Professional Documents
Culture Documents
ALS Series: Microwave Radio
ALS Series: Microwave Radio
ALS Series: Microwave Radio
Series MICROWAVE
TO POINT
RADIO
PDH/SDH/Ethernet Series
DH/Ethernet
H/SDH Series
ALS
IP/PDH/SDH Series
IP/PDH/SDH Series
MICROVAVE
RADIO IP / PDH / SDH Series
MAIN FEATURES
> Base-Band high circuit integration
> Reduced power consumption
> Excellent radio performance
> 4 QAM to 1024 QAM modulations
> Layer 1/2/3/4 Header Compressor
TYPICAL APPLICATIONS
The ALS series has been conceived and designed to cover a
> 1 Gbits throughput per radio channel
wide range of applications, such as:
> XPIC configuration in single compact IDU
> Full software approach:
> 2G / 3G / LTE Cellular Network Infrastructure
• Modulation and radio capacity
> 10/100/1000 Mbit/s Ethernet connections
• ACM Adaptive Code & Modulation
> WiMAX backhauling
• Alarm/performance monitoring
> Private data Networks (WANs, LANs, etc.)
• Complete fault analysis
> Utility Networks (Railways, Pipelines, etc.)
• Availability of O&M Tools
> Back-up transmission medium to Fibre Optic links
(Loop activation, switch manual forcing, etc.)
> Spur Links for Backbones/Rings
> Interchangeable modules
> Last Mile Fibre Extension
> PWE3 for full IP transport
> Leased Lines Replacement
> Mixed TDM / Ethernet interfaces for dual native transport
> SDH Radio Ring Deployment up to 4xSTM-1
> Syncronous Ethernet support
> High Capacity Broadband Access Networks
> 1588 v2 support
> Easy configuration upgrade
> Integrated antennae up to 1.8 m
NODAL CONFIGURATION
In a nodal station the cross-connection functionality
can be distribuited over a configuration of up
to eight different IDUs and each one can manage
up to two different ODUs.
Connection among IDUs are ring protected.
Failing one IDU, no other IDU in the node is affected
by loss of traffic.
Thanks to the IDU scalable approach and user
friendly software management, it is possible to
build up a nodal configuration through incremental NODAL BUS SOLUTION
High speed protected nodal bus, the unique nodal
expansions (from one up to twelve or sixteen solution to build complex nodes up to 16 indipendent
different directions) with a reduce initial investiment. directions with a full pay-as you grow approach.
SDH Series IP/PDH/SDH Series
IP/PDH/SDH Series IP/PDH/SDH Series
IP/PDH/SDH Series IP/PDH/SDH Series
IP/PDH/SDH Series IP/PDH/SDH Series
IP/PDH/SDH Series MICROVAVE
IP/PDH/SDH Series
RADIO
OUTDOOR UNIT
> Light weatherproof (IP65) box
> Easy and quick deployment
> Full software programmability of main RF parameters
> Extended (Software) frequency agility
> Configuration, capacity and modulation independent
> Excellent shortand long term frequency stability
> Built-in ATPC functionality
> RF Loop
> 1024 QAM modulation
INDOOR UNIT
Several IDU models are available to fit any application:
IP PDH SDH Medium & High Capacity
IDU Model IP - PDH Solutions IP - SDH Solutions IP - PDH - SDH Solutions
AL / ALplus ALS ALplus2 / ALCplus2e
IDU 1RU (1 rack unit) - Compact Version ALC / ALCplus ALS-C ALCplus2 / ALCplus2e
Configuration 1+0 / 1+1 1+0 / 1+1 / 2x(1+0) 1+0 / 1+1 / 2x(1+0) / XPIC
TDM Transmission Capacity Up to 32xE1 1xSTM1 / 2xSTM1 / 63-126xE1 Up to 160xE1 per radio direction
