Professional Documents
Culture Documents
1z0-133.exam.47q: Number: 1z0-133 Passing Score: 800 Time Limit: 120 Min
1z0-133.exam.47q: Number: 1z0-133 Passing Score: 800 Time Limit: 120 Min
1z0-133.exam.47q: Number: 1z0-133 Passing Score: 800 Time Limit: 120 Min
47q
Number: 1z0-133
Passing Score: 800
Time Limit: 120 min
https://www.gratisexam.com/
1z0-133
https://www.gratisexam.com/
Exam A
QUESTION 1
When creating a dynamic cluster, you have multiple options concerning how dynamic servers are distributed across machines in your domain. Identify three
supported configurations.
Explanation/Reference:
Explanation:
QUESTION 2
Which action should you take to automatically back up the domain configuration when anyone Activates a configuration change?
https://www.gratisexam.com/
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
References:
https://www.gratisexam.com/
QUESTION 3
As the technical lead for your project, you have been asked to recommend a new solution to handle frequently increasing loads on your applications. The Weblogic
12.1.2 domain currently runs with two clusters of three servers with request being filtered and passed by a proxy server that users the round –robin algorithm.
However, the load sometimes exceeds the maximum capacity of all these servers combined but your domain lacks in scalability.
What is the best implementation solution?
A. Add a third cluster and spread existing server instances across the clusters.
B. Modify the proxy server load balancing algorithm to weight based.
C. Configure dynamic clusters and specify the number of server instances you anticipate at needing at peak load.
D. Tune work managers to optimize work.
E. Replace the software load balancer with a hardware load balancer.
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
Explanation:
QUESTION 4
All administrators that deal with the production domain in your organization are extremely experienced. As the lead administrator, you have been asked to change
the administration console preferences for all administrators so that inline help no longer displays, since no one needs It.
Select the true statement about this scenario.
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
Explanation:
QUESTION 5
https://www.gratisexam.com/
You plan to Install WeblLogic Server by using the generic JAR installer in silent mode.
What are two ways to create the required response file?
Correct Answer: AB
Section: (none)
Explanation
Explanation/Reference:
Explanation:
QUESTION 6
Your domain consists of 30 servers. You are using the Administration Console.
Which is the quickest way to identify the servers that are in a Failed health state?
A. Use the Filter button from the domain’s Monitoring >Health tab.
B. Use the Monitoring >Health tab for each server in the domain.
C. Write a custom WLST script to print out failed server.
D. Capture a diagnostic snapshot.
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
References:
QUESTION 7
You use the Java –based Node Manager to start your managed servers. You want Node Manager to:
https://www.gratisexam.com/
Below are portions of the nodemanager.properties file. Select the one that configures Node manager as described.
A.
B.
C.
D.
https://www.gratisexam.com/
E.
Correct Answer: E
Section: (none)
Explanation
Explanation/Reference:
Explanation:
QUESTION 8
Which three statements are true about WebLogic clusters?
Explanation/Reference:
Explanation:
QUESTION 9
You are using WebLogic Server Diagnostic Framework (WLDF) Instrumentation in a system diagnostic module. The Dye Injection monitor is enabled. You know the
diagnostic context ID of the request you are Interested in that was processed by several. You are looking through the messages in the server log file of several.
https://www.gratisexam.com/
https://www.gratisexam.com/
A. You need to look at the Events Data Archive. Server log files do not contain WL DF context IDs
B. You need to look at the Harvested Data Archive. Server log files do not contain WL DF context IDs.
C. You need to look at the domain log file. Only the domain log file contains WL DF context IDs.
D. You can search the server log file for the context ID. Any message that was written to the log IDs during that request will contain the context ID.
E. You need to translate the context ID Into the corresponding transaction ID, which is the only ID in server log file entries.
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
Explanation:
QUESTION 10
You are deploying a web application called inventory, war. It has been installed and has the state of “prepared”. It is targeted to the Managed server named
managed1.The web application’ context root is /inventory and the starting page is index .jap.
However ,you want to test the application before allowing end users access to it. In the administration console, you select inventory. war, and then select Start and
“servicing only administration request.”
In you web browser, you need to enter a host and port followed by /inventory /index.jap.
Correct Answer: C
Section: (none)
Explanation
https://www.gratisexam.com/
Explanation/Reference:
Explanation:
QUESTION 11
You are creating and configuring a cluster by using the administration console. Which two statements are true?
A. All servers that will be part of the cluster must be created before the cluster is created.
B. You must pick the cluster messaging mode.
C. Even though you create a non dynamic cluster, you can change it to a dynamic cluster later.
D. Once the cluster is created, you cannot change its messaging mode.
E. The administration console does not provide a way to manually migrate singleton services. It must be set up to be done automatically or by using WLST.
