Professional Documents
Culture Documents
Operator Controls: Operation and Maintenance Manual
Operator Controls: Operation and Maintenance Manual
Operator Controls: Operation and Maintenance Manual
Shutdown SIS
Previous Screen
i02370492
Operator Controls
SMCS - 7300; 7301; 7451
Note: Your machine may not be equipped with all of the controls that are described in this topic.
Operator Controls
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2/2/2006
Media Search - SEBU7764 - D10T Track-Type Tractor Page 2 of 17
Illustration 1 g01182835
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2/2/2006
Media Search - SEBU7764 - D10T Track-Type Tractor Page 3 of 17
(22) Halogen lights on the ROPS or HID lights on the ROPS and the cylinders
(29) Horn
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2/2/2006
Media Search - SEBU7764 - D10T Track-Type Tractor Page 4 of 17
Illustration 2 g01055466
Overhead control panel
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2/2/2006
Media Search - SEBU7764 - D10T Track-Type Tractor Page 5 of 17
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2/2/2006
Media Search - SEBU7764 - D10T Track-Type Tractor Page 6 of 17
Reference Refer to System Operation, RENR8170, "Machice Monitoring System for D8T, D9T, and
D10T" for the procedure to set the blade's pitch positions.
Illustration 3 g01086432
Front view (normal direction)
The reversing fan control reverses the rotation of the cooling fan in order to purge the radiator of
debris buildup. The automatic purge cycle will only be active if the machine is moving in
REVERSE. A manual purge will trigger a purge cycle regardless of the machine in FORWARD.
Reversing the fan is disabled if the fan is in bypass mode or the engine is in elevated low idle
condition at start-up. This avoids overcooling during the purge cycle. The Advisor display module
shows a message that the reversing fan is unavailable, if necessary.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2/2/2006
Media Search - SEBU7764 - D10T Track-Type Tractor Page 7 of 17
Illustration 4 g01043331
(4) Left Up
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2/2/2006
Media Search - SEBU7764 - D10T Track-Type Tractor Page 8 of 17
(8) OK button
(10) Options
The CAT Advisor Graphical Display Module is located at the front of the right side operator console.
The "Advisor" Display Module interfaces with the Monitoring System and the displays on the
instrument cluster. This allows additional means for the operator to increase machine efficiency.
Items (1), (2), and (3) across the top portion of the screen contain vital information display system's
data at all times.
Refer to Operation and Maintenance Manual, "Monitoring System" for additional information on the
"Advisor" Panel.
Note: The auxiliary circuit also serves as the switch for the rotating beacon. This circuit is provided
for machines that are delivered to Europe.
Turn the start switch key to the OFF position in order to stop the engine.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2/2/2006
Media Search - SEBU7764 - D10T Track-Type Tractor Page 9 of 17
"Transmission Autoshift -
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2/2/2006
Media Search - SEBU7764 - D10T Track-Type Tractor Page 10 of 17
Push this switch once for the bidirectional shift function (autoshift). The current mode of operation is
shown by the autoshift indicator. For the best results, change the options with the transmission in
NEUTRAL.
Refer to Operation and Maintenance Manual, "Transmission Control" for more information.
Refer to Operation and Maintenance Manual, "Transmission Control" for more information.
Reference Refer to System Operation, RENR8170, "Machice Monitoring System for D8T, D9T, and
D10T" for the procedure to set the auto carry.
HOLD - Move the switch to the center position in order to stop the ripper shank pin movement.
DISENGAGED - Press the bottom of the switch in order to disengage the ripper shank pin. Move
the switch to the HOLD position in order to stop the ripper shank pin movement.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2/2/2006
Media Search - SEBU7764 - D10T Track-Type Tractor Page 11 of 17
Note: The switch can be in the top position or the middle position during shutdown. The fender
floodlights will remain on for a short period of time when the switch is left in one of these two
positions.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2/2/2006
Media Search - SEBU7764 - D10T Track-Type Tractor Page 12 of 17
12 Volt Power Source - This receptacle can be used to power automotive electrical equipment or
accessories. Twelve volt power is only available when the engine start switch is in the ON position.
Horn (29)
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2/2/2006
Media Search - SEBU7764 - D10T Track-Type Tractor Page 13 of 17
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2/2/2006
Media Search - SEBU7764 - D10T Track-Type Tractor Page 14 of 17
Turn the temperature variable controls to a comfortable stage. Turn the blower fan switch to LOW,
MEDIUM LOW, MEDIUM HIGH, or HIGH speed. Use the fan speed that is needed to keep out the
dust.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2/2/2006
Media Search - SEBU7764 - D10T Track-Type Tractor Page 15 of 17
Additional Controls
Cab Door
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2/2/2006
Media Search - SEBU7764 - D10T Track-Type Tractor Page 16 of 17
Illustration 5 g01043602
Front view
Machines with cabs are equipped with alternate exits. If a door becomes disabled, the other door can
be used as an alternate exit. Release the latch and open the door.
Pull the inside top lever in order to release the cab door from the fully open position.
Window
Illustration 6 g01043621
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2/2/2006
Media Search - SEBU7764 - D10T Track-Type Tractor Page 17 of 17
Squeeze latch (1) in order to release the window from the CLOSED position. Pull latch (2) in order
to slide the window.
Copyright 1993 - 2006 Caterpillar Inc. Thu Feb 2 20:56:56 UTC+0700 2006
All Rights Reserved.
Private Network For SIS Licensees.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2/2/2006