Professional Documents
Culture Documents
Sample Compliance Shhet
Sample Compliance Shhet
01-3P Fill and backfill with selected material obtained from outside
sources including compaction. Cu. M 959
Job 1
01-11P Fill and backfill with selected material obtained from outside
110
sources including compaction. Cu. M
01-19P Fill and backfill with selected material obtained from outside
sources including compaction. Cu. M 483
a) 250 mm No. 3
Cu.M 3
01-P : 4 of 13
01-30P Fill and backfill with selected material obtained from outside
sources including compaction. Cu. M 407
BILL OF QUANTITIES
Code-02 UGWT & PUMP ROOM
Item Description Unit Qty. Unit Total
No. Rate Amount
(Rupees) (Rupees)
(1) (2) (3) (4) (5) (6)
P. PLUMBING WORKS
Q = 1000 USGPM
H = 9.0 bars
Q = 50 USGPM
H = 10.0 bars Set 1
Flow = 50 US GPM
Head = 1.0 bar No. 1
02-6P Providing and installing Mild Steel ladder rungs (20mm dia) as
specified and shown on the drawing (epoxy coated) and as
specified and/or as directed by the Engineer.
No. 45
02-7P Providing and installing Cast iron cover & frame conforming to
BS EN 124 of following sizes and duty as shown on the drawing
and as specified and/or as directed by the Engineer.
02-8P Providing and installing Cast iron grating with frame of following
sizes and duty as shown on the drawing and as specified and/or
as directed by the Engineer.
BILL OF QUANTITIES
Code-03 IRRIGATION WATER TANK
Item Description Unit Qty. Unit Total
No. Rate Amount
(Rupees) (Rupees)
(1) (2) (3) (4) (5) (6)
P. PLUMBING WORKS
Flow = 50 US GPM
Head = 9.0 meters No. 1
03-4P Providing and installing Cast iron gate valve (PN-10) of following
diameter as shown on drawings, specification and/or as directed by
the Engineer.
a) 100mm No. 1
03-5P Providing and installing Galvanized mild steel U turned vent pipes
(BS 1387/EN 10255, medium quality) with wire mash of following
dia as shown on drawings, specification and/or as directed by the
Engineer.
a) 75mm No. 2
03-6P Providing and installing Cast iron cover & frame conforming to BS
EN 124 of following sizes and duty as shown on drawings,
specification and/or as directed by the Engineer.
03-7P Providing and installing Mild Steel ladder rungs (20mm dia) as
specified and shown on the drawing (epoxy coated) as shown on
drawings, specification and/or as directed by the Engineer. No. 10