Professional Documents
Culture Documents
BOMAG - Full Product Guide PRE101334 - 1903
BOMAG - Full Product Guide PRE101334 - 1903
0 12 80 0
0 0 35
= 122 C
Technical data may have country specific deviations.
Light Equipment
TABLE OF CONTENTS
3
Shipping dimensions in m3
BT 60 0,262
BT 65 0,262
BT 60, BT 65
-Protective engine covering
-Paper air filter system with two
stages
Dimensions in mm
-Automatic oil level control
-Dual fuel filter system B
Vibration insulated steering bow BT 60 3
Self-cleaning air filter housing BT 65 3
Protective covering
Single point lifting device
Recoil starter
Technical Data
Plastic castor as loading aid
Infinitely variable frequency
Combination of engine stop/fuel
switch Weights
h-/ rpm meter Operating weight CE
3-2-1 Warranty Basic weight ..........
Fields of application:
Earthwork and asphalt construction.
Pipeline, trench and sewer line construction, back-
fills, foundations and repair work on asphalt.
Standard Equipment
Engine Protection System
-Protective engine covering
-Paper air filter system with two
stages
Dimensions in mm
-Automatic oil level control
-Dual fuel filter system B H L L1 W
Vibration insulated steering bow BT 60 350 1030 728 335 230
Self-cleaning air filter housing BT 65 350 1030 728 335 280
Protective covering
Single point lifting device B
Recoil starter H
Technical Data BOMAG BOMAG
Plastic castor as loading aid D
Infinitely variable frequency BT 60 BT 65 P
Combination of engine stop/fuel T
switch Weights F
h-/ rpm meter Operating weight CECE ........................................... kg 58 68
3-2-1 Warranty Basic weight ............................................................. kg 57 PRE 541 67
13 010 040219 Sa02
4 Dimensions
Optional Equipment
H L L1 W Transport device with puncture Working width (tamper plate) ................................... mm 230 280
proof wheels
Dimensions inDimensions
mm Dimensions
in mm in mm
matic
ntrol-Automatic
oil level control
oil level control
uel filter
-Dualsystem
fuel filter system B H L BL1 HW B L H
L1 LW L1 W
on
ering
insulated
Vibration
bow steeringinsulated
BT 60 bow steeringBT
bow
60
350 1030 BT 60 728 350 335 1030 230 350
728 1030 335 728 230 335 230
eaning
housing
Self-cleaning
air filter housing
air filter housing
BT 65 BT 65
350 1030 BT 65 728 350 335 1030 280 350
728 1030 335 728 280 335 280
tive covering
Protective covering
Light Equipment
point
ce Single
lifting point
devicelifting device
starter
ng
Recoil starter
castor
aid
Plastic
as loading TECHNICAL DATA
Technical DataTechnical Technical
castor as aidloading aid
Data Data BOMAG BOMAGBOMAG BOMAGBOMAG BOMAG
uency
ly variable
Infinitely
frequency
variable frequency BT 60 BT 60BT 65 BT 60 BT 65 BT 65
enation
stop/fuel
Combination
of engine stop/fuel
of engine stop/fuel
switch Weights Weights Weights
m meterh-/ rpm meter Operating weight Operating
CECE ...........................................
weight
Operating CECE weight kg 58
...........................................
CECE ...........................................
kg 68
58 kg 58 68 68
Warranty
3-2-1 Warranty Basic weight .............................................................
Basic weight Basic kg 57
.............................................................
weight .............................................................
kg 67
57 kg 57 67 67
5
Shipping dimensions in m3
BVT 65 0,262
BVT 65
-Protective engine covering
-Automatic oil level control
-Dual fuel filter system
Dimensions in mm
Vibration insulated steering bow
Self-cleaning air filter housing B
Protective covering BVT 65 3
Single point lifting device
Recoil starter
Plastic castor as loading aid
Infinitely variable frequency
Technical Data
Combination of engine stop/fuel
switch
3-2-1 Warranty
Weights
Optional Equipment Operating weight CE
Transport device with puncture Basic weight ..........
proof wheels
Tamper foot widths Dimensions
(160-330mm) Working width (tamp
Tamper foot extensions Driving Characteri
h-/ rpm meter Working speed max
Special painting Area coverage max
Tool kit
Service Kit Drive
TOUGH WARRANTY Engine manufacture
Type ......................
Emission stage ......
Cooling ..................
Number of cylinders
Performance SAE J
Fuel .......................
Drive system ..........
Fuel comsump. ave
Exciter system
Frequency .............
Impact force ...........
Capacities
Fuel .......................
Technical modifications reserve
Fields of application:
Earthwork and asphalt construction.
Pipeline, trench and sewer line construction, back-
fills, foundations and repair work on asphalt.
Standard Equipment
Engine Protection System
-Protective engine covering
-Automatic oil level control
-Dual fuel filter system
Dimensions in mm
Vibration insulated steering bow
Self-cleaning air filter housing B H L L1 W
Protective covering BVT 65 350 1030 728 335 280
Single point lifting device
Recoil starter
Plastic castor as loading aid B
Infinitely variable frequency H
Technical Data BOMAG D
Combination of engine stop/fuel
switch P
BVT 65 T
3-2-1 Warranty
F
Weights
Optional Equipment Operating weight CECE ........................................... kg 67
Basic weight ............................................................. kg 66 PRE 541 21 010 040219 Sa01
Transport device with puncture
6 proof wheels
Tamper foot widths Dimensions
H L L1 W Working width (tamper plate) ................................... mm 280
(160-330mm)
Dimensions inDimensions
mm in mm
on
ering
insulated
bow steering bow
eaning
housingair filter housing B H L BL1 HW L L1 W
ive covering BVT 65 BVT350
65 1030 728 350335 1030
280 728 335 280
ice
point lifting device
starter
Light Equipment
ng
castor
aid as loading aid
uency
y variable frequency
enation
stop/fuel TECHNICAL DATA
Technical DataTechnical Data
of engine stop/fuel BOMAG BOMAG
BVT 65 BVT 65
Warranty
Weights Weights
Equipment Operating weight CECE ...........................................
Operating kg 67
weight CECE ........................................... kg 67
puncture Basic weight .............................................................
ort device with puncture kg 66
Basic weight ............................................................. kg 66
wheels
r foot widths Dimensions Dimensions
30mm) Working width (tamperWorkingplate) width...................................
(tamper plate) ...................................
mm 280 mm 280
nsr foot extensions Driving Characteristics
Driving Characteristics
meter Working speed Working max. ................................................ m/min 20
speed max. ................................................ m/min 20
l painting Area coverage Area max. coverage
................................................. m2/h 336
max. ................................................. m2/h 336
t
e Kit
3 Drive Drive
H WARRANTY Engine manufacturer Engine................................................
manufacturer ................................................
Honda Honda
0,136 Type .........................................................................
Type .........................................................................
GX 100 GX 100
Emission stageEmission stage .........................................................
......................................................... StageV/CARB P.3 StageV/CARB P.3
0,167 Cooling .....................................................................
Cooling .....................................................................
air air
Number of cylinders Number of cylinders .................................................
................................................. 1 1
Performance SAE Performance kW
SAE J 1349 ........................................
J 1349 ........................................ 2,3 kW 2,3
Fuel ..........................................................................
Fuel .......................................................................... Gasoline Gasoline
Drive system ............................................................
Drive system ............................................................ mech. mech.
Fuel comsump.Fuel aver.comsump. aver. during
during operation operationl/h
.................... ....................
0,9 l/h 0,9
ng bow, Exciter systemExciter system
Frequency ................................................................
Frequency ................................................................ Hz 10- 11,8Hz 10- 11,8
Impact force .............................................................
Impact force ............................................................. kN 16,0 kN 16,0
dle
Dimensions
Capacities in mm
Capacities
e plate
w oil H H1 H2 L
Fuel .......................................................................... L1
l W3,0
Fuel .......................................................................... l 3,0
Technical modifications reserved.
Technical Machines
modifications
mayreserved.
be shownMachines
with options.
may be shown with options.
BP 10/35 658 962 700 1084 532 350
BP 12/40 658 962 700 1084 542 400
7
Shipping dimensions in m3
BT 80 D 0,268
BT 80 D
Vibration insulated steering bow
Self-cleaning air filter housing
Integrated fuel filter
Dimensions in mm
Protective engine covering
Engine shut-down switch B
integrated in steering handle BT 80 D 3
Infinitely variable frequency
Single point lifting device
Plastic castor as loading aid
Semi-automatic decompression
Technical Data
Recoil starter
3-2-1 Warranty
Optional Equipment Weights
Operating weight CE
Transport device with puncture Basic weight ..........
proof wheels
Tamper foot widths Dimensions
(280-290mm) Working width (tamp
Tool kit Driving Characteri
Service Kit Working speed max
TOUGH WARRANTY
Drive
Engine manufacture
Type ......................
Emission stage ......
Cooling ..................
Number of cylinders
Performance ISO 30
Speed ....................
Fuel .......................
Drive system ..........
Fuel comsump. ave
Exciter system
Frequency .............
Impact force ...........
Capacities
Fuel .......................
Technical modifications reserve
Fields of application:
Earthwork and asphalt construction.
Pipeline, trench and sewer line construction, back-
fills, foundations and repair work on asphalt.
Standard Equipment
Light Equipment
cngcastor
aid as loading aid
mpression
automatic decompression
starter
TECHNICAL DATA
Technical DataTechnical Data BOMAG BOMAG
Warranty BT 80 D BT 80 D
Equipment Weights Weights
Operating weight Operating
CECE ...........................................
weight CECE ...........................................
kg 81 kg 81
port device with Basic
puncture weight .............................................................
puncture Basic weight .............................................................
kg 80 kg 80
wheels
er foot widths Dimensions Dimensions
90mm) Working width (tamper Workingplate) width................................... mm 330
(tamper plate) ................................... mm 330
it Driving Characteristics
Driving Characteristics
e Kit Working speed max. Working speed max. ................................................
................................................ m/min 16 m/min 16
H WARRANTY
Drive Drive
3 Engine manufacturer Engine manufacturer ................................................
................................................ Yanmar Yanmar
Type .........................................................................
Type ......................................................................... L 48 L 48
0,136 Emission stage Emission stage .........................................................
......................................................... non EPA non EPA
Cooling .....................................................................
Cooling ..................................................................... air air
0,167 Number of cylinders Number of cylinders .................................................
................................................. 1 1
Performance ISO Performance ISO 3046 ............................................
3046 ............................................ kW 3,1 kW 3,1
Speed .......................................................................
Speed ....................................................................... min-1 3.600 min-1 3.600
Fuel .......................................................................... Diesel
Fuel .......................................................................... Diesel
Drive system ............................................................ mech.
Drive system ............................................................ mech.
Fuel comsump. Fuel aver.comsump.
during operationaver. during operationl/h....................
.................... 0,7 l/h 0,7
ng bow, Exciter systemExciter system
Frequency ................................................................
Frequency ................................................................
Hz 8- 11,5 Hz 8- 11,5
Impact force ............................................................. 17,5
Impact force .............................................................
kN kN 17,5
dle
Dimensions in mm
e plate Capacities Capacities
w oil H H1 H2 L
Fuel .......................................................................... L1
l W3,0
Fuel .......................................................................... l 3,0
Technical modifications reserved.
TechnicalMachines
modifications
may reserved.
be shown Machines
with options.
may be shown with options.
BP 10/35 658 962 700 1084 532 350
BP 12/40 658 962 700 1084 542 400
9
Shipping dimensions in m3
BVP 10/30 0,111
BVP 12/50 A 0,251
Standard Equipment
Light Equipment
level
starter
ice
Recoil starter
pointSingle
lifting point
deviceTECHNICAL DATA
Technical DataTechnical Technical
lifting device
Data Data BOMAG BOMAGBOMAG BOMAGBOMAG BOMAG
rotected
FullyV-belt
protected V-belt BVP 10/30 BVP BVP
10/30
12/50
BVPA10/30 BVP 12/50BVP
A 12/50 A
ng handles
Carrying handles
Warranty3-2-1 Warranty Weights Weights Weights
P12/50A)
ler system
Sprinkler Operating
(BVP12/50A)
system weight
(BVP12/50A) Operating weight CECE ...........................................
CECE ...........................................
Operating weight kg
CECE ...........................................
kg 47 47 kg
72 47 72 72
Basic weight 46
.............................................................
Basic weight .............................................................
Basic kg
weight .............................................................
kg 46 kg
67 46 67 67
Equipment
Optional Equipment
Dimensions Dimensions Dimensions
al painting
Special painting Working width ..........................................................
Working width ..........................................................
Working mm
width ..........................................................
mm 300 300mm
500 300 500 500
0)matPlastic
(BVP10/30)
matDriving
(BVP10/30) Driving Characteristics
Characteristics Driving Characteristics
e Kit Service Kit Working speed,Working speed,
max. ...............................................
Working max. ...............................................
speed, max. ...............................................
m/min 25 m/min 25 m/min 25 25 25 25
H WARRANTY
TOUGH WARRANTY Max. gradeability Max.
(dep. gradeability
on Max.
soil con.) (dep. on soil
gradeability con.)
........................
(dep. on........................
%soil con.) %
30........................
30 %30 30 30 30
2/50A)
(BVP12/50A)
3rt guide
Comforthandle Drive
guide handle Drive Drive
0/30)(BVP10/30)Engine manufacturer Engine manufacturer ................................................
................................................
Engine manufacturer Honda Honda
................................................ Honda Honda Honda Honda
0,136 Type .........................................................................
Type .........................................................................
GXR 120
Type ......................................................................... GXR GX 120GXR 120GX 120 GX 120
120
Emission stage Emission
.........................................................
Emission
stage StageV/CARB P.3
stage .........................................................
......................................................... StageV/CARB StageV/CARB
StageV/CARB P.3 P.3 P.3 StageV/CARB
StageV/CARB P.3 P.3
0,167 Cooling ..................................................................... air
Cooling .....................................................................
Cooling ..................................................................... air air air air air
Number of cylinders Number .................................................
of Number 1
cylindersof.................................................
cylinders ................................................. 1 1 1 1 1
Performance SAE J 1349 ........................................
Performance Performance
SAE J 1349SAE kW 2,1
J 1349 ........................................
........................................ kW 2,6
2,1kW 2,1 2,6 2,6
Speed ....................................................................... min-1 3.600 min-1 3.600
Speed .......................................................................
Speed ....................................................................... 3.600 3.600 3.600
min-1 3.600
Drive system ............................................................
Drive system Drive mech.
system ............................................................
............................................................ mech.mech. mech. mech. mech.
Fuel .......................................................................... Gasoline
Fuel ..........................................................................
Fuel .......................................................................... Gasoline GasolineGasoline Gasoline
Gasoline
Fuel comsump. Fuel aver.comsump.
during Fueloperation
comsump. ....................
aver. during aver. during
operation l/h....................
operation0,6 ....................
l/h 0,9
0,6l/h 0,6 0,9 0,9
ng bow,
Exciter systemExciter system Exciter system
Frequency Frequency
................................................................
Frequency ................................................................ Hz 100 Hz
................................................................ 94
100Hz 100 94 94
dle
Dimensions in mm Centrifugal
Centrifugal forceCentrifugal force .......................................................
....................................................... kN 10 kN
force ....................................................... 12
10 kN 10 12 12
e plate Amplitude .................................................................
Amplitude ................................................................. mm 1,34 mm
Amplitude ................................................................. 1,341,10
mm 1,34 1,10 1,10
w oil H H1 H2 L L1 W
Capacities CapacitiesCapacities
BP
Fuel10/35 658Fuel962 700 1084 532 350
Fuel ..........................................................................
..........................................................................
..........................................................................
l 0,8 l 0,8l2,0 0,8 2,0 2,0
Water .......................................................................
Water ....................................................................... l
Water .......................................................................
l - - l7,0 - 7,0 7,0
BP 12/40
Technical modifications reserved.
658Technical
TechnicalMachines
modifications
962
may reserved.
be shown
700reserved.
modifications
Machines
1084
with options.
542
may beMachines
shown with
may
400
options.
be shown with options.
11
Shipping dimensions in m3
BVP 10/36 0,146
BVP 10/36
Vibration insulated steering bow,
foldable
Detachable steering handle
Dimensions in mm
Highly wear resistant base plate
Automatic shutdown at low oil
level BVP 10/36
Recoil starter
Single point lifting device
Fully protected V-belt
Carrying handles
Technical Data
3-2-1 Warranty
Optional Equipment
Weights
Sprinkler system (+7kg) Operating weight C
Transport wheels (+4kg) Basic weight ..........
Plastic mat
Tool kit Dimensions
Service Kit Working width .......
TOUGH WARRANTY Driving Characteri
Comfort guide handle Working speed, ma
Special painting Max. gradeability (d
Engine protection frame
Drive
Engine manufacture
Type ......................
Emission stage ......
Cooling ..................
Number of cylinders
Performance SAE J
Speed ....................
Drive system .........
Fuel .......................
Fuel comsump. ave
Exciter system
Frequency .............
Centrifugal force ....
Amplitude ..............
Capacities
Fuel .......................
Fields of application: Water ....................
Technical modifications reserve
Earthwork, asphalt and paving applications.
Repair work on roads and agricultural roads, pipe-
line and trench construction, landscape gardening.
Standard Equipment
Light Equipment
rotected V-belt
ng handles
Warranty TECHNICAL DATA
Technical DataTechnical Data BOMAG BOMAG
BVP 10/36 BVP 10/36
Equipment
Weights Weights
g)
er system (+7kg)Operating weight Operating
CECE ........................................... 83
weight CECE ...........................................
kg kg 83
port
g) wheels (+4kg)Basic weight .............................................................
Basic weight .............................................................
kg 82 kg 82
mat
t Dimensions Dimensions
e Kit Working width ..........................................................
Working width .......................................................... mm 360 mm 360
H WARRANTY Driving Characteristics Driving Characteristics
rt guide handle Working speed,Working speed, max. ...............................................
max. ............................................... m/min 25 m/min 25
l painting Max. gradeability (dep.
Max. on soil con.)
gradeability (dep......................... % 30
on soil con.) ........................ % 30
me
e protection frame
3 Drive Drive
Engine manufacturer Engine................................................
manufacturer ................................................
Honda Honda
0,136 Type .........................................................................
Type .........................................................................
GX 120 GX 120
Emission stage Emission stage .........................................................
......................................................... StageV/CARB P.3 StageV/CARB P.3
0,167 Cooling .....................................................................
Cooling .....................................................................
air air
Number of cylinders Number of cylinders .................................................
................................................. 1 1
Performance SAE Performance
J 1349 ........................................ kW
SAE J 1349 ........................................
2,6 kW 2,6
min-1 3.600 min-1 3.600
Speed .......................................................................
Speed .......................................................................
Drive system ............................................................
Drive system ............................................................ mech. mech.
Fuel ..........................................................................
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump.Fuel aver.comsump.
during operation
aver. during operationl/h....................
.................... 0,9 l/h 0,9
ng bow,
Exciter systemExciter system
Frequency ................................................................
Frequency ................................................................ Hz 90 Hz 90
dle Centrifugal forceCentrifugal 10
Dimensions in mm force .......................................................
....................................................... kN 10 kN
e plate Amplitude .................................................................
Amplitude ................................................................. mm 1,00 mm 1,00
w oil H H1 H2 L L1 W
Capacities Capacities
Fuel10/35
BP Fuel ..........................................................................
..........................................................................
658 962 700 1084 532 l 3502,0 l 2,0
Water .......................................................................
Water ....................................................................... l 7,0 l 7,0
BP 12/40
Technical modifications reserved.
658may reserved.
TechnicalMachines
modifications
962 700 may1084
be shownMachines
with options.
542 400
be shown with options.
13
Shipping dimensions in m3
BVP 18/45 0,149
BVP 18/45 D 0,181
Standard Equipment
Light Equipment
rotected
FullyV-belt
protected V-belt
ng handles
Warranty
Carrying handles
3-2-1 Warranty
TECHNICAL DATA
Technical DataTechnical Data Technical Data BOMAG BOMAG BOMAG BOMAGBOMAG BOMAG
meprotection
Engineframeprotection frame BVP 18/45 BVPBVP 18/45
18/45
BVPD18/45
BVP 18/45 BVP
D 18/45 D
8/45D) (BVP18/45D)
atic
siondecompression
Automatic decompression
Weights Weights Weights
8/45D) (BVP18/45D) Operating weight Operating weight
CECE ...........................................
Operating CECE ...........................................
weight CECE ...........................................
kg 91 kg 91 kg 104 91 104 104
Basic weight 90
.............................................................
Basic weight .............................................................
Basic kg
weight .............................................................
kg 90 kg 103 90 103 103
Equipment
Optional Equipment
Dimensions Dimensions Dimensions
g)
er system
Sprinkler(+7kg)Working
system (+7kg) Working width ..........................................................
Working width ..........................................................
width .......................................................... mm 450 mm 450mm 450 450 450 450
kg)
ort wheels
Transport (+4kg)
wheels
Driving(+4kg) Driving Characteristics
Characteristics Driving Characteristics
mat Plastic mat Working speed,Working speed,
max. ...............................................
Working max.speed,
...............................................
max. ...............................................
m/min 25 m/min 25 m/min 25 25 25 25
t Tool kit Max. gradeability Max.(dep.gradeability
on Max.
soil con.) (dep.
gradeabilityon soil(dep.con.)on........................
........................ %soil con.) %
30........................
30 % 30 30 30 30
e Kit Service Kit
3H WARRANTY
TOUGH WARRANTY Drive Drive Drive
rt guide
Comfort
handle Engine
guide manufacturer
handle Engine................................................
manufacturer ................................................
Engine manufacturer Honda Honda
................................................ Hatz Honda Hatz Hatz
l painting 0,136
Special painting Type .........................................................................
Type ......................................................................... GX 160
Type ......................................................................... GX 1601B20 GX 160 1B20 1B20
meprotection
Engine frameEmission
protection stageEmission
frame stage
.........................................................
Emission.........................................................
StageV/CARB P.3
stage ......................................................... Stage VStageV/CARB
StageV/CARB P.3 Stage VP.3 Stage V
0,167
8/45)(BVP18/45) Cooling Cooling .....................................................................
.....................................................................
Cooling air air
..................................................................... air air air air
Number of cylinders Number of cylinders
Number of.................................................
................................................. 1
cylinders ................................................. 1 1 1 1 1
Performance SAE Performance SAE J 1349SAE kW
........................................
J 1349 ........................................
Performance 3,6 kW
J 1349 ........................................ 3,6 kW3,1 3,6 3,1 3,1
Speed .......................................................................
Speed ....................................................................... min-1 3.600 min-1 3.600
Speed ....................................................................... 3.000 3.600 3.000
min-1 3.000
Drive system ............................................................
Drive system ............................................................
Drive mech.
system ............................................................ mech. mech. mech. mech. mech.
Fuel ..........................................................................
Fuel .......................................................................... Gasoline
Fuel .......................................................................... Diesel GasolineDiesel
Gasoline Diesel
Fuel comsump.Fuel aver.comsump.
during Fuel aver.
operation
comsump.during operation
....................
aver. during l/h
....................
operation l/h 0,7
1,1 l/h
1,1 .................... 1,1 0,7 0,7
ng bow,
Exciter systemExciter system Exciter system
dle Frequency Frequency
................................................................
Frequency ................................................................ Hz 90 Hz
................................................................ 90
90 Hz 90 90 90
Dimensions
Centrifugal force in mm Centrifugal
Centrifugal force .......................................................
....................................................... kN 18 kN 18 kN
force ....................................................... 18 18 18 18
e plate Amplitude .................................................................
Amplitude ................................................................. mm 1,63 mm
Amplitude ................................................................. 1,63
1,63mm 1,63 1,63 1,63
w oil H H1 H2 L L1 W
Capacities CapacitiesCapacities
BP
Fuel10/35 658Fuel962 700 1084 532 350
Fuel ..........................................................................
..........................................................................
..........................................................................
l 3,1 l 3,1 l3,0 3,1 3,0 3,0
Water .......................................................................
Water ....................................................................... l
Water .......................................................................
l 7,0 7,0 l7,0 7,0 7,0 7,0
BP 12/40
Technical modifications reserved.
658Technical
Technical Machines
modifications
962
mayreserved.
be shown
700reserved.
modifications
Machines
1084
with options.
542
may be Machines
shown with
may
400
options.
be shown with options.
15
Shipping dimensions in m3
BPS 18/45 0,240
BPS 18/45
Vibration insulated steering bow,
foldable
Engine protection frame
Dimensions in mm
Highly wear resistant base plate
Automatic shutdown at low oil H
level BPS 18/45 5
Recoil starter
Single point lifting device
Fully protected V-belt
Carrying handles
Technical Data
Optional Equipment
Standard Equipment
Light Equipment
otected V-belt
g handles
TECHNICAL DATA
Technical Data
Technical Data BOMAG BOMAG
Equipment BPS 18/45 BPS 18/45
er system Weights Weights
ort wheels Basic weight ............................................................. 84
Basic weight .............................................................
kg kg 84
Operating weight
Operating
CECE (W) weight.................................... 86
CECE (W) ....................................
kg kg 86
Kit
Dimensions Dimensions
Working width Working
(W) ....................................................
width (W) ....................................................
mm 450 mm 450
Driving Characteristics
Driving Characteristics
Working
Working speed, speed, max. ...............................................
max. ............................................... m/min 25 m/min 25
Max.
Max. gradeability gradeability
(dep. on soil con.)(dep.........................
on soil con.) ........................
% 30 % 30
3 Drive Drive
Type ......................................................................... 168 F-C
Type ......................................................................... 168 F-C
0,136 Emission stageEmission
......................................................... China 3
stage ......................................................... China 3
0,167 Cooling .....................................................................
Number of cylinders
Number .................................................
air
Cooling .....................................................................
1
of cylinders .................................................
air
1
Performance SAE Performance
J 1349 ........................................ kW 3,1
SAE J 1349 ........................................ kW 3,1
Speed ....................................................................... min-1 3.600 min-1 3.600
Speed .......................................................................
Drive system ............................................................ mech.
Drive system ............................................................ mech.
Fuel .......................................................................... gasoline
Fuel .......................................................................... gasoline
Fuel comsump.Fuel aver.comsump.
during operation
aver. during operation l/h
.................... 1,0
.................... l/h 1,0
ng bow, Exciter system Exciter system
Frequency ................................................................ Hz
Frequency ................................................................
90 Hz 90
dle Centrifugal force
Centrifugal
....................................................... kN
force .......................................................
18 kN 18
Dimensions in mm .................................................................
Amplitude .................................................................
Amplitude mm 1,10 mm 1,10
e plate
w oil Capacities Capacities H H1 H2 L L1 W
Fuel ..........................................................................
Fuel ..........................................................................
l 4,0 l 4,0
BP 10/35
Water 658 962 700 1084 532
....................................................................... 350
Water .......................................................................
l 13,0 l 13,0
Technical modificationsTechnical
reserved.modifications
Machines may reserved.
be shownMachines
with options.
may be shown with options.
BP 12/40 658 962 700 1084 542 400
17
Shipping dimensions in m3
BP 10/35 0,136
BP 12/40 0,167
BP 10/35, BP 12/40
Vibration insulated steering bow,
foldable
Detachable steering handle
Dimensions in mm
Highly wear resistant base plate
Automatic shutdown at low oil H
level BP 10/35 6
Recoil starter BP 12/40 6
Fully protected V-belt
Carrying handles
Single point lifting device
Technical Data
Protective covering
3-2-1 Warranty
Engine protection frame
Weights
Optional Equipment Operating weight CE
Basic weight ...........
Sprinkler system (+10kg)
Sprinkler system 6l Dimensions
(+4kg/BP10/35) Working width ........
Transport wheels (+4kg) Driving Characteris
Plastic mat Working speed, max
Tool kit Max. gradeability (d
Special painting
Service Kit Drive
TOUGH WARRANTY Engine manufacture
Comfort guide handle Type .......................
Emission stage ......
Cooling ...................
Number of cylinders
Performance SAE J
Speed ....................
Drive system ..........
Fuel ........................
Fuel comsump. ave
Exciter system
Frequency ..............
Centrifugal force ....
Amplitude ...............
Capacities
Fuel ........................
Fields of application: Water .....................
Technical modifications reserve
Earthwork, asphalt and paving applications.
Repair work on roads and agricultural roads, pipe-
line and trench construction, landscape gardening.
Standard Equipment
Light Equipment
g handles
Carrying handles
point
ice Single
lifting point
ive covering
TECHNICAL DATA
devicelifting device
Technical DataTechnical Data
Protective covering
Technical Data BOMAG BOMAG BOMAG BOMAGBOMAG BOMAG
Warranty
3-2-1 Warranty BP 10/35 BP 10/35
BP 12/40
BP 10/35BP 12/40 BP 12/40
me protection
Engineframeprotection frame
Weights Weights Weights
Equipment
Optional Equipment Operating weight Operating weight
CECE ...........................................
Operating CECE weight kg 65
........................................... kg
CECE ........................................... 65 kg 72 65 72 72
Basic weight
Basic weight .............................................................
Basic kg 64
............................................................. kg
weight ............................................................. 64 kg 71 64 71 71
er
kg)system
Sprinkler
(+10kg)
system (+10kg)
er system
Sprinkler Dimensions
6l system 6l Dimensions Dimensions
BP10/35)
(+4kg/BP10/35) Working width ..........................................................
Working width ..........................................................
Working mm 350 mm
width .......................................................... 350mm 400 350 400 400
kg)
ort wheels
Transport(+4kg)
wheels
Driving (+4kg)
Characteristics
Driving Characteristics
Driving Characteristics
mat Plastic mat Working speed,Working max. ...............................................
speed,
Working max.speed,
...............................................
max. ...............................................
m/min 25 m/min 25 m/min 25 25 25 25
Tool kit Max. gradeability Max.(dep.
gradeability
on Max.
soil con.) (dep. ........................
gradeabilityon soil(dep.
con.)on........................
soil
% con.) %
30........................
30 % 30 30 30 30
l painting
Special painting
3 Kit Service Kit Drive
e Drive Drive
H WARRANTY
TOUGH WARRANTY Engine manufacturer Engine................................................
manufacturer ................................................
Engine manufacturer Honda Honda
................................................ Honda Honda Honda Honda
rt guide 0,136
Comfort
handle Type
guide .........................................................................
handle Type .........................................................................
GX 120
Type ......................................................................... GX 120GX 120GX 120 GX 120 GX 120
StageV/CARB
P.3 StageV/CARB P.3 P.3 StageV/CARB
0,167 Emission stageEmission
.........................................................
stage
Emission.........................................................
Cooling .....................................................................
StageV/CARB StageV/CARB
stage .........................................................
Cooling .....................................................................
air
Cooling ..................................................................... air air air
P.3 StageV/CARB
air air
P.3 P.3
Number of cylinders Number .................................................
of cylinders
Number of .................................................
1
cylinders ................................................. 1 1 1 1 1
Performance SAE Performance
J 1349 ........................................
SAE J 1349SAE
Performance ........................................ kW
J 1349 ........................................
kW 2,6 2,6 kW2,6 2,6 2,6 2,6
Speed ....................................................................... min-1 3.600 min-1 3.600
Speed .......................................................................
Speed ....................................................................... 3.600 3.600 3.600
min-1 3.600
Drive system ............................................................
Drive system ............................................................
Drive mech.
system ............................................................ mech. mech. mech. mech. mech.
Fuel ..........................................................................
Fuel ..........................................................................
Gasoline
Fuel ..........................................................................Gasoline GasolineGasoline Gasoline
Gasoline
Fuel comsump.Fuel aver. comsump.
during Fueloperation
aver.
comsump. during
....................
operation
aver. during ....................
l/hoperation l/h 0,9
0,9 l/h
0,9 .................... 0,9 0,9 0,9
ng bow,
Exciter systemExciter system Exciter system
dle Frequency ................................................................
Frequency ................................................................
Hz 90 Hz 90 Hz
Frequency ................................................................ 90 90 90 90
Dimensions
Centrifugal force in mm Centrifugal
.......................................................
Centrifugal force .......................................................
kN 10 kN 10 kN
force ....................................................... 12 10 12 12
e plate Amplitude ................................................................. mm 1,33 mm
Amplitude .................................................................
Amplitude ................................................................. 1,42 1,33
1,33mm 1,42 1,42
w oil H H1 H2 L L1 W
Capacities CapacitiesCapacities
BP
Fuel10/35 658 Fuel962 700 1084 532
.......................................................................... 350
Fuel ..........................................................................
..........................................................................
l 2,0 l 2,0 l 2,0 2,0 2,0 2,0
Water .......................................................................
Water .......................................................................
13,5 l
Water .......................................................................
l 13,5l 13,5 13,5 13,5 13,5
BP 12/40
Technical modifications Technical
658
reserved. modifications
Machines
962
Technical
mayreserved.
700reserved.
be modifications
shownMachines
1084
with options.
542options.
may be Machines
shown withmay
400
be shown with options.
19
Shipping dimensions in m3
BP 12/50 A 0,195
BP 12/50 A
Highly wear resistant special
base plate
Sprinkler system
Dimensions in mm
Vibration insulated steering bow,
foldable H
Detachable steering handle BP 12/50 A 6
Automatic shutdown at low oil
level
Recoil starter
Reinforced centrifugal clutch
Technical Data
Single point lifting device
Fully protected V-belt
Carrying handles
3-2-1 Warranty Weights
Operating weight CE
Optional Equipment Basic weight ..........
Standard Equipment
Light Equipment
starter
rced
clutch
ice
TECHNICAL DATA
centrifugal clutch
Technical DataTechnical Data
point lifting device BOMAG BOMAG
rotected V-belt BP 12/50 A BP 12/50 A
ng handles
Warranty Weights Weights
Operating weightOperating
CECE ...........................................
weight CECE ...........................................
kg 82 kg 82
Equipment Basic weight .............................................................
Basic weight .............................................................
kg 74 kg 74
21
Shipping dimensions in m3
BP 20/50 0,236
BP 20/50 D 0,245
Standard Equipment
Light Equipment
point
ice Single
lifting point
device lifting device
rotected
FullyV-belt
g handles
Carrying handles
TECHNICAL DATA
protected V-belt
Technical DataTechnical Data Technical Data BOMAG BOMAG BOMAG BOMAGBOMAG BOMAG
ive covering
Protective covering BP 20/50 BP 20/50
BP 20/50
BP D20/50BP 20/50 DBP 20/50 D
Warranty
3-2-1 Warranty
mpression
utomatic
Fullydecompression
automatic decompression
Weights Weights Weights
50D)(BP20/50D)Operating weight Operating weight
Operating CECE 95
...........................................
weight
CECE ........................................... kg
CECE ...........................................
kg 95 kg 109 95 109 109
Basic weight 94
.............................................................
Basic kg
weight .............................................................
Basic weight ............................................................. kg 94 kg 108 94 108 108
Equipment
Optional Equipment
Dimensions Dimensions Dimensions
er
kg)system
Sprinkler(+10kg) Working
system (+10kg) Working width ..........................................................
Working width ..........................................................
width .......................................................... mm 500 mm 500mm 500 500 500 500
kg)
ort wheels
Transport (+4kg)
wheels
Driving (+4kg) Driving Characteristics
Characteristics Driving Characteristics
mat Plastic mat Working speed,Working speed,
Working max. ...............................................
speed, max. ...............................................
max. ............................................... m/min 30 m/min 30 m/min 30 30 30 30
Tool kit Max. gradeability Max. gradeability
(dep. onMax.soil con.)(dep. on soil con.)on........................
........................
gradeability (dep. %
% con.)30........................
soil 30 %30 30 30 30
l painting
Special painting
3 Kit Service Kit Drive
e Drive Drive
e-position
g handle
Steering Engine
centre-position
handle manufacturer
centre-position Engine manufacturer
Engine................................................
manufacturer ................................................
................................................
Honda Honda Hatz Honda Hatz Hatz
0,136 Type .........................................................................
50) (BP20/50) Type .........................................................................
Type .........................................................................
GX 160 GX 1601B20 GX 160 1B20 1B20
H WARRANTY
TOUGH Emission stageEmission Emission stage .........................................................
.........................................................
stage StageV/CARB StageV/CARB
......................................................... P.3 Stage V StageV/CARB P.3 Stage V
P.3 Stage V
0,167WARRANTY
Cooling .....................................................................
Cooling Cooling .....................................................................
air
..................................................................... air air air air air
rt guide
Comfort
handle guide handle
handle
comfort
Central guide Number
comfort
handle guideof handle
cylinders
Number of Number
cylindersof.................................................
cylinders .................................................
................................................. 1 1 1 1 1 1
50) (BP20/50) Performance SAE J 1349
Performance Performance SAE J 1349
........................................
SAE J 1349 kW
........................................
3,6
........................................ kW 3,6 3,1
kW 3,6 3,1 3,1
min-1 3.600 min-1 3.600
Speed .......................................................................
Speed .......................................................................
Speed ....................................................................... 3.000 3.600 3.000
min-1 3.000
Drive system Drive system ............................................................
Drive system ............................................................ mech.
............................................................ mech. mech. mech. mech. mech.
Fuel ..........................................................................
Fuel .......................................................................... Gasoline
Fuel .......................................................................... Diesel GasolineDiesel
Gasoline Diesel
Fuel comsump.Fuel aver. during
comsump. Fueloperation
comsump.
aver. ....................
during aver. during
operation l/hoperation
.................... l/h 0,7
1,1 l/h
1,1 .................... 1,1 0,7 0,7
ng bow,
Exciter systemExciter system Exciter system
dle Frequency Frequency ................................................................
................................................................
Frequency ................................................................ Hz 90 Hz 90 Hz
90 90 90 90
Dimensions
Centrifugal force in mm Centrifugal
Centrifugal force .......................................................
....................................................... kN 20 kN 20 kN
force ....................................................... 20 20 20 20
e plate Amplitude .................................................................
Amplitude ................................................................. mm 1,70 mm
Amplitude ................................................................. 1,70 1,70
1,70mm 1,70 1,70
w oil H H1 H2 L L1 W
Capacities CapacitiesCapacities
BP
Fuel10/35 658 Fuel 962 700 1084 532 350
..........................................................................
Fuel ..........................................................................
.......................................................................... l 3,1 l 3,1 l 3,0 3,1 3,0 3,0
Water .......................................................................
Water .......................................................................
Water ....................................................................... l 13,5 l 13,5l 13,5 13,5 13,5 13,5
BP 12/40
Technical modifications Technical
658
reserved. modifications
Machines
962
Technical
mayreserved.
700reserved.
be modifications
shownMachines
1084
with options.
542
may be Machines
shown with
may
400
options.
be shown with options.
23
Shipping dimensions in m3
BP 25/50 0,236
BP 25/50 D 0,245
Standard Equipment
Light Equipment
point
ice Single
lifting point
device lifting device
otected
FullyV-belt
g handles
Carrying handles
TECHNICAL DATA
protected V-belt
Technical DataTechnical Data Technical Data BOMAG BOMAG BOMAG BOMAGBOMAG BOMAG
ive covering
Protective covering BP 25/50 BP 25/50
BP 25/50
BP D25/50BP 25/50 DBP 25/50 D
Warranty
3-2-1 Warranty
atic
t low
shutdown
Automatic
oil atshutdown
low oil at lowWeights
Weights oil Weights
BP25/50)
level (BP25/50) Operating weight Operating weight
Operating CECE 108 kg
...........................................
weight CECE ...........................................
CECE ........................................... kg 108kg 122 108 122 122
Basic weight .............................................................
Basic weight .............................................................
Basic weight ............................................................. kg 107 kg 107kg 123 107 123 123
Equipment
Optional Equipment
Dimensions Dimensions Dimensions
er
kg)system
Sprinkler(+10kg) Working
system (+10kg) Working width Working..........................................................
width ..........................................................
width .......................................................... mm 500 mm 500mm 500 500 500 500
kg)
ort wheels
Transport (+4kg)
wheels
Driving (+4kg) Driving Characteristics
Characteristics Driving Characteristics
mat Plastic mat Working speed,Working speed,
max. ...............................................
Working max. ...............................................
speed, max. ...............................................
m/min 30 m/min 30 m/min 30 30 30 30
painting
Special painting Max. gradeability Max. gradeability
(dep. onMax.
soil con.) (dep.
gradeabilityon soil con.)on........................
........................
(dep. soil %
% con.)30........................ 30 %30 30 30 30
e Kit Service
(BP25/50) Kit (BP25/50)
3
H WARRANTY
TOUGH WARRANTY Drive Drive Drive
t guide
Comfort
handle Engine
guide handlemanufacturer Engine manufacturer ................................................
