Professional Documents
Culture Documents
ISOBUS Quick Reference Installation Guide: Liquid Fertilizer Anhydrous Ammonia Sprayer Spreader Slurry
ISOBUS Quick Reference Installation Guide: Liquid Fertilizer Anhydrous Ammonia Sprayer Spreader Slurry
Installation Guide
Liquid Fertilizer
Anhydrous Ammonia
Sprayer
Spreader
Slurry
1
2
Table of Contents
1 ISOBUS System Overview...............................................................3
1.1 Anhydrous Ammonia / Liquid Fertilizer...............................................3
1.2 Sprayer ............................................................................................3
1.3 Spreader............................................................................................4
1.4 Slurry ............................................................................................4
2 Liquid Fertilizer / NH3 / Sprayer Installation..................................5
2.1 Cabling Diagram................................................................................5
2.2 Field-IQ/AccuGuide/IntelliRate Cabling..............................................6
2.3 Field-IQ/AccuGuide/IntelliRate Cabling Description...........................7
2.4 Raven 4X0 Series Cabling ................................................................8
2.5 Raven 4X0 Series Cabling Description..............................................9
2.6 Raven 4XX0 Series Cabling ............................................................10
2.7 Raven 4XX0 Series Cabling Description.......................................... 11
2.8 Physical Installation.......................................................................... 11
2.9 Spartan Direct Injection System.......................................................15
3 Spreader Installation......................................................................19
3.1 Cabling Diagram..............................................................................19
3.2 Field-IQ/AccuGuide/IntelliRate Cabling............................................20
3.3 Field-IQ/AccuGuide/IntelliRate Cabling Description.........................21
3.4 Raven 660 Series Cabling ..............................................................22
3.5 Raven 660 Series Cabling Description............................................23
3.6 Physical Installation..........................................................................24
4 Slurry Installation...........................................................................28
4.1 Slurry Cabling Diagram....................................................................28
4.2 Slurry Cabling Diagram Description.................................................29
4.3 Physical Installation..........................................................................30
5 ISOBUS Resources........................................................................33
5.1 ISOBUS Demo Stand.......................................................................33
5.2 ISOBUS Online Resources..............................................................33
3
4
1 ISOBUS System Overview
1.1 Anhydrous Ammonia/Liquid Fertilizer
• ISOBUS compatible display
• ISOBUS ready tractor
12v 4
7
4
12v
5
1.3 Spreader
• ISOBUS compatible display
• ISOBUS ready tractor
hopper
cover
7
bin
level
1 2
bin
level belt
speed
HYD
12v 3 belt
speed
spinner
speed
2
1
12v
6
2 Liquid Fertilizer/NH3/Sprayer Installation
2.1 Cabling Diagram
7
2.2 Field-IQ/AccuControl/IntelliRate Cabling
8
2.3 Field-IQ/AccuControl/IntelliRate Cabling Description
Item Description Part Number Part Number Description
4 Master/Implement Switch
7 Power connection
8 Section connection
9 Rate connection
10 Aux. connection
13 Aux. I/O
9
2.4 Raven 4X0 Series Cabling
10
2.5 Raven 4X0 Series Cabling Description
Item Description Part Number Part Number Description
1 ISOBUS Harness ME0502001-03 Implement with Master Switch - 3ft.
ME0502001-08 Implement with Master Switch - 8ft.
ME0502001-13 Implement with Master Switch - 13ft.
ME0502001-21 Implement with Master Switch - 21ft.
ME0502001-28 Implement with Master Switch - 28ft.
ME0502001-36 Implement with Master Switch - 36ft.
ME0502001-43 Implement with Master Switch - 43ft.
2 Liquid ECU ME30481010
3 Liquid ECU to 4X0 Harness ME0512008
4 Master/Implement Switch
5 Pressure connection
6 Pressure Sensor * Denotes Raven part # 422-0000-090*
7 Raven Flow Cable 115-0159-858* Flow Cable 6 ft. 3 Boom
* Denotes Raven part # 115-0171-836* Flow Cable 12 ft. 3 Boom
8 Control Valve
9 Master On/Off Valve
10 Boom Valves
11 Flox Extension Cable 115-0159-016* Flow Extension Cable 6 ft.
115-0159-017* Flow Extension Cable 12 ft.
115-0159-019* Flow Extension Cable 24 ft.
* Denotes Raven part #
115-0171-544* Flow Extension Cable 36.5 ft.
12 Flow Meter
11
2.6 Raven 4XX0 Series Cabling
12
2.7 Raven 4XX0 Series Cabling Description
Item Description Part Number Part Number Description
1 ISOBUS Harness ME0502001-03 Implement with Master Switch - 3 ft.
ME0502001-08 Implement with Master Switch - 8 ft.
ME0502001-13 Implement with Master Switch - 13 ft.
ME0502001-21 Implement with Master Switch - 21 ft.
