output shaft 1˝ dia. x 23/4˝ w/ 1/4˝ keyway
• Base mount four 3/16-16 tapped holes, 25/16˝ x 13/4˝
1-3246 4F17 (2˝ sq.) 1.78˝ 56C, 143TC, 145TC 41/4˝ 5 lbs. $36.95 • Max. speed 4400 RPM
1-3247 SAE AA (2 bolt, 31/4˝ c/c) 2˝ 56C, 143TC, 145TC 41/4˝ 5 lbs. $36.95 • Ball bearings
• Size 51/2˝ x 23/4˝ x 41/8˝
1-3895 SAE AA (2 bolt, 31/4˝ c/c) 2˝ 56C, 143TC, 145TC 31/2˝ 3 lbs. $32.95 • Shpg. 12 lbs.
1-3248 SAE A (2 bolt, 43/16˝ c/c) 3.25˝ 56C, 143TC, 145TC 41/4˝ 5 lbs. $40.95
ITEM Input Shaft Price
182TC, 184TC, 213TC
1-3713-5.81
SAE
A (2 bolt, 43/16˝ c/c) 3.25˝ 215TC, 254TC, 256TC 5.81˝ 5 lbs. $42.95 13-1562-A 1˝ dia. keyed $271.55
SAE B (2 bolt, 53/4˝ c/c) 13-1562-B 5/8˝ dia. keyed $290.25
1-3437*
and (4 bolt, 41/8˝ c/c) 4˝ 284TC, 286TC 8˝ 14 lbs. $49.95 13-1562-C 3/4˝ dia. keyed $309.00
*not Hydra-Mount
Cylinder Definitions
Bore - Inside diameter of cylinder Double Acting - Cylinder is powered both
Rod Port Base Port ways (two way)
Stroke - How far a cylinder extends out Rod Diam.
8˝ Bore Prince Standard Duty SPECIFICATIONS: Ports SAE 16, 21/2˝ dia. pins.
Welded Cylinders Rod Retracted
ITEM Stroke Dia. Lgth. Shpg. Price
• Brand new PRINCE 3000 PSI standard duty double acting
cylinders. Features include welded construction, fully chromed 8˝ 9-8423-8 8˝ 4˝ 24˝ 250 lbs. $1826.55
piston rod, ductile iron piston and thread-in gland and crosstube 9-8423-12 12˝ 4˝ 28˝ 275 lbs. $1885.40
ends on both ends with grease zerks. These are drop ship only items. 9-8423-16 16˝ 4˝ 32˝ 300 lbs. $2002.85
B 9-8423-20 20˝ 4˝ 36˝ 325 lbs. $2151.90
O 9-8423-24 24˝ 4˝ 40˝ 350 lbs. $2212.90
R 9-8423-30 30˝ 4˝ 46˝ 385 lbs. $2306.05
E 9-8423-36 36˝ 4˝ 52˝ 425 lbs. $2433.20
9-8423-48 48˝ 4˝ 66˝ 500 lbs. $2946.60
9-8423-54 54˝ 4˝ 73˝ 540 lbs. $2962.95
9-8423-60 60˝ 4˝ 80˝ 580 lbs. $3089.45
54 Wolverine Welded Crosstube Cylinders 8 www.surpluscenter.com
• Brand new, WOLVERINE by PRINCE double acting 3000 PSI SPECIFICATIONS: Ports SAE 8, 1˝ dia. pins.
rated cylinders. Features include 100% tested for quality assurance,
North American sourced seals, hard chromed rod, cast steel ends Rod Retracted
with grease zerks, o-ring ports, thread-in gland and black paint. ITEM Stroke Dia. Lgth. Shpg. Price
9-8773-4 4˝ 11/2˝ 12˝ 19 lbs. $166.45
9-8773-6 6˝ 11/2˝ 14˝ 22 lbs. $174.50
9-8773-8 8˝ 11/2˝ 16˝ 24 lbs. $182.45
3˝ 9-8773-10 10˝ 11/2˝ 18˝ 27 lbs. $190.30
Dimensional Data
9-8773-12 12˝ 11/2˝ 20˝ 29 lbs. $198.05
Base Gland Crosstube
9-8773-14 14˝ 11/2˝ 22˝ 32 lbs. $206.05
Bore
Barrel to
OD Pin Ctr
to
Pin Ctr
Width
Base Rod
B 9-8773-16 16˝ 11/2˝ 24˝ 34 lbs. $214.00
O
11/2˝ 2˝ 11/4˝ 25/8˝ 21/4˝ 2˝
9-8773-18 18˝ 11/2˝ 26˝ 36 lbs. $221.95
2˝ 21/2˝ 11/2˝ 21/4˝ 23/4˝ 21/4˝
21/2˝ 3˝ 11/2˝ 21/4˝ 31/4˝ 21/4˝ R 9-8773-20 20˝ 11/2˝ 28˝ 39 lbs. $229.80
3˝ 31/2˝ 11/2˝ 21/4˝ 33/4˝ 21/4˝ E 9-8773-24 24˝ 11/2˝ 32˝ 44 lbs. $245.20
31/2˝ 4˝ 2˝ 4˝ 41/4˝ 21/4˝ 9-8773-30 30˝ 11/2˝ 38˝ 51 lbs. $268.80
4˝ 41/2˝ 21/4˝ 33/4˝ 43/4˝ 21/2˝ 9-8773-32 32˝ 11/2˝ 40˝ 54 lbs. $277.45
SPECIFICATIONS: Ports SAE 4, 3/4˝ dia. pins. 9-8773-36 36˝ 11/2˝ 44˝ 59 lbs. $293.75
9-8773-40 40˝ 11/2˝ 48˝ 63 lbs. $309.35
Rod Retracted
11/2˝ ITEM Stroke Dia. Lgth. Shpg. Price
9-8773-42 42˝ 11/2˝ 50˝ 65 lbs. $325.00
9-8770-4 4˝ 1˝ 12˝ 8 lbs. $ 95.05 9-8773-48 48˝ 11/2˝ 56˝ 73 lbs. $342.55
9-8770-6 6˝ 1˝ 14˝ 9 lbs. $ 99.70
B 9-8770-8 8˝ 1˝ 16˝ 10 lbs. $104.20 SPECIFICATIONS: Ports SAE 8, 11/4˝ dia. pins.
O 9-8770-10 10˝ 1˝ 18˝ 11 lbs. $108.75 Rod Retracted
R 9-8770-12 12˝ 1˝ 20˝ 13 lbs. $113.20 ITEM Stroke Dia. Lgth. Shpg. Price
E 9-8770-14 14˝ 1˝ 22˝ 14 lbs. $117.70 9-8774-8 8˝ 13/4˝ 18˝ 33 lbs. $224.50
9-8770-16 16˝ 1˝ 24˝ 15 lbs. $122.30 9-8774-10 10˝ 13/4˝ 20˝ 36 lbs. $234.05
9-8770-18 18˝ 1˝ 26˝ 16 lbs. $127.35 31/2˝ 9-8774-12 12˝ 13/4˝ 22˝ 39 lbs. $243.55
9-8774-14 14˝ 13/4˝ 24˝ 42 lbs. $253.15
SPECIFICATIONS: Ports SAE 6, 1˝ dia. pins. 9-8774-16 16˝ 13/4˝ 26˝ 45 lbs. $262.55
B 9-8774-18 18˝ 13/4˝ 28˝ 48 lbs. $272.15
Rod Retracted
ITEM Stroke Dia. Lgth. Shpg. Price O 9-8774-20 20˝ 13/4˝ 30˝ 51 lbs. $282.00
9-8771-4 4˝ 11/4˝ 12˝ 12 lbs. $118.05 R 9-8774-24 24˝ 13/4˝ 34˝ 57 lbs. $301.80
9-8771-6 6˝ 11/4˝ 14˝ 13 lbs. $123.85 E 9-8774-30 30˝ 13/4˝ 40˝ 67 lbs. $329.05
2˝ 9-8771-8 8˝ 11/4˝ 16˝ 15 lbs. $129.55 9-8774-32 32˝ 13/4˝ 42˝ 70 lbs. $339.00
9-8771-10 10˝ 11/4˝ 18˝ 17 lbs. $135.30 9-8774-36 36˝ 13/4˝ 46˝ 76 lbs. $358.35
B 9-8771-12 12˝ 11/4˝ 20˝ 19 lbs. $140.90 9-8774-40 40˝ 13/4˝ 50˝ 82 lbs. $377.75
O 9-8771-14 14˝ 11/4˝ 22˝ 20 lbs. $146.65 9-8774-42 42˝ 13/4˝ 52˝ 85 lbs. $397.15
9-8771-16 16˝ 11/4˝ 24˝ 22 lbs. $152.50 9-8774-48 48˝ 13/4˝ 58˝ 94 lbs. $415.55
R 9-8771-18 18˝ 11/4˝ 26˝ 24 lbs. $158.20
E 9-8771-20 20˝ 11/4˝ 28˝ 25 lbs. $163.85 SPECIFICATIONS: Ports SAE 8, 11/2˝ dia. pins.
9-8771-24 24˝ 11/4˝ 32˝ 29 lbs. $175.15 Rod Retracted
9-8771-30 30˝ 11/4˝ 38˝ 34 lbs. $192.40 ITEM Stroke Dia. Lgth. Shpg. Price
9-8771-32 32˝ 11/4˝ 40˝ 36 lbs. $199.00 9-8775-8 8˝ 2˝ 18˝ 41 lbs. $271.00
9-8771-36 36˝ 11/4˝ 44˝ 39 lbs. $211.15 9-8775-10 10˝ 2˝ 20˝ 45 lbs. $283.30
9-8775-12 12˝ 2˝ 22˝ 49 lbs. $294.55
SPECIFICATIONS: Ports SAE 8, 1˝ dia. pins. 9-8775-14 14˝ 2˝ 24˝ 52 lbs. $305.75
9-8775-16 16˝ 2˝ 26˝ 56 lbs. $316.80
ITEM
Rod Retracted
Stroke Dia. Lgth. Shpg. Price
4˝ 9-8775-18 18˝ 2˝ 28˝ 60 lbs. $328.15
9-8772-4 4˝ 11/2˝ 12˝ 16 lbs. $142.10 9-8775-20 20˝ 2˝ 30˝ 63 lbs. $339.40
9-8772-6 6˝ 11/2˝ 14˝ 18 lbs. $149.35 B 9-8775-24 24˝ 2˝ 34˝ 71 lbs. $361.95
21/2˝ 9-8772-8 8˝ 11/2˝ 16˝ 20 lbs. $156.65 O 9-8775-30 30˝ 2˝ 40˝ 82 lbs. $395.25
9-8772-10 10˝ 11/2˝ 18˝ 22 lbs. $163.85 9-8775-32 32˝ 2˝ 42˝ 85 lbs. $406.55
B 9-8772-12 12˝ 11/2˝ 20˝ 25 lbs. $170.90
R 9-8775-36 36˝ 2˝ 46˝ 93 lbs. $429.15
O 9-8772-14 14˝ 11/2˝ 22˝ 27 lbs. $178.15 E 9-8775-40 40˝ 2˝ 50˝ 100 lbs. $451.90
9-8772-16 16˝ 11/2˝ 24˝ 29 lbs. $185.45 9-8775-42 42˝ 2˝ 52˝ 104 lbs. $474.60
R 9-8772-18 18˝ 11/2˝ 26˝ 31 lbs. $192.70 9-8775-48 48˝ 2˝ 58˝ 115 lbs. $497.35
E 9-8772-20 20˝ 11/2˝ 28˝ 34 lbs. $199.90 9-8775-54 54˝ 2˝ 64˝ 126 lbs. $557.95
9-8772-24 24˝ 11/2˝ 32˝ 38 lbs. $214.00 9-8775-60 60˝ 2˝ 70˝ 137 lbs. $618.45
9-8772-30 30˝ 11/2˝ 38˝ 45 lbs. $235.65 9-8775-72 72˝ 2˝ 82˝ 159 lbs. $721.30
9-8772-32 32˝ 11/2˝ 40˝ 47 lbs. $243.55 9-8775-84 84˝ 2˝ 94˝ 181 lbs. $817.45
9-8772-36 36˝ 11/2˝ 44˝ 51 lbs. $258.60 9-8775-96 96˝ 2˝ 106˝ 203 lbs. $911.35
& 800-488-3407 Wolverine Welded Clevis Cylinders 55
Dimensional Data
Clevis Width Inside Width Throat Depth Barrel O.D. Thread • Brand new, WOLVERINE by PRINCE double acting 3000 PSI
Bore A B C D E F G H rated welded clevis cylinders. High quality cylinders that are 100
percent tested for quality assurance. Features include North
11/2˝ 1.75˝ 2.00˝ 0.88˝ 0.88˝ 1.63˝ 1.62˝ 2.00˝ 7/8˝-14 UNF
American sourced seals, hard chromed rod, cast steel clevis ends
2˝ 2.13˝ 2.63˝ 1.13˝ 1.13˝ 2.13˝ 2.12˝ 2.50˝ 11/8˝-12 UNF with threaded on rod clevis, o-ring top ports, thread-in gland and
21/2˝ 2.13˝ 2.63˝ 1.13˝ 1.13˝ 2.13˝ 2.13˝ 3.00˝ 11/8˝-12 UNF high luster black paint.
3˝ 2.63˝ 2.63˝ 1.13˝ 1.13˝ 1.88˝ 2.13˝ 3.50˝ 11/4˝-12 UNF
31/2˝ 2.63˝ 2.75˝ 1.13˝ 1.13˝ 1.88˝ 2.13˝ 4.00˝ 11/2˝-12 UNF SPECIFICATIONS: Ports SAE 8, 1˝ dia. pins.
4˝ 2.63˝ 2.75˝ 1.13˝ 1.13˝ 1.75˝ 2.13˝ 4.50˝ 11/2˝-12 UNF
Rod Retracted
ITEM Stroke Dia. Lgth. Shpg. Price
SPECIFICATIONS: Ports SAE 6, 3/4˝ dia. pins. 9-8779-4 4˝ 11/2˝ 141/4˝ 24 lbs. $175.40
Rod Retracted 9-8779-6 6˝ 11/2˝ 161/4˝ 26 lbs. $183.45
ITEM Stroke Dia. Lgth. Shpg. Price 3˝
11/2˝ 9-8776-4 4˝ 1˝ 141/4˝ 10 lbs. $ 98.35
9-8779-8-S 8˝ 11/2˝ 181/4˝ 29 lbs. $191.35
9-8779-8 8˝ 11/2˝ 201/4˝ 29 lbs. $194.40
9-8776-6 6˝ 1˝ 161/4˝ 11 lbs. $102.90 B 9-8779-10 10˝ 11/2˝ 201/4˝ 31 lbs. $197.50
B 9-8776-8-S 8˝ 1˝ 181/4˝ 12 lbs. $107.45 O 9-8779-12 12˝ 11/2˝ 221/4˝ 34 lbs. $206.95
O 9-8776-8 8˝ 1˝ 201/4˝ 12 lbs. $109.75 9-8779-14 14˝ 11/2˝ 241/4˝ 36 lbs. $215.00
9-8776-10 10˝ 1˝ 201/4˝ 13 lbs. $112.00 R
R 9-8779-16 16˝ 11/2˝ 261/4˝ 39 lbs. $222.90
9-8776-12 12˝ 1˝ 221/4˝ 15 lbs. $116.40 E 9-8779-18 18˝ 11/2˝ 281/4˝ 41 lbs. $230.85
E 9-8776-14 14˝ 1˝ 241/4˝ 16 lbs. $120.90 9-8779-20 20˝ 11/2˝ 301/4˝ 43 lbs. $238.75
9-8776-16 16˝ 1˝ 261/4˝ 17 lbs. $125.50 9-8779-24 24˝ 11/2˝ 341/4˝ 48 lbs. $254.15
9-8776-18 18˝ 1˝ 281/4˝ 18 lbs. $130.60 9-8779-30 30˝ 11/2˝ 401/4˝ 56 lbs. $277.70
9-8779-36 36˝ 11/2˝ 461/4˝ 63 lbs. $302.65
SPECIFICATIONS: Ports SAE 8, 1˝ dia. pins.
Rod Retracted SPECIFICATIONS: Ports SAE 8, 1˝ dia. pins.
ITEM Stroke Dia. Lgth. Shpg. Price Rod Retracted
9-8777-4 4˝ 11/8˝ 141/4˝ 16 lbs. $126.25 ITEM Stroke Dia. Lgth. Shpg. Price
9-8777-6 6˝ 11/8˝ 161/4˝ 17 lbs. $131.70 9-8780-4 4˝ 13/4˝ 141/4˝ 29 lbs. $204.65
2˝ 9-8777-8-S 8˝ 11/8˝ 181/4˝ 19 lbs. $137.10 9-8780-6 6˝ 13/4˝ 161/4˝ 32 lbs. $214.25
9-8777-8 8˝ 11/8˝ 201/4˝ 19 lbs. $139.80
31/2˝ 9-8780-8-S 8˝ 13/4˝ 181/4˝ 35 lbs. $223.60
B 9-8777-10 10˝ 11/8˝ 201/4˝ 20 lbs. $142.50 9-8780-8 8˝ 13/4˝ 201/4˝ 36 lbs. $228.40
O 9-8777-12 12˝ 11/8˝ 221/4˝ 22 lbs. $147.80 B 9-8780-10 10˝ 13/4˝ 201/4˝ 38 lbs. $233.15
$153.30 O 9-8780-12 12˝ 13/4˝ 221/4˝ 41 lbs. $242.70
R 9-8777-14
9-8777-16
14˝ 11/8˝ 241/4˝ 24 lbs.
16˝ 11/8˝ 261/4˝ 25 lbs. $158.75 9-8780-14 14˝ 13/4˝ 241/4˝ 44 lbs. $252.05
E 9-8777-18 18˝ 11/8˝ 281/4˝ 27 lbs. $164.10
R 9-8780-16 16˝ 13/4˝ 261/4˝ 47 lbs. $261.65
9-8777-20 20˝ 11/8˝ 301/4˝ 28 lbs. $169.50 E 9-8780-18 18˝ 13/4˝ 281/4˝ 50 lbs. $271.20
9-8777-24 24˝ 11/8˝ 341/4˝ 31 lbs. $180.20 9-8780-20 20˝ 13/4˝ 301/4˝ 53 lbs. $281.10
9-8777-30 30˝ 11/8˝ 401/4˝ 36 lbs. $196.45 9-8780-24 24˝ 13/4˝ 341/4˝ 59 lbs. $300.90
9-8777-36 36˝ 11/8˝ 461/4˝ 41 lbs. $212.10 9-8780-30 30˝ 13/4˝ 401/4˝ 68 lbs. $328.15
9-8780-36 36˝ 13/4˝ 461/4˝ 78 lbs. $357.45
SPECIFICATIONS: Ports SAE 8, 1˝ dia. pins.
Rod Retracted SPECIFICATIONS: Ports SAE 8, 1˝ dia. pins.
ITEM Stroke Dia. Lgth. Shpg. Price Rod Retracted
9-8778-4 4˝ 11/4˝ 141/4˝ 19 lbs. $144.90 ITEM Stroke Dia. Lgth. Shpg. Price
9-8778-6 6˝ 11/4˝ 161/4˝ 21 lbs. $151.35 9-8781-4 4˝ 2˝ 141/4˝ 35 lbs. $242.90
21/2˝ 9-8778-8-S 8˝ 11/4˝ 181/4˝ 23 lbs. $157.80 9-8781-6 6˝ 2˝ 161/4˝ 38 lbs. $254.00
9-8778-8 8˝ 11/4˝ 201/4˝ 23 lbs. $161.00
4˝ 9-8781-8-S 8˝ 2˝ 181/4˝ 42 lbs. $264.90
9-8778-10 10˝ 11/4˝ 201/4˝ 24 lbs. $164.20 9-8781-8 8˝ 2˝ 201/4˝ 43 lbs. $270.60
B 9-8778-12 12˝ 11/4˝ 221/4˝ 26 lbs. $170.50 B 9-8781-10 10˝ 2˝ 201/4˝ 46 lbs. $276.25
O 9-8778-14 14˝ 11/4˝ 241/4˝ 28 lbs. $176.95 O 9-8781-12 12˝ 2˝ 221/4˝ 49 lbs. $287.50
R 9-8778-16 16˝ 11/4˝ 261/4˝ 30 lbs. $183.45 9-8781-14 14˝ 2˝ 241/4˝ 53 lbs. $298.75
E 9-8778-18 18˝ 11/4˝ 281/4˝ 32 lbs. $189.90
R 9-8781-16 16˝ 2˝ 261/4˝ 57 lbs. $309.80
9-8778-20 20˝ 11/4˝ 301/4˝ 34 lbs. $196.35 E 9-8781-18 18˝ 2˝ 281/4˝ 60 lbs. $321.15
9-8778-24 24˝ 11/4˝ 341/4˝ 38 lbs. $208.85 9-8781-20 20˝ 2˝ 301/4˝ 64 lbs. $332.40
9-8778-30 30˝ 11/4˝ 401/4˝ 44 lbs. $228.10 9-8781-24 24˝ 2˝ 341/4˝ 71 lbs. $354.90
9-8778-36 36˝ 11/4˝ 461/4˝ 49 lbs. $248.70 9-8781-30 30˝ 2˝ 401/4˝ 83 lbs. $388.20
9-8778-48 48˝ 11/4˝ 581/4˝ 60 lbs. $279.60 9-8781-36 36˝ 2˝ 461/4˝ 94 lbs. $422.15
R NTE
SU R
56 Double Rod & Small Bore Hydraulic Cylinders
RPLU
S CENT
ER 8 www.surpluscenter.com
SU
Double Rod
Steering Cylinders
$109.95 • Bore x Stroke 2.5˝ x 18˝ • Clevis Ends • Ports 1/2˝ NPT • Pin Hole 11/4˝
ITEM 9-8072 • Pressure 2500 PSI max. • Pin Holes 1˝ • Retracted Length 31.75˝ • Shpg. 38 lbs.
• Removable 0.078˝ orifice plate in extend port. • Rod Dia. 1.06˝ • Shpg. 32 lbs.
SPECIFICATIONS
• New, double acting • Retracted lgth. 193/4˝ 2.5˝ x 18˝ x 1.125˝ 2.5˝ x 19.69˝ x 1.5˝
• Bore x stroke 21/2˝ x 83/4˝ • Crosstube ends
• Pressure 3000 PSI max.
• Rod dia. 11/2˝
rod 21/4˝ w., base 31/4˝ w.
• Pin holes 11/8˝
ITEM 9-8992-A $79.95
• Ports SAE 8 (see above) • Shpg. 23 lbs. • Same as 9-8992 Except 1.125˝ Rod Dia.
ITEM 9-7164 $109.95
2.5˝ x 18˝ x 1.25˝ SPECIFICATIONS • Crosstube Ends
2.5˝ x 9˝ x 1.25˝ • New, Double Acting • Rod End Crosstube width
• Bore x Stroke 21/2˝ x 1911/16˝ 21/4˝
• Pressure 3000 PSI max. • Base End Crosstube width
• Rod Dia. 11/2˝ 31/4˝
3˝ X 16˝ X 1.5˝
• Bore x Stroke 3˝ x 16˝
• Rod Ends Tapped
• Ports SAE 6, See Above
• Retracted Length 921/2˝ ITEM 9-7942-20 $111.95
• Thread size-Pitch 11/8˝-12 • Shpg. 190 lbs. SPECIFICATIONS • Ports 1/2˝ NPT
Truck freight only • New, Double Acting • Retracted Length 301/4˝
• Bore x Stroke 3˝ x 20˝ • Pin Diam. 1˝
3˝ x 16˝ x 1.75˝ • Pressure 2500 PSI
• Rod Diam. 11/2˝
• Clevis Ends
• Shpg. 40 lbs.
3˝ x 18˝ x 1.75˝
ITEM 9-12189 $85.95 3˝ x 24˝ x 1.5˝
SPECIFICATIONS
• New, Double Acting • Rod Dia. 1.50˝
• Bore x Stroke 3˝ x 16˝ • Rod End Plane end.
• Pressure 2500 PSI max.
• Pin Hole 1˝
• Rod End O.D. 1.50˝
• Base End Crosstube
ITEM 9-12123 $102.95 ITEM 9-12291 $119.95
SPECIFICATIONS SPECIFICATIONS • Rod Dia.1.5˝
• Ports SAE 8 • Base End Width 3.50˝ • New, Double Acting • Pin Hole 1˝ • Ports SAE 8
• Retracted Length 25.75˝ • New, Double Acting
• Shpg. 34 lbs. • Clevis Ends • Port Base End 1/2 NPT • Retracted Length 34.25˝
• Bore x Stroke 3˝ x 24˝
• Bore x Stroke 3˝ x 18˝ • Port Rod End 3/8 NPT • Gland Retainer Threaded • Clevis Ends
• Pressure 3000 PSI max.
3˝ x 16˝ x 1.5˝ • Rod Dia. 1.75˝
• Retracted Length 28˝
• Shpg. 43 lbs.
in gland
• Pressure 3000 PSI max.
• Pin Holes 1˝
• Shpg. 47 lbs.
SPECIFICATIONS
• Unused, old inventory • Ports 1/4˝ NPT 3.25˝ x 13˝ x 1˝
• Double acting
• Bore x Stroke 3˝ x 36˝
• Retracted lgth. 491/2˝
• Thru-hole ends 23/16˝ wide
ITEM 9-9034 $294.95
• Pressure 3000 PSI max. • Pin holes 11/8˝ • Counter-balance valve with 1.5:1 pilot ratio.
• Rod dia. 11/2˝ hollow • Shpg. 61 lbs. SPECIFICATIONS • Ports SAE 6
• New, old inventory • Retracted lgth. 631/2˝
3˝ x 38˝ x 1.5˝ • Double acting • Crosstube ends
• Bore x Stroke 3˝ x 491/4˝ rod 31/8˝ w., base 45/8˝ w.
• Pressure 3000 PSI max. • Pin holes 13/4˝
ITEM 9-9737 $102.95
• Mounting blocks on each end of cylinder
• Rod dia. 21/2˝ • Shpg. 139 lbs. with two 0.450˝ dia. holes on 23/4˝ centers.
ITEM 9-9820 $169.95 3˝ x 49.25˝ x 2.5˝
Mounting blocks measure 33/4˝ long, 11/4˝
wide, and 1˝ thick at bolt holes.
SPECIFICATIONS
• New, Double Acting • Retracted Length 59˝ SPECIFICATIONS • Wall thickness 1/8˝
• Bore x Stroke 3˝ x 38˝ • Tang w/ Swivel Eye Ends • New, old inventory • Ports 1/2˝ NPT
• Pressure 3000 PSI max. • Max Thickness 15/16˝ • Double acting • Retracted lgth. 203/8˝
• Rod Dia. 11/2
• Ports SAE 6 ˝
• Pin Holes 11/2˝
• Shpg. 84 lbs.
ITEM 9-10226 $229.95 • Bore x Stroke 31/4˝ x 13˝
• Pressure 2500 PSI max.
• Rod end tapped 3/4-16 x 17/16˝
• Base end blank
• Externally adjustable flow control valve • Rod dia. 1˝ • Shpg. 29 lbs.
with reverse flow check in manifold
3˝ x 40˝ x 1.5˝ operates to decelerate retract stroke.
3.25˝ x 15˝ x 1.5˝
SPECIFICATIONS • Width 117/8˝
• Unused, old inventory • Pressure 3000 PSI max.
• Double Acting • Rod Dia. 21/2˝
ITEM 9-12300 $149.95 • Bore x Stroke 3˝ x 491/4˝ • Ports Manifold
SPECIFICATIONS
• New, Double Acting • Crosstube Ends
• Crosstube Ends
• Pin Hole 11/2˝
• Retracted Length 631/2˝
• Shpg. 210 lbs. ITEM 9-9181 $129.95
Truck freight only SPECIFICATIONS
• Bore x Stroke 3˝ x 40˝ • Rod End Width 2.75˝ • New, double acting • Retracted lgth. 30.75˝
• Pressure 3000 PSI max.
• Rod Dia. 1.5˝
• Rod End Inside Width 1.16˝
• Base End Width 3.75˝
3˝ x 49.5˝ x 2.5˝ • Bore x Stroke 31/4˝ x 15˝
• Pressure 2500 PSI max.
• Rod tang w/swivel-eye 7/8˝ w.
• Base end clevis 215/16˝ w.
• Ports SAE 8 • Pin Holes 1˝ • Rod dia. 11/2˝ • Pin holes 1˝
• Retracted Length 48˝ • Shpg. 59 lbs. • Ports SAE 8 • Shpg. 35 lbs.
• Ports 1/2˝ NPT • Pin Center To Base End 3.5˝ x 45.75˝ x 2.5˝
• Retracted Length 25.625˝ 20.625˝
• Rod End Thru-Hole
• Width 1.48˝
• Pin Diameter 1.375˝
• Shpg. 46 lbs. ITEM 9-9187 $249.95
3.5˝ x 20˝ x 1.25˝
• Two thru-holes in rod 2˝ apart on center.
SPECIFICATIONS • Retracted lgth. 383/8˝
ITEM 9-9079 $299.95
• New, double acting • Rod end thru-hole • Counterbalance valve with 1.5:1 pilot ratio.
• Bore x Stroke 31/2˝ x 30˝ Pin hole 1˝ & 1/2˝ SPECIFICATIONS
• Pressure 3000 PSI max. • Base crosstube 413/16˝ w. • Unused, old inventory • Ports SAE 6
• Rod dia. 2˝ Pin hole 1˝ • Double acting • Retracted lgth. 60˝
• Ports 3/8˝ NPT • Shpg. 83 lbs. • Bore x Stroke 31/2˝ x 453/4˝ • Crosstube ends 105/8˝ wide
ITEM 9-4303 $99.95 3.5˝ x 33˝ x 1.375˝
• Pressure 3000 PSI max. • Pin holes 11/2˝
• Rod dia. 21/2˝ • Shpg. 260 lbs.
SPECIFICATIONS Truck freight only
• Unused, old inventory • Retracted Length 30.5˝
• Double Acting • Ports 1/2˝ NPT 3.5˝ x 46˝ x 2.5˝
• Bore x Stroke 3.5˝ x 20˝
• Pressure 2500 PSI max.
• Clevis Ends
• Pin Holes 1˝ ITEM 9-10075 $234.95
• Rod Dia. 1.25˝ • Shpg. 48 lbs. SPECIFICATIONS • Rod clevis 3˝ wide
• Unused, old inventory
• Double acting
• Pin hole 11/4˝
• Male trunnion ITEM 9-10227 $299.95
3.5˝ x 20˝ x 2˝ • Bore x Stroke 31/2˝ x 33˝ trunnion pin width outside • Counter-balance valve with 3:1 pilot ratio.
• Pressure 3000 PSI max. 7˝, inside 5˝ SPECIFICATIONS • Rod dia. 21/2˝
• Rod dia. 13/8˝ pin ctr to rod pin ctr 167/8˝ • New, old inventory • Ports SAE 6
• Ports SAE 8 pin ctr to base end 263/8˝ • Double acting • Retracted lgth. 60˝
• Retracted lgth. 263/8˝ trunnion pin 1˝ dia. x 1˝
$159.95
• Bore x Stroke 31/2˝ x 46˝ • Crosstube ends 115/8˝ wide
ITEM 9-9520 • Rod clevis 3˝ wide • Shpg. 68 lbs. • Pressure 3000 PSI max. • Pin holes 11/2˝
SPECIFICATIONS • Ports SAE 8 • Rod dia. 21/2˝ • Shpg. 240 lbs.
• Unused, old inventory • Retracted lgth. 531/4˝ 3.5˝ x 35˝ x 2˝ Truck freight only
• Double acting
• Bore x Stroke 31/2˝ x 20˝
• Rod thread-on tang 2˝-12
tang thickness 21/2˝ 3.5˝ x 48˝ x 1.5˝
$249.95
• Pressure 3000 PSI max. • Base tang 11/2˝ thick
• Rod dia. 2˝ • Shpg. 105 lbs. ITEM 9-9697
5.5˝ x 63˝ x 4˝
$599.95
Truck freight only
ITEM 9-10175
SPECIFICATIONS • Ports 11/4˝ four bolt SPECIFICATIONS • Pin Hole 13/4˝
• Unused, old inventory flange, code 61 • Unused old inventory • Trunnion Female 6.5˝ x 67.375˝ x 5˝
• Double acting • Retracted lgth. 69˝ • Pin Outside Width 111/8˝
• Bore x Stroke 6˝ x 45˝ • Tang ends w/swivel eye • Double-Acting
• Pressure 3500 PSI max. rod 31/32˝, base 31/8˝ • Bore x Stroke 61/2˝ x 491/2˝ • Pin Inside Width 71/4˝
• Rod dia. 4˝ • Pin holes 31/4˝ • Pressure 3000 PSI max. • Pin Center to Rod Pin
Center 35˝
• Wall thickness 1/2˝ • Shpg. 650 lbs.
Truck freight only.
• Rod Dia. 3˝
• Ports 11/4˝ Four-Bolt Flange, • Pin Center to Base End ITEM 9-10119 $699.95
ITEM 9-10292-L $599.95 Code 61
• Retracted Length 35˝
371/4˝
• Pin Diameter 21/2˝ • One SUN model CKEB-XCN pilot-to-
open check valve with 3:1 pilot ratio and
• Ports face to the left when looking at • Rod End Clevis • Shpg. 490 lbs.
base end of cylinder. Part# 708-7623. Truck freight only 30 gpm capacity, and one unidentifiable
ITEM 9-10292-R $599.95 SUN model cartridge valve.
• Ports face to the right when looking at 6.5˝ x 50˝ x 3˝ SPECIFICATIONS
• New, Double Acting
• Pin Holes 3˝
• Tang w/ Swivel Eye Ends
base end of cylinder. Part# 708-7624.
• Bore x Stroke 61/2˝ x 673/8˝ • Rod End: Max Thickness
• Pressure 3000 PSI max. 25/8˝
6˝ x 47.5˝ x 3.25˝
ITEM 9-9833
SPECIFICATIONS
$599.95 • Rod Dia. 5˝, Hollow
• Ports SAE 12
• Base End: Max Thickness
25/8˝
• Retracted Length 89˝ • Shpg. 575 lbs.
• Unused old inventory • Retracted Length 67.75˝ Truck freight only
ITEM 9-20122 $899.95 ITEM 9-9701 $699.95 • Pressure 3000 PSI max. 59/16˝
• Rod Dia. 140mm (5.512˝) • Base End: Max Thickness
SPECIFICATIONS • Ports SAE 12 • Ports 1˝ Four-Bolt Flange, 51/2˝
SPECIFICATIONS • Ports 11/4˝ Four-Bolt Flange, • Double-Acting • Retracted Length 32.25˝ Code 61 • Shpg. 1020 lbs.
• New, Double-Acting Code 61 • Tang Ends
• Unused old inventory Truck freight only
• Bore x Stroke 71/2˝ x • Retracted Length 58˝
• Bore x Stroke 8.5˝ x 16.5˝ • Pin Holes 33/8˝
30-7/16˝ • Pin Holes 100mm (3.937˝)
• Pressure 3000 PSI max. • Max Thickness 3.5˝
• Pressure 3000 PSI max. • Rod End: Clevis
Shpg. 700 lbs.
• Rod Dia. 4.25˝ • Shpg. 402 lbs. 11˝ x 58˝ x 6.5˝
• Rod Dia. 31/2˝ Truck freight only
Truck freight only
$699.95
• New • Ports SAE 14
ITEM 9-210487
SPECIFICATIONS
ITEM 9-12284 $995.95 • Double acting, telescoping• Retracted lgth. 68˝
• Main cylinder bore x • Crosstube ends
SPECIFICATIONS • Retracted Length 50˝
• Single Acting • Rod End: Flat • Single Acting • Pin Holes 2˝ total stroke 43/4˝ x 63˝ rod 63/16˝ w., base 5˝ w.
• Unused old inventory • Base End: Male Trunnion • Rod End: Tang • Number of stages 2 • Pin holes 2˝
• Unused old inventory • Pressure 2000 PSI max. • Shpg. 360 lbs.
• Main Cyl Bore x Total Pin Outside/Inside Width • Main Cyl Bore x Total Thickness, Max 2.01˝
Stroke 4.5˝ x 51˝ 8.75˝ / 5.3˝ Truck freight only.
Stroke 7.5˝ x 109˝ Pin-Center-To-Tang-End
• Thickness 0.257˝ Pin-Center-To-Rod Pin • Thickness 0.359˝ 1.64˝
• Number of Stages 2
• Pressure 2000
Center 8.5˝
Pin Center To Base End
• Number of Stages 3 • Base End: Cross-Tube 5.25˝ Bore Cylinders
• Rod Dia. 3˝ • Pressure 2000 O.D. 3.11˝
26.625˝
• Ports 1/2˝ NPT Pin Diameter 1.75˝ • Rod Dia. 5˝ Width 8.625˝
• Ports 1˝ NPT • Shpg. 401 lbs.
• Retracted Length 8.5˝ • Shpg. 930 lbs.
Truck freight only.
Truck freight only. 5.25˝ x 56.25˝ x 3.75˝
5.25˝ x 166.125˝ x 2.75˝ 8.5˝ x 46.875˝ x 6.75˝ ITEM 9-8225 $599.99
SPECIFICATIONS
• New • Retract port SAE 16
• Double acting, telescoping• Retracted lgth. 651/2˝
ITEM 9-9394 $1049.95 • Main cylinder bore x • Tang ends with swivel
total stroke 51/4˝ x 561/4˝ eye 1.377˝ (35mm) thick
• Port in end of rod. • Number of stages 2 • Pin holes
SPECIFICATIONS
• Unused, old inventory • Rod tang w/ swivel eye 2˝
ITEM 9-9621 $999.99 • Pressure 2000 PSI max. rod 1.969˝ (50mm),
• Rod dia. 33/4˝ base 1.972˝ (50mm)
SPECIFICATIONS • Extend port SAE 12 • Shpg. 320 lbs.
• Single acting, telescoping Pin hole 11/2˝ • Unused old inventory • Rod dia. 63/4˝
• Main cylinder bore x • Male trunnion Truck freight only.
• Single acting, telescoping • Ports 1˝ NPT
total stroke 51/4˝ x 1661/8˝ trunnion pin width
• Number of stages 3 outside 123/8˝, inside 9˝
• Main cylinder bore x • Retracted lgth. 341/4˝
total stroke 81/2˝ x 467/8˝ • Tang ends 2˝ thick
5.25˝ x 73.75˝ x 3.75˝
• Pressure 2000 PSI max. pin ctr. to rod pin ctr. 111/4˝
• Rod dia. 23/4˝
• Port SAE 12
pin ctr. to base end 611/2˝
trunnion pin 13/4˝
• Number of stages 2 • Pin holes 11/2˝
• Pressure 2000 PSI max. • Shpg. 330 lbs. ITEM 9-8224 $799.99
Truck freight only. SPECIFICATIONS
• Retracted lgth. 111/4˝ • Shpg. 370 lbs. • New • Extend port SAE 16
Truck freight only.
9.75˝ x 66˝ • Double acting, telescoping• Retract port SAE 12
• Main cylinder bore x • Retracted lgth. 651/4˝
5.5˝ x 73.625˝ total stroke 51/4˝ x 733/4˝ • Tang ends with swivel eye
• Number of stages 2 13/8˝ thick
• Pressure 2000 PSI max. • Pin holes 50mm
• Rod dia. 33/4˝ • Shpg. 305 lbs.
ITEM 9-210489 $799.95 ITEM 9-8846 $2495.95 Truck freight only.
Bore - Inside diameter of cylinder Cylinders Definitions Double Acting - Cylinder is powered both
ways (two way)
Stroke - How far a cylinder extends out Rod Port Base Port
Rod Diam. Crosstube End - Round tube welded
R-length - Distance in inches between pin perpendicular to cylinder
centers when cylinder is retracted Bore
Single Eye End - For mounting between
Rod Diameter - Diameter of cylinder rod two mounting ears.
Single Acting - Cylinder is powered one way Stroke Clevis End - Two mounting ears
Retracted Length
78 Double Acting Telescoping Cylinders 8 www.surpluscenter.com
5.5˝ Bore 5.5˝ x 118.5˝ x 4˝ 6.5˝ x 167˝ x 4˝
Telescoping Cylinders
ITEM 9-8170-A $994.95
• New. Mailhot Industries three stage, ITEM 9-10415 $1195.95 SPECIFICATIONS
• Unused, old inventory • Extend port SAE 20
double acting telescoping cylinders. SPECIFICATIONS • Double acting, telescoping• Retract port SAE 16
Cartridge valve installed in rod end. • New, HYCO • Ports SAE 16 • Main cylinder bore x • Retracted lgth. 851/4˝
• Double acting, telescoping• Retracted lgth. 971/2˝ total stroke 61/2˝ x 167˝ • Tang ends with swivel eye
5.5˝ x 134˝ x 3˝ • Main cylinder bore x • Rod tang with swivel
total stroke 51/2˝ x 1181/2˝ eye 21/2˝ thick
• Number of stages 3 rod 2˝ thick, base 3˝ thick
• Pressure 2500 PSI max. • Pin holes 2˝
ITEM 9-7608 $1495.00 • Number of stages 2 • Base crosstube 73/4˝ w.
• Pressure 2000 PSI max. • Pin holes 2˝
• Rod dia. 4˝ • Shpg. 590 lbs.
Truck freight only.
SPECIFICATIONS • Relief valve 2750 PSI • Rod dia. 4˝ • Shpg. 400 lbs.
• Double acting, telescoping• Retract port SAE 12
• Main cylinder bore x • Retracted lgth. 771/2˝
Truck freight only. 6.75˝ x 131˝ x 3˝
total stroke 51/2˝ x 134˝ • Rod crosstube 5˝ w.
• Number of stages 3 • Base tang with swivel 5.5˝ x 132.375˝x 5˝
• Pressure 2000 PSI max. eye 25/8˝ thick
• Rod dia. 3˝
• Extend port SAE 16
• Pin holes 21/2˝
• Shpg. 490 lbs.
ITEM 9-7520 $1449.00
SPECIFICATIONS
Truck freight only.
$1495.00
• New • Ports SAE 14
5.5˝ x 145.25˝ x 3˝ ITEM 9-7611 • Double acting, telescoping• Retracted lgth. 621/2˝
• Main cylinder bore x • Rod tang w/swivel eye 21/2˝
SPECIFICATIONS
ITEM 9-7609 $1495.00 • Double Acting
• Main Cyl Bore x Total
• Retract Port SAE 12
• Retracted Length 76.625˝
total stroke 63/4˝ x 131˝ • Base crosstube 71/4˝ w.
• Number of stages 4 • Pin holes
• Pressure 2000 PSI max. rod 2˝, base 21/8˝
SPECIFICATIONS
Stroke 5.5˝ x 132.375˝ • Cross-Tube Ends • Rod dia. 3˝ • Shpg. 480 lbs.
• Double acting, telescoping• Retract port SAE 12 Truck freight only.
• Main cylinder bore x • Retracted lgth. 771/2˝ • Number of Stages 3 • Rod End Width 6.75˝
total stroke 51/2˝ x 1451/4˝ • Rod crosstube 5˝ w. • Pressure 2500 PSI • Base End Width 4.5˝
• Number of stages 3 • Base tang with swivel • Rod Dia. 5˝ • Pin Holes 2˝ 6.75˝ x 145.125˝
• Pressure 2500 PSI max. eye 211/16˝ thick • Extend Port SAE 16 • Shpg. 463 lbs.
• Rod dia. 3˝ • Pin holes 21/2˝ Truck freight only.
• Extend port SAE 16 • Shpg. 460 lbs.
Truck freight only.