Engine................................................
manufacturer ................................................
Honda Honda Hatz Honda Hatz Hatz
handle
comfort 0,136
Central guide Typeguide
comfort
handle handle Type .........................................................................
Type .........................................................................
......................................................................... GX 160 GX 1601B20 GX 160 1B20 1B20
P.3 Stage V StageV/CARB P.3 Stage V
0,167 Emission
50) (BP25/50) stageEmission Emission
stage stage .........................................................
.........................................................
......................................................... StageV/CARB StageV/CARB
Cooling .....................................................................
Cooling .....................................................................
Cooling ..................................................................... air air air air
P.3 Stage V
air air
Number of cylinders Number of Number
cylindersof.................................................
cylinders .................................................
................................................. 1 1 1 1 1 1
Performance ISO Performance Performance kW kW
ISO 3046 ............................................
ISO 3046 ............................................
3046 ............................................ 3,6 3,6 kW3,1 3,6 3,1 3,1
min-1 3.600 min-1 3.600
Speed .......................................................................
Speed .......................................................................
Speed ....................................................................... 3.000 3.600 3.000
min-1 3.000
Drive system Drive system ............................................................
............................................................
Drive system ............................................................ mech. mech. mech. mech. mech. mech.
Fuel ..........................................................................
Fuel ..........................................................................
Fuel .......................................................................... Gasoline Diesel GasolineDiesel
Gasoline Diesel
Fuel comsump.Fuel aver. comsump.
duringFuel comsump.
aver.
operation during aver. during
operation
.................... l/hoperation l/h 0,7
1,1 l/h
1,1 ....................
.................... 1,1 0,7 0,7
ng bow,
Exciter systemExciter system Exciter system
dle Frequency Frequency ................................................................
................................................................
Frequency ................................................................ Hz 92 Hz 92 Hz
92 92 92 92
Dimensions
Centrifugal force in mm Centrifugal
Centrifugal force .......................................................
....................................................... kN 25 kN 25 kN
force ....................................................... 25 25 25 25
e plate Amplitude .................................................................
Amplitude ................................................................. mm 1,75 mm
Amplitude ................................................................. 1,75 1,75
1,75mm 1,75 1,75
w oil H H1 H2 L L1 W
Capacities CapacitiesCapacities
BP
Fuel10/35 658 Fuel 962 700 1084 532 350
..........................................................................
Fuel ..........................................................................
.......................................................................... l 3,1 l 3,1 l 3,0 3,1 3,0 3,0
Water .......................................................................
Water .......................................................................
Water ....................................................................... l 13,5 l 13,5l 13,5 13,5 13,5 13,5
BP 12/40
Technical modifications Technical
658
reserved. modifications
Machines
962
Technical
mayreserved.
700reserved.
bemodifications
shown Machines
1084
with options.
542
may be Machines
shown with
may
400
options.
be shown with options.
25
Shipping dimensions in m3
BPR 25/40 0,385
BPR 25/40 D 0,432
Standard Equipment
Light Equipment
r-coated
powder-coated
base plate base plate
late
rotected
FullyV-belt
starter
protected
Recoil starter
TECHNICAL DATA
V-belt Data
Technical
Technical TechnicalData Data
BOMAG
BOMAG BOMAGBOMAG BOMAG
BOMAG
BPR 25/40BPR 25/40 BPR 25/40BPR
D 25/40 D
up drive
Back-up
protection
drive protection BPR 25/40 BPR 25/40 D
on
atic Automatic
shutdown at shutdown
low oil at low Weights
oil Weights
t lowlevel
oil (BPR25/40)
BPR25/40) Weights Operating weight Operating CECE weight (W) CECE
.................................... kg
(W) .................................... 135kg 135 150 150
atic Automatic
decompression Operating weight
decompression CECE
Basic (W)
weight ....................................
.............................................................
Basic kg 135 kg
weight ............................................................. 132kg150 132 147 147
sion
5/40D)
(BPR25/40D) Basic weight ............................................................. kg 132 147
Warranty
3-2-1 Warranty Dimensions Dimensions
Dimensions Basic working Basic width .................................................
working mm
width ................................................. 400mm 400 400 400
Equipment
Optional Equipment Basic working width Lowest .................................................
passing
Lowest height
passing mm 400
............................................. mm
height ............................................. 660mm400 660 740 740
Lowest passing Min. height .............................................
height w. steering
Min. height w. in steering
top position mm
in top 660......................
......................
position mm 930mm740 930 930 930
Min. height w. steering
Max. height in top w.position
Max. height......................
steering in steering
w. top position mm
in top 930 .....................
.....................
position mm mm
1.250930 1.250 1.250 1.250
ler system
Sprinkler(+13kg)
system (+13kg)
Max. height w. steering in top position ..................... mm 1.250 1.250
kg)
t Tool kit Driving Characteristics
Driving Characteristics
al painting Driving Characteristics
Special painting Working speed, Working max. ...............................................
speed, m/min 25 m/min 25
max. ............................................... 25 25
3matPlastic mat Working speed,Max. max.gradeability
...............................................
(dep. on soil
Max. gradeability con.)
(dep. m/min 25........................
on........................
soil con.) % 30 % 25 30 30 30
port wheels, Max.
Transport wheels, gradeability (dep. on soil con.) ........................ % 30 30
ure-proof 0,136
puncture-proof
(+4kg) Drive (+4kg) Drive Drive
e KitService Kit Engine manufacturer Engine manufacturer ................................................
Engine manufacturer Honda
................................................ Honda Hatz Hatz
0,167 ................................................ Honda GX Hatz
160 GX 160 1B20
rsionUS EPA Version
4 NRTC 4 NRTC Type .........................................................................
Type .........................................................................
EPA .........................................................................
Type GX 160 1B20
1B20
TC Emission stage Emission .........................................................
stage ......................................................... StageV/CARB StageV/CARB
P.3 Stage P.3
V Stage V
5/40D)
(BPR25/40D) Emission stage Cooling......................................................... StageV/CARB P.3
.....................................................................
Cooling ..................................................................... air Stage Vair air air
H WARRANTY
TOUGH WARRANTY Cooling .....................................................................
Number of Number air
cylindersof.................................................
cylinders ................................................. 1 air 1 1 1
Number of cylinders .................................................
Performance SAE J 1349
Performance SAE 1
........................................ kW
J 1349 ........................................ 3,6kW1 3,6 3,1 3,1
Performance SAE SpeedJ 1349 ........................................ kW 3,6
....................................................................... min-1 3.600
Speed ....................................................................... 3,1
min-1 3.600 3.000 3.000
Speed .......................................................................
Drive system Drive min-1 3.600
............................................................
system ............................................................ mech. 3.000 mech. mech. mech.
ng bow, Drive system ............................................................ mech.
Fuel ..........................................................................
Fuel .......................................................................... mech. GasolineDiesel
Gasoline Diesel
Fuel ..........................................................................
Fuel comsump. aver. during
Fuel comsump. operation
aver. Gasoline
during....................
operation l/h Diesel 1,1
1,1l/h
.................... 0,7 0,7
dle Fuel comsump. aver. during operation .................... l/h 1,1 0,7
Dimensions Exciter
in mm system
Exciter system
e plate Exciter systemFrequencyFrequency ................................................................ Hz 85 Hz
................................................................ 85 85 85
w oil H Centrifugal
force H1 H2 L
Frequency ................................................................
Centrifugal L1Hz W85
....................................................... kN
force ....................................................... 25 kN85 25 25 25
Centrifugal forceAmplitude
.......................................................
Amplitude kN 25
................................................................. mm mm
1,55
................................................................. 25 1,55 1,55 1,55
BP 10/35 .................................................................
Amplitude 658 962 700 1084 532 mm 350 1,55 1,55
CapacitiesCapacities
BP 12/40
Capacities 658 Fuel962 700 1084 542 400
Fuel .......................................................................... l
..........................................................................3,1l 3,1 3,0 3,0
Fuel .......................................................................... l 3,1
Water ....................................................................... l
Water ....................................................................... l 3,0
12,0 12,0 12,0 12,0
Water .......................................................................
Technical modifications
Technical
reserved.
modifications
Machines
reserved.
may beMachines
l mayoptions.
shown with
12,0
be shown with options.
12,0
Technical modifications reserved. Machines may be shown with options.
Technical Data BOMAG BOMAG
BP 10/35 BP 12/40
Weights
Operating weight CECE ........................................... kg 65 72
Basic weight ............................................................. kg 64 71
Dimensions
Working width .......................................................... mm 350 400
Driving Characteristics
Working speed, max. ............................................... m/min 25 25
Max. gradeability (dep. on soil con.) ........................ % 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage .........................................................
BOMAG BOMAG StageV/CARB P.3 StageV/CARB P.3
BOMAG Hellerwald Hellerwald
Cooling ..................................................................... air air
Hellerwald D-56154 Boppard
D-56154 Boppard
Number of cylinders D-56154 .................................................
Boppard P.O. Box 5162P.O. Box 5162 1 1
Performance SAE P.O. JBox1349 (0)6742 - 1000 kW
5162........................................
Tel. (0)6742 Tel.
- 1000 2,6 2,6
Tel. (0)6742 - 1000 (0)6742 - 3090 min-1
Speed .......................................................................
Fax (0)6742 Fax- 3090 3.600 3.600
Fax (0)6742 - 3090
Drive system ............................................................ mech. mech.
65PRE
010 692 65 010 040219 Sa03 040219 Sa03
Fuel .......................................................................... Gasoline Gasoline
040219 Sa03
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
27
Shipping dimensions in m3
BPR 25/50 0,420
BPR 25/50 D 0,471
Standard Equipment
Light Equipment
wear-resistant,
Highly wear-resistant,
r-coated
late powder-coated
rotected
FullyV-belt
TECHNICAL DATA
base plate base plate
Technical DataTechnical Technical
protected V-belt
Data Data BOMAG BOMAGBOMAG BOMAGBOMAG BOMAG
sion
atic decompression
Automatic decompression BPR 25/50 BPR BPR
25/50
25/50
BPRD25/50BPR 25/50BPR
D 25/50 D
5/50D)(BPR25/50D)
atic
t lowshutdown
Automatic
oil at
shutdown
low oil at lowWeights
Weights oil Weights
BPR25/50) Operating weight
level (BPR25/50) Operating
CECE (W) weight
....................................
Operating CECE weight(W) CECE
....................................
(W)kg ....................................
140 kg 155
140kg 140 155 155
starter
Recoil starterBasic weight .............................................................
Basic weight Basic kg 137
............................................................. kg
weight ............................................................. 152
137kg 137 152 152
up
on drive
Back-up
protection
drive protection
Warranty
3-2-1 WarrantyDimensions Dimensions Dimensions
Basic working width Basic.................................................
workingBasic width .................................................
working mm 500 mm
width ................................................. 500
500mm 500 500 500
Equipment Lowest passingLowest
Optional Equipment height .............................................
passing
Lowest height
passing .............................................
mm 660 mm
height ............................................. 740
660mm 660 740 740
Min. height w. steering
Min. height in topw.position
Min. height ......................
steering in steering
w. top position ......................
mm
in top mm
930......................
position 930
930mm 930 930 930
Max. height w. steering
Max. height in topw.position
Max. height .....................
steering in steering
w. top position mm
in top 1.250
.....................
position mm 1.250
..................... 1.250 1.250 1.250
mm 1.250
kg)
er system
Sprinkler
(+13kg)
system (+13kg)
port wheels,
Transport wheels,
Driving Characteristics
Driving Characteristics
Driving Characteristics
3re-proof (+4kg) Working
puncture-proof (+4kg)speed,Working
max. ...............................................
speed,
Working max. ...............................................
speed, m/min 25 m/min
max. ...............................................
m/min 25 25 25 25 25
t Tool kit Max. gradeability (dep.
Max. on Max.
soil con.)
gradeability ........................
gradeability
(dep. on soil (dep.
con.) on........................
%soil con.) 30........................
% 30 %30 30 30 30
0,136
l painting
Special painting
matPlastic mat Drive Drive Drive
0,167
e Kit Service Kit Engine manufacturer Engine................................................
manufacturer ................................................
Engine manufacturer Honda Honda
................................................ Hatz Honda Hatz Hatz
H WARRANTY
TOUGH WARRANTYType .........................................................................
Type .........................................................................
GX 160
Type ......................................................................... 160 GX 160 1B20
GX 1B20 1B20
Emission stage Emission stage
Emission .........................................................
......................................................... StageV/CARB P.3
stage ......................................................... StageV/CARB P.3 Stage V
Stage VStageV/CARB P.3 Stage V
Cooling .....................................................................
Cooling ..................................................................... air
Cooling ..................................................................... air air air air air
Number of cylinders Number of Number
cylindersof.................................................
................................................. 1
cylinders ................................................. 1 1 1 1 1
Performance ISO Performance ISO 3046 ............................................
Performance
3046 ............................................ kW 3,6 kW
ISO 3046 ............................................ 3,6kW
3,1 3,6 3,1 3,1
Speed .......................................................................
Speed .......................................................................
Speed ....................................................................... min-1 3.600 min-1 3.600 3.000 3.600 3.000
min-1 3.000
ng bow, Drive system Drive............................................................
Drive system ............................................................ mech.
system ............................................................ mech.mech. mech. mech. mech.
Fuel ..........................................................................
Fuel .......................................................................... Gasoline
Fuel .......................................................................... Diesel GasolineDiesel
Gasoline Diesel
dle Fuel comsump. Fuel aver.comsump.
during Fuel aver. during
comsump.
operation operation
aver. during
.................... l/h....................
operation l/h
1,1 .................... 1,1l/h
0,7 1,1 0,7 0,7
Dimensions in mm
e plate Exciter systemExciter system Exciter system
w oil Frequency H FrequencyH1 ................................................................
H2 L L1
Hz W85
................................................................
Frequency ................................................................ Hz 85 Hz
85 85 85 85
Centrifugal forceCentrifugal force .......................................................
.......................................................
Centrifugal kN 25 kN 25 kN
force ....................................................... 25 25 25 25
BP 10/35 .................................................................
Amplitude Amplitude 658 962 .................................................................
Amplitude 700 1084 532 mm 350 1,31 mm
................................................................. 1,311,31
mm 1,31 1,31 1,31
BP 12/40
Capacities Capacities 658 962 700 1084 542 400
Capacities
Fuel ..........................................................................
Fuel .......................................................................... l 3,1l3,0
Fuel ..........................................................................
l 3,1 3,1 3,0 3,0
Water .......................................................................
Water ....................................................................... l 12,0 l 12,0
Water ....................................................................... l12,0 12,0 12,0 12,0
Technical modifications reserved.
TechnicalMachines
modifications
Technical
may reserved.
be shown
modifications
Machines
with options.
reserved.
may beMachines
shown with
mayoptions.
be shown with options.
Technical Data BOMAG BOMAG
BP 10/35 BP 12/40
Weights
Operating weight CECE ........................................... kg 65 72
Basic weight ............................................................. kg 64 71
Dimensions
Working width .......................................................... mm 350 400
Driving Characteristics
Working speed, max. ............................................... m/min 25 25
Max. gradeability (dep. on soil con.) ........................ % 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
BOMAG BOMAG BOMAG
Cooling ..................................................................... air air
Hellerwald Hellerwald Hellerwald
Number of cylinders D-56154 .................................................
Boppard D-56154 Boppard
D-56154 Boppard 1 1
Performance SAE P.O. JBox1349
5162........................................
P.O. Box 5162P.O. Box 5162 kW 2,6 2,6
Tel. (0)6742 - 1000 Tel. (0)6742 Tel. (0)6742 - 1000 min-1
Speed .......................................................................
- 1000 3.600 3.600
Fax (0)6742 - 3090 Fax (0)6742 Fax- 3090
(0)6742 - 3090
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
52 PRE
010 692 52040219
010 Sa03 040219 Sa03040219 Sa03
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
29
Shipping dimensions in m3
BPR 35/42 D 0,425
BPR 35/60 0,556
BPR 35/60 D 0,607
Light Equipment
BPRHighly
35/60 D
Highly wear-resistant, Highly720
wear-resistant, 1020 BPR
wear-resistant, 115035/601405DBPR762 35/60600 720BPR
D 1020 35/601150
720
D 1405
1020720 762
11501020 600
14051150 762 1405 600 762 600
late powder-coated
TECHNICAL DATA
powder-coated
Fully protected
base plate
Technical Data
FullyV-belt
powder-coated
protected
base platebase plate
Fully protected
V-belt
Technical Data
V-belt
Technical
BOMAG Technical
Data DataBOMAG BOMAG BOMAG BOMAGBOMAG BOMAG BOMAGBOMAG BOMAG BOMAG BOMAG
sion Automatic decompression
AutomaticAutomatic
decompression decompression BPR 35/42 D BPR 35/60BPR 35/42 BPRBPR
D 35/60
35/42
BPR
D
BPRD35/60 BPR
35/42 D 35/60
BPR 35/60BPR
BPR35/60 D 35/60BPR
D 35/60 D
60D) (BPR35/42D, (BPR35/42D,
BPR35/60D) (BPR35/42D,
BPR35/60D) BPR35/60D)
Recoil starter
Recoil starter
Weights Recoil starter Weights Weights Weights
on Back-upOperating
drive
Back-up weight
protection
drive CECE
Back-upprotection
drive Operatingkgweight
(W)protection
............. Operating210
CECE weight
Operating CECE
(W) .............
weight205
(W)CECE
kg............. kg 225
210 .............
(W) 210kg 205 210 205 225
205 225 225
t low oil AutomaticBasic weight at
shutdown
Automatic ......................................
Automatic
shutdown at lowBasic
low oil shutdown oil atweightkgoil
low Basic 207
weight
......................................
Basic 202kg 207 kg 222
......................................
weight ...................................... 207kg 202 207 202 222
202 222 222
level level level
Dimensions
(BPR35/60) (BPR35/60) (BPR35/60) Dimensions Dimensions Dimensions
Basic
3-2-1 Warranty working
3-2-1 Warranty widthWarranty
3-2-1 ...........................
Basic working mm Basicwidth working
420 Basicwidth 600
...........................
working...........................
width mm 420 mm 600 420mm 600
........................... 420 600 600
600 600 600
otectionHour meter Lowest
Hour passing
(Engine meter height
protection
Hour
(Engine
meter .......................
Lowest
protection
(Engine passing
mm
protection Lowest 720passing
height height
.......................
Lowest passing 660 720 mm 720
mm .......................
.......................
height 720mm 660 720 660 720
660 720 720
Min. height w. steering in top position Min. height mm Min. height
w. steering
1.020Min. w. steering
in top position
height topmm
w.in1.020
steering in1.020
position top mmposition1.020 mm 1.020
1.020 1.020 1.020 1.020
1.020 1.020 1.020
hood BPR35/60)
Max.hood
heightBPR35/60)
w.hood BPR35/60)
steering in top Max.
position height
mm Max. height
w. steering
1.120 Max. w.
in topsteering 1.120
w.in
position
height topmm
steering in1.120
position topmm 1.120
position mm 1.120
1.120 1.120 1.120 1.120
1.120 1.120 1.120
Optional Equipment
Optional
Driving Equipment
Optional Equipment
Characteristics Driving Characteristics
Driving Characteristics
Driving Characteristics
3 Working speed, max. ........................ Working speed,m/min
Working max.speed,
27 ........................
Working max. m/min 27 m/min
........................
speed, 27max. 2727 m/min
........................ 2727 27 2727 27 27
Max.
otectionFully closed gradeability
Fully
engine closed (dep.
protection
Fully
engine
closed on soilMax.
protection
enginecon.) gradeability
. %Max. 32
protection (dep.
gradeability
Max. on soil con.)on
(dep.
gradeability . soil
32 % con.)
(dep. on32.soil%con.) 32.32 % 3232 32 3232 32 32
ength 0,136
hood madehood of high-strength
made hood
of high-strength
made of high-strength
Drive
steel (+10kg)steel (+10kg) steel (+10kg) Drive Drive Drive
g) 0,167
TransportEngine
wheels manufacturer
Transport (+5kg)
Transport wheelsEngine
(+5kg) (+5kg)manufacturer
wheels ......................... Engine Hatz .........................
manufacturer
Engine Hatz
Honda .........................
.........................
manufacturer Hatz Honda
Hatz Hatz Honda HatzHonda Hatz Hatz
Electric Type Electric starter+ Type ..................................................
..................................................
starter+
Electric starter+ Type1B20 GX 160 1B20
..................................................
Type .................................................. 1B20 GX
1B20 160
1B20 GX 160 1B20
GX 160 1B20 1B20
Emission stage
Emission stage .................................. Emission..................................
Stage stage
V
Emission StageV/CARB Stage
..................................
stage P.3V Stage Stage
.................................. V VStageV/CARB
Stage V StageV/CARB StageV/CARB
P.3 Stage V StageP.3
P.3 V Stage V
Hour meter Hour
(+20kg) meter Hour
(+20kg)
meter (+20kg)
Cooling ..............................................
Cooling .............................................. Cooling air
air .............................................. air
Cooling .............................................. airair air
air air air
air air air
60D) (BPR35/42D, (BPR35/42D,
Number BPR35/60D) (BPR35/42D,
of cylinders BPR35/60D) BPR35/60D)
Number of cylinders
.......................... Number 1 of ..........................
cylinders
Number 1 1
of ..........................
cylinders 11
.......................... 11 1 11 1 1
Tool kit Performance
Tool kit SAE Tool kit Performance
J 1349 .................. kW SAE J 1349
Performance SAE..................
Performance J 1349 3,6
SAE kW
.................. kW
J 1349 .................. kW 3,6 3,6 3,6
Special Performance
painting
Special paintingSpecial
ISO 3046 painting Performance
..................... kW ISO
Performance
3,13046 .....................
ISO 3046 ISO
Performance kW 3,1 kW 3,13,1kW
.....................
3046 ..................... 3,1 3,1 3,1 3,1
ng bow,Plastic mat Plastic
Speed matPlastic mat Speed ................................................
................................................ Speed
min-1 min-1 3.000
................................................
3.000 3.600 min-13.000
Speed ................................................ min-13.600
3.000 3.000 3.600
3.600 3.000 3.000 3.000
Service Drive
Kit Service
system KitService Kit Drive system
..................................... .....................................
Drive system
mech. Drive system mech. mech. mech.
.....................................
.....................................mech. mech.mech. mech. mech. mech. mech. mech.
0) Hour meter
FuelHour
(BPR35/60)
meter Hour
(BPR35/60)
meter (BPR35/60) Fuel ...................................................
................................................... FuelDiesel Gasoline Diesel Diesel
...................................................
Fuel ................................................... Diesel Gasoline
Diesel GasolineDieselGasoline Diesel Diesel
dle FuelUS-Version
comsump. aver. 4during Fuel
operation comsump.
l/hFuel aver.
comsump.
0,7 during
Fuel operation
aver.
comsump. 1,1
during l/h
aver.operation
during l/h 0,70,7l/h 1,10,7
0,7 operation 1,1 1,1
0,7 0,7 0,7
TC Dimensions
US-Version EPA 4 NRTC in mm
US-Version
EPA NRTC EPA 4 NRTC
e plate(BPR35/60D) (BPR35/60D) (BPR35/60D)
w oil TOUGHExciter WARRANTY
TOUGH system WARRANTY
TOUGH WARRANTY H Exciter H1 H2 system
Exciter
L system Exciter
L1 W system
Frequency .........................................
Frequency Hz.........................................
Frequency 80 Hz
.........................................
80 Frequency 80 Hz 8080 Hz 8080
......................................... 80 8080 80 80
BP 10/35 force ................................
Centrifugal 658 Centrifugal
962 700 force 1084
kNCentrifugal 532 350force
................................
35 Centrifugal kN
force ................................ 35 kN 3535 kN 3535
35 ................................ 35 3535 35 35
Amplitudemm
Amplitude .......................................... ..........................................
Amplitude1,50 Amplitude 1,30mm 1,50mm 1,30
..........................................
.......................................... 1,50mm 1,30 1,50 1,30 1,30
1,30 1,30 1,30
BP 12/40 658 962 700 1084 542 400
Capacities CapacitiesCapacities Capacities
Fuel ...................................................
Fuel ................................................... l Fuel 3,0 3,1 l 3,0 l
................................................... 3,03,0l
Fuel ................................................... 3,13,0 3,1 3,0
3,1 3,0 3,0
Technical modifications reserved. Machines mayTechnical
be shownmodifications
with options.
Technical
reserved.
modifications
Technical
Machinesreserved.
modifications
may be Machines
shownreserved.
withmay
options.
be
Machines
shown with
mayoptions.
be shown with options.
Technical Data BOMAG BOMAG
BP 10/35 BP 12/40
Weights
Operating weight CECE ........................................... kg 65 72
Basic weight ............................................................. kg 64 71
Dimensions
Working width .......................................................... mm 350 400
Driving Characteristics
Working speed, max. ............................................... m/min 25 25
Max. gradeability (dep. on soil con.) ........................ % 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
BOMAG BOMAG BOMAG BOMAG air
Cooling .....................................................................
Hellerwald Hellerwald HellerwaldHellerwald
air
Number of cylinders D-56154 .................................................
Boppard D-56154 BoppardD-56154 Boppard
D-56154 1 Boppard 1
Performance SAE J 1349
P.O. Box 5162 ........................................
P.O. Box 5162 kW
P.O. Box 5162
P.O. Box2,65162 2,6
Tel. (0)6742 - 1000 Tel. (0)6742Tel.
Speed .......................................................................- 1000
(0)6742
Tel.- 1000
min-1 (0)6742
3.600- 1000 3.600
Fax (0)6742 - 3090 Fax (0)6742Fax
Drive system ............................................................ - 3090
(0)6742
Fax- 3090
(0)6742
mech.- 3090 mech.
PRE 692
Fuel
040219
67 010
PRE
..........................................................................
Sa03
692 67PRE
010692 67 010 040219 Sa03040219 Sa03 040219 Sa03
Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
31
Shipping dimensions in m3
BPR 25/50 D 0,594
BPR 35/60 0,652
BPR 35/60 D 0,711
Light Equipment
egulation BPR
Vibration and 35/60
Vibration D and
throttle Vibration730 and
regulation
throttle 1030 BPR
1160regulation
regulation
throttle 35/60
1545DBPR
832 35/60630730BPR
D 1030 35/60730
1160
D 1030
1545730 1160
832 10301545
630 1160
832 1545 630 832 630
TECHNICAL DATA
on the steering
on the rod
steering
Technical Data
Highly wear-resistant,
on therod
Highly wear-resistant,
steering rod
Highly wear-resistant,
Technical Technical
DataBOMAG Technical
Data Data BOMAG BOMAG BOMAG
BOMAG BOMAG
BOMAG BOMAG BOMAG BOMAG BOMAG BOMAG
late powder-coated
powder-coated
base powder-coated
plate base platebase plate BPR 25/50 D BPR 35/60BPR 25/50 BPRD 35/60
BPR BPR
DD 35/60
25/50
BPR 25/50
BPR BPR
D 35/60BPR35/60
35/60D 35/60BPR
BPR D 35/60 D
Fully protected
FullyV-belt
protected
Fully V-belt
protected V-belt
sion Automatic decompression
Automatic Automatic
Weights decompression decompression
Weights Weights Weights
0D) Operating
(BPR25/50D,BPR35/60D) weight
(BPR25/50D,BPR35/60D)
(BPR25/50D,BPR35/60D) Operatingkgweight
CECE (W) ............. Operating169
CECE (W) CECE
Operating
weight .............
weight 228CECE
(W) kg 169.............
.............
(W) kg 248 169kg 228 169 228 248
228 248 248
Basic
Recoil starter weight
Recoil starter
Recoil starter Basic weight
...................................... 166
......................................
kgBasic weightBasic 225kg 166kg 245
......................................
weight ...................................... 166kg 225 166 225 245
225 245 245
on Back-up drive
Back-up
protection
drive
Back-upprotection
drive protection
Dimensions
t low oil Automatic shutdown
Automatic Automatic
at
shutdown at low Dimensions
low oil shutdown oil at low Dimensions
oil Dimensions
level Basic levelworkinglevel Basic working
width ........................... mmBasic width
530 630mm
...........................
working
Basic width
working 530mm 630
...........................
width 530mm 630
........................... 530 630 630
630 630 630
Lowest
(BPR35/60) passing
(BPR35/60) (BPR35/60) Lowest passing
height ....................... mmLowest height
750passing .......................
Lowest height
passing 670 750mm 730
mm .......................
.......................
height 750mm 670 750 670 670
730 730 730
Min. height w. steering in top position Min. height mm w. steering
Min. height
940 Min. in steering
w. top
heightposition topmm
1.030
w.insteeringposition top mm
in 940 position 940mm 1.030
1.030 940 1.030 1.030
1.030 1.030 1.030
3-2-1 Warranty
Max.3-2-1 Warranty
height w.3-2-1 Warranty
steering in top Max.
position mm
height w. steering
Max. height
1.260Max. in steering
w. top
height topmm
w.in1.180
position steering
position topmm
in1.260 position 1.260
1.180 1.260 1.180
mm 1.180 1.180
1.180 1.180 1.180
otectionHour meterHour (Engine
meterprotection
Hour
(Engine
meter protection
(Engine protection
hood BPR35/60)
hood Characteristics
Driving BPR35/60)
hood BPR35/60) Driving Characteristics Driving Characteristics
Driving Characteristics
3 Working speed, max. ........................Working speed, Working
m/min max.
20 speed,
Working max.speed,
........................
20max.
........................ m/min........................
20 m/min2020 m/min2020 20 20
20 20 20
Optional Equipment
Optional Equipment
Optional
Max. gradeability Equipment
(dep. on soilMax. . %Max. gradeability
con.)gradeability 32(dep.Max. on gradeability
(dep.
soil con.) on . soil
32 (dep.
% con.) on32 .soil%con.)3232. % 3232 32 32
32 32 32
0,136
Drive
otectionFully closedFully
engine
closed protection
Fully
engine
closed protection
engineDriveprotection Drive Drive
0,167 Engine
ength hood made hood manufacturer
of high-strength
made hood
of high-strength
made Engine
Engine manufacturer
.........................
of high-strength Hatzmanufacturer
Engine manufacturer
.........................
Honda .........................
......................... Hatz Hatz
Hatz Hatz
Honda Honda HatzHonda Hatz Hatz
Type
steel (+10kg)
steel (+10kg) steel (+10kg) Type Type ..................................................
Type ..................................................
..................................................
.................................................. 1B20 GX 160 1B20 1B20 GX
1B20 1B20160 GX 160 1B20
GX 160 1B20 1B20
Emission stage
Emission stage .................................. Emission stage
Emission
V ..................................
stage
..................................
Stage StageVV StageV/CARB
..................................
StageV/CARB Stage P.3V Stage Stage V StageV/CARB
StageV/CARB
P.3 Stage P.3
V StageP.3V Stage V
kg) Transport wheels
Transport (+5kg)
Transport
wheels (+5kg)
wheels (+5kg) Cooling air ..............................................
Cooling ..............................................
Cooling ..............................................
Cooling .............................................. air air airair airair air air
air air air
Tool kit Number
Tool kit Tool kit ..........................
of cylinders Number of Number cylinders1 of..........................
Number
cylinders of..........................
cylinders
1 11
..........................
1 11 1 11 1 1
Special Performance
painting
Special painting
Special
ISO 3046 painting Performance
..................... kW Performance
ISO 3,13046Performance
ISO 3046 ISO
..................... 3,1 kW 3,1
.....................
3046
kW ..................... 3,1kW 3,1 3,1 3,1 3,1
Service Performance
KitService KitService
SAE J 1349 Kit ..................
Performance kW Performance
SAE J 1349 Performance
SAE J 1349 SAE ..................
3,6
.................. J 1349 ..................
kW kW kW 3,6 3,6 3,6
ng bow,Electric Speed
meter starter
Electric
+ Hourstarter
Electric
meter+ Hour
startermeter+ Speed
Hour meter
................................................ Speed3.000
min-1 ................................................
3.600
................................................ min-1 3.000 min-13.000
Speed ................................................ 3.000
min-13.600
3.000 3.600 3.600
3.000 3.000 3.000
(+20kg/BPR35/60D)
(+20kg/BPR35/60D)
Drive system (+20kg/BPR35/60D) Drive system
..................................... Drive system Drive
.....................................
mech. mech. mech. mech.
.....................................
system ..................................... mech. mech.mech. mech. mech. mech. mech. mech.
dle TOUGH WARRANTY
TOUGH
Fuel WARRANTY
TOUGH WARRANTY Fuel
................................................... Fuel ...................................................
Diesel Fuel Gasoline
................................................... Diesel Diesel
Diesel
................................................... Diesel
Gasoline Gasoline Gasoline
Diesel Diesel Diesel
Dimensions
Fuel comsump. aver. in mm Fuel comsump.
during operation l/hFuel comsump.
0,7 Fuel
aver. duringcomsump.
aver. during
operation aver.
1,1 operation
l/h during l/h 0,7
0,7 operation 0,7l/h 1,1 0,7 1,1 1,1
0,7 0,7 0,7
e plate
w oil Exciter system H H1 H2
Exciter system L system
Exciter L1 W
Exciter system
Frequency
Frequency ......................................... Frequency
85 Frequency
.........................................
.........................................
.........................................
Hz 80 Hz 85 Hz 8085 Hz 8085 80 80
80 80 80
BP 10/35 force ................................
Centrifugal 658 Centrifugal
962 700 kN 1084
Centrifugal
force 532
Centrifugal 350force
force ................................
35................................
................................
25 kN 25 kN 3525 kN 3525 35 35
35 35 35
BP 12/40
Capacities 658 Capacities
962 700Capacities 1084 Capacities
542 400
l Fuel ...................................................
3,0 Fuel ...................................................
Fuel ...................................................
Fuel ................................................... 3,1 l 3,0 l 3,0l
3,0 3,0
3,1 3,1 3,1
3,0 3,0 3,0
Technical modifications reserved. Machines mayTechnical
be shownmodifications
with options.
Technical
reserved.
modifications
Technical
Machines
reserved.
modifications
may beMachines
shownreserved.
with
mayoptions.
be
Machines
shown with
mayoptions.
be shown with options.
33
Shipping dimensions in m3
BPR 40/60 D 0,590
BPR 40/60 D
Fully closed engine protection
hood made of high-strength
steel
Dimensions in mm
Comfortable control lever
Height adjustable steering rod H
Low vibration steering rod BPR 40/60 D 7
Steering rod lockable in
transport and working position
Vibration and throttle regulation
on the steering rod
Technical Data
Highly wear-resistant,
powder-coated base plate
Fully protected V-belt
Automatic decompression Weights
Recoil starter Operating weight CE
3-2-1 Warranty Basic weight ..........
Hour meter (Electric starter)
Dimensions
Optional Equipment Basic working width
Lowest passing heig
Min. height w. steer
Transport wheels (+5kg) Max. height w. stee
Electric starter (+20kg)
Tool kit Driving Characteri
Special painting Working speed, ma
Plastic mat Max. gradeability (d
Service Kit
TOUGH WARRANTY Drive
Engine manufacture
Type ......................
Emission stage ......
Cooling ..................
Number of cylinders
Performance ISO 30
Speed ....................
Drive system ..........
Fuel .......................
Fuel comsump. ave
Exciter system
Frequency .............
Fields of application: Centrifugal force ....
Amplitude ..............
Earthwork and paving applications.
Capacities
Construction of roads, forestry roads and railtracks, Fuel .......................
Technical modifications reserve
backfills, trench and sewer line construction, land-
scape gardening, foundations.
Standard Equipment
Light Equipment
regulation
on and throttle regulation
steering rod
wear-resistant, TECHNICAL DATA
Technical DataTechnical Data BOMAG BOMAG
plate
r-coated base plate BPR 40/60 D BPR 40/60 D
rotected V-belt
sion
atic decompression Weights Weights
starter Operating weight Operating
CECE (W) weight
....................................
CECE (W) ....................................
kg 260 kg 260
Warranty Basic weight ............................................................. 257
Basic weight .............................................................
kg kg 257
meter
tarter)(Electric starter)
Dimensions Dimensions
Equipment Basic working width Basic.................................................
working width .................................................
mm 600 mm 600
Lowest passingLowest height .............................................
passing height .............................................
mm 700 mm 700
Min. height w. steering
Min. height in topw.position
steering......................
in top position mm ......................
1.030 mm 1.030
port
kg) wheels (+5kg) Max. height w. steering
Max. height in topw.position
steering.....................
in top positionmm 1.120 mm
..................... 1.120
c) starter (+20kg)
t Driving Characteristics
Driving Characteristics
al
3 painting Working speed,Working max. ...............................................
speed, max. ...............................................
m/min 27 m/min 27
mat Max. gradeability Max.
(dep.gradeability
on soil con.) (dep.........................
on soil con.) ........................
% 32 % 32
e Kit 0,136
H WARRANTY Drive Drive
0,167 Engine manufacturer Engine................................................ Hatz
manufacturer ................................................ Hatz
Type ......................................................................... 1B20
Type ......................................................................... 1B20
Emission stage Emission
......................................................... Stage V
stage ......................................................... Stage V
Cooling ..................................................................... air
Cooling ..................................................................... air
Number of cylinders Number ................................................. 1
of cylinders ................................................. 1
Performance ISO Performance
3046 ............................................ kW 3,1
ISO 3046 ............................................ kW 3,1
Speed ....................................................................... min-1 3.000 min-1
Speed ....................................................................... 3.000
ng bow, Drive system ............................................................ mech.
Drive system ............................................................ mech.
Fuel .......................................................................... Diesel
Fuel .......................................................................... Diesel
Fuel comsump.Fuel aver.comsump.
during operation
aver. during.................... 0,7
operationl/h.................... l/h 0,7
dle
Dimensions in mm
e plate Exciter systemExciter system
w oil H ................................................................
H1 H2 L
Frequency ................................................................
Frequency L1
Hz W80 Hz 80
Centrifugal forceCentrifugal
....................................................... kN 40
force ....................................................... kN 40
BP 10/35 .................................................................
Amplitude Amplitude 658 962 700 1084 532 mm 350 1,40 mm
................................................................. 1,40
BP 12/40
Capacities Capacities 658 962 700 1084 542 400
Fuel ..........................................................................
Fuel .......................................................................... l 3,0 l 3,0
Technical modifications reserved.
TechnicalMachines
modifications
mayreserved.
be shownMachines
with options.
may be shown with options.
35
Shipping dimensions in m3
BPR 45/55 D 0,739
BPR 50/55 D 0,739
Shipping dimensions in m3
BPR 45/55 D
ns in m3 0,739
BPR 50/55 D
0,739 0,739
0,739
Standard Equipment
t
Engine protection hood
hood Comfortable control lever
ol lever Low vibration steering rod Dimensions in mm B
ering rod Height adjustable steering rod H
rodDimensions
lockable in in mm H H1 H2 L L1 W W1 W2
steering Steering
rod D
able in transport and working position H H1
BPRH2
45/55LD L1 790
W 980
W1 1350
W2 1700 900 450 550 750 P
Vibration and throttle regulation
king position BPR1350
50/551700
D T
BPR 45/55 D 790 980 900 790
450 980
550 1350
750 1700 900 450 550 750
on the steering rod
ttle regulation F
BPR 50/55 D
Highly wear-resistant, 790 980 1350 1700 900 450 550 750
d
ant, powder-coated base plate PRE 692 59 010 040219 Sa02
Technical Data
36
se plate Automatic decompression
BOMAG BOMAG
Technical Data
pression Multi-functional, foldable BOMAG BOMAGBPR 45/55 D BPR 50/55 D
oldable single-point lifting facility
BPR 45/55 D BPR 50/55 D
Extension plates (550mm) Weights
Dimensions in Dimensions
mm Dimensions
in mm in mm
ring
adjustable
Height
rod adjustable
steering rodsteering rod
ngn rodSteering
lockable rod
in lockable in H H1 H2 HL H1 L1 H H2W H1 LW1 H2 L1W2 LW L1 W1 W W2 W1 W2
ort
position
and
transport
working and
position
BPR working
45/55 Dposition
BPR790 45/55980 DBPR1350 45/55 790
1700
D 980 900 7901350
450 980 1700
550 1350
900
750 1700
450 900 550 450 750 550 750
on
egulation
and
Vibration
throttleand
regulation
throttle regulation
BPR 50/55 D BPR790 50/55980 DBPR1350 50/55 790
1700
D 980 900 7901350
450 980 1700
550 1350
900
750 1700
450 900 550 450 750 550 750
steering
on the rodsteering rod
Light Equipment
wear-resistant,
Highly wear-resistant,
r-coated
late powder-coated
sion
atic decompression TECHNICAL DATA
base plate base plate
Technical DataTechnical Technical
Automatic decompression
Data Data BOMAG BOMAGBOMAG BOMAGBOMAG BOMAG
ble
unctional,
Multi-functional,
foldable foldable BPR 45/55 D BPR 45/55
BPR D D45/55
50/55
BPR BPRD 50/55BPR
D 50/55 D
ity
pointsingle-point
lifting facility
lifting facility
sion
mm)plates
Extension (550mm)
plates
Weights (550mm) Weights Weights
c starter
Electric starterOperating weight Operating
CECE (W) weight
Operating CECE (W) CECE
....................................
weight kg
kg ....................................
