Professional Documents
Culture Documents
ECU List - 5.9.1 - New Features
ECU List - 5.9.1 - New Features
ECU List - 5.9.1 - New Features
9 Page 1 of 5
ECU list-5.9.idc
ECU list-5.9.igc
ECU list-5.9.iwe
ECU list-5.9.nca
ECU list-5.9.dnc
Version 5.9 can be imported into GenConfig / LiteEdit / DriveConfig as a standard firmware package. It
must be used with following versions of ComAp PC software:
GenConfig 2.6 or higher
DriveConfig 2.9 or higher
LiteEdit 4.6 or higher
NanoEdit 1.1 or higher
DriveEdit 1.1 or higher
ECUDiag 1.1 or higher
NT NT
InteliGen or InteliSys 2.6 or higher
InteliDrive DCU Industrial 2.9 or higher InteliDrive Marine 2.1 or higher
InteliDrive Mobile 1.6 or higher
InteliDrive Lite 1.7 or higher
NT
InteliLite 2.0 or higher
NT
InteliCompact 2.0 or higher
InteliDrive Nano 1.4
NT
InteliNano 1.4 or higher
Documentation
PDF files Description
Complete list of values and diagnostic codes
ComAp Electronic Engines Support transmitted to/from ECU together with
05-2013.pdf recommended configuration and wiring.
Related to the ECU list version 5.9.
ECU list V5.9 – New Features | ©ComAp – May 2014 | ECU list - 5.9 New Features.pdf
New Features of ECU list sw V5.9 Page 2 of 5
ECU list V5.9 – New Features | ©ComAp – May 2014 | ECU list - 5.9 New Features.pdf
New Features of ECU list sw V5.9 Page 3 of 5
- Additionally, "B" is used to identify the build number of the particular version
- Please always use all these numbers when you need to identify your software (e.g. when you
communicate with ComAp technical support)
- Note: There can still be only two numbers visible in older configuration tools
NT
InteliCompact ECU support
NT NT
Support of new InteliCompact firmware version 2.0 (InteliCompact from ver. 2.0 is configured by ESC
files using InteliLite ECU list)
ECU list V5.9 – New Features | ©ComAp – May 2014 | ECU list - 5.9 New Features.pdf
New Features of ECU list sw V5.9 Page 4 of 5
NT
Diagnostic codes reading is now available for InteliDrive Nano and InteliNano controllers family [209]
Deutz EMR2
o Fixed speed control for InteliDrive Nano controllers family [208]
Iveco NEF & Cursor
o Fixed speed control for InteliDrive Lite controllers family [197]
o US gallons are used instead of UK gallons as dimension for Total Fuel Used [222]
o Catalyst Tank Level and DEF Warning were added for InteliDrive Lite controllers family [221]
Cummins CM850
o Engine Coolant Pressure, Intercooler Temp, Fuel Temp, Engine Fuel Delivery Pressure, Engine
Crankcase Pressure, Inj. Timing Rail 1 Pressure were added [199]
o Fuel Temp, Oil Temp, Turbo Oil Temp, Intercooler Temp were added or modified [176]
o Governor Gain Adjustment command is now available for customer settings [168]
Cummins CM850/CM2150/CM2250
o Percent Load values was added [195]
John Deere
o Aftertreatment control was improved [205]
o Fuel Rail Pressure and Manifold Air Pressure were added [173]
Deutz EMR4
o Fixed Start Lock command [198]
Caterpillar ADEM & EMCP
o EMCP Panel event codes 4006 and 4007 as nuisance are now hidden [206]
o Fuel Temp, Intake Manifold Temp, Oil Filter Diff. Press, Left Exhaust Temp, Right Exhaust
Temp, Oil Temperature, Exhaust Gas Port Temp, Gas Supply Pressure, Air Inlet Pressure,
Throttle Position, Air Filter Differential Pressure were added or modified [202,203,217]
Caterpillar J1939
o Fuel Temp, Intake Manifold Temp, Oil Filter Diff.Press, Left Exhaust Temp, Right Exhaust Temp,
Oil Temperature were added or modified [202]
Scania S6 Singlespeed from ver. 1794335
o Proprietary speed control was added [228]
Volvo EMSI Allspeed
NT
o Fixed start/stop and speed command for InteliDrive Lite and InteliLite controller family
Tier4 icons support is available in InteliDrive Nano for: [204]
o John Deere
o Cummins CM2250
o Cummins CM850/CM2150/CM2250
o Deutz EMR4
o Scania S8 Singlespeed
o Scania S8 Allspeed
o Volvo EMSI Allspeed
Fault codes texts were standardized [163,122,143,212,210]
Percent Load at current speed is now a default value on 6 position of ECU values in InteliLite
th NT
ECU list V5.9 – New Features | ©ComAp – May 2014 | ECU list - 5.9 New Features.pdf
New Features of ECU list sw V5.9 Page 5 of 5
o Deutz EMR4
o John Deere
Exhaust temperature monitoring for 16 cylinders are added in:
o Cummins CM850
ECU list V5.9 – New Features | ©ComAp – May 2014 | ECU list - 5.9 New Features.pdf