6.25˝ x 168˝ x 2.75˝ ITEM 9-7522 $1598.00
5.5˝ x 156.75˝ x 3˝
SPECIFICATIONS • Rod End Tang w/ Swivel Eye
ITEM 9-7805 $1495.00 • New,Double Acting,
Telescoping
• Max Thickness 21/2˝
• Pin Center to Tang End
SPECIFICATIONS • Extend port SAE 16 • Main Cyl Bore x Total 23/8˝
• Double acting, telescoping• Retract port SAE 12
• Main cylinder bore x • Retracted lgth. 761/2˝ ITEM 9-9585 $995.95 Stroke 63/4˝ X 1451/8˝
• Number of Stages 4
• Pin Hole 2˝
• Base End Crosstube
total stroke 51/2˝ x 1563/4˝ • Rod crosstube 67/8˝ w. SPECIFICATIONS • Pressure 2000 PSI max. • Width 71/4˝
• Number of stages 3 • Base tang 41/2˝ thick • Unused, old inventory • Extend port SAE 20 • Rod Dia. 3˝ • O.D. 3˝
• Pressure 2500 PSI max. • Pin holes 2˝ • Double acting, telescoping• Retract port SAE 16
• Rod dia. 3˝ • Shpg. 460 lbs. • Ports SAE 16 • Pin Hole 21/8˝
• Main cylinder bore x • Retracted lgth. 801/4˝ • Retracted Length 621/2˝ • Shpg. 470 lbs.
Truck freight only. total stroke 61/4˝ x 168˝ • Tang ends with swivel eye Truck freight only.
5.5˝ x 167.875˝ x 3˝ • Number of stages 3 21/4˝ thick
• Pressure 2000 PSI max. • Pin holes 2˝
ITEM 9-7610 $1495.00 • Rod dia. 23/4˝ • Shpg. 560 lbs.
Truck freight only.
7.25˝ x 171.75˝ x 3.75˝
SPECIFICATIONS • Relief valve 2750 PSI
• Double acting, telescoping• Retract port SAE 12 6.25˝ x 182.5˝ x 2.75˝
$999.99
• Main cylinder bore x • Retracted lgth. 771/2˝
total stroke 51/2˝ x 1677/8˝ • Rod crosstube 5˝ w. ITEM 9-8544
• Number of stages 3 • Base tang with swivel SPECIFICATIONS
• Pressure 2000 PSI max. eye 25/8˝ thick • Pin Hole 11/2˝
• Single Acting
• Rod dia. 3˝
• Extend port SAE 16
• Pin holes 21/2˝
• Shpg. 440 lbs. ITEM 9-9105 $2034.95 • Main Cyl Bore x Total
Stroke 7.25˝ x 171.25˝
• Male Trunnion
• Pin Outside/Inside Width
Truck freight only. SPECIFICATIONS • Rod dia. 23/4˝ • Number of Stages 4 12.25˝ / 9˝
5.5˝ x 168.625˝ x 3˝ • New • Extend port SAE 14
• Double acting, telescoping• Retract port SAE 12
• Pressure 2275 PSI
• Rod Dia. 3.75˝
• Pin-To-Rod Pin 15.25˝
• Pin To Base End 59.5˝
• Main cylinder bore x • Retracted lgth. 811/2˝
$1495.00 • Ports 1˝ NPT • Pin Diameter 13/4˝
total stroke 61/4˝ x 1821/2˝ • Crosstube ends 7˝ wide
ITEM 9-7612 • Number of stages 3 • Pin holes 2˝ • Retracted Length 59.5˝ • Shpg. 463 lbs.
SPECIFICATIONS • Extend port SAE 16 • Pressure 2000 PSI max. • Shpg. 580 lbs. Truck freight only.
• Double acting, telescoping• Retract port SAE 12
13˝ x 185˝
Truck freight only.
• Main cylinder bore x • Retracted lgth. 821/4˝
total stroke 51/2˝ x 1685/8˝ • Rod crosstube 67/8˝ w.
• Number of stages 3 • Base tang 41/2˝ thick
6.5˝ x 131.125˝
• Pressure 2000 PSI max. • Pin holes 2˝
$1995.95
• Rod dia. 3˝ • Shpg. 470 lbs.
Truck freight only. ITEM 9-9130
5.5˝ x 177˝ x 3˝ ITEM 9-7534 $1395.00 SPECIFICATIONS • Tang Ends
• Double Acting, Telescoping • Rod End Max Thickness
SPECIFICATIONS • Rod End Tang w/ Swivel Eye • Main Cyl Bore x Total 413/16˝
ITEM 9-7613 $1495.00 • New, Double Acting,
Telescoping
Max Thickness 21/2˝
Pin Center to
Stroke 13˝ X 185˝
• Number of Stages 4
• Rod End Pin Center to
Tang End 57/16˝
SPECIFICATIONS • Extend port SAE 16 • Main Cyl Bore x Total Tang End 25/16˝ • Pressure 1500 PSI max. • Rod End Pin Hole 73/4˝
• Double acting, telescoping• Retract port SAE 12 Stroke 61/2˝ X 1311/8˝ Pin Hole 2˝ • Rod Dia. 61/4˝ • Base End Max Thickness
• Main cylinder bore x • Retracted lgth. 82˝ • Number of Stages 4 • Base End Crosstube • Extend Port 11/2˝ 4-Bolt 329/32˝
total stroke 51/2˝ x 177˝ • Rod crosstube 67/8˝ w. • Pressure 2000 PSI max. Width 71/4˝ Flange, Code 61 • Base End Pin Center to
• Number of stages 3 • Base tang 41/2˝ thick • Rod Dia. 3˝ O.D. 31/4˝ • Retract Port 1˝ 4-Bolt Tang End 45/8˝
• Pressure 2000 PSI max. • Pin holes 2˝ • Ports SAE 16 Pin Hole 21/8˝ Flange, Code 61 • Base End Pin Hole 61/4˝
• Rod dia. 3˝ • Shpg. 470 lbs. • Retracted Length 621/2˝ • Shpg. 420 lbs. • Retracted Length 751/4˝ • Shpg. 2750 lbs.
Truck freight only.
Truck freight only. Truck freight only.
& 800-488-3407 California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov Hydraulic Motors 79
Cross High Speed Hydraulic Gear Motors ▲!
• Brand new CROSS hydraulic gear motors. Pressure balanced loading plates for high efficiency. Aluminum body for
good heat dissipation. Pressure lubricated Teflon impregnated sleeve bearings. Internal check valves eliminate need for
case drain at shaft seal pressures under 250 PSI.
40 Series 50 Series
SPECIFICATIONS
SPECIFICATIONS
• PSI 3000 max. • Mount SAE A 2 Bolt • PSI 3000 max. • Mount SAE B 2 Bolt
• RPM 3000 max. cont. • Ports SAE 12 • RPM 3000 max. cont. • Ports SAE 16
• Reversible rotation drain port 1/4˝ NPT • Reversible rotation drain port SAE 5
• Shaft 5/8˝ x 11/4˝ keyed • Shpg 9 lbs. • Shaft 7/8˝ x 15/8˝ keyed • Shpg 19 lbs.
40 Series HP and torque specifications listed at 2500 PSI 50 Series HP and torque specifications listed at 2500 PSI
GPM for HP at GPM for HP at
ITEM Displ. 1800 RPM Torque 1800 RPM Price ITEM Displ. 1800 RPM Torque 1800 RPM Price
9-7073-50 0.50 4.4 180 in-lbs. 4.8 $216.15 9-7074-195 1.95 17 775 in-lbs. 18 $379.20
9-7073-75 0.75 6.5 280 in-lbs. 7.5 $226.15 9-7074-232 2.32 20 900 in-lbs. 23 $389.05
9-7073-100 1.00 8.8 375 in-lbs. 10 $236.15 9-7074-274 2.74 23.75 1050 in-lbs. 28 $398.40
9-7073-125 1.25 10.9 475 in-lbs. 13.5 $246.50 9-7074-330 3.30 28.5 1275 in-lbs. 33 $434.65
9-7073-150 1.50 13 575 in-lbs. 16 $256.45 9-7074-380 3.80 33 1450 in-lbs. 38 $434.65
9-7073-180 1.80 15.5 700 in-lbs. 20 $266.45 9-7074-520 5.20 45 2000 in-lbs. 65 $581.85
Compact, Hi-Torque Hydraulic Motors
• Brand New, DYNAMIC BMM series hydraulic SPECIFICATIONS bolt ¼-28 drilled/tapped
• Reversible rotation on 1.77˝ B.C. or 2 Bolt on
motor. Compact frame with Rotortorc gear 3.15˝ B.C.
set to provide highly efficient low speed high • Ports SAE 6, Case Drain
SAE 3 • Size 3 bolt mount 43/4˝ x
torque output for limited space applications.
Can be used in parallel or series hydraulic • Shaft 5/8˝ diam. x 15/16˝ w/ 23/8˝ diam.
keyway • Size 2 bolt mount 415/16˝ x
systems
• Mount Choose between 3 315/16 x 21/2˝
BMPH Series
• Brand new DYNAMIC BMPH series hydraulic motors. Gerotor
power element. Interchangeable with the following motor lines:
Char-Lynn H, Danfoss DH, White RS, Parker/Ross MG/TB.
SPECIFICATIONS FOR BMPH SERIES
• Reversible rotation • Shaft 1˝ x 1.57˝ diam. 1/4˝woodruff key
• Ports 1/2˝ NPT • SAE 4 case drain
BMRS Series
• Brand new DYNAMIC BMRS series hydraulic motors. Gerolor
power element. Interchangeable with the following motor lines:
Char-Lynn S, Danfoss DS, White RS, Parker/Ross MG/TB.
SPECIFICATIONS FOR BMRS SERIES
• Reversible rotation • Shaft 1˝ x 1.57˝ diam. 1/4˝woodruff key
• Ports SAE 10 • SAE 4 case drain
BMSY Series
• Brand new DYNAMIC BMSY series hydraulic motors. Gerolor power element. Tapered roller
bearings on output shaft for high axial and radial load capacity. Interchangeable with the following
motor lines: Char-Lynn 2000, Danfoss OMS/OMSS, White RE/DH, Parker/Ross MB/TF.
SPECIFICATIONS FOR BMS SERIES
• Reversible rotation • Mount 2 bolt SAE A • Woodruff keyed shafts in sizes shown
• Ports SAE 10 • SAE 4 case drain
1˝ x 1.64˝ Shaft 11/4˝ x 1.89˝ Shaft PSI Torque in. lbs. RPM GPM
ITEM ITEM Displ. Cont. Int. Cont. Int. Cont. Int. Cont. Int. Size Shpg. Price
9-7080-80 9-7081-80 4.92 2973 3265 1991 2212 800 988 17.1 21.1 65/8˝ x 53/16˝ x 41/16˝ 26 lbs. $285.30
9-7080-100 9-7081-100 6.15 2973 3265 2566 2832 748 900 19.8 23.7 63/4˝ x 53/16˝ x 41/16˝ 26 lbs. $289.45
9-7080-125 9-7081-125 7.63 2973 3265 3230 3240 600 720 19.8 23.7 7˝ x 53/16˝ x 41/16˝ 27 lbs. $292.40
9-7080-160 9-7081-160 9.39 3045 3262 4292 4778 470 560 19.8 23.7 71/4˝ x 53/16˝ x 41/16˝ 28 lbs. $295.35
9-7080-200 9-7081-200 11.8 3045 3265 5185 5707 375 450 19.8 23.7 79/16˝ x 53/16˝ x 41/16˝ 29 lbs. $298.25
9-7080-250 9-7081-250 14.8 2900 3265 6265 7142 300 360 19.8 23.7 8˝ x 53/16˝ x 41/16˝ 31 lbs. $310.45
9-7080-315 9-7081-315 18.9 2900 3265 7787 8495 240 280 19.8 23.7 87/16˝ x 53/16˝ x 41/16˝ 31 lbs. $335.20
9-7080-375 9-7081-375 24.0 2320 2563 7786 8495 185 225 19.8 23.7 815/16˝ x 53/16˝ x 41/16˝ 32 lbs. $359.55
9-7080-475 9-7081-475 28.9 2030 2175 8053 8495 155 185 19.8 23.7 93/8” x 513/16” x 41/16” 34 lbs. $359.55
California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov Char-Lynn Hydraulic Motors 81
• Brand new CHAR-LYNN “J” Series. Use on machine tools, augers, drilling/tapping
machines, conveyors, sweepers, fans, etc. Compact size fits almost anywhere.
SPECIFICATIONS
• Rotation reversible • Shaft 5/8˝ diam. x 13/8˝ w/ keyway • Size 23/8˝ x 47/8˝
• Ports SAE 6; Case drain SAE 3 • Mount 5 bolts on 1.775˝ diam. BC, 1.241˝ diam. pilot • Shpg. 7 lbs.
H Series
• Brand new CHAR-LYNN H series hydraulic motors. Gerotor
power element. Interchangeable with the following motor lines:
Dynamic BMPH, Danfoss DH, White RS, Parker/Ross MG/TB.
SPECIFICATIONS FOR H SERIES
• Reversible rotation • Shaft 1˝ diam. woodruff keyed
• Ports 1/2˝ NPT
2 Bolt Mount 4 Bolt Mount PSI Torque in. lbs. RPM GPM
Item # Price Item # Price Displ. Cont. Int. Cont. Int. Cont. Int. Cont.
Int. Size Shpg.
981-1025 $321.05 981-1001 $295.20 2.8 1800 2400 650 876 969 1127 12 14 51/4˝ x 35/16˝ x 35/16˝ 13 lbs.
981-1026 $311.50 981-1002 $303.35 4.5 1800 2400 1044 1401 760 904 15 18 53/8˝ x 35/16˝ x 35/16˝ 13 lbs.
981-1027 $320.50 981-1003 $312.30 5.9 1800 2400 1368 1829 585 701 15 18 51/2˝ x 35/16˝ x 35/16˝ 14 lbs.
981-1028 $369.40 981-1004 $361.25 9.7 1650 2250 2059 2824 353 471 15 20 513/16˝ x 35/16˝ x 35/16˝ 15 lbs.
981-1029 $384.90 981-1005 $376.75 11.3 1600 2150 2343 3151 304 405 15 20 6˝ x 35/16˝ x 35/16˝ 15 lbs.
981-1030 $379.20 981-1006 $371.05 14.1 1450 2000 2669 3671 243 324 15 20 61/4˝ x 35/16˝ x 35/16˝ 16 lbs.
981-1031 $400.40 981-1007 $392.25 17.9 1350 1800 3110 4121 192 256 15 20 69/16˝ x 35/16˝ x 35/16˝ 16 lbs.
981-1032 $437.05 981-1008 $428.90 22.6 1250 1500 3604 4283 152 202 15 20 7˝ x 35/16˝ x 35/16˝ 16 lbs.
• Brand new CHAR-LYNN 2000 series hydraulic motors. Geroler power element. Tapered
roller bearings on output shaft for high axial and radial load capacity. Interchangeable with the
following motor lines: Dynamic BMS, Danfoss OMS/OMSS, White RE/DH, Parker/Ross MB/TF.
SPECIFICATIONS FOR 2000 SERIES
• Reversible rotation • Mount 2 bolt SAE A • 1˝ dia. shafts woodruff keyed
• Ports SAE 12 • SAE 4 case drain • 11/4˝ dia. shafts straight keyed
• Brand new, HORIZON KSP1 Series flush face quick coupler. Includes body and tip. Used on skid-steer loaders, construction and
agricultural equipment. Plated steel construction. Interchangeable with other brands that conform to ISO 16028.Temp. range -25° C
to 125° C. Pressure: Working 3000 PSI max., Burst 12000 PSI
Complete Coupler Body Only Extra Tip Dust Cap Dust Plug
ITEM Body Size Ports GPM Shpg. Price ITEM Price ITEM Price ITEM Price ITEM Price
9-12275 1/4˝ 1/4˝ NPT 3.17 1 lbs. $26.95 9-12275-B $16.20 9-12275-T $7.30 9-12275-C $1.75 9-12275-P $1.75
9-12276 3/8˝ 3/8˝ NPT 6.O7 1.5 lbs. $31.95 9-12276-B $18.70 9-12276-T $8.80 9-12276-C $1.85 9-12276-P $1.90
9-8288 1/2˝ 1/2˝ NPT 11.9 3 lbs. $38.95 9-8288-B $21.60 9-8288-T $10.60 9-8288-C $2.00 9-8288-P $2.05
9-8313 3/4˝ 3/4˝ NPT 26.4 4 lbs. $63.95 9-8313-B $43.45 9-8313-T $23.95 9-8313-C $2.30 9-8313-P $2.25
9-8720 1˝ 1˝ NPT 49.9 6 lbs. $89.95 9-8720-B $62.80 9-8720-T $34.15 9-8720-C $3.25 9-8720-P $3.00
• Brand new, HORIZON KST Series thread-to-connect coupling. Includes body and tip. Thread-to-connect design can be connected
under pressure, with little or no spillage. Interchangeable half-for-half with the following: Parker 6100, Perfecting W, Faster FB,
Safeway S51, Snaptite 78, Tomco A51 And Aeroquip 5100. Pressure: working 3000 PSI max., burst 9000 PSI.
Complete Coupler Body Only Extra Tip Dust Cap Dust Plug
ITEM Body Size Ports GPM Shpg. Price ITEM Price ITEM Price ITEM Price ITEM Price
9-12277 3/4˝ 3/4˝ NPT 16.3 3 lbs. $51.95 9-12277-B $27.95 9-12277-T $27.95 9-12277-C $7.90 9-12277-P $7.80
9-8314 1˝ 1˝ NPT 42.2 5 lbs. $64.95 9-8314-B $35.80 9-8314-T $32.75 9-8314-C $12.80 9-8314-P $11.65
9-12278 11/4˝ 11/4˝ NPT 58.1 5 lbs. $87.95 9-12278-B $50.40 9-12278-T $48.70 9-12278-C $
13.00 9-12278-P $12.40
9-12279 11/2˝ 11/2˝ NPT 79 7 lbs. $124.95 9-12279-B $68.60 9-12279-T $74.80 9-12279-C $
17.00 9-12279-P $15.10
Ports NPT
ITEM Model Capacity Return/Filler Drain Size Shpg. Price
9-7948 SMR7S 7 1˝ (3) 3/4˝ (1) 153/4˝ x 147/8˝ x 113/4˝ 43 lbs. $168.25
Side Mount
• Brand new BUYERS welded side mount, heavy duty steel reservoirs. Features include black
powder coated steel construction, welded side mount brackets, oil level temperature gauge,
magnetic drain plug, internal baffle and chrome plated breather cap with filler basket strainer.
9-7949 9-7952
Ports NPT Wall
ITEM Model Capacity Suction Return Drain Thickness Size Shpg. Price
9-7949 SMR15S 11 2˝ (2) 11/4˝ (2) 3/4˝ (1) 13 gauge 159/16˝ x 131/2˝ x 171/2˝ 59 lbs. $241.15
9-7950 SMR25S 18 2˝ (2) 11/4˝ (2) 3/4˝ (1) 13 gauge 20˝ x 1413/16˝ x 201/16˝ 71 lbs. $257.35
9-7950-F10 SMR25S 18 2˝ (2) 1˝ (1) 3/4˝ (1) 13 gauge 243/8˝ x 24˝ x 17 76 lbs. $353.70
9-7951 * SMR30S 30 2˝ (2) 11/4˝ (2) 3/4˝ (1) 13 gauge 243/8˝ x 16˝ x 22˝ 92 lbs. $325.95
1˝ (1)
9-7952 SMR37S 37 2˝ (1) 11/4˝ (1) 3/4˝ (1) 12 gauge 231/16˝ x 171/4˝ x 231/16˝ 107 lbs. $426.50
1/2˝ (1)
9-8927 BH36SF10 30 2˝ (2) 1˝ (1) 3/4˝ (1) 12 gauge 46˝ x 91/2˝ x 301/2 210 lbs. $809.50
* Also has accessory port 1/4˝ NPT
Base Mount
• Brand new BUYERS base mount, heavy duty 12 gauge steel reservoirs. Features include
black powder coated steel construction, welded base brackets with mounting kit, oil level
temperature gauge, magnetic drain plug, internal baffle and chrome plated breather cap
with filler basket strainer.
9-7953 9-7954
Ports NPT
ITEM Model Capacity Suction Return Drain Size Shpg. Price
9-7953 UR50S 50 2˝ (1) 11/4˝ (1) 3/4˝ (1) 34˝ x 143/4˝ x 251/2˝ 157 lbs. $432.15
9-7954 UR70S 67.5 2˝ (1) 11/4˝ (1) 3/4˝ (1) 491/4˝ x 143/4˝ x 257/16˝ 227 lbs. $583.30
SPECIFICATIONS
• Pressure 250 PSI max.
• Temperature 250° F max.
• Construction Aluminum
Heat Removed
Model Flow based on 50 Deg F Port Overall Overall Overall Shpg.
ITEM Number GPM *ETD. (BTU/HR) Size Height Width Depth Weight Price
9-12677-8 C8 17 14603 SAE 12 6.57 19.15 1.77 15 lbs. $207.10
9-12677-12 C12 30 20208 SAE 12 11.61 13.78 2.56 20 lbs. $278.85
9-12677-14 C14 30 18417 SAE 12 10.88 19.15 1.77 19 lbs. $268.95
9-12677-18 C18 50 23644 SAE 16 13.47 15.75 2.56 23 lbs. $268.95
9-12677-20 C20 30 20275 SAE 12 15.17 19.15 1.77 23 lbs. $290.40
9-12677-32 C32 80 29070 SAE 20 18.31 19.68 2.56 32 lbs. $330.85
9-12677-48 C48 80 32559 SAE 20 22 23.62 2.56 46 lbs. $529.65
9-12677-66 C66 80 35294 SAE 20 25.74 27.56 2.56 55 lbs. $676.50
9-12677-82 C82 125 37459 SAE 24 27.6 31.5 2.56 70 lbs. $836.55
9-12677-120 C120 125 40449 SAE 24 38.66 31.5 2.56 94 lbs. $1252.35
* ETD - Entering Temperature Difference
SPECIFICATIONS
• Pressure 250 PSI max.
• Temperature 250° F max.
• Construction Aluminum
SPECIFICATIONS
• Pressure 377 PSI max.
• Temperature 250° F max.
• Construction Aluminum cooler and steel shroud/mounting brackets
ITEM 9-8995 wire electric differential pressure indicator. Plastic Seal Pick Tool
$8.95 SPECIFICATIONS
• Application Return Line
(plugged), 1/4˝ NPT (open)
• Temperature 200° F max. ITEM 9-8099
• New, FILTRATION PRODUCTS
ydraulic filter with FPE-15-10N-BLA spin
on element. No bypass.
• Flow 120 GPM
• Pressure 200 PSI max.
• By-pass Valve 25 PSI
• Pressure Switch 22 PSI $1.95
• Ports 11/2˝ NPT ports (also • Mounting Holes 2˝ x 53/8˝ • Brand new, plastic pick tool for
SPECIFICATIONS tapped 3/8-16 removing O-rings and seals to prevent
• Application Return LIne • Filtration 10 Micron 2˝ SAE code 61 4 bolt
flange) • Size 115/16˝ x 5" x 31/2˝ damage to delicate machined surfaces.
• Ports 3/8˝ NPT • Size 31/16˝ dia. x 45/8˝ long
• Shpg. 11/2 lbs. • Gauge Ports 1/8˝ NPT • Shpg. 6 lbs. 51/2˝ overall length. Shpg. 1/10 lb.
• Flow Rate 7 GPM max.
92 Hydraulic Hose & Clamps California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov
48˝ 916-1448 11/2 lbs. $10.20 903-3848 11/2 lbs. $10.85 905-1248 2 lbs. $12.15 • 3/4˝ ID. Rated 300 PSI.
60˝ 916-1460 11/2 lbs. $12.00 903-3860 2 lbs. $12.75 905-1260 2 lbs. $14.20 Shpg. 7 oz./ft.
72˝ 916-1472 13/4 lbs. $13.80 903-3872 2 lbs. $14.65 905-1272 3 lbs. $16.30 ITEM 9-1279 $5.35
PER
FT.
84˝ 916-1484 13/4 lbs. $15.55 903-3884 3 lbs. $16.65 905-1284 3 lbs. $16.85 • 1˝ ID. Rated 250 PSI.
96˝ 916-1496 2 lbs. $17.40 903-3896 4 lbs. $17.00 905-1296 4 lbs. $18.80 Shpg. 10 oz./ft.
PER
108˝ 916-14108 3 lbs. $17.55 903-38108 5 lbs. $18.75 905-12108 5 lbs. $20.70 ITEM 9-1956 $6.75 FT.
120˝ 916-14120 4 lbs. $19.20 903-38120 6 lbs. $20.55 905-12120 6 lbs. $22.60 • 11/4˝ ID. Rated 300 PSI.
144˝ 916-14144 5 lbs. $22.45 903-38144 7 lbs. $24.05 905-12144 7 lbs. $26.50 Shpg. 12 oz./ft.
PER
180˝ 916-14180 6 lbs. $26.90 903-38180 8 lbs. $28.80 905-12180 8 lbs. $31.65 ITEM 9-1957 $8.80 FT.
240˝ 916-14240 8 lbs. $34.90 903-38240 10 lbs. $37.45 905-12240 11 lbs. $41.10 • 11/2˝ ID. Rated 300 PSI.
300˝ 916-14300 9 lbs. $42.95 903-38300 12 lbs. $46.10 905-12300 14 lbs. $50.50 Shpg. 16 oz./ft.
Two Wire Braid Hose
3/8˝ ID 1/2˝ ID 3/4˝ ID 1˝ ID
• 100R16, 3/8˝ NPT solid male fittings • 100R16, 1/2˝ NPT solid male fittings • 100R16, 3/4˝ NPT solid male fittings • 100R17, 1˝ NPT solid male fittings
• Working/burst 4800/19,200 PSI • Working/burst 4000/16,000 PSI • Working/burst 3100/12,400 PSI • Working/burst 3000/12,000 PSI
Lgth. ITEM Shpg. Price ITEM Shpg. Price ITEM Shpg. Price ITEM Shpg. Price
12˝ 918-3212 1 lb. $ 5.45 917-2212 1 lb. $ 6.55 9-078-12 11/2 lbs. $11.50 919-2212 2 lbs. $ 17.40
18˝ 918-3218 1 lb. $ 6.60 917-2218 1 lb. $ 7.80 9-078-18 13/4 lbs. $13.55 919-2218 2 lbs. $ 20.75
24˝ 918-3224 11/2 lbs. $ 7.80 917-2224 11/4 lbs. $ 9.05 9-078-24 3 lbs. $15.70 919-2224 3 lbs. $ 24.00
30˝ 918-3230 11/2 lbs. $ 8.95 917-2230 11/2 lbs. $10.30 9-078-30 3 lbs. $17.80 919-2230 4 lbs. $ 27.30
36˝ 918-3236 2 lbs. $10.10 917-2236 11/2 lbs. $11.55 9-078-36 3 lbs. $18.25 919-2236 4 lbs. $ 30.55
48˝ 918-3248 3 lbs. $12.45 917-2248 2 lbs. $14.15 9-078-48 4 lbs. $22.10 919-2248 5 lbs. $ 37.15
60˝ 918-3260 3 lbs. $14.80 917-2260 2 lbs. $16.65 9-078-60 5 lbs. $25.90 919-2260 6 lbs. $ 43.70
72˝ 918-3272 3 lbs. $17.15 917-2272 3 lbs. $17.55 9-078-72 6 lbs. $29.75 919-2272 7 lbs. $ 50.25
84˝ 918-3284 3 lbs. $17.85 917-2284 3 lbs. $19.85 9-078-84 7 lbs. $33.60 919-2284 8 lbs. $ 56.80
96˝ 918-3296 5 lbs. $20.05 917-2296 4 lbs. $22.15 9-078-96 7 lbs. $37.45 919-2296 9 lbs. $ 63.40
108˝ 918-32108 6 lbs. $22.15 917-22108 5 lbs. $24.40 9-078-108 8 lbs. $41.30 919-22108 10 lbs. $ 69.95
120˝ 918-32120 7 lbs. $24.30 917-22120 6 lbs. $26.75 9-078-120 9 lbs. $45.15 919-22120 11 lbs. $ 76.50
144˝ 918-32144 8 lbs. $28.60 917-22144 7 lbs. $31.35 9-078-144 10 lbs. $52.85 919-22144 13 lbs. $ 86.95
180˝ 918-32180 10 lbs. $34.30 917-22180 8 lbs. $37.50 9-078-180 14 lbs. $63.15 919-22180 16 lbs. $106.00
240˝ 918-32240 13 lbs. $44.80 917-22240 11 lbs. $48.75 9-078-240 17 lbs. $82.00 919-22240 21 lbs. $138.95
300˝ 918-32300 15 lbs. $55.30 917-22300 14 lbs. $60.05 9-078-300 20 lbs. $97.80 919-22300 26 lbs. $169.65
Hydraulic Hose Clamps ▲
!
• Brand new, hydraulic hose mounting clamp. Weld onto equipment to route hoses. Steel
top and bottom plates with polypropylene clamp set. Single hose styles (dual style on next
page). See chart below for specifications to match your requirements.
Surplus Center Hose
ITEM Type Clamp Opening Hose Size Item Number Prefix Size Shpg. Price
9-A2-135 Single 13.5 mm (0.53˝) 1/4˝ Single Wire 916 1.89˝ x 1.18˝ x 1.54˝ 1/2 lb. $2.45
9-A2-14 Single 14 mm (0.55˝) 1/4˝ Two Wire 920, 921 1.89˝ x 1.18˝ x 1.54˝ 1/2 lb. $2.45
9-A2-172 Single 17.2 mm (0.67˝) 3/8˝ Single Wire 903 1.89˝ x 1.18˝ x 1.54˝ 1/2 lb. $2.45
9-A2-18 Single 18 mm (0.71˝) 3/8˝ Two Wire 918, 930, 931 1.89˝ x 1.18˝ x 1.54˝ 1/2 lb. $2.45
9-A3-20 Single 20 mm (0.79˝) 1/2˝ Single Wire 905 2.17˝ x 1.18˝ x 1.61˝ 1/2 lb. $2.75
9-A3-213 Single 21.3 mm (0.84˝) 1/2˝ Two Wire 917, 940, 941 2.17˝ x 1.18˝ x 1.61˝ 1/2 lb. $2.75
9-A4-28 Single 28 mm (1.10˝) 3/4˝ Single Wire 9-078 2.44˝ x 1.18˝ x 1.89˝ 3/4 lb. $3.25
9-A4-30 Single 30 mm (1.18˝) 3/4˝ Two Wire 950, 951 2.44˝ x 1.18˝ x 1.89˝ 3/4 lb. $3.25
9-A5-38 Single 38 mm (1.50˝) 1˝ Two Wire 919 2.91˝ x 1.18˝ x 2.52˝ 3/4 lb. $3.75
California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov Hydraulic Hose & Hose Clamps 93
JIC Hydraulic Hose Lengths
• Brand new. Top quality, 2 wire braid with JIC female fittings each end.
Length
Two Wire Braid Hose
1/4˝ ID 3/8˝ ID
• 100R16, working/burst 5800/23,200 PSI • 100R16, working/burst 4800/19,200 PSI
JIC 4F Swivel Fittings JIC 6F Swivel Fittings JIC 6F Swivel Fittings JIC 8F Swivel Fittings
Lgth. ITEM Shpg. Price ITEM Shpg. Price ITEM Shpg. Price ITEM Shpg. Price
12˝ 920-2212 1 lb. $ 7.40 921-2212 1 lb. $ 7.50 930-2212 1 lb. $ 7.90 931-2212 1 lb. $ 8.80
18˝ 920-2218 1 lb. $ 8.60 921-2218 1 lb. $ 8.60 930-2218 1 lb. $ 9.15 931-2218 1 lb. $10.05
24˝ 920-2224 1 lb. $ 9.70 921-2224 1 lb. $ 9.70 930-2224 11/2 lbs. $10.35 931-2224 11/2 lbs. $11.25
30˝ 920-2230 11/4 lbs. $10.80 921-2230 11/4 lbs. $10.80 930-2230 11/2 lbs. $11.55 931-2230 11/2 lbs. $12.50
36˝ 920-2236 11/4 lbs. $11.90 921-2236 11/4 lbs. $11.90 930-2236 2 lbs. $12.80 931-2236 2 lbs. $13.70
48˝ 920-2248 11/2 lbs. $14.15 921-2248 11/2 lbs. $14.15 930-2248 3 lbs. $15.25 931-2248 3 lbs. $16.20
60˝ 920-2260 11/2 lbs. $16.30 921-2260 11/2 lbs. $16.30 930-2260 3 lbs. $17.70 931-2260 3 lbs. $17.05
72˝ 920-2272 13/4 lbs. $17.00 921-2272 13/4 lbs. $17.00 930-2272 3 lbs. $18.50 931-2272 3 lbs. $19.30
84˝ 920-2284 13/4 lbs. $19.00 921-2284 13/4 lbs. $19.00 930-2284 3 lbs. $20.70 931-2284 3 lbs. $21.50
96˝ 920-2296 2 lbs. $21.00 921-2296 2 lbs. $21.00 930-2296 5 lbs. $22.95 931-2296 5 lbs. $23.75
108˝ 920-22108 3 lbs. $23.05 921-22108 3 lbs. $23.05 930-22108 6 lbs. $25.20 931-22108 6 lbs. $26.05
120˝ 920-22120 4 lbs. $25.10 921-22120 4 lbs. $25.10 930-22120 7 lbs. $27.45 931-22120 7 lbs. $28.30
144˝ 920-22144 5 lbs. $29.10 921-22144 5 lbs. $29.10 930-22144 8 lbs. $31.95 931-22144 8 lbs. $32.75
180˝ 920-22180 6 lbs. $35.20 921-22180 6 lbs. $35.20 930-22180 10 lbs. $38.65 931-22180 10 lbs. $39.50
240˝ 920-22240 8 lbs. $45.35 921-22240 8 lbs. $45.35 930-22240 13 lbs. $49.90 931-22240 13 lbs. $50.75
300˝ 920-22300 9 lbs. $55.45 921-22300 9 lbs. $55.45 930-22300 15 lbs. $61.10 931-22300 15 lbs. $61.95
1/2˝ ID 3/4˝ ID
• 100R16, working/burst 4000/16,000 PSI • 100R17, working/burst 3000/12,000 PSI
JIC 8F Swivel Fittings JIC 10F Swivel Fittings JIC 10F Swivel Fittings JIC 12F Swivel Fittings
Lgth. ITEM Shpg. Price ITEM Shpg. Price ITEM Shpg. Price ITEM Shpg. Price
12˝ 940-2212 1 lb. $10.70 941-2212 1 lb. $11.55 950-2212 2 lbs. $16.90 951-2212 2 lbs. $17.30
18˝ 940-2218 1 lb. $12.00 941-2218 1 lb. $12.95 950-2218 2 lbs. $17.55 951-2218 2 lbs. $17.90
24˝ 940-2224 11/4 lbs. $13.35 941-2224 11/4 lbs. $14.25 950-2224 3 lbs. $19.60 951-2224 3 lbs. $20.00
30˝ 940-2230 11/2 lbs. $14.70 941-2230 11/2 lbs. $15.55 950-2230 3 lbs. $21.70 951-2230 3 lbs. $22.10
36˝ 940-2236 11/2 lbs. $16.00 941-2236 11/2 lbs. $16.90 950-2236 3 lbs. $23.75 951-2236 3 lbs. $24.10
48˝ 940-2248 2 lbs. $17.10 941-2248 2 lbs. $17.90 950-2248 4 lbs. $27.90 951-2248 4 lbs. $28.30
60˝ 940-2260 2 lbs. $19.55 941-2260 2 lbs. $20.35 950-2260 5 lbs. $32.05 951-2260 5 lbs. $32.40
72˝ 940-2272 3 lbs. $21.95 941-2272 3 lbs. $22.80 950-2272 6 lbs. $36.20 951-2272 6 lbs. $36.55
84˝ 940-2284 3 lbs. $24.40 941-2284 3 lbs. $25.25 950-2284 7 lbs. $40.35 951-2284 7 lbs. $40.70
96˝ 940-2296 4 lbs. $26.85 941-2296 4 lbs. $27.70 950-2296 8 lbs. $44.45 951-2296 8 lbs. $44.85
108˝ 940-22108 5 lbs. $29.30 941-22108 5 lbs. $30.10 950-22108 9 lbs. $48.65 951-22108 9 lbs. $49.00
120˝ 940-22120 6 lbs. $31.70 941-22120 6 lbs. $32.55 950-22120 10 lbs. $52.75 951-22120 10 lbs. $53.10
144˝ 940-22144 7 lbs. $36.60 941-22144 7 lbs. $37.40 950-22144 11 lbs. $61.05 951-22144 11 lbs. $61.40
180˝ 940-22180 8 lbs. $43.90 941-22180 8 lbs. $44.70 950-22180 15 lbs. $73.45 951-22180 15 lbs. $73.85
240˝ 940-22240 11 lbs. $56.05 941-22240 11 lbs. $56.95 950-22240 19 lbs. $91.35 951-22240 19 lbs. $91.70
300˝ 940-22300 14 lbs. $68.25 941-22300 14 lbs. $69.05 950-22300 22 lbs. $111.40 951-22300 22 lbs. $111.80
Hydraulic Hose Clamps ▲
!
• Brand new, hydraulic hose mounting clamp. Weld onto equipment to route hoses. Steel
top and bottom plates with polypropylene clamp set. Dual hose styles (single style on
previous page). See chart below for specifications to match your requirements.
Refrigerant Gauges
• New pressure gauges calibrated to display the temperature and corresponding
pressure of compressed refrigerants. All have white faces. Panel mount gauges include
a mounting bracket. All are dry gauges. Shpg. 1/2 lb.
ITEM Diam. PSI Vac. Compatible Refrigerants & Their Ranges Connect Case Price
21-1583-AH 21/2˝ 500 R502: -40 to 167 F, R22: -40 to 173 F, R12: -20 to 218 F 1/8˝ L P $5.95
21-1583-AP 21/2˝ 500 R502: -40 to 167 F, R22: -40 to 173 F, R12: -20 to 218 F 1/8˝ L S $5.95
21-1637-CF 21/2˝ 500 30˝ R410A: -40 to 90 F, R12: 0 to 160 F, R134a: 0 to 150 F, R22: -30 to 120 F 1/8˝ P M $5.95
21-1637-CG 21/2˝ 500 30˝ R410A: -40 to 90 F, R12: 0 to 160 F, R134a: 0 to 150 F, R22: -30 to 120 F 1/8˝ L P $5.95
21-1637-CH 21/2˝ 800 — R410A: 20 to 150 F, R12: 70 to 200 F, R134a: 60 to 190 F, R22: 30 to 160 F 1/8˝ L P $5.95
21-1637-CK 21/2˝ 3.4 MPa -0.1 MPa R410A: -40 to 30 C, R12: -5 to 70 C, R134a: 0 to 65 C, R22: -20 to 45 C 1/8˝ P M $5.95
21-1637-CL 21/2˝ 3.4 MPa -0.1 MPa R410A: -40 to 30 C, R12: -5 to 70 C, R134a: 0 to 65 C, R22: -20 to 45 C 1/8˝ L P $5.95
& 800-488-3407 California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov Miscellaneous Bargains 105
50 Person 1˝ NPT PVC 1/2˝ NPT Breather Dipstick
First Aid Ball Valve ITEM 9-8892-S
Kit ▲! ITEM 20-1639
$3.99
ITEM 1-5188 $4.95 • New screw-in breather/dipstick made
for use with hydraulic reservoirs. 33/4˝
• New, SH Model DN25 compact ball
$15.95 valve. PVC construction.
SPECIFICATIONS • Temperature 73°
from bottom of threads to end of dipstick.
“Add’’ mark 1/2˝ from end, “Full’’ at 21/2˝
• Brand new, 50
person industrial first aid kit. • Ports 1˝ NPT female • Size 37/8˝ x 17/8˝ x 31/2˝ from end.
• Pressure 150 PSI • Shpg. 1/2 lb. SPECIFICATIONS
Meets and exceeds ANSI standard
• Overall size 11/2˝ dia. x • Threads 1/2˝ NPT
Z308.1-2003 and OSHA standard
1910.151(B).
3/4˝ NPT PVC 51/4˝ long • Shpg. 1/4 lb
SPECIFICATIONS Ball Valve
• 50 1˝ x 3˝ bandages • 4 exam gloves
ITEM 20-1638 131/2˝ Steering
• 30 3˝ x 3/4˝ bandages
• 20 13/4˝ x 3/8˝ bandages
• 1 instant cold pack
• 1 set of tweezers $3.95 Wheel
• 3 knuckle bandages • 10 burn/first aid creams • New, SH compact ball valve. PVC ITEM 1-5052
• 3 fingertip bandages
• 1 triangular bandage
• 10 sting relief pads
• 30 alcohol pads
SPECIFICATIONS • Temperature 73°
• Ports 3/4˝ NPT male • Size 27/8˝ x 13/8˝ x 21/2˝ $12.95
• New take-outs. Plastic three-spoke
• 3 butterfly closures • 20 antiseptic towlettes • Pressure 150 PSI • Shpg. 1/4 lb.
• 2 tape rolls • 4 finger splints/tongue steering wheel with cushioned grip and
die-cast metal hub insert. Includes center
• 1 5˝ x 9˝ trauma pad depressors
• 20 cotton tip applicators
1/2˝ NPT Brass cap. No horn.
• 1 eye pad
• 1 eye wash • 1 filtration mask Ball Valve SPECIFICATIONS
• Diameter 131/2˝ O.D.
measures 3/4˝ at largest O.D.
• Dish Depth 15/8˝
• 4 4˝ x 4˝ gauze pads • 1 first aid guide
• Color Black • Cap Opening 29/16˝ I.D.
• 4 3˝ x 3˝ gauze pads • 1 plastic case ITEM 20-1661 • Hub 17mm 40 spline, • Size 131/2˝ O.D. x 4˝
$1.49
• 4 2˝ x 2˝ gauze pads • Overall Size 101/4˝ x 97/8˝ tapered smooth portion • Shpg. 4 lbs.
• 1 2˝ wide gauze roll x 31/8˝
• Shpg. 3 lbs.
• 1 4˝ wide gauze roll • New brass ball valve. 1/4˝ orifice. Stainless
ball and teflon seal. Compact design. Use 5000 ft.
for tank drains, etc. Stranded
120 VAC SPECIFICATIONS • Size 1˝ dia. x 11/2˝
Wire
Pull • Ports 1/2˝ NPT male/female • Shpg 1/2 lb
ITEM 1-2073
Solenoid 8˝ Sliding Door
ITEM 11-3614 Tracks Pair $39.99
• New DEARBORN. Un-insulated electric
$5.95 ITEM 1-5043
ground wire. Stranded copper, fused tin
conductor. 22 gauge. 7/30 construction.
• New, GUARDIAN ELECTRIC model
16-C-120 laminated solenoid. Spade
terminals.
$7.99 Use for ground wire on circuit boards or
as picture frame wire, tie wire, etc.
SPECIFICATIONS • 43 Oz.-1/4˝
• New, HETTICH part #41371 pair of Shpg. 14 lbs.
• 30 Oz.- 1/2˝ plated steel slides. Built for use on cab-
• Voltage 120 AC
• Coil Resistance 85 ohms • 18 Oz.-3/4˝ inet doors that slide back when open.
Friction detent at end of travel. Ball bear-
6 ft. HDMI
• 8 Oz.- 1˝
• Power Consumption 20
watts • Plunger Clevis w/ 1/8˝ pin ings. Does not included door hinges or Cable
• Duty Continuous holes, 0.4˝ between ears mounting hardware.
• Mount 8 holes in base SPECIFICATIONS ITEM 11-3463
$3.99
• Travel 1˝ maximum
• Holding Force 70 Oz. • Overall size 21/4˝ x 13/8˝ x • Travel 8˝ • Overall length 12˝
• Pull Force- Stroke Rating 11/2˝ (plunger retracted) • Stages one • Mount Sliding Plate 31/8˝ x
31/2˝ 6 countersunk holes • New, HDMI cable.
• 68 Oz.- 1/8˝ • Shpg. 3/4 lb. • Weight capacity 30 lb. /
pair • Shpg. 3 lbs. SPECIFICATIONS
• Length 6 ft. • End 1 HDMI A Male
• Shpg. 1/4 lb. • End 2 HDMI A Male
6 lbs.