385
....................................
(W) 390
385kg 385 390 390
starter
Recoil starter Operating weight Operating
CECE (W1) weight
Operating CECE (W1)CECE
..................................
weight kg
kg ..................................
400
..................................
(W1) 405
400kg 400 405 405
up
on drive
Back-up
protectionOperating
drive protectionweight Operating
CECE weight
Operating
(W2) CECE (W2)
weight
.................................. kg 415
..................................
CECE (W2) kg 415
.................................. 420
kg 415 420 420
ng
oil signal
level
Warning at low Basic
signal atweight
oil level Basic weight
level Basic
low oil............................................................. kg 395
............................................................. kg
weight ............................................................. 400
395kg 395 400 400
5/55D)(BPR45/55D) Dimensions Dimensions Dimensions
Warranty
3-2-1 Warranty Basic working width Basic.................................................
workingBasic width .................................................
working mm
width .................................................
mm 550 550
550mm 550 550 550
meterHour meterWorking width without Working extension
width
Working bars
without (W)
width ...............
extension
without bars 450 (W) mm
(W) ...............
mm
extension bars 450
450mm
............... 450 450 450
Lowest passing Lowest height .............................................
passing
Lowest height
passing.............................................
mm 790 mm
height ............................................. 790
790mm 790 790 790
Equipment
Optional Equipment Min. height w. steering
Min. height in topw.position
Min. height ......................
steering in steering
w. top position ......................
mm
in top position mm
980...................... 980
980mm 980 980 980
3 Max. height w. steering
Max. height in topw.position
Max. height .....................
steering in steering
w. top position in mm .....................
top 1.220
position mm 1.220 1.220 1.220
mm
1.220
..................... 1.220
OMIZERECONOMIZER
(+5kg) (+5kg)
t Tool 0,136
kit Driving Characteristics
Driving Characteristics
Driving Characteristics
al painting
Special paintingWorking speed,Working max. ...............................................
speed,
Working max. ...............................................
speed, m/min 28 m/min 28 m/min
max. ............................................... 28 28 28 28
0,167
matPlastic matMax. gradeability (dep.
Max. on Max.
soil con.)
gradeability (dep.........................
gradeabilityon soil con.)
(dep. on........................
%soil con.) %
35........................
35 %35 35 35 35
sion
750mm)
plates
Extension
(650/750mm)
plates
Drive (650/750mm) Drive Drive
e Kit Service Kit Engine manufacturer Engine................................................
manufacturer ................................................
Engine manufacturer ................................................
Kohler Hatz Kohler Hatz
Kohler Hatz
rsion
TC US EPA
Version
4 NRTC EPA 4 NRTC
Type .........................................................................
Type .........................................................................
Type .........................................................................
RD 15 440 RD 1B15 40
440 RD 15 440
1B 40 1B 40
50:6,8kW)
5:6,2kW
(BPR45:6,2kW
- BPR50:6,8kW)
- BPR50:6,8kW)
Emission stage Emission
.........................................................
stage
Emission .........................................................
stage .........................................................
Stage V StageStage
V VStage V Stage V Stage V
H WARRANTY
TOUGH WARRANTY
Cooling .....................................................................
Cooling .....................................................................
air
Cooling ..................................................................... air air air air air
ng bow, Number of cylinders Number .................................................
of Number
cylindersof.................................................
1
cylinders ................................................. 1 1 1 1 1
Performance ISO Performance
3046 ............................................
ISO 3046 ............................................
Performance kW 6,8 kW
ISO 3046 ............................................ 6,7
6,8kW 6,8 6,7 6,7
Speed ....................................................................... min-1 3.000 min-1 3.000
Speed .......................................................................
Speed ....................................................................... 3.000 3.000 3.000
min-1 3.000
dle Drive system ............................................................
Drive system Drive............................................................
system mech. mech.
............................................................ mech. mech. mech. mech.
Dimensions in mm
e plate Fuel ..........................................................................
Fuel ..........................................................................
Diesel
Fuel .......................................................................... Diesel Diesel Diesel
Diesel Diesel
w oil Fuel comsump. Fuel aver.comsump.H Fuel
during H1
operation
comsump. H2
aver. during L during
....................
operation
aver. L1 W1,4 ....................
l/h....................
operation l/h 1,5
1,4l/h 1,4 1,5 1,5
Exciter
BP 10/35systemExciter 658
system
Exciter
962system
700 1084 532 350
Frequency ................................................................
Frequency Frequency
................................................................
Hz 70 Hz
................................................................ 66
70 Hz 70 66 66
BP 12/40 forceCentrifugal
Centrifugal 658 962 700 1084 542
.......................................................
force kN 400
.......................................................
Centrifugal 45 kN
force ....................................................... 50
45 kN 45 50 50
Amplitude .................................................................
Amplitude .................................................................
mm 1,55 mm 1,55
Amplitude ................................................................. 1,85
mm 1,55 1,85 1,85
Capacities CapacitiesCapacities
Fuel ..........................................................................
Technical Data l 5,0
Fuel .......................................................................... l 5,0l5,0
Fuel .......................................................................... 5,0 5,0 5,0
Technical modifications reserved.
TechnicalMachines
modifications
Technical
may reserved.
be shown
modifications
Machines
with options.
reserved.
may beMachines
shown with
mayoptions.
be shown with options.
BOMAG BOMAG
BP 10/35 BP 12/40
Weights
Operating weight CECE ........................................... kg 65 72
Basic weight ............................................................. kg 64 71
Dimensions
Working width .......................................................... mm 350 400
Driving Characteristics
Working speed, max. ............................................... m/min 25 25
Max. gradeability (dep. on soil con.) ........................ % 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
BOMAG BOMAG BOMAG air air
Cooling .....................................................................
Hellerwald Hellerwald Hellerwald
Number of cylinders D-56154 .................................................
Boppard D-56154 Boppard
D-56154 Boppard 1 1
Performance SAE J 1349 ........................................
P.O. Box 5162 P.O. Box 5162 P.O. Box 5162 kW 2,6 2,6
Tel. (0)6742 - 1000 Tel. (0)6742 Tel.
- 1000
(0)6742 - 1000 min-1
Speed ....................................................................... 3.600 3.600
Fax (0)6742 - 3090 Fax (0)6742 Fax
- 3090
(0)6742 - 3090
Drive system ............................................................ mech. mech.
59 PRE
010 692 59
Fuel ..........................................................................
040219
010 Sa02 040219 Sa02040219 Sa02
Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
37
Shipping dimensions in m3
BPR 55/65 D 0,873
BPR 60/65 0,891
BPR 60/65 D 0,873
Shipping dimensions in m3
BPR 55/65 D 0,873
ns in m3
BPR 60/65 0,891
0,873
BPR 60/65 D 0,873
0,891
Standard Equipment
0,873
nt Engine protection hood
Comfortable control lever
hood Low vibration steering rod
ol lever Height adjustable steering rod Dimensions in mm
B
ering rod Steering rod lockable in H H1 H2 L L1 W W1 W2 H
Dimensions in mm
steering transport
rod and working position BPR 55/65 D 790 980 1350 1700 900 450 650 750 D
able in Vibration and throttle regulationH H1 H2 L L1 W W1 W2 P
king position BPR 60/65 790 990 1350 1735 970 450 650 750
on the steering
BPRrod55/65 D 790 980 1350 1700 900 450 650 750 T
ttle regulation
Highly wear-resistant,
BPR 60/65 790
BPR 60/65 D 790 980 1350 1700 900
990 1350 1735 970 450 650 750
450 650 750 F
d powder-coated base plate
ant, BPR 60/65 D 790 Technical
980 Data900
1350 1700 450 650 750 BOMAG BOMAG BOMAG
Automatic decompression PRE 692 83 010 040219 Sa02
38
se plate Multi-functional, foldable
Technical Data BPR 55/65 D BPR 60/65 BPR 60/65 D
pression single-point lifting facility BOMAG BOMAG BOMAG
oldable Extension plates (650mm) Weights BPR 55/65 D BPR 60/65 BPR 60/65 D
facility Electric starter Operating weight CECE (W) ............. kg 435 400 440
Dimensions in mm Dimensions Dimensions
in mm Dimensions in mm in mm
ring rodHeight adjustable
Height steering
adjustable
Heightrod adjustable
steering rod steering rod
n Steering rodSteering
lockablerod Steering H rodH1
in lockable H2 inL
inlockable L1 WH W1 H1 W2 H2
H LH1 HL1 H2 H1 W
L H2 W1
L1 LW2 W L1 W1 WW2 W1 W2
positiontransportBPRand
transport
working
55/65 D andtransport
position
working
790 and position
980 working
BPR
135055/65position
1700DBPR 900 55/65 450
790 BPR
D 650 98055/65
7501350
790
D 1700
980 790 900
1350980 450
17001350 650
900 1700 750
450 900
650 450 750 650 750
egulation VibrationBPR
and
Vibration
throttle and
60/65
Vibration
regulation
throttle andregulation
790 990 BPR
throttle regulation
135060/651735 BPR 970 60/65 450
790 BPR65099060/65
7501350
790 1735 990 790 970
1350990 450
17351350 650
970 1735 750
450 970
650 450 750 650 750
on the steering
on the rodsteering
on therod steering rod
Light Equipment
BPRHighly
60/65 D
Highly wear-resistant, Highly790
wear-resistant, 980 BPR
wear-resistant, 135060/651700DBPR 900 60/65 450
790 BPR
D 650 98060/65
7501350
790
D 1700
980 790 900
1350980 450
17001350 650
900 1700 750
450 900
650 450 750 650 750
late
sion
powder-coated
TECHNICAL DATA
powder-coated
base plate
Technical Data
Automatic decompression
powder-coated
AutomaticAutomatic
base platebase plate
decompression
Technical Data
decompression
Technical
BOMAG Technical
Data Data BOMAG BOMAG BOMAG
BOMAG BOMAG
BOMAG BOMAGBOMAGBOMAG BOMAG BOMAG
ble Multi-functional,
Multi-functional,
foldable
Multi-functional,
foldable foldable BPR 55/65 D BPR 60/65BPR 55/65 BPRBPR
D 60/6555/65
BPRD
BPR
D60/65
55/65
BPRD 60/65
BPR 60/65BPR
BPR60/65 D 60/65BPR
D 60/65 D
ity single-pointsingle-point
lifting facility
single-point
lifting facility lifting facility
mm) Extension plates
Extension
Weights (650mm)
Extension
plates (650mm) platesWeights
(650mm) Weights Weights
Electric Operating
Electricweight
starter starter
ElectricCECE starter Operatingkg
(W) ............. Operating
weight 435
CECE weight
Operating CECE
(W) .............
weight 400 kg
(W)CECE.............
(W) kg 440
435 ............. 435kg 400 435 400 440
400 440 440
Operating
Recoil starter weight
Recoil starter Recoil CECEstarter ........... kg
(W1) Operating Operating
weight 455
CECE weight
(W1)CECE
Operating 420
...........
weight (W1) CECE 455 kg
kg...........
(W1) 460455kg 420
........... 455 420 460
420 460 460
on Back-upOperating
drive
Back-up weight
protection
drive
Back-up CECE
protection (W2)
drive ........... kg
Operating
protection Operating
weight 466
CECE weight
(W2)CECE
Operating 431
(W2)
...........
weight CECE 466 kg
kg...........
(W2) 471466kg 431
........... 466 431 471
431 471 471
Basic
oil level Warning signal weight
Warning ......................................
at lowsignal
Warning
oil level
at low
signal Basic
oil level
at low oil levelkg
weight Basic 450
weight
......................................
Basic 415 kg 450
......................................
weight kg 455
......................................450 kg 415450 415 455
415 455 455
(BPR55/65D) (BPR55/65D)
Dimensions (BPR55/65D) Dimensions Dimensions Dimensions
3-2-1 Warranty
3-2-1
Basic Warranty
working 3-2-1
widthWarranty Basic working
........................... mm Basicwidth ...........................
Basicwidth
working
650 working widthmm 650 mm 650 650mm 650
...........................
...........................
650 650 650 650
650 650 650
Hour meter Hour width
Working meter Hour meter
without extension Working
bars (W) width
mm without
Working 450widthWorking
extension
withoutwidth
bars mm extension
without
(W)
extension
450 450(W)
bars mmbars 450450 mm 450
(W) 450 450 450
450 450 450
Lowest passing height ....................... Lowest passing mm Lowest height Lowest
790passing .......................
passing
height height 790 mm 790
mm .......................
.......................
790 790mm 790 790 790 790
790 790 790
Optional Equipment
Optional
Min. heightEquipment
Optional
w. steering Equipment Min. height
in top position mm w. steering
Min. 980 Min.
height in top
w. height
position
steering w.in990topmm
steering in980
position top mmposition 980980mm 990 980 990 980
990 980 980
3 Max. height w. steering in top Max. positionheight mm w. steering
Max. height
1.220 Max.in top
w. height
position
steering w.in mm
steering
top
1.220 in1.220
position topmm position mm 1.220
1.220
1.220 1.220 1.220 1.220
1.220 1.220 1.220
ECONOMIZER ECONOMIZER
(+5kg)ECONOMIZER (+5kg) (+5kg)
0,136
Tool kit Driving
Tool Characteristics
kit Tool kit Driving Characteristics Driving Characteristics
Driving Characteristics
Special Working
painting
Special speed,
paintingmax. painting
Special Working speed,
........................ m/min
Working max. Working
28 speed,........................
max.speed, 28max.
m/min ........................
28 m/min2828 m/min
........................ 2828 28 2828 28 28
0,167 Max.
Plastic mat gradeability
Plastic matPlastic maton soilMax.
(dep. con.)gradeability
. %Max. 35 (dep. Max.on soil
gradeability gradeability
con.)on
(dep. . soil
35 (dep.
% con.) on35.soil%con.) 35.35 % 3535 35 3535 35 35
750mm)Extension plates
Extension
Drive (550/750mm)
Extension
plates (550/750mm)
platesDrive(550/750mm) Drive Drive
Service Engine
Kit Service KitService Kit
manufacturer Engine manufacturer
......................... Engine Engine
.........................
manufacturer
Kohler manufacturer Kohler Hatz
Honda .........................
......................... Kohler Honda Kohler Honda Hatz Honda Hatz Hatz
TC US Version
TypeUS
EPA Version
4 NRTCUSEPA Version
4 NRTC EPAType 4 NRTC ..................................................
.................................................. TypeKD 15Type GX 390 KD 15 440
440 ..................................................
.................................................. 1B40
KD 15 440 GX KD390 GX 390 1B40
15 440 GX 390 1B40 1B40
(BPR60/65D) (BPR60/65D) (BPR60/65D) Emission stage
Emission stage .................................. Emission..................................
Stage Emission
stage
V stage Stage V Stage
..................................
StageV/CARB
.................................. P.3 Stage V VStageV/CARB P.3 Stage
Stage V StageV/CARB V StageP.3
StageV/CARB
P.3 V Stage V
TOUGHCooling
WARRANTY
TOUGH WARRANTY
TOUGH WARRANTY Cooling ..............................................
.............................................. Cooling air ..............................................air
Cooling ..............................................
air airair airair air air
air air air
ng bow, Number of cylinders .......................... Number of cylinders
Number 1 of ..........................
Number
cylinders cylinders
1 1
of ..........................
..........................
11 11 1 11 1 1
Performance ISO 3046 ..................... Performance kW ISO6,8
Performance 3046 Performance
.....................
ISO 3046 ISO 8,7 kW 6,8 kW 6,7
3046 .....................
..................... 6,8kW 8,76,8 8,7 6,7
8,7 6,7 6,7
Speed ................................................
Speed ................................................ Speed
min-1 3.600min-1 3.000
Speed ................................................
................................................
3.000 min-13.000 min-13.600
3.000 3.000 3.600 3.000
3.600 3.000 3.000
dle Drive system .....................................
Drive mech. mech.
system ..................................... mech. mech. mech. mech. mech. mech. mech.
Dimensions in mm
Drive system ..................................... Drive system
mech. mech.
..................................... mech.
e plate Fuel ...................................................
Fuel ................................................... Fuel Diesel Gasoline Diesel Diesel
Fuel ...................................................
................................................... Diesel GasolineDiesel
Diesel Gasoline Gasoline Diesel Diesel
w oil Fuel comsump. aver. during H operationH1 comsump.
Fuel H2l/hFuelLaver.
1,4 Fuel
comsump. L1 comsump.
during W during
operation
aver. 3,5 l/h
aver. 1,4 operation
during
operation l/h 1,5 1,4l/h 3,51,4 3,5 1,5
3,5 1,5 1,5
BP 10/35
Exciter system 658 Exciter962 700 system 1084system
Exciter 532 350
Exciter system
Frequency
Frequency ......................................... Hz.........................................
66 Frequency
Frequency .........................................
68 Hz 66 Hz 6866 Hz 6866
......................................... 68 68
68 68 68
BP 12/40 force ................................
Centrifugal 658 Centrifugal
962 700 1084
force
kNCentrifugal
55 542 400force
................................
Centrifugal 60 ................................
kN 55 kN 6055 kN 6055
force ................................ 60 60
60 60 60
Amplitudemm
Amplitude .......................................... ..........................................
1,85 Amplitude
Amplitude ..........................................
1,96mm 1,85mm 1,96
.......................................... mm 1,96
1,85 1,85 1,96 1,96
1,96 1,96 1,96
Capacities Capacities Capacities
Capacities
Technical Data Fuel ...................................................
Fuel ................................................... 5,0 Fuel ...................................................
6,1 l 5,0 l
l Fuel ...................................................
BOMAG 5,05,0l 6,15,0
BOMAG6,1 5,0
6,1 5,0 5,0
Technical modifications reserved. Machines may
Technical
be shownmodifications
with options.
Technical
reserved.
modifications
Machines
Technical
reserved.
may
modifications
be Machines
shownreserved.
withmay
options.
be
Machines
shown with
mayoptions.
be shown with options.
BP 10/35 BP 12/40
Weights
Operating weight CECE ........................................... kg 65 72
Basic weight ............................................................. kg 64 71
Dimensions
Working width .......................................................... mm 350 400
Driving Characteristics
Working speed, max. ............................................... m/min 25 25
Max. gradeability (dep. on soil con.) ........................ % 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
BOMAG BOMAG BOMAG
Cooling ..................................................................... BOMAG air air
Hellerwald Hellerwald HellerwaldHellerwald
Number of cylinders D-56154 .................................................
Boppard D-56154 BoppardD-56154 Boppard
D-56154 1 Boppard 1
Performance SAE J 1349
P.O. Box 5162 ........................................
P.O. Box 5162 kW
P.O. Box 5162
P.O. Box2,65162 2,6
Speed .......................................................................
Tel. (0)6742 - 1000 Tel. (0)6742Tel.- 1000 min-1
(0)6742 3.600- 1000
Tel.- 1000
(0)6742 3.600
Fax (0)6742 - 3090 Fax (0)6742Fax
Drive system ............................................................ - 3090
(0)6742
Fax- 3090
(0)6742
mech.- 3090 mech.
Fuel .......................................................................... Gasoline Gasoline
PRE 692
040219
83 010
PRE
Sa02
692 83PRE
010692 83 010 040219 Sa02040219 Sa02
Fuel comsump. aver. during operation040219 Sa02
.................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
39
Shipping dimensions in m3
BPR 50/55 D 0,944
BPR 55/65 D 0,944
Standard Equipment
Light Equipment
egulation
on and
Vibration
throttleand
regulation
throttle regulation
steering
on the
wear-resistant,
TECHNICAL DATA
rodsteering rod
Technical DataTechnical Technical
Highly wear-resistant,
Data Data BOMAG BOMAGBOMAG BOMAGBOMAG BOMAG
plate
r-coated
powder-coated
base plate base plate BPR 50/55 D BPRBPR 55/65
50/55 D D50/55
BPR BPRD 55/65BPR
D 55/65 D
sion
atic decompression
Automatic decompression
ble
unctional, Weights
Multi-functional,
foldable foldable Weights Weights
ity single-point
point Operating
lifting facility weight
lifting facility CECE (W)
Operating ....................................
weight
Operating CECE weight(W) CECE 440
kg....................................
....................................
(W) kg 482 440
440kg 482 482
mm)
ion plates
Extension Basic (650mm)
(650mm)
plates weight .............................................................
Basic weight kg 435
.............................................................
Basic kg
weight ............................................................. 477 435
435kg 477 477
c starter
Electric starter
starter
Recoil starter Dimensions Dimensions Dimensions
ondrive
up Back-up
protectionBasic
drive working width
protection Basic.................................................
working Basic width .................................................
working mm 680 mm
width ................................................. 680 680
680mm 680 680
oil signal
ng level
Warning at low Lowest
signal
oil level passing
at low height .............................................
Lowest
oil level passing
Lowest height
passing mm 800
............................................. mm
height ............................................. 800 800
800mm 800 800
Min. height w. steering
Min. height in topw.position
Min. height ......................
steering in steering
w. top position mm
in top 990......................
......................
position mm 990 990
990mm 990 990
5/65D)(BPR55/65D) Max. height w. steering
Max. height in topw.position
Max. height .....................
steering in steering
w. top position mm
in top 1.230
.....................
position mm
..................... 1.230 1.230 1.230
mm
1.230 1.230
Warranty
3-2-1 Warranty
meterHour meterDriving Characteristics Driving Characteristics
Driving Characteristics
3 Working speed,Workingmax. ...............................................
speed,
Working max. m/min 25
...............................................
speed, m/min 25 m/min
max. ............................................... 25 25 25 25
Equipment
Optional Equipment Max. gradeability (dep.
Max. on Max.
soil con.)
gradeability (dep.........................
gradeabilityon soil con.)
(dep. % 35........................
on........................
soil con.) % 35 %35 35 35 35
0,136
t Tool kit Drive Drive Drive
0,167
l painting Engine manufacturer
Special painting Engine................................................
manufacturer Hatz
................................................
Engine manufacturer HatzKohler Hatz
................................................ Kohler Kohler
e Kit Service Kit Type ......................................................................... 1B 40
Type .........................................................................
Type ......................................................................... 1B 40KD 15 440
1B 40 KD 15 440 KD 15 440
Emission stage Emission
.........................................................
stage
Emission Stage V
.........................................................
stage .........................................................StageStage
V VStage V Stage V Stage V
H WARRANTY
TOUGH WARRANTY
Cooling ..................................................................... air
Cooling .....................................................................
Cooling ..................................................................... air air air air air
Number of cylinders Number .................................................
of Number 1
cylindersof.................................................
cylinders ................................................. 1 1 1 1 1
Performance ISO 3046 ............................................
Performance kW 6,7
ISO 3046 ............................................
Performance kW
ISO 3046 ............................................ 6,8
6,7kW 6,7 6,8 6,8
Speed ....................................................................... min-1 3.000 min-1 3.000
Speed .......................................................................
Speed ....................................................................... 3.000 3.000 3.000
min-1 3.000
ng bow, Drive system ............................................................
Drive system mech.
............................................................
Drive system ............................................................ mech.mech. mech. mech. mech.
Fuel .......................................................................... Diesel
Fuel ..........................................................................
Fuel .......................................................................... Diesel Diesel Diesel
Diesel Diesel
dle Fuel comsump.Fuel aver.comsump.
during Fueloperation
aver. during
comsump. ....................
operation
aver. during l/h 1,5 ....................
....................
operation l/h 1,4
1,5l/h 1,5 1,4 1,4
Dimensions in mm
e plate Exciter systemExciter system Exciter system
w oil Frequency H FrequencyH1 H2 L L1
................................................................
Frequency ................................................................ Hz W66 Hz 66
66 Hz
................................................................ 66 66 66
Centrifugal
Centrifugal force .......................................................
Centrifugal 50
force .......................................................
kN kN 50 kN
force ....................................................... 55 50 55 55
BP 10/35 658 962 700 1084 532 350
Capacities CapacitiesCapacities
BP
Fuel12/40 658 Fuel962 700 1084 542
.......................................................................... l 400 5,0
Fuel .......................................................................... l 5,0l 5,0
.......................................................................... 5,0 5,0 5,0
Technical modifications reserved.
TechnicalMachines mayreserved.
modifications be modifications
Technical shownMachines
with options.
reserved.
may beMachines
shown with
mayoptions.
be shown with options.
41
Shipping dimensions in m3
BPR 60/65 0,944
BPR 60/65 D 0,944
Standard Equipment
Light Equipment
on
egulation
and
Vibration
throttleand
regulation
throttle regulation
steering
on the rod
wear-resistant,
TECHNICAL DATA
steering rod
Technical DataTechnicalTechnical
Highly wear-resistant,
Data Data BOMAG BOMAG
BOMAG BOMAG BOMAG BOMAG
plate
er-coated
powder-coated
base platebase plate BPR 60/65 BPR 60/65
BPR 60/65 BPR 60/65BPR
BPRD60/65 D 60/65 D
sion
atic Automatic
decompression decompression
ble
unctional,
Multi-functional,
foldable
Weights foldable Weights Weights
-point
ity single-point Operating
lifting facility weight
lifting facility Operating
CECE (W) weight
Operating CECE (W)CECE 447
....................................
....................................
weight (W) kg
kg.................................... 447 484 447
kg 484 484
sion
mm)Extension
plates (650mm) Basic (650mm)
plates Basic weight .............................................................
weight .............................................................
Basic weight .............................................................
kg 442 kg 442 487 442
kg 487 487
c starter
Electric starter
starter
Recoil starter Dimensions Dimensions Dimensions
up
on drive
Back-up
protectionBasic
drive protection Basic.................................................
working width workingBasic width mm
.................................................
working 680 mm
width ................................................. 680 680 680
mm 680 680
ng
oil signal
level
Warning at low Lowest
signal
oil level passing
at low Lowest
oil level passing height
height .............................................
Lowest passing mm
............................................. mm
height .............................................
800 800 800 800
mm 800 800
Min. height
Min. height w. steering in top w.position
Min. steering insteering
height ......................
w. top position mm
in top ......................
position mm
990...................... 990 990 990
mm 990 990
55/65D)(BPR55/65D) Max. height
Max. height w. steering in Max.
topw.position
steering insteering
top position
height .....................
w. mm
in top .....................
position
1.230 mm
..................... 1.230 1.230 1.230
mm
1.230 1.230
Warranty
3-2-1 Warranty
meterHour meter Driving Characteristics Driving Characteristics
Driving Characteristics
3 Working speed, Working speed, ...............................................
max. ...............................................
Working max. speed, max. ...............................................
m/min 25 m/min 25 m/min 25 25 25 25
Equipment
Optional Equipment Max. gradeability Max.
(dep. gradeability
on Max.
soil con.)(dep.
gradeabilityon soil con.)
........................
(dep. on........................
soil
% con.) %
35........................35 %35 35 35 35
0,136
it Tool kit Drive Drive Drive
0,167
al painting Engine manufacturer
Special painting Engine manufacturer ................................................
................................................
Engine manufacturer Honda Hatz Honda Hatz
Honda
................................................ Hatz
Type .........................................................................
e KitService Kit Type ......................................................................... GX 390
Type ......................................................................... GX 1B39040 GX 390 1B 40 1B 40
Emission stage Emission stage .........................................................
.........................................................
Emission StageV/CARB P.3
stage ......................................................... Stage VStageV/CARB
StageV/CARB P.3 Stage P.3
V Stage V
H WARRANTY
TOUGH WARRANTY Cooling .....................................................................
Cooling ..................................................................... air
Cooling ..................................................................... air air air air air
Number of cylinders Number ofNumber
cylindersof.................................................
................................................. 1
cylinders ................................................. 1 1 1 1 1
Performance ISO Performance kW
ISO 3046 ............................................
3046 ............................................
Performance 8,7 kW
ISO 3046 ............................................ 8,7kW6,7 8,7 6,7 6,7
Speed .......................................................................
Speed ....................................................................... min-1 3.600 min-1 3.600
Speed ....................................................................... 3.000 3.600 3.000
min-1 3.000
ng bow, Drive system ............................................................
Drive system ............................................................
Drive mech.
system ............................................................ mech. mech. mech.
mech. mech.
Fuel ..........................................................................
Fuel .......................................................................... Gasoline
Fuel .......................................................................... Diesel GasolineDiesel
Gasoline Diesel
dle Fuel comsump. Fuel aver.comsump.
during Fuel aver. during
operation
comsump. operation
....................
aver. during l/h....................
operation l/h
3,5 .................... 1,5
3,5l/h 3,5 1,5 1,5
Dimensions in mm
e plate Exciter systemExciter system Exciter system
w oil Frequency H FrequencyH1 ................................................................
H2 L
Frequency ................................................................ L1
Hz W68
................................................................ Hz 68
68 Hz 68 68 68
Centrifugal forceCentrifugal force .......................................................
.......................................................
Centrifugal kN 60 kN
force ....................................................... 60
60 kN 60 60 60
BP 10/35 .................................................................
Amplitude Amplitude 658 962 .................................................................
Amplitude 700 1084 532 mm 350
.................................................................
1,96 mm 1,96
mm
1,96 1,96 1,96 1,96
BP 12/40
Capacities Capacities 658 962 700 1084 542 400
Capacities
Fuel ..........................................................................
Fuel .......................................................................... l 6,1l 5,0
Fuel ..........................................................................
l 6,1 6,1 5,0 5,0
Technical modifications reserved.
TechnicalMachines
modifications
Technical
may reserved.
be modifications
shown Machines
with options.
reserved.
may beMachines
shown with
mayoptions.
be shown with options.
43
Shipping dimensions in m3
BPR 70/70 D 1,185
BPR 100/80 D 1,376
Shipping dimensions in m3
BPR 70/70 D
ns in m3 1,185
BPR 100/80
1,185D 1,376
1,376
Standard Equipment
nt
Engine protection hood
Electric starter
hood Tip-Control
Dimensions in mm B
Back-up drive protection H
Low vibration steering rodin mm
Dimensions H H1 H2 L L1 W W1 W2 D
tection Height adjustable steering rod
H BPRH2
H1 70/70 LD L1 910
W 1030
W1 1470
W2 1860 980 550 700 850 P
ering rod Steering rod lockable in T
steering transport
rod BPR
and 70/70 Dposition 910
working
BPR1470
1030 100/80 D 980 910
1860 550 1180
700 1540
850 1890 980 650 800 950
F
able in Vibration and BPRthrottle
100/80regulation
D 910 1180 1540 1890 980 650 800 950
king position
on the steering rod PRE 692 64 010 110219 Sa03
ttle regulation Technical Data
d
44
Highly wear-resistant, BOMAG BOMAG
powder-coated base plate
Technical Data BOMAG BPR 70/70 D
BOMAG BPR 100/80 D
ant, Automatic shutdown at low oil
se plate level Weights BPR 70/70 D BPR 100/80 D
Dimensions inDimensions mm Dimensions
in mm in mm
on
p drive
Back-upprotection
drive protection
bration
rod Low steering
vibrationrodsteering rod H H1 H2 HL H1 L1 H H2W H1 LW1 H2 L1W2 L W L1
W1 W W2 W1 W2
ring
adjustable
Height
rod steering
adjustable
BPR rod steering
70/70 D rod 910
BPR 70/701030DBPR1470 70/70910
1860
D 1030 980 9101470
550 10301860
700 1470980
850 1860
550 980 700 550 850 700 850
ngn rodSteering
lockablerodin lockable in
BPR 100/80 D BPR910 100/80 1180
BPR
D 1540 100/80
910
1890D 1180980 9101540
650 11801890
800 1540980
950 1890
650 980 800 650 950 800 950
ort
position
and
transport
workingand position
working position
Light Equipment
on
egulation
and
Vibration
throttleand
regulation
throttle regulation
steering
on the
wear-resistant,
TECHNICAL DATA
rodsteering rod
Technical DataTechnical Data
Highly wear-resistant,
Technical Data BOMAG BOMAGBOMAG BOMAGBOMAG BOMAG
r-coated
late powder-coated
base plate base plate BPR 70/70 D BPRBPR 70/70
100/80
BPR
D 70/70
D BPR D 100/80 D 100/80 D
BPR
atic
t lowshutdown
Automatic
oil atshutdown
low oil at low oil
level Weights Weights Weights
ble
unctional,
Multi-functional,Operating
foldable foldableweight Operating
CECE (W) weight
....................................
Operating CECE weight(W) ....................................
CECE (W) kg 557kg
kg ....................................
557 677 557 677 677
point
ity single-point Operating
lifting facility weight
lifting facility Operating
CECE (W1) weight ..................................
Operating CECE weight(W1)CECE kg
kg ..................................
..................................
(W1) 580 580kg700 580 700 700
mm)
ion plates
Extension Operating
(700mm)
plates (700mm)weight Operating
CECE (W2) Operating
weight (W2)CECE
..................................
CECE weight kg ..................................
(W2) 595
.................................. kg 595kg716 595 716 716
0/70D)(BPR70/70D) Basic weight .............................................................
Basic weight Basic weight kg 570 kg 570
.............................................................
............................................................. 695
kg 570 695 695
mm)
ion plates
Extension (800mm)
plates (800mm)
Dimensions Dimensions Dimensions
00/80D)
(BPR100/80D) Basic working width Basic.................................................
working Basicwidth .................................................
working mm
width .................................................
mm 700 700mm800 700 800 800
Warranty
3-2-1 Warranty Working width without Workingextension
width without
Working bars extension
(W)
width without bars
............... 550 (W) mm
(W) ...............
mm
extension bars 550mm
............... 650 550 650 650
meterHour meterLowest passingLowest passing
Lowest height
passing.............................................
height ............................................. mm 910 mm
height ............................................. 910mm910 910 910 910
ment
ode gas
Cityadjustment
mode gasMin.adjustment Min. height
height w. steering in top w.position
Min. steering in top
w. position
height ......................
steering ......................
mm
in top 1.030
position mm 1.030
...................... 1.180 1.030 1.180
mm 1.180
3 Max. height w. steering Max. height in top w.position
Max. steering in top
height .....................
w. position
steering in mm .....................
top 1.180
position mm 1.180
..................... 1.320 1.180 1.320
mm 1.320
Equipment
Optional Equipment
0,136 Driving Characteristics Driving Characteristics
Driving Characteristics
OMIZER (+5kg)Working
ECONOMIZER (+5kg)speed,Working speed, max. ...............................................
max. ...............................................
Working speed, m/min 28 m/min 28 m/min
max. ............................................... 28 28 28 28
t
0,167
Tool kit Max. gradeability Max.
(dep. gradeability
on Max.
soil con.) (dep. on soil con.)on........................
........................
gradeability (dep. %soil con.) % 35 %
35........................ 35 35 35 35
l painting
Special painting Drive Drive Drive
mat Plastic matEngine manufacturer Engine................................................
manufacturer ................................................
Engine manufacturer HatzHatz Hatz
................................................
Hatz Hatz Hatz
mm)
ion plates
Extension (850mm)
plates (850mm) Type .........................................................................
Type .........................................................................
Type .........................................................................
1D 81 1D 811D 90 1D 81 1D 90 1D 90
0/70D)(BPR70/70D) Emission stage Emission stage
Emission.........................................................
.........................................................
stage .........................................................
Stage V Stage V VStage VStage V Stage V
Stage
mm)
ion plates
Extension (950mm)
plates
Cooling (950mm) Cooling .....................................................................
..................................................................... air
Cooling ..................................................................... air air air air air
ng bow,
00/80D)
(BPR100/80D) Number of cylinders Number of Number
cylindersof.................................................
................................................. 1
cylinders ................................................. 1 1 1 1 1
e Kit Service Kit Performance ISOPerformance
3046 ISO 3046 ............................................
............................................
Performance ISO 3046 kW 9,3 kW 9,3
............................................ 10,3
kW 9,3 10,3 10,3
nmentally
liant Environmentally Speedcompliant
compliant ....................................................................... min-1 2.700 min-1 2.700
Speed .......................................................................
Speed ....................................................................... 2.600 2.700 2.600
min-1 2.600
dle Drive system ............................................................ mech.mech. mech. mech.
lic oilhydraulic oil Dimensions in mm
Drive system ............................................................
Drive mech.
system ............................................................ mech.
e plate
orcrank-handle Fuel
Safety crank-handle
for for Fuel ..........................................................................
..........................................................................
Fuel Diesel Diesel
.......................................................................... Diesel Diesel Diesel Diesel
w
ency
3kg)oilemergency Fuel
starting (+3kg) (+3kg) Fuel
comsump.
starting H Fuel
aver.comsump.
during H1
aver.
operation
comsump. H2
during L during
operation
....................
aver. L1 W2,0 ....................
l/h....................
operation l/h 2,0 l/h
2,2 2,0 2,2 2,2
rsion
TC US EPA Version
4 NRTCBPEPA
Exciter 4
10/35 NRTC
systemExciter system 658 Exciter962system 700 1084 532 350
0/70D:9,2kW)
(BPR70/70D:9,2kW) Frequency Frequency
................................................................
Frequency ................................................................ Hz 66 Hz 66 Hz
................................................................ 54 66 54 54
H WARRANTY
TOUGH WARRANTY BP 12/40 forceCentrifugal
Centrifugal 658 force 962 700 1084 542 kN 400
.......................................................
.......................................................
Centrifugal 70 kN
force ....................................................... 70 kN100 70 100 100
Amplitude .................................................................
Amplitude ................................................................. mm 1,80 mm
Amplitude ................................................................. 1,80mm
2,70 1,80 2,70 2,70
Capacities CapacitiesCapacities
Technical Data
Fuel ..........................................................................
Fuel .......................................................................... l 10,0 l 10,0l10,0 10,0
Fuel ..........................................................................
BOMAG 10,0
BOMAG10,0
Technical modifications reserved.
TechnicalMachines
modifications
Technical
may reserved.
be shown
modifications
Machines
with options.
reserved.
may be Machines
shown with
may
options.
be shown with options.
BP 10/35 BP 12/40
Weights
Operating weight CECE ........................................... kg 65 72
Basic weight ............................................................. kg 64 71
Dimensions
Working width .......................................................... mm 350 400
Driving Characteristics
Working speed, max. ............................................... m/min 25 25
Max. gradeability (dep. on soil con.) ........................ % 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
BOMAG BOMAG BOMAG
Cooling ..................................................................... air air
Hellerwald Hellerwald Hellerwald
Number of cylinders D-56154 .................................................
BoppardD-56154 BoppardD-56154 Boppard 1 1
Performance SAE P.O. JBox1349
5162........................................
P.O. Box 5162 P.O. Box 5162 kW 2,6 2,6
(0)6742 - 1000 min-1
Speed .......................................................................
