This document provides an ordering code for a Bosch Rexroth AG Hydraulics product. The 3-sentence summary is:
The ordering code includes details such as whether the product has integrated electronics, its size, control spool symbols, electrical connection type, supply voltage, rated flow at valve pressure differential, and seal material. Spools E1–, V1– and W1– have maximum or half maximum flow between ports in different positions. The zero position of spools W and WA connect ports A to T and B to T with approximately 3% of the nominal cross-section.
This document provides an ordering code for a Bosch Rexroth AG Hydraulics product. The 3-sentence summary is:
The ordering code includes details such as whether the product has integrated electronics, its size, control spool symbols, electrical connection type, supply voltage, rated flow at valve pressure differential, and seal material. Spools E1–, V1– and W1– have maximum or half maximum flow between ports in different positions. The zero position of spools W and WA connect ports A to T and B to T with approximately 3% of the nominal cross-section.
This document provides an ordering code for a Bosch Rexroth AG Hydraulics product. The 3-sentence summary is:
The ordering code includes details such as whether the product has integrated electronics, its size, control spool symbols, electrical connection type, supply voltage, rated flow at valve pressure differential, and seal material. Spools E1–, V1– and W1– have maximum or half maximum flow between ports in different positions. The zero position of spools W and WA connect ports A to T and B to T with approximately 3% of the nominal cross-section.
This document provides an ordering code for a Bosch Rexroth AG Hydraulics product. The 3-sentence summary is:
The ordering code includes details such as whether the product has integrated electronics, its size, control spool symbols, electrical connection type, supply voltage, rated flow at valve pressure differential, and seal material. Spools E1–, V1– and W1– have maximum or half maximum flow between ports in different positions. The zero position of spools W and WA connect ports A to T and B to T with approximately 3% of the nominal cross-section.
Bosch Rexroth AG Hydraulics 4WRE; 4WREE RE 29061/11.12
Ordering code
4WRE 2X G24 V *
Without integrated Further details in
electronics (OBE) = no code the plain text With integrated Seal material electronics (OBE) =E V = FKM seals 1) Size 6 =6 Electronic interface Size 10 = 10 A1 = Command value ±10 V Control spool symbols F1 = Command value 4 to 20 mA no code = Type 4WRE
Electrical connection Type 4WRE: K4 = Without mating connector, = E with connector according to DIN EN 175301-803 E1– Mating connector (solenoid, position transducer), separate order, see page 8 Type 4WREE: = V K31 = Without mating connector, V1– with connector according to DIN EN 175201-804 Mating connector – separate order, see page 9 = W Supply voltage W1– G24 = Direct voltage 24 V 2X = 20 to 29 (20 to 29: unchanged installation and connection dimensions) Rated flow at valve pressure differential Δp = 10 bar Size 6
P → A: qV max B → T: qV/2 1) Design SO660 with NBR seals at the valve connection surface P → B: qV/2 A → T: qV max Notice: In the zero position, spools W and WA have a con- nection from A to T and B to T with approx. 3 % of the relevant nominal cross-section.