8 lbs. 13.65 14.51 15.64 16.65 17.14 18.05 22.39 27.16 29.97 36.96 47.90 53.68 28.96 33.33 39.01 52.68 71.78 77.20 48.94 67.00 104.54 122.38 127.81 137.64
10 lbs. 14.08 14.79 15.94 17.16 17.76 19.62 24.31 28.94 32.87 40.95 53.47 60.79 30.41 36.58 44.62 59.73 82.75 91.17 49.90 67.90 112.56 125.12 130.89 141.37
12 lbs. 14.76 15.58 16.36 17.46 18.83 21.78 26.51 32.12 35.82 44.97 59.88 66.68 34.15 40.29 48.77 66.85 95.29 104.26 58.50 79.93 135.74 159.12 166.78 177.56
14 lbs. 15.25 15.98 16.67 18.11 20.30 24.40 28.31 35.10 38.53 48.76 65.77 73.68 37.79 44.08 53.44 74.37 107.09 114.39 60.15 83.17 144.15 165.27 167.68 186.73
16 lbs. 15.58 16.66 17.12 18.93 21.88 26.02 29.85 36.31 41.12 51.12 71.85 80.52 39.85 46.31 57.93 79.42 117.04 125.12 62.59 91.73 156.55 184.40 189.62 204.96
18 lbs. 15.81 17.16 17.44 20.19 23.54 27.95 30.89 36.93 43.91 55.60 76.96 87.22 42.15 48.97 62.26 85.71 126.96 137.15 67.98 94.93 165.99 187.21 192.83 207.48
20 lbs. 16.31 18.05 18.38 21.82 24.97 29.81 32.31 39.34 46.96 59.54 81.94 93.43 44.97 52.14 66.09 92.95 135.87 148.00 68.71 95.72 170.77 187.67 194.32 208.99
22 lbs. 16.88 18.81 19.66 22.75 26.83 31.87 34.26 42.78 49.61 63.11 87.17 99.92 48.15 56.35 70.15 98.49 144.95 158.58 74.57 105.16 185.76 209.17 212.55 237.11
24 lbs. 17.32 19.79 20.77 23.99 28.95 33.58 35.97 43.88 52.37 66.71 92.48 106.35 50.23 59.59 74.67 104.91 155.31 169.48 76.83 106.12 193.81 217.93 226.08 245.82
26 lbs. 18.20 20.57 21.75 25.29 30.41 36.25 38.44 46.58 55.63 70.77 97.52 113.48 53.11 62.71 78.64 111.75 165.50 181.54 81.65 114.60 211.60 233.46 245.75 252.82
28 lbs. 18.86 21.43 23.03 27.15 32.93 38.39 40.58 49.18 58.76 74.68 104.39 120.69 56.27 66.36 82.27 118.17 175.21 192.19 83.57 115.81 222.00 241.24 250.89 264.53
30 lbs. 19.37 22.26 24.41 28.46 34.27 39.73 42.24 50.03 61.98 78.73 110.65 127.03 57.80 69.21 87.33 124.66 184.58 202.08 84.31 116.58 227.62 244.01 252.22 272.30
32 lbs. 19.76 22.70 24.65 28.55 35.20 40.76 43.83 53.51 65.22 82.37 116.53 134.45 58.24 72.86 91.98 130.33 194.09 211.97 89.71 122.46 241.85 256.18 275.39 283.67
34 lbs. 20.14 23.45 26.36 30.72 37.32 43.19 45.67 55.31 68.05 86.35 122.71 140.88 64.48 75.93 96.29 137.50 205.04 222.00 93.62 129.78 251.88 274.27 281.06 309.30
36 lbs. 20.73 24.56 27.34 32.38 39.31 45.65 48.00 58.80 71.37 90.33 128.69 147.24 66.64 79.70 100.20 142.90 216.61 234.49 99.29 132.62 262.53 279.99 291.23 312.90
38 lbs. 21.27 25.19 28.39 33.77 40.32 47.62 48.87 59.65 74.44 94.69 133.88 152.22 68.85 81.94 104.99 149.34 227.92 246.73 100.26 142.05 273.04 298.19 310.28 330.40
40 lbs. 21.73 25.94 29.06 34.48 42.07 48.97 50.51 60.18 76.52 97.21 139.80 157.83 71.09 86.07 109.11 155.54 238.50 259.26 100.88 142.79 278.27 299.29 311.47 334.66
42 lbs. 22.09 27.02 30.81 35.68 43.90 51.20 52.46 66.16 81.06 103.02 145.11 164.20 75.46 90.07 112.47 161.56 248.91 272.33 106.59 150.01 291.78 312.40 330.02 339.57
44 lbs. 22.82 27.85 31.85 37.97 46.10 54.04 54.30 68.18 84.43 106.93 150.60 171.19 78.15 92.91 116.59 167.00 259.52 281.95 111.68 160.08 304.39 327.68 341.73 365.74
46 lbs. 23.28 28.01 32.51 38.64 47.55 56.11 56.44 70.02 87.56 110.78 156.58 178.15 80.76 96.09 120.50 170.94 268.55 291.68 118.74 166.72 313.22 339.78 353.13 371.50
48 lbs. 23.38 28.58 33.35 39.87 48.84 57.65 56.73 71.37 90.01 115.06 163.79 183.87 82.59 99.98 124.54 171.92 278.48 301.09 121.61 169.42 314.52 344.89 355.85 379.27
50 lbs. 44.73 49.93 54.70 61.23 70.52 80.09 76.51 91.90 111.15 136.64 185.21 207.86 102.31 119.87 147.82 191.43 307.21 328.46 141.11 189.85 334.03 364.71 376.87 399.59
52 lbs. 44.77 49.98 54.76 61.29 70.54 80.11 80.50 96.73 114.34 142.40 195.40 216.96 108.61 125.45 154.63 206.34 325.35 349.54 155.84 213.96 374.89 400.52 414.81 443.23
54 lbs. 44.79 50.01 54.83 61.58 70.56 80.13 81.91 99.25 117.78 146.04 200.89 225.97 111.53 128.75 158.54 208.11 326.46 359.79 157.67 217.42 385.88 412.50 416.39 468.73
56 lbs. 44.81 50.03 54.88 62.14 70.58 80.15 83.50 101.02 120.53 150.14 203.82 233.34 113.85 129.59 160.14 209.06 340.72 360.68 167.89 231.79 397.48 422.98 436.61 469.59
58 lbs. 45.19 50.41 55.26 63.32 70.60 80.17 84.49 102.43 123.41 154.05 210.16 241.41 114.69 134.84 164.73 220.57 357.24 368.16 169.54 234.75 398.60 433.73 453.10 484.73
60 lbs. 45.79 51.19 56.21 64.70 71.80 80.59 86.02 103.73 125.51 156.00 215.90 246.31 115.53 135.68 170.42 226.50 364.09 383.70 170.37 235.58 400.35 440.78 454.88 497.71
62 lbs. 46.70 53.20 57.06 65.99 72.55 81.79 87.48 109.01 129.19 162.51 223.28 256.33 116.36 136.52 171.27 227.48 369.67 386.96 179.77 249.83 429.98 458.78 474.52 521.41
64 lbs. 47.32 53.79 57.93 66.03 73.68 82.28 89.69 111.84 131.69 166.78 230.17 264.56 122.60 139.15 172.11 232.11 389.92 401.56 188.04 257.70 434.02 472.06 490.90 531.85
66 lbs. 47.90 54.60 57.95 66.12 74.14 82.59 92.43 113.73 134.52 170.40 235.74 271.38 126.72 142.61 174.19 238.19 393.76 402.62 189.25 259.94 452.48 478.33 508.54 548.89
68 lbs. 48.18 55.47 60.00 67.03 74.81 83.22 92.64 115.20 138.94 174.50 241.96 278.75 127.56 145.97 178.77 239.04 396.20 403.47 194.59 274.21 456.89 504.39 510.43 562.99
70 lbs. 48.57 55.84 60.44 68.69 76.10 83.24 93.73 116.60 140.12 177.48 244.11 282.63 128.40 159.88 184.62 258.29 406.12 431.70 195.42 275.04 457.73 506.52 511.36 569.56
75 lbs. 51.92 56.63 62.25 70.57 79.33 88.23 100.51 122.80 149.30 188.32 261.97 297.29 138.22 163.81 186.83 269.72 435.36 446.26 203.11 289.63 482.76 526.82 531.85 604.97
80 lbs. 57.27 62.49 65.66 73.92 82.86 92.98 105.07 126.60 154.45 195.07 270.15 318.32 142.41 168.01 195.89 286.28 472.74 503.90 215.77 308.73 497.76 564.62 581.63 658.48
85 lbs. 61.58 65.73 69.93 76.88 86.38 97.51 108.35 136.42 162.92 207.94 294.57 337.75 156.05 176.03 210.06 300.54 487.29 515.74 227.71 315.77 530.24 604.58 617.55 683.42
90 lbs. 69.04 71.42 75.39 80.91 89.90 101.55 113.72 145.07 171.93 218.16 307.89 353.42 160.24 184.16 214.33 305.02 500.48 524.92 240.43 339.78 574.28 617.52 651.62 732.52
95 lbs. 72.89 75.00 78.28 83.63 93.32 101.86 118.34 149.01 178.90 232.37 318.49 371.73 164.44 188.27 219.08 309.25 505.34 532.80 253.81 355.00 596.26 622.42 666.34 738.89
100 lbs. 78.44 78.92 83.26 87.69 96.96 104.58 126.02 152.62 186.56 243.17 337.61 393.27 170.00 205.00 258.00 354.00 554.56 618.36 266.21 362.35 632.02 687.57 701.71 817.20
105 lbs. 81.15 81.60 85.67 90.54 99.49 106.35 131.34 157.14 196.71 254.83 353.22 411.68 177.30 214.05 269.70 370.50 581.72 652.95 278.53 379.27 662.42 720.76 735.60 856.65
110 lbs. 85.39 85.92 89.24 93.23 102.32 110.05 135.91 162.71 205.09 265.75 369.86 430.16 184.60 223.10 281.40 387.00 608.26 682.90 290.43 396.19 692.83 753.93 769.49 896.30
115 lbs. 88.78 90.02 93.33 96.81 105.73 113.70 141.54 169.01 213.22 276.72 385.70 448.59 191.90 232.15 293.10 403.50 633.50 712.85 302.55 413.11 723.23 787.11 803.37 935.95
120 lbs. 93.33 94.05 97.09 99.84 109.00 117.13 145.00 175.36 221.53 287.08 400.34 467.06 199.20 241.20 304.80 420.00 660.00 742.80 314.65 430.02 753.63 820.29 837.26 975.60
125 lbs. 96.00 96.19 100.36 103.10 112.28 120.56 150.46 181.09 229.16 297.85 415.90 485.55 206.50 250.25 316.50 436.50 686.50 772.75 326.76 446.95 784.04 853.46 871.14 1,015.25
130 lbs. 99.57 99.84 104.70 106.13 115.50 123.92 153.47 187.84 235.34 308.85 431.56 503.96 213.80 259.30 328.20 453.00 713.00 802.70 338.87 463.86 814.43 886.65 905.03 1,054.90
135 lbs. 103.01 104.07 108.00 109.65 118.81 127.31 158.57 193.65 240.90 317.91 447.22 522.44 221.10 268.35 339.90 469.50 739.50 832.65 350.98 480.78 844.83 919.83 938.91 1,094.55
140 lbs. 106.56 107.38 111.87 113.06 122.40 130.79 163.55 200.00 248.93 326.01 462.95 540.86 228.40 277.40 351.60 486.00 766.00 862.60 362.45 497.69 875.23 953.00 972.80 1,134.20
145 lbs. 110.21 112.79 116.94 117.26 125.96 134.72 168.61 204.48 257.01 336.62 478.62 559.35 235.70 286.45 363.30 502.50 792.50 892.55 374.53 514.62 905.64 986.18 1,006.68 1,173.85
150 lbs. 112.67 115.10 121.19 122.82 129.76 138.02 173.52 210.22 264.93 346.62 494.29 577.83 243.00 295.50 375.00 519.00 819.00 922.50 387.31 531.53 936.03 1,019.37 1,040.57 1,213.50
UPS Rates 107
108 Order Form 8 www.surpluscenter.com
Phone 800-488-3407
FAX 402-474-5198
Mail this order form to
1015 West O˝ Street, Lincoln NE 68528
Privacy with Surplus Center
SURPLUS CENTER
We know that you trust us with your personal information, and we take your privacy seriously.
Your information is used for internal purposes, such as confirming and tracking your order,
1015 West O˝ St. • Lincoln, NE 68528 • FAX 402-474-5198
informing you of new products, services and offers, and providing you with information from
and about Surplus Center. We do not sell, rent or exchange your information. For Fast Order Processing Order Toll Free, 24 Hrs., 7 Days A Week
e-mail address_____________________________________________________
Your Name________________________________________________________
800-488-3407
For Customer Service Call Mon-Fri 8:00 am - 5:00 pm CST
Total $
Do you have friends that would enjoy our catalog? Method of Shipment Merchandise
Tell us where to send it. UPS.................................. Add State
UPS 2nd Day.................... Sales Tax* $
Name______________________________________________________________
UPS Next Day..................
USPS Priority Mail............ Shipping Charges $
Street______________________________________________________________
Truck (150 lbs. and over)..
City_________________________________ State________ Zip______________ Total Order $
*Applies to all states having Sales Tax
Name______________________________________________________________
Please don’t write in this space
Street______________________________________________________________
Date
Received
All prices Are In U.S. Dollars
City_________________________________ State________ Zip______________ Amount Thank You For Your Order!
Received
& 800-488-3407 California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov Miscellaneous 109
Rubber Rake Teeth ▲
!
1-4628
Cable Ties
1-4670
Tensile Max. Loop
ITEM Qty. Length Width Strength Dia. Color Features/Model Brand Shpg. Price
1-4644 100 4.7˝ 0.1˝ 18 lbs 1.18˝ Natural CT18-1.18Z JST 1/2 lb. $ .99
1-4672 100 5.5˝ 0.14˝ 40 lbs. 1.38˝ Natural CT40-1.38Z JST 1/2 lb. $ .99
1-4628 1000 5.5˝ 0.1˝ N/A 1.38˝ Natural 954623 — 2 lbs. $5.99
1-4695 25 32˝ 0.375˝ N/A 9˝ Ivory T150L-9A Tyton 1 lb. $7.99
1-4694 25 32˝ 0.31˝ N/A 10˝ Ivory T150L-R-12 Tyton 2 lbs. $5.99
1-4641 25 32˝ 0.31˝ N/A 11˝ Ivory T150LL-9A Tyton 2 lbs. $5.99
Marker Ties
Tensile Max. Loop
ITEM Qty. Length Width Strength Dia. Color Features/Model Brand Shpg. Price
1-4670 100 7.5˝ 0.19˝ 50 lbs. 1.7˝ Natural 1˝ sq. label area, dual straps, MT50-1.88JZ JST 1 lb. $3.99
1-4637-10 100 10.6˝ 0.19˝ 50 lbs. 2.7˝ Natural 1˝ sq. label area, dual straps MT50-2.70JZ JST 1 lb. $3.99
1-4690 100 12.1˝ 0.19˝ 50 lbs. 3˝ Natural 1˝ x 2˝ label area, dual straps, MT50-3.00JZ JST 1 lb. $3.99
1-4638 100 12.1˝ 0.19˝ 50 lbs. 3˝ Natural 1/2˝ x 2˝ label area, MT50-3.00Z JST 1 lb. $4.99
ITEM 4-1832
$213.75
46 CFM, • Brand new, FINI Model MK103.
23 CFM, Four Cylinder Single cylinder, single stage belt drive
Two Cylinder compressor. Aluminum head and
crankcase. Integral cold start valve allows
ITEM 4-1066 ITEM 4-1070 no load starting. Oil sight gauge.
$619.05 $1052.70 SPECIFICATIONS
• One stage, one cylinder • Rotation CCW
SPECIFICATIONS SPECIFICATIONS
• Displ. 46 CFM • Mtg. pattern 91/4˝ x 91/2˝ • Pressure 145 PSI max. • Flywheel 10˝ dia.
• Displ. 23 CFM • Mtg. pattern 8˝ x 9˝ • Flow at 1370 RPM (3 HP) single 1/2˝ groove
• 175 PSI max. • Two cylinder • 175 PSI max. • Four cylinder
• 35 CFM at 175 PSI • 10 HP 12.9 CFM open flow • Port 1/2˝ NPT
• 17 CFM at 175 PSI • 5 HP 8 CFM at 145 PSI • Oil capacity 1/2 qt.
• 805 RPM max. • 17˝ pulley 2 groove B belt • 805 RPM max. • 19˝ pulley 2 groove B belt
• Flow at 1060 RPM (11/2 HP) • Mount 61/4˝ x 43/4˝
• Bore/stroke • Cooling fan/pulley • Bore/stroke • Cooling fan/pulley 9.9 CFM open flow • Size 10˝ x 10˝ x 11˝
41/8˝ x 31/2˝ 1st stage • Size 17˝ x 19˝ x 21˝ 41/8˝ x 31/2˝ 1st stage • Size 20˝ x 29˝ x 28˝ 7.2 CFM at 145 PSI • Shpg. 27 lbs.
21/8˝ x 31/2˝ 2nd stage • Shpg. 250 lbs. 21/8˝ x 31/2˝ 2nd stage • Shpg. 315 lbs.
Truck freight only. Truck freight only.
California
Residents ▲ WARNING:Cancer and Reproductive Harm
! For more information refer to:www.P65Warnings.ca.gov Air Tanks, Valves & Fittings 113
30 Gallon Vertical Air Tank Compressor
ITEM 4-1943 $199.95 Unloader Valve ▲
!
• Air tank is removed from a complete compressor returned to original ITEM 4-1499
retailer for motor or compressor warranty. Portable vertical steel tank on
pneumatic wheels with black exterior paint. Handle with grips. Mount on $39.95
top with holes for compressor and holes for motor. Certified by Campbell • Brand new. Use on compressors driven
Hausfeld Construction. by continuous power input (gas engines,
SPECIFICATIONS • Mounting plate 23.5˝ x 9˝ hydraulic, etc.). Once tank reaches full
• Capacity 30 gallons • Compressor Mounting Holes pressure incoming air from compressor
• Pressure 175 PSI max. • 6.625˝ x 5.875˝ is vented to atmosphere. 1/4˝ NPT tank
• Manifold Port 1/2˝ NPT • Motor Mounting Holes connection, 1/4˝ tubing connection for
• Compressor Port 1/2˝ NPT • 4.875˝ x 3.0625˝ air line, 1/8˝ NPT for idle control or head
• Drain Port 11/2˝ NPT • Overall Size 24.5˝ x 20.25˝ x 37.25˝ unloader. Toggle lever to override.
• Tank size 18.125˝ dia. x 30˝ • Shpg. 80 lbs. Size 3˝ x 31/2˝ x 11/2˝. Shpg. 1 lb.
$19.99
cups on bottom to hold pump in place. UL • Viscosity SAE 90 max. • Outlet nozzle w/strainer
• Bung adapter • Size 91/4˝ x 31/2˝ x 12˝
Listed. Made in Italy.
$3.99 • New, DELAVAN automatic demand 2˝ NPS • Shpg. 5 lbs.
ITEM 2-1255 diaphragm pump. Ideal for spot sprayers
SPECIFICATIONS • 1/2˝ O.D. outlet tube or as replacement on existing equipment. 3/4˝ Sweat Ball Valve
• 51/2 ft. long cord • 30-55 GPH Santoprene diaphragm and Viton valves.
• Model SP40G • Size 17/8˝ x 15/8˝ x 13/4˝ Automatic shut off switch set to 40 PSI. ITEM 20-1622
• 4 watts
• 115 VAC
• 18˝ max. head
• Shpg. 1 lb.
Pump turns on at 25 PSI. Self priming to 4
foot suction lift. Can run dry intermittently
without damage. Wire leads. Rubber
$3.99
• New, full port bronze ball valve. Chrome
12 VDC Submersible Pump vibration damper mounting feet. plated bronze ball.
SPECIFICATIONS 0.42 GPM @ 40 PSI SPECIFICATIONS
• Voltage 12 VDC • Ports 3/8˝ Hosebarb QA port • Ports 3/4˝ for copper pipe • Size 25/8˝ x 11/2˝ x 21/4˝
• Amperage 2.6 Amps adapters • Pressure (WOG) 600 PSI • Shpg. 1 lb.
• Shut-Off Pressure 40 PSI • Duty Intermittent
• Flow Rates • Temperature 110°F max.
• Mount Four bolt on 3.19˝ x
12 VDC Centrifugal
• New. Submersible, brushless impeller 1 GPM @ open flow
pump. Can be mounted in or under tank. 0.85 GPM @ 10 PSI 2.25˝ pattern Pump ▲!
Sold with 115 VAC to 12 VDC adapter 0.71 GPM @ 20 PSI • Size 7˝ x 35/8˝ x 23/8˝
with on/off switch (needs alteration to 0.61 GPM @ 30 PSI • Shpg. 2 lbs.
mate with leads from pump). Pump is not
ITEM 2-1155
self-priming. Inline $253.90
ITEM 2-1443 $13.95 Strainer • Brand new HYPRO “Aqua-Tiger” Bronze
centrifugal pump. Use for ag chemical
SPECIFICATIONS • Input 17mm (0.669˝) O.D. ITEM 20-1237-30 transfer, live well aeration, circulation, etc.
$7.95
• Voltage 12 VDC hose Permanent magnet motor.
• Amperage 0.36 Amps @ • Output 12mm (0.472˝) Not self-priming.
12 VDC, Dry O.D. hose • New. Polypropylene line strainer. Brass
• Leads 6˝ SPECIFICATIONS • 140° F max.
• Flow 6 GPM @ 0’ head captive nuts for mounting. Threaded bowl. • 12 VDC, 5.5 amps • Ports 3/4˝ NPT
pressure • Size 33/4˝ x 21/8˝ x 13/4˝ SPECIFICATIONS • Mesh size 30 • Max. flow 19 GPM • Size 7˝ x 41/2˝ x 4˝
• Max Head Pressure 6.5’ • Shpg. 1 lb. • Ports 1/2˝ NPT • Shpg. 1 lb. • Max. 7 PSI • Shpg. 8 lbs.
120 Diaphragm, Piston & Cistern Pumps 8 www.surpluscenter.com
1/6 HP Red Lion 1/2 HP Red Lion 3 GPM Piston
Submersible Jet Pump Pumps
• Brand new. Handles
Pump ITEM 2-1462 various spraying, washing
• Brand new. Two bolt stamped steel CT Series Two Set Screws, No Lock Collar
U
housing with sealed self aligning ball Bore
bearing. Inner race with 2 set screws. 1-205-16-T ITEM Bore Housing thru-lgth. Shpg. Price
1-205-16-T 1˝ UCT205 1.338˝ 2 lbs. $13.75
Bolt Uses
1-206-20-T 1.25˝ UCT206 1.5˝ 3 lbs. $16.75
ITEM Bore Centers Bolts Shpg. Price
1-207-20-T 1.25˝ UCT207 1.69˝ 4 lbs. $19.05
1-3031 1/2˝ 21/2˝ 1/4˝ 1/2 lb. $9.25 1-207-23-T 17/16˝ UCT207 1.69˝ 4 lbs. $19.05
1-1869 5/8˝ 21/2˝ 1/4˝ 1/2 lb. $9.25 1-208-24-T 1.5˝ UCT208 1.937˝ 6 lbs. $22.75
1-2386 3/4˝ 213/16˝ 5/16˝ 1/2 lb. $11.85 1-209-28-T 1.75˝ UCT209 1.937˝ 6 lbs. $28.05
1-2387 1˝ 2.992˝ 5/16˝ 1 lb. $12.30 1-211-32-T 1-210-31-T 115/16˝ UCT210 2.03˝ 6 lbs. $30.60
1-2388 11/4˝ 39/16˝ 3/8˝ 1 lb. $12.65 1-211-32-T 2˝ UCT211 2.19˝ 10 lbs. $41.10
& 800-488-3407 4 Bolt Flange Bearings 123
4 Bolt Flange Bearings
• Brand new 200 series normal duty flange bearings. Cast iron construction with self-aligning ball bearing insert and grease zerk.
Select gear reducer by output speed, torque and power required, then choose between left, right, dual or hollow output shafts.
Left Output Right Output Dual Output
Ratio ITEM Number ITEM Number ITEM Number Price
13-133-5-L-56C 13-133-5-R-56C 13-133-5-DE-56C $126.40
13-175-5-L-56C 13-175-5-R-56C 13-175-5-DE-56C $152.90
5 13-206-5-L-56C 13-206-5-R-56C 13-206-5-DE-56C $194.05
13-237-5-L-56C 13-237-5-R-56C 13-237-5-DE-56C $233.55
13-262-5-L-182TC 13-262-5-R-182TC 13-262-5-DE-182TC $251.60
13-325-5-L-184TC 13-325-5-R-184TC 13-325-5-DE-184TC $343.60
13-133-10-L-56C 13-133-10-R-56C 13-133-10-DE-56C $126.40
Left Output 13-175-10-L-56C 13-175-10-R-56C 13-175-10-DE-56C $152.90
10 13-206-10-L-56C 13-206-10-R-56C 13-206-10-DE-56C $194.05
13-237-10-L-56C 13-237-10-R-56C 13-237-10-DE-56C $233.55
13-262-10-L-182TC 13-262-10-R-182TC 13-262-10-DE-182TC $251.60
13-325-10-L-184TC 13-325-10-R-184TC 13-325-10-DE-184TC $343.60
13-133-15-L-56C 13-133-15-R-56C 13-133-15-DE-56C $126.40
13-175-15-L-56C 13-175-15-R-56C 13-175-15-DE-56C $152.90
15 13-206-15-L-56C 13-206-15-R-56C 13-206-15-DE-56C $194.05
Right Output 13-237-15-L-56C 13-237-15-R-56C 13-237-15-DE-56C $233.55
13-262-15-L-56C 13-262-15-R-56C 13-262-15-DE-56C $251.60
13-262-15-L-145TC 13-262-15-R-145TC 13-262-15-DE-145TC $251.60
13-325-15-L-182TC 13-325-15-R-182TC 13-325-15-DE-182TC $343.60
13-133-20-L-56C 13-133-20-R-56C 13-133-20-DE-56C $126.40
13-175-20-L-56C 13-175-20-R-56C 13-175-20-DE-56C $152.90
13-206-20-L-56C 13-206-20-R-56C 13-206-20-DE-56C $194.05
20 13-237-20-L-56C 13-237-20-R-56C 13-237-20-DE-56C $233.55
13-262-20-L-56C 13-262-20-R-56C 13-262-20-DE-56C $251.60
13-262-20-L-145TC 13-262-20-R-145TC 13-262-20-DE-145TC $251.60
Dual Output 13-325-20-L-182TC 13-325-20-R-182TC 13-325-20-DE-182TC $343.60
13-133-30-L-56C 13-133-30-R-56C 13-133-30-DE-56C $126.40
13-175-30-L-56C 13-175-30-R-56C 13-175-30-DE-56C $152.90
13-206-30-L-56C 13-206-30-R-56C 13-206-30-DE-56C $194.05
13-237-30-L-56C 13-237-30-R-56C 13-237-30-DE-56C $233.55
30 13-262-30-L-56C 13-262-30-R-56C 13-262-30-DE-56C $251.60
13-262-30-L-145TC 13-262-30-R-145TC 13-262-30-DE-145TC $251.60
13-325-30-L-56C 13-325-30-R-56C 13-325-30-DE-56C $343.60
13-325-30-L-145TC 13-325-30-R-145TC 13-325-30-DE-145TC $343.60
13-133-40-L-56C 13-133-40-R-56C 13-133-40-DE-56C $126.40
Hollow Output
13-175-40-L-56C 13-175-40-R-56C 13-175-40-DE-56C $152.90
Cast Iron Mounting Bases 13-206-40-L-56C 13-206-40-R-56C 13-206-40-DE-56C $194.05
13-237-40-L-56C 13-237-40-R-56C 13-237-40-DE-56C $233.55
• Brand new, cast iron mounting base 40 13-262-40-L-56C 13-262-40-R-56C 13-262-40-DE-56C $251.60
for use with WORLDWIDE right angle
gear reducers. Allows gear reducer to 13-325-40-L-56C 13-325-40-R-56C 13-325-40-DE-56C $343.60
be surface mounted. Bolts included. 13-325-40-L-145TC 13-325-40-R-145TC 13-325-40-DE-145TC $343.60
For use with reducers on pages 124-126 13-133-50-L-56C 13-133-50-R-56C 13-133-50-DE-56C $126.40
ITEM Shpg. Price 13-175-50-L-56C 13-175-50-R-56C 13-175-50-DE-56C $152.90
13-133-BASE 3 lbs. $15.55 13-206-50-L-56C 13-206-50-R-56C 13-206-50-DE-56C $194.05
13-175-BASE 5 lbs. $19.45 13-237-50-L-56C 13-237-50-R-56C 13-237-50-DE-56C $233.55
13-206-BASE 6 lbs. $23.35 50 13-262-50-L-56C 13-262-50-R-56C 13-262-50-DE-56C $251.60
13-237-BASE 7 lbs. $27.25 13-325-50-L-56C 13-325-50-R-56C 13-325-50-DE-56C $343.60
13-262-BASE 8 lbs. $31.15 13-325-50-L-145TC 13-325-50-R-145TC 13-325-50-DE-145TC $343.60
13-325-BASE 11 lbs. $35.00 13-133-60-L-56C 13-133-60-R-56C 13-133-60-DE-56C $126.40
13-175-60-L-56C 13-175-60-R-56C 13-175-60-DE-56C $152.90
13-206-60-L-56C 13-206-60-R-56C 13-206-60-DE-56C $194.05
13-237-60-L-56C 13-237-60-R-56C 13-237-60-DE-56C $233.55
60 13-262-60-L-56C 13-262-60-R-56C 13-262-60-DE-56C $251.60
13-325-60-L-56C 13-325-60-R-56C 13-325-60-DE-56C $343.60
13-325-60-L-145TC 13-325-60-R-145TC 13-325-60-DE-145TC $343.60
California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov Motor Mount Gear Reducers 127
• Brand new, WORLDWIDE ELECTRIC right-angle worm gear reducers. Standard NEMA-C motor mounting flange. Cast iron
housing. Four tapped mounting holes on top and bottom of case. Keyed input and outputs. Shipped filled with oil. Max. input 1750
RPM. Item number suffix indicates electric motor frame. ▲
!
Select gear reducer by output speed, torque and power required, then choose between left, right, dual or hollow output shafts.
Hollow Output Output Output Overhung Output 4 Bolt Mnt
ITEM Number Price HP RPM Torque Load Input Bore Left, Right, Dual Hollow Bore Centers Shpg.
N/A 1.15 350 209 190 5/8˝ 5/8˝ dia. x 2˝ — 31/4˝ x 2˝ 20 lbs.
13-175-5-H-56C $202.00 2.83 350 499 228 5/8˝ 7/8˝ dia. x 115/16˝ 1˝ dia. x 63/16˝ 43/16˝ x 23/4˝ 30 lbs.
13-206-5-H-56C $242.05 3.62 350 925 238 5/8˝ 1˝ dia. x 23/32˝ 11/8˝ dia. x 67/16˝ 5˝ x 27/8˝ 35 lbs.
13-237-5-H-56C $276.45 4.32 350 766 316 5/8˝ 11/8˝ dia. x 23/8˝ 11/4˝ dia. x 67/16˝ 5˝ x 27/8˝ 41 lbs.
13-262-5-H-182TC $328.85 5.24 350 924 333 11/8˝ 11/8˝ dia. x 25/8˝ 17/16˝ dia. x 7˝ 63/8˝ x 33/8˝ 56 lbs.
13-325-5-H-184TC $457.00 9.72 350 1724 302 11/8˝ 13/8˝ dia. x 31/4˝ 115/16˝ dia. x 83/4˝ 71/2˝ x 4˝ 93 lbs.
N/A 0.77 175 247 220 5/8˝ 5/8˝ dia. x 2˝ — 31/4˝ x 2˝ 20 lbs.
13-175-10-H-56C $202.00 1.57 175 515 272 5/8˝ 7/8˝ dia. x 115/16˝ 1˝ dia. x 63/16˝ 43/16˝ x 23/4˝ 30 lbs.
13-206-10-H-56C $242.05 2.77 175 935 283 5/8˝ 1˝ dia. x 23/32˝ 11/8˝ dia. x 67/16˝ 5˝ x 27/8˝ 35 lbs.
13-237-10-H-56C $276.45 3.47 175 1158 378 5/8˝ 11/8˝ dia. x 23/8˝ 11/4˝ dia. x 67/16˝ 5˝ x 27/8˝ 41 lbs.
13-262-10-H-182TC $328.85 4.17 175 1445 398 11/8˝ 11/8˝ dia. x 25/8˝ 17/16˝ dia. x 7˝ 63/8˝ x 33/8˝ 56 lbs.
13-325-10-H-184TC $457.00 7.19 175 2419 369 11/8˝ 13/8˝ dia. x 31/4˝ 115/16˝ dia. x 83/4˝ 71/2˝ x 4˝ 93 lbs.
N/A 0.63 120 283 254 5/8˝ 5/8˝ dia. x 2˝ — 31/4˝ x 2˝ 20 lbs.
13-175-15-H-56C $202.00 1.57 120 554 324 5/8˝ 7/8˝ dia. x 115/16˝ 1˝ dia. x 63/16˝ 43/16˝ x 23/4˝ 30 lbs.
13-206-15-H-56C $242.05 2.09 120 1002 337 5/8˝ 1˝ dia. x 23/32˝ 11/8˝ dia. x 67/16˝ 5˝ x 27/8˝ 35 lbs.
13-237-15-H-56C $276.45 2.64 120 1249 451 5/8˝ 11/8˝ dia. x 23/8˝ 11/4˝ dia. x 67/16˝ 5˝ x 27/8˝ 41 lbs.
13-262-15-H-56C $328.85 3.22 120 1577 475 5/8˝ 11/8˝ dia. x 25/8˝ 17/16˝ dia. x 7˝ 63/8˝ x 33/8˝ 56 lbs.
13-262-15-H-145TC $328.85 3.22 120 1577 475 7/8˝ 11/8˝ dia. x 25/8˝ 17/16˝ dia. x 7˝ 63/8˝ x 33/8˝ 56 lbs.
13-325-15-H-182TC $457.00 5.45 120 2611 450 11/8˝ 13/8˝ dia. x 31/4˝ 115/16˝ dia. x 83/4˝ 71/2˝ x 4˝ 93 lbs.
N/A 0.50 88 276 254 5/8˝ 5/8˝ dia. x 2˝ — 31/4˝ x 2˝ 20 lbs.
13-175-20-H-56C $202.00 1.26 88 737 378 5/8˝ 7/8˝ dia. x 115/16˝ 1˝ dia. x 63/16˝ 43/16˝ x 23/4˝ 30 lbs.
13-206-20-H-56C $242.05 1.57 88 914 394 5/8˝ 1˝ dia. x 23/32˝ 11/8˝ dia. x 67/16˝ 5˝ x 27/8˝ 35 lbs.
13-237-20-H-56C $276.45 2.06 88 1195 530 5/8˝ 11/8˝ dia. x 23/8˝ 11/4˝ dia. x 67/16˝ 5˝ x 27/8˝ 41 lbs.
13-262-20-H-56C $328.85 2.67 88 1563 558 5/8˝ 11/8˝ dia. x 25/8˝ 17/16˝ dia. x 7˝ 63/8˝ x 33/8˝ 56 lbs.
13-262-20-H-145TC $328.85 2.67 88 1563 558 7/8˝ 11/8˝ dia. x 25/8˝ 17/16˝ dia. x 7˝ 63/8˝ x 33/8˝ 56 lbs.
13-325-20-H-182TC $457.00 4.74 88 2875 526 11/8˝ 13/8˝ dia. x 31/4˝ 115/16˝ dia. x 83/4˝ 71/2˝ x 4˝ 93 lbs.
N/A 0.47 58 336 254 5/8˝ 5/8˝ dia. x 2˝ — 31/4˝ x 2˝ 20 lbs.
13-175-30-H-56C $202.00 0.89 58 666 419 5/8˝ 7/8˝ dia. x 115/16˝ 1˝ dia. x 63/16˝ 43/16˝ x 23/4˝ 30 lbs.
13-206-30-H-56C $242.05 1.65 58 1310 436 5/8˝ 1˝ dia. x 23/32˝ 11/8˝ dia. x 67/16˝ 5˝ x 27/8˝ 35 lbs.
13-237-30-H-56C $276.45 1.82 58 1507 581 5/8˝ 11/8˝ dia. x 23/8˝ 11/4˝ dia. x 67/16˝ 5˝ x 27/8˝ 41 lbs.
13-262-30-H-56C $328.85 2.22 58 1827 612 5/8˝ 11/8˝ dia. x 25/8˝ 17/16˝ dia. x 7˝ 63/8˝ x 33/8˝ 53 lbs.
13-262-30-H-145TC $328.85 2.22 58 1827 612 7/8˝ 11/8˝ dia. x 25/8˝ 17/16˝ dia. x 7˝ 63/8˝ x 33/8˝ 53 lbs.
13-325-30-H-56C $457.00 3.66 58 3045 585 5/8˝ 13/8˝ dia. x 31/4˝ 115/16˝ dia. x 83/4˝ 71/2˝ x 4˝ 90 lbs.
13-325-30-H-145TC $457.00 3.66 58 3045 585 7/8˝ 13/8˝ dia. x 31/4˝ 115/16˝ dia. x 83/4˝ 71/2˝ x 4˝ 90 lbs.
N/A 0.38 44 356 254 5/8˝ 5/8˝ dia. x 2˝ — 31/4˝ x 2˝ 20 lbs.
13-175-40-H-56C $202.00 0.79 44 714 495 5/8˝ 7/8˝ dia. x 115/16˝ 1˝ dia. x 63/16˝ 43/16˝ x 23/4˝ 30 lbs.
13-206-40-H-56C $242.05 1.09 44 1120 515 5/8˝ 1˝ dia. x 23/32˝ 11/8˝ dia. x 67/16˝ 5˝ x 27/8˝ 35 lbs.
13-237-40-H-56C $276.45 1.45 44 1483 684 5/8˝ 11/8˝ dia. x 23/8˝ 11/4˝ dia. x 67/16˝ 5˝ x 27/8˝ 41 lbs.
13-262-40-H-56C $328.85 1.85 44 1919 720 5/8˝ 11/8˝ dia. x 25/8˝ 17/16˝ dia. x 7˝ 63/8˝ x 33/8˝ 53 lbs.
13-325-40-H-56C $457.00 3.35 44 3692 697 5/8˝ 13/8˝ dia. x 31/4˝ 115/16˝ dia. x 83/4˝ 71/2˝ x 4˝ 90 lbs.
13-325-40-H-145TC $457.00 3.35 44 3692 697 7/8˝ 13/8˝ dia. x 31/4˝ 115/16˝ dia. x 83/4˝ 71/2˝ x 4˝ 90 lbs.
N/A 0.29 35 312 254 5/8˝ 5/8˝ dia. x 2˝ — 31/4˝ x 2˝ 20 lbs.
13-175-50-H-56C $202.00 0.50 35 538 564 5/8˝ 7/8˝ dia. x 115/16˝ 1˝ dia. x 63/16˝ 43/16˝ x 23/4˝ 30 lbs.
13-206-50-H-56C $242.05 0.74 35 830 587 5/8˝ 1˝ dia. x 23/32˝ 11/8˝ dia. x 67/16˝ 5˝ x 27/8˝ 35 lbs.
13-237-50-H-56C $276.45 1.32 35 1527 763 5/8˝ 11/8˝ dia. x 23/8˝ 11/4˝ dia. x 67/16˝ 5˝ x 27/8˝ 41 lbs.
13-262-50-H-56C $328.85 1.37 35 1658 803 5/8˝ 11/8˝ dia. x 25/8˝ 17/16˝ dia. x 7˝ 63/8˝ x 33/8˝ 53 lbs.
13-325-50-H-56C $457.00 2.49 35 3413 803 5/8˝ 13/8˝ dia. x 31/4˝ 115/16˝ dia. x 83/4˝ 71/2˝ x 4˝ 90 lbs.
13-325-50-H-145TC $457.00 2.49 35 3413 803 7/8˝ 13/8˝ dia. x 31/4˝ 115/16˝ dia. x 83/4˝ 71/2˝ x 4˝ 90 lbs.
N/A 0.23 29 158 254 5/8˝ 5/8˝ dia. x 2˝ — 31/4˝ x 2˝ 20 lbs.
13-175-60-H-56C $202.00 0.38 29 433 613 5/8˝ 7/8˝ dia. x 115/16˝ 1˝ dia. x 63/16˝ 43/16˝ x 23/4˝ 30 lbs.
13-206-60-H-56C $242.05 0.60 29 750 639 5/8˝ 1˝ dia. x 23/32˝ 11/8˝ dia. x 67/16˝ 5˝ x 27/8˝ 35 lbs.
13-237-60-H-56C $276.45 0.86 29 1149 838 5/8˝ 11/8˝ dia. x 23/8˝ 11/4˝ dia. x 67/16˝ 5˝ x 27/8˝ 41 lbs.
13-262-60-H-56C $328.85 1.16 29 1670 882 5/8˝ 11/8˝ dia. x 25/8˝ 17/16˝ dia. x 7˝ 63/8˝ x 33/8˝ 53 lbs.
13-325-60-H-56C $457.00 2.03 29 3127 882 5/8˝ 13/8˝ dia. x 31/4˝ 115/16˝ dia. x 83/4˝ 71/2˝ x 4˝ 90 lbs.
13-325-60-H-145TC $457.00 2.03 29 3127 882 7/8˝ 13/8˝ dia. x 31/4˝ 115/16˝ dia. x 83/4˝ 71/2˝ x 4˝ 90 lbs.
128 Right Angle Shaft-to-Shaft Gear Reducers ▲
!