Ethernet Throughput Capacity Up 100 Mbps - Up to 1 Gbps with XPIC (w/o Header Compression)
Modulation 4 to 32QAM 32 and 128QAM 4 to 256QAM with 8 ACM
Tributary Interfaces 16xE1 + 3xFE 2xSTM1 (16+2)xE1 + 2xSTM1
(32+2)xE1 + 2xSTM1
TDM Cross Connection capability
32xE1 + 3xFE 2xGE Electrical + 2xGE Optical/Electrical
Syncronous Ethernet Support
Maintenance Interfaces 2x10BaseT + USB + RS232 + G704 (E1) 2x10BaseT + USB + RS232 2x10BaseT + USB + G704 (E1)
IDU 1RU (1 rack unit) - Modular Version AL/ ALplus ALS ALplus2
Configuration 1+0 / 1+1 1+0 / 1+1 / 2x(1+0)/XPIC 1+0 / 1+1 / 2x(1+0)
TDM Transmission Capacity Up to 32xE1 1xSTM1 / 2xSTM1 / 4xSTM1 Up to 80xE1 (per radio channel)
Ethernet Troughtput Capacity Up 100 Mbps 155 / 310 / 620 Mbps Up to 400 Mbps (per radio channel)
Modulation 4 to 32QAM 32 and 128QAM 4 to 256QAM with 8 ACM
Tributary Interfaces 32xE1 2xSTM1 16xE1 + 2xSTM1
24xE1 + 4xFE 4xSTM1 TDM Cross Connection capability
8xE1 + 2xFE + 1xGE 1xGE Electrical/Optical +
1xGE Electrical + 1xGE Optical
Maintenance Interfaces 2x10BaseT + USB + RS232 + G704 (E1) 2x10BaseT + USB + RS232 2x10BaseT + USB + RS232 + G704 (E1)
ALS
IP/PDH/SDH Series
IP/PDH/SDH Series IP/PDH/SDH Series IP/PDH/SD
Frequency Band 4 GHz 6L/6U GHz 7/8 GHz 10/11 GHz 13 GHz 15 GHz 18 GHz 23 GHz 25 GHz 28 GHz 32 GHz 38 GHz 42 GHz
Frequency Range 4.4-5.0 5.9-7.1 7.11-8.5 10.2-11.7 12.75- 13.25 14.4-15.35 17.7-19.7 21.2-23.6 24.5-26.5 27.5-29.5 31.8-33.4 37-39.5 40.5-43.5
Modulations Schemes 4 QAM / 8 QAM / 16 QAM / 32 QAM / 64 QAM / 128 QAM / 256 QAM / 1024 QAM
Channel Spacing 3.5 MHz / 7 MHz / 14 MHz / 28 MHz / 40 MHz / 56 MHz
EthernetThroughput Up to 1 Gbps per radio channel
Supported Configurations Terminal applications 1+0 / 1+1 MHSB / 1+1 SD / 1+1 FD / 2+0 / 2x(1+1)
Nodal applications Up to 8x(1+1) or up to 16x(1+0)
Supported Capacities 2xE1 / 4xE1 / 5xE1 / 8xE1 / 10xE1 / 16xE1 / 21xE1 / 32xE1 / 42xE1 / 53xE1 / 1xSTM1 / 80xE1 / 160xE1 / 2xSTM1 / 4xSTM1
Output Power (dBm) at Point C’ **
AS ODU / ASN ODU
ALSseriesE.032.12 • Data subject to changewithoutnotice • All rights reserved © SIAE MICROELETTRONICA S.p.A.
4 QAM +28 +29 +29 +28 +28 +28 +23 +23 +22 +21 +20 +19 +17
8 QAM +28 +29 +29 +28 +28 +28 +23 +23 +22 +21 +20 +19 +17
16 QAM +25 +26 +26 +25 +25 +25 +21 +21 +20 +19 +18 +17 +15
32 QAM +25 +26 +26 +25 +25 +25 +21 +21 +20 +19 +18 +17 +15
64 QAM +24 +25 +25 +24 +24 +24 +19 +19 +18 +17 +16 +15 +13
128 QAM +24 +25 +25 +24 +24 +24 +19 +19 +18 +17 +16 +15 +13
256 QAM +23 +24 +24 +23 +23 +23 +18 +18 +17 +16 +15 +14 +12
Receiver Sensitivity (dBm) at BER 10-6 at Point C
(1+0 conf., 28 MHz BW, RF filter losses included)
AL /ALplus, ALS, ALplus2, ALplus2e 4 QAM -83/-89,5 -83/-89,5 -83/-89,5 -82,5/-89 -82,5/-89 -82,5/89 -82/-88,5 -82/-88,5 -81,5/-88 -81/-87,5 -80/-86 -80,5/-86,5 -85,5
(see Indoor Unit Table) 8 QAM -/-82,5 -/-82,5 -/-82,5 -/-82 -/-82 -/-82 -/-81,5 -/-81,5 -/-81 -/-80,5 -/-79 -/-79,5 -78,5
16 QAM -76/-81 -76/-81 -76/-81 -75,5/-80,5 -75,5/-80,5 -75,5/-80,5 -75/-80 -75/-80 -74,5/-79,5 -74/-79 -73/-77,5 -73,5/-78 -77
32 QAM -74/-77,5 -74/-77,5 -74/-77,5 -73,5/-77 -73,5/-77 -73,5/-77 -73/-76,5 -73/-76,5 -72,5/-76 -72/-75,5 -71/-74 -71,5/-74,5 -73,5
64 QAM -/-75,5 -/-75,5 -/-75,5 -/-75 -/-75 -/-75 -/-74,5 -/-74,5 -/-74 -/-73,5 -/-72 -/-72,5 -71,5