ME0502001-28 Implement with Master Switch - 28 ft.
ME0502001-36 Implement with Master Switch - 36 ft.
ME0502001-43 Implement with Master Switch - 43 ft.
2 Liquid ECU ME30481010
3 Liquid ECU to 4XX0 Harness ME0512009
4 Master/Implement Switch
5 Raven Flow Cable 115-0171-313* Flow Cable 12 ft. 10 Boom
115-0171-314* Flow Cable 24 ft. 10 Boom
115-0171-315* Flow Cable 12 ft. 5 Boom
* Denotes Raven part # 115-0171-316* Flow Cable 24 ft. 5 Boom
6 Control Valve
7 Boom Valves 063-0171-926* Boom Valve Cable - 1 section
063-0171-928* Boom Valve Cable - 3 section
* Denotes Raven part # 063-0171-039* Boom Valve Cable - 5 section
8 Pressure Sensor Cable 115-0171-235* Pressure Sensor Cable - 6 ft.
115-0171-151* Pressure Sensor Cable - 12 ft.
115-0171-224* Pressure Sensor Cable - 37 ft.
* Denotes Raven part # 115-0171-296* Pressure Sensor Cable - 44 ft.
9 Optional Pressure Sensor * Denotes Raven part # 422-000-090*
10 Flow Extension Cable 115-0159-016* Flow Extension Cable - 6 ft.
115-0159-017* Flow Extension Cable - 12 ft.
115-0159-019* Flow Extension Cable - 24 ft.
* Denotes Raven part # 115-0159-544* Flow Extension Cable - 36.5 ft.
11 Flow Meter
12 Flow Control Adapter Cable ZTN80584 Field-IQ to Raven flowmeter adapter
ZTN80539 Field-IQ to DICKEY-john encoder/flowmeter
13
2.8 Physical Installation
1. Route the ISO Implement Cable from the ECU to the implement hitch
point. This cable will mate with the Tractor ISOBUS connector. (factory
equipped)
14
3. Plugin the ISO Implement Cable harness to the ISOBUS connection
on the ECU. If the harness is connected incorrectly, the system will not
power up.
4. Connect the Liquid ECU harness to the 42-pin connector on the ECU.
15
5. Connect the adapter harness (Field-IQ/AccuControl/IntelliRate, Raven
4X0, Raven 4XX0) to the Liquid ECU harness. Next, connect your
adapter harness to the existing components on your implement.
16
2.9 Spartan Direct Injection System
Mueller Electronics recommends the Spartan Direct Injection System for
NH3. The parts below are designed and tested to work with the Mueller NH3
system and should be ordered directly from SureFire Ag Systems.
All four pump models are identical as viewed from the outside. Each pump
model has a different displacement to achieve the desired flow range. The
flow switch on the 110 and 120 models is a special low flow switch (which
also appears identical from the outside).
17
Each Spartan pump includes a bag with the items shown to be installed
according to this diagram.
Tank Kits:
18
Mixing Chambers:
The 55 and 100 Gallon Tank kits also include a black tank base for holding
rinse water or antifreeze. This makes it extremely easy to flush the Spar-
tan pump daily after use to reduce issues caused by chemical sitting in the
pump.
For any 30-60 ft wide applicator running 4-10 MPH speeds and applying
the recommended rate of 1 quart N-Serve / acre, the Spartan 130 model is
recommended.
19
Spartan Injection & Raven HP Cabling Guide:
20
3 Spreader Installation
ME SPREADER
3.1 Cabling Diagram GOOD
Foot Pedal Extension, 15ft.
Foot Pedal
with 12 ft. Cable 5
CNHi Harness
#77611-01
#75528-xx
Spreader
ECU
Master / implement
switch
SPREADER SYSTEM
Item Description
3
1a ISOBUS Harness
Spreader ECU 1b Trimble ISO to ECU Harness
Harness
2 Spreader ECU
3 Spreader Complete Harness
4a Raven 660 22-pin Adapter
4b FIQ/AccuCrtl/IntelliRate Adapter
Wheel
Speed 5 Foot Pedal w/ 12 ft. cable
4a 4b
rate encoder
control
Raven 660 Field IQ/ AccuCtrl/
22 pin Adapter IntelliRate
Adapter
21
3.2 Field-IQ/AccuControl/IntelliRate Cabling
9 10
13
11 12
14 15
22
3.3 Field-IQ/AccuControl/IntelliRate Cabling Description
Field-IQ / AccuControl / IntelliRate Spreader Harness
Item Description Part Number Part Number Description
1 ISOBUS Harness ME0502001-03 Implement with Master Switch - 3ft.
ME0502001-08 Implement with Master Switch - 8ft.
ME0502001-13 Implement with Master Switch - 13ft.
ME0502001-21 Implement with Master Switch - 21ft.