California
Residents
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov
ITEM Number ITEM Number Output in. lbs. Overhung 4 Bolt Mount
Ratio Left Output Right Output HP RPM Torque Load Input Shaft Output Shaft Centers Shpg. Price
13-133-5-L 13-133-5-R 1.15 350 209 190 1/2˝ dia. x 15/16˝ 5/8˝ dia. x 2˝ 31/4˝ x 2˝ 15 lbs. $108.90
13-175-5-L 13-175-5-R 2.83 350 499 228 5/8˝ dia. x 19/16˝ 7/8˝ dia. x 125/32˝ 43/16˝ x 23/4˝ 23 lbs. $131.45
13-206-5-L 13-206-5-R 3.62 350 925 238 5/8˝ dia. x 19/16˝ 1˝ dia. x 23/32˝ 5˝ x 27/8˝ 28 lbs. $157.40
5
13-237-5-L 13-237-5-R 4.32 350 766 316 3/4˝ dia. x 2˝ 11/8˝ dia. x 23/8˝ 5˝ x 27/8˝ 37 lbs. $180.55
13-262-5-L 13-262-5-R 5.24 350 924 333 3/4˝ dia. x 2˝ 11/8˝ dia. x 25/8˝ 63/8˝ x 33/8˝ 51 lbs. $221.70
13-325-5-L 13-325-5-R 9.72 350 1724 302 7/8˝ dia. x 27/16˝ 13/8˝ dia. x 31/4˝ 71/2˝ x 4˝ 82 lbs. $312.55
13-133-10-L 13-133-10-R 0.77 175 247 220 1/2˝ dia. x 15/16˝ 5/8˝ dia. x 2˝ 31/4˝ x 2˝ 15 lbs. $108.90
13-175-10-L 13-175-10-R 1.57 175 515 272 5/8˝ dia. x 19/16˝ 7/8˝ dia. x 125/32˝ 43/16˝ x 23/4˝ 23 lbs. $131.45
13-206-10-L 13-206-10-R 2.77 175 935 283 5/8˝ dia. x 19/16˝ 1˝ dia. x 23/32˝ 5˝ x 27/8˝ 28 lbs. $157.40
10
13-237-10-L 13-237-10-R 3.47 175 1158 378 3/4˝ dia. x 2˝ 11/8˝ dia. x 23/8˝ 5˝ x 27/8˝ 37 lbs. $180.55
13-262-10-L 13-262-10-R 4.17 175 1445 398 3/4˝ dia. x 2˝ 11/8˝ dia. x 25/8˝ 63/8˝ x 33/8˝ 51 lbs. $221.70
13-325-10-L 13-325-10-R 7.19 175 2419 369 7/8˝ dia. x 27/16˝ 13/8˝ dia. x 31/4˝ 71/2˝ x 4˝ 82 lbs. $312.55
13-133-15-L 13-133-15-R 0.63 120 283 254 1/2˝ dia. x 15/16˝ 5/8˝ dia. x 2˝ 31/4˝ x 2˝ 15 lbs. $108.90
13-175-15-L 13-175-15-R 1.24 120 554 324 5/8˝ dia. x 19/16˝ 7/8˝ dia. x 125/32˝ 43/16˝ x 23/4˝ 23 lbs. $131.45
13-206-15-L 13-206-15-R 2.09 120 1002 337 5/8˝ dia. x 19/16˝ 1˝ dia. x 23/32˝ 5˝ x 27/8˝ 28 lbs. $157.40
15
13-237-15-L 13-237-15-R 2.64 120 1249 451 3/4˝ dia. x 2˝ 11/8˝ dia. x 23/8˝ 5˝ x 27/8˝ 37 lbs. $180.55
13-262-15-L 13-262-15-R 3.22 120 1577 475 3/4˝ dia. x 2˝ 11/8˝ dia. x 25/8˝ 63/8˝ x 33/8˝ 51 lbs. $221.70
13-325-15-L 13-325-15-R 5.45 120 2611 450 7/8˝ dia. x 27/16˝ 13/8˝ dia. x 31/4˝ 71/2˝ x 4˝ 82 lbs. $312.55
13-133-20-L 13-133-20-R 0.50 88 276 254 1/2˝ dia. x 15/16˝ 5/8˝ dia. x 2˝ 31/4˝ x 2˝ 15 lbs. $108.90
13-175-20-L 13-175-20-R 1.26 88 737 378 5/8˝ dia. x 19/16˝ 7/8˝ dia. x 125/32˝ 43/16˝ x 23/4˝ 23 lbs. $131.45
13-206-20-L 13-206-20-R 1.57 88 914 394 5/8˝ dia. x 19/16˝ 1˝ dia. x 23/32˝ 5˝ x 27/8˝ 28 lbs. $157.40
20
13-237-20-L 13-237-20-R 2.06 88 1195 530 3/4˝ dia. x 2˝ 11/8˝ dia. x 23/8˝ 5˝ x 27/8˝ 37 lbs. $180.55
13-262-20-L 13-262-20-R 2.67 88 1563 558 3/4˝ dia. x 2˝ 11/8˝ dia. x 25/8˝ 63/8˝ x 33/8˝ 51 lbs. $221.70
13-325-20-L 13-325-20-R 4.74 88 2875 526 7/8˝ dia. x 27/16˝ 13/8˝ dia. x 31/4˝ 71/2˝ x 4˝ 82 lbs. $312.55
13-133-30-L 13-133-30-R 0.47 58 336 254 1/2˝ dia. x 15/16˝ 5/8˝ dia. x 2˝ 31/4˝ x 2˝ 15 lbs. $108.90
13-175-30-L 13-175-30-R 0.89 58 666 419 5/8˝ dia. x 19/16˝ 7/8˝ dia. x 125/32˝ 43/16˝ x 23/4˝ 23 lbs. $131.45
13-206-30-L 13-206-30-R 1.65 58 1310 436 5/8˝ dia. x 19/16˝ 1˝ dia. x 23/32˝ 5˝ x 27/8˝ 28 lbs. $157.40
30
13-237-30-L 13-237-30-R 1.82 58 1507 581 3/4˝ dia. x 2˝ 11/8˝ dia. x 23/8˝ 5˝ x 27/8˝ 37 lbs. $180.55
13-262-30-L 13-262-30-R 2.22 58 1827 612 3/4˝ dia. x 2˝ 11/8˝ dia. x 25/8˝ 63/8˝ x 33/8˝ 51 lbs. $221.70
13-325-30-L 13-325-30-R 3.66 58 3045 585 7/8˝ dia. x 27/16˝ 13/8˝ dia. x 31/4˝ 71/2˝ x 4˝ 82 lbs. $312.55
13-133-40-L 13-133-40-R 0.38 44 356 254 1/2˝ dia. x 15/16˝ 5/8˝ dia. x 2˝ 31/4˝ x 2˝ 15 lbs. $108.90
13-175-40-L 13-175-40-R 0.79 44 714 495 5/8˝ dia. x 19/16˝ 7/8˝ dia. x 125/32˝ 43/16˝ x 23/4˝ 23 lbs. $131.45
13-206-40-L 13-206-40-R 1.09 44 1120 515 5/8˝ dia. x 19/16˝ 1˝ dia. x 23/32˝ 5˝ x 27/8˝ 28 lbs. $157.40
40
13-237-40-L 13-237-40-R 1.45 44 1483 684 3/4˝ dia. x 2˝ 11/8˝ dia. x 23/8˝ 5˝ x 27/8˝ 37 lbs. $180.55
13-262-40-L 13-262-40-R 1.85 44 1919 720 3/4˝ dia. x 2˝ 11/8˝ dia. x 25/8˝ 63/8˝ x 33/8˝ 51 lbs. $221.70
13-325-40-L 13-325-40-R 3.35 44 3692 697 7/8˝ dia. x 27/16˝ 13/8˝ dia. x 31/4˝ 71/2˝ x 4˝ 82 lbs. $312.55
13-133-50-L 13-133-50-R 0.29 35 312 254 1/2˝ dia. x 15/16˝ 5/8˝ dia. x 2˝ 31/4˝ x 2˝ 15 lbs. $108.90
13-175-50-L 13-175-50-R 0.50 35 538 564 5/8˝ dia. x 19/16˝ 7/8˝ dia. x 125/32˝ 43/16˝ x 23/4˝ 23 lbs. $131.45
13-206-50-L 13-206-50-R 0.74 35 830 587 5/8˝ dia. x 19/16˝ 1˝ dia. x 23/32˝ 5˝ x 27/8˝ 28 lbs. $157.40
50
13-237-50-L 13-237-50-R 1.32 35 1527 763 3/4˝ dia. x 2˝ 11/8˝ dia. x 23/8˝ 5˝ x 27/8˝ 37 lbs. $180.55
13-262-50-L 13-262-50-R 1.37 35 1658 803 3/4˝ dia. x 2˝ 11/8˝ dia. x 25/8˝ 63/8˝ x 33/8˝ 51 lbs. $221.70
13-325-50-L 13-325-50-R 2.49 35 3413 803 7/8˝ dia. x 27/16˝ 13/8˝ dia. x 31/4˝ 71/2˝ x 4˝ 82 lbs. $312.55
13-133-60-L 13-133-60-R 0.23 29 158 254 1/2˝ dia. x 15/16˝ 5/8˝ dia. x 2˝ 31/4˝ x 2˝ 15 lbs. $108.90
13-175-60-L 13-175-60-R 0.38 29 433 613 5/8˝ dia. x 19/16˝ 7/8˝ dia. x 125/32˝ 43/16˝ x 23/4˝ 23 lbs. $131.45
13-206-60-L 13-206-60-R 0.60 29 750 639 5/8˝ dia. x 19/16˝ 1˝ dia. x 23/32˝ 5˝ x 27/8˝ 28 lbs. $157.40
60
13-237-60-L 13-237-60-R 0.86 29 1149 838 3/4˝ dia. x 2˝ 11/8˝ dia. x 23/8˝ 5˝ x 27/8˝ 37 lbs. $180.55
13-262-60-L 13-262-60-R 1.16 29 1670 882 3/4˝ dia. x 2˝ 11/8˝ dia. x 25/8˝ 63/8˝ x 33/8˝ 51 lbs. $221.70
13-325-60-L 13-325-60-R 2.03 29 3127 882 7/8˝ dia. x 27/16˝ 13/8˝ dia. x 31/4˝ 71/2˝ x 4˝ 82 lbs. $312.55
California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov Shaft Mount Gear Reducers & Accessories 129
Shaft Mount Gear Reducers ▲
!
Tapered Bushings
• Twin tapered bushing kit for shaft mount reducers.
Includes two bushings, bolts and full length shaft key.
Order bushing by gear reducer size and diameter of shaft it will be mounted on.
Size ITEM Motor Frame Shpg. Price ITEM Shpg. Price ITEM Shpg. Price
2 13-2-MM 56-215T 34 lbs. $167.30 13-2-BSK 2 lbs. $92.35 13-2-BG 30 lbs. $167.20
3 13-3-MM 56-215T 36 lbs. $172.10 13-3-BSK 2 lbs. $118.15 13-3-BG 38 lbs. $190.00
4 13-4-MM 143-286T 79 lbs. $268.10 13-4-BSK 2 lbs. $118.15 13-4-BG 44 lbs. $217.95
5 13-5-MM 143-286T 82 lbs. $268.10 13-5-BSK 3 lbs. $140.35 13-5-BG 48 lbs. $240.35
6 13-6-MM 143-286T 107 lbs. $360.55 13-6-BSK 4 lbs. $265.90 13-6-BG 61 lbs. $273.80
130 Worldwide Helical Inline Speed Reducers Residents
California
▲ WARNING:Cancer and Reproductive Harm
! For more information refer to:www.P65Warnings.ca.gov
• Brand new, WORLDWIDE ELECTRIC helical inline speed reducers. Cast iron housings. Drop-in replacement for
most major inline reducer brands. Gearbox flanges are designed to accept NEMA C-Face electric motors. ▲
!
Pictures Represent
Box Size 37
DROP
SHIP
Box Size 37 • Output shaft 1˝ dia. x 1.97˝ long, 1/4˝ wide keyway, shaft end tapped 3/8˝-16 • Base mount four 0.35˝ holes on 5.12˝ x 4.33˝ ctrs.
Output RPM Input Output Over-Hung
Nominal Actual at 1800 RPM HP Torque Load Motor Service
ITEM Ratio Ratio Input Max. (in.-lbs.) Max. (lbs.) Frame Stages Class Shpg. Price
13-1552-10-145TC 10:1 10.02 175 2 680 388 145TC 2 III 31 lbs. $384.95
13-1552-15-145TC-3 15:1 14.08 124 2 1016 436 145TC 3 II 31 lbs. $384.95
13-1552-15-145TC 15:1 15.75 111 2 1070 451 145TC 2 II 31 lbs. $384.95
13-1552-20-56C 20:1 19.95 88 1 680 489 56C 2 III 31 lbs. $384.95
13-1552-20-145TC 20:1 19.95 88 2 1355 489 145TC 2 I 31 lbs. $384.95
13-1552-30-56C 30:1 31.02 56 1 1025 565 56C 3 II 31 lbs. $384.95
13-1552-40-56C 40:1 40.08 44 1 1325 615 56C 3 I 31 lbs. $384.95
13-1552-50-56C 50:1 52.24 33 1 1725 670 56C 3 I 31 lbs. $384.95
13-1552-60-56C 60:1 60.84 29 0.89 1770 705 56C 3 I * 31 lbs. $384.95
Box Size 47 • Output shaft 1.25˝ dia. x 2.36˝ long, 1/4˝ wide keyway, shaft end tapped 1/2˝-13 • Base mount four 0.55˝ holes on 6.5˝ x 5.31˝ ctrs.
Output RPM Input Output Over-Hung Truck
Nominal Actual at 1800 RPM HP Torque Load Motor Service Freight
ITEM Ratio Ratio Input Max. (in.-lbs.) Max. (lbs.) Frame Stages Class Shpg. Price
13-1553-10-182TC 10:1 11.27 155 3 1150 590 182TC 2 II 50 lbs. $442.70
13-1553-15-182TC 15:1 15.18 115 3 1555 650 182TC 2 II 50 lbs. $442.70
13-1553-20-145TC 20:1 18.37 95 2 1250 690 145TC 2 III 50 lbs. $442.70
13-1553-20-182TC 20:1 18.37 95 3 1880 690 182TC 2 I 50 lbs. $442.70
13-1553-30-145TC 30:1 31.83 55 2 2105 835 145TC 3 I 50 lbs. $442.70
13-1553-30-182TC 30:1 31.83 55 3 3250 835 182TC 3 I * 50 lbs. $442.70
13-1553-40-56C 40:1 41.51 42 1 1370 910 56C 3 III 50 lbs. $442.70
13-1553-50-56C 50:1 52.84 33 1 1740 985 56C 3 II 50 lbs. $442.70
13-1553-60-56C 60:1 63.37 28 1 2095 1050 56C 3 I 50 lbs. $442.70
Box Size 67 • Output shaft 1.375˝ dia. x 2.76˝ long, 5/16˝ wide keyway, shaft end tapped 1/2˝-13 • Base mount four 0.55˝ holes on 7.68˝ x 5.91˝ ctrs.
Output RPM Input Output Over-Hung Truck
Nominal Actual at 1800 RPM HP Torque Load Motor Service Freight
ITEM Ratio Ratio Input Max. (in.-lbs.) Max. (lbs.) Frame Stages Class Shpg. Price
13-1554-10-184TC 10:1 9.9 177 5 1685 880 184TC 2 III 73 lbs. $628.75
13-1554-20-182TC 20:1 22.9 76 3 2270 1165 182TC 3 III 73 lbs. $628.75
13-1554-30-145TC 30:1 32.02 55 2 2115 1305 145TC 3 III 73 lbs. $628.75
13-1554-40-145TC 40:1 41.22 42 2 2725 1420 145TC 3 II 73 lbs. $628.75
13-1554-50-145TC 50:1 52.21 34 2 3400 1480 145TC 3 I 73 lbs. $628.75
13-1554-60-56C 60:1 63.07 28 1 2085 1480 56C 3 III 73 lbs. $628.75
13-1554-80-56C 80:1 78.59 22 1 2590 1480 56C 3 II 73 lbs. $628.75
13-1554-100-56C 100:1 98.69 18 1 3260 1480 56C 3 II 73 lbs. $628.75
13-1554-120-56C 120:1 125.28 14 1 4140 1480 56C 3 I 73 lbs. $628.75
California
Residents ▲ WARNING:Cancer and Reproductive Harm
! For more information refer to:www.P65Warnings.ca.gov Gear Reducers and Accessories 131
• Brand new, WORLDWIDE ELECTRIC helical inline speed reducers. Cast iron housings. Drop-in replacement for most major inline
reducer brands. Gearbox flanges are designed to accept NEMA C-Face electric motors. ▲ !
Box Size 97 • Output shaft 2.375˝ dia. x 4.72˝ long, 5/8˝ wide keyway, shaft end tapped 3/4˝-11 • Base mount four 0.87˝ holes on 12.2˝ x 9.84˝ ctrs.
Output RPM Input Output Over-Hung Truck
Nominal Actual at 1800 RPM HP Torque Load Motor Service Freight
ITEM Ratio Ratio Input Max. (in.-lbs.) Max. (lbs.) Frame Stages Class Shpg. Price
13-1557-10-284TC 10:1 10 175 25 8520 2430 284TC 2 III 255 lbs. $1940.85
13-1557-10-286TC 10:1 10 175 30 10225 2430 286TC 2 II 255 lbs. $1940.85
13-1557-20-254TC 20:1 21.23 82 15 10910 3125 254TC 2 III 255 lbs. $1940.85
13-1557-20-256TC 20:1 21.23 82 20 14450 3125 256TC 2 II 255 lbs. $1940.85
13-1557-30-213TC 30:1 28.98 60 7.5 7230 3465 213TC 3 III 255 lbs. $1940.85
13-1557-30-215TC 30:1 28.98 60 10 9645 3465 215TC 3 III 255 lbs. $1940.85
13-1557-30-254TC 30:1 28.98 60 15 14465 3465 254TC 3 II 255 lbs. $1940.85
13-1557-40-213TC 40:1 44.57 39 7.5 11125 4000 213TC 3 III 255 lbs. $1940.85
13-1557-40-215TC 40:1 44.57 39 10 14835 4000 215TC 3 II 255 lbs. $1940.85
13-1557-50-213TC 50:1 51.1 34 7.5 12765 4080 213TC 3 III 255 lbs. $1940.85
13-1557-50-215TC 50:1 51.1 34 10 17020 4080 215TC 3 II 255 lbs. $1940.85
13-1557-60-213TC 60:1 59.52 29 7.5 14965 4080 213TC 3 II 255 lbs. $1940.85
13-1557-80-184TC 80:1 82.59 21 5 13775 4080 184TC 3 II 255 lbs. $1940.85
13-1557-80-213TC 80:1 82.59 21 7.5 20665 4080 213TC 3 I 255 lbs. $1940.85
13-1557-100-184TC 100:1 97.76 18 5 16070 4080 184TC 3 II 255 lbs. $1940.85
13-1557-120-182TC 120:1 127.61 14 3 12400 4080 182TC 3 III 255 lbs. $1940.85
In addition to the 6 sizes of inline reducers shown on these 2 pages there are over 50 additional reducers in 3
larger sizes (107,137 and 147) shown on our website www.surpluscenter.com. These larger models have gear
reduction ranges from 10:1 up to 120:1. They are designed for use with NEMA motor flanges from 213TC to
405TC and input as high as 100 HP.
132 Right Angle Gearboxes www.surpluscenter.com
$79.95
• Brand new, CLEVELAND GEAR right-angle
• Bearing Outside Diameter
2.165˝ O.D. • Shpg. 6 lbs. 50:1 Gear
Reducer
worm gear reducer. Dual output shafts. Aluminum 20:1 Gear
housing. Four mounting slots on top and bottom
Reducer ITEM 13-1594
of case. Shipped filled with oil.
SPECIFICATIONS ITEM 13-1509 $69.95
• New, IPTS, right-angle worm gear reducer. Cast
$79.95
• Ratio 10:1 60mm
• Input Power 2 HP max. • Overhung Load 350 lbs. iron housing. Long output shaft. Mounts with thru
• Input Speed 1725 RPM • Input Shaft 5/8˝ dia. x 13/8˝ • New, BOSTON, Model F71020B4GT2, holes on housing. Auxiliary 3/16˝ dia. x 1/2˝ shaft w/
max. w/1/4˝ crosshole
• Output Speed 175 RPM • Output Shafts 3/4˝ dia. x cast iron right angle gear reducer. Left flat on rear of output shaft.
max. 13/4˝ w/5/16˝ crosshole side output. SPECIFICATIONS • Centerline Distance 2.06˝
• Output Torque 550 in-lb. • Mount 70mm x 80mm SPECIFICATIONS • Shafts • Ratio 50:1 • Input Shaft 5/8˝ dia. x 19/16˝
max. • Size 51/4˝ x 33/8˝ x 55/8˝ • Ratio 20:1 Input female 1/2˝ bore • Power 0.44 HP max. with 3/16˝ key
• Output Centerline Height • Shpg. 9 lbs. • Power 1/4 HP max. Output 1/2˝ dia. x 11/4˝ • Input Speed 1725 RPM • Output Type Right hand
• Input 1750 RPM max. with 1/8˝ keyway & flat max. shaft
• Output Shaft 1˝ dia. x 6˝
80:1 1 HP • Output 87.5 RPM max. • Mount 4 holes 1.69˝ x 2.63˝
• Torque 149 in.lbs. max. top and bottom
• Output Speed 35 RPM
max. with 1/4˝ key slot
Aluminum • Output centerline ht. 1.31˝ • Size 43/4˝ x 4˝ x 41/4˝
• Motor mount 42CZ • Shpg. 8 lbs.
• Output Torque 504 in-lb.
max.
• Mount 5˝ x 33/4˝
• Size 5˝ x 31/2˝ x 6˝
Right Angle • Overhung Load 570 lbs. • Shpg. 18 lbs.
Gear Reducer Tol-O-Matic
ITEM 13-1597 Float A Shaft 10:1 Gear Reducer
$129.95 Gearbox
• New aluminum worm gear reducer. Alumi-
num alloy housings. Pre-filled with oil. Two ITEM 13-116266 ITEM 13-1574 $69.95
bearings on the input and output shafts,
double lip oil seals, epoxy paint for rust $39.95 • New, CLEVELAND GEAR model
AKQM70-LH gear reducer. Aluminum
prevention, and hollow output bores to ac- • Float-A-Shaft is a universal right-angle gearbox
cept plug-in output shafts (sold separately). coupling, consisting of two 45° helical gears that housing. Four mounting holes on either
mesh at right angles. They can be operated in side of output bore. CW rotation of input
SPECIFICATIONS either direction and slide axially along either shaft. shaft give CW output when viewed from
• Box Size 75 mm Center 256 lbs. Max An aluminum housing encloses gears which are right side of housing.
Distance • Efficiency 62 % keyed directly to the shafts. Unique floating de-
• Gear Ratio 80:1
SPECIFICATIONS
• Motor Mount 56C sign maintains perfect alignment. Bronze bush- • Ratio 10:1 • 30mm dia. with last 4˝
• Output RPM @ 1750 RPM • Output Bore 11/4˝ hollow, ings. Rated for a maximum of 500 RPM. Shafts • Power 3.2 HP max. 1-15 spline
Input 22 RPM 1/4˝ keyway • Output Bore Accepts 11/8˝
• Input Hp (1.0 S.F.) 0.97 • Top & Bottom Mount must be supported with external bearings. • Input Speed 1800 RPM
dia. shaft w/1/4˝ keyway
max.
Hp Max 120mm x 90mm SPECIFICATIONS • Output Speed 180 RPM • Bore thru length 4.75˝
• Output Torque 1672 in.-lb. • Back Mount 153mm x • Model 01050000 • RPM 500 max. max. • Mount Four M8 tapped
Max 90mm • Gear Ratio 1:1 • Length thru bore 3˝ • Torque 835 in-lbs. max. holes on 3.937˝ bolt circle
• Over-Hung Load 1205 • Overall Size 8.37˝ x 6.5˝ • Bore 1/2˝ dia. x 1/8˝ keyway • Orientation LH • Center Line Distance each side of output bore
lbs. Max x 9.5˝ • Torque 100 in.lb. max. at • Size 31/2˝ x 23/4˝ x 3˝ 70mm • Size 7˝ x 43/4˝ x 71/2˝
• Output Shaft Thrust Load • Shpg. 20 lbs. 225 RPM • Shpg. 3 lbs. • Input Shaft 9˝ total length, • Shpg. 24 lbs.
California
Residents ▲ WARNING:Cancer and Reproductive Harm
! For more information refer to:www.P65Warnings.ca.gov Rod Ends & Centrifugal Clutches 133
Sprocket Centrifugal Clutches ▲
! Threaded Rod Ends
• Brand new, HILLIARD EXTREME DUTY • Brand new. Available with left or right hand threads. Steel
sprocket centrifugal clutches. Ideal for housing with steel raceway.
go-karts, youth snowmobiles and other
applications. Thermodynamically designed
clutch shoe increases the clutch’s capacity to
absorb heat without damaging clutch springs, Female Threaded Rod Ends
resulting in longer life and greater reliability. Easy
to install. Overload protection. Made in USA. With Male Threaded Studs
SPECIFICATIONS • Bi-directional operation Left Hand Right Hand End-To-Center
• Maximum power 13 HP • Load-free starting ITEM ITEM Thread Length Shpg. Price
• Engaging speed 2300 RPM • Shpg. 4 lbs. 13-AFL-4S 13-AFR-4S 1/4˝-28 1.312˝ 1/4 lb. $ 7.40
Integral 13-AFL-5S 13-AFR-5S 5/16˝-24 1.375˝ 1/4 lb. $ 7.80
ITEM Bore Pitch Teeth Key Price 13-AFL-6S 13-AFR-6S 3/8˝-24 1.625˝ 1/4 lb. $ 8.80
1-3971-62 5/8˝ dia. x 25/16˝ 35 12 3/16˝ $40.35 13-AFL-7S 13-AFR-7S 7/16˝-20 1.812˝ 1/2 lb. $12.65
1-3972-62 5/8˝ dia. x 21/4˝ 40/41 10 3/16˝ $40.35 13-AFL-8S 13-AFR-8S 1/2˝-20 2.125˝ 1/2 lb. $16.15
1-3971-75 3/4˝ dia. x 25/16˝ 35 12 3/16˝ $40.35 13-AFL-10S 13-AFR-10S 5/8˝-18 2.500˝ 3/4 lb. $17.75
1-3973 ** 3/4˝ dia. x 25/16˝ 35 12 3/16˝ $46.60 13-AFL-12S 13-AFR-12S 3/4˝-16 2.875˝ 11/4 lb. $21.95
1-3972-75 3/4˝ dia. x 21/4˝ 40/41 10 3/16˝ $40.35
1-3989-17 * 1˝ dia. x 23/8˝ 35 17 1/4˝ $97.50
1-3988-14 * 1˝ dia. x 23/8˝ 40/41 14 1/4˝ $97.50
* Not intended for racing
** Intended for Mini-Bike’s engaging speed 1800 RPM
Male Threaded Rod Ends
With Male Threaded Studs
Pulley Centrifugal Left Hand Right Hand End-To-Center
ITEM ITEM Thread Length Shpg. Price
Clutches ▲! 13-AML-4S 13-AMR-4S 1/4˝-28 1.562˝ 1/4 lb. $ 7.10
$75.90 ea.
13-AML-5S
13-AML-6S
13-AMR-5S
13-AMR-6S
5/16˝-24 1.875˝ 1/4 lb.
3/8˝-24 1.938˝ 1/4 lb.
$ 7.80
$ 8.80
• Brand new, HILLIARD
EXTREME DUTY pulley – 13-AMR-7S 7/16˝-20 2.125˝ 1/2 lb. $12.65
centrifugal clutches. Ideal 13-AML-8S 13-AMR-8S 1/2˝-20 2.438˝ 1/2 lb. $16.15
for chipper shredders, power 13-AML-10S 13-AMR-10S 5/8˝-18 2.625˝ 3/4 lb. $17.90
trowels, concrete mixers, power screeds, air compressors and
lawn and garden equipment. Thermodynamically designed clutch – 13-AMR-12S 3/4˝-16 2.875˝ 11/4 lb. $21.95
shoe increases the clutch’s capacity to absorb heat without
damaging clutch springs, resulting in longer life and greater
reliability. Easy to install. Overload protection. Made in USA.
SPECIFICATIONS
• Maximum power 13 HP • Load-free starting • Bi-directional operation
• Works with A or B belts • Shpg. 4 lbs. Female Threaded Rod Ends
3.0˝ Diameter Pulley w/ Bronze Bushing Left Hand Right Hand End-To-Center
ITEM Bore Integral Key Engaging Speed ITEM ITEM Bore Thread Length Shpg. Price
1-3976-75 3/4˝ dia. x 23/8˝ 3/16˝ 1800 RPM 13-CFL-4 13-CFR-4 1/4˝ 1/4˝-28 1.312˝ 1/4 lb. $ 4.05
1-3976-87 7/8˝ dia. x 23/8˝ 3/16˝ 1800 RPM 13-CFL-5 13-CFR-5 5/16˝ 5/16˝-24 1.375˝ 1/4 lb. $ 4.70
1-3979-87 7/8˝ dia. x 23/8˝ 3/16˝ 2300 RPM 13-CFL-6 13-CFR-6 3/8˝ 3/8˝-24 1.625˝ 1/4 lb. $ 5.65
1-3976-100 1˝ dia. x 23/8˝ 1/4˝ 1800 RPM 13-CFL-7 13-CFR-7 7/16˝ 7/16˝-20 1.812˝ 1/4 lb. $ 6.90
1-3977-100 1˝ dia. x 23/8˝ 1/4˝ 1200 RPM 13-CFL-8 13-CFR-8 1/2˝ 1/2˝-20 2.125˝ 1/2 lb. $ 8.10
1-3978-100 1˝ dia. x 23/8˝ 1/4˝ 3000 RPM 13-CFL-10 13-CFR-10 5/8˝ 5/8˝-18 2.500˝ 1/2 lb. $11.15
3.7˝ Diameter Pulley w/Bearing 13-CFL-12 13-CFR-12 3/4˝ 3/4˝-16 2.875˝ 3/4 lb. $15.20
ITEM Bore Integral Key Engaging Speed 13-CFL-16 13-CFR-16 1˝ 1˝-14 4.125˝ 21/4 lb. $37.80
1-3974-62 5/8˝ dia. x 23/8˝ 3/16˝ 1800 RPM
1-3974-75 3/4˝ dia. x 23/8˝ 3/16˝ 1800 RPM
1-3975-75 3/4˝ dia. x 23/8˝ 3/16˝ 2300 RPM
1-3974-87 7/8˝ dia. x 23/8˝ 3/16˝ 1800 RPM
1-3974-100 1˝ dia. x 23/8˝ 1/4˝ 1800 RPM Male Threaded Rod Ends
1-3975-100 1˝ dia. x 23/8˝ 1/4˝ 2300 RPM Left Hand Right Hand End-To-Center
ITEM ITEM Bore Thread Length Shpg. Price
New, Special Purchase 13-CML-4 13-CMR-4 1/4˝ 1/4˝-28 1.562˝ 1/4 lb. $ 4.05
Rod Ends 13-CML-5 13-CMR-5 5/16˝ 5/16˝-24 1.875˝ 1/4 lb. $ 4.70
13-CML-6 13-CMR-6 3/8˝ 3/8˝-24 1.938˝ 1/4 lb. $ 5.65
Item Style Bore Thread Shpg. Price Male 13-CML-7 13-CMR-7 7/16˝ 7/16˝-20 2.125˝ 1/4 lb. $ 6.90
1-115566 Male 5/16˝ 5/16-24 LH 1/4 lb. $1.95 13-CML-8 13-CMR-8 1/2˝ 1/2˝-20 2.438˝ 1/4 lb. $ 8.10
1-115567 Male 7/16˝ 7/16-20 LH 1/4 lb. $2.95
1-116462* Male 7/16˝ 7/16-20 LH 1/4 lb. $2.95 13-CML-10 13-CMR-10 5/8˝ 5/8˝-18 2.625˝ 1/2 lb. $11.15
* Forged Body 13-CML-12 13-CMR-12 3/4˝ 3/4˝-16 2.875˝ 3/4 lb. $15.20
Female – 13-CMR-16 1˝ 1˝-14 4.125˝ 2 lbs. $37.80
134 Fixed Bore Sprockets 8 www.surpluscenter.com
25 Pitch Roller Chain Sprockets
Roller Chain Sprockets • Brand new ANSI standard sprockets.
Finished, keyed bore with set screw.
• Brand new ANSI standard sprockets. Carbon steel with heat-treated teeth.
Finished, unkeyed bore with two set screws. • Select an ITEM number for sprocket
• Select an ITEM number from chart from chart according to chain pitch,
according to number of teeth and add suffix number of teeth and add suffix letter
letter for bore size. according to bore size.
Example: ITEM 1-2742-10-A is a 25 pitch sprocket Example: ITEM 1-2413-10-A is a 35 pitch sprocket with 10 teeth
with 10 teeth and 1/4˝ bore. and 1/2˝ bore. ITEMS 1-2413-10-AA and 1-2413-11-AA have no keyway.
Finished Bores 35 Pitch
ITEM - Teeth OD 1/4˝ 5/16˝ 3/8˝ 1/2˝ 5/8˝ 3/4˝ Shpg. Price Finished Bores
1-2742-9 0.84˝ A – – – – – 1/8 lb. $3.75 ITEM - Teeth OD 3/8˝ 1/2˝ 5/8˝ 3/4˝ 7/8˝ 1˝ 11/8˝ 13/16˝ 11/4˝ Price
1-2742-10 0.92˝ A – – – – – 1/8 lb. $4.10 1-2413-10 1.38˝ AA A B – – – – – – $4.30
1-2742-11 0.99˝ A B – – – – 1/8 lb. $4.40 1-2413-11 1.50˝ AA A B C – – – – – $4.65
1-2742-12 1.08˝ A B C – – – 1/8 lb. $4.65 1-2413-12 1.63˝ – A B C – – – – $4.90
1-2742-13 1.17˝ A B C – – – 1/8 lb. $4.90 1-2413-13 1.75˝ – A B C – – – – – $4.35
1-2742-14 1.24˝ A B C D – – 1/4 lb. $4.90 1-2413-14 1.87˝ – A B C – – – – – $4.35
1-2742-15 1.33˝ A B C D – – 1/4 lb. $4.30 1-2413-15 1.99˝ – A B C D E – – – $4.55
1-2742-16 1.41˝ A B C D – – 1/4 lb. $4.70 1-2413-16 2.11˝ – A B C D E – – – $4.95
1-2742-17 1.49˝ A B C D E – 1/4 lb. $4.85 1-2413-17 2.23˝ – A B C D E – – – $5.15
1-2742-18 1.57˝ A B C D E F 1/4 lb. $5.25 1-2413-18 2.35˝ – A B C D E – – – $5.55
1-2742-19 1.65˝ A B C D E F 1/4 lb. $5.55 1-2413-19 2.47˝ – A B C – E – – – $5.90
1-2742-20 1.73˝ A B C D E F 1/2 lb. $6.15 1-2413-20 2.59˝ – A B C – E – – – $6.50
1-2742-21 1.81˝ A B C D E F 1/2 lb. $6.80 1-2413-21 2.71˝ – A B C – E – – – $7.20
1-2742-22 1.89˝ A B C D E F 1/2 lb. $7.10 1-2413-22 2.83˝ – A B C – E – – – $7.55
1-2742-23 1.97˝ A B C D E F 1/2 lb. $7.70 1-2413-23 2.95˝ – A B C – E – – – $8.00
1-2742-24 2.05˝ – – C D E F 1/2 lb. $8.00 1-2413-24 3.07˝ – A B C – E – – – $8.45
1-2742-25 2.13˝ – – C D E F 1/2 lb. $8.65 1-2413-25 3.19˝ – A B C – E – – – $8.90
1-2742-26 2.21˝ – – C D – F 1/2 lb. $9.35 1-2413-26 3.31˝ – – B C D E F G H $9.90
1-2742-28 2.37˝ – – C D E F 1/2 lb. $11.10 1-2413-27 3.43˝ – – B C D E F G H $10.85
1-2742-30 2.53˝ – – C D E F 1/2 lb. $12.35 1-2413-28 3.55˝ – – B C D E F G H $11.75
1-2742-32 2.69˝ – – C D E F 3/4 lb. $13.85 1-2413-29 3.68˝ – – B C D E F G H $12.00
1-2742-35 2.94˝ – – C D E F 3/4 lb. $16.50 1-2413-30 3.79˝ – – B C D E F G H $13.10
1-2742-36 3.01˝ – – C D E F 3/4 lb. $16.70 1-2413-32 4.03˝ – – B C D E F G H $14.65
1-2742-40 3.33˝ – – – D E F 11/4 lb. $19.95 1-2413-35 4.39˝ – – B C D E F G H $17.45
1-2742-42 3.51˝ – – – D E F 11/4 lb. $20.35 1-2413-36 4.51˝ – – B C D E F G H $17.70
1-2742-45 3.73˝ – – – D E F 11/4 lb. $21.85 1-2413-40 4.99˝ – – B C D E F G H $20.05
1-2742-48 3.96˝ – – – D E F 11/4 lb. $23.50 1-2413-42 5.23˝ – – B C D E F G H $20.50
1-2742-54 4.44˝ – – – D E F 11/2 lb. $25.50 1-2413-45 5.59˝ – – B C D E F G H $23.05
1-2742-60 4.92˝ – – – D E F 2 lb. $29.55 1-2413-48 5.95˝ – – B C D E F G H $24.90
1-2742-72 5.72˝ – – – D E F 3 lb. $38.00 1-2413-54 6.66˝ – – B C D E F G H $27.00
1-2413-60 7.38˝ – – – C D E F G H $31.20
1-2413-72 8.81˝ – – – C D E F G H $33.60
40 Pitch
Idler Sprockets Finished Bores
• Brand new. Cast steel idler sprockets. ITEM - Teeth OD 1/2˝ 5/8˝ 3/4˝ 7/8˝ 1˝ 11/8˝ 13/16˝ 11/4˝ 13/8˝ 17/16˝ 11/2˝ Price
Sealed ball bearings. 1-2123-10 1.84˝ A B C – – – – – – – – $5.20
1-2123-11 2.00˝ A B C D – – – – – – – $5.45
ITEM Pitch Bore Teeth O.D. Shpg. Price
1-2123-12 2.17˝ A B C D – – – – – – $5.60
1-2408-18-A 35 1/2˝ 18 2.35˝ 1/2 $9.40 1-2123-13 2.33˝ A B C D E – – – – – – $5.75
1-2408-18-B 35 5/8˝ 18 2.35˝ 1/2 $9.40 1-2123-14 2.49˝ A B C D E F G – – – – $6.10
1-2409-17-A 40 1/2˝ 17 2.98˝ 11/4 $12.00 1-2123-15 2.65˝ A B C D E F G H – – – $7.40
1-2409-17-B 40 5/8˝ 17 2.98˝ 11/4 $12.00 1-2123-16 2.81˝ – B C D E F G H – – – $7.80
1-2410-13-A 50 1/2˝ 13 2.91˝ 11/4 $12.25 1-2123-17 2.98˝ – B C D E F G H – – – $8.40
1-2410-13-B 50 5/8˝ 13 2.91˝ 11/4 $12.25 1-2123-18 3.14˝ – B C D E F G H I J K $9.15
1-2410-15-A 50 1/2˝ 15 3.32˝ 13/4 $13.25 1-2123-19 3.30˝ – B C D E F G H I J K $9.55
1-2410-15-B 50 5/8˝ 15 3.32˝ 13/4 $13.25 1-2123-20 3.46˝ – B C D E F G H I J K $10.15
1-2410-17-A 50 1/2˝ 17 3.72˝ 2 $13.60 1-2123-21 3.62˝ – B C – E F G H I J K $10.55
1-2123-22 3.78˝ – B C D E F G H I J – $11.10
1-2410-17-B 50 5/8˝ 17 3.72˝ 2 $13.60
1-2123-23 3.94˝ – B C D E F G H I J K $11.65
1-2411-11-A 60 1/2˝ 11 3.00˝ 11/4 $13.25 1-2123-24 4.10˝ – B C D E F G H I J K $12.70
1-2411-11-B 60 5/8˝ 11 3.00˝ 11/4 $13.25 1-2123-25 4.26˝ – – C D E F G H – J K $13.70
1-2411-13-A 60 1/2˝ 13 3.49˝ 13/4 $14.10 1-2123-26 4.42˝ – – C D E F G H – J K $14.10
1-2411-13-B 60 5/8˝ 13 3.49˝ 13/4 $14.10 1-2123-27 4.58˝ – – C D E F G H – – K $14.35
1-2411-15-A 60 1/2˝ 15 3.98˝ 3 $15.80 1-2123-28 4.74˝ – – C D E F G H – J K $14.95
1-2411-15-B 60 5/8˝ 15 3.98˝ 3 $15.80 1-2123-29 4.90˝ – – C D E F G H – – K $16.15
1-2412-11-C 80 3/4˝ 11 4.01˝ 3 $21.90 1-2123-30 5.06˝ – – C D E F G H – – K $16.70
1-2412-12-C 80 3/4˝ 12 4.33˝ 4 $22.65 Shipping Weights
1-2412-12-E 80 1˝ 12 4.33˝ 4 $22.65 10-15 Teeth 1 lb. 16-25 Teeth 2 lbs. 26-72 Teeth 3 lbs.
& 800-488-3407 Roller Chain Sprockets & Rotary Cutter Boxes 135
Roller Chain Sprockets RC-145L
• Brand new ANSI standard sprockets. Finished keyed bore with
set screw. Carbon steel with heat-treated teeth. Rotary
• Select an ITEM number for sprocket from chart according to chain
pitch, number of teeth and add suffix letter according to bore size.
Cutter
Example: ITEM 1-2124-10-C = 50 pitch sprocket, 10 teeth, 3/4˝ bore. Gearboxes
50 Pitch • New, OMNI GEAR series
Finished Bores RC-145L right angle rotary
ITEM - Teeth OD 5/8˝ 3/4˝ 7/8˝ 1˝ 11/8˝ 13/16˝ 11/4˝ 13/8˝ 17/16˝ 11/2˝ 15/8˝ Shpg. Price cutter gearboxes. Horizon-
tal input and vertical output
1-2124-10 2.30˝ B C D E – – – – – – – 3/4 lb. $7.35 downward. Bevel gears.
1-2124-11 2.50˝ B C D E – – – – – – – 1 lb. $7.75 Large deep groove ball bear-
1-2124-12 2.71˝ B C D E F G H – – – – 1 lb. $8.10 ings to support output. Some
1-2124-13 2.91˝ B C D E F G H – – – – 11/4 lb. $8.60 items include blade adapter.
1-2124-14 3.11˝ B C D E F G H – – – – 11/2 lb. $8.95 See below for details.
1-2124-15 3.32˝ B C D E F G H I J K – 13/4 lb. $9.25 SPECIFICATIONS threaded end. 31/4˝ total
1-2124-16 3.52˝ B C D E F G H I J K – 2 lb. $10.70 • Input RPM: 540/1000 length
1-2124-17 3.72˝ B C D E F G H I J K – 2 lb. $11.25 • Input HP: 61-171 • Mount : 6 holes on 8˝ dia.
1-2124-18 3.92˝ B C D E F G H I J K – 3 lb. $11.80 • Max Torque: 7117-19950 B.C.
in.lbs. • Mounting flange :10.2˝ dia.
1-2124-19 4.12˝ B C D E F G H I J K L 3 lb. $12.35
• Input Shaft: 13/4˝ dia. x 31/2˝• Centerline Distance 8.9˝
1-2124-20 4.32˝ – – D E F G H I J K – 3 lb. $13.00 long 20T spline (input shaft to mounting
1-2124-21 4.52˝ – C D E F G H I J K – 3 lb. $13.55 • Pilot: 55/8˝ dia. surface)
1-2124-22 4.72˝ – C D E F G H I J K – 3 lb. $13.95 • Output Shaft :21/4˝ dia. 18 • Size :141/2˝ x 11˝ x 11˝
1-2124-23 4.92˝ – C D E F G H I J K – 3 lb. $14.55 tooth tapered spline w/ • Actual weight 135 lbs.
1-2124-24 5.12˝ – C D E F G H I J K – 4 lb. $17.15 Truck freight only.
Agricultural Chain
Ultimate 10 Ft. Box Connecting Link Offset (half) Link
Pitch (Size) Strength ITEM Shpg. Price ITEM Shpg. Price ITEM Shpg. Price
A2040 ( 1˝ ) 3700 lbs. 1-2653-A2040 4 lbs. $17.25 1-2657-A2040 0.1 lb. $0.65 1-2658-A2040 0.1 lb. $1.15
A2050 ( 11/4˝ ) 6100 lbs. 1-2653-A2050 6 lbs. $24.30 1-2657-A2050 0.1 lb. $0.90 1-2658-A2050 0.1 lb. $1.65
A2060 ( 11/2˝ ) 8500 lbs. 1-2653-A2060 8 lbs. $32.55 1-2657-A2060 0.1 lb. $1.20 1-2658-A2060 0.1 lb. $1.90
Conveyor Chain
Ultimate 10 Ft. Box Connecting Link Offset (half) Link
Pitch (Size) Strength ITEM Shpg. Price ITEM Shpg. Price ITEM Shpg. Price
C2040 ( 1˝ ) 3700 lbs. 1-2652-C2040 5 lbs. $13.75 1-2654-C2040 0.2 lb. $0.50 1-2656-C2040 0.1 lb. $0.90
C2050 ( 11/4˝ ) 6100 lbs. 1-2652-C2050 7 lbs. $19.80 1-2654-C2050 0.2 lb. $0.80 1-2656-C2050 0.1 lb. $1.15
C2060H ( 11/2˝ ) 8500 lbs. 1-2652-C2060-H 12 lbs. $30.60 1-2654-C2060-H 0.25 lb. $1.55 1-2656-C2060-H 0.1 lb. $2.95
C2062H ( 11/2˝ ) 8500 lbs. 1-2652-C2062-H 17 lbs. $44.70 1-2654-C2062-H 0.25 lb. $1.00 1-2656-C2062-H 0.1 lb. $1.90
C2080H ( 2˝ ) 1,4500 lbs. 1-2652-C2080-H 19 lbs. $54.15 1-2654-C2080-H 0.3 lb. $2.65 1-2656-C2080-H 0.2 lb. $3.75
C2082H ( 2˝ ) 1,4500 lbs. 1-2652-C2082-H 26 lbs. $72.75 1-2654-C2082-H 0.3 lb. $2.65 1-2656-C2082-H 0.2 lb. $3.75
138 Shaft Collars & PTO Shafts 8 www.surpluscenter.com
Steel Shaft Collars
• Brand new. Solid collars include a set screw, split collars include clamping screws.
