Wall Switch

Wiring Diagrams

Dimming Wall Switch Wiring Diagrams

WSX D & SPODRMD – WIRING TO GROUND (NO NEUTRAL) WSX D & SPODMRD – WIRING TO NEUTRAL

WIRING TO GROUND (NOWIRING

NEUTRAL)
TO GROUND (NO NEUTRAL) WIRING TO NEUTRAL WIRING TO NEUTRAL

WSX D 2 WSX D 2
(+) (+)
(+) (+)
(—)
DIMMING (—)
DIMMING DIMMING DIMMING
(—) (—)

WSX EZ D WIRING TO GROUND (NO NEUTRAL) WIRE KEY

120/277 VAC WIRING

- Line/Load Miswire Protected

347 VAC WIRING (-347 Option)

wires replace wires.
WIRING TO GROUND (NOWIRINGNEUTRAL)TO GROUND (NO NEUTRAL) WIRING TO NEUTRAL WIRING TO NEUTRAL
(+) 0-10 VDC
(— ) - Low Voltage Dim Output (0-10 VDC)
- Low Voltage Common
NOTE:
Per NEC requirements, the 0-10V violet and gray
SPODMRD 1. Relay remains closed
SPODMRD wires must be installed as Class One.
2. Load BLK wire driver hot
(+) (+) The 0-10V
(+)
control wires must not (+)
exceed 250 ft
(—)
DIMMING (—)
DIMMING (76 m) in length and must be sized atDIMMING
DIMMING no less than
(—) (—)
20AWG.

www.acuitycontrols.com
Wall Switch Occupancy Sensor Wiring Diagrams

WALL SWITCH – 1-POLE NEUTRAL/GROUND WALL SWITCH – 1-POLE GROUND

WALL SWITCH – 2-POLE NEUTRAL/GROUND WALL SWITCH – 2-POLE GROUND

SSD 120 PRESET TIMER SWITCH

WALL SWITCHES: LOW VOLTAGE

BLK - 120 V
PP20 ORN - 277 V

R - RELAY OPTION

One One
One Lithonia
Lithonia
Lithonia |Way,
WayWay Conyers,
Conyers, GA 30012
Georgia
| Conyers, Georgia 30012 | |Phone:
30012 Phone:800.535.2465
800.535.2465
| Phone: 800.279.8041| |www.acuitycontrols.com
www.acuitycontrols.com
| Fax: 770.918.1209 | www.lithonia.com
©Acuity
2016 Brands
AcuityLighting,
Brands Inc.
Lighting, Inc. All Rights Reserved.
| 10/15 | 3/16 | SSI_2844
©2015
© 2014 Acuity Brands All rights
Lighting, Inc. reserved.
All rights reserved. | Rev.| 8/14
SSI_2204
| Job No. LL_OP_0039