Tel. (0)6742 - 1000Tel. (0)6742Tel. - 1000 3.600 3.600
Fax (0)6742 - 3090 Fax (0)6742Fax - 3090
(0)6742 - 3090
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
64 PRE
010 692 64
110219
010 Sa03 110219 Sa03110219 Sa03
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
45
Shipping dimensions in m3
BPR 70/70 D 1,185
BPR 100/80 D 1,376
Shipping dimensions in m3
BPR 70/70 D
ns in m3 1,185
BPR 100/80
1,185D 1,376
1,376
Standard Equipment
nt
Engine protection hood
Electric starter
hood Low vibration steering rod
Dimensions in mm B
Height adjustable steering rod H
ering rod Steering rod lockable in H H1 H2 L L1 W W1 W2
Dimensions in mm D
steering transport
rod and working position BPRH2
70/70 LD L1 910
W 1180
W1 1540
W2 1860 980 550 700 850 P
able in Vibration and throttle regulationH H1
T
king position BPRrod
on the steering 70/70 D 910 BPR1540
1180 100/80 D 980 910
1860 550 1180
700 1540
850 1890 980 650 800 950
F
ttle regulation
Highly wear-resistant,
BPR 100/80 D 910 1180 1540 1890 980 650 800 950
d powder-coated base plate PRE 692 37 010 110219 Sa02
ant, Technical Data
46
Automatic shutdown
se plate level
at low oil BOMAG BOMAG
Technical Data BOMAG BPR 70/70 D
BOMAG BPR 100/80 D
wn at lowMulti-functional,
oil foldable
single-point lifting facility Weights BPR 70/70 D BPR 100/80 D
Dimensions in Dimensions
mm Dimensions
in mm in mm
ring
adjustable
Height
rod adjustable
steering rodsteering rod
ngn rodSteering
lockable rod
in lockable in H H1 H2 HL H1 L1 H H2W H1 LW1 H2 L1W2 LW L1 W1 W W2 W1 W2
ort
position
and
transport
working and
position
BPR working
70/70 Dposition
BPR910 70/701180DBPR1540 70/70 910
1860
D 1180 980 9101540
550 11801860
700 1540
980
850 1860
550 980 700 550 850 700 850
on
egulation
and
Vibration
throttleand
regulation
throttle regulation100/80
BPR 100/80 D BPR910 1180
BPR
D 1540 100/80910
1890D 1180980 9101540
650 11801890
800 1540
980
950 1890
650 980 800 650 950 800 950
steering
on the rodsteering rod
Light Equipment
wear-resistant,
Highly wear-resistant,
r-coated
late powder-coated
atic
t lowshutdown
Automatic
oil at
TECHNICAL DATA
base plate base plate
Technical DataTechnical Technical
shutdown
low oil at low oil
Data Data BOMAG BOMAGBOMAG BOMAGBOMAG BOMAG
level BPR 70/70 D BPR BPR 100/80
70/70BPR D BPR
D 70/70 D 100/80 D 100/80 D
BPR
ble
unctional,
Multi-functional,
foldable foldable
ity
pointsingle-point
lifting facility
lifting facility Weights Weights
Weights
sion
mm)plates
Extension Operating
(700mm)
plates weight
(700mm) Operating
CECE (W) weight
Operating CECE (W) CECE
....................................
weight kg
kg ....................................
547
....................................
(W) 677
547kg 547 677 677
0/70D)(BPR70/70D) Operating weight Operating
CECE (W1) weight
Operating CECE (W1)CECE
..................................
weight kg
kg ..................................
570
..................................
(W1) 700
570kg 570 700 700
sion
mm)plates
Extension Operating
(800mm)
plates weight
(800mm) Operating
CECE (W2) weight
Operating CECE (W2)CECE
weight
.................................. kg
kg ..................................
585
..................................
(W2) 716
585kg 585 716 716
00/80D)
(BPR100/80D) Basic weight Basic weight .............................................................
Basic weight
............................................................. kg 560 kg 560
............................................................. 695
kg 560 695 695
up
on drive
Back-up
protection
drive protection
Dimensions Dimensions Dimensions
Warranty
3-2-1 Warranty Basic working width Basic.................................................
workingBasic width .................................................
working mm
width .................................................
mm 700 800
700mm 700 800 800
meterHour meterWorking width without Working extension
width
Working bars
without (W)
width ...............
extension
without bars 550 (W) mm
(W) ...............
mm
extension bars 650
550mm
............... 550 650 650
ment
ode gas
City adjustment
mode gas Lowestadjustment
passing Lowest
height .............................................
passing
Lowest height
passing.............................................
mm 910 mm
height ............................................. 910
910mm 910 910 910
Min. height w. steering
Min. height in topw.position
Min. height ......................
steering in steering
w. top position in top......................
mm position1.180 mm
...................... 1.180 1.180 1.180
mm
1.180 1.180
3Equipment
Optional Equipment Max. height w. steering
Max. height in topw.position
Max. height .....................
steering in steering
w. top position in mm .....................
top 1.260
position mm
..................... 1.320 1.260 1.320
mm
1.260 1.320
OMIZER 0,136
(+5kg)Driving
ECONOMIZER Characteristics
(+5kg) Driving Characteristics
Driving Characteristics
t Tool kit Working speed,Working max. ...............................................
speed,
Working max. ...............................................
speed, m/min 28 m/min 28 m/min
max. ............................................... 28 28 28 28
al painting
0,167 Max.
Special painting gradeability (dep.
Max. on soil con.)
gradeability
Max. ........................
(dep. on soil
gradeability con.)
(dep. on........................
%soil con.) %
35........................
35 % 35 35 35 35
0D) matPlastic
(BPR70/70D)
matDrive
(BPR70/70D) Drive Drive
sion
mm)plates
Extension
(850mm)
plates
Engine(850mm)
manufacturer Engine................................................
manufacturer ................................................
Engine manufacturer HatzHatz Hatz
................................................
Hatz Hatz Hatz
0/70D)
(BPR70/70D) Type .........................................................................
Type .........................................................................
Type .........................................................................
1D 81 1D 811D 90 1D 81 1D 90 1D 90
sion
mm)plates
Extension
(950mm)
plates
Emission(950mm)
stage Emission
.........................................................
stage
Emission.........................................................
stage .........................................................
Stage V StageStage
V VStage V Stage V Stage V
00/80D)
(BPR100/80D) Cooling .....................................................................
Cooling .....................................................................
air
Cooling ..................................................................... air air air air air
ng
e Kitbow,
Service Kit Number of cylinders Number .................................................
of Number
cylindersof.................................................
1
cylinders ................................................. 1 1 1 1 1
orcrank-handle Performance
Safety crank-handle
for for ISO Performance
3046 ............................................
ISO
Performance 3046 ............................................
ISO 3046 kW 9,3 kW 9,3
............................................ 10,3
kW 9,3 10,3 10,3
3kg)
ency emergency
starting Speed
(+3kg)
starting.......................................................................
(+3kg) min-1 2.700 min-1 2.700
Speed .......................................................................
Speed ....................................................................... 2.600 2.700 2.600
min-1 2.600
dle
rsion
TC US EPA
Version
4 NRTCDimensions
Drive
EPA system in mm
4 NRTC............................................................
Drive system ............................................................
Drive mech.
system ............................................................ mech.mech. mech. mech. mech.
e0/70D:9,2kW)
plate Fuel ..........................................................................
(BPR70/70D:9,2kW) Fuel ..........................................................................
Diesel Diesel Diesel Diesel
Diesel
Fuel .......................................................................... Diesel
w Fuel comsump. Fuel
oilTOUGH WARRANTY
H WARRANTY aver.comsump.H Fuel
during H1
operation
comsump. H2
aver. during L during
....................
operation
aver. L1 W2,0 ....................
l/h....................
operation l/h 2,2
2,0l/h 2,0 2,2 2,2
BP 10/35
Exciter systemExciter 658
system962system
Exciter 700 1084 532 350
Frequency ................................................................
Frequency Frequency
................................................................
Hz 66 Hz
................................................................ 54
66 Hz 66 54 54
BP 12/40 forceCentrifugal
Centrifugal 658 962 700 1084 542
.......................................................
force kN 400
.......................................................
Centrifugal 70 kN
force ....................................................... 100
70 kN 70 100 100
Amplitude .................................................................
Amplitude .................................................................
mm 1,80 mm 1,80
Amplitude ................................................................. 2,70
mm 1,80 2,70 2,70
Capacities CapacitiesCapacities
Technical Data
Fuel .......................................................................... l 10,0
Fuel .......................................................................... l 10,0
Fuel ..........................................................................
BOMAG l10,0 10,0 10,0
BOMAG10,0
Technical modifications reserved.
TechnicalMachines
modifications
Technical
may reserved.
be shown
modifications
Machines
with options.
reserved.
may beMachines
shown with
mayoptions.
be shown with options.
BP 10/35 BP 12/40
Weights
Operating weight CECE ........................................... kg 65 72
Basic weight ............................................................. kg 64 71
Dimensions
Working width .......................................................... mm 350 400
Driving Characteristics
Working speed, max. ............................................... m/min 25 25
Max. gradeability (dep. on soil con.) ........................ % 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
BOMAG BOMAG BOMAG
Cooling ..................................................................... air air
Hellerwald Hellerwald Hellerwald
Number of cylinders D-56154 .................................................
Boppard D-56154 Boppard
D-56154 Boppard 1 1
Performance SAE P.O. JBox1349
5162........................................
P.O. Box 5162 P.O. Box 5162 kW 2,6 2,6
Tel. (0)6742 - 1000 Tel. (0)6742 Tel. (0)6742 - 1000 min-1
Speed .......................................................................
- 1000 3.600 3.600
Fax (0)6742 - 3090 Fax (0)6742 Fax
- 3090
(0)6742 - 3090
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
37 PRE
010 692 37
110219
010 Sa02 110219 Sa02110219 Sa02
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
47
Shipping dimensions in m3
BPH 80/65 S 0,702
BPH 80/65 S
Hydrostatic drive
Cable remote control
Electric starter
Dimensions in mm
Engine protection hood
Highly wear resistant base plate
Automatic shutdown at low oil BPH 80/65 S
level
Lockable engine cover and dash
board
Single point lifting device ,
Technical Data
foldable
Battery disconnect switch
Easy Service Concept
-Diagnostic module with fault Weights
code display Operating weight C
-Hour meter Operating weight C
-foldable full protection hood Basic weight .........
3-2-1 Warranty Dimensions
Basic working width
Optional Equipment Lowest passing hei
Special painting Driving Character
Combination remote control Working speed, ma
cable/radio Max. gradeability (d
Mobile quick charger
Service Kit Drive
Tool kit Engine manufactur
TOUGH WARRANTY Type .....................
Emission stage .....
Cooling .................
Number of cylinder
Performance ISO 3
Speed ...................
Drive system .........
Fuel ......................
Fuel comsump. ave
Exciter system
Frequency ............
Amplitude .............
Fields of application: Centrifugal force ...
Earthwork. Capacities
Fuel ......................
Construction of roads, forestry roads and railtracks, Hydraulic ..............
Technical modifications reserv
backfills, trench and sewer line construction, land-
scape gardening, foundations.
Standard Equipment
Hydrostatic drive
Cable remote control
Electric starter
Dimensions in mm
Engine protection hood
Highly wear resistant base plate H L L1 W W1
Automatic shutdown at low oil BPH 80/65 S 785 1118 1088 650 800
level
Lockable engine cover and dash
board B
Single point lifting device , H
Technical Data BOMAG
foldable D
Battery disconnect switch BPH 80/65 S P
Easy Service Concept T
mensions in mm F
-Diagnostic module with fault Weights
H L L1 W W1 code display Operating weight CECE (W) .................................... kg 707
H 80/65 S 785 1118 1088 650 800 -Hour meter Operating weight CECE (W1) .................................. kg 750 PRE 700 15 010 050219 Sa02
48 -foldable full protection hood Basic weight ............................................................. kg 745
3-2-1 Warranty Dimensions
Basic working width ................................................. mm 800
Optional Equipment
Dimensions inDimensions
mm in mm
dprotection hood
base
wearplate
resistant base plate H L L1 HW L W1 L1 W W1
atic
t lowshutdown
oil atBPH
low 80/65
oil S BPH785
80/651118
S 1088785
650 1118
800 1088 650 800
ble
r and
engine
dashcover and dash
Light Equipment
ice
point
e
, lifting device ,
TECHNICAL DATA
Technical DataTechnical Data BOMAG BOMAG
itch
disconnect switch BPH 80/65 S BPH 80/65 S
ervice Concept
ostic
th fault
module with fault
Weights Weights
isplay Operating weight CECE (W)
Operating ....................................
weight kg 707
CECE (W) .................................... kg 707
meter Operating weight CECE (W1)
Operating weight .................................. kg 750
CECE (W1) .................................. kg 750
full protectionBasic
nlehood kg 745
Basic weight .............................................................
hood weight ............................................................. kg 745
Warranty Dimensions Dimensions
Basic working width
Basic.................................................
working width .................................................
mm 800 mm 800
Equipment Lowest passingLowest
height .............................................
passing height .............................................
mm 785 mm 785
l painting Driving Characteristics
Driving Characteristics
nation Working speed,Working
ontrol remote control max. ............................................... m/min 28
speed, max. ............................................... m/min 28
3adio Max. gradeability Max.(dep. on soil con.)
gradeability (dep.........................
on soil con.) ........................
% 30 % 30
quick charger
e Kit 0,136 Drive Drive
t Engine manufacturer Engine................................................
manufacturer ................................................
Hatz Hatz
0,167
H WARRANTY Type .........................................................................
Type .........................................................................
1D 90 W 1D 90 W
Emission stageEmission stage .........................................................
......................................................... Stage V Stage V
Cooling .....................................................................
Cooling ..................................................................... air air
Number of cylinders Number of cylinders .................................................
................................................. 1 1
Performance ISO Performance
3046 ............................................ kW 10,9 kW
ISO 3046 ............................................ 10,9
min-1 3.000 min-1
Speed .......................................................................
Speed ....................................................................... 3.000
Drive system ............................................................
Drive system ............................................................ hydraulic hydraulic
ng bow, Fuel ..........................................................................
Fuel .......................................................................... Diesel Diesel
Fuel comsump.Fuel aver.comsump. aver. during
during operation operationl/h
.................... 2,5
.................... l/h 2,5
dle Exciter systemExciter
Dimensions in mmsystem
e plate Frequency ................................................................ Hz 55
Frequency ................................................................ Hz 55
w oil H .................................................................
H1 H2 L
Amplitude .................................................................
Amplitude L1
mm W1,80 mm 1,80
Centrifugal force .......................................................
Centrifugal kN 80
force ....................................................... kN 80
BP 10/35 658 962 700 1084 532 350
Capacities Capacities
BP
Fuel12/40 658 962 700 1084 542
.......................................................................... 400
Fuel ..........................................................................
l 10,0 l 10,0
Hydraulic ..................................................................
Hydraulic ..................................................................
l 25,0 l 25,0
Technical modifications reserved.
TechnicalMachines
modifications
mayreserved.
be shownMachines
with options.
may be shown with options.
49
Shipping dimensions in m3
BW 55 E 0,671
BW 55 E
Height adjustable steering rod
Dimensions in mm
Vibration and throttle regulation
on the steering rod B
Scrapers front and rear BW 55 E 6
Automatic shutdown at low oil
level
Single point lifting device
Safety control
Technical Data
Back-up drive protection
Support bars front and rear
3-2-1 Warranty
Weights
Optional Equipment Operating weight C
Basic weight ..........
Tool kit Static linear load CE
Special painting Dimensions
Service Kit Working width ........
TOUGH WARRANTY
Driving Characteri
Speed (1), forward
Speed (1), reverse
Speed (2), forward
Speed (2), reverse
Max. gradeability w
Drive
Engine manufacture
Type ......................
Emission stage ......
Cooling ..................
Number of cylinders
Performance SAE J
Speed ....................
Fuel .......................
Starting device ......
Drive system .........
Fields of application: Fuel comsump. ave
Shipping
ons in m3dimensions in m3
BW 55 E 0,671 0,671
Standard
ent Equipment
m Sprinkler system
enedVibration
steeringdampened
rod steering rod B
Height adjustable
e steering rod steering rod H
Dimensions Dimensions in mm
Vibration
rottle and throttle
regulation regulation in mm D
odon the steering rod B C1 C2 DB HC1 L C2 O1 D O2 H SL WO1 O2 S W P
ndScrapers
rear front and rear
BW 55 E BW
67855 125
E 678 900
330 400 125 1100
330 100
400 18900 5 1100560
100 18 5 560 T
ownAutomatic
at low oilshutdown at low oil F
level
ng Single
device point lifting device PRE 620 02 010 050219 Sa03
Safety control 50
Technical Data Technical Data
Back-up drive protection BOMAG BOMAG
rotection
nt Support
and rearbars front and rear BW 55 E BW 55 E
Dimensions inDimensions
mm in mm
on
egulation
and throttle regulation
steering rod B C1 C2 BD C1 H C2 L DO1 HO2 L S O1 W O2 S W
arrs front and rearBW 55 E BW 55
678E 125 330 678
400 125
900 330
1100400
100 900
18 1100
5 100
560 18 5 560
atic
t lowshutdown
oil at low oil
Light Equipment
ice
point lifting device
control
on
p drive protection
TECHNICAL DATA
Technical DataTechnical Data BOMAG BOMAG
drtrear
bars front and rear BW 55 E BW 55 E
Warranty
Weights Weights
Equipment Operating weight CECE ...........................................
Operating kg 150
weight CECE ........................................... kg 150
Basic weight ............................................................. kg 141
Basic weight ............................................................. kg 141
t Static
Static linear load CECE linear
........................................... kg/cm 2,7
load CECE ........................................... kg/cm 2,7
l painting Dimensions Dimensions
e Kit Working width .......................................................... mm 560
Working width .......................................................... mm 560
H WARRANTY
Driving Characteristics
Driving Characteristics
Speed (1), forward
Speed ................................................... km/h 0- 1,1 km/h
(1), forward ................................................... 0- 1,1
Speed (1), reverse
Speed ................................................... km/h 0- 1,1 km/h
(1), reverse ................................................... 0- 1,1
3 Speed (2), forward
Speed ................................................... km/h 0- 1,6 km/h
(2), forward ................................................... 0- 1,6
Speed (2), reverse
Speed ................................................... km/h 0- 1,6 km/h
(2), reverse ................................................... 0- 1,6
0,136 Max. gradeability without/with
Max. gradeability vibr. ..........................
without/with % 25/20 %
vibr. .......................... 25/20
0,167 Drive Drive
Engine manufacturer Engine................................................ Honda
manufacturer ................................................ Honda
Type ......................................................................... GX 120
Type ......................................................................... GX 120
Emission stageEmission ......................................................... StageV/CARB P.3
stage ......................................................... StageV/CARB P.3
Cooling ..................................................................... air
Cooling ..................................................................... air
Number of cylinders Number ................................................. 1
of cylinders ................................................. 1
Performance SAE J 1349 ........................................
Performance kW 2,5
SAE J 1349 ........................................ kW 2,5
ng bow, Speed ....................................................................... min-1 2.750 min-1 2.750
Speed .......................................................................
Fuel .......................................................................... Gasoline
Fuel .......................................................................... Gasoline
Starting device Starting
......................................................... Recoil starter Recoil starter
device .........................................................
dle Drive system ............................................................
Drive mech.
system ............................................................ mech.
Dimensions in mm
e plate Fuel comsump.Fuel aver.comsump.
during operation
aver. during....................
operationl/h 0,7
.................... l/h 0,7
w oil H H1 H2 L L1 W
Exciter systemExciter system
BP 10/35
Drive 658 ............................................................
962 700 1084 532 350
system ............................................................
Drive system mech. mech.
Frequency ................................................................ 77
Frequency ................................................................
Hz Hz 77
BP 12/40 .................................................................
Amplitude Amplitude 658 962 700 1084 542 mm 400 0,50 mm
................................................................. 0,50
Centrifugal force .......................................................
Centrifugal force .......................................................
kN 10 kN 10
Sprinkler System
Sprinkler System
Technical Data
Type of sprinkling .....................................................
Type gravity
of sprinkling ..................................................... gravity
BOMAG BOMAG
Capacities Capacities
Fuel ..........................................................................
Fuel ..........................................................................
l 2,5 l BP
2,5 10/35 BP 12/40
Water .......................................................................
Water .......................................................................
l 16,0 l 16,0
Weights
Technical modifications reserved.
TechnicalMachines
modifications
mayreserved.
be shownMachines
with options.
may be shown with options.
Operating weight CECE ........................................... kg 65 72
Basic weight ............................................................. kg 64 71
Dimensions
Working width .......................................................... mm 350 400
Driving Characteristics
Working speed, max. ............................................... m/min 25 25
Max. gradeability (dep. on soil con.) ........................ % 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
BOMAG BOMAG
Cooling ..................................................................... air air
Hellerwald Hellerwald
Number of cylinders D-56154 .................................................
BoppardD-56154 Boppard 1 1
Performance SAE P.O. JBox1349
5162........................................
P.O. Box 5162 kW 2,6 2,6
Speed .......................................................................
Tel. (0)6742 - 1000Tel. (0)6742 - 1000 min-1 3.600 3.600
Fax (0)6742 - 3090 Fax (0)6742 - 3090
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
2 010 050219 Sa03 050219 Sa03
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
51
Shipping dimensions in m3
BW 71 E-2 2,260
BW 71 E-2
Electric starter
Dimensions in mm
Engine protection
Vibration dampened steering rod B
Height adjustable steering rod BW 71 E-2 8
Vibration and throttle regulation
on the steering rod
Scrapers front and rear
Protective engine covering
Technical Data
Single point lifting device
Safety control
Back-up drive protection
Support bars front and rear Weights
3-2-1 Warranty Operating weight C
Basic weight ..........
Optional Equipment Static linear load CE
Dimensions
Support wheel+Parking brake Working width ........
Tool kit
Special painting Driving Characteri
Service Kit Speed (1), forward
Environmentally compliant Speed (1), reverse
hydraulic oil Speed (2), forward
TOUGH WARRANTY Speed (2), reverse
Max. gradeability w
Drive
Engine manufacture
Type ......................
Emission stage ......
Cooling ..................
Number of cylinders
Performance ISO 3
Speed ....................
Fuel .......................
Starting device ......
Drive system .........
Fields of application: Fuel comsump. ave
Shipping dimensions in m3
BW
s in71
m3E-2 2,260
2,260
Standard Equipment
t
Hydrostatic drive
Sprinkler system
Electric starter B
Dimensions in mm H
Engine protection
Vibration dampened steering rod B C1 C2 D H L O1 O2 S W D
Dimensions in mm P
Height adjustable steering rod
ed steering rod B BW C1
71 E-2C2 D 825H 190
L 450
O1 600
O2 1245
S 2200
W 115 25 8 710
T
Vibration and throttle regulation
steering F
on therod BW 71 E-2
steering rod 825 190 450 600 1245 2200 115 25 8 710
tle Scrapers
regulationfront and rear
d Protective engine covering PRE 620 29 010 050219 Sa02
d rear 52device
Single point lifting
Technical Data BOMAG
covering
Safety control Technical Data
BOMAG BW 71 E-2
device
Back-up drive protection
Dimensions inDimensions
mm in mm
protection
on
teering
dampened
rod steering rod B C1 C2 BD C1 H C2 L DO1 HO2 L S O1 W O2 S W
ring
adjustable
rod steeringBW 71rodE-2 BW 71825E-2190 450 825 600 190 1245450 2200600 115 1245
25 2200
8 115
710 25 8 710
on
egulation
and throttle regulation
steering rod
Light Equipment
arrs front and rear
ering
ive engine covering
ice
point lifting device
TECHNICAL DATA
Technical DataTechnical Data BOMAG BOMAG
control BW 71 E-2 BW 71 E-2
on
p drive protection
drtrear
bars front andWeights
rear Weights
Warranty Operating weight CECE ...........................................
Operating kg 488
weight CECE ........................................... kg 488
Basic weight ............................................................. kg 471
Basic weight ............................................................. kg 471
Equipment Static
Static linear load CECE linear
........................................... kg/cm 7,0
load CECE ........................................... kg/cm 7,0
Dimensions Dimensions
rtg wheel+Parking
brake brake width ..........................................................
Working mm 710
Working width .......................................................... mm 710
t
l painting Driving Characteristics
Driving Characteristics
e Kit Speed (1), forward
Speed...................................................
(1), forward ...................................................
km/h 0- 1,6 km/h 0- 1,6
nmentally
liant Speed (1), reverse
compliant Speed...................................................
(1), reverse ...................................................
km/h 0- 1,6 km/h 0- 1,6
3lic oil Speed (2), forward
Speed...................................................
(2), forward ...................................................
km/h 0- 2,5 km/h 0- 2,5
H WARRANTY Speed (2), reverse
Speed...................................................
(2), reverse ...................................................
km/h 0- 2,5 km/h 0- 2,5
0,136 Max. gradeability without/with
Max. gradeability vibr. ..........................
without/with % 25/20
vibr. .......................... % 25/20
0,167 Drive Drive
Engine manufacturer Engine................................................ Hatz
manufacturer ................................................ Hatz
Type ......................................................................... 1B 20
Type ......................................................................... 1B 20
Emission stageEmission ......................................................... Stage V
stage ......................................................... Stage V
Cooling ..................................................................... air
Cooling ..................................................................... air
Number of cylinders Number ................................................. 1
of cylinders ................................................. 1
Performance ISO 3046 ............................................
Performance kW 3,4
ISO 3046 ............................................ kW 3,4
ng bow, Speed ....................................................................... min-1 3.200 min-1
Speed ....................................................................... 3.200
Fuel .......................................................................... Diesel
Fuel .......................................................................... Diesel
Starting device Starting
......................................................... El.-starter
device ......................................................... El.-starter
dle Drive system ............................................................
Drive hydrost.
system ............................................................ hydrost.
Dimensions in mm
e plate Fuel comsump.Fuel aver.comsump.
during operation
aver. during....................
operationl/h 0,8
.................... l/h 0,8
w oil H H1 H2 L L1 W
Exciter systemExciter system
BP 10/35
Drive 658 ............................................................
962 700 1084 532 350
system ............................................................
Drive system mech. mech.
Frequency ................................................................ 75
Frequency ................................................................
Hz Hz 75
BP 12/40 .................................................................
Amplitude Amplitude 658 962 700 1084 542 mm 400 0,43 mm
................................................................. 0,43
Centrifugal force .......................................................
Centrifugal force .......................................................
kN 16 kN 16
Sprinkler System
Sprinkler System
Technical Data
Type of sprinkling .....................................................
Type gravity
of sprinkling ..................................................... gravity
BOMAG BOMAG
Capacities Capacities
Fuel ..........................................................................
Fuel ..........................................................................
l 5,1 l BP
5,1 10/35 BP 12/40
Water .......................................................................
Water .......................................................................
l 25,0 l 25,0
Weights
Technical modifications reserved.
TechnicalMachines
modifications
mayreserved.
be shownMachines
with options.
may be shown with options.
Operating weight CECE ........................................... kg 65 72
Basic weight ............................................................. kg 64 71
Dimensions
Working width .......................................................... mm 350 400
Driving Characteristics
Working speed, max. ............................................... m/min 25 25
Max. gradeability (dep. on soil con.) ........................ % 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
BOMAG BOMAG
Cooling ..................................................................... air air
Hellerwald Hellerwald
Number of cylinders D-56154 .................................................
BoppardD-56154 Boppard 1 1
Performance SAE P.O. JBox1349
5162........................................
P.O. Box 5162 kW 2,6 2,6
Speed .......................................................................
Tel. (0)6742 - 1000Tel. (0)6742 - 1000 min-1 3.600 3.600
Fax (0)6742 - 3090 Fax (0)6742 - 3090
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
9 010 050219 Sa02 050219 Sa02
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
53
Shipping dimensions in m3
BW 65 H 1,609
BW 75 H 2,769
BW 65 H, BW 75 H
Mechanical vibration drive
Dimensions in mm
Electric starter
Infinitely variable speed control A
Sprinkler system BW 65 H 5
Vibration dampened steering rod BW 75 H 6
Height adjustable steering rod
Vibration and throttle regulation
on the steering rod
Technical Data
2 scrapers per drum
Automatic shutdown at low oil
level (BW65H)
Single point lifting device Weights
Safety crank handle (BW65H) Operating weight C
* Safety control Basic weight ..........
* Back-up drive protection Average axle load C
* Parking brake Average static linea
3-2-1 Warranty Dimensions
Overall length, min.
Optional Equipment
Driving Characteri
Parking brake Speed (1), forward
Tool kit Speed (1), reverse
Special painting Max. gradeability w
Service Kit Drive
US Version EPA 4 NRTC Engine manufacture
(BW65H) Type ......................
TOUGH WARRANTY Emission stage ......
Cooling ..................
Number of cylinders
* Standard delivery with CE Performance ISO 3
conformity (valid within Speed ....................
European Union) Fuel .......................
(+5kg) Drive system .........
Driven drum ...........
Fuel comsump. ave
Fields of application: Brakes
Earthwork and asphalt applications. Service brake ........
Parking brake ........
New construction and repairs of sidewalks, hard Exciter system
shoulders, cycle paths, yards and drive ways, Vibrating drum .......
Drive system .........
children playgrounds, tennis and sports grounds as Frequency .............
Amplitude ..............
well as agricultural and forestry road construction. Centrifugal force ....
Sprinkler System
Type of sprinkling ..
PRE 834 09 010
Capacities
Fuel .......................
Water .....................
Technical modifications reserve
ing dimensions in m3
5 H in m3
ions 1,609
5H 1,609 2,769
2,769
ard Equipment
ent
drostatic drive
uble vibration
e
echanical vibration drive B
n Dimensions in mm H
ectric starter
ration drive
nitely variable speed control A B C D H H1 K L L1 O S W D
Dimensions in mm P
rinkler system BW 65 H
e speed control A B C550 D762 H200 H1
400 K960 L1210L1
110 O2200S2320W20 8 650
T
bration dampened steering rod
m BW 75 H 620 400
865 960
250 1210
500 110
11002200
11592320
128 2029108 3010650
20 10 750 F
ight adjustable steeringBW rod65 H 550 762 200
ened steering
bration rod regulation
and throttle BW 75 H 620 865 250 500 1100 1159 128 2910 3010 20 10 750
ble PRE 834 09 010 050219 Sa02
thesteering
steeringrodrod
per drum 54
hrottle regulation Technical Data BOMAG BOMAG
crapers
rod
tomatic shutdown at low oil
Technical Data BOMAG BW 65BOMAG
H BW 75 H
drum
el (BW65H)
Dimensions inDimensions mm Dimensions
in mm in mm
c starter
Electric starter
dy variable
control
Infinitely
speed
variable speed controlA
control B C AD BH A CH1 B DK C HL D H1L1 H KO H1 LS K L1W L O L1
S O
W S W
er system
Sprinkler system
BW 65 H BW 65 550H 762 BW 65 200H 550 400 762 960 550200
1210762400
110 200960
22004001210
2320960110
20 12102200
8 1102320
650 2200
20 2320
8 20
650 8 650
on
teering
dampened
Vibration
rod dampened
steering
BW 75 H
rodsteering rod
BW 75 620H 865 BW 75 250H 620 500 865 1100620250
1159865500
128 2501100
29105001159
30101100
128
20 11592910
10 128
3010
750 2910
20 3010
10 20
750 10 750
ring
adjustable
Height
rod steering
adjustable rodsteering rod
Light Equipment
onegulation
and
Vibration
throttleand
regulation
throttle regulation
steering
on the
pers 2per scrapers
drum per drum
TECHNICAL DATA
rodsteering rod
Technical DataTechnical Technical Data Data BOMAG BOMAGBOMAG BOMAGBOMAG BOMAG
atic
t lowshutdown
Automatic
oil at
shutdown
low oil at low oil BW 65 H BW BW H 65 HBW 75 H BW 75 H
65 H75 BW
BW65H) level (BW65H)
ice
pointSingle
lifting point
devicelifting device Weights Weights
Weights
BW65H)
crankSafety
handlecrankOperating
(BW65H) weight
handle (BW65H) Operating weight
Operating CECE kg 757
...........................................
weight CECE ...........................................
CECE ........................................... kg 757kg1.040 757 1.040 1.040
y control
* Safety control Basic weight kg 727
.............................................................
Basic weight .............................................................
Basic weight ............................................................. kg 727kg1.010 727 1.010 1.010
-up
tiondrive
* Back-up Average
protection
drive axle load
protection Average
CECEaxle load CECE
Average axle load kg 379
.........................................
CECE .........................................
......................................... kg 379kg520 379 520 520
ng brake
* Parking brakeAverage static Average
linear load static
Average
CECE linear load
static CECE
linear load
.............................. kg/cm 5,8
..............................
CECE kg/cm 5,8
.............................. 6,9
kg/cm 5,8 6,9 6,9
Warranty
3-2-1 Warranty Dimensions Dimensions Dimensions
Overall length, min. Overall ..................................................
length,
Overallmin.length, mm 1.230 mm
..................................................
min. ..................................................1.2301.360 1.230 1.360
mm 1.360
Equipment
Optional Equipment
Driving CharacteristicsDriving Characteristics
Driving Characteristics
g brakeParking brake Speed (1), forward Speed ...................................................
(1), Speed
forward(1), km/h 0- 5,5 km/h 0- 5,5
...................................................
forward ................................................... 0- 5,0 0- 5,5 0- 5,0
km/h 0- 5,0
3t Tool kit Speed (1), reverse Speed ...................................................
(1), Speed
reverse(1), km/h 0- 2,5 km/h 0- 2,5
...................................................
reverse ................................................... 0- 2,5 0- 2,5 0- 2,5
km/h 0- 2,5
l painting Max.
Special painting gradeability Max.without/with
gradeability
Max. vibr. ..........................
without/with
gradeability vibr. ..........................
without/with % vibr. 40/35 % %
40/35
.......................... 40/35 40/35 40/35 40/35
0,136
e Kit Service Kit Drive Drive Drive
rsion
TC US EPA Version
4 NRTC
0,167 EPA 4 manufacturer
Engine NRTC Engine................................................
manufacturer
Engine manufacturer ................................................ HatzYanmarHatz
................................................
Hatz Yanmar Yanmar
H) (BW65H) Type .........................................................................
Type .........................................................................
Type .........................................................................
1D 42 1D 42L100 1D 42 L100 L100
H WARRANTY
TOUGH WARRANTY Emission stageEmission .........................................................
stage
Emission .........................................................
stage .........................................................
Stage V StagenonV EPAStage V non EPA non EPA
Cooling .....................................................................
Cooling .....................................................................
Cooling .....................................................................
air air air air air air
Number of cylinders Number .................................................
of Number
cylindersof.................................................
cylinders .................................................
1 1 1 1 1 1
dard
th CE *delivery
Standard Performance
with
delivery
CE with CE ISO 3046 ............................................
Performance ISO 3046 ............................................
Performance kW 6,2 kW
ISO 3046 ............................................ 6,2kW6,2 6,2 6,2 6,2
mity
n conformity Speedwithin
(valid within(valid ....................................................................... min-1 2.800 min-1 2.800
Speed .......................................................................
Speed ....................................................................... 3.100 2.800 3.100
min-1 3.100
ng
ean bow,
Union)
European Union)Fuel ..........................................................................
Fuel ..........................................................................
Fuel ..........................................................................
Diesel Diesel Diesel Diesel
Diesel Diesel
(+5kg) Drive system ............................................................
Drive system Drive............................................................
system ............................................................
hydrost. hydrost.
hydrost. hydrost. hydrost. hydrost.
Driven drum .............................................................
Driven drum .............................................................
Driven drum .............................................................
front + rear frontfront + front
+ rearrear + rear
front + rearfront + rear
dle Fuel comsump.Fuel aver. during
comsump. Fueloperation
aver. during
comsump. ....................
operation
aver. during ....................
l/h operation l/h
1,3 .................... 1,5
1,3l/h 1,3 1,5 1,5
Dimensions in mm
e plate
Brakes Brakes H Brakes H1 H2 L L1 W
w oil Service brake ...........................................................
Service brake hydrost.
...........................................................
Service brake ........................................................... hydrost.hydrost. hydrost.
hydrost. hydrost.
Parking
BP 10/35brake ...........................................................
Parking brake 658 mech.
...........................................................
Parking962brake 700...........................................................
1084 532 350 mech.mech. mech. mech. mech.
Exciter
BP 12/40systemExciter system
Exciter
658 962system
700 1084 542 400
Vibrating drum Vibrating
..........................................................
drum ..........................................................
Vibrating front + rear
drum ..........................................................frontfront + front
+ rearrear + rear
front + rearfront + rear
Drive system ............................................................
Drive system ............................................................
Drive mech.
system ............................................................ mech.mech. mech. mech. mech.
Frequency ................................................................
Frequency Frequency ................................................................
................................................................
Hz 55 Hz 55 Hz55 55 55 55
Technical Data
Amplitude .................................................................
Amplitude .................................................................
Amplitude .................................................................
mm 0,45 mm BOMAG 0,45 0,50 0,45
mm 0,50BOMAG 0,50
Centrifugal force .......................................................
Centrifugal Centrifugal force .......................................................
force .......................................................
kN 22 kN 22 kN40 22 40 40
Sprinkler SystemSprinkler SystemSprinkler System
BP 10/35 BP 12/40
Type of sprinkling .....................................................
Type of sprinkling gravity
Type of..................................................... gravity gravity gravity
gravity
sprinkling ..................................................... gravity
Weights
Capacities weight
Operating Capacities CECE Capacities
........................................... kg 65 72
Fuel ..........................................................................
Basic weightFuel ..........................................................................
l
.............................................................
Water .......................................................................
Water
5,0
60,0 kgl
.......................................................................
l
l 5,0l 5,5
Fuel ..........................................................................
64
60,0
Water .......................................................................
5,0
l 60,0 60,0
5,5
60,071
5,5
60,0
Technical modifications reserved.
TechnicalMachines
modifications
Technical
mayreserved.
be modifications
shownMachines
with options.
reserved.
may beMachines
shown with
mayoptions.
be shown with options.
Dimensions
Working width .......................................................... mm 350 400
Driving Characteristics
Working speed, max. ............................................... m/min 25 25
Max. gradeability (dep. on soil con.) ........................ % 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
BOMAG BOMAG BOMAG
Cooling ..................................................................... air air
Hellerwald Hellerwald Hellerwald
Number of cylinders D-56154 .................................................
BoppardD-56154 Boppard
D-56154 Boppard 1 1
Performance SAE P.O. JBox1349
5162........................................
P.O. Box 5162 P.O. Box 5162 kW 2,6 2,6
Tel. (0)6742 - 1000Tel. (0)6742 Tel. (0)6742 - 1000 min-1
Speed .......................................................................
- 1000 3.600 3.600
Fax (0)6742 - 3090 Fax (0)6742 Fax- 3090
(0)6742 - 3090
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
9 PRE
010 834 09050219
010 Sa02 050219 Sa02050219 Sa02
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
55
Shipping dimensions in m3
BMP 8500 2,056
BMP 8500
ECOMODE
Drum extensions (610/850mm)
Hydrostatic articulated steering,
Dimensions in mm
maintenance free
Combination remote control A
cable/radio BMP 8500 1
Dual directed-vibration system
Two travel speed ranges
2 amplitudes
Intelligent Vibration Control
Technical Data
(IVC)
Electric starter
BOMAG Operator Safety
System Weights
2 scrapers per drum Operating weight C
Battery disconnect switch Basic weight ..........
Automatic shutdown at low oil Average axle load C
level Driving Characteri
Automatic engine shut down at a Speed (1), forward
lateral tipping angle of 45° Speed (1), reverse
Full prot. hoods made of impact Speed (2), forward
resistant compound material Speed (2), reverse
Single point lifting device Max. gradeability w
Lockable engine cover and dash
board Drive
Easy Service Concept Engine manufacture
-Diagnostic module with fault Type ......................
Emission stage ......
code display Cooling ..................
-Hour meter Number of cylinders
-foldable full protection hood Performance ISO 3
3-2-1 Warranty Speed ....................
Fuel .......................
Optional Equipment Drive system .........
Environmentally compliant Driven drum ...........
hydraulic oil Fuel comsump. ave
Smooth drum (-45kg Amplitude
1,59/0,86mm) Brakes
Fields of application: Special painting Service brake ........
Parking brake ........
Mobile quick charger
Earthwork. Scrapers 610/850mm Exciter system
Trench and sewer line construction, backfills and Service Kit
ECONOMIZER
Vibrating drum .......
Drive system .........
foundation work – wherever high demands are TOUGH WARRANTY Frequency .............
Amplitude ..............
placed on mobility, manoeuvrability and simple Centrifugal force ....
operation under severe soil conditions. Capacities
Fuel .......................
Technical modifications reserve
Shipping dimensions in m3
BMP
ensions in 8500
m3 2,056
2,056
Standard Equipment
uipment
ECOMODE
Drum extensions (610/850mm)
E Hydrostatic articulated steering, B
nsions (610/850mm) Dimensions in mm H
maintenance free
articulated steering, remote control
Combination A D H K L S W W1 D
Dimensions in mm P
ce free cable/radio
n remoteDual
control ABMP D
8500 H K 1000
L 520S 1275
W 197W11897 16 850 610
T
directed-vibration system
F
Two travel speed BMP 8500
ranges 1000 520 1275 197 1897 16 850 610
ed-vibration system
2 amplitudes
speed ranges PRE 720 12 010 120918 Sa03
Intelligent Vibration Control
es (IVC) 56 Technical Data BOMAG
Vibration Control
Electric starter Technical Data
BOMAG BMP 8500
BOMAG Operator Safety
Dimensions inDimensions
mm in mm
nance free
nation
ontrol remote control A D H AK DL HS KW L W1 S W W1
adio BMP 8500 BMP10008500 520 12751000 197 520 18971275 16 197 850 1897 610 16 850 610
nrected-vibration
system system
avel
es speed ranges
Light Equipment
itudes
ontrol
ent Vibration Control
TECHNICAL DATA
Technical DataTechnical Data BOMAG BOMAG
c starter BMP 8500 BMP 8500
G
etyOperator Safety
m Weights Weights
pers per drum Operating weight CECE ...........................................