128 QAM -70,5/-73,5 -70,5/-73,5 -70,5/-73,5 -70/-73 -70/-73 -70/-73 -69,5/-72,5 -69,5/-72,5 -69/-72 -68,5/-71,5 -67,5/-70 -67,5/-70,5 -69,5
256 QAM -/-70,5 -/-70,5 -/-70,5 -/-70 -/-70 -/-70 -/-69,5 -/-69,5 -/-69 -/-68,5 -/-67 -/-67,5 -66,5
Frequency Stability ± 5 ppm
Frequency Agility 250 KHz (software programmable), 125 KHz on request
RTPC Up to 20/30 in 1 dB steps
ATPC Up to 20/40 dB in 1 dB steps
ManagementInterfaces RS232C, USB, Ethernet 10 BASE-T (TMN)
IDU/ODU Interconnection (per terminal) 50 Ω Coaxial Cable per RT
Dimensions (W x H x D)
1RU Compact IDU 480 x 45 x 212 (mm)
1RU Modular IDU 480 x 45 x 270 (mm)
2RU Modular IDU 480 x 90 x 270 (mm)
ASN ODU 1+0 254 x 254 x 114 (mm)
AS ODU 1+0 254 x 254 x 154 (mm)
Power Supply -48 Vdc (– 15%, + 20%)
Overall Power Consumption(per Terminal) ALC-ALCplus ALS-C ALCplus2
1+0 configuration ≤ 34 W ≤ 42 W ≤ 60 W
1+1 configuration ≤ 59 W ≤ 72 W ≤ 90 W
Environmental Performance ODU Weather Proofing Class IP65
IDU Temperature Range - 5 °C to +50 °C
ODU Temperature Range - 35 °C to +55 °C
Compliant with ETSI EN 302 217
(*) Typical values
(**) Nominal values according to ETSI
MEMBER OF:
2.5 Gbps
E-Band Full Outdoor
Whether in mobile, fix or private networks, the E-band
millimetre wave represents a new fundamental technology tool
bridging the gap between fibre high capacity systems and
flexible cost effective wireless transmission.
Fibre like capacity, highest deployment flexibility and
homogeneous operational behaviour as traditional microwave,
allow operators to fully liaise on existing knowledge and skills,
minimizing the introduction costs, while modernizing the
transport network.
Siena, Italy
MAIN FEATURES
• Up to 2.5 Gbps Throughput • Power Over Ethernet • “Fibre Mode” operation for
• Channel bandwidth from 250 to • Gigabit Ethernet and STM-1/E1 2xGigabit
1000 MHz interfaces • Packet Fragmentation to minimize
• BPSK/4/16/64 QAM modulation • InBand and OutBand Management jitter
schemes • Layer 1,2,3,4 Header Compression • Synchronous Ethernet and
IEEE 1588v2 support
• Hitless Adaptive Coding and (up to 200% throughput improvement)
Modulation • SM-OS based platform • CISCO Microwave Adaptive
• Full Carrier Ethernet protocol stack bandwidth feature interworking
• AES Encryption
TYPICAL APPLICATIONS
• Any-G Mobile Backhaul for Access • Last Mile fiber extension for • Complementary solution to fibre
and aggregation business customers deploy
• CRAN, CPRI front haul 2.5 Gbps • Emergency wireless links
Radio Access migration towards full packet technology is boosting demand for All Outdoor microwave equipments.
AGS20 enables this move by providing:
MEMBER OF:
ALFOplus80.L.03.15
Data subject to change without notice • All rights reserved © SIAE MICROELETTRONICA S.p.A. www.siaemic.com
ALFOplus2 series
Product Leaflet
ALFOplus2
The RF Multicore solution
Microwave radio always played a key role in mobile backhauling,
becoming the predominant technology in use.
With the evolution of mobile technology, microwave radio has
evolved to fit those requirements, always offering new and innovative
way to enable fast RAN deployments.
ALFOplus2 is the next generation 2/4 Gbps full outdoor solution to
enable successful launch of LTE, by providing best TCO while
boosting capacity and availability of the network.
