Professional Documents
Culture Documents
ACG Standrad Dimension of Capsules
ACG Standrad Dimension of Capsules
DIMENSIONS
Dimensional Assessment
1. CAPACITY
Body Volume (ml) 1.37 1.02 0.95 0.82 0.78 0.78 0.68
2. WEIGHT
Tolerance in % ±7 ±7 ±7 ±7 ±7 ±7 ±7
3. LENGTH
Cap Nominal (mm) 13.0 13.0 11.8 11.8 12.0 11.7 10.7
Body Nominal (mm) 22.2 22.2 20.2 21.8 21.0 20.3 18.5
Nominal
25.9 25.5 23.5 24.8 24.2 23.2 21.4
Joined length (mm)
Cap Nominal (mm) 9.96 8.55 8.55 7.66 7.66 7.66 7.66
Body Nominal (mm) 9.61 8.22 8.22 7.34 7.34 7.34 7.34
https://apps.acg-world.com/products/print_technical_manual_pages_details.php?id=329 1/3
3/15/2021 Dimensions
1. CAPACITY
Body Volume (ml) 0.54 0.50 0.41 0.37 0.30 0.21 0.10
2. WEIGHT
Tolerance in % ±7 ±7 ±7 ±7 ±7 ±7 ±7
3. LENGTH
Cap Nominal (mm) 10.5 9.8 9.7 9.0 8.1 7.2 6.2
Body Nominal (mm) 17.7 16.6 16.7 15.2 13.6 12.2 9.3
Nominal
20.4 19.3 19.3 17.8 15.8 14.4 11.4
Joined length (mm)
Cap Nominal (mm) 6.93 6.93 6.37 6.37 5.85 5.33 4.91
Body Nominal (mm) 6.63 6.63 6.08 6.08 5.57 5.06 4.65
https://apps.acg-world.com/products/print_technical_manual_pages_details.php?id=329 2/3
3/15/2021 Dimensions
Dimensions of capsules are controlled statistically to ensure conformance to speci cations
NOTE 1:
Empty capsules can be lled with powders, granules, pellets, tablets, semisolid materials, pastes etc. The
useful capacity value is the available volume of the capsule body.
NOTE 2:
The average empty capsule weight is estimated by a representative sample of 100 capsules. Signi cant
variation in average weight will occur if moisture content changes. Moisture content of capsules is
assumed to be 14 % and tolerances are given at 99.7% con dence level.
NOTE 3:
Capsule cap / body length is controlled during manufacture and each lot is audited for conformance to
speci cation.
NOTE 4 :
Not recommended for capsules closed o ine by hand. This is a recommendation for machine setting for
appropriate locking
NOTE 5
The body diameters are indicative only. Body diameters are adjusted to achieve correct t, oriented
towards better machinability.
Issue No.: 07
Revision No.: 03
E ective Date: 08/09/2020
https://apps.acg-world.com/products/print_technical_manual_pages_details.php?id=329 3/3