Operating kg
weight CECE ...........................................1.595 kg 1.595
itch Basic weight .............................................................
disconnect switch kg 1.585 kg
Basic weight ............................................................. 1.585
atic
t lowshutdown
oil Average
at low oil axle Average
load CECE axle load CECE
......................................... kg 798
......................................... kg 798
Driving Characteristics
Driving Characteristics
atic
downengine
at a shutSpeed
down at (1),a forwardSpeed ...................................................
(1), forward ...................................................
km/h 1,2 km/h 1,2
tipping
45° angle of Speed45° (1), reverse Speed ...................................................
(1), reverse ...................................................
km/h 1,2 km/h 1,2
ot.of hoods
impactmade Speed
of impact(2), forward Speed ...................................................
(2), forward ...................................................
km/h 2,8 km/h 2,8
nt
aterial
compound material
Speed (2), reverse Speed ...................................................
(2), reverse ...................................................
km/h 2,8 km/h 2,8
ice
point lifting device
Max. gradeability Max.without/with
gradeability vibr. ..........................
without/with 55/45 %
vibr. ..........................
% 55/45
ble
3r and engine
dashcover and dash
Drive Drive
0,136 Engine manufacturer
ervice Concept Engine................................................ Kubota
manufacturer ................................................ Kubota
ostic
th faultmodule withType
fault......................................................................... D 1005
Type ......................................................................... D 1005
isplay
0,167 Emission stageEmission ......................................................... Stage V / TIER4f
stage ......................................................... Stage V / TIER4f
Cooling ..................................................................... water
Cooling ..................................................................... water
meter Number of cylinders Number 3
of cylinders .................................................
................................................. 3
nlehood
full protectionPerformance
hood Performance
ISO 14,5 kW
ISO 3046 ............................................
3046 ............................................ kW 14,5
Warranty min-1 2.600 min-1 2.600
Speed .......................................................................
Speed .......................................................................
Diesel
Fuel ..........................................................................
Fuel .......................................................................... Diesel
Equipment Drive system ............................................................ hydrost.
Drive system ............................................................ hydrost.
ng bow, compliant
nmentally
liant 4
Driven drum .............................................................
Driven drum ............................................................. 4
lic oil Fuel comsump.Fuel aver.comsump. aver. during
during operation operationl/h
.................... 3,1
.................... l/h 3,1
Amplitude
h drum (-45kg Amplitude
dle Brakes Brakes
86mm) Dimensions in mm
el painting
plate Service brake ........................................................... hydrost.
Service brake ........................................................... hydrost.
oil charger Parking brake ...........................................................
wquick Parking brake L1 Whydromec.
H ...........................................................
H1 H2 L hydromec.
rs 610/850mm BP Exciter
10/35 system Exciter system
658 962 700 1084 532 350
e Kit Vibrating drum Vibrating
.......................................................... front + rear
drum .......................................................... front + rear
OMIZER BP 12/40
Drive 658 ............................................................
962 700 1084 542 400
system ............................................................
Drive system hydraulic hydraulic
H WARRANTY Frequency ................................................................
Frequency ................................................................
Hz 42/42 Hz 42/42
Amplitude ................................................................. 1,12/0,56
Amplitude .................................................................
mm mm 1,12/0,56
Centrifugal force .......................................................
Centrifugal kN 72/36 kN
force ....................................................... 72/36
Technical Data BOMAG BOMAG
Capacities Capacities
Fuel .......................................................................... l 24,0 l
Fuel .......................................................................... 24,010/35
BP BP 12/40
Technical modifications reserved.
TechnicalMachines
modifications
mayreserved.
be shownMachines
with options.
may be shown with options.
Weights
Operating weight CECE ........................................... kg 65 72
Basic weight ............................................................. kg 64 71
Dimensions
Working width .......................................................... mm 350 400
Driving Characteristics
Working speed, max. ............................................... m/min 25 25
Max. gradeability (dep. on soil con.) ........................ % 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
BOMAG BOMAG
Cooling ..................................................................... air air
Hellerwald Hellerwald
Number of cylinders D-56154 .................................................
Boppard D-56154 Boppard 1 1
Performance SAE J 1349 ........................................
P.O. Box 5162 P.O. Box 5162 kW 2,6 2,6
Tel. (0)6742 - 1000 Tel. (0)6742 - 1000
Speed ....................................................................... min-1 3.600 3.600
Fax (0)6742 - 3090 Fax (0)6742 - 3090
Drive system ............................................................ mech. mech.
2 010
Fuel ..........................................................................
120918 Sa03 120918 Sa03
Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
57
Shipping dimensions in m3
BMP 8500 2,056
BMP 8500
ECOMODE
Drum extensions (610/850mm)
Hydrostatic articulated steering,
Dimensions in mm
maintenance free
Combination remote control A
cable/radio BMP 8500 1
Dual directed-vibration system
Two travel speed ranges
2 amplitudes
Intelligent Vibration Control
Technical Data
(IVC)
Electric starter
BOMAG Operator Safety
System Weights
2 scrapers per drum Operating weight C
Battery disconnect switch Basic weight ..........
Automatic shutdown at low oil Average axle load C
level Driving Characteri
Automatic engine shut down at a Speed (1), forward
lateral tipping angle of 45° Speed (1), reverse
Full prot. hoods made of impact Speed (2), forward
resistant compound material Speed (2), reverse
Single point lifting device Max. gradeability w
Lockable engine cover and dash
board Drive
Easy Service Concept Engine manufacture
-Diagnostic module with fault Type ......................
Emission stage ......
code display Cooling ..................
-Hour meter Number of cylinders
-foldable full protection hood Performance ISO 3
3-2-1 Warranty Speed ....................
Fuel .......................
Optional Equipment Drive system .........
Environmentally compliant Driven drum ...........
hydraulic oil Fuel comsump. ave
Smooth drum (-45kg Amplitude
1,59/0,86mm) Brakes
Fields of application: Special painting Service brake ........
Parking brake ........
Mobile quick charger
Earthwork. Scrapers 610/850mm Exciter system
Trench and sewer line construction, backfills and Service Kit
ECONOMIZER
Vibrating drum .......
Drive system .........
foundation work – wherever high demands are TOUGH WARRANTY Frequency .............
Amplitude ..............
placed on mobility, manoeuvrability and simple Centrifugal force ....
operation under severe soil conditions. Capacities
Fuel .......................
Technical modifications reserve
Shipping dimensions in m3
BMP
ensions in 8500
m3 2,056
2,056
Standard Equipment
uipment
ECOMODE
Drum extensions (610/850mm)
E Hydrostatic articulated steering, B
nsions (610/850mm) Dimensions in mm H
maintenance free
articulated steering, remote control
Combination A D H K L S W W1 D
Dimensions in mm P
ce free cable/radio
n remoteDual
control ABMP D
8500 H K 1000
L 520S 1275
W 197W11897 16 850 610
T
directed-vibration system
F
Two travel speed BMP 8500
ranges 1000 520 1275 197 1897 16 850 610
ed-vibration system
2 amplitudes
speed ranges PRE 720 14 010 120918 Sa
Intelligent Vibration Control
es (IVC) 58 Technical Data BOMAG
Vibration Control
Electric starter Technical Data
BOMAG BMP 8500
BOMAG Operator Safety
Dimensions inDimensions
mm in mm
nance free
nation
ontrol remote control A D H AK DL HS KW L W1 S W W1
adio BMP 8500 BMP10008500 520 12751000 197 520 18971275 16 197 850 1897 610 16 850 610
nrected-vibration
system system
avel
es speed ranges
Light Equipment
itudes
ontrol
ent Vibration Control
TECHNICAL DATA
Technical DataTechnical Data BOMAG BOMAG
c starter BMP 8500 BMP 8500
G
etyOperator Safety
m Weights Weights
pers per drum Operating weight CECE ...........................................
Operating kg
weight CECE ...........................................1.595 kg 1.595
itch Basic weight .............................................................
disconnect switch kg 1.585 kg
Basic weight ............................................................. 1.585
atic
t lowshutdown
oil Average
at low oil axle Average
load CECE axle load CECE
......................................... kg 798
......................................... kg 798
Driving Characteristics
Driving Characteristics
atic
downengine
at a shutSpeed
down at (1),a forwardSpeed ...................................................
(1), forward ...................................................
km/h 1,2 km/h 1,2
tipping
45° angle of Speed45° (1), reverse Speed ...................................................
(1), reverse ...................................................
km/h 1,2 km/h 1,2
ot.of hoods
impactmade Speed
of impact(2), forward Speed ...................................................
(2), forward ...................................................
km/h 2,8 km/h 2,8
nt
aterial
compound material
Speed (2), reverse Speed ...................................................
(2), reverse ...................................................
km/h 2,8 km/h 2,8
ice
point lifting device
Max. gradeability Max.without/with
gradeability vibr. ..........................
without/with 55/45 %
vibr. ..........................
% 55/45
ble
3r and engine
dashcover and dash
Drive Drive
0,136 Engine manufacturer
ervice Concept Engine................................................ Kohler
manufacturer ................................................ Kohler
ostic
th faultmodule withType
fault......................................................................... KDW 1003
Type ......................................................................... KDW 1003
isplay
0,167 Emission stageEmission ......................................................... Stage V / TIER4f
stage ......................................................... Stage V / TIER4f
Cooling ..................................................................... water
Cooling ..................................................................... water
meter Number of cylinders Number 3
of cylinders .................................................
................................................. 3
nlehood
full protectionPerformance
hood Performance
ISO 12,8 kW
ISO 3046 ............................................
3046 ............................................ kW 12,8
Warranty min-1 2.600 min-1 2.600
Speed .......................................................................
Speed .......................................................................
Diesel
Fuel ..........................................................................
Fuel .......................................................................... Diesel
Equipment Drive system ............................................................ hydrost.
Drive system ............................................................ hydrost.
ng bow, compliant
nmentally
liant 4
Driven drum .............................................................
Driven drum ............................................................. 4
lic oil Fuel comsump.Fuel aver.comsump. aver. during
during operation operationl/h
.................... 3,2
.................... l/h 3,2
Amplitude
h drum (-45kg Amplitude
dle Brakes Brakes
86mm) Dimensions in mm
el painting
plate Service brake ........................................................... hydrost.
Service brake ........................................................... hydrost.
oil charger Parking brake ...........................................................
wquick Parking brake L1 Whydromec.
H ...........................................................
H1 H2 L hydromec.
rs 610/850mm BP Exciter
10/35 system Exciter system
658 962 700 1084 532 350
e Kit Vibrating drum Vibrating
.......................................................... front + rear
drum .......................................................... front + rear
OMIZER BP 12/40
Drive 658 ............................................................
962 700 1084 542 400
system ............................................................
Drive system hydraulic hydraulic
H WARRANTY Frequency ................................................................
Frequency ................................................................
Hz 42/42 Hz 42/42
Amplitude ................................................................. 1,12/0,56
Amplitude .................................................................
mm mm 1,12/0,56
Centrifugal force .......................................................
Centrifugal kN 72/36 kN
force ....................................................... 72/36
Technical Data BOMAG BOMAG
Capacities Capacities
Fuel .......................................................................... l 24,0 l
Fuel .......................................................................... 24,010/35
BP BP 12/40
Technical modifications reserved.
TechnicalMachines
modifications
mayreserved.
be shownMachines
with options.
may be shown with options.
Weights
Operating weight CECE ........................................... kg 65 72
Basic weight ............................................................. kg 64 71
Dimensions
Working width .......................................................... mm 350 400
Driving Characteristics
Working speed, max. ............................................... m/min 25 25
Max. gradeability (dep. on soil con.) ........................ % 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
BOMAG BOMAG
Cooling ..................................................................... air air
Hellerwald Hellerwald
Number of cylinders D-56154 .................................................
Boppard D-56154 Boppard 1 1
Performance SAE J 1349 ........................................
P.O. Box 5162 P.O. Box 5162 kW 2,6 2,6
Tel. (0)6742 - 1000 Tel. (0)6742 - 1000
Speed ....................................................................... min-1 3.600 3.600
Fax (0)6742 - 3090 Fax (0)6742 - 3090
Drive system ............................................................ mech. mech.
4 010
Fuel ..........................................................................
120918 Sa 120918 Sa
Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
59
60
TABLE OF CONTENTS
Asphalt
BW 100 AD-5, BW 120 AD-5 70 BW 115 AC-5, BW 131 ACW-5 134
BW 100 SL-5, BW 120 SL-5 72 BW 138 AC-5 136
BW 100 SL-5, BW 120 SL-5 74 BW 138 AC-5 138
BW 131 AD-5 76 BW 151 AC-5, BW 161 AC-5 140
BW 135 AD-5, BW 138 AD-5 78 BW 154 ACP-4V, BW 174 ACP-4F 142
BW 135 AD-5, BW 138 AD-5 80 BW 154 ACP-4V AM, BW 174 ACP-4F AM 144
BW 141 AD-5, BW 151 AD-5, BW 154 AD-5 82 BW 151 AC-50, BW 161 AC-50 146
BW 151 AD-5 H, BW 151 AD-5 SH, BW 154 AD-5 SH 84
BW 161 AD-5, BW 190 AD-5, BW 202 AD-5 86 Pneumatic Tyred Rollers
BW 191 AD-5, BW 206 AD-5 88 BW 11 RH-5 - Tier 3 148
BW 151 AD-5 AM, BW 161 AD-5 AM 90 BW 11 RH-5 - Tier 4 final 150
BW 191 AD-5 AM, BW 206 AD-5 AM 92 BW 24 RH, BW 27 RH 152
BW 161 ADO-5, BW 190 ADO-5, BW 202 ADO-5 94 BW 28 RH 154
BW 191 ADO-5, BW 206 ADO-5 96 BW 28 RH 156
BW 141 AD-50, BW 151 AD-50 98
BW 151 AD-50 H, BW 151 AD-50 SH 100 Paver
BW 161 AD-50, BW 202 AD-50, BW 206 AD-50 102 BF 223 C 158
BW 161 AD-50 AM, BW 191 AD-50 AM, BF 300 C 160
BW 206 AD-50 AM 104 BF 300 P 162
BW 161 ADO-50, BW 202 ADO-50 106 BF 300 C-2 164
BW 154 AP-4V, BW 174 AP-4F 108 BF 300 P-2 166
BW 174 HYBRID 110 BF 600 C-2 - Tier 3 168
BW 154 APO-4V, BW 174 APO-4F 112 BF 600 C-2 - Tier 4f 170
BW 154 AP-4V AM, BW 174 AP-4F AM 114 BF 600 P-2 - Tier 3 172
BW 161 AD-4 116 BF 600 P-2 - Tier 4f 174
BW 202 AD-4, BW 203 AD-4 118 BF 700 C-2 - Tier 3 176
BW 203 ADO-4 120 BF 700 C-2 - Tier 4f 178
BW 203 AD-4 AM 122 BF 800 C - Tier 3 180
BW 205 AD-4 124 BF 800 C-2 - Tier 4 182
BF 800 P - Tier 3 184
BF 900 C - Tier 3 186
BMF 2500 - Tier 3 188
BMF 2500 - Tier 4 190
61
TANDEM ROLLERS Standard Equipment
Hydrostatic travel and vibration drive
Opti
RO
62
TECHNICAL DATA
Technical Data Technical
Technical
Data
Technical
BOMAG
Data Data BOMAGBOMAGBOMAG BOMAG
BOMAG
BOMAG BOMAG BOMAG BOMAG BOMAGBOMAG
BW 80 AD-5 BW 90BW
AD-5
80BW
AD-5
80BWAD-5
BW
80 AD-5
100
BW ADM-5
90BW
AD-5
90BWAD-5
90 AD-5
BW 100
BWADM-5
100
BWADM-5
100 ADM-5
Weights Weights
Weights
Weights
Operating weight CECE ....................Operating Operating
kgweightOperating
CECE
weight
1.550 ....................
CECE
weight.................... kg 1.600
CECE .................... kg 1.550
kg 1.550 1.5501.700 1.600 1.600 1.600 1.700 1.700 1.700
Average static linear load CECE .......AverageAverage kg/cm
static linear
Average
static
load
9,7 linear
static
CECE loadlinear
.......
CECE load.......
CECEkg/cm 8,9 kg/cm
....... 9,7
9,7 kg/cm 9,7 8,5 8,9 8,9 8,9 8,5 8,5 8,5
Grossweight
kg ......................................
Grossweight ......................................Grossweight Grossweight
......................................
1.900 kg 1.900
...................................... kg 1.900
kg 1.900 1.9001.900 1.900 1.900 1.900 1.900 1.900 1.900
Dimensions Dimensions
Dimensions
Dimensions
Working width ....................................WorkingWorking
mm
width ....................................
Working
width 800....................................
width ....................................
mm 900mm 800mm 800 800 1.000 900 900 900 1.000 1.000 1.000
Track radius, inner ............................Track radius,
Track
mm inner
radius,
Track
............................
2.080
inner
radius,............................
inner ............................
mm 2.030 mm 2.080
mm 2.080 2.0801.980 2.030 2.030 2.030 1.980 1.980 1.980
Driving Characteristics Driving
Driving
Characteristics
Driving
Characteristics
Characteristics
Speed ................................................Speed ................................................
Speed
km/h ................................................
Speed 0- 10,0 km/h0- 10,0
................................................ 0- 10,0 0- 10,0 0- 10,0 0- 10,0
km/h0- 10,0 0- 10,0
km/h0- 10,0 0- 10,0 0- 10,0 0- 10,0
Working speed with vibration ............WorkingWorking km/h
speed with Working
speed0-
vibration
10,0
with
speedvibration
............
with vibration
............km/h 0- 10,0
............ 0- 10,0 0- 10,0 0- 10,0 0- 10,0
km/h0- 10,0 0- 10,0
km/h0- 10,0 0- 10,0 0- 10,0 0- 10,0
3
Asphalt
Max. gradeability without/with vibr. ...Max. gradeability Max.
% gradeability
Max.
without/with
40/30
gradeability
without/with ... vibr. ...%vibr.40/30
vibr.without/with ...% 40/30 % 40/30 40/3040/30 40/30 40/30 40/30 40/30 40/30 40/30
0,136 Drive Drive Drive Drive
Engine manufacturer .........................Engine manufacturerEngine manufacturer
Engine .........................
Kubotamanufacturer
......................... Kubota Kubota
......................... Kubota Kubota Kubota Kubota Kubota Kubota Kubota Kubota Kubota
0,167 Type ..................................................Type ..................................................
Type ..................................................
Type D 902 D 902
D ..................................................
902 D 902 D 902 D 902 D 902 D 902 D 902 D 902 D 902 D 902
Emission stage ..................................EmissionEmission
stage ..................................
Emission
stage
Stage ..................................
stage
V / TIER4f Stage VStage
.................................. V Stage
/ TIER4f V Stage
/ TIER4f Stage
/ TIER4f VStage
/ TIER4f
V / TIER4f V Stage V Stage
/ TIER4f V / TIER4f
/ TIER4f Stage V Stage
/ TIER4f
V Stage
/ TIER4f
V / TIER4f
Cooling ..............................................Cooling Cooling
..............................................
Cooling
.............................................. water water water waterwater water water water
water.............................................. water water water
Number of cylinders ..........................Number Number of cylindersNumber
of cylinders
..........................
3 of cylinders.......................... 3
.......................... 3 3 3 3 3 3 3 3 3 3
Performance ISO 14396 ...................Performance Performance
kW ISOPerformance
14396 ISO...................
15,1 14396 ISO................... kW 15,1kW 15,1kW 15,1
14396 ................... 15,1 15,1 15,1 15,1 15,1 15,1 15,1 15,1
Performance SAE J 1995 ..................Performance Performance
hp SAE Performance
J 1995
SAE..................
20,2 J 1995SAE.................. hp 20,2hp 20,2hp 20,2
J 1995 .................. 20,2 20,2 20,2 20,2 20,2 20,2 20,2 20,2
ng bow, Speed ................................................Speed ................................................
Speed
min-1 ................................................
Speed 3.000 min-13.000
................................................min-1 min-1
3.000 3.000 3.0003.000 3.000 3.000 3.000 3.000 3.000 3.000
Speed adjustment 1 ..........................Speed adjustment Speed
min-1 adjustment
Speed
1 ..........................
2.100adjustment
1 .......................... min-12.100
1 ..........................min-1 min-1
2.100 2.100 2.1002.100 2.100 2.100 2.100 2.100 2.100 2.100
Speed adjustment 2 ..........................Speed adjustment Speed
min-1 adjustment
Speed
2 ..........................
3.000adjustment
2 .......................... min-13.000
2 ..........................min-1 min-1
3.000 3.000 3.0003.000 3.000 3.000 3.000 3.000 3.000 3.000
dle
Dimensions in mm
Electric equipment ............................. Electric equipment
Electric
V equipment
Electric
.............................
12 equipment
.............................V 12 V 12 V 12
............................. 12 12 12 12 12 12 12 12
e plate Driven drum .......................................Driven drumDriven .......................................
drum
Driven .......................................
front drum
+ rear front + rear
....................................... front + rear front front
front + rear + rear
+ rear front + rear front + rear front + rear
front + rear front + rear
front + rear
w oil H H1 H2 L L1 W
Brakes BrakesBrakesBrakes
BP 10/35
Service 658 Service
brake .................................... 962 brake
700....................................
Service 1084
brake
Service
hydrost. 532....................................
350
....................................
brake hydrost.hydrost. hydrost. hydrost.
hydrost.hydrost. hydrost. hydrost. hydrost. hydrost. hydrost.
Parking brake ....................................Parking Parking
BP 12/40 658 962 brake 700....................................
Parking
brakehydromec.
1084 ....................................
brake ....................................
542 400 hydromec.
hydromec.
hydromec.
hydromec.
hydromec.
hydromec.
hydromec.
hydromec. hydromec.hydromec.hydromec.
Steering Steering
Steering
Steering
Steering system ................................SteeringSteering
system Steering
................................
system
oscil.artic.
................................ oscil.artic.
system ................................ oscil.artic.
oscil.artic. oscil.artic.
oscil.artic. oscil.artic. oscil.artic.
oscil.artic. oscil.artic.
oscil.artic.
oscil.artic.
Steering method ................................SteeringSteering
methodSteering
................................
method
hydrost. ................................ hydrost.hydrost. hydrost. hydrost.
method ................................ hydrost.hydrost. hydrost. hydrost. hydrost. hydrost. hydrost.
Technical Data
Steering / oscillating angle +/- ...........SteeringSteering
/ oscillating
grad Steering
/ oscillating
angle
33/8 / oscillating
+/-angle
...........
+/-angle
...........
+/-
grad BOMAG
33/8grad
........... 33/8grad 33/8 33/8 33/8 BOMAG 33/8
33/8 33/8 33/8 33/8 33/8
Crab walk ..........................................Crab walk
Crab
..........................................
walkCrab ..........................................
0-walk 0- 50 0- 50 0- 50 0- 500- 50 0- 50 0- 50 0- 50
50 .......................................... 0- 50 0- 50 0- 50
BP 10/35 BP 12/40
Exciter system ExciterExciter
system
Exciter
systemsystem
Vibrating drum ...................................VibratingVibrating +drum
drum ...................................
Vibrating
drumfront ................................... front + rear
rear ................................... front + rear front front
front + rear + rear
+ rear front + rear front + rear
front + rear front + rear
front + rear
front + rear
Weights
Drive system .....................................Drive system
Drive .....................................
system
Drive hydrost.
.....................................
system ..................................... hydrost.hydrost. hydrost. hydrost.
hydrost.hydrost. hydrost. hydrost. hydrost. hydrost. hydrost.
Operating weight CECEFrequency
Frequency ......................................... ...........................................
Frequency
Hz .........................................
Frequency kg
.........................................Hz 42/63
42/63 ......................................... Hz 65 Hz 42/63 42/6342/63 72
42/63 42/63 42/63 42/63 42/63 42/63 42/63
Basic
Amplitudeweight .............................................................
..........................................
AmplitudeAmplitude
mm kg
mm 0,50mm64
0,50 ..........................................
..........................................
Amplitude
.......................................... 0,50mm 0,50 0,50 0,40 71 0,50 0,50 0,50 0,40 0,40 0,40
Centrifugal force ................................CentrifugalCentrifugal
kN forceCentrifugal7/17 ................................
................................
force kN 8/17kN 7/17kN 7/17
force ................................ 7/17 8/17 8/17 8/17 8/17 8/17 8/17 8/17
Dimensions
Sprinkler System Sprinkler
Sprinkler
System
Sprinkler
System System
Working width
Type of sprinkling ..........................................................
..............................
Type of sprinkling
Type of sprinkling
Type
..............................
pressure
of sprinkling mmpressure350
..............................
.............................. pressurepressurepressure 400 pressurepressure
pressurepressure pressurepressurepressure
Capacities Capacities
Capacities
Capacities
Driving CharacteristicsFuel ...................................................
Fuel ................................................... Fuel
l ...................................................
Fuel 30,0
...................................................
l 30,0l 30,0l 30,0 30,0 30,0 30,0 30,0 30,0 30,0 30,0 30,0
Working speed, max. ...............................................
Water .................................................Water .................................................
Water
l m/min
.................................................
Water 100,0
.................................................
l 100,0l 25 100,0 l 100,0 100,0100,0 25
100,0 100,0 100,0 100,0 100,0 100,0
Max. gradeability
Technical modifications reserved. Machines(dep. on
may be shown soil
Technical
with options. con.)
modifications
Technical ........................
modifications
reserved.
Technical
Machines
modifications
reserved.
mayMachines
be
reserved.
shownmay
with
Machines %
beoptions.
shownmaywith shown with 30
beoptions. options. 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
63
Standard Equipment Opti
TANDEM ROLLERS
Side-clearance roller (drum offset 60-100 RO
mm) *F
64
TECHNICAL
Technical Data
DATA
Technical
Technical
Data Data BOMAG BOMAG
BOMAG
BOMAG BOMAG BOMAG
BW 90 SC-5 BWBW
90 100
BW
SC-5SC-5
90 SC-5 BW 100BW 100 SC-5
SC-5
Weights Weights
Weights
Operating weight CECE Operating
...........................................
Operating
weight CECE weight kg...........................................
...........................................
CECE 1.650 kg kg 1.650
1.7001.650 1.700 1.700
Average static linear loadAverage
CECE ..............................
static
Average linear
static
load linear
CECE kg/cm
load..............................
CECE ..............................
9,2 kg/cm 9,2 8,5 9,2
kg/cm 8,5 8,5
Grossweight .............................................................
Grossweight Grossweight kg
.............................................................
.............................................................
1.900 kg kg 1.900
1.9001.900 1.900 1.900
Dimensions Dimensions
Dimensions
Working width ..........................................................
Working width Working ..........................................................
width ..........................................................
mm 960 mm mm9601.060960 1.060 1.060
Track radius, inner ...................................................
Track radius, Trackinnerradius,
...................................................
inner ...................................................
mm 2.000 mm mm2.000
1.9502.000 1.950 1.950
Driving Characteristics
DrivingDriving
Characteristics
Characteristics
Speed ....................................................................... km/h
Speed ....................................................................... km/h
Speed .......................................................................
0- 10,0 km/h
0- 10,0 0- 10,0
0- 10,0 0- 10,0 0- 10,0
Working speed with vibration Working ...................................
speed
Working withspeed
vibration km/h ...................................
with vibration
...................................
0- 10,0 km/h km/h
0- 10,0 0- 10,0
0- 10,0 0- 10,0 0- 10,0
3
Asphalt
Max. gradeability without/with Max. gradeability
vibr.Max.
..........................
gradeability
without/with % ..........................
without/with
vibr. vibr. 40/30 %
.......................... % 40/3040/3040/30 40/30 40/30
0,136 Drive Drive Drive
Engine manufacturer ................................................
Engine manufacturer
Engine manufacturer................................................
................................................
Kubota Kubota
Kubota Kubota Kubota Kubota
0,167 Type .........................................................................
Type .........................................................................
Type .........................................................................
D 902 D 902
D 902D 902 D 902 D 902
Emission stage .........................................................
EmissionEmissionstage .........................................................
stage .........................................................
Stage V / TIER4f Stage
Stage
V /Stage
TIER4f
V / TIER4f
V / TIER4f Stage V /Stage
TIER4fV / TIER4f
Cooling ..................................................................... water
Cooling .....................................................................
Cooling ..................................................................... water
water water water water
Number of cylinders .................................................
Number of Number
cylinders of cylinders 3
.................................................
................................................. 3 3 3 3 3
Performance ISO 14396 Performance ..........................................
Performance
ISO 14396 ISO kW..........................................
..........................................
14396 15,1 kW kW 15,115,1 15,1 15,1 15,1
Performance SAE J 1995Performance ........................................
Performance
SAE J 1995 hp ........................................
SAE........................................
J 1995 20,2 hp hp 20,220,2 20,2 20,2 20,2
ng bow, Speed ....................................................................... min-1 3.000
Speed ....................................................................... min-1
Speed ....................................................................... 3.000
min-1 3.0003.000 3.000 3.000
Speed adjustment 1 .................................................
Speed adjustment
Speed adjustment min-1 2.100
1 ................................................. min-1
1 ................................................. 2.100
min-1 2.1002.100 2.100 2.100
Speed adjustment 2 .................................................
Speed adjustment
Speed adjustment min-1 3.000
2 ................................................. min-1
2 ................................................. 3.000
min-1 3.0003.000 3.000 3.000
dle
Dimensions in mm
Electric equipment ...................................................
Electric equipment
Electric equipment V 12
................................................... V
................................................... V 12 12 12 12 12
e plate Driven drum .............................................................
Driven drum Driven front + rear
.............................................................
drum ............................................................. frontfront
+ rear
+front
rear+ rear front + rear
front + rear
w oil H H1 H2 L L1 W
Brakes BrakesBrakes
BP 10/35
Service Service658brake 962
Service 700
brake ........................................................... 1084 532hydrost. 350
...........................................................
brake ........................................................... hydrost.
hydrost.
hydrost. hydrost. hydrost.
Parking brake ...........................................................
Parking brake
BP 12/40 658Parking 962...........................................................
brake ...........................................................
700 1084 542hydromec. 400 hydromec.
hydromec.
hydromec. hydromec.hydromec.
Steering Steering
Steering
Steering system .......................................................
Steering systemSteering.......................................................
system .......................................................
oscil.artic. oscil.artic.
oscil.artic.
oscil.artic. oscil.artic.oscil.artic.
Steering methodSteering.......................................................
method .......................................................
Steering method ....................................................... hydrost. hydrost.
hydrost. hydrost. hydrost. hydrost.
Technical Data
Steering / oscillating angle Steering
+/- ..................................
/Steering
oscillating / oscillating
angle +/- angle..................................
grad +/- ..................................
33/8 grad BOMAG
grad33/833/8 33/8 BOMAG
33/8 33/8
Crab walk .................................................................
Crab walkCrab .................................................................
walk .................................................................
0- 50 0- 50 0- 50
0- 50 0- 50 0- 50
BP 10/35 BP 12/40
Exciter system ExciterExciter
systemsystem
Vibrating drum ..........................................................
Vibrating Vibrating
drum ..........................................................
drum ..........................................................
front + rear frontfront
+ rear
+front
rear+ rear front + rear
front + rear
Weights
Drive system ............................................................
Drive system Drive............................................................
system ............................................................
hydrost. hydrost.
hydrost.hydrost. hydrost. hydrost.
Operating weight CECE ...........................................
Frequency ................................................................
Frequency Frequency Hz
................................................................ kg
................................................................
42/63 Hz 65
Hz 42/6342/6342/63 72
42/63 42/63
Basic
Amplitudeweight .............................................................
.................................................................
AmplitudeAmplitude mm
................................................................. kg
.................................................................
0,50 mm mm64
0,500,50 0,50 71 0,50
0,50
Centrifugal force .......................................................
Centrifugal Centrifugal kN
force .......................................................
force .......................................................
8/19 kN kN 8/198/19 8/19 8/19 8/19
Dimensions
Sprinkler System Sprinkler Sprinkler
SystemSystem
Working width
Type of sprinkling ..........................................................
.....................................................
Type of sprinkling
Type of sprinkling
..................................................... mm
.....................................................
pressure 350
pressure
pressure
pressure 400 pressure
pressure
Capacities Capacities
Capacities
Driving Characteristics
Fuel ..........................................................................
Fuel ..........................................................................
Fuel ..........................................................................
l 30,0 l l 30,030,0 30,0 30,0 30,0
Working speed, max. ...............................................
Water .......................................................................
Water .......................................................................
Water ....................................................................... l 100,0 lm/minl 25100,0
100,0100,0 25
100,0 100,0
Max. gradeability
Technical modifications (dep.
reserved. Machines
Technical
may be on
modifications
shown
Technical soil Machines
withreserved. con.)
modifications
options. reserved. ........................
mayMachines
be shownmay
with be shown with options. %
options. 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
65
TANDEM ROLLER Standard Equipment Opt
66
TECHNICAL
Technical Data
DATA
Technical Data BOMAG BOMAG
BW 900-50 BW 900-50
Weights Weights
Operating weight CECE ........................................... kg
Operating weight CECE ...........................................
1.200 kg 1.200
Average axle load CECE Average
......................................... kg
axle load CECE .........................................
599 kg 599
Average static linear loadAverage
CECE ..............................
static linear load CECE kg/cm
..............................
6,7 kg/cm 6,7
Dimensions Dimensions
Working width ..........................................................
Working width ..........................................................
mm 900 mm 900
Track radius, inner ...................................................
Track radius, inner ...................................................
mm 1.647 mm 1.647
Driving Characteristics
Driving Characteristics
Working speed with vibration Working...................................
speed with vibration ...................................
km/h 0- 4,0 km/h 0- 4,0
Max. travel speed .....................................................
Max. travel speed .....................................................
km/h 0- 8,7 km/h 0- 8,7
3
Asphalt
Max. gradeability without/with
Max.vibr.gradeability
..........................
without/with vibr.
% ..........................
40/30 % 40/30
0,136 Drive Drive
Engine manufacturer ................................................
Engine manufacturer ................................................
Honda Honda
0,167 Type .........................................................................
Type .........................................................................
GX 630 GX 630
Cooling .....................................................................
Cooling .....................................................................
air air
Number of cylinders .................................................
Number of cylinders .................................................
2 2
Performance SAE J 1349Performance ........................................ kW
SAE J 1349 ........................................
14,9 kW 14,9
Speed ....................................................................... min-1
Speed .......................................................................
3.300 min-1 3.300
Electric equipment ................................................... V
Electric equipment ...................................................
12 V 12
ng bow, Drive system ............................................................
Drive system ............................................................
hydrost. hydrost.
Driven drum .............................................................
Driven drum .............................................................
2 2
dle Brakes Brakes
Dimensions in mm
Service brake ...........................................................
Service brake ...........................................................
hydrost. hydrost.
e plate
Parking brake ...........................................................
Parking brake ...........................................................
w oil H H1 H2 L L1 mech. W mech.
Steering Steering
BP 10/35 658 962 700 1084 532oscil.artic.
Steering system .......................................................
350
Steering system ....................................................... oscil.artic.
Steering
BP 12/40method .......................................................
Steering
658 method 962.......................................................
700 1084 542hydrost. 400 hydrost.
Steering angle +/- .....................................................
Steering angle +/- .....................................................
grad 33 grad 33
Oscillating angle +/- .................................................
Oscillating angle +/- .................................................
grad 6 grad 6
Exciter system
Technical Data Exciter system
Vibrating drum .......................................................... front
Vibrating drum .......................................................... BOMAG
front BOMAG
Drive system ............................................................ hydrost.
Drive system ............................................................ hydrost.
Frequency ................................................................ Hz 70
Frequency ................................................................ Hz BP70 10/35 BP 12/40
Amplitude ................................................................. mm 0,50
Amplitude ................................................................. mm 0,50
Weights
Centrifugal force ....................................................... kN 15
Centrifugal force ....................................................... kN 15
Operating
Sprinkler SystemweightSprinkler
CECE ...........................................
System kg 65 72
Basic weight.....................................................
Type of sprinkling .............................................................
Type of sprinkling .....................................................
pressure kg 64
pressure 71
Capacities
Dimensions Capacities
Fuel ..........................................................................
Fuel ..........................................................................
l 27,0 l 27,0
Working width ..........................................................
Water .......................................................................
Water ....................................................................... l 137,0 mm
l 350
137,0 400
Technical modifications reserved. Machines
Technical
may bemodifications
shown with options.
reserved. Machines may be shown with options.
Driving Characteristics
Working speed, max. ............................................... m/min 25 25
Max. gradeability (dep. on soil con.) ........................ % 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
67
TANDEM ROLLERS Standard Equipment
Hydrostatic travel and vibration drive
Opti
*F
BW 100 AD-5, BW 120 AD-5 Travel drive in series Su
2 scrapers per drum, spring loaded and We
tiltable Se
Pressure sprinkler system with interval Sli
switch EC
Multi function travel lever dis
Multi-function display incl. operating hour Te
meter BO
Water level Ind
Emergency STOP Ro
Individual control, vibration Op
Intelligent Vibration Control (IVC) Lig
Integrated stowage compartment Ba
Adjustable operator's seat En
Seat contact switch Th
Vandalism protection Ed
12V socket Gr
Working lights front and rear Hy
Back-up alarm Po
Lashing eyes, galvanized Sp
Single point lifting device Ba
Lockable engine hood made of composite tec
material Flo
68
TECHNICAL
Technical Data DATA
Technical
Technical
Data Data BOMAG BOMAG
BOMAG
BOMAG BOMAG BOMAG
BW 100 AD-5 BW
BW100
120
BWAD-5
AD-5
100 AD-5 BW 120BW
AD-5
120 AD-5
Weights Weights
Weights
Operating weight w. ROPS Operating
CECE Operating
...........................
weight w.weight ROPSw. CECE kg ...........................
ROPS CECE 2.500 kg
........................... 2.700 2.500
kg 2.500 2.700 2.700
Average static linear loadAverage
CECE ..............................
static
Average linear
static
load linear
CECE kg/cm
load..............................
CECE ..............................
12,5 kg/cm kg/cm 11,3 12,5
12,5 11,3 11,3
Grossweight .............................................................
Grossweight Grossweight kg
.............................................................
.............................................................
3.300 kg 3.500 3.300
kg 3.300 3.500 3.500
Dimensions Dimensions
Dimensions
Working width ..........................................................
Working width Working ..........................................................
width ..........................................................
mm 1.000 mm mm1.000
1.200 1.000 1.200 1.200
Track radius, inner ...................................................
Track radius, Trackinnerradius,
...................................................
inner ...................................................
mm 2.550 mm mm2.550
2.450 2.550 2.450 2.450
Driving Characteristics
DrivingDriving
Characteristics
Characteristics
Speed ....................................................................... km/h
Speed ....................................................................... km/h
Speed .......................................................................
0- 10,0 km/h 0- 10,00- 10,0
0- 10,0 0- 10,0 0- 10,0
Working speed with vibration Working...................................
speed
Working withspeed
vibration km/h ...................................
with vibration
...................................
0- 10,0 km/h km/h 0- 10,00- 10,0
0- 10,0 0- 10,0 0- 10,0
3
Asphalt
Max. gradeability without/with Max. vibr.
gradeability
Max.
..........................
gradeability
without/with % ..........................
without/with
vibr. vibr.40/30 %
.......................... % 40/30
40/30 40/30 40/30 40/30
0,136 Drive Drive Drive
Engine manufacturer ................................................
Engine manufacturer
Engine manufacturer................................................
................................................
Kubota KubotaKubota
Kubota Kubota Kubota
0,167 Type .........................................................................
Type .........................................................................
Type .........................................................................
D 1703 D 1703D 1703
D 1703 D 1703 D 1703
Emission stage .........................................................
EmissionEmission
stage .........................................................
stage .........................................................
Stage IIIa / TIER4i Stage IIIaStage
Stage IIIa IIIa / TIER4i Stage IIIaStage
/ TIER4i
/ TIER4i / TIER4i
IIIa / TIER4i
Cooling ..................................................................... water
Cooling .....................................................................
Cooling ..................................................................... water water
water water water
Number of cylinders .................................................
Number of Number
cylinders of cylinders 3
.................................................
