Professional Documents
Culture Documents
A Study of Double Helix Pandora
A Study of Double Helix Pandora
A Study of Double Helix Pandora
listen-up.org/kitty/beads/pandora.htm
All beads were made using a Cricket torch, Regailia OxyCon, &
bulk propane
then pressed using Zoozii's Medium (18mm x 8mm) Slim Sided
Lentil Brass Press unless otherwise
noted. Annealing was done in a Scutt GMF10
Kiln. I hold at whatever temp is in the chart for
however long is in the chart. Then the kiln
holds there for 30 minutes, and the drops 100º
F/hour
till the temp reaches 700º F, then it shuts off
and I leave it till it reaches room
temp. It's usually a total of around 12 hours before I take it out of the kiln.
Neutral 1 - Cooled in
Vermiculate then Batch
annealed @ 968º F.
Neutral 2 - Cooled in
Vermiculate then Batch
annealed @ 1000º F.
1/3
Neutral 6 - Garaged for 3 hours
then annealed @
1000º F.
Oxygen 9 - Cooled in
Rich Vermiculate then Batch
annealed @ 968º F.
Propane 10 - Cooled in
Rich Vermiculate then Batch
annealed @ 968º F.
HotHead 14 - Cooled in
Flame Vermiculate then Batch
annealed @ 968º F.
2/3
This is what Pandora looks like when used as a frit for my frit studies. I really
am at a loss to explain the red unless it's overstriking but for the extended
heating bead, the frit stayed mostly green.
3/3