Correct Answer: BC
Section: (none)
Explanation
Explanation/Reference:
Explanation:
QUESTION 12
One Managed Server that is part of a large domain throws java.lang.out of Memory error (OOM) occasionally.
You have been monitoring this server with the jvisualVM tool but that didn’t help because the issue occurs infrequently and not a specific scenario. So you decided
to force the server to dump the heap memory as soon as an OOM gets thrown in order to analyze the dump file later.
How do you modify the Java HotSpot Startup command to enable this feature and save the dump in the directory D:\hprof-dumps\?
A. Add –xx:+DumpHeaponoutofmemory-xx:Dumppath=D:\hprof.
B. Add-xx:+HeapDumponoutofmemoryError-xx:Heapdumppath=D:\hprof-dumps.
C. Add-xx:+DumpHeaponoutofmemoryError-xx:Heappath=D:\hprof-dump.
D. Add-xx:+HeapdumponoutofMemory-xx:HeapDumppath=D:\hprof-dumps.
E. Add-xx:+HeapDumponoutofMemoryError-xx:Dumppath=D\hprof-dumps.
F. Add-xx:+HeapDumponoutofMemoryExecepttion-xx:HeapDumppath=D:\hprof-dumps.
Correct Answer: B
Section: (none)
Explanation
https://www.gratisexam.com/
Explanation/Reference:
Explanation:
QUESTION 13
You are using the Administration console to monitor a resource.
Which three techniques can you use to customize the monitoring output?
Explanation/Reference:
Explanation:
QUESTION 14
Your server includes an application that users a generic JDBC data source to connect to a database. However, the network connection between the server and the
database is not 100% reliable.
Identify two data source attributes that, if set properly can help avoid situations in which the application fails due to a failed JDBC connection.
Correct Answer: CE
Section: (none)
Explanation
Explanation/Reference:
References:
https://www.gratisexam.com/
QUESTION 15
Which three tasks can be performed by the Node Manager?
A. Start a server
B. Define a new server
C. Host the Node Manager console.
D. Automatically restart a failed server.
E. Kill a failed application on a server.
F. Kill a server process that did not shut down property.
Explanation/Reference:
References:
QUESTION 16
You created a shutdown class Myclass that you would like to execute just before server shutdown.
Which statement is true regarding Myclass?
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
Explanation:
QUESTION 17
Consider an existing nondynamic cluster that is currently hosting many libraries, applications, and data sources. You need to scale out this cluster to include a new
server. You provision the domain on new machines.
What are the two ways to create this new server in the domain configuration?
https://www.gratisexam.com/
A. Use the Configuration Wizard to add a new server to the cluster.
B. Use pack and unpack to copy an existing server in the cluster.
C. Use the Administration Console to add a new network channel to the cluster.
D. Use the Administration Console to clone an existing server in the cluster.
Correct Answer: AD
Section: (none)
Explanation
Explanation/Reference:
Explanation:
QUESTION 18
You need to take a web application offline.
Which three options are supported In WebLogic Server when you stop a running application?
Explanation/Reference:
Explanation:
QUESTION 19
You use a web browser to log in to a application that is deployed to WebLogic server. When you click a link named “publish” on the site, an Access Denied”
message appears.
Which two statements are true about this server’s security configuration?
https://www.gratisexam.com/
B. A security realms is not configured in this domain.
C. Your user account has expired.
D. Your user account exists in an authentication provider.
E. A security policy is attached to the “publish” link URL.
Correct Answer: DE
Section: (none)
Explanation
Explanation/Reference:
Explanation:
QUESTION 20
As part of troubleshooting an application, you need to analyze the HTTP session count and the server heap size over the past six hours. You are using the
Administration console. You want to view both metrics together and correlate their values.
Explanation/Reference:
Explanation:
QUESTION 21
An application fails. The exception Indicates that the JDEM data source cannot be found.
Identify two possible steps that you can perform to verify the data source’s availability.
https://www.gratisexam.com/
D. Verify that the application and data source have the same target.
Correct Answer: CD
Section: (none)
Explanation
Explanation/Reference:
Explanation:
QUESTION 22
Consider a domain that includes a dynamic cluster of three servers. Your network administrator requires all servers to bind the specific domain name
mycompany.com.
https://www.gratisexam.com/
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
Explanation:
QUESTION 23
You see a script called start WebLogic.sh(.cmd in Windows) in the root folder of your domain.
A. Starts a machine
https://www.gratisexam.com/
B. Starts Node Manager
C. Starts a Managed server
D. Calls the startwebLogic.sh script in the domain’s bin directory
E. Calls the startManagedWebLogic.sh script in the domains bin directory
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
References:
QUESTION 24
A WebLogic Server instance can have multiple network channels defined for it.