Choose from three collar styles.
Solid Single Split Double Split
Shaft Shaft Shaft
Collars Collars Collars
Zinc Plated Black Oxide Finish Black Oxide Finish
ITEM Bore O.D. Width Price ITEM Bore O.D. Width Price ITEM Bore O.D. Width Price Shpg.
1-2766-18 3/16˝ 7/16˝ 1/4˝ $0.80 1-2767-18 3/16˝ 5/8˝ 5/16˝ $3.70 1-2768-18 3/16˝ 5/8˝ 5/16˝ $4.95 0.1 lb.
1-2766-25 1/4˝ 1/2˝ 5/16˝ $0.90 1-2767-25 1/4˝ 11/16˝ 5/16˝ $3.70 1-2768-25 1/4˝ 11/16˝ 5/16˝ $4.95 0.1 lb.
1-2766-31 5/16˝ 5/8˝ 5/16˝ $1.10 1-2767-31 5/16˝ 11/16˝ 5/16˝ $3.70 1-2768-31 5/16˝ 11/16˝ 5/16˝ $4.95 0.1 lb.
1-2766-37 3/8˝ 3/4˝ 3/8˝ $1.25 1-2767-37 3/8˝ 7/8˝ 11/32˝ $3.85 1-2768-37 3/8˝ 7/8˝ 11/32˝ $5.10 0.1 lb.
1-2766-43 7/16˝ 7/8˝ 7/16˝ $1.40 1-2767-43 7/16˝ 15/16˝ 3/8˝ $3.85 1-2768-43 7/16˝ 15/16˝ 3/8˝ $5.20 0.1 lb.
1-2766-50 1/2˝ 1˝ 7/16˝ $1.65 1-2767-50 1/2˝ 11/8˝ 13/32˝ $4.15 1-2768-50 1/2˝ 11/8˝ 13/32˝ $5.40 0.1 lb.
1-2766-62 5/8˝ 11/8˝ 1/2˝ $1.70 1-2767-62 5/8˝ 15/16˝ 7/16˝ $4.60 1-2768-62 5/8˝ 15/16˝ 7/16˝ $5.80 0.1 lb.
1-2766-75 3/4˝ 11/4˝ 9/16˝ $2.05 1-2767-75 3/4˝ 11/2˝ 1/2˝ $4.95 1-2768-75 3/4˝ 11/2˝ 1/2˝ $6.15 0.1 lb.
1-2766-87 7/8˝ 11/2˝ 9/16˝ $2.45 1-2767-87 7/8˝ 15/8˝ 1/2˝ $4.55 1-2768-87 7/8˝ 15/8˝ 1/2˝ $6.45 0.2 lb.
1-2766-93 15/16˝ 11/2˝ 9/16˝ $2.45 1-2767-93 15/16˝ 13/4˝ 1/2˝ $5.20 1-2768-93 15/16˝ 13/4˝ 1/2˝ $7.10 0.2 lb.
1-2766-100 1˝ 15/8˝ 5/8˝ $2.55 1-2767-100 1˝ 13/4˝ 1/2˝ $5.20 1-2768-100 1˝ 13/4˝ 1/2˝ $7.10 0.3 lb.
1-2766-112 11/8˝ 13/4˝ 5/8˝ $2.95 1-2767-112 11/8˝ 17/8˝ 1/2˝ $5.20 1-2768-112 11/8˝ 17/8˝ 1/2˝ $7.10 0.4 lb.
1-2766-118 13/16˝ 2˝ 11/16˝ $3.75 1-2767-118 13/16˝ 21/16˝ 1/2˝ $5.50 1-2768-118 13/16˝ 21/16˝ 1/2˝ $7.45 0.4 lb.
1-2766-125 11/4˝ 2˝ 11/16˝ $3.75 1-2767-125 11/4˝ 21/16˝ 1/2˝ $5.50 1-2768-125 11/4˝ 21/16˝ 1/2˝ $7.45 0.5 lb.
1-2766-137 13/8˝ 21/8˝ 3/4˝ $4.35 1-2767-137 13/8˝ 21/4˝ 9/16˝ $6.15 1-2768-137 13/8˝ 21/4˝ 9/16˝ $8.10 0.6 lb.
1-2766-143 17/16˝ 21/4˝ 3/4˝ $4.35 1-2767-143 17/16˝ 21/4˝ 9/16˝ $6.15 1-2768-143 17/16˝ 21/4˝ 9/16˝ $8.10 0.6 lb.
1-2766-150 11/2˝ 21/4˝ 3/4˝ $4.35 1-2767-150 11/2˝ 23/8˝ 9/16˝ $6.55 1-2768-150 11/2˝ 23/8˝ 9/16˝ $8.50 0.6 lb.
1-2766-162 15/8˝ 21/2˝ 13/16˝ $4.60 1-2767-162 15/8˝ 25/8˝ 11/16˝ $7.90 1-2768-162 15/8˝ 25/8˝ 11/16˝ $9.75 0.7 lb.
1-2766-168 111/16˝ 21/2˝ 13/16˝ $4.60 1-2767-168 111/16˝ 23/4˝ 11/16˝ $8.65 1-2768-168 111/16˝ 23/4˝ 11/16˝ $10.60 0.7 lb.
1-2766-175 13/4˝ 23/4˝ 7/8˝ $5.90 1-2767-175 13/4˝ 23/4˝ 11/16˝ $8.65 1-2768-175 13/4˝ 23/4˝ 11/16˝ $10.60 0.8 lb.
1-2766-187 17/8˝ 23/4˝ 7/8˝ $5.90 1-2767-187 17/8˝ 27/8˝ 11/16˝ $8.65 1-2768-187 17/8˝ 27/8˝ 11/16˝ $10.60 0.8 lb.
1-2766-193 115/16˝ 3˝ 7/8˝ $6.55 1-2767-193 115/16˝ 3˝ 11/16˝ $9.35 1-2768-193 115/16˝ 3˝ 11/16˝ $11.40 0.9 lb.
1-2766-200 2˝ 3˝ 7/8˝ $6.55 1-2767-200 2˝ 3˝ 11/16˝ $9.35 1-2768-200 2˝ 3˝ 11/16˝ $11.40 0.9 lb.
3/4-16 PTO Shaft 3 Point
Swivel Eye Ratchet
Rod End Jack
ITEM 1-3778
$10.95 63 HP, 33.25˝ ITEM 1-3964 $32.99
• New, BULLDOG model 690058 ratchet
• New, Radial Bearing Corporation Model
RF-12TH high strength precision swivel ITEM 1-3720-A $99.99 jack to adjust 3 point hitch on tractors.
Plated clevis ends (no pins). Grease zerks
eye rod end. Chrome moly ball with Teflon • New BUSH HOG Model 50041190 fixed
length PTO shaft. Plastic shaft and joint for threads.
fabric liner, steel housing. SPECIFICATIONS • Clevis Inner width 11/16˝
SPECIFICATIONS • Misalignment angle shielding. • Travel 3˝ • Handle 10˝
• Body: 14° max. SPECIFICATIONS • End 1: 13/8-6T slide collar • Load Capacity 16,000 lbs. • Thread Size 11/8˝-5 ACME
female right hand thread • Thread size 3/4-16 • Power 63 HP at 540 RPM • End 2: 13/8-21T w/ int. bolt tension • Retracted Length 15˝
• Swivel eye bore 3/4˝ diam. • End to center 2.875˝ • Series/Category T60 • Shaft nominal dia. • Clevis Pin Holes 1˝ • Shpg. 12 lbs.
• Length thru bore 7/8˝ • Wrench flat 1˝ • Lgth. end-to-end min. 33.25˝ 1.77˝ inner, 2.126˝ outer
• Max. statis load 28,081 lbs. • Shpg. 1 lb. • Shaft Type Tri-Lobe • Shpg. 32 lbs. 60 HP 540 RPM PTO Shaft
Steel Square Key Stock
• Brand new, steel key stock. Use with motors, engines, gear reducers,
shafting. One foot length can be cut to get the exact size needed. ITEM 1-5507 $59.95
ITEM Size Length Shpg. Price • New surplus, Waltersheid W-2300-
2507-0815 PTO shaft w/ quick discon-
1-5030-18-A 3/16˝ 11/4˝ 1/10 lb. $0.80 nects on each end.
1-5030-18-B 3/16˝ 12˝ 1/4 lb. $3.00 SPECIFICATIONS
• Power 60 HP @ 540 RPM disconnect
1-5030-25-A 1/4˝ 11/2˝ 1/10 lb. $1.00 • Speed 540 RPM Cross Width 2.925˝
1-5030-25-B 1/4˝ 12˝ 1/4 lb. $4.00 • Series/Category ASAE Cap Diam. 1.062˝
1-5030-31-A 5/16˝ 11/2˝ 1/10 lb. $1.10 • Length: End to End Min. 23˝ Driven End:Connector
Center-of-Cross to Center- Type 13/8˝ dia. 6T w/quick
1-5030-31-B 5/16˝ 12˝ 1/2 lb. $6.00 of-Cross Min. 141/4˝ disconnect
End to End Max. 29˝ Cross Width 2.925˝
1-5030-38-A 3/8˝ 15/8˝ 1/10 lb. $1.35
Center-of-Cross to Center- Cap dia. 1.062˝
1-5030-38-B 3/8˝ 12˝ 3/4 lb. $7.00 of-Cross Max. 221/2˝ • Class 3
1-5030-50-A 1/2˝ 17/8˝ 1/5 lb. $1.95 • End Mountings: Drive • Shaft Type Square shaft
End:Connector Type*** • Shaft Nominal Dia. 1˝
1-5030-50-B 1/2˝ 12˝ 1 lb. $10.00 13/8˝ dia. 6T w/ quick • Shpg. 26 lbs.
& 800-488-3407 Shafting, Lead Screws & U-joints 139
Keyed Shafting Square Shaft
ITEM 1-3524
• Brand new. 36˝ or 72˝ lengths of C1018
cold-drawn steel, full length keyway. $45.40
• Brand new, square shafting. Driveline
3 ft. Lengths 6 ft. Lengths shafting grade steel.
O.D. Keyway ITEM Shpg. Price ITEM Shpg. Price SPECIFICATIONS • Length 72˝
1/2˝ 1/8˝ x 1/16˝ 1-2982-50-3 3 lbs. $18.60 1-2982-50-6 6 lbs. $35.35 • Size 7/8˝ square • Shpg. 17 lbs.
5/8˝ 3/16˝ x 3/32˝ 1-2982-62-3 4 lbs. $20.65 1-2982-62-6 8 lbs. $35.95 Hex
3/4˝ 3/16˝ x 3/32˝ 1-2982-75-3 6 lbs. $24.60 1-2982-75-6 12 lbs. $36.90
7/8˝ 3/16˝ x 3/32˝ 1-2982-87-3 7 lbs. $31.00 1-2982-87-6 14 lbs. $45.45
Shafting
1˝ 1/4˝ x 1/8˝ 1-2982-100-3 9 lbs. $30.85 1-2982-100-6 18 lbs. $46.25 • Brand new, hex shafting. Driveline
11/8˝ 1/4˝ x 1/8˝ 1-2982-112-3 12 lbs. $36.80 1-2982-112-6 24 lbs. $55.25 shafting grade steel.
11/4˝ 1/4˝ x 1/8˝ 1-2982-125-A-3 14 lbs. $38.95 1-2982-125-A-6 28 lbs. $65.80 Hex
11/4˝ 5/16˝ x 1/8˝ 1-2982-125-B-3 14 lbs. $39.85 1-2982-125-B-6 28 lbs. $85.30 ITEM Size Lgth. Shpg. Price
13/8˝ 5/16˝ x 5/32˝ 1-2982-137-3 16 lbs. $38.70 1-2982-137-6 32 lbs. $77.40 1-3525-87 7/8˝ 72˝ 14 lbs. $25.20
11/2˝ 3/8˝ x 3/16˝ 1-2982-150-3 19 lbs. $45.35 1-2982-150-6 38 lbs. $90.70 1-3525-112 11/8˝ 72˝ 23 lbs. $52.30
Splined Shafts
6T 14T 15T 20T 21T
Universal Joints
• Brand new. Cold-formed, carbon steel yokes.
Grease zerk for the bearings.
HP at Yoke Width
ITEM Bore Series Bearings Cross Dia 540 RPM 1000 RPM Inside Outside Size Shpg Price
1-2728 1˝ 4P Journal 7/8˝ 5 9 123/64˝ 17/8˝ 47/8˝ x 2˝ x 2˝ 4 lbs. $30.75
1-2729 3/4˝ 6N Needle 31/32˝ 12 22 17/16˝ 21/4˝ 5˝ x 21/4˝ x 21/4˝ 4 lbs. $37.35
1-2730 1˝ 6N Needle 31/32˝ 12 22 17/16˝ 21/4˝ 5˝ x 21/4˝ x 21/4˝ 5 lbs. $37.35
1-2731 1˝ 12N Needle 11/16˝ 28 52 113/16˝ 21/2˝ 7˝ x 27/8˝ x 27/8˝ 6 lbs. $55.25
1-2732 11/4˝ 12N Needle 11/16˝ 28 52 113/16˝ 21/2˝ 7˝ x 27/8˝ x 27/8˝ 6 lbs. $55.25
140 Flexible & Spline Couplings 8 www.surpluscenter.com
3 Piece Flexible & Spline Couplings
• Brand new, 3-piece flexible couplings. Use to connect engines or electric motors to pumps, gear
reducers, drive shafts. Purchase two halves and one flexible insert to make a complete coupling. Inserts
are available in either rubber or urethane construction. Urethane gives longer life and 50% greater torque
handling capability. Splined halves are available for use with hydraulic pumps.
• Interchangeable with L Series jaw couplings from Lovejoy, Browning and others.
• Some series can be interchanged to reduce overall length. Series Interchangeablity:
L-090 with L-095 coupled length will be 25/16˝ L-099 with L-100 coupled length will be 33/16˝
Example:
A complete coupling for 10 HP at 3600 RPM coupling a 1/2˝ dia. shaft and a 5/8˝ 9 tooth splined shaft. Complete Coupler
Order one each of
1-3421-E (L-095 Series 1/2˝ bore keyed coupling half)
1-3421-9 (L-095 Series 5/8˝ 9 tooth splined coupling half)
1-3421-X (L-095 Series rubber insert)
Inserts for 3 Piece Couplings L-050 Series L-075 thru L-110 Series
Coupling Rubber Inserts Urethane Inserts
Series ITEM Shpg. Price ITEM Shpg. Price Performance Ratings with Rubber Insert
Coupling Rated HP Rating Based on Speed (RPM) Coupling Coupled
L-050 1-3419-X 1/10 $1.90
Series Torque (in-lbs.) 100 300 1200 1800 3600 O.D. Length
L-070 1-3614-X 1/10 $2.45 L-050 28 0.04 0.12 0.48 0.72 1.44 15/64˝ 123/32˝
L-075 1-3420-X 1/10 $3.55 1-3420-UR 1/10 $12.45 L-070 37 0.06 0.18 0.72 1.08 2.16 13/8˝ 2˝
L-090 1-3615-X 1/10 $3.85 1-3615-UR 1/10 $15.40 L-075 73 0.12 0.36 1.44 2.16 4.32 13/4˝ 21/8˝
L-095 1-3421-X 1/10 $3.85 1-3421-UR 1/10 $15.40 L-090 126 0.20 0.60 2.40 3.60 7.20 21/8˝ 211/32˝
L-095 169 0.28 0.84 3.36 5.04 10.08 27/64˝ 21/2˝
L-099 1-3616-X 1/10 $6.55 1-3616-UR 1/10 $20.95 L-099 260 0.42 1.26 5.04 7.56 15.10 217/32˝ 27/8˝
L-100 1-3422-X 1/10 $6.55 1-3422-UR 1/10 $21.40 L-100 370 0.60 1.80 7.20 10.80 21.60 217/32˝ 31/2˝
L-110 1-3423-X 1/4 $10.80 L-110 680 1.10 3.30 13.20 19.80 39.60 35/16˝ 47/32˝
Bore Sizes - Choose ITEM number suffix letter based on bore size required. Splined bores have numeric suffix.
Flexible Coupling Halves Splined Coupling Halves Per
Coupling ITEM Bore Sizes Per Half 9 Tooth 11 Tooth 13 Tooth Per Half Half
Series Prefix 1/4˝ 5/16˝ 3/8˝ 7/16˝ 1/2˝ 9/16˝ 5/8˝ 5/8˝ 3/4˝ 7/8˝ 15/16˝ 1˝ 11/8˝ 11/4˝ 13/8˝ 17/16˝ 11/2˝ 15/8˝ Price 5/8˝ 3/4˝ 7/8˝ Price Shpg.
L-050 1-3419 A B C D E - G - - - - - - - - - - $3.95 1/2
L-070 1-3614 - - - - E - G - H - - - - - - - - $5.10 3/4
L-075 1-3420 H J - - - - - - - $5.65
- - - D E - G G-156 3/4
L-090 1-3615 - - - - E - G - - - - - - - - - - $6.90 9 11 13 $20.25 1
L-095 1-3421 H J K M N - - - - $8.70
- - - D E F G G-156 9 11 13 $20.25 1
L-099 1-3616 H J - M N O - - - $12.75
- - - - E - G G-156 9 11 13 $26.25 2
L-100 1-3422 H J K M N O P - - $14.50
- - - - E F G G-156 9 11 13 $27.00 2
L-110 1-3423 - - - - - - G - H J - M N O P Q R S $23.55 9 11 13 $42.00 5
G-156 has special 5/32˝ keyway
• Select an ITEM number for pulley from chart according to outside diameter and add suffix letter according to bore size.
Idler
Pulleys Belt
Flat Belt Pressed V-Belt Pressed V-Belt Solid ITEM OD Bore Type Shpg. Price
• Use to provide tension on belts. All 3 V-Belt Pressed Steel Style 1-5107 2.95˝ 7/8˝ 5/8˝ 3 lbs. $5.95
styles have extended inner race precision SPECIFICATIONS 1-2540 61/2˝ 17/16˝ 3/8˝ 6 lbs. $7.95
ball bearing hubs. • Outside dia. 5˝ • Hub width 11/16˝ 1-995-B 13/4˝ 1/2˝ 3/8˝ 1/2 lb. $3.95
• Belt size A (1/2˝) or B (5/8˝) • Shpg. 2 lbs.
Flat Belt Pressed Steel Style
SPECIFICATIONS • Hub width 11/16˝ ITEM 1-3745-A 1/2˝ bore hub $15.65 51/2˝ Dia. Single
• Outside dia. 31/4˝ • Groove dia. 23/4˝
• Groove width 13/16˝ • Shpg. 1 lb. ITEM 1-3745-B 5/8˝ bore hub $16.55 Groove Pulley
ITEM 1-4678
ITEM 1-3743-A 1/2˝ bore hub $15.30 V-Belt Solid Steel Style $4.95
ITEM 1-3743-B 5/8˝ bore hub $15.30 SPECIFICATIONS
• Outside dia. 4˝ • Hub bore 1/2˝ • Shpg. 3 lbs.
• New, single groove, steel pulley with
SPECIFICATIONS • Hub width 11/16˝ keyway (not drilled for setscrew). Ideal for
• Outside dia. 41/2˝ • Groove dia. 4˝ ITEM 1-3746-A $23.65 mounting on small engine crankshaft.
• Groove width 13/16˝ • Shpg. 1 lb. • For A (1/2˝) belts, 11/16˝ hub width SPECIFICATIONS
ITEM 1-3744-A 1/2˝ bore hub $16.55 ITEM 1-3746-B $26.90
• Outside dia. 51/2˝ • Length thru bore 17/8˝
• Belt type A (1/2˝) • Hub offset 1/2˝
ITEM 1-3744-B 5/8˝ bore hub $16.55 • For B (5/8˝) belts, 13/16˝ hub width • Bore 11/8˝ dia. w/1/4˝ keyway • Shpg. 2 lbs.
144 1/2˝ V-Belts California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov 8 www.surpluscenter.com
A (1/2˝) V-Belts ▲
!
• Brand new, BESTORQ classic profile V-belts. Highly oil and heat resistant. Wrapped construction.
Outside length is the outer circumference of the belt. These belts exceed RMA published ratings.
Outside Outside Outside
ITEM Model Lgth. Shpg. Price ITEM Model Lgth. Shpg. Price ITEM Model Lgth. Shpg. Price
13-A14 A14 or 4L160 16 1/2 lb. $2.25 13-A46 A46 or 4L480 48 3/4 lb. $5.60 13-A78 A78 or 4L800 80 3/4 lb. $9.15
13-A15 A15 or 4L170 17 1/2 lb. $2.33 13-A47 A47 or 4L490 49 3/4 lb. $5.70 13-A79 A79 or 4L810 81 3/4 lb. $9.25
13-A16 A16 or 4L180 18 1/2 lb. $2.40 13-A48 A48 or 4L500 50 3/4 lb. $5.83 13-A80 A80 or 4L820 82 3/4 lb. $9.38
13-A17 A17 or 4L190 19 1/2 lb. $2.50 13-A49 A49 or 4L510 51 3/4 lb. $5.93 13-A81 A81 or 4L830 83 3/4 lb. $9.48
13-A18 A18 or 4L200 20 1/2 lb. $2.60 13-A50 A50 or 4L520 52 3/4 lb. $6.05 13-A82 A82 or 4L840 84 3/4 lb. $9.60
13-A19 A19 or 4L210 21 1/2 lb. $2.70 13-A51 A51 or 4L530 53 3/4 lb. $6.15 13-A83 A83 or 4L850 85 3/4 lb. $9.70
13-A20 A20 or 4L220 22 1/2 lb. $2.80 13-A52 A52 or 4L540 54 3/4 lb. $6.25 13-A84 A84 or 4L860 86 3/4 lb. $9.83
13-A21 A21 or 4L230 23 1/2 lb. $2.90 13-A53 A53 or 4L550 55 3/4 lb. $6.38 13-A85 A85 or 4L870 87 3/4 lb. $9.93
13-A22 A22 or 4L240 24 1/2 lb. $3.00 13-A54 A54 or 4L560 56 3/4 lb. $6.48 13-A86 A86 or 4L880 88 3/4 lb. $10.03
13-A23 A23 or 4L250 25 1/2 lb. $3.10 13-A55 A55 or 4L570 57 3/4 lb. $6.60 13-A87 A87 or 4L890 89 3/4 lb. $10.15
13-A24 A24 or 4L260 26 1/2 lb. $3.20 13-A56 A56 or 4L580 58 3/4 lb. $6.70 13-A88 A88 or 4L900 90 3/4 lb. $10.25
13-A25 A25 or 4L270 27 1/2 lb. $3.30 13-A57 A57 or 4L590 59 3/4 lb. $6.83 13-A89 A89 or 4L910 91 3/4 lb. $10.38
13-A26 A26 or 4L280 28 1/2 lb. $3.43 13-A58 A58 or 4L600 60 3/4 lb. $6.93 13-A90 A90 or 4L920 92 3/4 lb. $10.48
13-A27 A27 or 4L290 29 1/2 lb. $3.53 13-A59 A59 or 4L610 61 3/4 lb. $7.03 13-A91 A91 or 4L930 93 1 lb. $10.60
13-A28 A28 or 4L300 30 1/2 lb. $3.63 13-A60 A60 or 4L620 62 3/4 lb. $7.15 13-A92 A92 or 4L940 94 1 lb. $10.70
13-A29 A29 or 4L310 31 1/2 lb. $3.73 13-A61 A61 or 4L630 63 3/4 lb. $7.25 13-A93 A93 or 4L950 95 1 lb. $10.83
13-A30 A30 or 4L320 32 1/2 lb. $3.85 13-A62 A62 or 4L640 64 3/4 lb. $7.38 13-A94 A94 or 4L960 96 1 lb. $10.93
13-A31 A31 or 4L330 33 1/2 lb. $3.95 13-A63 A63 or 4L650 65 3/4 lb. $7.48 13-A95 A95 or 4L970 97 1 lb. $11.05
13-A32 A32 or 4L340 34 1/2 lb. $4.05 13-A64 A64 or 4L660 66 3/4 lb. $7.60 13-A96 A96 or 4L980 98 1 lb. $11.15
13-A33 A33 or 4L350 35 1/2 lb. $4.18 13-A65 A65 or 4L670 67 3/4 lb. $7.70 13-A97 A97 or 4L990 99 1 lb. $11.25
13-A34 A34 or 4L360 36 1/2 lb. $4.28 13-A66 A66 or 4L680 68 3/4 lb. $7.80 13-A98 A98 or 4L1000 100 1 lb. $11.38
13-A35 A35 or 4L370 37 1/2 lb. $4.40 13-A67 A67 or 4L690 69 3/4 lb. $7.93 13-A99 A99 101 1 lb. $11.48
13-A36 A36 or 4L380 38 1/2 lb. $4.50 13-A68 A68 or 4L700 70 3/4 lb. $8.03 13-A100 A100 102 1 lb. $11.60
13-A37 A37 or 4L390 39 1/2 lb. $4.60 13-A69 A69 or 4L710 71 3/4 lb. $8.15 13-A103 A103 105 1 lb. $11.93
13-A38 A38 or 4L400 40 1/2 lb. $4.73 13-A70 A70 or 4L720 72 3/4 lb. $8.25 13-A105 A105 107 1 lb. $12.15
13-A39 A39 or 4L410 41 1/2 lb. $4.83 13-A71 A71 or 4L730 73 3/4 lb. $8.38 13-A110 A110 112 1 lb. $12.70
13-A40 A40 or 4L420 42 1/2 lb. $4.93 13-A72 A72 or 4L740 74 3/4 lb. $8.48 13-A112 A112 114 1 lb. $12.93
13-A41 A41 or 4L430 43 1/2 lb. $5.05 13-A73 A73 or 4L750 75 3/4 lb. $8.60 13-A116 A116 118 1 lb. $13.38
13-A42 A42 or 4L440 44 1/2 lb. $5.15 13-A74 A74 or 4L760 76 3/4 lb. $8.70 13-A120 A120 122 1 lb. $13.83
13-A43 A43 or 4L450 45 1/2 lb. $5.28 13-A75 A75 or 4L770 77 3/4 lb. $8.80 13-A126 A126 128 2 lbs. $14.50
13-A44 A44 or 4L460 46 1/2 lb. $5.38 13-A76 A76 or 4L780 78 3/4 lb. $8.93 13-A128 A128 130 2 lbs. $14.73
13-A45 A45 or 4L470 47 3/4 lb. $5.48 13-A77 A77 or 4L790 79 3/4 lb. $9.03 13-A136 A136 138 2 lbs. $15.60
• Brand new, BESTORQ classic profile V-belts. Highly oil and heat resistant. Wrapped construction.
Outside length is the outer circumference of the belt. These belts exceed RMA published ratings.
Outside Outside Outside
ITEM Model Lgth. Shpg. Price ITEM Model Lgth. Shpg. Price ITEM Model Lgth. Shpg. Price
13-B20 B20 or 5L230 23 1/2 lb. $3.80 13-B54 B54 or 5L570 57 3/4 lb. $8.68 13-B88 B88 or 5L910 91 11/4 lb. $13.65
13-B21 B21 or 5L240 24 1/2 lb. $3.95 13-B55 B55 or 5L580 58 1 lb. $8.83 13-B89 B89 or 5L920 92 11/4 lb. $13.80
13-B22 B22 or 5L250 25 1/2 lb. $4.08 13-B56 B56 or 5L590 59 1 lb. $8.98 13-B90 B90 or 5L930 93 11/4 lb. $13.95
13-B23 B23 or 5L260 26 1/2 lb. $4.23 13-B57 B57 or 5L600 60 1 lb. $9.13 13-B91 B91 or 5L940 94 11/4 lb. $14.10
13-B24 B24 or 5L270 27 1/2 lb. $4.35 13-B58 B58 or 5L610 61 1 lb. $9.28 13-B92 B92 or 5L950 95 11/4 lb. $14.25
13-B25 B25 or 5L280 28 1/2 lb. $4.50 13-B59 B59 or 5L620 62 1 lb. $9.40 13-B93 B93 or 5L960 96 11/2 lb. $14.40
13-B26 B26 or 5L290 29 3/4 lb. $4.65 13-B60 B60 or 5L630 63 1 lb. $9.55 13-B94 B94 or 5L970 97 11/2 lb. $14.53
13-B27 B27 or 5L300 30 3/4 lb. $4.78 13-B61 B61 or 5L640 64 1 lb. $9.70 13-B95 B95 or 5L980 98 11/2 lb. $14.68
13-B28 B28 or 5L310 31 3/4 lb. $4.93 13-B62 B62 or 5L650 65 1 lb. $9.85 13-B96 B96 or 5L990 99 11/2 lb. $14.83
13-B29 B29 or 5L320 32 3/4 lb. $5.08 13-B63 B63 or 5L660 66 1 lb. $10.00 13-B97 B97 or 5L1000 100 11/2 lb. $14.98
13-B30 B30 or 5L330 33 3/4 lb. $5.20 13-B64 B64 or 5L670 67 1 lb. $10.15 13-B99 B99 102 11/2 lb. $15.28
13-B31 B31 or 5L340 34 3/4 lb. $5.35 13-B65 B65 or 5L680 68 1 lb. $10.30 13-B100 B100 103 11/2 lb. $15.43
13-B32 B32 or 5L350 35 3/4 lb. $5.50 13-B66 B66 or 5L690 69 1 lb. $10.43 13-B101 B101 104 11/2 lb. $15.58
13-B33 B33 or 5L360 36 3/4 lb. $5.63 13-B67 B67 or 5L700 70 1 lb. $10.58 13-B102 B102 105 11/2 lb. $15.70
13-B34 B34 or 5L370 37 3/4 lb. $5.78 13-B68 B68 or 5L710 71 1 lb. $10.73 13-B103 B103 106 11/2 lb. $15.85
13-B35 B35 or 5L380 38 3/4 lb. $5.93 13-B69 B69 or 5L720 72 1 lb. $10.88 13-B105 B105 108 11/2 lb. $16.15
13-B36 B36 or 5L390 39 3/4 lb. $6.08 13-B70 B70 or 5L730 73 1 lb. $11.03 13-B106 B106 109 11/2 lb. $16.30
13-B37 B37 or 5L400 40 3/4 lb. $6.20 13-B71 B71 or 5L740 74 1 lb. $11.18 13-B108 B108 111 11/2 lb. $16.60
13-B38 B38 or 5L410 41 3/4 lb. $6.35 13-B72 B72 or 5L750 75 1 lb. $11.33 13-B111 B111 114 2 lbs. $17.03
13-B39 B39 or 5L420 42 3/4 lb. $6.50 13-B73 B73 or 5L760 76 1 lb. $11.45 13-B112 B112 115 2 lbs. $17.18
13-B40 B40 or 5L430 43 3/4 lb. $6.65 13-B74 B74 or 5L770 77 1 lb. $11.60 13-B113 B113 116 2 lbs. $17.33
13-B41 B41 or 5L440 44 3/4 lb. $6.80 13-B75 B75 or 5L780 78 1 lb. $11.75 13-B115 B115 118 2 lbs. $17.63
13-B42 B42 or 5L450 45 3/4 lb. $6.93 13-B76 B76 or 5L790 79 1 lb. $11.90 13-B116 B116 119 2 lbs. $17.78
13-B43 B43 or 5L460 46 3/4 lb. $7.08 13-B77 B77 or 5L800 80 1 lb. $12.05 13-B117 B117 120 2 lbs. $17.90
13-B44 B44 or 5L470 47 3/4 lb. $7.23 13-B78 B78 or 5L810 81 1 lb. $12.20 13-B118 B118 121 2 lbs. $18.05
13-B45 B45 or 5L480 48 3/4 lb. $7.38 13-B79 B79 or 5L820 82 1 lb. $12.35 13-B120 B120 123 2 lbs. $18.35
13-B46 B46 or 5L490 49 3/4 lb. $7.53 13-B80 B80 or 5L830 83 11/4 lb. $12.48 13-B122 B122 125 2 lbs. $18.65
13-B47 B47 or 5L500 50 3/4 lb. $7.65 13-B81 B81 or 5L840 84 11/4 lb. $12.63 13-B123 B123 126 2 lbs. $18.80
13-B48 B48 or 5L510 51 3/4 lb. $7.80 13-B82 B82 or 5L850 85 11/4 lb. $12.78 13-B124 B124 127 2 lbs. $18.95
13-B49 B49 or 5L520 52 3/4 lb. $7.95 13-B83 B83 or 5L860 86 11/4 lb. $12.93 13-B128 B128 131 2 lbs. $19.53
13-B50 B50 or 5L530 53 3/4 lb. $8.10 13-B84 B84 or 5L870 87 11/4 lb. $13.08 13-B133 B133 136 2 lbs. $20.25
13-B51 B51 or 5L540 54 3/4 lb. $8.25 13-B85 B85 or 5L880 88 11/4 lb. $13.23 13-B136 B136 139 2 lbs. $20.70
13-B52 B52 or 5L550 55 3/4 lb. $8.40 13-B86 B86 or 5L890 89 11/4 lb. $13.38 13-B140 B140 143 2 lbs. $21.28
13-B53 B53 or 5L560 56 3/4 lb. $8.53 13-B87 B87 or 5L900 90 11/4 lb. $13.50 13-B144 B144 147 2 lbs. $21.88
• Brand new, BESTORQ notched, classic profile V-belts. Highly oil and heat resistant. Cut edge, molded notch construction.
Notches give belt superior flexibility around pulleys and longer working life compared to standard V-belts. Outside length is the outer
circumference of the belt. These belts exceed RMA published ratings.
Outside Outside Outside
ITEM Model Lgth. Shpg. Price ITEM Model Lgth. Shpg. Price ITEM Model Lgth. Shpg. Price
13-BX30 BX30 33 3/4 lb. $10.20 13-BX54 BX54 57 1 lb. $14.80 13-BX78 BX78 81 1 lb. $19.43
13-BX31 BX31 34 3/4 lb. $10.38 13-BX55 BX55 58 1 lb. $14.98 13-BX79 BX79 82 11/4 lb. $19.63
13-BX32 BX32 35 3/4 lb. $10.58 13-BX56 BX56 59 1 lb. $15.18 13-BX80 BX80 83 11/4 lb. $19.80
13-BX33 BX33 36 3/4 lb. $10.78 13-BX57 BX57 60 1 lb. $15.38 13-BX81 BX81 84 11/4 lb. $20.00
13-BX34 BX34 37 3/4 lb. $10.95 13-BX58 BX58 61 1 lb. $15.58 13-BX82 BX82 85 11/4 lb. $20.20
13-BX35 BX35 38 3/4 lb. $11.15 13-BX59 BX59 62 1 lb. $15.75 13-BX83 BX83 86 11/4 lb. $20.40
13-BX36 BX36 39 3/4 lb. $11.33 13-BX60 BX60 63 1 lb. $15.95 13-BX84 BX84 87 11/4 lb. $20.58
13-BX37 BX37 40 3/4 lb. $11.53 13-BX61 BX61 64 1 lb. $16.15 13-BX85 BX85 88 11/4 lb. $20.78
13-BX38 BX38 41 3/4 lb. $11.73 13-BX62 BX62 65 1 lb. $16.33 13-BX86 BX86 89 11/4 lb. $20.98
13-BX39 BX39 42 3/4 lb. $11.90 13-BX63 BX63 66 1 lb. $16.53 13-BX87 BX87 90 11/4 lb. $21.15
13-BX40 BX40 43 3/4 lb. $12.10 13-BX64 BX64 67 1 lb. $16.73 13-BX88 BX88 91 11/4 lb. $21.35
13-BX41 BX41 44 3/4 lb. $12.30 13-BX65 BX65 68 1 lb. $16.93 13-BX89 BX89 92 11/4 lb. $21.55
13-BX42 BX42 45 3/4 lb. $12.48 13-BX66 BX66 69 1 lb. $17.10 13-BX90 BX90 93 11/4 lb. $21.75
13-BX43 BX43 46 3/4 lb. $12.68 13-BX67 BX67 70 1 lb. $17.30 13-BX94 BX94 97 11/2 lb. $22.53
13-BX44 BX44 47 3/4 lb. $12.88 13-BX68 BX68 71 1 lb. $17.50 13-BX95 BX95 98 11/2 lb. $22.70
13-BX45 BX45 48 3/4 lb. $13.05 13-BX69 BX69 72 1 lb. $17.68 13-BX97 BX97 100 11/2 lb. $23.10
13-BX46 BX46 49 3/4 lb. $13.25 13-BX70 BX70 73 1 lb. $17.88 13-BX105 BX105 108 11/2 lb. $24.65
13-BX47 BX47 50 3/4 lb. $13.45 13-BX71 BX71 74 1 lb. $18.08 13-BX112 BX112 115 2 lbs. $26.00
13-BX48 BX48 51 3/4 lb. $13.63 13-BX72 BX72 75 1 lb. $18.28 13-BX115 BX115 118 2 lbs. $26.58
13-BX49 BX49 52 3/4 lb. $13.83 13-BX73 BX73 76 1 lb. $18.45 13-BX116 BX116 119 2 lbs. $26.78
13-BX50 BX50 53 3/4 lb. $14.03 13-BX74 BX74 77 1 lb. $18.65 13-BX120 BX120 123 2 lbs. $27.55
13-BX51 BX51 54 3/4 lb. $14.23 13-BX75 BX75 78 1 lb. $18.85 13-BX124 BX124 127 2 lbs. $28.33
13-BX52 BX52 55 3/4 lb. $14.40 13-BX76 BX76 79 1 lb. $19.03 13-BX128 BX128 131 2 lbs. $29.10
13-BX53 BX53 56 3/4 lb. $14.60 13-BX77 BX77 80 1 lb. $19.23
146 Hose Clamps, Bearings, Sprockets 8 www.surpluscenter.com
3 Bolt Offset T-Bolt Hose Clamps
Flange Bearing • Brand new, HYDRA-STAR T-Bolt hose clamps. Stain-
less steel band with plated bolt and lock nut. Smooth
ITEM 1-204-12-FB3-S inner band prevents hose damage. Can be torqued
$4.95 higher than worm gear clamps. 360 clamping on hose
for tighter connections. 1-5505-295 1-5505-95
• New 200 series 3 bolt offset flange
bearing. Cast iron construction with ITEM Mfg Model Nominal Size Hose OD range Shpg. Price
self-aligning ball bearing insert and grease 1-5505-95 HC095 1˝ 1.16˝-1.38˝ 1/8 lb. 4.95
zerk. Two set screw on the inner race to 1-5505-100 HC100 1.5˝ 1.38˝-1.56˝ 1/8 lb. 4.95
lock shaft. 1-5505-125 HC125 1.75˝ 1.65˝-1.83˝ 1/8 lb. 5.00
SPECIFICATIONS x 0.874” (horizontal x 1-5505-130 HC130 2˝ 1.73˝-1.97˝ 1/8 lb. 5.00
• Bore 3/4˝ vertical)
1-5505-150 HC150 2.13˝ 1-86˝-2.17˝ 1/8 lb. 5.15
• Bore Thru-Length 1.221˝ • Bolt Size 3/8˝
• Bearing # UC204-12 • Size 2. 2.5” wide x 4.25˝ 1-5505-155 HC155 2.25˝ 2.03˝-2.34˝ 1/8 lb. 5.25
• Housing # FB204 high 1-5505-160 HC160 2.38˝ 2.16˝-2.47˝ 1/8 lb. 5.35
• Mount Bolt Centers 1.500˝ • Shpg. 2 lbs. 1-5505-165 HC165 2.50˝ 2.20˝-2.51˝ 1/8 lb. 5.35
1-5505-200 HC200 2.56˝ 2.34˝-2.65˝ 1/8 lb. 5.35
2.5˝ Spherical 1-5505-205 HC205 2.63˝ 2.41˝-2.72˝ 1/8 lb. 5.45
Bearing 1-5505-210 HC210 2.75˝ 2.53˝-2.84˝ 1/8 lb. 5.45
1-5505-215 HC215 2.88˝ 2.66˝-2.97˝ 1/8 lb. 5.55
ITEM 1-3729 1-5505-220 HC220 3˝ 2.78˝-3.09˝ 1/4 lb. 5.65
$29.95 1-5505-250 HC250 3.13˝ 2.91˝-3.22˝ 1/4 lb. 5.65
• New, RBC Model BH4044LSS high 1-5505-260 HC260 3.25˝ 3.03˝-3.34˝ 1/4 lb. 5.75
misalignment heavy duty spherical 1-5505-270 HC270 3.38˝ 3.16˝-3.47˝ 1/4 lb. 5.85
bearing. Use for hydraulic cylinders with
proper size end fittings. Includes 2 snap 1-5505-280 HC280 3.50˝ 3.28˝-3.59˝ 1/4 lb. 5.85
rings to lock in place. 1-5505-295 HC295 3.63˝ 3.41˝-3.72˝ 1/4 lb. 5.95
SPECIFICATIONS • Load limits 1-5505-300 HC300 3.75˝ 3.53˝-3.84˝ 1/4 lb. 6.00
• Bore 2.5˝ Static radial 285,000 (lbf) 1-5505-310 HC310 3.88˝ 3.66˝-3.97˝ 1/4 lb. 6.15
• Inner ring width 2.545˝ Static thrust 62,600 (lbf)
• Spherical dia. 3.95˝ Dynamic radial 71,200 (lbf) 1-5505-400 HC400 4˝ 3.78˝-4.09˝ 1/4 lb. 6.15
• Outer ring width 2.062˝ • Shpg. 7 lbs. 1-5505-410 HC410 4.25˝ 4.03˝-4.34˝ 1/4 lb. 6.35
1-5505-500 HC500 5˝ 4.78˝-5.09˝ 1/4 lb. 6.75
30T 5/8˝ Bore 1-5505-600 HC600 6˝ 5.78˝-6.09˝ 1/4 lb. 7.35
40P Sprocket Special Purchase Sprockets
ITEM 1-5342-30 • New, finished bore ANSI standard sprockets.
$3.95 All have set screw except 1-2742-9-NS & 1-2413-10-AAA.
1-2413-10-AAA has drive pin holes
• New, steel sprocket.
SPECIFICATIONS Item # Pitch Teeth Dia. Bore Shpg. Price
• Pitch 40 • Hubless 1-2742-9-A-NS 25 9 0.84˝ 1/4˝ 1/8 lb. $1.49
• Teeth 30 • O.D. 5.06˝ 1-2413-10-AA-S 35 10 1.38 3/8˝ 1/5 lb. $1.99
• Bore 5/8˝ unfinished • Shpg 1.5 lbs. 1-2413-10-A-S 35 10 1.38˝ 1/2˝ 1/5 lb. $1.99
30T 1.875˝ Bore 40P Sprocket 1-2413-11-AAA-S 35 11 1.50˝ 5/16˝ 1/4 lb. $2.45
ITEM 1-5342-30-A $3.95 11-2413-11-A-S
1-2413-22-A-S
35
35
11
22
1.50˝
2.83˝
1/2˝
1/2˝
1/4 lb.
1 lb.
$2.45
$3.99
Roller Chain Worm Drive Hose Clamps
• Brand new, worm drive hose clamps. Stainless steel band with zinc plated screw.
Loop 5/16˝ slotted hex head screw. Sold individually or in boxes of 10 clamps.
ITEM 1-4345 5/16˝ Wide Mini Hose Clamps
$4.95 SAE Size Clamp Range ITEM
Box of 10 clamps
Shpg. Price
• New, ANSI standard riveted roller chain.
Continuous loop of roller chain. 4 1/4˝ to 5/8˝ 1-5041-4 1/4 lb. $4.20
SPECIFICATIONS • Length 48˝ (96 Links) 6 5/16˝ to 7/8˝ 1-5041-6 1/4 lb. $5.10
• Pitch 25 • Shpg. 1 lb.
1/2˝ Wide Standard Hose Clamps
1 Strand Roller Individually Box of 10 clamps
Chain Lengths SAE Size Clamp Range ITEM Shpg. Price ITEM Shpg. Price
6 3/8˝ to 7/8˝ 1-5039-6 1/10 lb. $ 0.50 1-5040-6 1 lb. $6.00
8 7/16˝ to 1˝ 1-5039-8 1/10 lb. $ 0.50 1-5040-8 1 lb. $4.90
10 1/2˝ to 11/16˝ 1-5039-10 1/10 lb. $ 0.50 1-5040-10 1 lb. $5.25
• New, ANSI standard riveted roller chain 12 1/2˝ to 11/4˝ 1-5039-12 1/8 lb. $ 0.50 1-5040-12 1 lb. $4.90
in various lengths. More sizes online!