................................................. 3 3 3 3 3
Performance ISO 14396 ..........................................
Performance Performance
ISO 14396 ISO kW..........................................
..........................................
14396 24,3 kW kW 24,324,3 24,3 24,3 24,3
Performance SAE J 1995Performance ........................................
Performance
SAE J 1995 hp ........................................
SAE........................................
J 1995 32,6 hp hp 32,632,6 32,6 32,6 32,6
ng bow, Speed ....................................................................... min-1 2.600
Speed ....................................................................... min-1
Speed ....................................................................... min-1 2.600 2.600
2.600 2.600 2.600
Speed adjustment 1 .................................................
Speed adjustment
Speed adjustment min-1 2.500
1 ................................................. min-1
1 ................................................. min-1 2.500 2.500
2.500 2.500 2.500
Speed adjustment 2 .................................................
Speed adjustment
Speed adjustment min-1 2.600
2 ................................................. min-1
2 ................................................. min-1 2.600 2.600
2.600 2.600 2.600
dle
Dimensions in mm
Electric equipment ...................................................
Electric equipment
Electric equipment V 12
................................................... V
................................................... V 12 12 12 12 12
e plate Driven drum .............................................................
Driven drum Driven front + rear
.............................................................
drum ............................................................. front
front +front
+ rearrear + rear front + rear
front + rear
w oil H H1 H2 L L1 W
Brakes BrakesBrakes
BP 10/35
Service 658brake
Service 962
Service 700
brake ........................................................... 1084 532hydrost. 350
...........................................................
brake ........................................................... hydrost.
hydrost.
hydrost. hydrost. hydrost.
Parking brake ...........................................................
Parking brake Parking ...........................................................
brake ...........................................................
hydromec. hydromec.
hydromec.
hydromec. hydromec.hydromec.
BP 12/40 658 962 700 1084 542 400
Steering Steering
Steering
Steering system .......................................................
Steering systemSteering.......................................................
system .......................................................
oscil.artic. oscil.artic.
oscil.artic.
oscil.artic. oscil.artic.oscil.artic.
Steering method .......................................................
Steering methodSteering.......................................................
method .......................................................
hydrost. hydrost.
hydrost. hydrost. hydrost. hydrost.
Technical Data
Steering / oscillating angle Steering
+/- ..................................
/Steering
oscillating / oscillating
angle +/- angle..................................
grad +/- ..................................
32/10 grad BOMAG
grad 32/10
32/10 32/10 BOMAG
32/10 32/10
Crab walk .................................................................
Crab walkCrab .................................................................
walk .................................................................
0- 50 0- 50 0- 50
0- 50 0- 50 0- 50
BP 10/35 BP 12/40
Exciter system ExciterExciter
systemsystem
Vibrating drum ..........................................................
Vibrating Vibrating
drum ..........................................................
drum ..........................................................
front + rear front
front +front
rear + rear
+ rear front + rear
front + rear
Weights
Drive system ............................................................
Drive system Drive............................................................
system ............................................................
hydrost. hydrost.
hydrost.
hydrost. hydrost. hydrost.
Operating weightFrequency CECE ...........................................
Frequency ................................................................
Frequency Hz
................................................................ kg
................................................................
63/67 Hz Hz65 63/67 63/67
63/67 72 63/67
63/67
Basic
Amplitudeweight .............................................................
.................................................................
AmplitudeAmplitude mm
................................................................. kg
mm
.................................................................
0,50 mm64 0,50 0,50
0,50 71 0,50
0,50
Centrifugal force .......................................................
Centrifugal Centrifugal kN
force .......................................................
force .......................................................
30/34 kN 36/41 30/34
kN 30/34 36/41 36/41
Dimensions
Sprinkler System Sprinkler Sprinkler
SystemSystem
Working width
Type of sprinkling ..........................................................
.....................................................
Type of sprinkling
Type of sprinkling
..................................................... mm
.....................................................
pressure 350
pressure
pressure
pressure 400 pressure
pressure
Capacities Capacities
Capacities
Driving Characteristics
Fuel ..........................................................................
Fuel ..........................................................................
Fuel ..........................................................................
l 35,0 l l 35,0
35,0 35,0 35,0 35,0
Working speed, max. ...............................................
Water .......................................................................
Water ....................................................................... m/min
Water .......................................................................
l 205,0 l l 25
205,0
205,0 205,0 25
205,0 205,0
Max. gradeability
Technical modifications (dep.
reserved. Machines
Technical
may be on
modifications
shown
Technical soil
with options.
reserved. con.)
modifications
Machines may........................
reserved. Machines
be shownmay
with be shown with options. %
options. 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
69
TANDEM ROLLERS Standard Equipment
Hydrostatic travel and vibration drive
Opt
*F
*S
Standard Equipment Optional Equipment
(va
Hydrostatic travel and vibration drive * Foldable ROPS incl. seat belt
Fields of application: Travel drive in series Sun roof, foldable with ROPS
Earthwork and asphalt applications. 2 scrapers per drum, spring loaded and Weather protection for sun roof
tiltable Seat heating
New construction and repair work for medium
Pressure and
sprinkler small
system with interval Sliding seat incl. double travel lever
scale construction projects, on parking lots, sidewalks, cycle
switch ECONOMIZER with asphalt temperature
70
TECHNICAL
Technical Data DATA
Technical
Technical
Data Data BOMAG BOMAG
BOMAG
BOMAG BOMAG BOMAG
BW 100 AD-5 BWBW
100
120
BWAD-5
AD-5
100 AD-5 BW 120BW
AD-5
120 AD-5
Weights Weights
Weights
Operating weight w. ROPS Operating
CECE Operating
...........................
weight w.weight ROPSw. CECEROPS
kg ........................... kg
CECE ...........................
2.600 kg 2.600
2.750 2.600 2.750 2.750
Average static linear loadAverage
CECE ..............................
static
Average linear
static
load linear
CECE load
kg/cm
..............................
CECE ..............................
13,0 kg/cm 13,0
kg/cm 11,5 13,0 11,5 11,5
Grossweight .............................................................
Grossweight Grossweight
.............................................................
.............................................................
kg 3.400 kg kg 3.400
3.500 3.400 3.500 3.500
Dimensions Dimensions
Dimensions
Working width ..........................................................
Working width Working ..........................................................
width ..........................................................
mm 1.000 mm mm1.000
1.200 1.000 1.200 1.200
Track radius, inner ...................................................
Track radius, Trackinnerradius,
...................................................
inner ...................................................
mm 2.550 mm mm2.550
2.450 2.550 2.450 2.450
Driving Characteristics
DrivingDriving
Characteristics
Characteristics
Speed .......................................................................
Speed ....................................................................... km/h
Speed .......................................................................
km/h 0- 10,0 km/h
0- 10,0
0- 10,00- 10,0 0- 10,0 0- 10,0
Working speed with vibration Working ...................................
speed
Working withspeed
vibration
with vibration
................................... km/h
km/h ...................................
0- 10,0 km/h
0- 10,0
0- 10,00- 10,0 0- 10,0 0- 10,0
3
Asphalt
Max. gradeability without/with Max. vibr.
gradeability
Max.
..........................
gradeability
without/with without/with
vibr.
% ..........................
vibr. 40/30 %
.......................... % 40/30
40/30 40/30 40/30 40/30
0,136 Drive Drive Drive
Engine manufacturer ................................................
Engine manufacturer
Engine manufacturer ................................................
................................................
Kubota Kubota
Kubota Kubota Kubota Kubota
0,167 Type .........................................................................
Type .........................................................................
Type .........................................................................
D1803 D1803
D1803D1803 D1803 D1803
Emission stage .........................................................
EmissionEmissionstage .........................................................
stage .........................................................
Stage V / TIER4f Stage V /Stage
Stage TIER4f
V V / TIER4f
/ TIER4f Stage V /Stage
TIER4fV / TIER4f
Exhaust gas aftertreatment Exhaust
......................................
gas
Exhaust
aftertreatment
gas aftertreatment DPF
......................................
...................................... DPF DPF DPF DPF DPF
Cooling ..................................................................... water
Cooling .....................................................................
Cooling ..................................................................... water
water water water water
Number of cylinders .................................................
Number of Number
cylinders of cylinders 3
.................................................
................................................. 3 3 3 3 3
Performance ISO 14396 Performance ..........................................
Performance
ISO 14396 ISO ..........................................
14396 24,6 kW
kW.......................................... kW 24,624,6 24,6 24,6 24,6
ng bow, Performance SAE J 1995Performance ........................................
Performance
SAE J 1995 SAE........................................
J 1995 33,0 hp
hp ........................................ hp 33,033,0 33,0 33,0 33,0
Speed .......................................................................
Speed ....................................................................... min-1
Speed .......................................................................
min-1 2.600 2.600
min-1 2.600 2.600 2.600 2.600
Speed adjustment 1 .................................................
Speed adjustment
Speed adjustment
1 .................................................
1 .................................................
min-1 2.500 min-1 2.500
min-1 2.500 2.500 2.500 2.500
dle
Dimensions
Speed adjustment 2 in mm
.................................................
Speed adjustment
Speed adjustment 2.600
2 ................................................. min-1
2 .................................................
min-1 2.600
min-1 2.600 2.600 2.600 2.600
e plate Electric equipment ...................................................
Electric equipment
Electric equipment
...................................................
...................................................
V 12 V V 12 12 12 12 12
w oil H drum H1drum H2
Driven drum .............................................................
Driven Driven L L1 frontW + rear
.............................................................
............................................................. front + rear
front +front
rear+ rear front + rear
front + rear
BP 10/35
Brakes 658Brakes
Brakes 962 700 1084 532 350
Service brake ...........................................................
Service brake Service ...........................................................
brake ...........................................................
hydrost. hydrost.
hydrost.
hydrost. hydrost. hydrost.
BP 12/40
Parking Parking658brake 962
Parking 700
brake ........................................................... 1084 542hydromec. 400
...........................................................
brake ........................................................... hydromec.
hydromec.
hydromec. hydromec.hydromec.
Steering Steering
Steering
Steering system .......................................................
Steering systemSteering.......................................................
system .......................................................
oscil.artic. oscil.artic.
oscil.artic.
oscil.artic. oscil.artic.oscil.artic.
Technical
Steering method Data.......................................................
Steering methodSteering.......................................................
method .......................................................
hydrost. hydrost.
hydrost.
BOMAG hydrost. hydrost. hydrost.
BOMAG
Steering / oscillating angle Steering
+/- ..................................
/Steering
oscillating / oscillating
angle +/- angle..................................
grad +/- ..................................
32/10 grad grad32/10
32/10 32/10 32/10 32/10
Crab walk .................................................................
Crab walkCrab .................................................................
walk .................................................................
0- 50 BP 0-10/35
0- 50 50 0- 50 BP
0- 50 12/400- 50
Exciter system ExciterExciter
systemsystem
Weights
Vibrating drum ..........................................................
Vibrating Vibrating front + rear
drum ..........................................................
drum .......................................................... front
front +front
+ rearrear+ rear front + rear
front + rear
Operating weightDrive CECE system
Drive ...........................................
Drive system ............................................................ hydrost.
............................................................ kg
system ............................................................ 65hydrost.
hydrost. hydrost. 72 hydrost.
hydrost.
Frequency
Basic ................................................................
weight Frequency Frequency
................................................................
................................................................
Hz
............................................................. 63/67 Hz
kg Hz 64 63/67 63/67
63/67 63/67
71 63/67
Amplitude .................................................................
AmplitudeAmplitude 0,50
.................................................................
.................................................................
mm mm mm0,500,50 0,50 0,50 0,50
Centrifugal force .......................................................
Dimensions Centrifugal Centrifugal 30/34
force .......................................................
force .......................................................
kN kN 36/41 30/34
kN 30/34 36/41 36/41
Sprinkler System
Working Sprinkler Sprinkler
SystemSystem
width .......................................................... mm 350 400
Type of sprinkling .....................................................
Type of sprinkling
Type of sprinkling
.....................................................
.....................................................
pressure pressure
pressure
pressure pressure pressure
Driving
Capacities Characteristics Capacities Capacities
Working speed, max. ...............................................
Fuel ..........................................................................
Fuel .......................................................................... lm/minl 25
Fuel ..........................................................................
l 35,0 35,0
35,0 35,0 25
35,0 35,0
Max. gradeability (dep.Water
Water .......................................................................
Water .......................................................................
on .......................................................................
l
soil con.) ........................ 205,0 l% l 30
205,0
205,0 205,0 205,0
30 205,0
Technical modifications reserved. Machines
Technical
may be
modifications
shown
Technical
with reserved.
options.
modifications
Machines
reserved.
mayMachines
be shownmay
with be
options.
shown with options.
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
71
TANDEM ROLLERS Standard Equipment
Hydrostatic travel and vibration drive
Opti
Fo
72
TECHNICAL
Technical Data
DATA
Technical
Technical
Data Data BOMAG BOMAG
BOMAG
BOMAG BOMAG BOMAG
BW 100 SL-5 BWBW
100
120
BW 100 SL-5 BW 120BW
SL-5
SL-5 120 SL-5
SL-5
Weights Weights
Weights
Operating weight w. ROPS Operating
CECE Operating
...........................
weight w.weight ROPSw. CECEROPS
kg ........................... kg
CECE ...........................
2.350 kg 2.350
2.500 2.350 2.500 2.500
Average static linear loadAverage
CECE ..............................
static
Average linear
static
load linear
CECE load
kg/cm
.............................. kg/cm
CECE ..............................
11,8 11,8
kg/cm 10,4 11,8 10,4 10,4
Grossweight .............................................................
Grossweight Grossweight
.............................................................
.............................................................
kg 2.800 kg kg 2.800
2.800 2.800 2.800 2.800
Dimensions Dimensions
Dimensions
Working width ..........................................................
Working width Working ..........................................................
width ..........................................................
mm 1.000 mm mm1.000
1.200 1.000 1.200 1.200
Track radius, inner ...................................................
Track radius, Trackinnerradius,
...................................................
inner ...................................................
mm 2.550 mm mm2.550
2.450 2.550 2.450 2.450
Driving Characteristics
DrivingDriving
Characteristics
Characteristics
Speed .......................................................................
Speed ....................................................................... km/h
Speed .......................................................................
km/h 0- 9,0 km/h
0- 9,0
0- 9,0 0- 9,0 0- 9,0 0- 9,0
Working speed with vibration Working ...................................
speed
Working withspeed
vibration
with vibration
...................................
km/h ...................................
0- 5,0 km/h km/h
0- 5,0
0- 5,0 0- 5,0 0- 5,0 0- 5,0
3
Asphalt
Max. gradeability without/with Max. vibr.
gradeability
Max.
..........................
gradeability
without/with without/with
vibr.
% ..........................
vibr. 40/30 %
.......................... % 40/30
40/30 40/30 40/30 40/30
0,136 Drive Drive Drive
Engine manufacturer ................................................
Engine manufacturer
Engine manufacturer ................................................
................................................
Kubota Kubota
Kubota Kubota Kubota Kubota
0,167 Type .........................................................................
Type .........................................................................
Type .........................................................................
D 1703 DI D 1703
D 1703DID DI
1703 DI D 1703 DID 1703 DI
Emission stage .........................................................
EmissionEmission stage .........................................................
stage .........................................................
TIER4f TIER4f
TIER4fTIER4f TIER4f TIER4f
Cooling .....................................................................
Cooling .....................................................................
Cooling .....................................................................
water water
water water water water
Number of cylinders .................................................
Number of Number
cylinders of cylinders
.................................................
.................................................
3 3 3 3 3 3
Performance ISO 14396 Performance ..........................................
Performance
ISO 14396 ISO..........................................
14396 kW
kW..........................................
18,5 kW 18,518,5 18,5 18,5 18,5
Performance SAE J 1995Performance ........................................
Performance
SAE J 1995 SAE........................................
J 1995 hp
hp ........................................
25,0 hp 25,025,0 25,0 25,0 25,0
ng bow, Speed .......................................................................
Speed ....................................................................... min-1
Speed .......................................................................
min-1 2.200 2.200
min-1 2.200 2.200 2.200 2.200
Electric equipment ...................................................
Electric equipment
Electric equipment
...................................................
...................................................
V 12 V V 12 12 12 12 12
Driven drum .............................................................
Driven drum Driven.............................................................
drum .............................................................
front + rear front + rear
front +front
rear+ rear front + rear
front + rear
dle
Dimensions
Brakes in mm BrakesBrakes
e plate
Service brake ...........................................................
Service
H brake Service
H1 ...........................................................
brake H2 ...........................................................
L L1 hydrost. W hydrost.
hydrost.
hydrost. hydrost. hydrost.
w oil Parking brake ...........................................................
Parking brake Parking ...........................................................
brake ...........................................................
hydromec. hydromec.
hydromec.
hydromec. hydromec.hydromec.
BP 10/35 658 962 700 1084 532 350
Steering Steering
Steering
BP 12/40
Steering 658system 962.......................................................
700.......................................................
system .......................................................
Steering Steering system 1084 542oscil.artic. 400 oscil.artic.
oscil.artic.
oscil.artic. oscil.artic.oscil.artic.
Steering method .......................................................
Steering methodSteering.......................................................
method .......................................................
hydrost. hydrost.
hydrost.hydrost. hydrost. hydrost.
Steering / oscillating angle Steering
+/- ..................................
/Steering
oscillating / oscillating
angle +/- angle..................................
grad +/- ..................................
32/10 grad grad32/10
32/10 32/10 32/10 32/10
Crab walk .................................................................
Crab walkCrab .................................................................
walk .................................................................
0- 50 0- 50
0- 50 0- 50 0- 50 0- 50
Technical Data BOMAG BOMAG
Exciter system ExciterExciter
systemsystem
Vibrating drum ..........................................................
Vibrating Vibrating front + rear
drum ..........................................................
drum .......................................................... front + rear
front +front
rear+ rear front + rear
front + rear
Drive system ............................................................
Drive system hydrost.
Drive............................................................
system ............................................................
BP 10/35
hydrost. hydrost.
hydrost.
BP 12/40
hydrost. hydrost.
Frequency ................................................................
Frequency Frequency 72
................................................................ Hz
................................................................
Hz Hz 72 72 72 72 72
Weights
Amplitude .................................................................
AmplitudeAmplitude 0,50
................................................................. mm
.................................................................
mm mm0,500,50 0,50 0,50 0,50
Operating
Centrifugal forceweight CECE ...........................................
.......................................................
Centrifugal Centrifugal
force ....................................................... kg
force .......................................................
kN 34 kN kN 65
34 40 34 72 40
40
Basic weight
Sprinkler .............................................................
System SprinklerSprinkler
SystemSystem kg 64 71
Type of sprinkling .....................................................
Type of sprinkling
Type of sprinkling
.....................................................
.....................................................
pressure pressure
pressure
pressure pressure pressure
Dimensions
Capacities Capacities Capacities
Working width ..........................................................
Fuel ..........................................................................
Fuel ..........................................................................
l 35,0 lmm
Fuel .......................................................................... l 350
35,0
35,0 35,0 400
35,0 35,0
Water .......................................................................
Water .......................................................................
Water .......................................................................
l 165,0 l l 165,0
165,0 165,0 165,0 165,0
Driving Characteristics
Technical modifications reserved. Machines
Technical
may be
modifications
shown
Technical
with reserved.
options.
modifications
Machines
reserved.
mayMachines
be shownmay
with be
options.
shown with options.
73
TANDEM ROLLERS Standard Equipment
Hydrostatic travel and vibration drive
Opti
Fo
Fields of application: Travel drive in series Sun roof, foldable with ROPS
2 scrapers per drum, spring loaded and Sliding seat incl. double travel lever
Earthwork and asphalt applications. tiltable ECONOMIZER with asphalt temperature
New construction and repair work for medium
Pressure and
sprinkler small
system with interval display
Dimensions in mm material
Dimensions in mm
A B C D H H2 K L O S W
A B C D H H2 K L O S W
BW 100 SL-5 1752 1072 523 700 1808 2568 254 2529 36 10 1000
BW120
BW 100SL-5
SL-5 1752
1752 1072
1272 523
523 700700 1808180825682568
254 254
2529 2529
36 10
36 1000
10 1200
BW 120 SL-5 1752 1272 523 700 1808 2568 254 2529 36 10 1200
74
TECHNICAL
Technical Data
DATA
Technical
Technical
Data Data BOMAG BOMAG
BOMAG
BOMAG BOMAG BOMAG
BW 100 SL-5 BW
BW100
120
BWSL-5
100 SL-5 BW 120BW
SL-5 120 SL-5
SL-5
Weights Weights
Weights
Operating weight w. ROPS Operating
CECE Operating
...........................
weight w.weight ROPSw. CECE
ROPS
kg ...........................
CECE ...........................
2.350 kg 2.500 2.350
kg 2.350 2.500 2.500
Average static linear loadAverage
CECE ..............................
Average
static linear static
loadlinear
CECE load
kg/cm
..............................
CECE ..............................
11,8 kg/cm kg/cm 10,4 11,8
11,8 10,4 10,4
Grossweight .............................................................
Grossweight Grossweight
.............................................................
.............................................................
kg 2.800 kg 2.800 2.800
kg 2.800 2.800 2.800
Dimensions Dimensions
Dimensions
Working width ..........................................................
Working Workingwidth ..........................................................
width ..........................................................
mm 1.000 mm mm1.000
1.200 1.000 1.200 1.200
Track radius, inner ...................................................
Track radius, Trackinner
radius,...................................................
inner ...................................................
mm 2.550 mm mm2.550
2.450 2.550 2.450 2.450
Driving Characteristics
DrivingDriving
Characteristics
Characteristics
Speed .......................................................................
Speed ....................................................................... km/h
Speed .......................................................................
km/h 0- 9,0 km/h 0- 9,0 0- 9,0
0- 9,0 0- 9,0 0- 9,0
Working speed with vibration Working...................................
Working
speed with speed
vibration
with vibration
...................................
km/h ...................................
0- 5,0 km/h km/h 0- 5,0 0- 5,0
0- 5,0 0- 5,0 0- 5,0
3
Asphalt
Max. gradeability without/with Max. vibr.
gradeability
Max.
..........................
gradeability
without/with without/with
vibr.
% ..........................
vibr. 40/30 %
.......................... % 40/30
40/30 40/30 40/30 40/30
0,136 Drive Drive Drive
Engine manufacturer ................................................
Engine manufacturer
Engine manufacturer ................................................
................................................
Kubota Kubota
Kubota Kubota Kubota Kubota
0,167 Type .........................................................................
Type .........................................................................
Type .........................................................................
D 1703 D 1703
D 1703 D 1703 D 1703 D 1703
Emission stage .........................................................
EmissionEmission
stage .........................................................
stage .........................................................
Stage V / TIER4f Stage V /Stage
Stage VTIER4fV / TIER4f
/ TIER4f Stage V /Stage
TIER4f
V / TIER4f
Cooling .....................................................................
Cooling .....................................................................
Cooling .....................................................................
water water water
water water water
Number of cylinders .................................................
Number of Number
cylinders of cylinders
.................................................
.................................................
3 3 3 3 3 3
Performance ISO 14396 ..........................................
Performance Performance
ISO 14396 ISO ..........................................
14396 kW
kW..........................................
18,5 kW 18,518,5 18,5 18,5 18,5
Performance SAE J 1995Performance ........................................
Performance
SAE J 1995 SAE........................................
J 1995 hp
hp ........................................
25,0 hp 25,025,0 25,0 25,0 25,0
ng bow, Speed .......................................................................
Speed .......................................................................
Speed .......................................................................
min-1 2.200 min-1 min-1 2.200 2.200
2.200 2.200 2.200
Electric equipment ...................................................
Electric equipment
Electric equipment
................................................... V
...................................................
V 12 V 12 12 12 12 12
Driven drum .............................................................
Driven drum Driven.............................................................
drum .............................................................
front + rear front
front +front
+ rearrear+ rear front + rear
front + rear
dle
Dimensions in mm
e plate Brakes BrakesBrakes
Service brake ...........................................................
Service
H brake Service
H1 ...........................................................
brake H2 ...........................................................
L L1 hydrost. W hydrost.
hydrost.
hydrost. hydrost. hydrost.
w oil Parking brake ...........................................................
Parking brake Parking ...........................................................
brake ...........................................................
hydromec. hydromec.
hydromec.
hydromec. hydromec.hydromec.
BP 10/35 658 962 700 1084 532 350
Steering Steering
Steering
BP 12/40
Steering 658Steering 962.......................................................
700.......................................................
system .......................................................
Steering system system 1084 542oscil.artic. 400 oscil.artic.
oscil.artic.
oscil.artic. oscil.artic.
oscil.artic.
Steering method .......................................................
Steering Steering
method .......................................................
method .......................................................
hydrost. hydrost.
hydrost. hydrost. hydrost. hydrost.
Steering / oscillating angle Steering
+/- ..................................
Steering
/ oscillating / oscillating
angle +/-angle ..................................
grad +/- ..................................
32/10 grad 32/10 32/10
grad32/10 32/10 32/10
Crab walk .................................................................
Crab walk Crab
.................................................................
walk .................................................................
0- 50 0- 50 0- 50
0- 50 0- 50 0- 50
Technical Data BOMAG BOMAG
Exciter system ExciterExciter
systemsystem
Vibrating drum ..........................................................
VibratingVibrating
drum ..........................................................
drum ..........................................................
front + rear front
front +front
+ rearrear+ rear front + rear
front + rear
Drive system ............................................................
Drive system Drive............................................................
system ............................................................
hydrost.
BP 10/35
hydrost. hydrost.
hydrost.
BP 12/40
hydrost. hydrost.
Frequency ................................................................
Frequency Frequency
................................................................
................................................................
Hz 72/65 Hz 72/65 72/65
Hz 72/65 72/65 72/65
Weights
Amplitude .................................................................
Amplitude Amplitude
................................................................. mm
.................................................................
mm 0,50 mm0,500,50 0,50 0,50 0,50
Operating
Centrifugal forceweight CECE
Centrifugal ...........................................
.......................................................
Centrifugal
force ....................................................... kg
force .......................................................
kN 34/26 kN kN 65 40/26 34/26
34/26 72 40/26
40/26
Basic weight
Sprinkler .............................................................
System SprinklerSprinkler
SystemSystem kg 64 71
Type of sprinkling .....................................................
Type of sprinkling
Type of sprinkling
.....................................................
.....................................................
pressure pressure
pressure
pressure pressurepressure
Dimensions
Capacities Capacities Capacities
Working width ..........................................................
Fuel ..........................................................................
Fuel ..........................................................................
l 35,0 mm
Fuel ..........................................................................
l l 350
35,0
35,0 35,0 400
35,0 35,0
Water .......................................................................
Water .......................................................................
Water .......................................................................
l 165,0 l l 165,0
165,0 165,0 165,0 165,0
Driving Characteristics
Technical modifications reserved. Machines
Technical
may bemodifications
shown
Technical
with options.
reserved.
modifications
Machines
reserved.
mayMachines
be shownmay
withbe
options.
shown with options.
Working speed, max. ............................................... m/min 25 25
Max. gradeability (dep. on soil con.) ........................ % 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
75
TANDEM ROLLER Standard Equipment
Hydrostatic drive
Opti
EC
BOMAG
Hellerwald
D-56154 Boppard
P.O. Box 5162
Tel. (0)6742 - 1000
Fax (0)6742 - 3090
Dimensions in mm
Dimensions in mm
A
A BB C C D DH HK K
L OL SO W S W
BWBW
131
131AD-5
AD-5 2300 1380
2300 1380 625625 800 8001700 1700
250 250
3100 3100 15 40
40 130015 1300
76
TECHNICAL
Technical Data
DATA
Technical Data BOMAG BOMAG
BW 131 AD-5 BW 131 AD-5
Weights Weights
Operating weight CECE ........................................... kg
Operating weight CECE ...........................................
4.000 kg 4.000
Static linear load, front CECE Static.................................. kg/cm
linear load, front CECE ..................................
15,4 kg/cm 15,4
Max. weight .............................................................. kg
Max. weight ..............................................................
4.200 kg 4.200
Dimensions Dimensions
Track radius, inner ...................................................
Track radius, inner ...................................................
mm 3.000 mm 3.000
Driving Characteristics
Driving Characteristics
Speed (2) .................................................................
Speed (2) .................................................................
km/h 12,0 km/h 12,0
Speed (1) .................................................................
Speed (1) .................................................................
km/h 6,0 km/h 6,0
Max. gradeability without/with Max. vibr.
gradeability
..........................
without/with vibr.
% ..........................
30/20 % 30/20
3
Asphalt
Drive Drive
0,136 Engine manufacturer ................................................
Engine manufacturer ................................................
Kubota Kubota
Type .........................................................................
Type .........................................................................
D 1703 D 1703
0,167 Emission stage .........................................................
Emission stage .........................................................
Stage IIIa/TIER4f/CN3 Stage IIIa/TIER4f/CN3
Cooling .....................................................................
Cooling .....................................................................
water water
Number of cylinders .................................................
Number of cylinders .................................................
3 3
Performance ISO 9249 ............................................ kW
Performance ISO 9249 ............................................ 24,3 kW 24,3
Performance SAE J 1995Performance ........................................ hp
SAE J 1995 ........................................
32,6 hp 32,6
Speed ....................................................................... min-1
Speed .......................................................................
2.600 min-1 2.600
ng bow, Electric equipment ................................................... V
Electric equipment ...................................................
12 V 12
Driven drum .............................................................
Driven drum .............................................................
2 2
dle Brakes Brakes
Dimensions in mm
Service brake ...........................................................
Service brake ...........................................................
hydrost. hydrost.
e plate
Parking brake ...........................................................
Parking
H brakeH1 ...........................................................
H2 L L1 hydromec. W hydromec.
w oil
Steering Steering
BP 10/35 658 962 700 1084 532oscil.artic.
Steering system .......................................................
350
Steering system ....................................................... oscil.artic.
BP 12/40
Steering 658method 962.......................................................
700 1084 542hydrost.
method .......................................................
Steering 400 hydrost.
Steering angle +/- .....................................................
Steering angle +/- .....................................................
grad 35 grad 35
Oscillating angle +/- .................................................
Oscillating angle +/- .................................................
grad 8 grad 8
Exciter system
Technical Data Exciter system
Drive system ............................................................ hydrost.
Drive system ............................................................ BOMAG
hydrost. BOMAG
Frequency (1) ........................................................... Hz 60
Frequency (1) ........................................................... Hz 60
Amplitude (1) ............................................................ mm 0,30
Amplitude (1) ............................................................ mm
BP
0,30
10/35 BP 12/40
Centrifugal force 1 .................................................... kN 28
Centrifugal force 1 .................................................... kN 28
Weights
Sprinkler System Sprinkler System
Operating weight
Type of sprinkling CECE ...........................................
.....................................................
Type of sprinkling .....................................................
pressure kg 65
pressure 72
Basic weight ............................................................. kg 64 71
Capacities Capacities
Fuel ..........................................................................
Fuel ..........................................................................
l 40,0 l 40,0
Dimensions
Water .......................................................................
Water .......................................................................
l 310,0 l 310,0
Working width ..........................................................
Technical modifications reserved. Machines
Technical
may be
modifications
shown with reserved.
options. Machines may be shown with options. mm 350 400
Driving Characteristics
Working speed, max. ............................................... m/min 25 25
Max. gradeability (dep. on soil con.) ........................ % 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
77
TANDEM ROLLERS Standard Equipment
Hydrostatic travel and vibration drive
Optional
*Foldab
BW 135 AD-5, BW 138 AD-5 2 scrapers per drum, spring loaded and
tiltable
Sun roo
Sun roo
Pressure sprinkler system with interval Weathe
switch Weathe
Multi function travel lever Seat he
Multi-function display incl. operating hour ECONO
meter display
Water level Temper
Electronic fuel gauge BOMAG
Emergency STOP Indicato
Individual control, vibration Rotary b
Intelligent Vibration Control (IVC) Optiona
Integrated stowage compartment Lighting
Sliding seat incl. double travel lever Battery
Seat contact switch Environ
12V socket Theft pr
Working lights front and rear Edge cu
Vandalism protection Gravel s
Lockable engine hood made of composite Hydraul
material Pointer
Lashing eyes, galvanized Special
Single point lifting device Backup
Back-up alarm technolo
Flow div
2. Ampl
Standard Equipment Optional Equipment
Hydrostatic travel and vibration drive *Foldable ROPS incl. seat belt
* Standa
2 scrapers per drum, spring loaded and Sun roof, rigid
(valid w
Fields of application: tiltable Sun roof, foldable with ROPS
Pressure sprinkler system with interval Weather protection for sun roof
Compaction of asphalt layers, wear courses and
switchfrost blanket Weather protection cabin
layers in new constructions and repair workMulti
on function
confined,
travel small
lever Seat heating
Multi-function display incl. operating hour ECONOMIZER with asphalt temperature
and medium scale construction projects, e.g.meter
walkways and display
cycle paths, parking lots, play and sports grounds.
Water level Support for Temperature display
78
TECHNICAL
Technical Data
DATA
Technical
Technical
Data Data BOMAG BOMAG
BOMAG
BOMAG BOMAG BOMAG
BW 135 AD-5 BWBW
135BW
138
AD-5
135
AD-5AD-5 BW 138BW
AD-5
138 AD-5
Weights Weights
Weights
Operating weight w. ROPS Operating
CECEOperating
...........................
weight w.weight ROPSw. CECE kg ...........................
ROPS CECE ...........................
4.000 kg kg 4.0004.4004.000 4.400 4.400
Average static linear loadAverage
CECE ..............................
Average
static linear static
loadlinear
CECE kg/cm
load.............................. kg/cm
CECE ..............................
15,4 15,415,9 15,4
kg/cm 15,9 15,9
Grossweight .............................................................
Grossweight Grossweight kg
.............................................................
.............................................................
4.200 kg kg 4.2004.6004.200 4.600 4.600
Dimensions Dimensions
Dimensions
Working width ..........................................................
Working Workingwidth ..........................................................
width ..........................................................
mm 1.300 mm mm1.300
1.3801.300 1.380 1.380
Track radius, inner ...................................................
Track radius, Trackinnerradius,
...................................................
inner ...................................................
mm 2.665 mm mm2.665
2.6162.665 2.616 2.616
Driving Characteristics
DrivingDriving
Characteristics
Characteristics
Speed ....................................................................... km/h
Speed ....................................................................... km/h
Speed .......................................................................
0- 10,0 km/h
0- 10,0 0- 10,0
0- 10,0 0- 10,0 0- 10,0
Working speed with vibration Working ...................................
Working
speed with speed
vibration km/h ...................................
with vibration
...................................
0- 10,0 km/h km/h
0- 10,0 0- 10,0
0- 10,0 0- 10,0 0- 10,0
3
Asphalt
Max. gradeability without/with Max. gradeability
vibr.Max.
..........................
gradeability
without/with % ..........................
without/with
vibr. %
vibr. ..........................
40/30 % 40/3040/3040/30 40/30 40/30
0,136 Drive Drive Drive
Engine manufacturer ................................................
Engine manufacturer
Engine manufacturer ................................................
................................................
Kubota Kubota
Kubota Kubota Kubota Kubota
0,167 Type .........................................................................
Type .........................................................................
Type .........................................................................
V 2203 V 2203
V 2203 V 2203 V 2203 V 2203
Emission stage .........................................................
EmissionEmissionstage .........................................................
stage .........................................................
Stage IIIa / TIER4i Stage IIIaStage
Stage IIIa IIIa / TIER4i
/ TIER4i
/ TIER4i Stage IIIaStage
/ TIER4i
IIIa / TIER4i
Cooling ..................................................................... water
Cooling .....................................................................
Cooling ..................................................................... waterwater
water water water
Number of cylinders .................................................
Number of Number
cylinders of cylinders 4
.................................................
................................................. 4 4 4 4 4
Performance ISO 14396 Performance ..........................................
Performance
ISO 14396 ISO kW..........................................
33,3
..........................................
14396 kW kW 33,333,3 33,3 33,3 33,3
Performance SAE J 1995Performance ........................................
Performance
SAE J 1995 hp ........................................
44,7
SAE........................................
J 1995 hp hp 44,744,7 44,7 44,7 44,7
ng bow, Speed ....................................................................... min-1
Speed ....................................................................... min-1
Speed ....................................................................... min-1 2.600 2.600 2.600
Speed adjustment 1 .................................................
Speed adjustment
Speed adjustment min-1
1 ................................................. min-1
1 .................................................
2.140 min-1
2.1402.7702.140 2.770 2.770
Speed adjustment 2 .................................................
Speed adjustment
Speed adjustment min-1
2 .................................................
2 .................................................
2.770 min-1 min-1
2.7702.1402.770 2.140 2.140
dle
Dimensions in mm
Electric equipment ...................................................
Electric equipment
Electric equipment V
...................................................
...................................................
12 V V 12 12 12 12 12
e plate Driven drum .............................................................
Driven drum Driven.............................................................
drum .............................................................
front + rear frontfront +front
+ rear rear+ rear front + rear
front + rear
w oil H H1 H2 L L1 W
Brakes BrakesBrakes
BP 10/35
Service Service658brake 962
Service 700
brake ........................................................... 1084 532hydrost. 350
...........................................................
brake ........................................................... hydrost.
hydrost.
hydrost. hydrost. hydrost.
Parking brake ...........................................................
Parking brake
BP 12/40 658Parking 962...........................................................
brake ...........................................................
700 1084 542hydromec. 400 hydromec.
hydromec.
hydromec. hydromec.hydromec.
Steering Steering
Steering
Steering system .......................................................
Steering Steering
system .......................................................
system .......................................................
oscil.artic. oscil.artic.
oscil.artic.
oscil.artic. oscil.artic.
oscil.artic.
Steering method .......................................................
Steering Steering
method .......................................................
method .......................................................
hydrost. hydrost.
hydrost. hydrost. hydrost. hydrost.
Technical Data
Steering / oscillating angle Steering
+/- ..................................
Steering
/ oscillating / oscillating
angle +/-angle ..................................
grad+/- ..................................
32/10 grad BOMAG
grad 32/10
32/10 32/10 BOMAG
32/10 32/10
Crab walk .................................................................
Crab walk Crab
.................................................................
walk .................................................................
0- 50 0- 50 0- 50
0- 50 0- 50 0- 50
BP 10/35 BP 12/40
Exciter system ExciterExciter
systemsystem
Vibrating drum ..........................................................
VibratingVibrating
drum ..........................................................
drum ..........................................................
front + rear frontfront +front
+ rear rear+ rear front + rear
front + rear
Weights
Drive system ............................................................
Drive system Drive............................................................
system ............................................................
hydrost. hydrost.
hydrost. hydrost. hydrost. hydrost.
Operating weight CECE ...........................................
Frequency ................................................................
Frequency Frequency Hz
................................................................ kg
................................................................
50/56 Hz 65
Hz 50/5650/5650/56 72
50/56 50/56
Basic
Amplitudeweight .............................................................
.................................................................
Amplitude Amplitude mm
................................................................. kg
.................................................................
0,50 mm mm64
0,500,50 0,50 71 0,50
0,50
Centrifugal force .......................................................
Centrifugal Centrifugal kN
force .......................................................
force .......................................................
39/48 kN kN 39/4845/5739/48 45/57 45/57
Dimensions
Sprinkler System Sprinkler Sprinkler
SystemSystem
Working width
Type of sprinkling ..........................................................
.....................................................
Type of sprinkling
Type of sprinkling
..................................................... mm
.....................................................
pressure 350
pressure
pressure
pressure 400 pressure
pressure
Capacities
Driving Capacities
Capacities
Characteristics
Fuel ..........................................................................
Fuel ..........................................................................
Fuel ..........................................................................
l 55,0 l l 55,055,0 55,0 55,0 55,0
Working speed, max. ...............................................
Water .......................................................................
Water .......................................................................
