Professional Documents
Culture Documents
Piling and Drilling Template: Design Project Highlights
Piling and Drilling Template: Design Project Highlights
TWD designed several piling machines in order to install multiple INSTALLATION OF OVER 500 PILES (PILING & DRILLING)
types of piles for the Hay Point jetty construction in Australia. OUTRIGGERS REUSED DURING PILING & DRILLING
The novel piling templates were fitted with grippers on both sides ONE NOVEL DESIGN FITS FOUR JACK UP BARGES
of the outrigger and could be installed on four different jack-up ON-SITE ASSISTANCE IN AUSTRALIA
in the optimal work range of the JUBs with minimal jacking loca-
vices were provided such that the challenging design project was
and money was saved and the installation of over 500 piles was
considered a success.
To be able to install the piles efficiently, the challenge was to equip the outrigger with grippers on both sides. The top and bottom grippers are
identical to increase the interchangeability between the templates and minimizes the required amount of spares. Both grippers were able to move
independently in the horizontal plane to install the piles under different rakes. To manipulate the grippers large hydraulic cylinders were installed.
A number of piles had to be placed in rocky seabed. To perform The outrigger was designed such that both the piling and drilling
this work the same outrigger was rebuild and equipped with an template could be fitted to it. A smart and modular structure al-
oscillator, casing and drill head. It was the first time that a oscilla- lowed installation on four different jack up barges and improved
tor was used from a jack up barge and perform the drilling work the working sequence. Next to this an integrity check was per-
in water depth of 20m. The first part of the socket was drilled into formed of the vessel and bull rail to ensure safe practices. All
the rock bed using the casing oscillator. For the second part, the structures were designed according to Australian standards.
drill head was inserted in the casing to complete the drill hole.
GET IN TOUCH