16 13/16˝ to 11/2˝ 1-5039-16 1/8 lb. $ 0.50 1-5040-16 11/2 lbs. $5.40
ITEM Pitch Lgth. Type Shpg. Price 20 13/16˝ to 13/4˝ 1-5039-20 1/8 lb. $ 0.70 1-5040-20 11/2 lbs. $6.65
1-4830 35 211/4˝ R 3/4 lb. $ 1.85
1-4829 35 27˝ R 3/4 lb. $ 1.99
24 1˝ to 2˝ 1-5039-24 1/8 lb. $ 0.55 1-5040-24 11/2 lbs. $5.65
1-1873-A 65 (43) 33˝ R 1 lbs. $ 1.95 28 15/16˝ to 21/4˝ 1-5039-28 1/8 lb. $ 0.55 1-5040-28 11/2 lbs. $5.15
1-1873-B 65 (43) 71˝ R 2 lbs. $ 4.95 32 19/16˝ to 21/2˝ 1-5039-32 1/8 lb. $ 0.55 1-5040-32 11/2 lbs. $5.50
1-1941 65 (43) 246˝ R 6 lbs. $17.95 36 113/16˝ to 23/4˝ 1-5039-36 1/8 lb. $ 0.55 1-5040-36 11/2 lbs. $6.30
California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov Three Phase Motors & Slide Bases 147
Premium Efficiency Three Phase Motors
• Brand new LEESON premium efficiency motors. Meets or
exceeds NEMA premium efficiency standards. Cast iron frame
and base. No overload protection. Available as base mount
only or as face & base mount. Keyed shafts. All motors over
150 lbs. ship truck freight only. All motors are 1800 RPM.
SPECIFICATIONS FOR ALL
• Voltage 208-230/460 VAC • Electrically reversible • Continuous duty
• Service factor 1.15 • Enclosure TEFC • Ball bearings
50 HP, 460
VAC Electric Motor Slide
Motor Mounts ▲!
• Brand new, WORLDWIDE ELECTRIC
ITEM 10-3046 $1395.95 T-frame motor slide base. Use to mount
NEMA standard electric motor. Simpli-
• New, GENERAL ELECTRIC Model fies alignment and positioning, ideal for
5K5405SL229. tensioning belts. Steel construction with
SPECIFICATIONS baked-on primer. Washers included.
• Power 50 HP • Enclosure TENV
• Voltage 460 AC • Duty continuous
• Amperage 56 Amps • Frame 405TZ Find dimensional specifications and drawings for these items online.
• Speed 1785 • Mount rigid base
• Rotation reversible • Shaft 21/8˝ dia. x 57/8˝ Compatible
• Phase 3 with 1/2˝ keyway
• Service factor 1.15 • Size 31˝ x 26˝ x 20˝ Motor Slide Adjusting Base Mount
• Bearings ball • Shpg. 1040 lbs. ITEM Frame Size Length Screw Centers Foot Print Shpg. Price
100 RPM 10-2431-56 56 3˝ 1 75/8˝ x 53/4˝ 105/8˝ x 61/2˝ 5 lbs. $12.70
10-2431-143T 143 3˝ 1 71/2˝ x 63/4˝ 101/2˝ x 71/2˝ 8 lbs. $24.40
230 VAC 10-2431-145T 145 3˝ 1 71/2˝ x 73/4˝ 101/2˝ x 81/2˝ 9 lbs. $24.40
Gearmotor 10-2431-182T 182 3˝ 2 9˝ x 81/2˝ 123/4˝ x 91/2˝ 13 lbs. $33.25
10-2431-184T 184 3˝ 2 9˝ x 91/2˝ 123/4˝ x 101/2˝ 13 lbs. $33.25
ITEM 5-1909 $109.95 10-2431-213T 213 31/2˝ 2 101/2˝ x 91/2˝ 15˝ x 11˝ 18 lbs. $49.40
• New, BODINE model#34Y68VFYP-Z2 10-2431-215T 215 31/2˝ 2 101/2˝ x 11˝ 15˝ x 121/2˝ 20 lbs. $49.40
parallel-shaft gearmotor. 10-2431-254T 254 4˝ 2 121/2˝ x 131/4˝ 173/4˝ x 151/8˝ 22 lbs. $67.30
SPECIFICATIONS • Duty Continuous
• Speed 100 RPM • Enclosure TEAO 10-2431-256T 256 4˝ 2 121/2˝ x 15˝ 173/4˝ x 167/8˝ 23 lbs. $67.30
• Horsepower 1/8 • Mount Four 10-32. holes 10-2431-284T 284 41/2˝ 2 14˝ x 15˝ 193/4˝ x 167/8˝ 27 lbs. $75.70
• Voltage 230 VAC, 60 Hz on 33/4˝ bolt circle
• Amperage 1.4 Amps • Shaft 1/2˝ dia. x 11/4˝ long 10-2431-286T 286 41/2˝ 2 14˝ x 161/2˝ 193/4˝ x 183/8˝ 28 lbs. $75.70
• Torque 35 lb. in. w/ 3/16˝ keyway & flat 10-2431-324T 324 51/4˝ 2 16˝ x 17˝ 223/4˝ x 191/4˝ 38 lbs. $110.15
• Ratio 16:1 • Size 81/4˝ x 4˝ x 6˝
• Rotation Reversible • Shpg. 14 lbs. 10-2431-326T 326 51/4˝ 2 16˝ x 181/2˝ 223/4˝ x 203/4˝ 39 lbs. $110.15
148 Three Phase Motors 8 www.surpluscenter.com
KBAC Hybrid Drives
• Brand new, KB ELECTRONICS, KBAC hybrid drives. Adjustable frequency drives
for motors up to 3 HP. All models have heavy duty aluminum housings rated NEMA
4X/IP65. Watertight for indoor or outdoor use. Digital drive with analog interface for
easy operation. No programming needed. 200% starting torque. Serves as electronic
overload protector for motor. Optional On/Off line switch and Forward/Stop/Reverse.
Switch sold separately.
Mfg
3 HP Hitachi ITEM Accessories part #. Application Shpg
Price
Variable 11-3671-S2
11-3671-S1
FORWARD/BRAKE/REVERSE Switch 9480
ON/OFF KBAC-24D 9482
(all models)
KBAC-24D
1/8 lb.
1/8 lb.
$19.30
$18.50
Frequency 11-3672-S1 ON/OFF KBAC-27D 9523 KBAC-27D and KBAC-29 1/8 lb. $32.20
Motor Drive 11-3674-S1 ON/OFF KBAC-3PHASE 9532 KBAC-45 1/8 lb. $39.90
ITEM 11-3630
$229.95
• New HITACHI model WJ200-022SF-CP.
Variable frequency drive for controlling
Variable
speed of a three phase motor from a Frequency
single phase power source. Keypad
switches for Run/Stop and Speed control. Motor Controls
Programmable acceleration and decel-
eration time, upper and lower frequency. 11-3425-1-A 11-3425-2-A
Also has terminals for external logic • New TECO. Variable frequency drive for controlling speed of a three phase motor.
and analog input and output. Use with Keypad switches for Start/Stop and Speed control. Programmable acceleration and de-
standard 3 phase induction motors. No celeration time, upper and lower frequency. Also has terminals for external controls to
internal cooling fan, MUST be mounted to reverse motor or use external potentiometer (not included) for speed control. Internal
a cooled surface or heatsink to maintain cooling fan. Use with standard 3 phase induction motors.
temperatures below 100°F. SPECIFICATIONS FOR ALL • INPUT • OUTPUT
SPECIFICATIONS 0.1-400 Hz • Display 3 digit • Terminals screw clamp 200-240 VAC 0-240 VAC, 3 ph.
• INPUT 12-11 Amps continuous • Enclosure IP20 50/60 Hz 0-200 Hz
200-240 VAC, 1 ph. 3 HP maximum
50/60 Hz • Display 4 digit INPUT OUTPUT
24/22 Amps • Terminals Screw clamp
• OUTPUT • Size 41/2˝ x 5˝ x 41/4˝ Amps HP
200-240 VAC, 3 ph. • Shpg. 5 lbs. ITEM Model Phase Amps Cont. Max. Size Shpg. Price
11-3425-1-A L510-201-H1-U 1 OR 3 11 4.3 1 51/2˝ x 27/8˝ x 53/8˝ 3 lbs. $151.50
Variable Frequency 11-3425-2-A L510-202-H1-U 1 OR 3 15.5 7.5 2 55/8˝ x 45/8˝ x 53/4˝ 3 lbs. $201.00
1PH to 3PH
AC Motor Phase Converters
Control • Brand new PHASE-A-MATIC. Allows 3 phase electric motors to be
ITEM 11-3607 operated on 1 phase power. Converter is wired in between motor and
power line. 3 phase motors have advantages of lower current draw,
$159.00 simple reversing, lighter weight. These heavy duty converters are
• New TECO model L510-101-H1-U. suitable for long starting, frequent starting and reversing.
Variable frequency drive for controlling • 3 phase motor will produce approx. 2/3 of its rated HP.
speed of a three phase motor from a
single phase power source. Keypad • Order converters by size of motor being used with it. All models are
switches for Start/Stop and Speed for 220 VAC power.
control also has frequency set dial. Line
doubler circuitry allows 115 VAC input to Mfg Model Full Load
control 230 VAC motors. Programmable ITEM Number HP Amps Size Shpg. Price
acceleration and deceleration time, upper 11-1876 PAM-200-HD 3/4 to 11/2 5.2 101/2˝ x 6˝ x 31/2˝ 3 lbs. $199.50
and lower frequency. Use with standard 3
phase induction motors. 11-1877 PAM-300-HD 1 to 3 9.6 101/2˝ x 6˝ x 31/2˝ 3 lbs. $220.50
SPECIFICATIONS 1 HP maximum (0.75 KW) 11-1878 PAM-600-HD 3 to 5 15.2 101/2˝ x 6˝ x 31/2˝ 4 lbs. $294.00
• INPUT:100-120 VAC, 1 ph. • Display 5 digit 11-3281 PAM-900-HD 4 to 8 22 91/2˝ x 51/8˝ x 3˝ 4 lbs. $325.50
50/60 Hz,19 Amps • Enclosure IP20
• OUTPUT: • Terminals Screw clamp 11-1879 PAM-1200-HD 8 to 12 33.6 141/4˝ x 6˝ x 3˝ 5 lbs. $441.00
0-230 VAC, 3 ph. 0-200 Hz • Size 51/2˝ x 45/8˝ x 53/4˝ 11-2048 PAM-1800-HDES 12 to 18 50 13˝ x 81/2˝ x 6˝ 21 lbs. $787.50
4.3 Amps continuous • Shpg. 4 lbs.
& 800-488-3407 Three Phase Motors 149
Leeson Three Phase Motors 7.5 HP
• Brand new LEESON fractional horsepower three
phase motors with steel motor frame and base.
3500/3450/
SPECIFICATIONS 2905 RPM
• Voltage 208-230/460
• Service factor 1.15
rotation
• Enclosure TEFC Motor
• Shaft 5/8˝ with keyway • No overload protection
$249.95
• RPM 1725 • Ball bearings
• Electrically reversible • Continuous duty ITEM 10-3089
ITEM Model HP Amps Frame Shpg Price • New, CENTURY model# TCP71006
inverter duty rated motor. 1˝ I.D. lifting tab
10-2709 101079 1/3 1.3/0.65 56 22 lbs. $142.60 included.
10-2715 102922 1/3 1.3/0.65 56C 19 lbs. $159.30 SPECIFICATIONS
10-2710 100913 1/2 1.9-2/1 56 24 lbs. $153.20 • Power 71/2 HP • Enclosure TEFC
• Voltage 230/460 VAC • Duty Continuous
10-2716 102917 1/2 1.9-2/1 56C 19 lbs. $168.40 • Frame 213JM
200-400 VAC
10-2711 110034 3/4 2.8/1.4 56 22 lbs. $167.45 200-400 VAC • Face Mount Four 1/2˝-13
10-2717 110916 3/4 2.8/1.4 56C 22 lbs. $183.55 • Amperage 19/9 Amps tapped holes on 71/4˝ B.C.,
21/10 Amps 83/8˝ pilot
10-3091 116757 1 3.2/1.6 56 32 lbs. $239.95 • Base Mount Eight 7/16˝
21/11 Amps
10-3093 116745 1 3.2/1.6 56C 34 lbs. $261.60 • Speed 3500 RPM holes on 81/2˝ x 11/2˝ x 51/2˝
10-3092 116759 11/2 4.8/2.4 56 43 lbs. $262.65 x 7˝ centers
3450 RPM • Shaft 11/4˝ dia. x 41/4˝ long,
10-3094 116746 11/2 4.8/2.4 56C 44 lbs. $303.70 2905 RPM Stepped down to 1˝ dia.,
10-3095 116761 2 5.8/2.9 56 45 lbs. $305.80 • Rotation Reversible Stepped down to 7/8˝ dia.
• Phase 3 w/ 3/16˝ wide keyway
10-3101 116747 2 5.8/2.9 56C 48 lbs. $321.00 • Service Factor 1.15 • Size 167/8˝ x 15˝ x 107/8˝
1/2 HP Pool 1.5 HP 3480
• Bearings Ball • Shpg. 240 lbs.
Truck freight only.
Pump Motor RPM Motor
ITEM 10-3216
3 HP
ITEM 10-2112 1175 RPM
$79.95 $88.95 Motor
• New, pool pump motor. Ideal replace- • New General Electric. Open drip-proof
ment motor for pool pumps. Square flange motor with rigid base. Heavy duty cast
4 bolt pump mount on 71/8˝ bolt circle. iron body.
Stainless steel shaft. Thermally protected. SPECIFICATIONS ITEM 10-115633
SPECIFICATIONS • Enclosure TEFC
• Power 1/2 HP • Duty continuous
• 11/2 HP
• 3480 RPM
• Reversible
• 143T Frame $69.95
• Voltage 208-230/460 AC • Frame 56Z • 230/460 AC Volts • 7/8˝ diam x 21/4˝ keyed • New take off, General Electric three
• Amps 3/1.5 • Shaft 5/8˝ diameter with • 3 phase shaft phase 200/400 VAC electric motor
• RPM 3450 1/2˝-20 UNF-2A threaded • 4/2 amps • 81/4˝ x 10˝ x 71/2˝ model# 5KE184ATD303A.
• Rotation CCW end • 1.15 Service Factor • Shpg. 54 lbs. SPECIFICATIONS
• Phase 3 • Size 101/2˝ x 61/2˝ x 81/2˝ • Power 3 HP • Thermal Overload
• Service Factor 1.9 • Shpg 18 lbs.
2 HP 3500 • Voltage 200/400 VAC,
60 Hz
• Protection None
• Enclosure ODP
1/2 HP 3PH Pool RPM Motor • Phase 3
• Frequency 60 Hz
• Duty Continuous
• Frame 184T
Pump Motor ITEM 10-2899 • Amperage 16/8 Amps • Rigid Base Mount
Motor Volt AC
Washdown 1/2 HP
ITEM 10-3117
Motor 3450 RPM
$299.95 Motor
• New, MARATHON model ITEM 10-3118
D56C17W5388 washdown motor.
Designed to handle high-pressure wash- $379.95 ITEM 10-3080
downs. White epoxy paint coat. Stainless
steel fan and junction box covers. No
• New, MARTHON model 182TCWW7026
epoxy coated washdown electric motor. $69.95
Capacitor start and run. Steel housing. • New, DAYTON model# 3N590BD three-
thermal overload protection. Steel phase, industrial motor. Rigid welded base.
construction. Solid state encapsulated No thermal overload protection.
Made in the USA. SPECIFICATIONS • Service Factor 1.25
starting switch. Made in the USA. • Power 1/2 HP/ 1/3 HP • Bearings Ball
SPECIFICATIONS • Enclosure TEFC SPECIFICATIONS
• Catalog Number N1684 • Enclosure TEFC • Voltage 208-230/460 VAC, • Enclosure ODP
• Catalog No. N682 • Duty Continuous 60 Hz, • Duty Continuous
• Frame 56 • Power 2 HP • Duty Continuous
• Power 1 HP 190/380 VAC, 50 Hz • Frame 56
• Base Mount • Voltage 115/208-230 AC • Frame 182T
• Voltage 115/208-230 AC • Amperage 1.9-
Four 5/16˝ wide slots on • Amperage 21/11-10.5 • Base Mount: • Base Mount Four 11/4˝
• Amperage 12.8/6.4 Amps Amps 1.8/0.60 Amps, x 5/16˝ slots on 47/8˝ x 3˝
47/8˝ x 3˝ centers Four 3/8˝-16 tapped holes
• Speed 1800 RPM • Speed 1740 RPM 1.6/0.8 Amps centers
• Shaft 5/8˝ dia. x 17/8˝ w/ on 57/8˝ diameter bolt circle
• Rotation Reversible • Rotation Reversible • Speed 3450 RPM, • Shaft 5/8˝ dia. x 115/16˝ long
3/16˝ keyway • Shaft 5/8˝ diam. x 17/8˝ w/
• Phase 1 • Phase 1 3/16˝ keyway 2850 RPM w/ 3/16˝ wide keyway
• Service Factor 1.15 • Size 123/16˝ x 91/8˝ x 9˝
• Shpg. 36 lbs. • Service Factor 1.15 • Size 10.5˝ x 10˝ x 11˝ • Rotation Reversible • Size 10˝ L x 61/2˝ W x 7˝ T
• Bearings Ball • Bearings Ball • Shpg. 70 lbs. • Phase 3 • Shpg. 20 lbs.
& 800-488-3407 Single Phase Motors 153
3/4 HP Electric 3/4 HP Electric 1 HP Electric
Motor Motor Motor
ITEM 10-3126 ITEM 10-3128 ITEM 10-3130
$49.95 $49.99 $54.95
• New, AO Smith Electric model# J218-1006. • New, AO Smith Electric model# J218-590B. • New, AO Smith Electric model# J218-596B
SPECIFICATIONS SPECIFICATIONS • Thermal Overload SPECIFICATIONS • Thermal Overload
• Power 3/4 HP • Enclosure ODP • Power 3/4 HP Protection Automatic • Power 1 HP Protection Automatic
• Voltage 115/230 VAC • Duty Continuous • Voltage 115/230 VAC • Enclosure ODP • Voltage 115/230 VAC • Enclosure ODP
• Phase 1 • Face Mount Four 3/8˝ • Phase 1 • Duty Continuous • Phase 1 • Duty Continuous
• Frequency 60 Hz threaded holes in motor • Frequency 60 Hz • Face Mount Four 3/8˝ • Frequency 60 Hz • Face Mount Four 3/8˝
• Amperage 12.5/3 Amps face on 71/8˝ B.C. • Amperage 11.5/5.75 threaded holes in motor • Amperage 14.5/7.25 threaded holes in motor
Amps face on 71/8˝ B.C.
• Speed 3600 RPM • Shaft 12mm dia. tapered Amps face on 71/8˝ B.C.
• Speed 3600 RPM • Shaft 5/8˝ dia. x 11/2˝ long
• Rotation CCW x 3/4˝ long with M10-1.0 • Speed 3600 RPM • Shaft 5/8˝ dia. x 11/2˝ long • Rotation CCW with 1/2˝-20 threaded end
• Bearings Ball threaded end • Rotation CCW with 1/2˝-20 threaded end • Service Factor 1.3 • Size 111/4˝ x 61/2˝ x 61/2˝
• Thermal Overload Protec- • Size 12˝ x 8˝ x 8˝ • Service Factor 1.25 • Size 101/2˝ x 61/2˝ x 61/2˝ • Bearings Ball • Shpg. 25 lbs.
tion Automatic • Shpg. 23 lbs. • Bearings Ball • Shpg. 22 lbs.
3/4 HP 3450 RPM
1/2 HP Electric 3/4 HP 1725 RPM 115 Volt Jet Motor
Motor AC Leeson
ITEM 10-3019
Electric
ITEM 10-3127
Motor $89.95
$49.99 • New, Myers model# F48Y05A03
• New, AO Smith Electric ITEM 10-3204 (25051A008) thermally protected,
model# J218-582A-LS.
SPECIFICATIONS • Thermal Overload
$129.95 capacitor start jet pump motor.
Automatic thermal overload protection.
• Power 1/2 HP Protection Automatic • Brand new, Leeson Electric model# SPECIFICATIONS
• Voltage 115/230 VAC • Enclosure ODP C6S17DB9A. • Power 3/4 HP • Frame 48Y
• Phase 1 • Duty Continuous SPECIFICATIONS • Enclosure ODP • Voltage 115/230 AC • Mount Face Mount w/
• Frequency 60 Hz • Face Mount Four 3/8˝ • Power 2 HP • Duty Continuous • Amperage 10.0/5.0 Amps Four 3/8˝ Holes on 71/4˝ Bolt
threaded holes in motor • Voltage 115/230 AC • Frame 56 • Speed 3450 RPM Circle
• Amperage 11.5/5.75
Amps face on 71/8˝ B.C. • Amperage 23.8/11.8 • Mount 4 bolt base 47/8˝ x • Rotation Counterclockwise • Shaft 5/8˝ dia. x 21/8˝
• Shaft 5/8˝ dia. x 11/2˝ long • Speed 3450 RPM 3˝ centers • Phase 1 Overall Length, 1/2˝-20 x 1/4˝
• Speed 3450 RPM Long RH Threaded End
with 1/2˝-20 threaded end • Rotation Reversible • Shaft 5/8˝ diam. x 2˝ w/ 3/16˝ • Service Factor 1.30
• Rotation CCW • Size 121/8˝ x 53/4˝ x 8˝
• Size 12˝ x 61/2˝ x 61/2˝ • Phase 1 keyway • Enclosure ODP
• Service Factor 1.3 • Duty Continuous • Shpg. 25 lbs.
• Bearings Ball • Shpg. 17 lbs. • Service Factor 1.15 • Size 10˝ x 67/16˝ x 815/16˝
• Bearings Ball • Shpg. 33 lbs.
2 HP 3450
2 HP 1800 3/4 HP 3600 RPM Motor
RPM RPM ITEM 10-2638
Motor
ITEM 10-3121
Motor $119.95
ITEM 10-3120 • New, MARATHON model
$229.95 $59.95
5KC49RN2520Y electric motor. Manual
thermal protection. Welded base mount.
• New, MARATHON model 145TBDR5337 • New, BLUFFTON MOTOR WORKS SPECIFICATIONS • Enclosure ODP
general purpose electric motor. Capacitor model B1244 pool pump motor. Smooth • Power 2 HP • Duty Continuous
start and run. Steel housing. Thermal over- portion of shaft measures 19/16˝ from the • Voltage 115/230 AC • Frame 56
load protection with manual reset. Made bearing overall length 21/16˝. Automatic • Amperage 23.8/11.8 • Mount 4 bolt base 47/8˝ x
in the USA. thermal overload protection. • Speed 3450 RPM 3˝ centers
SPECIFICATIONS SPECIFICATIONS • Enclosure ODP • Rotation Reversible • Shaft 5/8˝ diam. x 2˝ w/ 3/16˝
• Power 2 HP • Duty Continuous • Phase 1
• Power 3/4 HP • Duty Continuous keyway
• Voltage 115/230 AC • Frame 145T • Service Factor 1.15
• Voltage 115/230 AC • Frame 56Y • Size 10˝ x 67/16˝ x 815/16˝
• Amperage 18.8/9.4 Amps • Rigid Base Mount • Bearings Ball
• Amperage 12.8/6.4 Amps • Mount Square flange 4 • Shpg. 33 lbs.
• Speed 1800 RPM Six 0.34˝ diam. holes on • Speed 3450 RPM bolt on 71/8˝ diam. B.C.
• Rotation Reversible
• Phase 1
51/2˝ x 4˝ to 5˝ centers
• Shaft 7/8˝ diam. x 21/8˝ w/
• Rotation CCW • Shaft 5/8˝ diam. x 21/16˝ w/ 71/2 HP 1740
• Service Factor 1.15 3/16˝ keyway
• Phase 1
• Service Factor 1.27
1/2˝-20 RH threaded end
• Size 107/8˝ x 65/8˝ x 65/8˝
RPM Motor
• Bearings Ball • Size 11.62˝ x 8.89˝ x 8.58˝
• Enclosure ODP • Shpg. 48 lbs.
• Bearings Ball • Shpg. 24 lbs. ITEM 10-3199
• New, TECHTOP farm duty electric motors. Steel construction. Ball bearings. Capacitor start and run.
SPECIFICATIONS: • Continuous duty • TEFC • Service Factor 1.15 • Reversible rotation • Manual reset thermal overload
ITEM 5-1770
ITEM 5-1915 $139.95 housing. Shaded pole motor.
Mounting holes tapped 8-32.
• New DAYTON model 90K942 inline SPECIFICATIONS • Enclosure open
$18.95 shaded pole gearmotor. Features steel
gears and needle bearing supported
• Speed 62 RPM
• Voltage 115 AC
• Mnt. 4 holes on back face
• Shaft 1/2˝ dia. x 11/2˝ hollow
• Four 10-32 UNF tapped bolt hole face output shaft. No thermal overload. Base • Amperage 4 Amps threaded 7/16-20 LH
mount on 23/8˝ x 23/8˝ centers. Integral brake. mount bracket included. • Rotation CW • Size 21/2˝ x 2˝ x 543/4˝
SPECIFICATIONS SPECIFICATIONS
• Duty intermittent • Shpg. 3 lbs.
• SPG Co. Model ISG-3250BXA(P/N 2051746) • Duty Continuous
• Speed 6.5 RPM
• Voltage 115 AC
• Enclosure open
• Mount face
• Speed 4 RPM
• Voltage 115 AC • Enclosure TEFC 80 RPM,
• Amperage 2.65 Amps • Shaft 1/2˝ dia. x 11/4˝ • Amperage 1.4 Amps
• Power 1/40 HP
• Mount Base or Face
• Shaft 5/8˝ dia. x 11/2˝ w/
120 VAC
• Torque 225 in - lbs. w/keyway
• Rotation CW • Size 51/4˝ x 23/4˝ x 43/4˝ • Torque 200 in - lbs. 3/16˝ keyway ITEM 5-1572
• Duty intermittent (1 min) • Shpg. 7 lbs. • Gear Ratio 396:1
• Rotation CW
• Size 83/8˝ x 41/8˝ x 51/8˝
• Shpg. 10 lbs. $8.95
743 RPM, 115 VAC Inline • New BREVEL Model Y.
Gearmotor 15 RPM, Inline parallel shaft gearmotor.
SPECIFICATIONS • 4 hole face mount
115 VAC, • RPM 80 19/16˝ x 11/4˝ ctrs.
Gearmotor • Voltage 120 VAC
• Amps 2 (no load)
• Shaft 3/8˝ diam. x 3/4˝
w/ flat
ITEM 5-1684 • Rotation CW • Size 31/8˝ x 21/2˝ x 43/8˝
$9.95 • Duty intermittent • Shpg. 4 lbs.
$24.40 each
• Phase Single • Mount 12 hole on 10˝ bolt
Control for • Power Factor 0.8-1.0 circle
• Mounting Pilot Diameter 9˝ • Brand new BUYERS direct current circuit
DC Motors • Power Requirement Mini-
mum 25 HP gas engine • Size 161/4˝ x 11˝ x 13˝ breaker. Plastic housing with rubber gas-
• Amperage 52.1 amps • Shpg. 160 lbs. ket, rubber caps for terminal studs. Push
button trip, manual reset. Waterproof.
Lighter Plug SPECIFICATIONS FOR ALL
• Max. voltage 30 VDC • Mount two hole
w/Cord • Terminal studs 1/4-28 on 27/16˝ ctrs.
ITEM 11-2269 $96.50 ITEM 11-3616
• Size 215/16˝ x 115/16˝ x 13/8˝ • Shpg. 1/4 lb.
• Brand new MINARIK Model MM23001C.
Adjustable SCR speed controller for
permanent magnet or shunt wound, brush
$1.95 ITEM
11-3317-30
Amperage
30 Amps
• New, plugs into lighter socket to deliver
type motors. Ideal for motors in the range power for 12 volt DC equipment. 11-3317-50 50 Amps
of 1/8 HP to 2 HP. Compact design in SPECIFICATIONS 11-3317-60 60 Amps
industry standard MM footprint. Optional • Conductor Gauge 18 • End 1 Lighter plug 11-3317-90 90 Amps
heatsink (sold separately) can be added • Conductor Count 2 • End 2 Stripped wires
to boost output current capacity. Integral • Length 78˝ • Shpg. 1/4 lb. 11-3317-100 100 Amps
potentiometers for setting minimum and 11-3317-120 120 Amps
maximum speed, acceleration and de
celeration, torque and IR compensation.
5 HP Magnetic 11-3317-150 150 Amps
Speed control potentiometer included. Starter 11-3317-200 200 Amps
SPECIFICATIONS • 5 amps output,
• Input 115 or 230 VAC,
50/60 Hz
10 amps w/heatsink
• 1/8 HP to 1 HP at 90 VDC
Full Wave
• Armature voltage • 1/4 HP to 2 HP at 180 VDC Bridge
(115 VAC IN): 90 VDC • 1% regulation over
(230 VAC IN): 180 VDC 60:1 speed range Rectifier
• Size 45/16˝ x 319/32˝ x 119/32˝ • Shpg. 2 lbs.
ITEM 22-1206
ITEM 5-1898-W
140 RPM 4.5 VDC
ITEM 5-1898-BK Gearmotor
ITEM 5-1898-R ITEM 5-1795
ITEM 5-1898-B
ITEM 5-1898-P
ITEM 5-1897-L
ITEM 5-1897-R
$9.95
• New, SOURCE ENGINEERING
$9.99 $12.99 inline permanent magnet gearmotor. Low
voltage and compact size.
SPECIFICATIONS • Duty Intermittent SPECIFICATIONS • Duty Intermittent SPECIFICATIONS • Duty continuous
• Speed 70 RPM • Shaft 21/2˝ diameter 6 • Speed 75 RPM no load • Shaft 21/2˝ diameter 6 • Speed 140 RPM • Mount four M3 holes face
• Voltage 12 VDC lug hub • Voltage 12 VDC lug hub • Voltage 4.5 DC • Shaft 6mm dia. x 15mm
• Amperage 0.7 Amps no • Spindle Bore 3/8˝ • Spindle Bore 1/2˝ • Amperage 0.21 Amps w/flat
• Amperage 1.2 Amps no • Torque 12 in. oz. • Size 21/4˝ dia. x 11/2˝
load • Size 61/2˝ x 35/8˝ x 3˝ load • Size 73/8˝ x 41/4˝ x 35/8˝
• Shpg. 2 lbs • Rotation reversible • Shpg. 1 lb.
• Rotation Reversible • Rotation Reversible • Shpg. 3 lbs
& 800-488-3407 DC Gearmotors 161
5 RPM, 24 VDC Inline 142 RPM 24 Volt 12 VDC, 5.9˝ Stroke
Gearmotor DC Inline Linear Actuator
Gearmotor
ITEM 5-1911 $8.95 ITEM 5-1833
• New, HENKWELL, very compact perma-
nent magnet precision inline gearmotor. $129.95
ITEM 5-1840 $129.95 Will operate on 6-24 VDC. Planetary gear
reduction, dual ball bearings.
• New DUFF NORTON model LT225-1-
150. Limit switches at end of stroke
• New take-off, SolFocus P/N 350-000062- SPECIFICATIONS
000 permanent magnet inline gearmotor. • Speed 142 RPM no load, • Rotation Reversible SPECIFICATIONS
113 RPM rated load • Duty Continuous • Stroke 150 mm (5.9˝) • Duty 25%
Rated for 24 volts but will operate on 12 • Voltage 12 DC • Enclosure IP66
volts at reduced speed and output. • Voltage 24 DC rated • Mount 4 M2 tapped holes,
• Gear Ratio 84:1 18mm B.C. • Load rating 225 lbs. max. • Pin holes 1/4˝ dia.
SPECIFICATIONS • Duty continuous • Torque 1.3 in.lb. rated, 4.9 • Shaft 6mm dia. x 14mm • Extension speed • Retracted lgth. 10˝
• Speed 5 RPM • Enclosure TENV in.lb. stall w/crosshole No load 8 mm/sec • Shaft dia. 20 mm (0.787˝)
• Voltage 24 VDC • Face mount 2 bolt, 106mm • Amps 0.1 no load, 0.2 • Size 11mm dia. x 50mm Max load 6 mm/sec • Size 103/4˝ x 11/2˝ x 3˝
• Amperage 4.2 Amps (4.173˝) bolt circle rated load • Shpg. 1/2 lb. • Amps 3.25 Full load • Shpg. 3 lbs.
• Power 1/10 HP • Mount pilot 68mm (2.677˝)
• Torque 109 Nm • Shaft 25mm (0.984˝) dia. x 90 RPM 12 Volt 120 RPM,
(964.8 in.lbs.)
• Gear ratio 266.3:1
11/2˝ long 18T spline
• Size 185/8˝ x 53/16˝ x 61/4˝ DC Inline 22 VDC Inline
• Rotation reversible • Shpg. 40 lbs. Gearmotor Gearmotors
171 RPM, 24 VDC ITEM 5-1912 $8.95 ITEM 5-1810 $9.99
• New, KINDLY MOTOR model KC55-
Inline Gearmotor 37G50-3162 compact permanent magnet • New, IGARASHI permanent magnet
inline gearmotor. Operates on 12-24 VDC. inline gearmotor. Spur geartrain. Includes
SPECIFICATIONS rubber boot over brushholders.
• Speed 90 RPM (no load) • Duty Continuous SPECIFICATIONS
• Voltage 12 DC • Mount 6 holes on face • Speed 120 RPM-no load • Duty continuous
• Amps 160 mA (no load) tapped M3 • Voltage 22 DC • Mount 3 holes on face,
ITEM 5-1839 $119.95 • Torque 8 in.lbs.
• Gear Ratio 50:1
• Shaft 5.5mm x 15” w/flat
• Size 35mm dia. x 83mm
• Amperage 90 mA no-load M3 thread
• Performance 70 RPM • Shaft 5mm dia. x 7mm
w/50 oz.in. torque, 500 mA w/flat
• New take-off, SolFocus P/N 350-000058- • Rotation Reversible • Shpg. 1 lb.
• Gear ratio 50 • Size 1.3˝ dia. x 2.5˝
000 permanent magnet inline gearmotor. • Rotation reversible • Shpg. 1 lb.
Rated for 24 volts but will operate on 12 30 RPM,24 VDC Gearmotor
volts at reduced speed and output.
SPECIFICATIONS ITEM 5-1358 15 RPM, 24 VDC
• Speed 171 RPM • Enclosure TENV $24.95 ITEM 5-1451
• Voltage 24 VDC
• Amperage 12 Amps
• Power 1/3 HP
• Face mount 4 bolt, 80mm
(3.150˝) bolt circle
• Mount pilot 60mm (2.362˝)
• New MULTI-PRODUCTS
CO. INC. #2738. Offset
$4.95
gearbox. • New CKD Model J209-
• Torque 9.1 Nm (80.5 in.lbs.) • Shaft 14mm (0.551˝) dia. x 056. DC synchronous motor
• Gear ratio 18.7:1 15/16˝ long with 5mm keyway SPECIFICATIONS attached to removable mtg. bracket.
• Rotation reversible • Size 121/8˝ x 45/8˝ x 51/2˝ • RPM 30 • HP 1/45
• Duty continuous • Shpg. 19 lbs. • Duty continuous • Mnt. 4 bolt 21/2˝ x 2˝ pattern SPECIFICATIONS
• Voltage 24 DC • Torque 47 in. lbs. • RPM 15 • Shaft 3/16˝ diam. x
13 RPM 24 VDC • Shaft 11 mm dia. x 12 mm
• Amps 0.68 no load w/
• Size 41/2˝ x 3˝ x 43/4˝
• Rotation reversible
• Voltage 24 DC
• Amps 0.2 no load
1/2˝ long w/flat
• Mount 2 bolt on 313/32˝ BC
Right Angle dual flats • Shpg. 5 lbs. • Rotation CW • Size 4˝ x 13/4˝ x 2˝
Gearmotor 45 RPM, 24 VDC
• Duty intermittent • Shpg. 1 lb.
Mounting Adapters for 500 & 1000 lb. Actuators 30 Amp, 12 VDC Polarity
All brackets are sold individually. Can be used at either end of actuator Reversing
ITEM 5-1679-B $33.40 Switches
• Billet aluminum. Shpg. 2 lbs.
ITEM 5-1679-BS $29.85 $17.55 each
• Steel bracket. Shpg. 2 lbs. • DPDT-CO With Permanant Jumper
Treadmill Motors With Flywheel All shafts are 17mm dia. All have 10 groove pulley
DC Shaft Integral
ITEM Model HP Voltage Amps RPM Lgth. Flywheel Fan Size Shpg. Price
10-3027 F-295739 4.25 130 24.4 5225 41mm 63/4˝ dia. with 13/4˝ O.D. Yes 121/2˝ x 63/4˝ O.D. 33 lbs. $69.95
10-3031 M-326338 3 130 17.2 4725 35mm 63/4˝ dia. with 31mm O.D. Yes 111/8˝ x 63/4˝ O.D. 28 lbs. $79.95
10-3033 M-184002 3 120 22.1 2975 54mm 7˝ dia. with 2.10˝ O.D. No 123/8˝ x 7˝ O.D. 35 lbs. $51.95
10-3034 F-237595 2.25 130 12.9 5135 44mm 63/8˝ dia. with 31mm O.D. Yes 93/4˝ x 63/8˝ O.D. 23 lbs. $45.95
10-3035 F-255717 4.25 130 24.4 5110 41mm 63/4˝ dia. with 13/4˝ O.D. No 123/8˝ x 63/4˝ O.D. 33 lbs. $69.95
10-3037 M-217250 2.5 130 14.3 4090 33mm 63/8˝ dia. with 11/2˝ O.D. Yes 12˝ x 63/8˝ O.D. 32 lbs. $48.95
10-3038 F-280159 3.5 130 20.1 4175 52mm 61/2˝ dia. with 1.20˝ O.D. Yes 121/4˝ x 61/2˝ O.D. 33 lbs. $58.95
10-3048 F-309513 3 130 17.2 5265 41mm 63/4˝ dia. with 31mm O.D. Yes 113/8˝ x 63/4˝ O.D. 30 lbs. $42.95
10-3065 329829 4.25 130 21.1 5095 33mm 63/4˝ dia. with 36mm O.D. Yes 125/8˝ x 63/4˝ O.D. 33 lbs. $94.95
10-3070 L-315219 4.25 130 24.4 5195 42mm 63/4˝ dia. with 31mm O.D. Yes 121/4˝ x 63/4˝ O.D. 33 lbs. $94.95
10-3072 234976 3.5 150 20.1 4500 35mm 6.772˝ dia. with 36mm O.D. Yes 121/2˝ x 63/4˝ O.D. 34 lbs. $77.95
16-1536-9-A 90050451 9˝
High Performance Series
Puller 729 12.4 9˝ dia. x 3.5˝ 7 lbs. $108.95
Wiring Harness
16-1536-9-B 90050569 9˝ Pusher 693 10.8 9˝ dia. x 3.5˝ 7 lbs. $108.95 with Relay ▲!
16-1536-12-A 90050563 12˝ Puller 1192 11.9 12˝ dia. x 3.5˝ 7 lbs. $108.95
16-1536-12-B 90050564 12˝ Pusher 1237 9.5 12˝ dia. x 3.5˝ 7 lbs. $108.95
16-1536-13-A 90050429 13˝ Puller 1504 17.3 13˝ dia. x 3.5˝ 8 lbs. $108.95
16-1536-13-B 90050437 13˝ Pusher 1339 13 13˝ dia. x 3.5˝ 8 lbs. $108.95
16-1536-14-A 90050384 14˝ Puller 1761 19 14˝ dia. x 3.5˝ 7 lbs. $108.95
16-1536-14-B 90050442 14˝ Pusher 1718 21 14˝ dia. x 3.5˝ 7 lbs. $108.95
$38.95
16-1536-16-A 90050356 16˝ Puller 2067 20.1 16˝ dia. x 3.5˝ 6 lbs. $108.95
16-1536-16-B 90050383 16˝ Pusher 2077 18.1 16˝ dia. x 3.5˝ 6 lbs. $108.95 ITEM 16-1539
Big Motor Model • Use for easy installation of General Cab
16-1537 90050588 16˝ Puller 2469 31.9 16˝ dia. x 3.6˝ 8 lbs. $144.95 cooling fans. Includes relay and fuse.
Shpg 3 lbs.
Electric Baseboard Heaters Wiring Harness with Relay
and Temperature Sensor
ITEM 16-1540-185 $63.00
185 TEMP CONTROL
• New. Permanent mount baseboard electric heater. Ideal as primary or auxiliary heat
source. Mount on exterior wall of room. Use with external thermostat (not included). Ther-
mal overload protection. Can be wired from either end. UL listed. Size 7˝ high x 21/2˝ deep.
ITEM 16-1540-195
195 TEMP CONTROL $63.00
ITEM Mfg Model Length Voltage Watts Color Shpg. Price
11-2560-5-R-B Raywall CC2D12 5 Ft. 240/208 1250/937 Beige 22 lbs. $14.99 Pump
11-2560-5-R-W Raywall BCD12 5 Ft. 240/208 1250/937 Beige 22 lbs. $14.99 Frame ▲
!
11-2560-5-M-W Markel H2205NW 5 Ft. 240/208 1250/950 White 22 lbs. $14.99
11-2560-5-M-B Markel H2205 5 Ft. 240/208 1250/950 Beige 22 lbs. $14.99
ITEM 1-4942-A
11-2560-7-R-B Raywall BC2D17 7 Ft. 240/208 1750/1310 Beige 31 lbs. $19.99 $27.99
• New, HYPRO steel protective pump
11-2560-7-R-B-1 Raywall CC2D17 7 Ft. 240/208 1750/1310 Beige 31 lbs. $19.99 frame. Use to mount engine driven trans-
11-2560-10-M-B Markel H2200 10 Ft. 240/208 2500/1875 Beige See Note $24.99 fer pumps or other equipment. Provides
protection from tipping over. Includes
11-2560-10-M-B-1 Markel H2500N 10 Ft. 240/208 2500/1875 Beige Below on $24.99 mounting platform for engine. Does not
11-2560-10-M-W Markel H2500NW 10 Ft. 240/208 2500/1900 White 10 ft $24.99 include rubber isolation dampeners (feet).
11-2560-10-R-B Raywall CC2D25 10 Ft. 240/208 2500/1875 Beige Models $24.99 SPECIFICATIONS x 131/2˝
• Frame 1˝ steel tubing • Exterior Size 171/4˝ x 211/4˝
11-2560-10-R-B-1 Raywall BC2D25 10 Ft. 240/208 2500/1875 Beige $24.99 • Color Black x 161/2˝
Note: The 10 foot heaters can only ship via truck freight due to their length. • Mount Platform holes 31/8˝ • Actual wt 11 lbs.
Because of this they are only sold in sets of 10. x 63/8˝ • Shpg. 48 lbs. (Dimen-
You may mix and match any of the 10 foot models to get to 10 pieces. Huge savings in this quantity!! • Interior Size 151/4˝ x 191/4˝ sional wt.)
166 DC Blowers 8 www.surpluscenter.com
32 CFM, 552 CFM 12 200 CFM
12 VDC VDC Centrifu- 12 Volt
ITEM 16-1455 gal Blower DC Fan
$8.95 ITEM 16-1541 ITEM 16-1556
• New, 12 volt fan. Model 12032HB-TE.
Quiet operation. Flat mounting on back
$59.95 $5.95
• New, ROTOM model R7-RB522 • New, JARO fan
side. Three thru holes for mounting with centrifugal blower. Ideal blower for cool- model AD1212HB-
brass inserts. ing, heating, ventilating and other general F92GP. Sound level 61
SPECIFICATIONS • Inlet 3˝ dia. purpose air delivery. Metal housing and db. Ball bearing. Thermoplastic housing
• Flow 32 CFM max. • Outlet 11/8˝ x 21/4˝ blower wheel. Dynamically balanced for and impeller.
• Voltage 12 DC • Blower wheel smooth and quiet operation.
• Amperage 0.62 Amps 120mm x 32mm SPECIFICATIONS • Blades 9
• Power 7.5 watts • Size 43/4˝ x 43/4˝ x 11/4˝ SPECIFICATIONS • Duty Continuous • Flow 200 CFM max. • Mount 105mm sq.
• Speed 2400 RPM • Shpg. 1 lb. • Flow 552 CFM open flow • Mount 6 hole flange 813/16˝ x • Voltage 12 DC • Size 120mm x 120mm x
• Flow 462 CFM at 0.2 inches 43/8˝ outside perimeter 38mm
static pressure center/center • Amps 1.95
• Shpg. 1/2 lb.
38 CFM, • Flow 358 CFM at 0.5 inches • Bearings Ball
static pressure • Inlets 49/16˝ diameter
• Speed 3100 RPM
ITEM 16-1505
• Amperage 9.4 amps full load• Size 9˝ x 97/8˝ x 101/4˝
• Speed 1630 RPM • Shpg. 12 lbs. 12 VDC Draft
$5.95 Induction
• New, SONY Model SFF22C fan. 12-28 VDC Blower
Brushless design with lubricated ball ITEM 16-1390
bearing. Flat mounting on back side. 3 Axial Fan
thru holes for mounting.
SPECIFICATIONS
ITEM 16-1553 $19.99
• Flow 38 CFM max.
• Voltage 10 DC
• Outlet 13/8˝ x 11/2˝
• Blower wheel 3˝ dia. x 11/8˝
$9.95 • New, draft induction blower. Ideal for
use on corn or wood stoves, furnaces
• New, PAPST type 6224N/17HT axial and other general purpose air movement.
• Amperage 0.51 Amps • Size 4˝ x 4˝ x 11/2˝ fan. Ball bearings. Metal housing with Metal housing and blower wheel.
• Inlet 23/8˝ dia. • Shpg. 1 lb.
plastic impellor. 12˝ cord with 5 pin SPECIFICATIONS • Duty continuous
connector plug. Discharges over struts. • Voltage 12 DC • Mount 5 hole flange
200 CFM, SPECIFICATIONS • Sound Level 61 dB • Amperage 0.8 Amps • Inlet 5˝ diam.
• Power 8 Watts • Outlet 19/16˝ x 111/16˝
12 VDC • Air Flow 282.5 CFM max
• Voltage (rated) 24 VDC,
• Mount 4 thru-holes
• Blade 55/8˝ dia. • Speed 2000 RPM • Size 93/4˝ x 77/8˝ x 51/8˝
Blower useable on 12-28 VDC
• Amperage 1.1 Amps
• Number of blades 7
• Size 63/4˝ dia. x 2˝
• Noise 74 dB • Shpg. 6 lbs.
12 VDC Fans
• New, axial fans. Provide airflow at very low
sound levels. Low power consumption. Easy to
mount with holes in each corner.
16-1507 16-1525 16-1531
ITEM CFM Mfg. Watts RPM # Blades db Bearing Size Shpg. Price
16-1507 17 NMB 1 3600 5 28 Ball 60mm x 60mm x 25mm 1/4 lb. $1.89
16-1508 22 Globe 2.04 5 34 Ball 60mm x 60mm x 25mm 1/4 lb. $2.49
16-1522 9.5 GDT 1.2 6000 9 27 Sleeve 40mm x 40mm x 10mm 1/4 lb. $2.99
16-1524 11.4 Delta 1.8 5500 7 35 Ball 50mm x 50mm x 10mm 1/4 lb. $2.99
16-1525 11.9 Protechnic 2.3 5800 9 34.6 Rifle 50mm x 50mm x 10mm 1/4 lb. $2.99
16-1527 50 Delta 10.44 7 55 Ball 60mm x 60mm x 25mm 1/4 lb. $3.49
16-1519 98.6 CoolMa x 9.6 3000 7 43.3 Ball 120mm x 120mm x 25mm 1/2 lb. $4.99
16-1518 108 Sunon 5.4 3100 7 44.5 Vapo 120mm x 120mm x 25mm 1/2 lb. $4.99
16-1528 109 Nidec 20.7 8500 7 60 Ball 80mm x 80mm x 38mm 1/2 lb. $3.99
16-1531 110 SanAce 13.2 5000 7 50 Ball 92mm x 92mm x 38mm 1/2 lb. $3.99
18/3 Power
Cords
11-3503 11-3504 11-3505 • New, 3 conductor
11-3503-A UL listed black power
cords. SJT smooth jacket. Three prong
ITEM Length Conductors Jacket Special Shpg. Price male plug. Shpg. 1/2 lb.
11-3503 20 feet 12/3 SJEOW Power/Ground Indicator 6 lbs. $19.99 ITEM 11-3400
• Length 36˝ with stripped ends
$1.49
11-3503-A 20 feet 12/3 SJEOW 3 Outlets 6 lbs. $21.99
11-3504 40 feet 12/3 SJEOW 3 Outlets 7 lbs. $36.99 ITEM 11-3401 .59 ¢
• Length Black 61/2˝ with 3/16˝ spade connector
11-3505 75 feet 12/3 SJEOW 3 Outlets 11 lbs. $69.99 • Length White 11˝ to 181/2˝ with 1/4˝ spade connector
• Length Green 9˝ with 1/4˝ ring connector
69˝ 18/3 88˝ 18/3 Power Cord with
Power Cord Hospital Grade Plug 18/3 16˝ Power Cord
ITEM 11-3639 ITEM 11-3638 ITEM 11-3609
$3.99 $3.99 $2.95
• New. Three-conductor UL listed power • New, black line cord. Hospital grade • New, three conductor power cord. SJT
cord. SJT jacket. VW-1 flame retardent. plug with green dot. type jacket.
SPECIFICATIONS White spade terminals, SPECIFICATIONS • Jacketing Type SJT SPECIFICATIONS • Jacketing Type SJT
• Wire #18 AWG, 3 con- Green ring terminal • End 1 NEMA 5-15P • Conductor Gauge 18 • End 1 Stripped leads
• Conductor Gauge 18
ductors • Jacket Type SJT • End 2 None, cut flush with • Conductor Count 3 • End 2 IEC C14
• Conductor Count 3
• Plug 3-prong male • Length 69 inches jacket • Length 16 in. • Shpg. 1/4 lb.
• Length 88˝
• Shpg 1/2 lb.
• Connector Ends Black/ • Max Temperature 105°C • Shpg. 1 lb.
18/2 Power
18/3 6 Foot 8 Ft. 16/3 IEC Hospital Cords
Power Cord Grade Power Cord
ITEM 11-3608 ITEM 11-3516 $1.99 each
• New, two conductor power cord. SPT
$4.95 $7.95 jacket. Use for lamps, clocks, etc.
• New, three conductor power cord. SJTW • New, hospital grade line cord. Clear SPECIFICATIONS • Two prong male plug
jacket. 90° wall plug for use in tight spaces. molded ends with green dot on plug. • 18 gauge conductors • Shpg. 1/4 lb.
SPECIFICATIONS • Jacketing Type SJTW SPECIFICATIONS
• End 1 Three prong male • Conductor Gauge 16 • Jacketing Type SJT ITEM 11-3369-A White, 9 ft. long
• Conductor Gauge 18
plug • Conductor Count 3 • End 1 NEMA 5-15P ITEM 11-3369-B Brown, 12 ft. long
• Conductor Count 3 • End 2 IEC C13 • Length 96˝ • End 2 IEC 60320/C13
• Length 6 ft. • Shpg. 1/2 lb. ITEM 11-3369-C Brown, 9 ft. long
• Max Temperature 105°C • Shpg. 1 lb.
174 Specialty Switches 8 www.surpluscenter.com
Handheld Reversing Drum Switches
Two Button
Pendant • Brand new, drum type reversing switches. Heavy duty
copper contacts, painted metal housing. UL and CSA listed.
Switch Available for single or three phase operation and momentary
ITEM 11-2201 or maintained operation.
ITEM 11-3395 A B
$107.30 ITEM CONTACTS AMP PRICE
• Brand new. Wireless remote control to re- (A) 11-1901 SPNO 15 $.80
verse polarity to equipment. Ideal for linear (B) 11-3388 SPNO 15 $.99
actuators or other permanent magnet mo-
tors. Waterproof receiver. Remotes have Subminiature Microswitches
2 buttons to control output. Code learn- Subminiature size 1/4˝ x 3/4˝ x 1/2˝.
ing button on receiver with LED indicator.
Very low current draw in standby. Heavy
ITEM 11-3305 $126.55 duty leads. High power radio gives over
150 foot range with a clear line of sight.
• Brand new. Wireless remote control A B
receiver/transmitter combination. Each Includes two keychain remote transmitters. ITEM CONTACTS AMP PRICE
circuit is controlled separately from SPECIFICATIONS • Output current 40 Amp max (A)11-3322 SPNO 5 $.69
• Input voltage 12 VDC • Mount 2 tabs
transmitter. • Output 12 VDC • Size 3˝ x 3˝ x 1˝
• Code learning feature on receiver for easy polarity reversing • Shpg. 3 lbs.
programming. Select activation as long as
transmitter button is depressed or momen-
tary pulse for channels 1, 2, 6 and 7. SPST
• Ignition lockout option disables channels
1-4. Channels 1 and 2 allow for manual
Pushbutton
switch (not included) to activate in addition Switch
to remote transmitter.
• Operate from 12 Volt DC power supply
or battery. Only draws 0.15 amps.
• 100 ft. range with clear line of sight.
ITEM 11-3637 $1.99
• New, Arrow Hart model 80511E normally
Includes 2 keychain 4-pushbutton open momentary push-button switch. UL
transmitters and full. & CSA listed. Jam nut included. 11-3512-A 11-3512-B 11-3512-C
SPECIFICATIONS SPECIFICATIONS • 3 Amps @ 120 VAC
• Voltage 12 VDC • Connections
• Channel 1-2 output relay Channel 1-2,
• SPST N.O. momentary
switch
• Mounts in 12mm dia. hole
• Solder terminals
3-Button Control Station
• Relay contacts spade terminals • Contact Ratings • Shpg. 1/10 lb.
Rating 30 Amp max Channel 3-7 and power, • Brand new, RELAY & CONTROL. Steel
• Relays SPDT 10 pin connector housing with 3 momentary push buttons.
(common N.O. connection) • Mount two hole, 37/8˝ c/c
• Channels 3-7 • Size 41/8˝ x 4˝ x 11/4˝
Pushbutton NEMA 1 enclosure. Knockouts for 1˝
conduit on top/bottom.
output -500 m.a. • Shpg. 2 lbs. Switch SPECIFICATIONS 240 VAC max.
FOR ALL • Size 23/8˝ x 113/16˝ x 55/16˝
• Contact Rating 5 amps @ • Shpg. 1 lb.
Heavy Duty ITEM 11-3642 $1.99 ITEM 11-3512-A $19.45
• New, flush mount pushbutton horn
Foot Switch switch. Plated housing with 2 mounting Model PBS-601
Top Button Green OPEN
slots. Screws included.
w/Guard SPECIFICATIONS • Button 7/8˝ dia.
Middle Button Green DOWN
Lower Button Red STOP
• Contacts Normally Open
• Action Momentary
• Panel Opening 15/8˝ dia.
• Size 25/8˝ x 15/8˝ x 3/4˝ ITEM 11-3512-B
Model PBS-602
$19.45
• Terminals Screw • Shpg. 1/4 lb
Top Button Green UP
ITEM 11-3632 $17.95 Two Middle Button Green DOWN
Lower Button Red STOP
• Brand new TMAZTZ heavy duty foot
Switch. Features include momentary Button ITEM 11-3512-C $19.45
operation with SPDT switch, rugged cast
aluminum construction and oversized
Start Stop Model PBS-603
Top Button Green FORWARD
guard opening. Station Middle Button Green REVERSE
SPECIFICATIONS Lower Button Red STOP
• Model TFS-502 • Conduit Connection 1/2˝
• Contact Rating 15A,
125/250 VAC
NPT
• Nema Enclosure Type 2,
SPST ON / OFF
• Actuation Force 7 lbs. 4, 13 ITEM 11-3659 Pushbutton
• Contacts SPDT
• Switch Action Momentary
• Mounting Pattern
Triangular 33/8˝ x 71/4˝
$23.95 Switch
• Size 81/4˝ x 53/4˝ x 5˝ • Brand new, RELAY & CONTROL model ITEM 11-3478
• Finish Powder-painted
SS-1. Steel housing with 2 momen-
safety orange • Shpg. 3 lbs.
tary push buttons. Use with magnetic $1.99
starters. NEMA 1 enclosure. Knockouts for 1˝ • New, push on-push off switch. Extended
Double Pedal Footswitch conduit on top/bottom. length mounting threads. Single hole mount.
ITEM 11-3633 $39.95 SPECIFICATIONS SPECIFICATIONS
• Contact rating 6 amps 125 • Stem 3/8˝ dia. x 11/8˝
• Similar to 11-3632 but with 2 ped- • Contact Rating 5 amps @ • Lower Button Red STOP
VAC, 3 amps 250 VAC • Leads 18 gauge 6˝ long
als. Each pedal has a N.O./N.C. plunger 240 VAC max. • Size 23/8˝ x 11/2˝ x 4˝
• Switch Action Push-on/ • Size 2˝ x 7/8˝ x 3/4˝
switch. Size 81/4˝ x 9˝ x 6˝. Shpg 6 lbs. • Top Button Green START • Shpg. 1 lb.
Push off • Shpg. 1/4 lb.
178 Capacitors California
Residents ▲
!
WARNING:Cancer and Reproductive Harm
For more information refer to:www.P65Warnings.ca.gov 8 www.surpluscenter.com
1-5225 1-5226
1-5223
22-1334 22-1249
Motor Start Capacitors 22-1251 22-1337
• New, round motor start capacitors. Molded phenolic resin hous-
ing. Spade terminals. All have capacitance range of +20%/-0%. 1-5224
1-5227 1-5228
ITEM MFD MFD Range Voltage Size Shpg. Price Trailer Connectors
• Brand new, trailer connectors and adapters.
22-1331 36 36-43 220 17/16˝ dia. x 23/4˝ 1/2 lb. $1.49
22-1092 43 43-53 125 17/16˝ dia. x 23/4˝ 1/2 lb. $1.49 ITEM Description Material Shpg. Price
22-1362 43 43-53 250 17/16˝ dia. x 23/4˝ 1/2 lb. $1.99 1-5223 7 flat pin vehicle socket with cover plate. Plastic 1/2 lb. $5.10
22-1334 53 53-64 220 17/16˝ dia. x 23/4˝ 1/2 lb. $1.49 1-5224 7 flat pin cable end connector. Plastic 1/2 lb. $3.70
22-1322 59 59-70 250 113/16˝ dia. x 33/8˝ 1/2 lb. $2.99 1-5225 6 pin round vehicle socket with cover plate Die Cast 1/2 lb. $4.35
22-1324 105 105-126 250 113/16˝ dia. x 33/8˝ 1/2 lb. $2.99 1-5226 6 pin round cable end connector. Die Cast 1/2 lb. $4.10
22-1323 86 86-103 250 113/16˝ dia. x 33/8˝ 1/2 lb. $2.99 1-5227 6 pin round cable end to 7 flat pin socket Die Cast/Plastic 1/2 lb. $11.90
22-1333 88 88-108 220 17/16˝ dia. x 33/8˝ 1/2 lb. $1.49 1-5228 6 pin round to 7 pin flat adapter Plastic 1/2 lb. $4.60
Motor Run Capacitors
• New. Size does not include terminals. Shpg. 1 lb. ATC Blade Fuse Holders. ITEM Wire Gauge Price
• Brand new fuse 11-3656-18 18 $1.75
ITEM Voltage MFD Shape Size Price holders. Splices into
22-1249 370 5 Oval 25/32˝ x 15/16˝ x 25/8˝ $2.99 circuit, does not 11-3656-16 16 $1.90
22-1211 ** 330 9 Oval 11/4˝ x 2˝ x 37/8˝ $3.69 include fuse. 12˝ 11-3656-14 14 $2.25
22-1251 330 12.5 Round 13/4˝ diam. x 3˝ $4.29 long. 1/8 lb. 11-3656-12 12 $2.60
22-1212 370 12.5 Round 13/4˝ d. x 27/8˝ $4.29 11-3656-10 11-3656-10 10 $2.75
22-1344 370 15 Round 13/4˝ d. x 27/8˝ $3.99
22-1341 370 15 Oval 21/8˝ x 11/4˝ 33/4˝ $3.99
22-1354 370 20 Round 2˝ d. x 27/8˝ $3.99
12˝ Quick Disconnect Cables ▲!
• Brand new, quick disconnect cables. Ideal for
22-1336 370 22.5 Round 13/4˝ d. x 25/8˝ $3.99 applications where correct polarity connections
22-1256 370 25 Oval 215/16˝ x 115/16˝ x 25/8˝ $4.99 are critical.Color coded leads. Sold individually
22-1213 370 25 Oval 13/4˝ x 23/4˝ x 3˝ $4.99 or in packages of 20.
22-1342 370 25 Oval 21/8˝ x 11/4˝ 43/4˝ $4.99 SPECIFICATIONS • Length 12˝ • Connections 2 pin bullet type
22-1347 370 25 Round 13/4˝ d. x 27/8˝ $3.99 Individual Shpg. 1/10 lb. Package of 20 Shpg. 2 lbs.
22-1337 370 25 Round 13/4˝ d. x 23/4˝ $3.99 Wire Gauge ITEM Price ITEM Price
22-1214 * 330 30 Round 13/4˝ d. x 27/8˝ $5.29 18 11-3458-18 $2.40 11-3458-18-20 $37.95
22-1349 370 30 Round 13/4˝ d. x 37/8˝ $3.99 16 11-3458-16 $2.75 11-3458-16-20 $42.95
22-1357 370 30 Round 13/4˝ d. x 37/8˝ $3.99 14 11-3458-14 $3.15 11-3458-14-20 $47.95
22-1339 370 30 Round 13/4˝ d. x 33/8˝ $4.99 12 11-3458-12 $3.40 11-3458-12-20 $59.95
22-1216 370 40 Round 2˝ d. x 37/8˝ $6.29 10 11-3458-10 $3.60 11-3458-10-20 $64.95
22-1348 370 40 Round 13/4˝ d. x 37/8˝ $4.99
22-1338 370 40 Round 13/4˝ d. x 33/4˝ $4.99 4 Section Terminal Block
$4.99
22-1355
22-1352
370 40 Round 2˝ d. x 37/8˝
330 40 Round 13/4˝ d. x 33/16˝ $4.99 ITEM 11-3658-4 $2.75
• Brand new, Use for low voltage wiring projects.
22-1217 440 45 Round 2˝ d. x 41/4˝ $6.99 Clear plastic cover snaps in place over terminals.
22-1351 370 45 Round 2˝ d. x 37/8˝ $4.99 SPECIFICATIONS • Size 23/4˝ x 13/16˝ x 3/4˝
22-1356 370 50 Round 2˝ d. x 37/8˝ $4.99 • Sections 4 • Shpg 1/8 lb.
22-1358 370 50 Round 21/2˝ d. x 37/8˝ $4.99 ITEM 11-3658-6 $3.65
22-1345 370 50 Round 21/2˝ d. x 37/8˝ $4.99 SPECIFICATIONS • Size 39/16˝ x 13/16˝ x 3/4˝
22-1343 370 50 Round 21/2˝ d. x 27/8˝ $4.99 • Sections 6 • Shpg 1/4 lb.
22-1340 370 50 Round 2˝ d. x 33/4˝ $4.99 ITEM 11-3658-12 $5.45
** Resistor between terminals * Ground lug
SPECIFICATIONS • Size 63/8˝ x 13/16˝ x 3/4˝
Dual Rating Capacitors • Sections 12 • Shpg 1/4 lb.
• New. Size does not include terminals. Shpg. 1 lb.
ITEM Voltage MFD Shape Size Price 12 Volt DC LED Stop/Turn/
22-1223 370 20/5 Round 2˝ d. x 27/8˝ $4.79 Tail Light 5˝ Box Style
22-1226
22-1224
370 25/3 Oval
370 25/5 Oval
13/4˝ x 23/4˝ x 3˝
13/4˝ x 23/4˝ x 3˝
$4.99
$4.99
ITEM 12-1063 $11.40
• Brand new BUYERS model 5625117 red Stop-Turn-Tail box
22-1225 370 25/5 Oval 13/4˝ x 23/4˝ x 4˝ $4.99 light. For trailers under 80˝ wide, used to meet FMVSS/CMVSS
22-1268 370 25/5 Oval 215/16˝ x 115/16˝ x 25/8˝ $4.99 108 regulations. Red polycarbonate colored lens and built-in
22-1230 440 30/7.5 Oval 13/4˝ x 23/4˝ x 4˝ $5.29 reflector lens. 12˝ leads. Grounds through mounting stud.
SPECIFICATIONS • Mount Two 1/4˝-20 studs on
22-1231 440 40/4 Round 21/2˝ d. x 31/8˝ $5.49 • Stop-Turn-Tail Light 2˝ centers
22-1277 370 40/5 Round 21/2˝ diam. x 3˝ $5.49 • 12 VDC • Size 53/8˝ x 43/4˝ x 27/8˝
22-1279 440 40/7.5 Oval 321/32˝ x 131/32˝ x 43/4˝ $5.49 • LED’s 11 • Shpg. 1 lb.
22-1280 370 45/5 Oval 215/16˝ x 115/16˝ x 33/4˝ $5.69 ITEM 12-1063-P $13.20
22-1233 370 45/10 Oval 13/4˝ x 23/4˝ x 4˝ $5.69 • Same as item 12-1063 above with license plate light.
22-1234 440 45/10 Oval 13/4˝ x 23/4˝ x 47/8˝ $5.69 Model 5625117
& 800-488-3407 Wheels & Accessories 179
20 x 8.00-10 18 x 10.50-10 8˝ X 2˝ Cast
Turf Tire Smooth Tire Iron Wheel
And Wheel and Wheel ITEM 1-5482
ITEM 1-5021 ITEM 1-5511 $11.95
$27.95 $59.95 • New, cast iron wheel. Grease zerk for bore.
SPECIFICATIONS
• New take-offs, WANDA P332-04 turf tire • New CARLISLE SMOOTH model • Size 8˝ O.D. x 2˝ wide • Bearing: Caged Roller
on black 4 bolt steel rim. Not for Highway 1L0169 tire on yellow 4 bolt steel rim. • Load Capacity 1400 lbs. Bearing w/sleeve
Service. Not for Highway Service. • Bore 1/2˝ diam. • Hub Centered
SPECIFICATIONS SPECIFICATIONS • Backspace 4˝ • Bore Thru-Length 27/16˝ • Shpg. 9 lbs.
• Size 20x8.00-10 • Backspace 41/8˝ • Size 18X10.50-10 • Tubeless
• O.D. 183/4˝
• Tread Turf
• Tubeless
• Load rating 895 lbs. at 24 PSI
• O.D. 18.4˝ • Load Rating 1100 lbs. @
24 PSI
Coilover Shock Absorber
• Tread Smooth
• Tread width 77/8˝
• Mount
• Pressure less than 36 PSI
• Ply rating 4 • Tread Width 61/2˝ • Ply Rating 4 Assembly Spring
4 hole on 4˝ B.C. • Ply material nylon • Mount: • Ply Material Nylon
4 hole on 4˝ B.C. • Actual weight 22 lbs.
21/2˝ dia. pilot • Shpg. 30 lbs.
20 x 8.00-8 ITEM 28-1915-B Black Spring
Turf Tire Wheel 18 x 8.50-8 4 $11.95
Assembly Bolt Wheel • New, oil-filled coilover shock absorber.
Ideal for go-carts, mini-bikes, utility vehi-
ITEM 1-5435 Tire Assembly cles. Five adjustable ride height settings.
$29.95 ITEM 1-5518 Chrome plated body with painted spring.
SPECIFICATIONS
• New, KENDA Super Turf model K500-
002 turf tire on black 4 bolt steel rim. $42.95 • Extended Length 121/2˝ • Mounting Hole Upper 7/16˝
• Stroke 21/8˝ • Mounting Hole Lower 3/8˝
Not for Highway Service. • New CARLISLE TURFMASTER model
SPECIFICATIONS 5114041 tire on orange 4 bolt steel rim. • Spring Size 23/16˝ diam. x 81/8˝ • Mounting Hole Width 53/64˝
• Size 20x8.00-8 • Tubeless Not for Highway Service. installed height on middle • Size 21/4˝ diam. x 133/4˝
setting when extended • Shpg. 4 lbs.
• O.D. 193/4˝ • Load Rating 905 lbs. @ SPECIFICATIONS • Backspace 4˝
• Tread Turf 22 PSI
• Size 18X8.50-8 • Tubeless ITEM 28-1915-R Red Spring $11.95
• Tread Width 8˝ • Ply Rating 4 • Load Rating 1280 lbs. @
• O.D. 18˝
• Mount: 4 hole on 4˝ B.C.
21/2˝ dia. pilot
• Ply Material Nylon
• Actual Wt. 16 lbs. • Tread Turf 22 PSI
• Ply Rating 4
Coil-over Shock Absorber
• Tread Width 61/2˝
• Backspace 41/2˝ • Shpg. 30 lbs.
• Mount • Ply Material Nylon Assembly
20 x 8.0-8 Turf
• 4 hole on 4˝ B.C.
• 23/4˝ dia. pilot
• Actual weight 16 lbs.
• Shpg. 24 lbs. ITEM 28-1907 $9.95
• New takeoffs, oil filled coil-over shock
Tire Assembly 16 X 7.50-8 Turf absorber assembly. Five-way adjustable
ride height settings. Chrome plated body
ITEM 1-5173 Tread Drive with painted spring.
$39.95
• New turf tire on gray 4 bolt steel rim.
Wheel SPECIFICATIONS • Stroke 21/8˝
• Extended lgth. 121/2˝ • Mtg. hole upper 7/16˝
Not for Highway Service. ITEM 1-5447 • Spring size • Mtg. hole lower 3/8˝
SPECIFICATIONS • Backspace 43/4˝
• Size 20x8.00-8 • Tubeless
$29.95 23/16˝ dia. x 81/8˝
installed on middle
setting when extended
• Mtg. hole width 53/64˝
• Size 21/4˝ dia. x 133/4˝
• Shpg. 4 lbs.
• O.D. 183/4˝ • Load Rating 965 lbs. @ • New, KENDA Super Turf K500-05 turf
22 PSI tread tire mounted on Gray metalflake
• Tread Turf
• Tread Width 61/2˝ • Ply Rating 4 painted steel wheel. Not for highway service. 10˝ x 8˝ Steel
• Mount • Ply Material Nylon
• Actual weight 17 lbs.
SPECIFICATIONS
• Max Load 627 lbs.
Wheel Rim
• 4 hole on 4˝ B.C. • Size 16X7.50-8
• 21/2˝ dia. pilot • Shpg. 30 lbs. • O.D. 153/4˝ • Max. Pressure 24 PSI ITEM 1-5106
• Tread Turf
• Tread width 7˝
• Hub Offset
• Backspace 47/8˝ $8.95
Trailer • Mount: • Tubeless • New take-offs, black steel rim for 10˝
tires.
Bearing 4 hole on 4˝ B.C
27/8˝ center hole
• Ply Rating 4 Ply
• Shpg. 17 lbs. SPECIFICATIONS • Back Space 4˝
• Wheel Rim Size 10˝ dia. x 8˝• Pilot Opening 23/4˝ dia.
Kits • Bolt Pattern 4 on 4˝ bolt circle • Shpg. 11 lbs.
Hi-Speed Wheel Hubs
• Brand new, DURA-ROLL replacement
trailer bearing kit. Use with boat, camp-
Stud
Type
Lug Bolt
Type
8˝ x 5.5˝ Steel Wheel
ing, utility and snowmobile trailers. 1 kit Rim w/Bearings
per wheel required. Bearings must be ITEM 1-5079
packed with grease before installation.
Kit contents available at www.surplus- $5.99
center.com. Fully tested and exceeds • New take-offs, black steel
VESC regulations. Installation instructions • Brand new. Use with a 1˝ diameter rim with dual ball bearings for 8˝ tires.
included. spindle to mount high speed wheels on SPECIFICATIONS
Typical Axle small trailers. Includes grease cap, • Wheel Rim Size 8˝ X 5.5˝ • Hub 3/4˝ Bore x 31/16˝ wide
tapered roller bearings and seal. 7 lbs. • O.D. 87/8˝ • Hub Type Offset
Bearing Bore Rating
• Width 65/16˝ • Shpg. 8 lbs.
ITEM Inner Outer (lbs.) Shpg. Price Bolt
1-3535 1˝ 1˝ 2000 1 lb. $14.10 ITEM Bolts Circle Type Price 1˝ Trailer Spindle
1-3536 3/4˝ 3/4˝ 2000 1 lb. $11.65 1-1133 4 4˝ Lug Bolt $26.20
5 41/2˝ Lug Bolt $27.85
1-3537 11/4˝ 11/4˝ 2000 11/2 lb. $14.25
1-3538 13/8˝ 11/16˝ 3500 1 lb. $14.60
1-1134
1-4884 4 4˝ Stud $26.85 ITEM 1-1128 $8.10
• Brand new steel trailer spindle with cas-
1-3539 11/16˝ 11/16˝ 2000 1 lb. $14.25 1-4885 5 41/2˝ Stud $28.60 tle nut. 1˝ diam. x 81/2˝ long. Shpg. 4 lbs.
180 Pneumatic Wheels 8 www.surpluscenter.com
16 X 6.50-8 13 x 5.00-6 4.10/3.50-4 Wheel
Turf Tread Wheel Assembly
Drive Wheel Assemblies ITEM 1-4932
ITEM 1-5042 $5.95
$27.95 • New, tubeless tires on painted steel
wheel. Grease zerk for axle. NHS.
• New, pneumatic tire mounted on steel rim.
SPECIFICATIONS • Load rating 300 lbs.
• New, turf tread tire mounted on Gray • Tread Knobby
metalflake painted steel wheel. NHS. SPECIFICATIONS • Size 4.00/3.50-4
• Ball bearing • Pressure 30 PSI max.
SPECIFICATIONS • Bore Thru-Length 3˝ • Size 13X5.00-6 • Pressure 30 PSI
• Outside dia. 101/4˝ • Hub 5/8˝ bore x 2˝ wide
• Size 16X6.50-8 • Max. Pressure 30 PSI˝ • O.D. 12˝ • Hub offset 3/4˝ • Tube type • Ply rating 2
• O.D. 15˝ • Hub Offset • Tread Turf • Bushing steel • Cross section 31/4˝ • Hub type offset
• Tread Turf • Offset 3/4˝ • Tread width 4˝ • Tube type tubeless • Shpg. 5 lbs.
• Tread width 6˝ • Tubeless • Bore 3/4˝ diam. • Ply rating 2 Ply
• Bore 3/4˝ diam., 3/16˝ • Ply Rating 2 Ply • Bore thru-length 3˝ • Shpg. 8 lbs. 4.10/3.50-4 Wheel
keyway • Shpg. 15 lbs.
ITEM 1-4068-G $19.99 Assembly
16 x 4.50-8 Wheel • Gray painted steel wheel.
Assembly ITEM 1-4068-O $19.99 ITEM
$4.95
1-5319
• Orange painted steel wheel.
ITEM 1-4890 • New, rubber tire on plated steel 3 piece
$11.95 13 x 5.00-6 wheel. Offset hub. Not for highway use.
SPECIFICATIONS
• New, pneumatic tire mounted on steel rim.
SPECIFICATIONS
Wheel • Size 4.10/3.50-4 • Tube Type
• Load Range A 300 lbs.
• O.D. 10˝
• Size 16x4.50-8 • Hub type offset Assembly • Bore 5/8˝ dia. max.
• Outside dia. 151/2˝ • Bearing plastic bushing • Thru Bore Length 115/16˝ • Pressure 30 PSI max.
• Cross section 33/4˝ • Tube type ITEM 1-4143 • Tread Sawtooth • Ply Rating 2
• Tread Turf
• Hub 5/8˝ bore x 31/2˝ wide
• Ply rating 4
• Shpg. 9 lbs. $16.95 • Tread Width 21/4˝ • Shpg. 5 lbs.
• New, tube type tire on orange painted
4.10/3.50-4 Wheel steel wheel. Not for highway service. 4.00-6 Flat Free
Grease zerk for axle. Wheel
Assembly SPECIFICATIONS •
• Size 13X5.00-6 • Pressure 30 PSI ITEM 1-5469
ITEM 1-4889
$2.99
• O.D. 13˝
• Tread Turf
• Hub Offset 3/4˝
• Bushing Steel $18.95
• Tread width 4˝ • Tube Type • New, foam filled tire on two piece gray
• New, pneumatic tire mounted on plastic • Bore 3/4˝ diam. • Ply Rating 2 Ply steel wheel with ball bearings. Not for
rim. Tires may be dusty and have some • Bore Thru-Length 3˝ • Shpg. 8 lbs. Highway Service.
grime on them from warehouse storage. SPECIFICATIONS • Hub 1/2˝ bore x 21/4˝ wide
SPECIFICATIONS
• Size 4.00/3.50-4 • Bearing Plastic bushing
10.0 x 3.50-4 • Size 4.00-6 • Offset 3/4˝
• O.D. 13˝ • Tubeless
• Outside Diameter 101/4˝ • Tire Tube type Solid Rubber • Tread Block • Load Rating 300 lbs.
• Cross section 31/4˝
• Tread Knobby
• Load Rating 300 lbs.
• Pressure 30 PSI max. Wheel • Cross section 4˝ • Shpg. 7 lbs.
• Hub 5/8˝ bore x 27/16˝ wide • Ply Rating 2 ITEM 1-5360 4.00-6
$14.95
• Hub Type Offset • Shpg. 5 lbs.
Wheelbarrow
15 x 5.00-6 Pair • New, Solid rubber tire on steel rim with
axle. Centered axle is 3/4˝ diameter by 41/4˝
Wheel
Lug Wheels long with retention snap rings. ITEM 1-4147
ITEM 1-5116 SPECIFICATIONS
$15.95
$28.95 • Size 10 x 3.5-4 • Bore 3/4˝
• Outside Diameter 10˝ dia. • Bore Thru-Length 21/4˝ • New, CARLISLE wheelbarrow tire on
• New pair of CARLISLE model XTRAC • Cross Section 3.5˝ Wide • Hub Type Centered steel wheel with steel bushings. Not for
directional snowblower tires mounted on • Tread Knobby • Bearing Ball Bearing Hi-way Service.
black painted steel wheels. 1/4˝ diameter • Tread Width 3˝ • Shpg. 13 lbs. SPECIFICATIONS
cross-hole for drive pin. NHS • Size 4.00-6 • Tubeless
SPECIFICATIONS • O.D. 13˝ • Load rating 330 lbs.
• Size 15x5.00-6 • Hub Bore 1˝ diam. 4.80 x 4.0-8˝ Wheel • Tread ribbed
• Cross section 4˝
• Pressure 30 PSI max.
• Ply rating 2
• O.D. 14˝
• Tread Directional lug
• Hub Thru-Length 53/4˝
• Hub Offset 11/2˝ and Tire • Hub 5/8˝ bore x 7˝ wide • Shpg. 6 lbs.
• Tread width 4˝ • Tubeless
• Load Range 790 lbs. (pair) • Ply Rating 2 Ply
Assembly 3.50 x 8-2.25
• Max. Pressure 20 PSI • Shpg. 28 lbs. ITEM 1-5443 Flat-Free
13 x 6.50-6 $39.95 Wheelbarrow
Smooth Tread • New, 153/4˝ x 41/2˝ Pneumatic tire mounted
on steel rim. Ideal replacement log split- Wheel
Turf Tire ter and small trailer wheel for high speed ITEM 1-5485
ITEM 1-5112 $14.95 trailer use. Grease seal and roller bearings
in the hub. Dust cover NOT included. $21.95
• New, CARLISLE smooth tread turf tire. SPECIFICATIONS • Bore Thru-Length 33/4˝ • New, Carlisle Reliance Hybrid flat free
Model 5121861. Not for Highway Ser- • Size 4.80x4.0-8 • Hub Type Center wheelbarrow wheel with ball bearings.
vice. Often used on ZTR mowers • Outside Diameter 151/4˝ • Bearing Roller Bearing Steel wheel. Not for Highway Service.
SPECIFICATIONS • Tubeless dia. • Tire Tubeless Semi pneumatic
• Size 13x6.50-6 • Load Rating 480 lbs. @ • Cross Section 23/4˝ Wide • Load Rating 390 lbs. SPECIFICATIONS • Cross section 31/2˝
• O.D. 12.9˝ 28 PSI • Tread Saw Tooth • Pressure 30 PSI max. • Size 3.50 x 8-2.25 • Bore Thru-Length 61/4˝
• Tread Smooth • Ply Rating 4 • Tread Width 33/4˝ • Ply Rating 4 • O.D. 14˝ • Hub 5/8˝ bore x 61/4˝ wide
• Mounted Width 5.9˝ • Ply Material Nylon • Bore 1˝ • Shpg. 13 lbs. • Tread Ribbed • Load Rating 375 lbs. max.
• Rim Width 4.5˝ • Shpg. 6 lbs. • Tread Width 33/8˝ • Shpg. 11 lbs.
& 800-488-3407 Wheels 181
12˝ x 3.0 Semi- 4.10-6 4.80/4.00-8
Pneumatic Pneumatic Wheel
Wheel Drive Wheel ITEM 1-4982
ITEM 1-116172 ITEM 1-3932 $14.95
$9.95
• New, Semi-Pneumatic tire on a steel rim.
$27.99 • New. Diamond tread, tube-type tire
mounted on red painted steel wheel. NHS.
• New, snowblower drive wheel. AMERI- SPECIFICATIONS
SPECIFICATIONS CANA SnowPro tire on gray steel rim. • Size 4.80/4.00-8 • 300 lb. max. load.
• Size 12˝x3˝ • Bore 5/8˝ • 15˝ O.D. x 3-3/4˝ wide • 2 ply rating
• Outside Diameter 12˝ dia. • Bore Thru-Length 23/16˝ SPECIFICATIONS • Hub 3/4˝ bore x 41/4˝,
• Size 4.10-6 5/16˝ crosshole • 5/8˝ bore w/ball bearings • 30 PSI max.
• Cross Section 3˝ Wide • Hub Type Offset • Centered hub, 6˝ wide • Shpg. 8 lbs.
• O.D. 12˝ • Pressure 24 PSI max.
• Tread Ribbed • Bearing Bushing • Tread knobby • Ply rating 2
• Tread Width 23/8˝ • Shpg. 11 lbs. • Tread width 3˝
• Tubeless
• Ply material nylon
• Shpg. 5 lbs. 4˝ x 2˝
10˝ X 15/8˝ 4.10/3.50-6 Polypropylene
Plastic Wheel Wheel
Wheel Assembly ITEM 1-5164
ITEM 1-4834 ITEM 1-4682 $2.99
$4.99
• New plastic wheel made from recycled $7.99
• New, TENTE black,
polypropylene wheel.
material. Offset hub extends out 1˝ on • New, rubber tire on white steel wheel. SPECIFICATIONS • Bearing Bushing
one side. Offset hub. NHS. • Wheel Diameter 4˝ (3.94˝) • Wheel Tread Material
SPECIFICATIONS • Bore 5/8˝ dia. SPECIFICATIONS • Hub Offset 3/4˝ • Wheel Width 2˝ Polypropylene
• Size 4.10/3.50-6 • Tire Type Tube • Load Capacity 440 lbs. • Caster Wheel Core
• Size 10˝ dia. x 15/8˝ wide • Thru-Length 23/4˝
• O.D. 12˝ • Load Rating 300 lbs. max Material Polypropylene
• Tread smooth • Shpg. 3 lbs. • Bore 1/2˝ dia.
• Tread Sawtooth • Load Range B • Wheel Tread Color Black
• Bore Thru-Length 21/2˝
• Tread Width 23/4˝ • Pressure 30 PSI max • Shpg. 3 lbs.
8˝ X 13/4˝ Solid • Bore 5/8˝ ball bearing • Ply Rating 2 • Hub Centered
Rubber Wheel • Bore Thru-Length 31/4˝ • Shpg. 6 lbs. ITEM 1-5165 $3.99
Assembly 4.10/3.50-4 • 5˝ x 2˝ Wheel.
$4.99 Wheel 6˝ X 2˝
• New Jarvis wheel. Blue thermoplastic ITEM 1-4146 Polyurethane
rubber flat face tread bonded to polyole-
fin wheel. Thermoplastic tread resistant to
harsh impacts and withstands oil, grease,
$9.95 Wheel
• New, PJ molded balloon rubber tire on ITEM 1-5103
solvents, cleaning compounds and other
chemicals. Centered hub.
SPECIFICATIONS
aluminum wheel. Quiet cushioned rolling
and easy swiveling with crowned design. $3.95
• New, molded blue polyurethane tire on
Extremely resilient.
• Diameter 8˝ • Bore Width 2˝ polyolefin wheel. High load capacity yet
• Temperature Range -40° SPECIFICATIONS bearing (not included)
• Width 11/2˝ • Size 8˝ O.D. x 21/4˝ wide • Bore Thru-Length 1.9˝ very light.
• Load Capacity 800 lbs. to 180°F
• Shpg. 2 lbs. • Load Capacity 450 lbs. • Hub Offset SPECIFICATIONS • Bore Thru-Length 21/8˝
• Bore 1.36˝ • Size 6˝ O.D. x 2˝ wide • Hub Centered
• Bore 13/8˝ diam. to accept • Shpg. 5 lbs.
• Load Capacity 900 lbs. • Shpg. 2 lbs.
8˝ x 21/4˝ Rubber 8˝ x 2˝ Blue • Bore 1.18˝ diam.
Wheel Polyurethane 5˝ x 2˝ Caster
ITEM 1-4086
Wheel Wheel w/Bearing
$13.99 ITEM 1-5027 ITEM 1-4181-A
• New, molded donut rubber tire on
aluminum wheel. Quiet cushioned rolling
and easy swiveling with crowned design.
$3.95 $4.99
• New, COLSON blue polyurethane tire on • New Phenolic caster wheel w/roller
Extremely resilient. gray polyolefin ribbed wheel. Quiet cush- bearing. Sleeve not included.
SPECIFICATIONS • Bore thru-length 21/4˝ ioned rolling. Smooth bore designed for SPECIFICATIONS • Bore 3/4˝
• Size 8˝ O.D. x 21/4˝ wide • Bearing ball ball bearings (not included). • Diameter 5˝ • Hub Width 23/8˝
• Load capacity 550 lbs. • Hub centered
• Bore 1/2˝ diam. • Shpg. 5 lbs. SPECIFICATIONS • Bore Thru-Length 23/8˝ • Width 2˝ • Temperature Range -30°
• Size 8˝ O.D. x 2˝ wide • Bearing none • Load Capacity 1000 lbs. to 180°F
• Shpg. 3 lbs.
8˝ X 2˝ Rubber • Load Capacity 1000 lbs.
• Bore 13/16˝
• Hub Centered
• Shpg. 3 lbs.
• Bearing Type Roller
on Polyolefin 5˝ x 2˝ Composite
Wheel 8˝ x 1˝ Foam
Filled Wheel Ball Bearing
ITEM 1-4342
Wheel
$3.95 ITEM 1-5483
• New, COLSON Performa molded $4.95 ITEM 1-4702
donut rubber tire on polyolefin wheel.
Non-marking. Quiet cushioned rolling • NEW, Solid foam filled wheel with soft $4.99
and easy swiveling with crowned design. plastic tred on a plastic rim. Commonly • New PEMCO ball bearing wheel. Dark
Smooth bore designed for ball bearings used for wheel chair front tires. blue polyurethane tread molded to poly-
(not included). Grease zerk. SPECIFICATIONS olefin wheel. Resistant to impacts and oil,
SPECIFICATIONS • Bore Thru-Length 13/4˝ • Size 8˝x 1˝ • Bore Thru-Length 25/16˝ grease, solvents, cleaning compounds
• Size 8˝ O.D. x 2˝ wide • Bearing none • Outside Diameter 8˝ dia. • Hub Type Centered and other chemicals. Centered hub.
• Load Capacity 600 lbs. • Hub Offset • Cross Section 1˝ Wide • Bearing Ball Bearing SPECIFICATIONS • Bore 1/2˝
• Bore 1.36˝ • Shpg. 2 lbs. • Tread Ribbed • Tire Solid Foam Filled • Diameter 5˝ • Hub width 21/2˝
• Tread Width 1˝ • Ply Rating 2 • Width 2˝ • Temp. range -40° to 180°F
8˝ X 2˝ TPR • Bore 5/16˝ • Shpg. 1 lbs. • Load capacity 750 lbs. • Shpg. 2 lbs.
Wheel 5˝ x 11/4˝
77/8˝ X 11/4˝
ITEM 1-4837
Caster Polyolefin
$7.95
• New ALBION Xtra-Soft wheel. Special Wheel Wheel
anti-microbial material. Thermoplastic
rubber (TPR) tread bonded to polyole- ITEM 1-4498 ITEM 1-4009
fin wheel. Rounded profile for easier
swiveling. Centered hub. Ball Bearings. $7.95 .39 ¢
Non-marking tread. • New, RHOMBUS caster wheel. Solid • Used, good condition. JARVIS Model
SPECIFICATIONS rubber tire on plated steel rim. Ball bear- 5513JKOSM solid polyolefin wheel.
• Diameter 8˝ • Hub Width 27/16˝ ing in hub. Steel thread guards. No bearing.
• Width 2˝ • Temperature Range -45° SPECIFICATIONS • Hub 5/16˝ dia. SPECIFICATIONS • Bore 3/8˝ dia.
• Load Capacity 500 lbs. to 180°F • Wheel Size 77/8˝ dia. x 11/4˝ • Length thru hub 1.46˝ • Size 5˝ dia. x 11/4˝ wide • Hub thru- length 11/2˝
• Bore 1/2˝ • Shpg. 3 lbs. • Load Capacity 280 lbs. • Shpg. 4 lbs. • Load capacity 300 lbs. • Shpg. 11/2 lbs.
184 Miscellaneous Wheels 8 www.surpluscenter.com
Rubber Tire on Plastic Wheels
• New CEW rubber tire on plastic wheel.
ITEM Dia. Width Tread Bore Thru-Length Shpg. Price
1-4120 8˝ 15/8˝ Diamond 1/2˝ dia. Smooth 11/2˝ 11/4 lbs. $2.99 1-4120 1-4125
1-4121 8˝ 15/8˝ Ribbed 1/2˝ dia. Smooth 17/16˝ 11/4 lbs. $2.99
1-4123 8˝ 15/8˝ Diamond 1/2˝ dia. Smooth 15/8˝ 11/4 lbs. $2.99
1-4125 8˝ 15/8˝ Ribbed 1/2˝ dia. Smooth 11/2˝ 11/4 lbs. $2.99
1-4126 8˝ 13/4˝ Diamond 3/8˝ dia. Smooth 11/2˝ 11/4 lbs. $2.99
1-4127 8˝ 13/4˝ Diamond 3/8˝ dia. Smooth 11/2˝ 11/4 lbs. $2.99 1-5454 1-5452
1-5454 81/2˝ 11/2˝ Bar 5/8˝ dia. Smooth 11/2˝ 1 lbs. $4.95
1-4130 10˝ 13/4˝ Ribbed 5/8˝ dia. Smooth 21/16˝ 11/2 lbs. $3.99
1-4131 10˝ 13/4˝ Diamond 5/8˝ dia. Smooth 21/4˝ 11/2 lbs. $3.99
1-5451 10˝ 13/4˝ Block 5/8˝ dia. Smooth 11/2˝ 21/2 lbs. $4.95
1-5452 10˝ 13/4˝ Bar 5/8˝ dia. Smooth 11/2˝ 21/2 lbs. $4.95
1-5461 10˝ 13/4˝ Block 5/8˝ dia. Smooth 11/2˝ 21/2 lbs. $3.99
1-5060 12˝ 13/4˝ Diamond 1/2˝ dia. Smooth 13/4˝ 11/2 lbs. $3.99 1-4131 1-5060
$6.99
5SP01052GSSM • Bolt Holes 5/16˝ dia. • Mounting Height 33/4˝ • Shpg. 2 lbs.
• Wheel Diameter 5˝ dia. • Wheel Tread Material Soft
• Wheel Width 11/4˝ Wide Rubber
• Wheel Tread Color Black
• New, RHOMBUS swivel plate caster.
Metal lever single position swivel lock (does
21/2˝ x 11/8˝ Swivel
• Load Capacity 200 lbs.
• Mounting Height 61/8˝ • Caster Wheel Core Materi- not lock wheel). Thermoplastic polyure- Plate Caster
• Brake None al Soft Rubber thane wheel with plastic wheel center.
• Caster Wheel Bearing Roller ITEM 1-5091
SPECIFICATIONS
$1.95
• Top Plate 35/8˝ x 21/2˝ x
1/8˝ thick • Shpg. 3 lbs. • Wheel size • Mounting height 63/8˝
125mm (5˝) x 32mm (11/4˝) • Mount 4 bolt on • New, COLSON plate caster. Ball bearing
5˝ x 11/4˝ Scaffold • Load capacity 17/8˝ x 27/8˝ ctrs. in swivel head.
100 kg or 220 lbs. • Bolt holes 5/16˝ diam.
Caster • Top plate 23/4˝ x 33/4˝ x 1/8˝ • Shpg. 3 lbs. SPECIFICATIONS
• Wheel Size 21/2˝x 11/8˝w. • Mount Four holes on 3˝ x
w/Brake • Load Capacity 200 lbs. 13/4˝ centers
3˝ x 15/16˝ • Mounting Height 33/16˝ • Bolt Holes 5/16˝ dia.
ITEM 1-5237 • Brake None • Wheel Tread Black
Swivel Plate
$9.95 Caster
• Top Plate:
313/16˝ x 23/4˝ x 1/8˝
Polyolefin
• Shpg. 2 lbs.
• New, swivel grip ring stem caster with solid
rubber wheel. Originally intended for use on ITEM 1-5036 21/2˝ x 11/8˝ Swivel
scaffolds. Circular mounting face has two
ends bent upwards 90 degrees on either
side of the stem, inside width of 19/16˝. Wheel
$1.99 Plate Caster
• New, COLSON model# LTP3356142 plate ITEM 1-5403
and swivel lock. Swivel has double-row ball caster. Ball bearing in swivel head.
bearings. Zinc plated caster yoke. SPECIFICATIONS • Mount Four slots on 215/16˝ $1.95
SPECIFICATIONS • Wheel Size 3˝x 15/16˝w. x 13/4˝ centers • New, Colson swivel plate caster.
• Wheel Size 5˝ dia.x 11/4˝ w. • Mount 26mm (1.025˝) dia. x • Load Capacity 90 lbs. • Bolt Holes 3/8˝ x 5/16˝ SPECIFICATIONS
• Load Capacity 264 lbs. 23/4˝ w/ circlip • Mounting Height 33/4˝ • Wheel Tread Grey • Wheel Diameter 21/2˝ dia. • Bolt Holes 5/16˝ dia.
• Mounting Height 63/8˝ • Mount 26mm (1.025˝) dia. x • Brake None Thermoplastic Rubber • Wheel Width 11/8˝ Wide • Wheel Tread Brown Hard
23/4˝ w/ circlip • Load Capacity 175 lbs. Rubber
• Brake Wheel and Swivel • Top Plate 35/8˝ x 29/16˝ x 1/8˝ • Shpg. 2 lbs. • Caster Wheel Core
Lock • Stem through Holes 7/16˝ dia. • Mounting Height 3˝
• Brake Wheel lock Material Plastic
• Mount 26mm (1.025˝) dia. x • Wheel Tread Black Rubber
23/4˝ w/ circlip • Shpg. 4 lbs. 3˝ x 113/16˝ • Top Plate 313/16˝ x 23/4˝ • Caster Wheel Bearing
• Mount 4 holes on 3˝ x 13/4˝ Nylon
Swivel Plate • Shpg. 2 lbs.
5˝ x 15/16˝ Swivel centers
Caster
Plate Caster 11/2˝ x 11/8˝ Swivel
ITEM 1-1195
w/Brake Plate Caster
ITEM 1-5244
$3.99 ITEM 1-5376
• Removed from service. FAULTLESS
$4.95 heavy duty swivel plate caster. Low
profile design. Glass filled nylon wheel.
$1.95
• New, COLSON swivel plate caster with • New, TENTE swivel plate caster.
hard plastic wheel. Swivel plate has dou- Roller wheel bearing with swivel ball SPECIFICATIONS • Mount 4 holes on 11/8˝ x
ble-row ball bearings. Zinc plated steel yoke. bearing plate. • Model Number 5920 PJI 11/8˝ centers
SPECIFICATIONS SPECIFICATIONS 040 P41 • Bolt Holes 3/16˝ dia.
• Wheel Size 5˝ dia.x 15/16˝ w. • Mount 4 holes on 31/16˝ x • Wheel size • Mounting height 331/32˝ • Wheel Diameter 1.5˝ • Wheel Tread Gray TPR
• Load Capacity 125 lbs. 13/4˝ centers 3˝ diam. x 113/16˝ wide • Mount four bolt on • Wheel Width Dual wheels • Caster Wheel Core
• Bolt Holes 5/16˝ dia. • Load capacity 700 lbs. 33/8˝ x 23/8˝ centers 1.375˝ total treat width • Material Phenolic
• Mounting Height 513/16˝
• Wheel Tread Grey • Top plate • Bolt holes 5/16˝ diam. • Load Capacity 35 lbs. • Caster Wheel Bearing
• Brake Wheel Lock 31/8˝ x 41/8˝ x 3/16˝ thick • Shpg. 3 lbs. • Mounting Height 21/8˝ Plain
• Top Plate 35/8˝ x 21/2˝ x Thermoplastic Rubber • Top Plate 11/2˝ x 11/2˝ x 1/8˝ • Shpg. 1/4 lbs.
3/32˝ thick • Shpg. 11/2 lbs. thick
188 Swivel Casters 8 www.surpluscenter.com
Swivel Plate Casters
New, various manufacturers plate mount swivel casters.
* Brake ** Directional Lock *** Brake and Directional Lock
ITEM Wheel Size Load Capacity Wheel Material Mtg. Height Shpg. Price
1-4963* 21/2˝x 11/8˝ 100 Soft Rubber 31/4˝ 2 lbs. $1.95
1-5294 3˝ x 11/4˝ 180 Thermo-plastic Rubber 33/4˝ 2.5 lbs. $2.95
1-4249 3˝ x 111/16˝ 500 Polypropylene 4˝ 3 lbs. $4.95 1-4249 1-5098
1-5192 3˝ x 113/16˝ 400 Polyolefin 4˝ 3 lbs. $2.95
1-5192-B* 3˝ x 113/16˝ 400 Polyolefin 4˝ 3 lbs. $3.95
1-5098 31/2˝ x 11/4˝ 250 Polypropylene 41/2˝ 2 lbs. $3.95
1-4325 4˝ x 15/16˝ 140 Polyolefin 413/16˝ 1 lb. $1.95
1-5037* 4˝ x 15/16˝ 135 Rubber 43/4˝ 2 lbs. $2.99
1-4213 4˝ x 11/4˝ 350 Polyolefin 53/16˝ 3 lbs. $4.95 1-5037 1-5418
1-5418 4˝ x 11/4˝ 140 Polyolefin 51/4˝ 2.5 lbs. $2.95
1-5404 4˝ x 13/8˝ 200 Hard Plastic 5˝ 3 lbs. $2.95
1-5420 4˝ x 11/2˝ 150 Rubber 5˝ 2.5 lbs. $2.95
1-5088 4˝ x 115/16˝ 358 Polyolefin 47/8˝ 5 lbs. $4.95
1-4958 4˝ x 15/8˝ 420 Hard Rubber 5˝ 4 lbs. $4.95
1-5018 5˝ x 1˝ 125 Thermo-plastic Rubber 53/4˝ 3 lbs. $2.99
1-4299 *** 5˝ x 11/4˝ 280 Thermo-plastic Rubber 67/16˝ 2 lbs. $11.95
1-4298
1-4576 *** 5˝ x 11/4˝ 300 Thermo-plastic Rubber 67/8˝ 3 lbs. $4.95 1-5018
1-4298 *** 6˝ x 11/4˝ 300 Thermo-plastic Rubber 77/16˝ 2 lbs. $11.95
2˝ Ball Caster 23/4˝ x 13/8˝ Faultless 3˝ x 11/4˝ Swivel
ITEM 1-5053 Air Cargo Caster w/ Brake
99¢ Swivel Caster ITEM 1-5412 $3.95
• New, SHEPHERD die cast ITEM 1-5345 • New, Colson swivel
plate caster.
ball wheel caster. No exposed
axle, easy rolling. Use for
furniture, office equipment.
$4.99 SPECIFICATIONS
• New, FAULTLESS model 26382 swivel • Wheel Diameter 3˝ dia. • Bolt Holes 5/16˝ dia.
Bright brass finish. plate air cargo caster. Corrosion resistant • Wheel Width 11/4˝ Wide • Wheel Tread Material
SPECIFICATIONS • Mounting Plate 11/2˝ x 11/2˝ zinc dichromate plated yoke. Polyflex • Load Capacity 180 lbs. Thermoplastic Rubber
• Wheel Size 2˝ dia. • Mount 4 countersunk wheel. Needle wheel bearings. Precision • Mounting Height 33/4˝ • Wheel Tread Color Gray
• Load Capacity 75 lbs. holes, 3/16˝ dia. , 1˝ x 1˝ • Brake Wheel lock • Caster Wheel Core
sealed ball bearing swivel. Toe protection
• Mounting height 21/2˝ • Shpg. 1/2 lb. • Top Plate 41/8˝ x 31/8˝ Material Plastic
flange and metal thread guards. Fully
21/2˝ Ball Caster sealed raceway. Heavy duty 3/8˝ dia. axle. • Mount 4 holes on 31/2˝ x • Caster Wheel Bearing Ball
ITEM 1-5054 $1.29 SPECIFICATIONS • Mounting height 4-/32˝
• Wheel Size 23/4˝ dia. x • Mount 2 bolt on 39/16˝
23/8˝ centers • Shpg. 2.5 lbs.
ITEM 1-3228
Plate Caster • Mounting height 61/4˝ • Shpg. 3 lbs.
$3.95 1˝
1˝
Dyna Tred TPR Gray
Solid Soft Rubber
Zinc Plated
Zinc Plated
180 lbs.
175 lbs.
1-3377
1-3327
• New, FAULTLESS swivel threaded stem
caster. Zinc plated yoke. Solid soft rubber 11/2˝ Dyna Tred TPR Gray Zinc Plated 180 lbs. 1-3408
wheel. 11/2˝ Soft Rubber on Plastic Wheel Black Oxide 175 lbs. 1-3363
SPECIFICATIONS 11/2˝ Solid Soft Rubber Zinc Plated 175 lbs. 1-3331 1-3330
• Wheel 3˝ dia. x 13/16˝ w. • Mounting height 319/32˝
• Load capacity 90 lbs. • Mount 3/8˝-16 x 5/8˝ long 11/2˝ Solid Polypropylene Zinc Plated 270 lbs. 1-3325
• Stem threaded • Shpg. 3/4 lb. 11/2˝ Solid Polypropylene Black Oxide 270 lbs. 1-3342
& 800-488-3407 Swivel Stem & Grip Ring Casters 191
5˝ x 11/2˝ Swivel 5˝ x 15/16˝ Swivel 3˝ x 11/4˝ Stem
Stem Caster Stem Caster Swivel
w/ Swivel & Wheel Lock w/ Wheel Lock Caster
ITEM 1-3311 ITEM 1-3307
$19.99 $5.99 ITEM 1-2404
• New, FAULTLESS swivel stem caster.
Originally intended for scaffold. Swivel and
wheel lock. Solid hard rubber wheel. Zinc
• New FAULTLESS swivel stem caster
with wheel lock. Thermoplastic tire on
black polypropylene wheel.
$5.99
• New. Swivel stem caster with 3˝ diam.
plated steel yoke. SPECIFICATIONS • Mounting height 53/4˝ x 11/4˝ wide solid polypropylene wheel.
SPECIFICATIONS • Wheel size 5˝ x 15/16˝ • Stem threaded 1/2˝-13 x 11/2˝ 1˝-12 diam. x 51/8˝ threaded stem. Working
• Wheel size 5˝ x 11/2˝ • Stem friction grip stem • Load capacity 125 lbs. • Shpg. 11/2 lbs. height 41/4˝ (floor to base of stem). Load
• Load capacity 325 lbs. mount 1˝ dia. x 21/2˝ capacity 100 lbs. Shpg. 5 lbs.
• Mounting height 61/4˝ • Shpg. 6 lbs. 5˝ x 15/16˝ Threaded
5˝ x 11/4˝ Swivel Stem Swivel 3˝ x 11/4˝ Swivel
Plain Stem Caster Caster Stem Caster
ITEM 1-4538 ITEM 1-4751 ITEM 1-3329
$4.95 $3.95 $2.99
• New, MEDCASTER model# • New, FAULTLESS model# 30807 • New, FAULTLESS swivel stem caster.
HC05RPP125TLCL02 plain stem caster threaded stem caster. Ball bearing in Solid hard rubber wheel. Zinc plated steel
with sheet metal threadguards and cen- swivel head. caster yoke.
tral total brake. Intended for use with SPECIFICATIONS threaded stem
SPECIFICATIONS • Mounting height 33/4˝
hospital beds. Braking mechanism is op- • Wheel Diameter 5˝ • Wheel Tread Grey TPR
• Wheel size 3˝ x 11/4˝ • Stem threaded 1/2-13 x 3/4˝
erated by rotating 11mm (0.433”) hex. • Wheel Width 15/16˝ • Caster Wheel Core TPR • Load capacity 270 lbs. • Shpg. 11/2 lbs.
SPECIFICATIONS plane stem w/ two M6- • Load Capacity 125 lbs. • Caster Wheel Bearing
1.0 tapped bolt holes • Mounting Height 53/4˝ Roller
• Wheel Size 5˝x 11/4˝
• Load Capacity 260 lbs. • Wheel Tread Grey TPR • Mount 1/2˝-13 x 11/2˝ long • Shpg. 21/2 lbs. 3˝ x 15/16˝ Swivel
• Caster Wheel Core
• Mounting Height 67/8˝
• Brake Wheel and Swivel
Material Polypropylene
5˝ x 15/16˝ Threaded Plate Caster
• Caster Wheel Bearing Ball w/ Brake
• Mount 32mm x 2˝ long • Shpg. 5 lbs.
Stem Swivel ITEM 1-4967
5˝ x 11/4˝ Swivel Square Caster w/ Brake
Stem Caster $2.49
ITEM 1-4234 • New, FAULTLESS model# 29896 plate
ITEM 1-4251 $3.95 caster with wheel brake. Ball bearing in
swivel head.
$4.95 • New, FAULTLESS model EY6522RB
1/2-13 X 11/2 W/PP/P swivel threaded stem SPECIFICATIONS x 13/4˝ centers
• New, ALBION Model 02XS05051S004 • Wheel Diameter 3˝ • Bolt Holes 3/8˝ x 5/16˝
swivel square stem caster. X-tra soft rubber caster with brake. Zinc plated steel yoke. • Wheel Tread Grey TPR
Solid polypropylene wheel. • Wheel Width 15/16˝
flat tread. Delrin bushing. Plated caster yoke. • Load Capacity 90 lbs. • Caster Wheel Core Materi-
SPECIFICATIONS • Mount square 7/8˝ x 13/4˝ SPECIFICATIONS • Stem Threaded • Mounting Height 33/4˝ al Polyolefin
• Wheel size 5˝ dia. x 11/4˝ w. long stem w/ 2 bolt holes • Wheel Size 5˝ dia. x 15/16˝ • Mounting height 513/16˝ • Caster Wheel Bearing
wide • Mount: 1/2˝-13 x 11/2˝ • Top Plate 35/8˝ x 29/16˝
• Load capacity 325 lbs. • Bolt holes 1/4˝ dia. x 1/8˝ Plain
• Square stem • Shpg. 2 lbs. • Load Capacity 150 lbs. • Shpg. 11/2 lbs.
• Mount Four slots on 215/16˝• Shpg. 2 lbs.
5˝ x 11/8˝ Swivel 43/4˝ x 1˝ Swivel 3˝ x 13/16˝ Rigid
Stem Caster Caster w/ Swivel Lock Stem Caster
ITEM 1-1591 ITEM 1-3257
ITEM 1-3394
$6.95 $4.99 $1.99
• New. Ball bearing swivel stem caster • New, swivel caster rubber tire on plastic
with 5˝ diam. x 11/8˝ wide cushion rubber wheel. Chemical, water, salt and oil resistant • New, FAULTLESS rigid stem caster.
wheel. 7/16˝ diam. x 11/2˝ stem with reten- non-marking wheel. Plastic yoke with a 11/8˝ “DYNA-TRED II” thermoplastic rubber on
tion ring. 150 lb. capacity. Shpg. 4 lbs. long metal insert where a bolt passes thru polypropylene. Zinc plated caster yoke.
the yoke and swivel. Two position swivel SPECIFICATIONS • Mounting height 31/2˝
Grip Ring Caster Sockets lock, 180° offset. Shipped with the wheel
unattached to yoke for easier installation.
• Wheel size 3˝ x 13/16˝
• Load capacity 90 lbs.
• Stem grip ring 7/16˝ dia. x 2˝
• Shpg. 1 lb.
SPECIFICATIONS
• Wheel size 43/4˝ dia. x 1˝ • Mounting height 61/2˝
• Mounting bore 1/2˝ diam. • Size 57/8˝ x 61/2˝ x 21/4˝
Caster
• Load capacity 275 lbs. • Shpg. 2 lbs. Grip Ring
4˝ x 1˝ Grip Ring Socket
1-3667 1-3668 1-5361 1-3832 1-4898 Caster
• Brand new, use to mount grip ring ITEM 1-4860
casters with 7/16˝ dia. stem into steel ITEM 1-3766
tubing. Shpg. 1/10 lb. $2.99 $1.19
ITEM Fits into Length Price • New, JARVIS swivel grip ring stem • New, FAULTLESS part
1-3667 1˝ OD 16 gauge tubing 11/2˝ $ .35 caster. Solid polyolefin wheel. Plated ER4983 square tubular grip ring
1-3668 3/4˝ OD 16 gauge tubing 11/2˝ $1.50 steel caster yoke. caster socket. Polyethylene. Set of 4.
SPECIFICATIONS SPECIFICATIONS
1-5361 9/16˝ OD 16 gauge tubing 13/8˝ $ .39 • Caster Stem 7/16˝ dia. • Minimum hole depth 17/8˝
• Wheel size 4˝ dia. x 1˝ • Stem grip ring
1-3832 5/8˝ ID Square tubing 21/8˝ $ .50 • Load capacity 150 lbs. 0.845˝ dia. x 2˝ • Tubing size 18 gauge 1˝ • Size 1.125˝ square x 2˝
1-4898 Steel Corner Bracket 15/8˝ $ .59 • Mounting height 45/8˝ • Shpg. 3 lbs. OD, 0.902 ID • Shpg. 1/4 lb.
192 Grip Ring Casters 8 www.surpluscenter.com
Grip Ring Stem Casters
• New, mixed manufacturers grip ring stem casters.
* Brake
** Directional Lock
*** Brake and Directional Lock
Item Wheel Size Load Capacity Wheel Material Stem Size Mtg. Height Shpg. Price
1-5145 2˝ x 7/16˝ 110 Polyamide 0.432˝ x 11/2˝ 21/4˝ 1/2 lb. $0.39
1-5266 2˝ x 7/16˝ 75 Nylon 7/16˝ x 17/16˝ 21/4˝ 1/2 lb. $0.39
1-5310 2˝ x 3/4˝ 80 Thermo-plastic Rubber 7/16˝ X 13/8˝ 21/2˝ 1/2 lb. $1.49
1-4611 2˝ x 3/4˝ 110 Thermo-plastic Rubber 7/16˝ x 17/16˝ 23/4˝ 1 lb. $3.95
1-4293 2˝ x 13/16˝ 80 Thermo-plastic Rubber 7/16˝ x 1˝ 25/8˝ 1/2 lb. $1.95
1-4767 2˝ x 13/16˝ 90 Polyolefin 5/16˝ x 11/2˝ 25/8˝ 1/2 lb. $0.59
1-5249* 3˝ x 3/8˝ 100 Soft Rubber 5/16˝ x 11/2 ˝ 3˝ 1 lbs. $5.95
1-5147* 3˝ x 7/16˝ 220 Polyamide 0.432˝ x 15/16 ˝ 31/8˝ 1 lbs. $1.99
1-5144 3˝ x 7/16˝ 200 Polyurethane 0.432˝ x 11/2 ˝ 33/8˝ 1 lbs. $1.99
1-5123* 3˝ x 13/16˝ 100 Thermo-plastic Rubber 0.432˝ x 2 ˝ 35/8˝ 11/2 lbs. $1.19
1-4769* 3˝ x 3/4˝ 165 Nylon 7/16˝ X 13/8˝ ˝ 3˝ 1 lbs. $0.79
1-5292* 3˝ x 7/8˝ 115 Thermo-plastic Rubber 7/16˝ X 13/8˝ 37/8˝ 11/2 lbs. $2.49
1-5121* 3˝ x 1˝ 100 Polyamide 7/16˝ x 7/8˝ 3˝ 11/2 lbs. $4.99
1-4936 3˝ X 11/4˝ 275 Thermo-plastic Rubber 7/16˝ X 13/8˝ 35/8˝ 2 lbs. $2.95
1-4897 3˝ X 11/4˝ 270 Polypropylene 7/16˝ x 13/8˝ 35/8˝ 2 lbs. $1.99
1-4324 4˝ x 15/16˝ 140 Polyolefin 7/16˝ x 11/2˝ 45/8˝ 1 lbs. $1.95
1-4233* 4˝ x 15/16˝ 140 Polypropylene 7/16˝ x 11/2˝ 45/8˝ 11/2 lbs. $3.95
1-4972 * 4˝ x 15/16˝ 110 Soft Rubber 7/16˝ x 13/8˝ 43/4˝ 2 lbs. $2.95
1-5011 4˝ X 15/16˝ 150 Hard Rubber 7/16˝ x 2˝ 43/4˝ 2 lbs. $2.95
1-4330 4˝ X 15/16˝ 115 Soft Rubber 7/8˝ x 2˝ 43/4˝ 2 lbs. $3.95
1-5090 * 4˝ x 1˝ 140 Polyolefin 7/16˝ x 11/2˝ 43/4˝ 2 lbs. $1.99
1-4973 4˝ x 1˝ 115 Thermo-plastic Rubber 7/16˝ x 13/8˝ 45/8˝ 2 lbs. $1.95
1-5410* 4˝ x 1˝ 115 Thermo-plastic Rubber 7/16˝ x 11/2˝ 43/4˝ 2 lbs. $2.95
1-4232* 5˝ x 15/16˝ 125 Thermo-plastic Rubber 7/16˝ x11/2˝ 55/8˝ 11/2 lbs. $3.95
1-4319 5˝ x 15/16˝ 150 Polyolefin 7/16˝ x 11/2˝ 55/8˝ 1 lb. $2.95
1-4316* 5˝ x 15/16˝ 150 Polyolefin 7/16˝ x 11/2˝ 55/8˝ 11/2 lbs. $3.95
1-5017 5˝ x 1˝ 125 Thermo-plastic Rubber 7/16˝ x 11/2˝ 59/16˝ 3 lbs. $1.99
1-4862 * 5˝ x 13/16˝ 350 Polyurethane 13/8˝ x 21/4˝ 6˝ 4 lbs. $3.99
1-4922 5˝ x 13/16˝ 300 Polyurethane 7/16˝ x 13/8˝ 53/4˝ 2 lbs. $5.99
1-4297*** 5˝ x 11/4˝ 280 Thermo-plastic Rubber 7/16˝ x 11/4˝ 63/8˝ 2 lbs. $5.95
1-4296* 5˝ x 11/4˝ 315 Urethane 7/16˝ x 11/4˝ 61/8˝ 3 lbs. $4.95
Faultless Grip Ring Stem Casters
• New, FAULTLESS grip ring stem casters. All have ball bearing swivels. Choose
from a wide variety of wheel construction, yoke material and with or without brakes.
• Dual brakes lock both the swivel and wheel
• Dyna Tred II and TPR are thermoplastic rubber on polypropylene wheel
Wheel Stem Stem Wheel Mounting Load
ITEM Dia. Width Dia. Length Construction Brake Frame Height Rating Shpg. Price
1-3353 3˝ 13/16˝ 7/16˝ 13/8˝ Dyna Tred II Gray No Zinc Plated 31/2˝ 90 lbs. 1 lb. $1.99
1-3306 3˝ 11/4˝ 7/16˝ 13/8˝ Solid hard rubber Yes Zinc Plated 33/4˝ 270 lbs. 2 lbs. $3.99
1-3355 3˝ 11/4˝ 7/16˝ 13/8˝ Solid Polypropylene Yes Zinc Plated 33/4˝ 270 lbs. 11/2 lbs. $3.99
1-3350 3˝ 11/4˝ 7/16˝ 13/8˝ Solid Polypropylene No Zinc Plated 33/4˝ 270 lbs. 11/2 lbs. $2.99
1-3348 3˝ 11/4˝ 7/16˝ 13/8˝ Solid Soft Rubber No Zinc Plated 33/4˝ 175 lbs. 11/2 lbs. $1.99
1-3374 3˝ 11/4˝ 7/16˝ 13/8˝ Dyna Tred TPR Black Yes Black Oxide 33/4˝ 180 lbs. 11/2 lbs. $2.99
1-3368 3˝ 11/4˝ 7/16˝ 13/8˝ Dyna Tred TPR Gray Yes Zinc Plated 33/4˝ 180 lbs. 11/2 lbs. $2.99
1-3401 3˝ 11/4˝ 7/16˝ 13/8˝ Solid Polypropylene Yes Black Oxide 31/2˝ 270 lbs. 11/2 lbs. $2.99
1-3388 3˝ 11/4˝ 7/16˝ 13/8˝ Solid Soft Rubber Yes Zinc Plated 31/2˝ 175 lbs. 11/2 lbs. $2.99
1-3362 4˝ 15/16˝ 7/16˝ 13/8˝ Dyna Tred II Gray Yes Zinc Plated 45/8˝ 115 lbs. 11/2 lbs. $3.99
1-3361 4˝ 15/16˝ 7/16˝ 13/8˝ Dyna Tred II Black Yes Zinc Plated 45/8˝ 115 lbs. 11/2 lbs. $4.99
1-3367 4˝ 15/16˝ 7/16˝ 2˝ Dyna Tred TPR Gray Yes Zinc Plated 45/8˝ 115 lbs. 11/2 lbs. $3.99
1-3349 5˝ 15/16˝ 7/16˝ 13/8˝ Dyna Tred II Black No Zinc Plated 55/8˝ 125 lbs. 11/2 lbs. $2.99
1-3360 5˝ 15/16˝ 7/16˝ 13/8˝ Dyna Tred II Gray Yes Zinc Plated 55/8˝ 125 lbs. 11/2 lbs. $3.99
1-3385 5˝ 15/16˝ 7/16˝ 13/8˝ Dyna Tred TPR Gray Yes Zinc Plated 57/8˝ 125 lbs. 11/2 lbs. $3.99
1-3387 5˝ 15/16˝ 7/16˝ 13/8˝ Dyna Tred TPR Black Yes Zinc Plated 53/4˝ 125 lbs. 11/2 lbs. $3.99
& 800-488-3407 Matched Casters 193
3˝ x 3/4˝ 4˝ x 11/2˝ 5˝ x 11/4˝
Swivel Swivel Stem Swivel
Plate Casters Casters Plate
• New, COLSON swivel
• New, JACOB HOLTZ swivel plate
caster with thermo plastic wheel. Swivel stem caster with solid Polypropylene Casters
plate has double-row ball bearings. wheel. Swivel plate has double-row ball • New, ALBION model# PCXB05051S
SPECIFICATIONS bearings. Zinc plated steel yoke. plate caster.
• Model Number 3HR-2- • Bolt Holes 3/16˝ dia. SPECIFICATIONS • Wheel Tread Material SPECIFICATIONS
CH-TPR • Wheel Tread Material • Wheel Diameter 4˝ dia. Polypropylene • Wheel Diameter 5˝x11/4˝ 215/16˝ x 13/4˝ centers
• Wheel Diameter 3˝ dia. Thermo Plastic Rubber • Wheel Width 11/2˝ Wide • Wheel Tread Color Black • Load Capacity 300 lbs. • Wheel Tread Grey
• Wheel Width 3/4˝ Wide • Wheel Tread Color Gray • Load Capacity 300 lbs. • Caster Wheel Core Material • Mounting Height 67/8˝ Polyurethane
• Load Capacity 80 lbs. • Caster Wheel Core • Mounting Height 5-3/32˝ Polypropylene • Top Plate 35/8˝ x 21/2˝ x 1/8˝ • Caster Wheel Bearing Delrin
• Mounting Height 33/4˝ Material Polyolephin • Brake None • Caster Wheel Bearing None • Mount Four slots on • Shpg. 2.5 lbs.
• Brake None • Caster Wheel Bearing • Mount 3/4˝ dia. x 27/16˝ stem • Shpg. 2 lbs.
ITEM 1-4869 $4.95
• Top Plate 13/16˝ x 2˝ Plain
• Mount 4 holes, 13/16˝ x 19/16˝ • Shpg. 1/2 lb. ITEM 1-5242 $2.95 • 5˝ x 11/4˝ Swivel Plate Caster.
ITEM 1-5342 $1.99 ITEM 1-5242-B w/brake $3.95 ITEM 1-4867 $5.95
• 3˝ x 3/4˝ Swivel Plate Caster • 5˝ x 11/4˝ Swivel Plate Caster
ITEM 1-5342-B $2.49 5˝ x 11/4˝ Swivel w/Total Brake
• 3˝ x 3/4˝ Swivel Plate Caster w/Brake Threaded Swivel Round
3˝ x 11/4˝ Stem Casters Stem Casters
• New, TENTE swivel
Swivel threaded stem caster. w/Directional
Plate SPECIFICATIONS • Wheel Tread Grey
• Wheel Diameter 5˝x 11/4˝ Polyurethane Lock
Casters • Load Capacity 220 lbs. • Wheel Tread Color Grey • New, RHOMBUS round stem caster with
• New, COLSON model# GDP3356142 • Mounting Height 63/8˝ • Caster Wheel Bearing Ball three-position central brake. Intended for
plate caster with threadguards. • Mount M10-1.5 x 5/8˝ long • Shpg. 2 lbs. use with hospital beds. Braking mecha-
Ball bearing in swivel head. ITEM 1-5139 $6.99 nism operated by rotating 11mm (0.433”)
hex in crosshole.
SPECIFICATIONS slots on 37/16˝ x 23/8˝ • 5˝ x 1.25˝ Swivel Threaded Stem Caster
centers SPECIFICATIONS
• Wheel Diameter 3˝x 11/4˝
• Load Capacity 180 lbs. • Wheel Tread Grey ITEM 1-5141 $8.99 FOR ALL
w/ four
M6-1.0 tapped bolt holes
• Mounting Height 33/4˝ • Thermoplastic Rubber • 5˝ x 1.25˝ Swivel Threaded Stem Caster • Brake Wheel and Swivel • Wheel Tread Material Grey
• Top Plate 41/8˝ x 31/8˝ x 1/8˝ • Caster Wheel Bearing Plain w/Total Brake • Mount 32mm (1.259˝) Thermoplastic Rubber
• Mount Two holes and two • Shpg. 2 lbs. dia. x 50mm (1.969˝) long • Caster Wheel Bearing Ball
ITEM 1-5016 $2.99 5˝ x 7/16˝ Swivel 5˝ Diameter
• 3˝ x 11/4˝ Swivel Plate Caster Round Stem ITEM 1-4453 $8.95
ITEM 1-5045 $2.99 Casters • 5˝ x 11/4˝ Swivel Round Stem Caster
• 3˝ x 11/4˝ Swivel Plate Caster w/Brake • New, RHOMBUS mod- ITEM 1-4450 $8.95
el#383R40K125VK2351 • 5˝ x 11/4˝ Swivel Round Stem Caster
4˝ x 15/16˝ round stem caster with polyamide hous- w/Total Brake
Threaded ing and three-position central brake. In-
tended for use with hospital beds. Braking
SPECIFICATIONS
• Wheel Diameter 5˝x 11/4˝ • Mounting Height 61/4˝
Stem mechanism operated by rotating 11mm • Load Capacity 220 lbs. • Shpg. 5 lbs.
(0.433˝) hex in crosshole, has positions for
Casters 8˝ Diameter
• New, COLSON swivel threaded stem
caster. Thermoplastic rubber tread bonded
both directional lock and total lock.
SPECIFICATIONS x 100mm (3.937˝) long ITEM 1-4455 $12.95
• Wheel Diameter 5˝x 7/16˝ round stem w/ two M8- • 8˝ x 11/4˝ Swivel Round Stem Caster
to polyolefin wheel. Plated caster yoke.
SPECIFICATIONS • Threaded Stem
• Load Capacity 260 lbs.
• Mounting Height 61/4˝
1.25 tapped bolt holes
• Wheel Tread Grey ITEM 1-4452 $14.95
• Wheel Size 4˝ dia. x 15/16˝ • Mounting height 43/4˝ Thermoplastic Rubber • 8˝ x 11/4˝ Swivel Round Stem Caster
wide • Mount 1/2-13 x 11/2˝ long • Brake Wheel and Swivel • Caster Wheel Bearing Ball w/Total Brake
• Mount 28mm (1.102˝) • Shpg. 6 lbs.
• Load Capacity 135 lbs. • Shpg. 2 lbs. SPECIFICATIONS
ITEM 1-5038 $1.99 ITEM 1-4446 $14.95 • Wheel Diameter 8˝x 11/4˝
• Load Capacity 260 lbs.
• Mounting Height 95/16˝
• Shpg. 6 lbs.
• 5˝ x 7/16˝ Swivel Round Stem Caster
ITEM 1-5035 w/brake $2.95 ITEM 1-4444 $14.95 5˝ x 11/2˝
• 5˝ x 7/16˝ Swivel Round Stem Caster
4˝ x 11/4˝ Swivel w/Total Brake Rigid Plate
Stem Casters 4˝ x 11/2˝ Rigid Caster
• New, Durable USA
threaded swivel stem Plate Caster ITEM 1-5239
caster. Polypro wheel with
thread guards. ITEM 1-5489 $4.95
SPECIFICATIONS • Mount 1/2-13 x 23/4˝ thread-
• Wheel Diameter 4˝ dia. ed stem
$4.95 • New, JARVIS rigid plate caster with solid
Phenolic wheel. Zinc plated steel yoke.
• Wheel Material Red • New, rigid plate caster polyurethane SPECIFICATIONS
• Wheel Width 11/4˝ Wide wheel.
Polyurethane tread on • Model Number FG53R5213 • 23/8˝ centers
• Load Capacity 350 lbs. Polyolefin wheel SPECIFICATIONS
• Mounting Height 53/4˝ • Wheel Diameter 4˝ dia. • Bolt Holes 7/16˝ dia. • Wheel Diameter 5˝ dia. • Bolt Holes 5/16˝ dia.
• Caster Wheel Bearing Ball • Wheel Width 11/2˝ Wide • Wheel Tread Material
• Brake None • Shpg. 2 lbs. • Wheel Width 11/2˝ Wide • Wheel Tread Material Red
• Load Capacity 400 lbs. Phenolic
ITEM 1-5486 $4.75 • Load Capacity 400 lbs.
• Mounting Height 51/2˝
Polyurethane
• Caster Wheel Core • Mounting Height 61/4˝ • Wheel Tread Color Black
• Caster Wheel Core Materi-
• 3˝ x 3/4˝ Swivel Plate Caster • Top Plate 41/2˝ x 37/8˝ x Material Polypropylene • Brake None
al Phenolic
ITEM 1-5486-B $5.95 3/16˝ thick
• Mount 4 holes on 25/8˝ x
• Caster Wheel Bearing
Bearing
• Top Plate 41/8˝ x 31/8˝ x
5/32˝ thick • Caster Wheel Bearing None
• 3˝ x 3/4˝ Swivel Plate Caster w/Brake 35/8˝ slotted to 3˝ x 3˝ • Shpg. 4 lbs. • Mount 4 holes on 37/16˝ x • Shpg. 3 lbs.
194 Caster Sets & Dual Wheel Casters 8 www.surpluscenter.com
4˝ to 8˝ Heavy Duty Casters
• Brand new. Heavy duty casters. Use on work tables, material dollies,
carts, etc. Grease zerks on swivels and axles. Roller bearings.
Choose between steel wheel and rubber tired cast iron.
SURPLUS
Vertical
Air Tank
ITEM 4-1957 SOURCE CODE
$249.95
SURPLUS CENTER
• Air tank is removed from
a complete compressor
returned to original retailer
for motor or compressor
CENTER
warranty. Vertical steel tank
with blue exterior paint.
Mount on top with holes ®
for compressor and holes
for motor. Certified by Twin
Lakes Tanks.
CATALOG 293
SPECIFICATIONS ton motor for use in open and closed loop
• Capillary Tube 48˝ • Bezel black • New, AMT Schmid GmbH gearmotors hydraulic systems. Pilot operated servo
with brake. Originally made for wheel valve on motor controls speed and direc-
chairs as a right side drive motor. Release tion from 1.9 to 6.5 cu. in. per revolution.
6.6 GPM 12 Volt DC shaft on gearbox to engage/disengage SPECIFICATIONS
Double Selector output shaft to free wheel. Ideal for high
torque DC applications.
• Disp. Max. 6.5 cu. in.
/ rev.
• Rotation Reversible
• Mount Four bolt on
Valve SPECIFICATIONS • Rotation Reversible • Disp. Pilot Control Valve 200mm (7.874˝) bolt cir-
• Speed 162 RPM no load • Duty Intermittent Setting Range 1.9 cu. in. cle with 160mm (6.299˝)
2020 EDITION
ITEM 9-12390 max (nominal perfor- • Enclosure TEFC /rev. to 6.5 cu. in. / rev pilot
$59.95 mance rating)
• Voltage Motor 24 VDC
• Base Mount 6 bolt tapped
M6x1
• Control Valve Pilot
operated
• Shaft 40mm dia.
18T spline, DIN 5480
• New, WALVOIL model DFE080 12 volt • Motor Type Piston W40x2x30x18x9g
DC solenoid operated double selector • Voltage Brake 12 VDC • Shaft 23.5mm max. dia.
• Amperage 4.5 Amps no x 35.8mm 14.25° ta- • Pressure 6000 PSI max. • Ports Size 16 4 bolt
valve. Allows one directional valve to op- load pered w/woodruff key and • Pilot Control Valve Pres- flange 27.8mm (1.094˝)
erate two independent cylinders. Energiz- • Torque 796 in.lbs. M12x1.75 threaded end sure 348 PSI x 57.2mm (2.25") bolt
ing coil shifts from cylinder 1 to cylinder • Torque Brake 530 in. lbs. • Size 14˝ x 31/2˝ x 5˝ • Flow 100 GPM max. centers w/25mm (1˝) port
2. Ideal for adding a “thumb” to buckets • Gear Ratio 26.2 • Shpg. 19 lbs. • Power 339 HP @ 3550 • Control Ports M12x1.5
on loaders. RPM, 5800 PSI (calcu- with GE-8LM steel line
SPECIFICATIONS ITEM 5-1919-R $119.95 lated) adapters
• Flow Rate 6.6 GPM • Ports Six SAE 4 RH model 013552 • Torque 502 ft-lbs. @ 3550• Case Drain M18x1.5
$119.95
• Pressure 2900 PSI max • Mount Two M6 tapped RPM, 5800 PSI • Size 111/2˝ x 71/2˝ x 131/4˝
• Coil Voltage 12 VDC holes in base ITEM 5-1919-L • Speed 3600 RPM max. • Shpg. 165 lbs.
• Current 3 amps • Size 61/4˝ x 2˝ x 25/8˝ LH model 013551
• Connector Deutsch DT-04 • Shpg. 5 lbs. More Gearmotors on Pages 159-161 Hydraulic Motors on Pages 79-84