Professional Documents
Culture Documents
Installation Manual VI-505/IC-412: Index
Installation Manual VI-505/IC-412: Index
INSTALLATION MANUAL
Index
INSTALLATION MANUAL
Applied Machines: d-Color MF360/MF280
COLOR MFP: 36 ppm/28 ppm
Product Code: A0ED
1
A0YEIXC002DA
3. Screw A *
(4 × 8 mm) 1
4040IXC046DA
4. Shoulder
A0YEIXC001DA
screws for
2. Power cord A mounting the 2
relay circuit
1
board A0YEIXC005DB
A00HIXC019HA 5. Shoulder
3. Power cord B screws for the
*1 relay circuit 2
(for the wall 1 board connec-
outlet) tor A0YEIXC047DA
A00HIXE034HA
6. Upper mount-
4. Copier ing bracket
LAN cable
(crossover 1 1
cable)
A00HIXC018HA A0YEIXC074DA
8. Screw B
A0YEIXC003DA
(3 × 20 mm)
6. Ferrite Core 4
1 9J08IXC075DA
9. Installation
A0YEIXC054DA manual
7. Other accesso-
- - 1 set
ries *2
LAN
Port 1
COPIER
Port 2
Power
cord con-
nector
Image transmission
Softswitch LED connector
Copier LAN cable port (Port 2)
A0YEIXC006DA
A0YEIXC057DA
A0YEIXC058DA
A0YEIXC014DA
A0YEIXC056DA
A0YEIXC015DB
A0YEIXC017DA
A0YEIXC018DA
A0YEIXC059DA
Knockout
A0YEIXC061DA
A0YEIXC060DA
A0YEIXC064DA
A0YEIXC065DA
A0YEIXC066DA
A0YEIXC067DA
A0YEIXE072DA
A0YEIXC069DA
<110-127 V regions>
26. Plug the copier and image controller power
cords into an outlet.
Port 2
Port 1
A0YEIXC071DA
INSTALLATION MANUAL
Applied Machines: d-Color MF651/MF551/MF451
COLOR MFP: 65 ppm/55 ppm/45 ppm
Product Code: A0P0/A0P1/A0P2
2. Power cord *
(For connection
1 between copier
1
and IC)
A0YEIXC002DA
3. Screw *
A0YEIXC001DA
(4 × 8 mm) 1
2. Power cord *1 4040IXC046DA
4. Shoulder
1
screws for
A00HIXC019HA
mounting the 2
relay circuit
3. Power cord *2 board A0YEIXC005DB
(for the wall
outlet) 1 5. Shoulder
screws for the
A00HIXE034HA relay circuit 2
4. Copier board connec-
LAN cable tor A0YEIXC047DA
(crossover 1 6. Installation
cable) manual
A00HIXC018HA
1 set
5. Image
transmission
cable 1 4980IXC019DA
A0YEIXC003DA
* Using or not using the part depends on each
6. Ferrite Core market.
1
A0YEIXC054DA
LAN
Ethernet 10Base-T/100Base-TX/1000Base-T Port 1
network port (Port 1)
COPIER
Port 2
A00HIXC033HB
<Softswitch>
• Lights up when the image controller is running or
is ready to be used.
• When turned on, the image controller system
starts up.
• When turned off, the image controller system
safely shuts down.
Note: A0YEIXC008DB
• If the image controller malfunctions or cannot
be shut off with the softswitch, be sure to 3. If the fax kit has been installed, loosen the two
unplug the power cord from the electrical outlet screws, and then remove the circuit board from
or the machine’s power cord connector. the copier.
• Remove the seal from the connector of the
power cord.
A0YEIXC009DA
A0YEIXC011DC
A0YEIXC014DA
A0YEIXC012DB
A0YEIXC015DB
A0YEIXC013DB
A0YEIXC016DA
A0YEIXC041DA
11. Using the two screws, secure the relay circuit A0YEIXC042DA
board.
Note: 17. Remove the right side rear lower cover (two
Be sure to use the two screws removed in step 7. screws).
A0YEIXC017DA A0YEIXC046DA
12. Using the two supplied shoulder screws for the 18. Remove the center cover from the right side rear
relay circuit board connector, secure the connec- lower cover removed in step 17 (two screws).
tor of the relay circuit board.
A0YEIXC043DA
A0YEIXC018DA
A0YEIXE052DA
A0YEIXE053DA
Threaded hole
A0YEIXE036DA
Power cord
A0YEIXE051DA
A0YEIXE038DB
A0YEIXE039DA
A0YEIXE040DA
A0YEIXC026DA
Threaded hole
A0YEIXC055DA
A0YEIXC029DB
A0YEIXC031DB
A0YEIXC026DA
A0YEIXC045DA
Port 2
Port 1
A0YEIXC035DA