Each channel for the server must have a unique combination of two elements. Identify these two elements.
A. Tunneling enabled
B. Listen address
C. Listen port
D. Outbound enabled
E. Channel weight
Correct Answer: BC
Section: (none)
Explanation
Explanation/Reference:
References:
QUESTION 25
Identify two reasons for defining machines and assigning servers to them in WebLogic servers.
https://www.gratisexam.com/
Correct Answer: BE
Section: (none)
Explanation
Explanation/Reference:
Explanation:
QUESTION 26
You want to configure WebLogic server transactions to be recoverable when a nonclustered managed server crashes, even if that crash is caused by an
unrecoverable hardware failure. You want to run the managed server on different hardware, and have it recover the transactions that were in-progress at the time of
the crash.
You also want to use the default store for transaction logs.
Which statement is true?
A. This scenario is not possible .You must use the JDBC store to recover transactions from a crashed server.
B. This scenario is not possible. You must use clustered managed servers to recover transactions from a crashed server.
C. This scenario is common , and so the default configuration of the default store works.
D. Before the crash ,you need to update the path to the default store for the managed server. The path should be to some shared storage location.
E. After the crash, obtain a copy of the managed server’s default store from the administration server. Move it to the same relative location on the new hardware
before starting the managed server there.
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
Explanation:
QUESTION 27
To support a growing application workload, you need to scale out an existing (nondynamic) cluster. You power up the new hardware and install WebLogic server.
Which two changes are mandatory for you to make to your domain configuration?
https://www.gratisexam.com/
F. Add the cluster to the machine.
Correct Answer: BC
Section: (none)
Explanation
Explanation/Reference:
Explanation:
QUESTION 28
Select the two true statements about upgrading WebLogic server to version 12c (12.12).
A. To use the Reconfiguration Wizard, your current WebLogic server version must be 9.0 or higher.
B. The Domain Upgrade Wizard is no longer available in 12.1.2.
C. After running the wizard to update your domain ,you must reapply your start script customizations.
D. You need to update the domain’s administration server files.
Correct Answer: BC
Section: (none)
Explanation
Explanation/Reference:
Explanation:
QUESTION 29
A WebLogic server (WLS) domain was recently updated from WLS 10.3.6 to WLS 12.12.
What is the mode of operation of the Node Manager after the update and what is needed to keep the same behavior as in WLS 10.3.6?
A. Nothing, Node Manager runs and behaves the same on both WLS versions
B. Node Manager runs in “per machine” mode and nothing is needed to keep the same behavior.
C. Node manager runs in “per domain” mode and requires manual steps to return to the “per machine” mode, used in WLS10.3.6.
D. Node Manager mode of operating and behavior can be selected in reconfiguration Wizard.
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
https://www.gratisexam.com/
Explanation:
QUESTION 30
Which three statements about patching Web Logic server (WLS) by using Opatch are true?
A. Each patch comes with a “read me” file containing installation instructions.
B. You can use Opatch to see which patches are currently applied to WebLogic server.
C. Opatch is a GUI tool and requires the operating system to have a window manager.
D. Opatch requires a JDK to run.
E. After installing WLS, you download the Opath utility from Oracle support.
F. Each patch ZIP file comes with the Opatch utility.
Explanation/Reference:
Explanation:
QUESTION 31
You are carrying out the RDBMS Security Store configuration using the configuration Wizard
Which three actions can you perform with the Configuration Wizard during the process?
Explanation/Reference:
Explanation:
QUESTION 32
GridLink data sources are designed for use with an Oracle RAC database. By using the Fast Connection Failover (FCF) pattern, GridLink data sources can quickly
react when a RAC node goes down.
https://www.gratisexam.com/
Which two statements are true?
A. The Oracle Notification service is used to notify the data source of changes to RAC nodes.
B. The reaction is quick, because in using FCF all network timeouts are set very low.
C. FCF is faster because it polls and tests connection, freeing the data source from these tasks.
D. FCF requires the use and configuration of a database server in the GridLink data source.
E. You can use any Oracle Thin database driver with a GridLink data source.
Correct Answer: AD
Section: (none)
Explanation
Explanation/Reference:
Explanation:
QUESTION 33
You use the administration console to start a managed server. Select the three statements that must be true.
Explanation/Reference:
References:
QUESTION 34
Which two statements are true about WebLogic data sources?
https://www.gratisexam.com/
C. Data sources are based on the JMS specification.
D. A data source contains a connection pool.
E. A domain requires at least one data source.
Correct Answer: BD
Section: (none)
Explanation
Explanation/Reference:
Explanation:
QUESTION 35
You need to monitor the HTTP session count for a running web application.