Milano, Italy
MICROWAVE RADIO
ALFOplus2 series
MAIN FEATURES
• Dual carrier, Dual Core • SM-OS based platform • HQoS and traffic shaping
• 6 GHz to 42 GHz licensed bands • 4 x 1/2.5 Gbps Ethernet ports • OAM 802.1ag/ITU-T Y 1731
• In house technology Single chip RF • Multilayer Header Compression • MPLS ready platform
Multicore • Synchronous Ethernet and 1588v2 • Open Flow support for SDN
• Up to 2x112 MHz channels support • AES128/256 Encryption
• 4 QAM-2048 QAM with ACM • MEF Carrier Ethernet platform
• Single NE management
• Integrated XPIC circuitry • Switch fabric 46 Gbps • CISCO Microwave Adaptive
• L1 Link aggregation • PoE and dedicated power feeder Bandwidth interworking
• 4x4 MIMO support connectors
MAIN FEATURES
• Full frequency 6 GHz to 42 GHz coverage to address any application, offering very high modulation schemes to reach
4 Gbps capacity transport in a single compact unit.
• SM-OS Single Operating system common to all the SIAE MICROELETTRONICA’s product platform.
The SM-OS accelerates the distribution of new carrier grade features throughout the network. It guarantees common
consistent behavior and operational capacity for the entire portfolio. It’s brings flexibility where it is needed.
• Unmatched spectrum efficiency and larger channel selection (single 10/14 MHz up to 2x112 MHz channels).
• Integrated XPIC capability using 34% less power consumption than single carrier solutions.
• Future proof architecture that quadruples the throughput, achieves better link availability and reducing the antenna
size requested.
• Best in class system gain for Microwave Backhaul in all the frequency range.
• Drastic reduction in TCO thanks to high level of integration and Zero foot print.
Supported Configurations Single Unit - Dual Core: 1+0 / 1+1 / 2+0 / XPIC
Two Units - Quad Core: 2+2 / 4+0 / 1+1 XPIC / 4x4 MIMO
MEMBER OF:
ALFOplus2.L.01.15
Data subject to change without notice • All rights reserved © SIAE MICROELETTRONICA S.p.A. www.siaemic.com
AGS20 series
Product Leaflet
Bologna, Italy
MICROWAVE RADIO
AGS20 series
AGS20 is Universal Microwave Aggregation Platform addressing the need for carrier-class multi-technology traffic
aggregation.
Based on high performance Carrier Ethernet 2.0 engine (MPLS ready), the platform enables convergence of the major
microwave application segments:
• Next Generation indoor Unit for split Mount Radio
• Aggregation for All Outdoor Radio including E-Band
• Gateway handling Small Cell Radio Cluster
AGS20 (EasyCell Gateway) acts as small-cell cluster aggregator and manager providing the following features:
• Connectivity towards EasyCell small form factor radios
• Power over Ethernet and integrated lighting protection
• Gateway functionality between small cell backhauling radios and NMS: configuration, monitoring and management
at cluster level
MICROWAVE RADIO
AGS20 series
Universal Product Architecture
The increased number of application segments demands for a spread of microwave
technologies in order to address each of the segments in an effective and efficient way. This
scenario brings to a higher complexity in microwave portfolio challenging for the
consistency of the overall network solution and streamlined roadmap.
• Ethernet Core unit based on powerful switching gear featuring 25 Gbps full duplex capacity,
high performance dual-core CPU and embedded IEEE1588v2 processor for frequency and
phase synchronization
• SM-OS software based on carrier-grade field proven highly interoperable protocol stack to
provision standard MEF and MPLS services and is SDN ready
Operating System
AGS20s
New Generation split-mount Microwave
AGS20 can be configured as an Indoor Unit for split mount radio; named AGS20s. AGS20s brings superior packet
capabilities, certified to comply with LTE transport requirements. It supports TDM traffic, both native and pseudowire, to
allow easy network evolution from pure TDM to pure IP.
A complete range of interfaces (Radio, Gigabit/Fast Ethernet, E1, STM-1) and a high degree of versatility allow very easy
network planning and management.
Flexible Configuration
The IDU can host a variety of interfaces (a mix of GE and Radio IF interfaces), for maximum flexibility when
interconnecting heterogeneous technologies. Up to ten interfaces can be equipped in single 1RU equipment allowing
reaching up to ten different directions. Higher level of connectivity is provided by supporting IDU stackability for nodal
configuration, addressing demand for higher number of radio directions, GE and TDM interfaces.
MICROWAVE RADIO
AGS20 series
MAIN FEATURES
• 4 to 2048 QAM modulations • Mixed TDM/Ethernet interfaces • Indoor and Full utdoor mechanical
for dual native transport arrangement
• Hitless ACM adaptive code and
modulation • PWE3 TDM services defined by • Extended buffer for maximum
software TCP/IP efficiency in LTE networks
• Multi Layer Header Compression
• Synchronous Ethernet and IEEE • Integrated antennas up to 6ft. in dia.
