Professional Documents
Culture Documents
Question (1) (10 Marks)
Question (1) (10 Marks)
Faculty of Engineering
Civil Engineering Department
1pg.
Question (2) (10 marks)
For the concrete bored pile with diameter 0.6m as shown in Fig.2:
i. Determine the allowable capacity of the pile (FS = 3).
ii. Does this pile support column load 1150 kN safely?
Fig. 2
The plan of a group pile is shown in the Fig. 3. Assume that the piles are
concrete pile embedded in saturated homogeneous clay having a ca = 55
kN/m2. Given: diameter of piles (D) = 400 mm, center-to-center spacing of
piles = 1000 mm, and length of piles = 20 m. Find the allowable load-
carrying capacity of the pile group. Use FS = 3.
Fig. 3
2pg.
Question (4) (10 marks)
Given: The yield stress of the pile material Fy = 248 MN/m2; the unit weight of
soil, γ = 18 kN/m3; the undrained cohession strength cu = 100 kN/m2; No moment
applied on the pile head, Mg = 0; Steel H-Pile is used (HP 250*85); Ip = 123*10-6
m4; Ep= 207*106 kN/m2; k =5000 kN/m3; embeded pile length, L = 12m.
3pg.
Where:
4pg.