Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

Version History

CDR2XP1X (SNCS Firmware): Program for SNCS communication PCB (PCB NO.90043)

CDR2XP1X: Ver.00-04 Program Upgrade Procedure


<Applicable to S/N> <Release Date>
XP-100 S/N: Not fixed yet May 1, 2014
XP-300 S/N: Not fixed yet

<Part No./Name>
AQ899866: OUTPUT INTERFACE_ASSY NO.8

Changed Specifications

1 As MAC addresses for LAN port expansion module (XPort04R) were running out, an alternate module
(XPort05R) is now supported.
(1) Firmware has been changed to support MAC addresses of both XPort04R and XPort05R.
Previously, only lower MAC addresses were referenced. However, the program has been changed
to reference upper addresses as well.

Resolved issues

None

Remarks

On the XP main unit, the following versions will be displayed:


- Main Ver.: Ver.2.02
- Kernel Ver.: Ver.1.00

ECR:314B016

XP Series S/M
XP Series > Service Manual > Version History 1/3 ページ

Version History
CDR2XP1X (SNCS Firmware): Program for SNCS communication PCB (PCB NO.90043)
CDR2XP1X: Ver.00-03 Program Upgrade Procedure

<Applicable to S/N> <Release Date>


XP-100 S/N: A4736 and thereafter June 24, 2013
XP-300 S/N: A4046 and thereafter
<Parts Information>
AQ899866: OUTPUT
INTERFACE_ASSY NO.8

Changed Specifications

1 As authentication methods for sending e-mails to SNCS, SMTP(LOGIN)


authentication and SMTP(PLAIN) authentication have been added in
addition to POP authentication.

SMTP(LOGIN) authentication and SMTP(PLAIN) authentication have

been added as authentication method setting values.

E-mails can now be sent via SMTP(LOGIN) authentication and

SMTP(PLAIN) authentication.

Resolved program issues

None

Remarks

The following version will be displayed in the XP main unit:


・Main Ver. : Ver.2.01
・Kernel Ver.: Ver.1.00

ECR:313C031
[Back to Top]

file://tsc-serv02/cs-tech2/COMMON/TS_English/SM/Web_Manual/XP-300/SM_Cntnt/AppenD/CDR... 2013/10/03
XP Series > Service Manual > Version History 2/3 ページ

CDR2XP1X: Ver.00-02 Program Upgrade Procedure

<Applicable to S/N> <Release Date>


XP-100 S/N: A1574 and thereafter November 12, 2012
XP-300 S/N: A1777 and thereafter
<Parts Information>
AQ899866: OUTPUT
INTERFACE_ASSY NO.8

Changed Specifications

1 The number of characters which can be set for POP user name has been
increased.

The following domains have been expanded to allow up to 50 characters


to be set for POP user name.
1. The number of bytes used for "Authenticated user name" in "Mail
parameter setting command frame" has been changed from 16 bytes
to 52 bytes.
2. The number of bytes used for "Authenticated user name" in
"Parameter acquisition response frame" has been changed from 16
bytes to 52 bytes.
3. The number of bytes used for "User name" in "POP before SMTP
communication frame" has been changed from 15 bytes to 51 bytes.

Resolved program issues

None

Remarks
If using this program version, make sure to upgrade CARD1XP1X program
version to version 00-08.
The following version will be displayed in the XP main unit:
・Main Ver. : Ver.1.10
・Kernel Ver.: Ver.1.00

ECR:312I034
[Back to Top]

CDR2XP1X: Ver.00-01

file://tsc-serv02/cs-tech2/COMMON/TS_English/SM/Web_Manual/XP-300/SM_Cntnt/AppenD/CDR... 2013/10/03
XP Series > Service Manual > Version History 3/3 ページ

<Applicable to S/N> <Release Date>

<Parts Information>
AQ899866: OUTPUT
INTERFACE_ASSY NO.8

Changed Specifications

Resolved program issues

Remarks
This is the initial version in the field.
[Back to Top]

file://tsc-serv02/cs-tech2/COMMON/TS_English/SM/Web_Manual/XP-300/SM_Cntnt/AppenD/CDR... 2013/10/03

You might also like