• L1 Radio LAG up to 4 ODUs and 1588 v2 support
XPIC configuration in a 1RU IDU • Single Universal ODU for any
• SM-OS based platform capacity and modulation
• Convergence of all outdoor and
split-mount microwave • CISCO Microwave Adaptive • Unified Network Management
Bandwidth feature interworking System – NMS5
• Extended Ethernet connectivity:
8xGE interfaces • POE support
• Flexible QoS definition based on • RMON statistics per service • Jumbo Frames up to 12 Kbytes
VLAN, IPv4, IPv6, MPLS exp bits
TYPICAL APPLICATIONS
• 2G/3G/4G Cellular Network • Private Data Networks (WANs, • Small Cell backhauling
backhauling infrastructure LANs, etc)
• Spur Links for Backbones/Rings
• Leased Lines replacement • WiMAX Backhauling
• High capacity Broadband Access
• Utility Networks • Fiber Optics extension, Networks
(Railways, Oil&Gas) termination and backup
MEMBER OF:
AGS20L.04.15
Data subject to change without notice • All rights reserved © SIAE MICROELETTRONICA S.p.A. www.siaemic.com
MICROWAVE
RADIO
ALFOplusE.010.13 • Data subject to change without notice • All rights reserved © SIAE MICROELETTRONICA S.p.A.
Receiver Sensitivity at BER 10-6 at point C 7/8 GHz 13 GHz 15 GHz 17 GHz 18/23 38 GHz 42 GHz
LAYER 2 MAIN FUNCTIONALITIES (1+0 conf., 28/30 MHz RF Filter losses included) UNLICENSED * GHz
Carrier Ethernet services (EVP- LINE/LAN/TREE) 4 QAM strong -90,5 -91 -91 -89,5 -90,5 -88,5 -86,5
4 QAM -87,5 -87,5 -87,5 -86 -87 -85 -83
8 queues with flexible scheduler
16 QAM strong -83 -84 -84 -82,5 -83,5 -81,5 -79,5
(Strict, WFQ, mixed) 16 QAM -80 -81 -81 -79,5 -80,5 -78,5 -76,5
Per queue WRED congestion avoidance 32 QAM -78,5 -79,5 -79,5 -78 -79 -77 -75
64 QAM -75,5 -76,5 -76,5 -75 -76 -74 -72
Flow Based Ingress Policer (CIR & EIR definition) 128 QAM -72,5 -73,5 -73,5 -72 -73 -71 -69
Flexible QoS definition based on 256 QAM -69,5 -70 -70 -68,5 -69,5 -67,5 -65,5
VLAN, IPv4, IPv6, MPLS exp bits 512 QAM -66,5 -67,5 -67,5 -66 -67 -65 -63
1024 QAM -63,5 -63,5 -63,5 -62 -63 -61 -59
Extensive VLAN management
Frequency Stability ± 5 ppm
Link aggregation ATPC 20 dB range implemented in 1 dB steps
RTPC Up to 20 dB in 1 dB step, software programmable
Support for ERP Service Channels VoIP
ODU Connector RJ45 or SFP Optical Plug-in
Jumbo Frames up to 10Kbytes
Management Interfaces In band management
Mechanical Dimensions ODU (W x H x D) 254 x 254 x 154 (mm) 10 x 10 x 6 (in)
Power Supply 25 ÷ 60 VDC floating
Power Consumption (per terminal) ≤ 35W in 1+0 configuration
TYPICAL APPLICATIONS ≤ 70W in 1+1 configuration
Enviromental Performace
Any G-Mobile backhaul for Access and
ODU Weather Proofing Class IP65
Aggregation ODU Operational Temperature (standard range) -35° C to +55 ° C
Ethernet Characteristics MAC address switching, ageing and learning
Emergency wireless links
VLAN / VLAN STACKING (IEE 802.1ad with QinQ)
Last mile fibre extension for business Ethernet QoS (IEEE 802.1p)
Flow Control (IEEE 802.3x)
customers
RMON Statistics
Complementary solutions for fiber deploy LLF (Link Loss Forwarding)
LAG (Link Aggregation IEEE 802.3ad)
ISP High Capacity LAN to LAN connections ETH OAM (IEEE 802.1ag / ITU-T Y.1731)
RSTP (Rapid Spanning Tree Protocol)
Zero footprint applications Compliant with ETSI, FCC
* Unlicensed Frequency. Ouput Power values compliant with SRD ERC REC 70-03 using appropriated antenna, enanched RTPC and Constant Avg Mode
MEMBER OF: