Professional Documents
Culture Documents
Low-Torque Basic Switch D2MC
Low-Torque Basic Switch D2MC
Low-Torque Basic Switch D2MC
RC
Ordering Information
Model Number Legend
D2MC-jjj
1 2 3
156
D2MC D2MC
Specifications
Ratings
Item Resistive load
Model Rated voltage
D2MC-5 125 VAC 5A
250 VAC 5A
D2MC-01 125 VAC 0.5 A
30 VDC 0.5 A
Note: The ratings values apply under the following test conditions:
Ambient temperature: 20±2°C
Ambient humidity: 65±5%
Operating frequency: 30 operations/min.
Characteristics
Item D2MC-5 D2MC-01
Operating speed 1° to 360°/sec
Operating frequency Mechanical: 240 operations/min max.
Electrical: 30 operations/min max.
Insulation resistance 100 MΩ min. (at 500 VDC)
Contact resistance 20 mΩ max. 100 mΩ max.
(initial value)
Dielectric strength 600 VAC, 50/60 Hz for 1 min between terminals of same polarity
1,500 VAC, 50/60 Hz for 1 min between current-carrying metal parts and ground, and between each
terminal and non-current-carrying metal part
Vibration resistance Malfunction: 10 to 55 Hz, 1.5-mm double amplitude
(see note 2)
Shock resistance Destruction: 1,000 m/s2 {100 G} max.
(see note 2) Malfunction: Models with OTq of 0.5 mN S m: 100 m/s2 {10 G} max.
Models with OTq of 0.75 mN S m: 100 m/s2 {10 G} max.
Models with OTq of 1.00 mN S m: 200 m/s2 {20 G} max.
Durability (see note 3) Mechanical: 10,000,000 operations min. Mechanical: 10,000,000 operations min.
(60 operations/min) (60 operations/min)
Electrical: 100,000 operations min. Electrical: 100,000 operations min.
(30 operations/min) (30 operations/min, 125 VAC,
30 VDC 0.1 A)
Degree of protection IEC IP40
Degree of protection Class I
against electric shock
Proof tracking index (PTI) 175
Ambient operating –25°C to 80°C (at ambient humidity of 60% max.) (with no icing)
temperature
Ambient operating 35% to 85% max. (for 5°C to 35°C)
humidity
Weight Approx. 10 g
Note: 1. The data given above are initial values.
2. Malfunction: 1 ms max.
3. For testing conditions, contact your OMRON sales representative.
157
D2MC D2MC
Contact Specifications
Item D2MC-5 D2MC-01
Contact Specification Rivet Crossbar
Material Silver alloy Gold alloy
Gap (standard value) 0.5 mm
Inrush NC 15 A max. 0.5 A max.
currentt NO 7 A max. 0.5 A max.
Minimum applicable load 160 mA at 1 mA at
(see note) 5 VDC 5 VDC
158
D2MC D2MC
Dimensions
Mounting Holes
Note: All units are in millimeters unless otherwise indicated.
Two, 3.1-dia. mounting holes or
M3 screw holes
8.7 ± 0.1
23.8 ± 0.1
4±0.1 dia.
RT min. 5° 5° 5°
t=0.8 TT min. 38°
Quick-connect terminals (#205)
FP 15±3° (see note 3)
159
D2MC D2MC
1.6
Center of l
rotating axis
Precautions
Refer to pages 26 to 31 for common precautions.
Correct Use
Mounting/Soldering
Use M3 mounting screws with plane washers or spring washers to
mount the switch. Tighten the screws to a torque of 0.20 to
0.29 N S m {2 to 3 kgf S cm}.
Do not change the operating position by modifying the actuator.
Using Micro Loads
For details, refer to General Information.
160