Explanation/Reference:
Explanation:
QUESTION 36
You want to start the managed server called managed1 in “Standby” mode, to keep it as a “hot backup”. Which statement about your domain configuration must be
true?
Correct Answer: B
https://www.gratisexam.com/
Section: (none)
Explanation
Explanation/Reference:
Explanation:
QUESTION 37
You require high availability for HTTP sessions in a web application. In addition, you have the following constraints:
• There is little free memory on the machines hosting the cluster.
• HA must be guaranteed even when multiple machines fall simultaneously.
• You are not allowed to update the production databases schema.
A. Database persistence
B. File persistence
C. In-memory replication
D. Whole –server migration
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
Explanation:
QUESTION 38
You are responsible for configure a WebLogic domain to support an order processing application. This application will communicate with multiple JDBBC data
sources to fulfill each customer order. To maintain data integrity across these databases, work will be performed within a global transaction. However, you have
learned that one of the data sources in the transaction does not have an XA driver.
Which option should you select on this non-XA data source to ensure that orders are still processed as global transactions?
A. Ignore Heuristics
B. Pinned to Thread
C. One phase commit
D. Logging connections on Resource
E. Test connection on Reserve
https://www.gratisexam.com/
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
Explanation:
QUESTION 39
Which machines can be configured by using the configuration Wizard?
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
References:
QUESTION 40
In the certification matrix for your version of WebLogic Server , you find the row for your database and its version. In that row, in the “type of database use” column,
it says “application data access only”.
https://www.gratisexam.com/
https://www.gratisexam.com/
E. By an Enterprise JavaBean
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
Explanation:
QUESTION 41
Which three statements are true about the administration console?
Explanation/Reference:
Explanation:
QUESTION 42
View the following file excerpt, which configures HTTP session replication:
A. Weblogic –application.xm1
B. Weblogic-xm1
C. Session-xm1
D. Config-xm1
E. Web.xm1
https://www.gratisexam.com/
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
Explanation:
QUESTION 43
You set up two network channels for server –to-server communication. You want channel x to be used more than channel Y, so you give channel x a higher channel
Weight. You want to see if indeed channel X is used more.
You use the administration console and look at both channels under each one’s Monitoring tab. What scenario would best assure you that channel x has an overall
higher connection rate?
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
Explanation:
QUESTION 44
The Administration Server of a domain falls due to a hardware failure. The hardware is beyond repair.
Before the failure you prepared a “backup admin server”. You go through your planned recovery process and are successful. The Administration Server is now
running on different hardware. The managed servers of the domain automatically reconnect to the admin server.
A. Files of deployed applications are available to the backup admin server from the same relative location as they were to the original admin server.
B. At the time of the failure ,the backup admin server was running in “Standby” mode on different hardware in the same network.
C. When the admin server failed, you must have shut down and restarted the managed servers, otherwise they could not have reconnected to the failed admin
server.
D. The backup admin server is any one of the running managed servers. You select one of the managed servers, stop it, set its “administration” flag, and restart it
https://www.gratisexam.com/
as the admin server of the domain.
E. The backup admin server must be running at the same DNS name or IP address as the original.
Correct Answer: BE
Section: (none)
Explanation
Explanation/Reference:
Explanation:
QUESTION 45
You use the Administration console to modify the domain’s security realm. After deleting the default authentication provider, you add a single authentication provider
for iplanet LDAP. You then try to reboot your servers with the weblogic user but they all fail to start due to authentication errors.
Correct Answer: AB
Section: (none)
Explanation
Explanation/Reference:
Explanation:
QUESTION 46
Which two statements are true about multicast communication within a cluster?
Correct Answer: AE
https://www.gratisexam.com/
Section: (none)
Explanation
Explanation/Reference:
Explanation:
QUESTION 47
You zipped up the domain’s config directory on the administration server’s machine before making some major configuration changes. You wait to activate after all
the changes have been saved. After your changes are in, hinges start failing badly. You want to go back to the old configuration.
A. Undo the changes you made manually by using the administration console or WLST.
B. 1. Stop the administration server. 2. Replace the config directory on the administration server’s machine with your backup. 3. Restart the administration server.4.
Stop the managed servers on each machine.5. Replace the config directory on the machine with your backup.6. Restart the managed servers on the machine.
C. 1. Stop the administration server.2. Extract only the config.xm1 file from the zip file.3. Overwrite config.xm1 on the administration server’s machine with this
extracted file.4. Restart the administration server.
D. 1. Stop the administration server.2. Replace the config directory on the administration server’s machine with your backup.3. Restart the administration server.
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
Explanation:
https://www.gratisexam.com/
https://www.gratisexam.com/