Water ....................................................................... l 310,0 m/min
l l 25
310,0
310,0310,0 25
310,0 310,0
Max. gradeability
Technical modifications (dep.
reserved. Machines
Technical
may be on
modifications
shown
Technical soil
withreserved. con.)
modifications
options. Machines
reserved. ........................
mayMachines
be shownmay
withbe shown with options. %
options. 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
79
TANDEM ROLLERS Standard Equipment
Hydrostatic travel and vibration drive
Optiona
*Foldab
BW 135 AD-5, BW 138 AD-5 2 scrapers per drum, spring loaded and
tiltable
Sun roo
Sun roo
Pressure sprinkler system with interval Weathe
switch Weathe
Multi function travel lever Seat he
Multi-function display incl. operating hour ECONO
meter display
Water level Temper
Electronic fuel gauge BOMAG
Emergency STOP Indicato
Individual control, vibration Rotary
Intelligent Vibration Control (IVC) Optiona
Integrated stowage compartment Lighting
Sliding seat incl. double travel lever Battery
Seat contact switch Environ
12V socket Theft pr
Working lights front and rear Edge cu
Vandalism protection Gravel
Lockable engine hood made of composite Hydrau
material Pointer
Lashing eyes, galvanized Special
Single point lifting device Backup
Back-up alarm technol
Flow div
2. Ampl
Standard Equipment Optional Equipment ECOST
Hydrostatic travel and vibration drive *Foldable ROPS incl. seat belt
2 scrapers per drum, spring loaded and Sun roof, rigid
Fields of application:
* Stand
tiltable Sun roof, foldable with ROPS (valid w
Compaction of asphalt layers, wear courses Pressure
and frost blanket
sprinkler system with interval Weather protection for sun roof
switch Weather protection cabin
layers in new constructions and repair workMultionfunction
confined, small
travel lever Seat heating
and medium scale construction projects, Multi-function
e.g. walkways andoperating hour
display incl. ECONOMIZER with asphalt temperature
80
TECHNICAL
Technical Data
DATA
Technical
Technical
Data Data BOMAG BOMAG
BOMAG
BOMAG BOMAG BOMAG
BW 135 AD-5 BW
BW 138
BW
135 AD-5
135 AD-5 BW 138BW
AD-5 AD-5
138 AD-5
Weights Weights
Weights
Operating weight w. ROPS Operating
CECE Operating
...........................
weight w.weight ROPSw. CECEROPS
kg ...........................
CECE 4.000 kg
........................... 4.500 4.000
kg 4.000 4.500 4.500
Average static linear loadAverage
CECE ..............................
static
Average linear
static
load linear
CECE load
kg/cm
..............................
CECE ..............................
15,4 kg/cm kg/cm 16,3 15,4
15,4 16,3 16,3
Grossweight .............................................................
Grossweight Grossweight
.............................................................
.............................................................
kg 4.200 kg 4.700 4.200
kg 4.200 4.700 4.700
Dimensions Dimensions
Dimensions
Working width ..........................................................
Working width Working ..........................................................
width ..........................................................
mm 1.300 mm mm1.300
1.380 1.300 1.380 1.380
Track radius, inner ...................................................
Track radius, Trackinnerradius,
...................................................
inner ...................................................
mm 2.665 mm mm2.665
2.616 2.665 2.616 2.616
Driving Characteristics
DrivingDriving
Characteristics
Characteristics
Speed .......................................................................
Speed ....................................................................... km/h
Speed .......................................................................
km/h 0- 10,0 km/h 0- 10,00- 10,0
0- 10,0 0- 10,0 0- 10,0
Working speed with vibration Working...................................
speed
Working withspeed
vibration
with vibration
...................................
km/h ...................................
0- 10,0 km/h km/h 0- 10,00- 10,0
0- 10,0 0- 10,0 0- 10,0
3
Asphalt
Max. gradeability without/with Max. vibr.
gradeability
Max.
..........................
gradeability
without/with without/with
vibr.
% ..........................
vibr.40/30 %
.......................... % 40/30
40/30 40/30 40/30 40/30
0,136 Drive Drive Drive
Engine manufacturer ................................................
Engine manufacturer
Engine manufacturer................................................
................................................
Kubota KubotaKubota
Kubota Kubota Kubota
0,167 Type .........................................................................
Type .........................................................................
Type .........................................................................
V2403 V2403V2403
V2403 V2403 V2403
Emission stage .........................................................
EmissionEmissionstage .........................................................
stage .........................................................
Stage V / TIER4f Stage V /Stage
Stage VTIER4f V / TIER4f
/ TIER4f Stage V /Stage
TIER4fV / TIER4f
Exhaust gas aftertreatment Exhaust
......................................
gas
Exhaustaftertreatment
gas aftertreatment DPF
......................................
...................................... DPF DPF DPF DPF DPF
Cooling ..................................................................... water
Cooling .....................................................................
Cooling ..................................................................... water water
water water water
Number of cylinders .................................................
Number of Number
cylinders of cylinders 4
.................................................
................................................. 4 4 4 4 4
Performance ISO 14396 ..........................................
Performance Performance
ISO 14396 ISO 34,1
..........................................
14396 kW
kW.......................................... kW 34,134,1 34,1 34,1 34,1
ng bow, Performance SAE J 1995Performance ........................................
Performance
SAE J 1995 45,7
SAE........................................
J 1995 hp
hp ........................................ hp 45,745,7 45,7 45,7 45,7
Speed .......................................................................
Speed .......................................................................
Speed .......................................................................
min-1 2.400 min-1 min-1 2.400 2.400
2.400 2.400 2.400
Speed adjustment 1 .................................................
Speed adjustment
Speed adjustment 2.300
1 ................................................. min-1
1 .................................................
min-1 min-1 2.300 2.300
2.300 2.300 2.300
dle
Dimensions
Speed adjustment 2 in mm
.................................................
Speed adjustment
Speed adjustment 2.530
2 ................................................. min-1
2 .................................................
min-1 min-1 2.530 2.530
2.530 2.530 2.530
e plate Electric equipment ...................................................
Electric equipment
Electric equipment
................................................... V
...................................................
V 12 V 12 12 12 12 12
w oil H drum H1 drumH2
Driven drum .............................................................
Driven Driven L L1 frontW + rear
.............................................................
............................................................. front
front +front
rear + rear
+ rear front + rear
front + rear
BP 10/35
Brakes 658Brakes
Brakes 962 700 1084 532 350
Service brake ...........................................................
Service brake Service ...........................................................
brake ...........................................................
hydrost. hydrost.
hydrost.
hydrost. hydrost. hydrost.
BP 12/40
Parking 658brake
Parking 962
Parking 700
brake ........................................................... 1084 542hydromec. 400
...........................................................
brake ........................................................... hydromec.
hydromec.
hydromec. hydromec.hydromec.
Steering Steering
Steering
Steering system .......................................................
Steering systemSteering.......................................................
system .......................................................
oscil.artic. oscil.artic.
oscil.artic.
oscil.artic. oscil.artic.oscil.artic.
Technical
Steering method Data
.......................................................
Steering method
Steering.......................................................
method .......................................................
hydrost. hydrost.
hydrost.
BOMAG hydrost. hydrost.
BOMAG hydrost.
Steering / oscillating angle Steering
+/- ..................................
/Steering
oscillating / oscillating
angle +/- angle..................................
grad +/- ..................................
32/10 grad 32/10 32/10
grad32/10 32/10 32/10
Crab walk .................................................................
Crab walkCrab .................................................................
walk .................................................................
0- 50 BP 0-10/35
0- 50 50 0- 50 BP
0- 50 12/400- 50
Exciter system ExciterExciter
systemsystem
Weights
Vibrating drum ..........................................................
Vibrating Vibrating
drum ..........................................................
drum ..........................................................
front + rear front
front +front
rear + rear
+ rear front + rear
front + rear
Operating weightDrive CECE systemDrive...........................................
Drive system ............................................................
............................................................ kg
system ............................................................
hydrost. 65 hydrost.
hydrost. hydrost. 72 hydrost.
hydrost.
Basic
Frequencyweight .............................................................
................................................................
Frequency Frequency
................................................................ kg
................................................................
Hz 50/56 Hz Hz64 50/56 50/56
50/56 71 50/56
50/56
Amplitude .................................................................
AmplitudeAmplitude
.................................................................
.................................................................
mm 0,50 mm mm0,500,50 0,50 0,50 0,50
Dimensions
Centrifugal force .......................................................
Centrifugal Centrifugal
force .......................................................
force .......................................................
kN 39/48 kN 45/57 39/48
kN 39/48 45/57 45/57
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
81
TANDEM ROLLERS Standard Equipment
2 amplitudes / 2 frequencies
Opt
RO
BOMAG
Hellerwald
D-56154 Boppard
P.O. Box 5162
Tel. (0)6742 - 100
Fax (0)6742 - 309
Dimensions in mm
Dimensions in mm
A B C D H H2 K L O S W
A B C D H H2 K L O S W
BW 141 AD - 5 3300 1664 730 1100 2240 3000 250 4400 82 16 1500
BW 141 AD - 5 3300 1664 730 1100 2240 3000 250 4400 82 16 1500
BW 151BW - 5AD - 533003300 1844
AD151 1844 730
730 1100 2200
1100 220030003000
250 250
4400 4400 1682
82 168016 1680
BW 154BW - 5AD - 533003300 1844
AD154 1844 730
730 1100 2240
1100 224030003000
250 250
4400 4400 1682
82 168016 1680
82
TECHNICAL DATA
Technical Data Technical
Technical
Data
Technical
BOMAG
Data Data BOMAG
BOMAGBOMAG BOMAG
BOMAG BOMAG BOMAG BOMAG BOMAG BOMAG BOMAG
BW 141 AD - 5 BWAD
BW 151 141
- 5AD141
BW -BW
5AD
BW
141
- 5154
AD
BW-AD BW
- 5AD151
5151 5AD151
-BW - 5AD
BW- 5154
BWAD154
-BW
5AD154
- 5AD - 5
Weights Weights
Weights
Weights
Operating weight CECE w. cab. ........ kgweightOperating
Operating
Operating CECE
weight
6.900w.CECE
weight
cab. ........
w.CECE
cab. ........ kg ........
w. cab. kg 6.900
7.600 kg 6.900 6.9008.300 7.600 7.600 7.600 8.300 8.300 8.300
Axle load, front CECE .......................Axle load, kgfront
Axle load,
CECE
Axle
front
load,
.......................
CECE
3.560 front.......................kg 3.900
CECE ....................... kg 3.560kg 3.560 3.5604.250 3.900 3.900 3.900 4.250 4.250 4.250
Axle load, rear CECE ........................Axle load, kgrear
Axle load,
CECE
Axle
rearload,
........................
CECE
3.340 rear........................kg 3.700
CECE ........................ kg 3.340kg 3.340 3.3404.050 3.700 3.700 3.700 4.050 4.050 4.050
Static linear load, front CECE ...........Static linear kg/cm
Static
load,
linear
Static
front
load,
linear
CECE
23,7 front
load,
...........
CECE CECEkg/cm
front........... 23,2kg/cm
........... 23,7kg/cm
23,7 23,7 25,3 23,2 23,2 23,2 25,3 25,3 25,3
Static linear load, rear CECE ............Static linear kg/cm
Static
load,
linear
Static
rearload,
CECE
linear
22,3 rearload,
............
CECE CECEkg/cm
rear............ 22,0kg/cm
............ 22,3kg/cm
22,3 22,3 24,1 22,0 22,0 22,0 24,1 24,1 24,1
kg ......................................
Grossweight ......................................Grossweight
Grossweight
Grossweight kg 9.300
......................................
8.700 kg 8.700
...................................... kg 8.700 8.7009.900 9.300 9.300 9.300 9.900 9.900 9.900
Dimensions Dimensions
Dimensions
Dimensions
Track radius, inner ............................Track radius,
Track
mm inner
radius,
Track
............................
4.480
inner
radius, ............................
inner ............................
mm 4.390 mm 4.480
mm 4.480 4.4804.390 4.390 4.390 4.390 4.390 4.390 4.390
Drums DrumsDrumsDrums
3
Asphalt
Split drum ..........................................Split drum
Split
..........................................
drum Split
..........................................
no
drum ..........................................
no no no no front + rear
no no no front + rear
front + rear
front + rear
0,136 Driving Characteristics Driving Driving
Characteristics
Driving
Characteristics
Characteristics
0,167 Max. travel speed ..............................Max. travel
Max.
km/h
Max. gradeability without/with vibr. ...Max. gradeability
Max.
speed
travel
Max.
..............................
speed
% gradeability
Max.
0-travel
12,0..............................
without/with
40/30
speed ..............................
gradeability
without/with
vibr.without/with
km/h0- 12,0
... vibr. ...%vibr.40/30
km/h0- 12,0
...% 40/30
km/h0- 12,0
% 40/30
0- 12,0
0- 12,0 0- 12,0 0- 12,0 0- 12,0
40/3036/30 40/30 40/30 40/30
0- 12,0 0- 12,0 0- 12,0
36/30 36/30 36/30
Drive Drive Drive Drive
Engine manufacturer .........................Engine manufacturerEngine manufacturer
Engine Kubota
.........................
manufacturer
......................... Kubota Kubota Kubota Kubota
......................... Kubota Kubota Kubota Kubota Kubota Kubota Kubota
Type ..................................................Type ..................................................
Type ..................................................
TypeV3307 V3307 CR-T
..................................................
CR-T V3307 CR-TV3307 CR-T V3307
V3307 CR-TCR-T
V3307 CR-T V3307 CR-TV3307 CR-T
V3307 CR-T V3307 CR-T
V3307 CR-T
Emission stage ..................................EmissionEmission stage ..................................
Emission
stage
StageV..................................
stage
/ TIER4f
.................................. / TIER4f/StageV
StageVStageV StageV
TIER4f/StageV
TIER4f StageV TIER4f/StageV
/ TIER4f/StageV
/ TIER4f TIER4f/ TIER4f TIER4f/StageV
StageV /StageV TIER4f/ TIER4f
Exhaust gas aftertreatment ...............ExhaustExhaust gas aftertreatment
Exhaust
gasDOC+DPF
aftertreatment
gas...............
aftertreatment
............... DOC+DPF
............... DOC+DPF DOC+DPF DOC+DPF
DOC+DPF DOC+DPF DOC+DPF DOC+DPF DOC+DPF DOC+DPF DOC+DPF
ng bow,
Cooling ..............................................Cooling Cooling
..............................................
Cooling
..............................................
Liquid Liquid Liquid Liquid LiquidLiquid Liquid Liquid Liquid
.............................................. Liquid Liquid Liquid
Number of cylinders ..........................Number Number of cylindersNumber
of cylinders
..........................
4 of cylinders
.......................... 4
.......................... 4 4 4 4 4 4 4 4 4 4
dle Performance ISO 14396 ...................Performance kW ISOPerformance
Performance 1439655,4
ISO...................
14396 ISO................... kW 55,4
14396 ................... kW 55,4kW 55,4 55,4 55,4 55,4 55,4 55,4 55,4 55,4 55,4
Dimensions in mm
e plate Performance SAE J 1995 .................. Performancehp SAE
Performance Performance
J 1995
74,3
SAE..................
J 1995
SAE.................. hp 74,3
J 1995 .................. hp 74,3hp 74,3 74,3 74,3 74,3 74,3 74,3 74,3 74,3 74,3
w oil H Speed
Speed ................................................ H1 ................................................
H2 ................................................
min-1
Speed L 2.400
Speed L1 W min-12.400
................................................min-1 min-1
2.400 2.400 2.4002.400 2.400 2.400 2.400 2.400 2.400 2.400
Electric equipment ............................. V
Electric equipment
Electric equipment
Electric
.............................
12 equipment
.............................V 12 V 12 V 12
............................. 12 12 12 12 12 12 12 12
BP 10/35 658 962 700 1084 532 350
Brakes BrakesBrakesBrakes
BP 12/40
Service 658 Service
brake .................................... 962 brake
700....................................
Service 1084
brake
Servicehydrost. 542....................................
400
....................................
brake hydrost.hydrost. hydrost. hydrost.
hydrost.hydrost. hydrost. hydrost. hydrost. hydrost. hydrost.
Parking brake ....................................Parking Parking
brake ....................................
Parking
brake multi
....................................
brake
disc ....................................
multi disc
multi disc
multi disc
multi multi
disc disc
multi disc
multi disc
multi disc multi disc
multi disc
multi disc
Steering Steering
Steering
Steering
Technical
Steering system Data
................................SteeringSteering
system Steering
................................
system
oscil.artic.
................................
system ................................
oscil.artic.
oscil.artic.
BOMAG
oscil.artic.
oscil.artic.
oscil.artic.
oscil.artic.
BOMAG
oscil.artic.
oscil.artic. oscil.artic.
oscil.artic.
oscil.artic.
Exciter system ExciterExciter
system
Exciter
systemsystem
Vibrating drum ...................................VibratingVibrating front +drum
rear...................................
drum ...................................
Vibrating
drum ................................... front +BP
front 10/35
rear + rear + rear+ BP
front front
front + rear front +12/40
rear rear front + rear
front + rear front + rear front + rear
front + rear
Autom. vibr. shut off ..........................Autom. vibr.Autom. off standard
shutvibr.
Autom. ..........................
shutvibr.
off .......................... standard
shut off .......................... standardstandardstandard standardstandardstandardstandard standardstandardstandard
Weights
Frequency .........................................FrequencyFrequency
Hz.........................................
Frequency Hz 45/55
45/55 .........................................
......................................... Hz 45/55Hz 45/55 45/5545/55 45/55 45/55 45/55 45/55 45/55 45/55
Operating weight CECEAmplitude
Amplitude .......................................... ...........................................
Amplitude
mm 0,71/0,28
..........................................
Amplitude kg
mm 0,68/0,26
.......................................... mm65
.......................................... mm 0,71/0,28
0,71/0,28 0,71/0,28 72
0,61/0,30
0,68/0,260,68/0,260,68/0,26 0,61/0,300,61/0,300,61/0,30
89/65 89/65 89/65
Centrifugal force ................................Centrifugal
Basic kN forceCentrifugal
Centrifugal ................................
weight ............................................................. 75/45
force kN 75/45
................................
force ................................
kg 64 kN 75/45 75/4589/65 71
kN 75/45 75/45 75/45 75/45
Centrifugal force ................................Centrifugalt forceCentrifugal
Centrifugal 7,6/4,6
................................
force t
................................ 7,6/4,6
force ................................ t 7,6/4,6
t 7,6/4,6 7,6/4,69,1/6,6 7,6/4,6 7,6/4,6 7,6/4,6 9,1/6,6 9,1/6,6 9,1/6,6
Dimensions
Capacities CapacitiesCapacities Capacities
Fuel ...................................................
Working Fuel ...................................................
Fuel
l ...................................................
Fuel 125,0
width .......................................................... ...................................................
l
mm 125,0
l 350
125,0
l 125,0 125,0125,0 400
125,0 125,0 125,0 125,0 125,0 125,0
Water .................................................
Water .................................................
Water
l .................................................
Water 600,0
.................................................
l 600,0l 600,0
l 600,0 600,0600,0 600,0 600,0 600,0 600,0 600,0 600,0
Driving Characteristics
Technical modifications reserved. Machines may be shownTechnical
with options.
modifications
Technical modifications
reserved.
Technical
Machines
modifications
reserved.
mayMachines
be
reserved.
shownmay
with
Machines
beoptions.
shownmaywith
beoptions.
shown with options.
83
TANDEM ROLLERS Standard Equipment
2 amplitudes / 2 frequencies
Opti
RO
Fields of application: Emergency stop button 2 LED-lights for cabin roof (flatbeam)
On-board computer Edge cutter
Compaction of asphalt layers, wear courses and frost blanket
- engine speed Special painting
layers in new constructions and maintenance
- Speedometer work on Environmentally compliant hydraulic oil
medium to large scale construction- Fuelprojects, e.g. roads,
consumption Radio/Radio preparation
- Engine temperature ROPS/FOPS with safety belt
agricultural roads and parking lots. The BW 154
V-belt protection
AD-5 has Asphalt temperature display
split drums, this eases work in curves.
Pressure sprinkling system with 2 pumps Lighting for drum edge front and rear
Indicator and hazard lights Seat heating
BOMAG
Hellerwald
D-56154 Boppard
P.O. Box 5162
Tel. (0)6742 - 1000
Fax (0)6742 - 3090
Dimensions in mm
Dimensions
A in mm
B C D H H2 K L O S W
A B C D H H2 K L O S W
BW 151 AD-5 H 3300 1844 730 1100 2200 3000 250 4400 82 16 1680
BW 151 AD-5 H 3300 1844 730 1100 2200 3000 250 4400 82 16 1680
BW 151 AD-5 SH 3300
BW 151 AD-5 SH 3300
1844
1844
730
730
1100
1100 2200
2200
3000
3000
250
250
4400 82
440016
82 1680
16 1680
BW 154 AD-5 AD-53300
BW 154SH SH 33001844
1844 730
730 1100 22402240
1100 3000 3000
250 250
4400 82440016 82 1680 16 1680
84
TECHNICAL DATA
Technical Data Technical
Technical
Data Data
BOMAG
Technical Data BOMAG
BOMAG BOMAGBOMAG BOMAG
BOMAG BOMAGBOMAG BOMAG BOMAGBOMAG
BW 151 AD-5 H BW BW
151 151
AD-5
BWAD-5
SH
151
BWHAD-5
BW
151 BW
154 151
HAD-5 AD-5
HBW AD-5
SH
151
BWSH
AD-5
151SHBW 154
AD-5 BW
SH AD-5
154
BWSH
AD-5
154SH
AD-5 SH
Weights Weights
Weights
Weights
Operating weight CECE w. cab. ........ Operating kg Operating
Operating
weight CECE
weight w.CECE
8.420 cab. ........
weight w.CECE
cab. ........ kg ........
w. cab. kg 8.420
9.020 kg 8.420 8.420 9.1209.020 9.020 9.020 9.120 9.120 9.120
Axle load, front CECE .......................Axle load, kgload,
Axle
front CECE front
Axle .......................
load,CECE
4.310 kg
front.......................
CECE ....................... kg 4.310
4.610 kg 4.310 4.310 4.6604.610 4.610 4.610 4.660 4.660 4.660
Axle load, rear CECE ........................Axle load, kgload,
Axle
rear CECE rearload,
Axle ........................
CECE
4.110 kg
rear........................
CECE ........................ kg 4.110
4.410 kg 4.110 4.110 4.4604.410 4.410 4.410 4.460 4.460 4.460
Static linear load, front CECE ........... Static linearkg/cm
Static
load,
linearfront
Staticload,CECE
25,7front
linear ...........
CECE
load, front...........
CECE kg/cm kg/cm
...........27,4 25,7
25,7kg/cm 25,7 27,7 27,4 27,4 27,4 27,7 27,7 27,7
Static linear load, rear CECE ............ Static linearkg/cm
Static
load,
linearrear
Staticload,
CECE
24,5rearload,
linear ............
CECE CECEkg/cm
rear............ ............kg/cm
26,3 24,5
24,5kg/cm 24,5 26,5 26,3 26,3 26,3 26,5 26,5 26,5
Grossweight ......................................
Grossweight kg......................................
Grossweight ......................................
9.300 kg
Grossweight ...................................... kg
9.300 kg 9.300
9.300 9.300 9.9009.300 9.300 9.300 9.900 9.900 9.900
Dimensions Dimensions
Dimensions
Dimensions
Track radius, inner ............................
Track radius,
Track
mm inner
radius,
............................
Track inner
4.390
radius,............................mm 4.390
mm 4.390
inner ............................ mm 4.390 4.390 4.3904.390 4.390 4.390 4.390 4.390 4.390
3 Drums DrumsDrumsDrums
Asphalt
Split drum ..........................................
Split drum
Split
..........................................
drum ..........................................
Split no ..........................................
drum no no no no front no
+ rear no no front + rear
front + rear
front + rear
0,136
Driving Characteristics Driving
Driving
Characteristics
Characteristics
Driving Characteristics
0,167 Max. travel speed ..............................
Max. travel
Max.
km/h
speed
travel
..............................
speed
Max. 0- 12,0
travel ..............................
km/h 0-km/h
speed .............................. 12,0
0- 12,0 0- 12,0 0- 12,0 0- 12,0
km/h 0- 12,0 0- 12,0 0- 12,0 0- 12,0 0- 12,0 0- 12,0
Max. gradeability without/with vibr.Max. ... gradeability
Max.
% gradeability
without/with
Max. 40/30
without/with
gradeability vibr.without/with
... vibr. ...%vibr. ...40/30
% 40/30 % 40/30 40/30 36/3040/30 40/30 40/30 36/30 36/30 36/30
Drive Drive Drive Drive
Engine manufacturer ......................... Engine manufacturer
Engine manufacturer
Engine .........................
Kubota .........................
manufacturer ......................... Kubota Kubota KubotaKubota
Kubota Kubota Kubota Kubota Kubota Kubota Kubota
Type ..................................................
Type ..................................................
Type ..................................................
V3307 CR-T
Type .................................................. V3307V3307 V3307 CR-T
CR-TCR-T V3307
V3307 CR-T CR-TCR-T
V3307 V3307 CR-TV3307 CR-T
V3307 CR-T V3307 CR-T
V3307 CR-T
Emission stage .................................. EmissionEmission
stage ..................................
stage StageV
..................................
/ TIER4f
Emission stage .................................. StageV /
StageV StageV
TIER4f
/ TIER4f/ StageV
TIER4f /
StageV
StageV / TIER4f TIER4f
/
StageV
TIER4f/ TIER4f StageV /StageV
StageV / TIER4f TIER4f/StageV
TIER4f / TIER4f
ng bow, Exhaust gas aftertreatment ............... ExhaustExhaust
gas aftertreatment
gas aftertreatment
Exhaust DOC+DPF
gas ............... DOC+DPF
..............................
aftertreatment DOC+DPF DOC+DPF DOC+DPF
DOC+DPF DOC+DPF DOC+DPF DOC+DPF DOC+DPF DOC+DPF DOC+DPF
Cooling ..............................................
Cooling Cooling
..............................................
..............................................
Cooling Liquid
.............................................. Liquid Liquid Liquid Liquid
Liquid Liquid Liquid Liquid Liquid Liquid Liquid
dle Number of cylinders .......................... Number Number
of cylinders of cylinders
Number..........................
4 of cylinders
..........................
..........................4 4 4 4 4 4 4 4 4 4 4
Dimensions
Performance ISO 14396 in mm ...................
Performance kWISOPerformance
Performance 14396 ISO55,4
...................
14396 ................... kW 55,4
kW 55,4 55,4 55,4 55,4 55,4 55,4 55,4
e plate ISO 14396 ................... kW 55,4 55,4 55,4
Performance SAE J 1995 ..................
H Performance
H1 H2 L hp
Performance
SAE J 1995
SAE
Performance74,3 ..................
J 1995
L1 WSAE ..................
J 1995 hp 74,3
..................hp 74,3 hp 74,3 74,3 74,3 74,3 74,3 74,3 74,3 74,3 74,3
w oil Speed ................................................
Speed ................................................
Speedmin-1 ................................................
Speed 2.400 min-1 2.400
................................................ min-1
2.400min-12.400 2.400 2.4002.400 2.400 2.400 2.400 2.400 2.400
BP 10/35
Electric 658 Electric
equipment ............................. 962 equipment
700
V
Electric 1084
equipment 532 .............................
.............................
Electric 12 350 V
.............................
equipment V 12 V 12
12 12 12 12 12 12 12 12 12
Brakes
BP 12/40 658 Brakes
962 Brakes
700 Brakes
1084 542 400
Service brake ....................................
Service brake
Service
....................................
brake
Service ....................................
hydrost.
brake .................................... hydrost.
hydrost. hydrost. hydrost.hydrost.
hydrost. hydrost. hydrost. hydrost. hydrost. hydrost.
Parking brake ....................................
Parking Parking
brake ....................................
brake
Parking ....................................
multi
brakedisc multi multi
.................................... disc discmulti discmulti disc
multi multi
disc discmulti discmulti disc multi disc
multi discmulti disc
Steering Data
Technical SteeringSteering Steering
Steering system ................................
SteeringSteering
system ................................
system oscil.artic.
................................
Steering system ................................ BOMAG
oscil.artic.
oscil.artic.
oscil.artic. BOMAG
oscil.artic.
oscil.artic. oscil.artic.
oscil.artic.
oscil.artic. oscil.artic.
oscil.artic.
oscil.artic.
Exciter system ExciterExciter
system systemsystem
Exciter BP 10/35 BP 12/40
Vibrating drum ...................................
VibratingVibrating
drum ...................................
drum front
Vibrating ...................................
+ rear
drum front front
................................... + rear+ rear
front + rear front front
front + rear + rear+ rear
front + rear
front + rear front + rear
front + rear
front + rear
Autom. vibr. shut off ..........................
Autom. vibr.
Autom.
shutvibr.
off ..........................
Autom.shutstandard
off ..........................
vibr. shut off .......................... standard
standardstandardstandard standard
standardstandardstandard standardstandardstandard
Weights
Frequency .........................................
Frequency Frequency
Hz
.........................................
.........................................
Frequency 45/55 Hz 45/55
Hz 45/55
......................................... Hz 45/55 45/55 45/5545/55 45/55 45/55 45/55 45/55 45/55
Operating weight CECEAmplitude ...........................................
Amplitude .......................................... Amplitude
..........................................
mm Amplitude..........................................
0,68/0,26
kg 0,68/0,26
mm
65 mm 0,68/0,260,68/0,26
mm 0,68/0,26
..........................................
72 0,68/0,260,68/0,26
0,61/0,30
0,68/0,26 0,61/0,300,61/0,300,61/0,30
Basic weight
Centrifugal .............................................................
force ................................
Centrifugal kN
Centrifugal force75/45
force Centrifugal
................................
................................ kg 75/45
kN
force ................................ kN 6475/45 71
kN 75/45 75/45 89/6575/45 75/45 75/45 89/65 89/65 89/65
Centrifugal force ................................
Centrifugal tforce Centrifugal
Centrifugal force7,6/4,6
................................
................................t
force ................................ 7,6/4,6
t 7,6/4,6
t 7,6/4,6 7,6/4,6 9,1/6,6 7,6/4,6 7,6/4,6 7,6/4,6 9,1/6,6 9,1/6,6 9,1/6,6
Dimensions
Capacities CapacitiesCapacities Capacities
Working width ..........................................................
Fuel ...................................................
Fuel ...................................................
Fuel lmm 125,0
l ...................................................
125,0 l
Fuel ...................................................
350
125,0
l 125,0 400
125,0 125,0125,0 125,0 125,0 125,0 125,0 125,0
Water .................................................
Water .................................................
Waterl .................................................
600,0 l 600,0
l
Water ................................................. 600,0
l 600,0 600,0 600,0600,0 600,0 600,0 600,0 600,0 600,0
Driving Characteristics
Technical modifications reserved. Machines may be shown
Technical
with modifications
options.
Technical modifications
reserved. Machines
Technical reserved.
may Machines
bereserved.
modifications shown
may
with
beoptions.
shownmay
Machines withbe
options.
shown with options.
Working speed, max. ............................................... m/min 25 25
Max. gradeability (dep. on soil con.) ........................ % 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
85
TANDEM ROLLERS Standard Equipment
2 amplitudes / 2 frequencies
Opti
RO
Dimensions in mm
Dimensions in
A mm B C D H H2 K L O S W
A B C D H H2 K L O S W
BW 161 AD-5 3620 1836 670 1220 2315 3050 250 4840 78 17 1680
BWBW 161
190 AD-5
AD-5 3620
3620 1836
2146 670
670 1220
12202315231530503050
250 4840 4840
250 78 17
78 1680
19 1990
BWBW 190
202 AD-5
AD-5 3620
3620 2146
2291 670
670 1220
12202315231530503050
250 4840 4840
250 78 19
78 1990
19 2135
BW 202 AD-5 3620 2291 670 1220 2315 3050 250 4840 78 19 2135
86
TECHNICAL DATA
Technical Data Technical
Technical
Data
Technical
BOMAG
Data Data BOMAG
BOMAGBOMAGBOMAG
BOMAGBOMAG BOMAGBOMAG BOMAG BOMAGBOMAG
BW 161 AD-5 BW 190
BWAD-5
161
BWAD-5
161
BWAD-5
BW
161 202
AD-5
BWAD-5
190
BWAD-5
BW
190 190 AD-5
AD-5 BW 202
BWAD-5
202
BWAD-5
202 AD-5
Weights Weights
Weights
Weights
Operating weight CECE w. cab. ........ OperatingkgweightOperating
Operating CECE
weight
10.000w.CECE
weight
cab. ........
w.CECE
cab. ........ kg ........
w. cab. kg 10.000
12.050 kg 10.000 10.000
12.300 12.050 12.050 12.050 12.300 12.300 12.300
Axle load, front CECE .......................Axle load, kgfront
Axle load,
CECE
Axle
frontload,
.......................
5.100 CECE kg 6.200
front.......................
CECE ....................... kg 5.100kg 5.100 5.1006.350 6.200 6.200 6.200 6.350 6.350 6.350
Axle load, rear CECE ........................ kgrear
Axle load,
Axle load,
CECE
Axle
rear load,
........................
4.900CECE kg 5.850
rear........................
CECE ........................ kg 4.900kg 4.900 4.9005.950 5.850 5.850 5.850 5.950 5.950 5.950
Static linear load, front CECE ...........Static linear kg/cm
Static
load,
linear
Static
front
load,
30,4linear
CECE front
load,
...........
CECE front...........
CECE kg/cm 31,0kg/cm
........... 30,4kg/cm
30,4 30,4 29,7 31,0 31,0 31,0 29,7 29,7 29,7
Static linear load, rear CECE ............Static linear kg/cm
Static
load,
linear
Static
rearload,
CECE
29,2linear
rearload,
............
CECE CECEkg/cm
rear............ 29,3kg/cm
............ 29,2kg/cm
29,2 29,2 27,9 29,3 29,3 29,3 27,9 27,9 27,9
kg ......................................
Grossweight ......................................Grossweight
GrossweightGrossweight
......................................kg 13.000
11.000 ...................................... kg 11.000
kg 11.000 13.500 13.000
11.000 13.000 13.000 13.500 13.500 13.500
Dimensions Dimensions
Dimensions
Dimensions
Track radius, inner ............................Track radius,
Track
mm inner
radius,
Track
............................
4.900
inner
radius,............................
inner ............................
mm 4.745 mm 4.900
mm 4.900 4.9004.673 4.745 4.745 4.745 4.673 4.673 4.673
Length (without towing hitch) ............Length (without
Length
mm (without
towing
Length4.840
hitch)
(without
towing ............
hitch)
towing ............
hitch)mm ............
4.840
mm 4.840
mm 4.840 4.8404.840 4.840 4.840 4.840 4.840 4.840 4.840
3
Asphalt
Driving Characteristics Driving
Driving
Characteristics
Driving
Characteristics
Characteristics
0,136 Max. travel speed ..............................
Max. travel
Max.
km/h
speed
travel
Max.
..............................
speed
0-travel
12,0 ..............................
speed ..............................
km/h0- 15,0
km/h0- 12,0
km/h
0- 12,0 0- 12,0
0- 12,00- 15,0 0- 15,0 0- 15,0 0- 12,0 0- 12,0 0- 12,0
Max. gradeability without/with vibr. ...Max. gradeability
Max.
% gradeability
Max.
without/with
35/30
gradeability
without/with
vibr.without/with
... vibr. ...%vibr.35/30
...% 35/30 % 35/30 35/3035/30 35/30 35/30 35/30 35/30 35/30 35/30
0,167
Drive Drive Drive Drive
Engine manufacturer ......................... Engine manufacturer
Engine manufacturer
Engine .........................
Deutz manufacturer
......................... Deutz Deutz Deutz DeutzDeutz Deutz Deutz Deutz
......................... Deutz Deutz Deutz
Type ..................................................
Type ..................................................
Type ..................................................
TypeTCD TCD 3.6
..................................................
3.6 L4 TCDL4 3.6TCD L4 TCD
L4 3.6 TCD 3.6 L4 TCD
3.6 L4 3.6TCD L4 3.6 L4 TCD 3.6TCD
L4 3.6 TCD L4 3.6 TCD
L4 3.6 L4
Emission stage .................................. EmissionEmission
stage ..................................
Emission
stageStage..................................
stage Stage IV
..................................
IV / TIER4f Stage IVStage
/ TIER4f/ TIER4f
IVStage Stage
/ TIER4f Stage
IV
IV / TIER4f IVStage
/ TIER4f/ TIER4f
IVStage
/ TIER4f Stage IVStage
IV / TIER4f / TIER4f
IVStage
/ TIER4f
IV / TIER4f
Exhaust gas aftertreatment ............... ExhaustExhaust
gas aftertreatment
Exhaust
gas DOC+SCR
aftertreatment
gas ...............
aftertreatment DOC+SCR
.............................. DOC+SCR DOC+SCR DOC+SCR
DOC+SCR DOC+SCR DOC+SCR DOC+SCR DOC+SCR DOC+SCR DOC+SCR
Cooling ..............................................
Cooling Cooling
..............................................
..............................................
CoolingLiquid Liquid Liquid Liquid LiquidLiquid Liquid Liquid Liquid
.............................................. Liquid Liquid Liquid
ng bow, Number of cylinders ..........................Number Number of cylinders Number
of cylinders
..........................
4 of cylinders
.......................... 4
.......................... 4 4 4 4 4 4 4 4 4 4
Performance ISO 14396 ...................Performance kW ISOPerformance
Performance 14396 ISO...................
95,0 14396 ISO................... kW 95,0
14396 ................... kW 95,0kW 95,0 95,0 95,0 95,0 95,0 95,0 95,0 95,0 95,0
dle Performance SAE J 1995 .................. hp SAE
Performance
Performance Performance
J 1995
SAE..................
127,0 J 1995SAE.................. hp 127,0
J 1995 .................. hp 127,0 hp 127,0 127,0127,0 127,0 127,0 127,0 127,0 127,0 127,0
Dimensions in mm
Speed ................................................
Speed ................................................
Speed
min-1 ................................................
Speed min-12.300 2.300 2.300 2.3002.300 2.300 2.300 2.300 2.300 2.300 2.300
e plate ................................................
2.300 min-1 min-1
Electric equipment .............................
H Electric H1 equipment
Electric
VH2 equipmentElectric
L.............................
12 equipment
.............................
L1 .............................
W V 12 V 12 V 12 12 12 12 12 12 12 12 12
w oil
Brakes
BP 10/35 658 Brakes 962 Brakes Brakes
700....................................
1084 532 350
Service brake ....................................Service brake
Service brake
Service
hydrost.
....................................
brake ....................................
hydrost.hydrost. hydrost. hydrost.
hydrost.hydrost. hydrost. hydrost. hydrost. hydrost. hydrost.
BP 12/40
Parking 658 Parking
brake .................................... 962 Parking
700....................................
brake 1084
brake
Parkingmulti 542....................................
400
....................................
brake
disc multi disc
multi disc
multi discmulti multi
disc disc
multi disc
multi discmulti disc multi disc
multi discmulti disc
Steering Steering
Steering
Steering
Steering system ................................SteeringSteering
system Steering
................................
systemoscil.artic.
................................
system ................................
oscil.artic.
oscil.artic.
oscil.artic.
oscil.artic.
oscil.artic.
oscil.artic.
oscil.artic.
oscil.artic. oscil.artic.
oscil.artic.
oscil.artic.
Technical Data
Exciter system ExciterExciter
system
Exciter
systemsystem BOMAG BOMAG
Vibrating drum ...................................VibratingVibrating front +drum
drum ...................................
Vibrating
drum ................................... front + rear
front + rear
rear................................... front front
front + rear front + rear
+ rear+ rear front + rear
front + rear front + rear
front + rear
front + rear
Autom. vibr. shut off ..........................Autom. vibr.Autom.shutvibr.
Autom.standard
off ..........................
shut vibr.
off .......................... BP
standard
shut off .......................... 10/35
standard standardstandardstandardBP 12/40
standard standardstandard standardstandardstandard
Frequency .........................................
Frequency Hz.........................................
Frequency Hz 40/55
40/53 .........................................
Frequency
......................................... Hz 40/53Hz 40/53 40/5340/53 40/55 40/55 40/55 40/53 40/53 40/53
Amplitude ..........................................
Weights Amplitude mm
Amplitude 0,87/0,44
..........................................
Amplitude
..........................................mm 0,90/0,34 mm 0,87/0,44
.......................................... mm 0,87/0,440,87/0,44 0,90/0,34
0,84/0,31 0,90/0,340,90/0,34 0,84/0,310,84/0,310,84/0,31
Centrifugal force ................................CentrifugalkNforce Centrifugal
Centrifugal 95/90
................................
force ................................kN 126/88
force ................................ kN 95/90kN 95/90 95/90126/88 126/88 126/88 126/88 126/88 126/88 126/88
Operating weight CECECentrifugal
Centrifugal force ................................
...........................................
t force Centrifugal
Centrifugal 9,7/9,2
................................
force ................................
kg
t
65
12,8/9,0
force ................................ t 9,7/9,2
t 9,7/9,2 9,7/9,2
72
12,8/9,012,8/9,012,8/9,0 12,8/9,0 12,8/9,012,8/9,0 12,8/9,0
Basic weight ............................................................. kg 64 71
Capacities Capacities
Capacities
Capacities
Dimensions
Fuel ...................................................