ME0502001-28 Implement with Master Switch - 28ft.
ME0502001-36 Implement with Master Switch - 36ft.
ME0502001-43 Implement with Master Switch - 43ft.
2 Spreader ECU ME30481050
3 Spreader Complete Harness ME0511000
4 Master/Implement Switch
5 Radar Input Connection
6 Rate Connection
7 Rate Control Extension
8 Field-IQ/AccuCtrl/IntelliRate Adapter ME0502025
Harness
9 Aux Connection
10 Spinner Control Connection
11 Control Connection
12 Feedback Connection
13 Spreader gate height & spinner ZTN80507
speed Adapter Cable
14 Flow Control Adapter Cable:
• Field-IQ to Raven Fast Valve ZTN80534
• Field-IQ to Raven Control Valve ZTN80586
adapter
• Dickey-john Control Valve adapter ZTN80960
(2 pin)
15 Field-IQ to Dickey-John encoder/ ZTN80539
flowmeter
23
3.4 Raven 660 Series Cabling
10 14
11 14
12 13
24
3.5 Raven 660 Series Cabling Description
Raven 660 Spreader Harness
Item Description Part Number Part Number Description
1 ISOBUS Harness ME0502001-03 Implement with Master Switch - 3ft.
ME0502001-08 Implement with Master Switch - 8ft.
ME0502001-13 Implement with Master Switch - 13ft.
ME0502001-21 Implement with Master Switch - 21ft.
ME0502001-28 Implement with Master Switch - 28ft.
ME0502001-36 Implement with Master Switch - 36ft.
ME0502001-43 Implement with Master Switch - 43ft.
2 Spreader ECU ME30481050
3 Spreader Complete Harness ME0511000
4 Master/Implement Switch
5 Radar Input Connection
6 Rate Connection
7 Rate Control Extension
8 Raven 660 Adapter Harness ME0502014
9 Spinner Control Connection
10 Raven Flow Cable *Denotes Raven part # 115-0159-787*
11 Encoder
12 Flow Extension Cable 115-0159-016* Flow Extension Cable - 6ft.
115-0159-017* Flow Extension Cable - 12ft.
115-0159-019* Flow Extension Cable - 24ft.
*Denotes Raven part # 115-0171-544* Flow Extension Cable - 36.5ft.
13 Clutches and Sensors
14 Hydraulic Valve Control
25
3.6 Physical Installation
1. Route the ISO Implement Cable from the ECU to the implement hitch
point. This cable will mate with the Tractor ISOBUS connector. (factory
equipped)
26
3. Plugin the ISO Implement Cable harness to the ISOBUS connection
on the ECU. If the harness is connected incorrectly, the system will not
power up.
4. Connect the Liquid ECU harness to the 42-pin connector on the ECU.
27
5. Connect the Rate Extension harness to the Spreader ECU harness.
28
29
4 Slurry Installation
4.1 Slurry Cabling Diagram
30
4.2 Slurry Cabling Diagram Description
ISOBUS Slurry System
Item Description Part Number Part Number Description
1a ISOBUS Harness ME0502001-03 Implement with Master Switch - 3ft.
ME0502001-08 Implement with Master Switch - 8ft.
ME0502001-13 Implement with Master Switch - 13ft.
ME0502001-21 Implement with Master Switch - 21ft.
ME0502001-28 Implement with Master Switch - 28ft.
ME0502001-36 Implement with Master Switch - 36ft.
ME0502001-43 Implement with Master Switch - 43ft.
1b Trimble ISO to ECU Harness ME0502036
2 Slurry ECU ME30481100
3 Slurry to Raven Adapter Harness ME0513000
4 Foot Pedal with 12 ft. Cable ME0520000 Foot Pedal with 12 ft. Cable
ME0520001 Foot Pedal Extension - 15 ft.
ME3032259206 Downloadbox
31
4.3 Physical Installation
1. Route the ISO Implement Cable from the ECU to the implement hitch
point. This cable will mate with the Tractor ISOBUS connector. (factory
equipped)
32
3. Plugin the ISO Implement Cable harness to the ISOBUS connection
on the ECU. Make sure you don’t connect the harness to the OUT side
of the ECU. If the harness is connected incorrectly, the system will not
power up.
33
5. Connect the adapter harness into the Raven 660 harness.
34
5 ISOBUS Resources
5.1 ISOBUS Demo Stand
This is a great tool for ISOBUS sales demo, ECU configuration, and software
updating. Order the kit from the part numbers below.
ME0901001
Part Number: Description:
ME0901001 ME_VB Demo Board
ME0502015* Harness, Pro700 Case IH Display Adapter with CPC & Asst Steer-
ing Breakout
ME0502001-03* Implement with Master Switch – 3 ft. Used to connect ECU to
Demo Stand
*Not shown in picture above
Limited Stock - delivery times maybe 4 to 6 weeks
35
36