Professional Documents
Culture Documents
The Dawn of A New Apac Era: Air Conditioning Product Range
The Dawn of A New Apac Era: Air Conditioning Product Range
Now apac is back, bigger and better than ever. Now with
backing from Rinnai, Japan’s global leader in Hot Water,
Heating and Cooling, you can rest assured apac will measure
up when the heat is on.
Quality Assurance
MEPS Compliant Built in a production facility
Engineered & Built All units are tested, compliant and with a certified quality
in Australia registered in accordance with the management system to
Quality
relevant AS/NZS standards ISO 9001
ISO9001
apac air conditioning is an important part of the Rinnai group of Rinnai Australia currently operates a number of class
Rinnai Australia was established in 1971 and since then has Flexibility Low installed cost Reduced energy costs Low noise
been providing Australians with the comfort, convenience Unmatched list of factory A perfect match to existing Best in class efficiency across Speed controlled fans
and reliability of Rinnai appliances. Our vision is to be fitted options to make apac unit size, footprint, the entire product range for that slow down during
market leaders in the provision of innovative products and the product suitable for ductwork and mains power lower power bills. lower ambient
services within our target business arenas, and to meet a most any commercial or and controls without costly temperatures for less
growing demand for value based products, environmental industrial projects. modifications. noise.
sustainability and renewable energy efficiency.
2 3
Product line-up
012 Capacity range (kW) 095 028 Capacity range (kW) 048 012 Capacity range (kW) 045
(low profile) (horizontal) (vertical) A perfect match to the apac unit size,
footprint, ductwork, mains power and
controls, avoiding costly modifications.
4 5
apac technology
6 7
Roof top package unit 012 to 095kW
• 25mm PE closed cell insulation MEPS Certified MEPS Certified/BCA Yes BCA Compliant
• MEPS certified Maximum C O
+50
• BCA compliant Operating Range
Minimum C O
-10
TOP
SUPPLY
SUPPLY TOP
TOP Capacity Steps % 0/100 0/50/100
Factory options RETURN
ETURN
Type Scroll
customised to order Compressor Starter D.O.L (Optional Soft Starter)
SIDE
• Compressor soft starter RETURN Qty 1 2
• High static pressure outdoor fans Type Hybrid Axial EC Hybrid Axial
• Phase fail protection relay
REAR Outdoor Fan Speed Control Variable Speed Pressure Transmitter
• Fire relay RETURN
BOTTOM
SUPPLY
2. For base model only. Factory options will vary
3. Performance excludes ikW of evaporator fan
motor
nominal conditions
5. F.L.A - Full Load Amps are based on the overload settings
[max current] of all compressor and fan motor(s)
MEPS
8 9
Compact roof top package unit 028 to 048kW
10 11
Split ducted unit 012 to 045kW
Low profile
Features Handing options Technical data
• Low profile space saving design suitable for INDOOR Indoor Unit S012ILR1SA S015ILR1SA S018ILR1SA S020ILR1SA S023ILR1SA S024ILR3SA S030ILR3SA S035ILR3SA S040ILR3SA S045ILR3SA
Model Number
in-ceiling installation FRONT SUPPLY / REAR RETURN (Reverse Cycle) Outdoor Unit S012OVR3SA S015OVR3SA S018OVR3SA S020OVR3SA S023OVR3SA S024OVR3SA S030OVR3SA S035OVR3SA S040OVR3SA S045OVR3SA
• EC direct drive blower (012-023) Total Capacity (kW)3 12.57 15.54 17.43 20.53 22.89 25.15 31.02 34.13 39.78 45.27
• EC plug fans 024-045 with high static capability REAR
RETURN Rated Cooling Sensible3 9.7 12.13 13.45 15.88 18.17 19.39 25.97 28.12 33.42 36.62
up to 500pa TOP SUPPLY
EER (kW/ikW)3 3.50 3.70 3.49 3.60 3.32 3.59 3.60 3.44 3.40 3.27
• Hybrid axial fan (012-045kW)
Total Capacity (kW) 11.90 14.70 16.70 20.60 22.50 23.80 30.20 33.60 40.10 43.50
• TXV refrigerant control Rear Front Rated Heating1.
• Coil anti-corrosion protection COP 3.66 3.87 3.71 3.81 3.63 3.66 3.60 3.78 3.61 3.71
• Open controls MEPS Certified Yes
• 25mm PE closed cell insulation Maximum OC +50
Operating Range
• MEPS certified Minimum OC -10
Capacity Steps % 0/100 0/50/100
Type Scroll
Factory options TOP SUPPLY / REAR RETURN Compressor Starter D.O.L (Optional Soft Starter)
customised to order REAR
Qty 1 2
Type Hybrid Axial
Outdoor
RETURN
12 13
Split ducted unit 024 to 095kW
Horizontal
Features Handing options Technical data
• Field configurable supply air outlet INDOOR Indoor Unit S024IHR3SA S030IHR3SA S035IHR3SA S040IHR3SA S045IHR3SA S055IHR3SA S065IHR3SA S075IHR3SA S085IHR3SA S095IHR3SA
Model Number
• EC plug fans with high static capability FRONT SUPPLY / REAR RETURN (Reverse Cycle) Outdoor Unit S024OVR3SA S030OVR3SA S035OVR3SA S040OVR3SA S045OVR3SA S055OVR3SA S065OVR3SA S075OVR3SA S085OVR3SA S095OVR3SA
up to 500pa (STANDARD)
Total Capacity (kW)3 25.14 31.02 34.13 39.78 45.27 52.90 63.88 72.95 83.74 94.04
• Hybrid axial fan (012-045kW) Rear
Rated Cooling Sensible3 19.38 25.97 28.12 33.42 36.62 44.01 54.5 58.5 69.34 77.49
• EC hybrid axial fan (055-095kW)
EER (kW/ikW) 3
3.59 3.60 3.44 3.40 3.27 3.07 3.28 3.49 3.47 3.24
• TXV refrigerant control REAR
RETURN
• Coil anti-corrosion protection Total Capacity (kW) 23.80 30.20 33.60 40.10 43.50 54.30 65.00 73.40 84.30 96.10
Front Rated Heating1.
• Open controls COP 3.66 3.60 3.78 3.61 3.71 3.39 3.61 3.59 3.60
• 25mm PE closed cell insulation MEPS Certified Yes BCA Compliant
• MEPS certified Maximum OC +50
Operating Range
• BCA compliant Minimum OC -10
FRONT Capacity Steps % 0/50/100
SUPPLY
Type Scroll
Factory options Compressor Starter
Qty
D.O.L (Optional Soft Starter)
2
customised to order TOP SUPPLY / REAR RETURN Type Hybrid Axial EC Hybrid Axial
(FIELD CONFIGURABLE) Outdoor Fan Speed Control Variable Speed Pressure Transmitter
Outdoor Qty 2
• Compressor soft starter Rear
TOP SUPPLY
Type R410A
• High static pressure outdoor fans
• Phase fail protection relay REAR Refrigerant System Charge Per Circuit kg 3.95 5.30 5.70 7.30 6.80 5.75 6.75 9.50 11.00 10.80
RETURN
• Copper/copper coil(s) Front
No of Circuits 2
• Capacity modulation control (stage 1) Type EC Plug
• Outdoor coil(s) with anti-corrosion post-treatment Indoor Fan Speed Control Potentiometer
• Outdoor coil guards, powder coated Qty 1 2
• Discharge & suction isolation valves
Nominal 1250 1670 1750 1985 2235 2880 3550 3750 4400 4930
• Cable markers
Airflow Indoor (L/s) Maximum 1563 2088 2188 2481 2794 3600 4438 4688 5500 6163
Indoor Minimum 938 1253 1313 1489 1676 2160 2663 2813 3300 3698
• Double layered insulation to indoor section
OUTDOOR Available External Static Pressure Pa High Static Capability (See Fan Performance Curves)
• Copper/copper coil(s)
IP Rating IP54
• Liquid line isolation valves across filter drier
• Cable markers Power Supply (Volt/Phase/Hz) 400-415V / 3Ph + N / 50Hz
Rated Load Amps4 Outdoor/Indoor/Total 12.9/ 1/13.6 14.8/ 1.2/ 15.9 18/1.3/19.4 19.4/ 1.3/ 20.7 21.1/1.7/23 28.6/2.5/31.1 32.7/2.2/34.9 35.3/2.8/38.1 40.2/3.3/43.5 52.2/4.1/56.3
Full Load Amps5 Outdoor/Indoor/Total 19.6/4.2/23.8 24.2/4.2/28.4 27.2/4.2/31.4 35.2/4.6/39.8 35.2/4.6/39.8 45.2/4.6/49.8 47/8.4/55.4 53/8.4/61.4 65/8.6/73.6 71/8.6/79.6
Factory options Height 1190 1390 1595 1800
engineered to order Outdoor Dimensions (mm) Width 1850 2200
Length 1425
Outdoor Height 1195 1400 1605 1805
• 316 stainless steel cabinet, unpainted
Indoor Dimensions (mm) Width 1600 1850
• 304 stainless steel cabinet, powder coated
• Stainless steel external fixings Length 1100
• Coil(s) copper / copper Indoor and Outdoor Liquid mm (inch) 9.5 (3/8") x 2 9.5 (3/8") x 2 12.7 (1/2") x 2 15.9 (5/8") x 2
• Power supply – no neutral (415/3/50) Pipe Connection Diameter Gas mm (inch) 19.1 (3/4") x 2 22.2 (7/8") x 2 28.6 (1-1/8") x 2 28.6 (1-1/8") x 2
• Ductable air off in lieu of standard axial Nominal Weight 2. Outdoor kg 362 382 389 414 510 600 610 761 783
Indoor Nominal Weight 2. Indoor kg 201 204 233 290 340 461
• Stainless steel external fixings Rated Sound Power db(A) 66.5 66.3 70.9 71.5
• Coil(s) copper / copper
• Power supply – no neutral (415/3/50) 1. For reverse cycle model only 4. R.L.A - Run Load Amps are based on current drawn at
• R22/R407C application 2. For base model only. Factory options will vary
3. Performance excludes ikW of evaporator fan
motor
nominal conditions
5. F.L.A - Full Load Amps are based on the overload settings
[max current] of all Compressor and fan motor(s)
MEPS
14 15
Vertical package unit 012 to 045kW
Factory options Nominal 625 835 875 990 1120 1250 1670 1750 1985 2235
Airflow Indoor (L/s) Maximum 781 1044 1094 1238 1400 1563 2088 2188 2481 2794
engineered to order Fr t
Fron Minimum 469 626 656 743 840 938 1253 1313 1489 1676
• 316 stainless steel cabinet, unpainted
Available External Static Pressure Pa High Static Capability (See Performance Curves)
• 304 stainless steel cabinet, powder coated SIDE
• Stainless steel external fixings LEFT IP Rating IP54
RETURN
• Outdoor coil(s) copper / copper Power Supply (Volt/Phase/Hz) 400-415V / 3Ph + N / 50Hz
• Indoor coil(s) copper / copper Rated Load Amps 4
Total 5.60 6.88 8.50 9.72 12.40 13.90 16.10 19.80 21.20 23.50
TOP RIGHT SUPPLY / SIDE RIGHT RETURN
• Power supply – no neutral (415/3/50)
Full Load Amps 5
Total 12.40 14.70 16.20 20.20 23.80 28.40 31.40 40.50
• Ductable air off in lieu of standard axial Rear
TOP RIGHT Height 1579 1965 2140
SUPPLY
LY
Dimensions (mm) Width 1375 1370 2250
Length 850 950
Front
Fr
Nominal Weight 2.
kg 250 270 300 570 580 590 610 620
Rated Sound Power db(A) 63.5 66.9 66.5 68.7
1. For reverse cycle model only 4. R.L.A - Run Load Amps are based on current drawn at
SIDE
RIGHT
RETURN
2. For base model only. Factory options will vary
3. Performance excludes ikW of evaporator fan
motor
nominal conditions
5. F.L.A - Full Load Amps are based on the overload settings
[max current] of all compressor and fan motor(s)
MEPS
16 17
Split ducted unit 012 to 045kW
Vertical
Features Technical data
INDOOR
• Floor mounted vertical design with Model Number Indoor Unit S012IVR3SA S015IVR3SA S018IVR3SA S020IVR3SA S023IVR3SA S024IVR3SA S030IVR3SA S035IVR3SA S040IVR3SA S045IVR3SA
space saving footprint (Reverse Cycle) Outdoor Unit S012OVR3SA S015OVR3SA S018OVR3SA S020OVR3SA S023OVR3SA S024OVR3SA S030OVR3SA S035OVR3SA S040OVR3SA S045OVR3SA
• EC plug fans with high static
Total Capacity (kW)3 12.30 15.50 17.50 20.00 22.80 25.15 31.02 34.13 39.78 45.27
capability up to 500pa
Rated Cooling Sensible3 9.42 12.50 13.50 15.30 17.50 19.39 25.97 28.12 32.42 36.62
• Hybrid axial fan (012-045kW)
• TXV refrigerant control EER (kW/ikW) 3
3.52 3.60 3.43 3.39 3.28 3.59 3.60 3.44 3.40 3.27
• Coil anti-corrosion protection Total Capacity (kW) 11.90 14.70 16.70 20.60 22.50 23.80 30.20 33.60 40.10 43.50
Rated Heating1.
• Open controls COP 3.66 3.87 3.71 3.81 3.63 3.66 3.60 3.78 3.61 3.71
• 25mm PE closed cell insulation MEPS Certified Yes
• MEPS certified Maximum OC +50
Operating Range
Minimum OC -10
Capacity Steps % 0/100 0/50/100
Factory options Type Scroll
customised to order Compressor Starter
Qty 1
D.O.L (Optional Soft Starter)
2
Outdoor Type Hybrid Axial
Outdoor Fan Speed Control Variable Speed
• Compressor soft starter
Qty 2
• High static pressure outdoor fans
• Phase fail protection relay Type R410A
• Copper/copper coil(s) Refrigerant System Charge Per Circuit kg 3.95 5.3 5.7 7.3 6.8 3.95 5.30 5.70 7.30 6.80
• Capacity modulation control (stage 1) No of Circuits 1 2
• Outdoor coil(s) with anti-corrosion post-treatment Type EC Plug
• Outdoor coil guards, powder coated. Indoor Fan Speed Control Potentiometer
• Discharge & suction isolation valves OUTDOOR Qty 1 2
• Cable markers Nominal 625 835 875 990 1120 1250 1670 1750 1985 2235
Indoor Airflow Indoor (L/s) Maximum 781 1044 1094 1238 1400 1563 2088 2188 2481 2794
• Double layered insulation to indoor section Minimum 469 626 656 743 840 938 1253 1313 1489 1676
• Copper/copper coil(s) Available External Static Pressure Pa High Static Capability (See Performance Curves)
• Liquid line isolation valves across filter drier IP Rating IP54
• Cable markers
Power Supply (Volt/Phase/Hz) 400-415V / 3Ph + N / 50Hz
Rated Load Amps4 Outdoor/Indoor/Total 6.5/0.5/7.0 7.5/0.9/8.4 9.1/0.9/10.0 9.4/1.0/10.4 10.3/1.3/11.6 12.8/ 1.1/13.6 14.7/ 1.4/ 15.9 18/1.8/19.2 19.2/ 2/ 20.6 20.9/2.6/22.6
Factory options Full Load Amps5 Outdoor/Indoor/Total 9.7/2.6/12.3 12/2.6/14.6 13.5/2.6/16.1 17.4/2.6/20.0 17.4/2.6/16.1 19.6/4.2/23.8 24.2/4.2/28.4 27.2/4.2/31.4 35.2/5.3/40.5 35.2/5.3/40.5
Height 1162 1190
engineered to order Outdoor Dimensions (mm) Width 730 1850
Outdoor Length 1550 1425
• 316 stainless steel cabinet, unpainted Height 1580 1810 2140
• 304 stainless steel cabinet, powder coated Indoor Dimensions (mm) Width 850 850 925
• Stainless steel external fixings
Length 625 625 950
• Coil(s) copper / copper
Indoor and Outdoor Liquid mm (inch) 9.5 (3/8") x 1 9.5 (3/8") x 1 9.5 (3/8") x 2 9.5 (3/8") x 2
• Power supply – no neutral (415/3/50)
Pipe Connection Diameter Gas mm (inch) 19.1 (3/4") x 1 22.2 (7/8") x 1 19.1 (3/4") x 2 22.2 (7/8") x 2
• Ductable air off in lieu of standard axial
Nominal Weight 2. Outdoor kg 211 214 217 220 223 362 382 389 414
Indoor
Nominal Weight 2.
Indoor kg 127 131 147 192 200 225
• Stainless steel external fixings
• Coil(s) copper / copper. Rated Sound Power db(A) 61.7 66.6 66.5 68.7
• Power supply – no neutral (415/3/50)
• R22/R407C application 1. For reverse cycle model only 4. R.L.A - Run Load Amps are based on current drawn at
2. For base model only. Factory options will vary
3. Performance excludes ikW of evaporator fan
motor
nominal conditions
5. F.L.A - Full Load Amps are based on the overload settings
[max current] of all compressor and fan motor(s)
MEPS
18 19
A perfect upgrade that fits
perfectly into the apac footprint
Our commercial and industrial range of products from 12 to 95kW capacity are a near perfect fit for most
replacement units in capacity, footprint, ductwork, controls and power supply connections.
www.apacair.com.au www.rinnai.com.au