Universiti Tun Hussein Onn Malaysia: Confidential

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

CONFIDENTIAL

UNIVERSITI TUN HUSSEIN ONN MALAYSIA

TEST 1
(ONLINE)
SEMESTER II
SESSION 2020/2021

COURSE NAME : REINFORCED CONCRETE DESIGN

COURSE CODE : BFC34803

PROGRAMME CODE : BFF

EXAMINATION DATE : APRIL 2021

DURATION : 1 HOUR 30 MINUTES

INSTRUCTION : 1. OPEN BOOK EXAMINATION


2. ANSWER ALL QUESTIONS
3. DESIGN SHOULD BE BASED ON
BS EN 1990:2002+A1:2005, BS EN
1991-1-1:2002, BS EN 1992-1-1:2004

THIS QUESTION PAPER CONSISTS OF FOUR (4) PAGES

CONFIDENTIAL
CONFIDENTIAL BFC34803

Q1 Figure Q1 shows a single storey ground floor plan of a single storey reinforced concrete
residential house. For design and construction purposes, all slabs and the beam are casting
integrally. All slabs subjected to a characteristic permanent actions of 1.3 kN/m2 (excluding
self-weight). The slab panel has to be designed for a maximum characteristic variable action
referring to BS EN 1991-1-1:2002. Based on the information provide;

Characteristic strength of concrete, fck = 30 MPa


Characteristic strength of steel reinforcement, fyk = 500 MPa
Unit weight of reinforced concrete = 25 kN/m3
All slab thickness = 100 mm
Concrete cover = 35 mm
Bar reinforcement = 8 mm

(a) Sketch the structural plan layout for the ground floor.
(3 marks)

(b) Determine the ultimate bending moment for slab panel at Bedroom 1.
(6 marks)

(c) Design all reinforcements at mid span of slab panel at Bedroom 1.


(8 marks)

(d) During construction, the house owner asked to replace all slab panels to non-suspended.
With aid of sketches, briefly discuss the consequence of the replacement on its design
and construction.
(3 marks)

Q2 Figure Q2 shows the cross section of a reinforced concrete staircase for the hospital building.
The staircase has to be designed with maximum characteristic of variable action referring to
BS EN 1991-1-1:2002, while finishes and handrails is 1.2 kN/m2. All beam sizes are 250 mm
wide and 500 mm deep.

(a) Propose the most suitable dimension of going as required in BS 5395 comfortness
guideline for this staircase.
(2 marks)
(b) Analyse the actions of this staircase, draw the bending moment and shear force diagrams
with the important values.
(8 marks)

 END OF QUESTIONS 

2 CONFIDENTIAL
CONFIDENTIAL BFC34803

TEST 1

SEMESTER/SESSION : SEM II / 2020/2021 PROGRAMME CODE : 3 BFF


COURSE NAME : REINFORCED CONCRETE DESIGN COURSE CODE : BFC34803

FIGURE Q1

3 CONFIDENTIAL
CONFIDENTIAL BFC34803

TEST 1

SEMESTER/SESSION : SEM II / 2020/2021 PROGRAMME CODE : 3 BFF


COURSE NAME : REINFORCED CONCRETE DESIGN COURSE CODE : BFC34803

180
150

2500 1100 2300

A B
All units are in mm

FIGURE Q2

4 CONFIDENTIAL

You might also like