Fuel ...................................................
Fuel
l ...................................................
Fuel 145,0
...................................................
l 145,0
l 145,0
l 145,0 145,0145,0 145,0 145,0 145,0 145,0 145,0 145,0
Water .................................................
Water .................................................
Water
l .................................................
Water 750,0
.................................................
l 750,0
l 750,0
l 750,0 750,0750,0 750,0 750,0 750,0 750,0 750,0 750,0
Working width ..........................................................
Technical modifications reserved. Machines may be shown
Technical
with options.
modifications
Technical modifications
reserved.
Technical
Machines
modifications
reserved.
may Machines
bereserved.
shown
may
with
Machines
mm
beoptions.
shownmaywithbe
options.
350
shown with options.
400
Driving Characteristics
Working speed, max. ............................................... m/min 25 25
Max. gradeability (dep. on soil con.) ........................ % 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
87
TANDEM ROLLERS Standard Equipment
2 amplitudes / 2 frequencies
Opti
RO
BOMAG
Hellerwald
D-56154 Boppard
P.O. Box 5162
Tel. (0)6742 - 1000
Fax (0)6742 - 3090
Dimensions in mm
Dimensions in mm
AA B
B CC DD H H H2 H2
K K
L OL S O W S W
BW 191
BW AD-5
191 AD-5 3900
3900 2178
2178 760
760 140023642364
1400 3093 3093
250 250
5300 895300 19 89 200019 2000
BW AD-5
BW 206 206 AD-5 3900
3900 2313
2313 760
760 1400
140023642364
3093 250
3093 5300
250 895300 19 89 213519 2135
88
TECHNICAL
Technical Data
DATA
Technical
Technical
Data Data BOMAG BOMAG
BOMAG
BOMAG BOMAGBOMAG
BW 191 AD-5 BWBW
191
206
BW
AD-5
AD-5
191 AD-5 BW 206BW
AD-5
206 AD-5
Weights Weights
Weights
Operating weight CECE w. Operating
cab. ..............................
Operating
weight CECE weight w. CECE
cab.kg .............................. kg
w. cab. ..............................
13.500 kg 13.500
14.10013.500 14.100 14.100
Axle load, front CECE ..............................................
Axle load,Axle frontload,
CECE front..............................................
CECEkg kg
..............................................
6.650 kg 6.650
6.950 6.650 6.950 6.950
Axle load, rear CECE ...............................................
Axle load,Axle rearload,
CECE rear...............................................
CECE kg ...............................................
6.850 kg kg 6.850
7.150 6.850 7.150 7.150
Static linear load, front CECEStatic..................................
linear
Static
load,linear
frontload,
CECE front
.................................. kg/cm
CECE ..................................
kg/cm 33,3 kg/cm
33,332,6 33,3 32,6 32,6
Static linear load, rear CECE Static...................................
linear
Static
load,linear
rearload,
CECE rear
................................... kg/cm
CECE ...................................
kg/cm 34,3 kg/cm
34,333,5 34,3 33,5 33,5
Grossweight .............................................................
Grossweight Grossweight
.............................................................
kg 14.600 kg
............................................................. kg 14.600
16.00014.600 16.000 16.000
Dimensions Dimensions
Dimensions
Track radius, inner ...................................................
Track radius, Track inner
radius,
...................................................
inner ...................................................
mm 5.190 mm mm5.190
5.117 5.190 5.117 5.117
Driving Characteristics
DrivingDriving
Characteristics
Characteristics
3
Asphalt
Max. travel speed .....................................................
Max. travel Max.speedtravel
.....................................................
speed .....................................................
km/h 0- 12,0 km/h km/h
0- 12,0
0- 12,00- 12,0 0- 12,0 0- 12,0
0,136 Drive Drive Drive
Deutz
Deutz Deutz Deutz
0,167 Engine manufacturer ................................................
Engine manufacturer
Engine manufacturer ................................................
Type .........................................................................
................................................
Deutz
Type .........................................................................
Type .........................................................................
TCD 4.1 L04 TCD 4.1 4.1
TCD L04
TCDL044.1 L04
Deutz
TCD 4.1 L04
TCD 4.1 L04
Emission stage .........................................................
Emission Emissionstage .........................................................
stage .........................................................
Stage IV / TIER4f Stage IV /Stage
Stage TIER4f
IV IV / TIER4f
/ TIER4f Stage IV /Stage
TIER4fIV / TIER4f
Exhaust gas aftertreatment Exhaust
......................................
gas
Exhaust
aftertreatment
gas aftertreatment
......................................
......................................
DPF+SCR DPF+SCR
DPF+SCR DPF+SCR DPF+SCR DPF+SCR
Cooling .....................................................................
Cooling .....................................................................
Cooling .....................................................................
Liquid Liquid
Liquid Liquid Liquid Liquid
Number of cylinders .................................................
Number ofNumber cylinders of cylinders
.................................................
.................................................
4 4 4 4 4 4
Performance ISO 14396 Performance ..........................................
Performance
ISO 14396 ISO..........................................
14396 kW
kW..........................................
105,0 kW105,0105,0 105,0 105,0 105,0
ng bow, Performance SAE J 1995Performance ........................................
Performance
SAE J 1995 SAE ........................................
J 1995 hp
hp ........................................
141,0 hp 141,0
141,0 141,0 141,0 141,0
Speed .......................................................................
Speed ....................................................................... min-1
Speed .......................................................................
min-1 2.300 2.300
min-1 2.300 2.300 2.300 2.300
dle Electric equipment ...................................................
Electric equipment
Electric equipment
...................................................
...................................................
V 12 V V 12 12 12 12 12
Dimensions in mm
e plate Brakes BrakesBrakes
w oil H brake H1
Service H2
Service brake ...........................................................
Service L L1 hydrost. W
...........................................................
brake ........................................................... hydrost.
hydrost.hydrost. hydrost. hydrost.
Parking brake ...........................................................
Parking brake Parking ...........................................................
brake ...........................................................
multi disc multi
multi
discdisc
multi disc multi discmulti disc
BP 10/35 658 962 700 1084 532 350
Steering Steering
Steering
BP 12/40
Steering 658system 962.......................................................
700.......................................................
system .......................................................
Steering Steering system 1084 542oscil.artic. 400 oscil.artic.
oscil.artic.
oscil.artic. oscil.artic.oscil.artic.
Exciter system ExciterExciter
systemsystem
Vibrating drum ..........................................................
Vibrating Vibrating front + rear
drum ..........................................................
drum .......................................................... front + rear
front +front
rear + rear front + rear
front + rear
Technical
Autom. vibr. shutData
off .................................................
Autom. vibr. Autom.shut vibr. standard
off .................................................
shut off ................................................. standard
BOMAG
standard
standard standard standard
BOMAG
Frequency ................................................................
Frequency Frequency 40/50
................................................................ Hz
................................................................
Hz Hz 40/50
40/50 40/50 40/50 40/50
Amplitude .................................................................
AmplitudeAmplitude 0,94/0,44 mm
.................................................................
.................................................................
mm BP
mm 10/35
0,94/0,44 0,94/0,44
0,92/0,42 BP 12/40
0,92/0,42 0,92/0,42
Centrifugal force .......................................................
Centrifugal Centrifugal
force .......................................................
force .......................................................
kN 129/94 kN kN 129/94
129/95129/94 129/95 129/95
Centrifugal force .......................................................
Centrifugal Centrifugal
force ....................................................... t
force .......................................................
t 13,1/9,6 t 13,1/9,6 13,1/9,6
13,1/9,7 13,1/9,7 13,1/9,7
Weights
Operating
Capacities weightCapacities CECE ........................................... kg
Capacities 65 72
Fuel ..........................................................................
Fuel ..........................................................................
Fuel ..........................................................................
l 165,0 l l 165,0
165,0 165,0 165,0 165,0
Basic weight ............................................................. kg 64 71
Water .......................................................................
Water .......................................................................
Water .......................................................................
l 970,0 l l 970,0
970,0 970,0 970,0 970,0
Dimensions
Technical modifications reserved. Machines
Technical
may be
modifications
shown
Technical
withreserved.
options.
modifications
Machines
reserved.
may Machines
be shown may
with options.
be shown with options.
89
TANDEM ROLLERS Standard Equipment
ASPHALT MANAGER 2
Opti
RO
PRE 921 03 010 Compartments for documents and tools Seat heating
BOMAG OPERATION PANEL (BOP) Approval by the German TÜV
EVIB-Control panel BOMAG TELEMATIC POWER
Asphalt temperature display Outside mirrors
BCM-Documentation system
BOMAG
Hellerwald
D-56154 Boppard
P.O. Box 5162
Tel. (0)6742 - 1000
Fax (0)6742 - 3090
Dimensions in mm
Dimensions
A in mm
B C D H H2 K L O S1 S2 W
BW 151 AD - 5 AM3300 A 1844B 730C 1100 D H
2240 H2
3000 K250 L 4400O 82 S1 16S2 W
16 1680
BW 161 BW 151AM
AD-5 AD 3620
- 5 AM3300
18361844670730 1220
1100 2315
2240 3000
3050 250
250 4400
484082 78 16 1916 1680
17 1680
BW 161 AD-5 AM 3620 1836 670 1220 2315 3050 250 4840 78 19 17 1680
90
TECHNICAL
Technical Data
DATA
Technical
Technical
Data Data BOMAG BOMAG
BOMAG
BOMAG BOMAG BOMAG
BW 151 AD - 5 AM BW
BW 161
BW
151 ADAD-5
151
- 5 AD
AM- 5BW
AM AM 161BW
AD-5
161AM
AD-5 AM
Weights Weights
Weights
Operating weight CECE w. Operating
ROPS-cabinOperating
weight .................
CECE
weight w.CECE
ROPS-cabin
kgw. ROPS-cabin................. kg
7.900 ................. 10.2007.900
kg 7.900 10.200 10.200
Grossweight .............................................................
Grossweight Grossweight
.............................................................
.............................................................
kg 9.000 kg 11.5009.000
kg 9.000 11.500 11.500
Axle load, front CECE ..............................................
Axle load,Axle frontload,
CECE front..............................................
CECE kg ..............................................
4.050 kg kg 4.050
5.300 4.050 5.300 5.300
Axle load, rear CECE ...............................................
Axle load,Axle rearload,
CECE rear...............................................
CECE ...............................................
kg 3.850 kg kg 3.850
4.900 3.850 4.900 4.900
Static linear load, front CECE Static..................................
linear
Staticload,
linear
frontload,
CECE front..................................
24,1 kg/cm
CECE ..................................
kg/cm kg/cm 31,6 24,1
24,1 31,6 31,6
Static linear load, rear CECE Static ...................................
linear
Staticload,
linear
rearload,
CECE rear...................................
CECE ...................................
kg/cm 22,9 kg/cm kg/cm 29,2 22,9
22,9 29,2 29,2
Dimensions Dimensions
Dimensions
Track radius, inner ...................................................
Track radius, Trackinnerradius,...................................................
inner ...................................................
mm 4.390 mm mm4.390
4.900 4.390 4.900 4.900
Length (without towing hitch)Length ...................................
(without
Length towing
(withouthitch)towing ...................................
mm
hitch) ...................................
4.400 mm mm4.400
4.840 4.400 4.840 4.840
3
Asphalt
Driving Characteristics
DrivingDriving
Characteristics
Characteristics
0,136 Max. travel speed .....................................................
Max. travel Max.speed
travel .....................................................
speed .....................................................
km/h 0- 12,0 km/h km/h
0- 12,0
0- 12,0
0- 12,0 0- 12,0 0- 12,0
Max. gradeability without/with
Max. vibr.
gradeability
Max.
..........................
gradeability
without/with without/with
vibr.
% ..........................
vibr. 40/30
..........................
% % 40/30
40/30 40/30 40/30 40/30
0,167
Drive Drive Drive
Engine manufacturer ................................................
Engine manufacturer
Engine manufacturer ................................................
................................................
Kubota DeutzKubota
Kubota Deutz Deutz
Type .........................................................................
Type .........................................................................
Type .........................................................................
V3307 CR-T TCDCR-T
V3307 V3307
3.6 L4 CR-T TCD 3.6 TCD
L4 3.6 L4
Emission stage .........................................................
EmissionEmissionstage .........................................................
stage .........................................................
StageV / TIER4f Stage/ StageV
StageV TIER4f / TIER4f
IV / TIER4f Stage IV Stage IV / TIER4f
/ TIER4f
Exhaust gas aftertreatment Exhaust
......................................
gas
Exhaust
aftertreatment
gas aftertreatment
......................................
......................................
DOC+DPF DOC+SCR
DOC+DPF DOC+DPF DOC+SCR DOC+SCR
Cooling .....................................................................
Cooling .....................................................................
Cooling .....................................................................
Liquid LiquidLiquid
Liquid Liquid Liquid
ng bow, Number of cylinders .................................................
Number of Number
cylinders of cylinders
.................................................
.................................................
4 4 4 4 4 4
Performance ISO 14396 ..........................................
Performance Performance
ISO 14396 ISO ..........................................
14396 kW..........................................
55,4 kW kW 55,495,0 55,4 95,0 95,0
dle Performance SAE J 1995Performance ........................................
Performance
SAE J 1995 SAE........................................
J 1995 hp
hp ........................................
74,3 hp 74,3127,0 74,3 127,0 127,0
Dimensions in mm
Speed .......................................................................
Speed ....................................................................... min-1
Speed .......................................................................
min-1 2.400 min-1 2.300 2.400
2.400 2.300 2.300
e plate
Electric equipment ...................................................
Electric
H equipment
Electric
H1 H2 Lequipment
...................................................
...................................................
V L1 W 12 V V 12 12 12 12 12
w oil
Brakes
BP 10/35 Brakes 658Brakes 962 700 1084 532hydrost. 350
Service brake ...........................................................
Service brake Service ...........................................................
brake ........................................................... hydrost.
hydrost.hydrost. hydrost. hydrost.
Parking
BP brake ...........................................................
12/40 Parking
658brakeParking
962...........................................................
brake 700...........................................................
1084 542multi400 disc multi
multi
discdisc
multi disc multi discmulti disc
Steering Steering
Steering
Steering system .......................................................
Steering Steering
system .......................................................
system .......................................................
oscil.artic. oscil.artic.
oscil.artic.
oscil.artic. oscil.artic.
oscil.artic.
Technical Data ExciterExciter
Exciter system systemsystem BOMAG BOMAG
Vibrating drum ..........................................................
VibratingVibrating
drum ..........................................................
drum ..........................................................
rear rearrear rear rear rear
Autom. vibr. shut off .................................................
Autom. vibr. Autom.shutvibr.
off .................................................
shut off .................................................
standard BP 10/35
standard
standard
standard BP 12/40
standard standard
Frequency ................................................................
Frequency Frequency
................................................................ Hz
................................................................
Hz 46/45 46/45 46/45
Hz 46/45 46/45 46/45
Amplitude .................................................................
Weights Amplitude Amplitude
.................................................................
.................................................................
mm 0,68/0,27 mm mm0,68/0,27 0,68/0,27
0,87/0,44 0,87/0,440,87/0,44
Centrifugal force .......................................................
Centrifugal Centrifugal
force .......................................................
force .......................................................
kN 75/30 kN kN 75/30 75/30 97/51 97/51
Operating weightCentrifugal CECE ...........................................
Centrifugal force .......................................................
Centrifugal
force .......................................................
kg
force .......................................................
t 7,6/3,1 t
6597/51
9,9/5,27,6/3,1
t 7,6/3,1
72
9,9/5,2 9,9/5,2
Basic weight ............................................................. kg 64 71
Vario system Vario system
Vario system
Dimensions
ASPHALT MANAGER .............................................
ASPHALT ASPHALT
MANAGER MANAGER front
.............................................
............................................. front front
front front front
Frequency ................................................................
Frequency Frequency
................................................................ Hz
................................................................
Hz 46 Hz 46 46 46 46 46
Working width ..........................................................
Amplitude directed ...................................................
Amplitude Amplitude autom./variable
directed ...................................................
mm
directed ...................................................
350autom./variable
autom./variable
autom./variable
400 autom./variable
autom./variable
Amplitude .................................................................
Amplitude Amplitude
.................................................................
.................................................................
mm 0- 0,89 mm 0- 0,92
mm0- 0,89 0- 0,89 0- 0,92 0- 0,92
Driving Characteristics
Centifugal force ........................................................
Centifugal Centifugal kN 142
force ........................................................
force ........................................................
kN kN 142152 142 152 152
Working speed,
Centifugal force max.
Centifugal ...............................................
........................................................
Centifugal
force ........................................................ m/min
force ........................................................
t 14,5 t t 25 15,5 14,5
14,5 25 15,5
15,5
Max. gradeabilityCapacities
Capacities
(dep.Capacities
on soil con.) ........................ % 30 30
Fuel ..........................................................................
Fuel ..........................................................................
Fuel ..........................................................................
l 125,0 l l 125,0
145,0 125,0 145,0 145,0
Drive
Water .......................................................................
Water .......................................................................
Water .......................................................................
l 600,0 l l 750,0 600,0
600,0 750,0 750,0
Engine manufacturer
Technical modifications reserved. Machines
Technical
may be ................................................
modifications
shown
Technical
with reserved.
options.
modifications
Machines
reserved.
mayMachines
be shownmay
withbe
options.
shown with options. Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
91
TANDEM ROLLERS Standard Equipment
ASPHALT MANAGER 2
Opti
RO
BOMAG
Hellerwald
D-56154 Boppard
P.O. Box 5162
Tel. (0)6742 - 1000
Fax (0)6742 - 3090
Dimensions in mm
Dimensions in mm
A A B B CC DD H
H
H2 K K L
H2
LO O
S1
S1 W S2
S2
W
BW 191 AD-5 AM
BW 191 3900
AD-5 21782178 760760
AM 3900 1400
1400 2364 3098
2364 3098250 2505300 5300
89 89
22 1922 19
2000 2000
BW 206 AD-5 AM
BW 206 3900
AD-5 23132313 760760
AM 3900 1400
1400 2364 3098
2364 3098250 2505300 5300
89 89
22 1922 19
2135 2135
92
TECHNICAL
Technical Data
DATA
Technical Data
Technical Data BOMAG BOMAG
BOMAG BOMAG BOMAG BOMAG
BW 191 AD-5 AM BW
BW191
206
AD-5
AD-5
BWAM191
AM AD-5
BW 206
AM AD-5
BW AM
206 AD-5 AM
Weights Weights Weights
Operating weight CECE w. Operating
ROPS-cabin weight Operating
.................
CECE w.weight ROPS-cabin
kgCECE w. .................
ROPS-cabin
13.900 kg
................. kg
14.500
13.900 13.900 14.500 14.500
Grossweight .............................................................
Grossweight ............................................................. kg
Grossweight .............................................................
kg 15.000 kg
16.000
15.000 15.000 16.000 16.000
Axle load, front CECE ..............................................
Axle load, front Axle CECE load,
..............................................
front kg CECE ..............................................
7.050 kg kg
7.350
7.050 7.050 7.350 7.350
Axle load, rear CECE ...............................................
Axle load, rear CECE Axle load, ...............................................
rear CECE
kg ...............................................
6.850 kg kg
7.150
6.850 6.850 7.150 7.150
Static linear load, front CECE Static..................................
linear load, Static
frontlinear
CECE load,
..................................
kg/cm
front CECE 35,3 kg/cm
.................................. kg/cm
34,4
35,3 35,3 34,4 34,4
Static linear load, rear CECE Static ...................................
linear load, Static
rearlinear
CECE load,
...................................
kg/cm
rear CECE34,3 kg/cm
................................... kg/cm
33,5
34,3 34,3 33,5 33,5
Dimensions DimensionsDimensions
Track radius, inner ...................................................
Track radius, inner Track ...................................................
radius, inner mm...................................................
5.190 mm 5.190
mm
5.117 5.190 5.117 5.117
Length (without towing hitch)Length ...................................
(withoutLengthtowing (without
hitch) ...................................
mm
towing hitch)5.300 ...................................
mm 5.300
mm
5.300 5.300 5.300 5.300
3
Asphalt
Driving Characteristics
Driving Characteristics
Driving Characteristics
0,136 Max. travel speed .....................................................
Max. travel speed Max. .....................................................
travel speed km/h.....................................................
0- 12,0 km/h 0- 12,0
0-
km/h
12,0 0- 12,0 0- 12,0 0- 12,0
Max. gradeability without/with
Max. vibr.
gradeability
..........................
Max.without/with
gradeability vibr.
% without/with
..........................
35/30
vibr. ..........................
% 35/30
%
35/30 35/30 35/30 35/30
0,167
Drive Drive Drive
Engine manufacturer ................................................
Engine manufacturer Engine................................................
manufacturer ................................................
Deutz Deutz
Deutz Deutz Deutz Deutz
Type .........................................................................
Type .........................................................................
Type .........................................................................
TCD 4.1 L04 TCDTCD L04L04TCD 4.1 L04TCD 4.1 L04 TCD 4.1 L04
4.14.1
Emission stage .........................................................
Emission stageEmission .........................................................
stage .........................................................
Stage IV / TIER4f Stage
Stage Stage IV / TIER4f
IV /IVTIER4f
/ TIER4f Stage IV / TIER4f
Stage IV / TIER4f
Exhaust gas aftertreatment Exhaust
......................................
gas aftertreatment
Exhaust gas......................................
aftertreatment DPF+SCR ...................................... DPF+SCR DPF+SCR DPF+SCR
DPF+SCR DPF+SCR
Cooling .....................................................................
Cooling .....................................................................
Cooling .....................................................................
Liquid Liquid
Liquid Liquid Liquid Liquid
ng bow, Number of cylinders .................................................
Number of cylinders Number .................................................
of cylinders .................................................
4 4 4 4 4 4
Performance ISO 14396 ..........................................
Performance ISO Performance
14396 ..........................................
ISOkW14396 ..........................................
105,0 kW 105,0
kW
105,0 105,0 105,0 105,0
dle Performance SAE J 1995Performance ........................................
SAEPerformance
J 1995 ........................................
SAEhp J 1995 ........................................
141,0 hp 141,0
hp
141,0 141,0 141,0 141,0
Dimensions in mm
Speed .......................................................................
Speed .......................................................................
Speed .......................................................................
min-1 2.300 min-1 2.300
min-1
2.300 2.300 2.300 2.300
e plate
w oil Brakes H
Brakes H1 H2
Brakes L L1 W
Service brake ...........................................................
Service brake ...........................................................
Service brake ...........................................................
hydrost. hydrost.
hydrost. hydrost. hydrost. hydrost.
BP 10/35
Parking 658brake962 Parking 700
brake ...........................................................
Parking 1084 532multi350
...........................................................
brake ...........................................................
disc multi
multi
disc
disc multi disc multi disc multi disc
BP 12/40
Steering 658 962
Steering 700
Steering 1084 542 400
Steering system .......................................................
Steering systemSteering .......................................................
system .......................................................
oscil.artic. oscil.artic.
oscil.artic. oscil.artic. oscil.artic. oscil.artic.
Exciter system Exciter system
Exciter system
Technical Data Vibrating drum Vibrating
Vibrating drum ..........................................................
..........................................................
drum ..........................................................
front + rear front
front
BOMAG
+ rear
+ rear front + rear front + rear
BOMAG front + rear
Autom. vibr. shut off .................................................
Autom. vibr. shut Autom.
off .................................................
vibr. shut off .................................................
standard standard
standard standard standard standard
Frequency ................................................................
Frequency ................................................................ Hz
Frequency ................................................................
Hz 46/45 BP Hz10/35 46/45
46/45
46/45 BP
46/4512/40 46/45
Amplitude .................................................................
Amplitude .................................................................
Amplitude ................................................................. mm 0,94/0,44 mm 0,92/0,42 0,94/0,44
mm
0,94/0,44 0,92/0,42 0,92/0,42
Centrifugal force .......................................................
Centrifugal force Centrifugal
.......................................................
forcekN kN
.......................................................
163/75 kN
163/75
163/75 163/75 163/75 163/75
Weights
Centrifugal force .......................................................
Centrifugal force Centrifugal
....................................................... t
forcet .......................................................
16,6/7,6 t16,6/7,6
16,6/7,6 16,6/7,6 16,6/7,6 16,6/7,6
Operating weight CECE ........................................... kg 65 72
Vario system
Basic Vario system Vario system
weight ............................................................. kg 64 71
ASPHALT MANAGER .............................................
ASPHALT MANAGER ASPHALT .............................................
MANAGER .............................................
front front
front front front front
Frequency ................................................................
Dimensions Frequency ................................................................
Frequency ................................................................
Hz 46 Hz 46 Hz
46 46 46 46
Amplitude directed ...................................................
Amplitude directed Amplitude
...................................................
directed ...................................................
autom./variable autom./variable
autom./variableautom./variable
autom./variableautom./variable
Working width ..........................................................
Amplitude .................................................................
Amplitude .................................................................
mm 0- 0,87 mm
Amplitude .................................................................
mm 3500-
0- 0,87
mm 0,85 0- 0,87 400
0- 0,85 0- 0,85
Centifugal force ........................................................
Centifugal forceCentifugal........................................................
forcekN ........................................................
120 kN 120
120kN 120 120 120
Driving Characteristics
Centifugal force ........................................................
Centifugal forceCentifugal........................................................
forcet ........................................................
12,2 t t12,2
12,2 12,2 12,2 12,2
Working
Capacities
speed, max. ............................................... m/min 25
Capacities Capacities
25
Max. gradeabilityFuel (dep. on Fuel soil..........................................................................
con.) ........................
Fuel ..........................................................................
..........................................................................
l 165,0 %
l 30
165,0
l165,0 165,0 30
165,0 165,0
Water .......................................................................
Water .......................................................................
Water .......................................................................
l 970,0 l 970,0
l970,0 970,0 970,0 970,0
Drive
Technical modifications reserved. Machines
Technical
may bemodifications
shown with options.
reserved.
TechnicalMachines
modifications
mayreserved.
be shownMachines
with options.
may be shown with options.
93
TANDEM ROLLERS Standard Equipment
Front drum vibration: 2 amplitudes / 2
Opti
RO
BCM-Documentation system
Dimensions in mm
Dimensions
A inBmm C D H H2 K L O S1 S2 W
A B C D H H2 K L O S1 S2 W
BW 161 ADO-5 3620 1836 670 1220 2315 3050 250 4840 78 17 20 1680
BW 161 ADO-5 3620
BW 190 ADO-5 3620 2146 1836
670 670 1220
1220 2315
2315 3050
3050 250
250 48404840
78
7817 20
19 1680
20 1990
BW 190 ADO-5 3620 2146 670 1220 2315 3050 250 4840 78 19 20 1990
BW 202 ADO-5 3620
BW 202 ADO-5 2291 2291
3620 670 670 1220
1220 2315
2315 3050 250
3050 250 48404840
78 7819 19
20 20
2135 2135
94
TECHNICAL DATA
Technical DataTechnical
Technical
Data
Technical
BOMAG
Data Data BOMAG
BOMAGBOMAGBOMAG
BOMAGBOMAGBOMAGBOMAG BOMAG BOMAGBOMAG
BW 161 ADO-5 BW 190
BWADO-5
161
BWADO-5
161
BWADO-5
BW
161 202
ADO-5
BWADO-5
190
BWADO-5
190
BWADO-5
190 ADO-5
BW 202
BWADO-5
202
BWADO-5
202 ADO-5
Weights Weights
Weights
Weights
Operating weight CECE w. cab. ........ OperatingkgweightOperating
Operating CECE
weight
9.900 w.CECE
weight
cab. ........
w.CECE
cab. ........ kg ........
w. cab. kg 9.900
11.800 kg 9.900 9.90011.950 11.800 11.800 11.800 11.950 11.950 11.950
Axle load, front CECE .......................Axle load, kgfront
Axle load,
CECE
Axle
frontload,
.......................
5.100 CECE kg 6.200
front.......................
CECE ....................... kg 5.100kg 5.100 5.1006.350 6.200 6.200 6.200 6.350 6.350 6.350
Axle load, rear CECE ........................ kgrear
Axle load,
Axle load,
CECE
Axle
rear load,
........................
4.800CECE kg 5.600
rear........................
CECE ........................ kg 4.800kg 4.800 4.8005.600 5.600 5.600 5.600 5.600 5.600 5.600
Static linear load, front CECE ...........Static linear kg/cm
Static
load,
linear
Static
front
load,
30,4linear
CECE front
load,
...........
CECE front...........
CECE kg/cm 31,0kg/cm
........... 30,4kg/cm
30,4 30,4 29,7 31,0 31,0 31,0 29,7 29,7 29,7
Static linear load, rear CECE ............Static linear kg/cm
Static
load,
linear
Static
rearload,
CECE
28,6linear
rearload,
............
CECE CECEkg/cm
rear............ 28,1kg/cm
............ 28,6kg/cm
28,6 28,6 26,2 28,1 28,1 28,1 26,2 26,2 26,2
kg ......................................
Grossweight ......................................Grossweight
GrossweightGrossweight
......................................kg 13.000
10.900 ...................................... kg 10.900
kg 10.900 10.900
13.300 13.000 13.000 13.000 13.300 13.300 13.300
Dimensions Dimensions
Dimensions
Dimensions
Track radius, inner ............................Track radius,
Track
mm inner
radius,
Track
............................
4.900
inner
radius,............................
inner ............................
mm 4.745 mm 4.900
mm 4.900 4.9004.673 4.745 4.745 4.745 4.673 4.673 4.673
Driving Characteristics Driving
Driving
Characteristics
Driving
Characteristics
Characteristics
3
Asphalt
Max. travel speed ..............................
Max. travel
Max.
km/h
speed
travel
Max.
..............................
speed
0-travel
12,0 ..............................
speed ..............................
km/h0- 15,0
km/h0- 12,0
km/h
0- 12,0 0- 12,0
0- 12,0 0- 15,0 0- 15,0 0- 15,0 0- 12,0 0- 12,0 0- 12,0
0,136 Max. gradeability without/with vibr. ...Max. gradeability
Max.
% gradeability
Max.
without/with
35/30
gradeability
without/with
vibr.without/with
... vibr. ...%vibr.35/30 ...% 35/30
% 35/30 35/3035/30 35/30 35/30 35/30 35/30 35/30 35/30
Drive Drive Drive Drive
0,167 Engine manufacturer .........................Engine manufacturer
Engine manufacturer
Engine
.........................
Deutzmanufacturer
......................... Deutz Deutz
......................... Deutz DeutzDeutz Deutz Deutz Deutz Deutz Deutz Deutz
Type ..................................................
Type ..................................................
Type ..................................................
TypeTCD TCD 3.6
..................................................
3.6 L4 TCDL4 3.6TCD L4 TCD
L4 3.6 TCD 3.6 L43.6
TCD L4 3.6 TCD
L4 3.6TCD L4 3.6 L4 TCD 3.6TCD L4 3.6 TCD
L4 3.6 L4
Emission stage .................................. EmissionEmission
stage ..................................
Emission
stageStage..................................
stage Stage IV
..................................
IV / TIER4f Stage IVStage
/ TIER4f IVStage
/ TIER4f Stage
/ TIER4f IV / TIER4f
IV / TIER4f
Stage IVStage IVStage
/ TIER4f IV / TIER4f
/ TIER4f Stage IVStage
/ TIER4f
IVStage
/ TIER4f
IV / TIER4f
Exhaust gas aftertreatment ............... ExhaustExhaust
gas aftertreatment
Exhaust
gas DOC+SCR
aftertreatment
gas ...............
aftertreatment DOC+SCR
.............................. DOC+SCR DOC+SCR DOC+SCR
DOC+SCR DOC+SCR DOC+SCR DOC+SCR DOC+SCR DOC+SCR DOC+SCR
Cooling ..............................................
Cooling Cooling
..............................................
..............................................
CoolingLiquid Liquid Liquid Liquid LiquidLiquid Liquid Liquid Liquid
.............................................. Liquid Liquid Liquid
Number of cylinders ..........................Number Number of cylinders Number
of cylinders
..........................
4 of cylinders
.......................... 4
.......................... 4 4 4 4 4 4 4 4 4 4
ng bow, Performance ISO 14396 ...................Performance kW ISOPerformance
Performance 14396 ISO...................
95,0 14396 ISO................... kW 95,0
14396 ................... kW 95,0kW 95,0 95,0 95,0 95,0 95,0 95,0 95,0 95,0 95,0
Performance SAE J 1995 .................. hp SAE
Performance
Performance Performance
J 1995
SAE..................
127,0 J 1995SAE.................. hp 127,0
J 1995 .................. hp 127,0 hp 127,0 127,0127,0 127,0 127,0 127,0 127,0 127,0 127,0
dle Speed ................................................ min-1 ................................................
Speed ................................................
Speed Speed min-12.300
................................................
2.300 min-1
2.300 2.300 2.3002.300 2.300 2.300 2.300
min-1 2.300 2.300 2.300
Dimensions in mm
Electric equipment ............................. V
Electric equipment
Electric equipment
Electric
.............................
12 equipment
............................. V 12 V 12 V 12
............................. 12 12 12 12 12 12 12 12
e plate
w oil Brakes H H1 Brakes
Brakes H2 Brakes
L L1 W
Service brake ....................................Service brake
Service
....................................
brake
Service
hydrost.
....................................
brake ....................................
hydrost.hydrost. hydrost. hydrost.
hydrost.hydrost. hydrost. hydrost. hydrost. hydrost. hydrost.
BP 10/35
Parking 658 Parking
brake .................................... 962 Parking
700....................................
brake 1084
brake
Parkingmulti 532....................................
350
....................................
brake
disc multi disc
multi disc
multi discmulti multi
disc disc
multi disc
multi discmulti disc multi disc
multi discmulti disc
BP 12/40
Steering 658 Steering
962 Steering
700 Steering
1084 542 400
Steering system ................................SteeringSteering
system Steering
................................
systemoscil.artic.
................................
system ................................
oscil.artic.
oscil.artic.
oscil.artic.
oscil.artic.
oscil.artic.
oscil.artic.
oscil.artic.
oscil.artic. oscil.artic.
oscil.artic.
oscil.artic.
Exciter system ExciterExciter
system
Exciter
systemsystem
Technical Data
Vibrating drum ...................................
VibratingVibrating front
drum ...................................
Vibrating
drum ................................... front front
drum ...................................
BOMAG front front front front
BOMAG front front front front front
Autom. vibr. shut off ..........................Autom. vibr.
Autom.
shutvibr.
Autom.standard
off ..........................
shut vibr.
off .......................... standard
shut off .......................... standard
standardstandardstandard standardstandardstandard standardstandardstandard
Frequency .........................................
Frequency Hz.........................................
Frequency Hz 40/55
40/53 .........................................
Frequency
......................................... HzBP 10/35
Hz
40/53 40/53 40/5340/55 BP 40/5512/40
40/55 40/55 40/55 40/55 40/55
Amplitude ..........................................
Amplitudemm
Amplitude 0,87/0,44
..........................................
Amplitude
..........................................mm 0,90/0,34
.......................................... 0,84/0,31
mm 0,87/0,440,87/0,44
mm 0,87/0,44 0,90/0,340,90/0,34 0,84/0,31
0,90/0,34 0,84/0,310,84/0,31
Centrifugal force ................................ kNforce Centrifugal
Centrifugal
Centrifugal 95/90
................................
force kN 126/88
................................
force ................................ kN 95/90kN 95/90 95/90126/88 126/88 126/88 126/88 126/88 126/88 126/88
Weights
Centrifugal force ................................ t force Centrifugal
Centrifugal
Centrifugal 9,7/9,2
................................
force t
................................ 12,8/9,0
force ................................ t t
9,7/9,2 12,8/9,012,8/9,012,8/9,0 12,8/9,0
9,7/9,2 9,7/9,2 12,8/9,012,8/9,0 12,8/9,0
Operating weight CECE ...........................................
Oscillating drum ................................Oscillating
Oscillating
drum Oscillatingrear ................................
................................
drum
kg rear 65
drum ................................ rear rear rear rear rear
72 rear rear rear rear rear
Basic weight
O. Frequency .............................................................
.................................... HzFrequency
O. Frequency
O. 40
....................................
O. Frequency
....................................kg
Hz 40 Hz 64
.................................... 40 Hz 40 40 40 71 40
40 40 40 40 40
mm
O. Amplitude .....................................O. Amplitude
O. Amplitude 1,03
.....................................
O. Amplitude
.....................................mm 1,01 mm 1,03mm 1,03
..................................... 1,03 1,02 1,01 1,01 1,01 1,02 1,02 1,02
Dimensions
Capacities CapacitiesCapacities Capacities
Working width ..........................................................
Fuel ...................................................
Fuel ...................................................
Fuel
l ...................................................
Fuel 145,0 mm l 350
...................................................
l 145,0 145,0
l 145,0 400
145,0145,0 145,0 145,0 145,0 145,0 145,0 145,0
Water .................................................
Water .................................................
Water
l .................................................
Water 750,0
.................................................
l 750,0
l 750,0
l 750,0 750,0750,0 750,0 750,0 750,0 750,0 750,0 750,0
Driving CharacteristicsTechnical
Technical modifications reserved. Machines may be shown with options.
modifications
Technical modifications
reserved.
Technical
Machines
modifications
reserved.
may Machines
bereserved.
shown
may
with
Machines
beoptions.
shownmaywithbe
options.
shown with options.
95
TANDEM ROLLERS Standard Equipment
Front drum vibration: 2 amplitudes / 2
Opti
RO
Dimensions in mm
Dimensions
A in mm
B C D H H2 K L O S1 S2 W
A B C D H H2 K L O S1 S2 W
BW 191 ADO-5 3900 2178 760 1400 2364 3093 250 5300 89 19 20 2000
BW 191 ADO-5
BW 206 ADO-5 3900 3900
2313 2178760 760 1400
1400 2364
2364 3093
3093 250
250 5300
530089 89 19 1920 2000
20 2135
BW 206 ADO-5 3900 2313 760 1400 2364 3093 250 5300 89 19 20 2135
96
TECHNICAL
Technical Data DATA
Technical
Technical
Data Data BOMAG BOMAG
BOMAG
BOMAG BOMAG BOMAG
BW 191 ADO-5 BWBW
191206
BW
ADO-5
ADO-5
191 ADO-5BW 206BW
ADO-5
206 ADO-5
Weights Weights
Weights
Operating weight CECE Operating
w. cab. ..............................
Operating
weight CECE weight cab.kg
w.CECE ..............................
w. cab. ..............................
13.300 kg kg 13.300 13.300
13.700 13.700 13.700
Axle load, front CECE ..............................................
Axle load,Axle frontload,
CECE front CECE kg
..............................................
..............................................
6.650 kg kg 6.650
6.9506.650 6.950 6.950
Axle load, rear CECE ...............................................
Axle load,Axle rearload,
CECE rear kg
...............................................
CECE ...............................................
6.750 kg kg 6.750
6.7506.750 6.750 6.750
Static linear load, front CECEStatic..................................
linear
Static
load,linear
frontload,
CECE front kg/cm
.................................. kg/cm
CECE ..................................
33,3 kg/cm
33,332,6 33,3 32,6 32,6
Static linear load, rear CECE Static...................................
linear
Static
load,linear
rearload,
CECE rear kg/cm
................................... kg/cm
CECE ...................................
33,8 kg/cm
33,831,6 33,8 31,6 31,6
Grossweight .............................................................
Grossweight Grossweight kg
.............................................................
.............................................................
14.600 kg kg 14.600 14.600
16.000 16.000 16.000
Dimensions Dimensions
Dimensions
Track radius, inner ...................................................
Track radius, Trackinnerradius,
...................................................
inner ...................................................
mm 5.190 mm mm5.190
5.1175.190 5.117 5.117
Driving Characteristics
DrivingDriving
Characteristics
Characteristics
3
Asphalt
Max. travel speed .....................................................
Max. travel Max.speedtravel.....................................................
speed .....................................................
km/h 0- 12,0 km/h km/h
0- 12,0
0- 12,0
0- 12,0 0- 12,0 0- 12,0
0,136 Drive Drive Drive
Deutz
DeutzDeutz Deutz Deutz
0,167 Engine manufacturer ................................................
Engine manufacturer
Engine manufacturer................................................
Type .........................................................................
................................................
Deutz
Type .........................................................................
Type .........................................................................
TCD 4.1 L04 TCD 4.1 4.1
TCD L04
TCD 4.1 L04
L04 TCD 4.1 L04
TCD 4.1 L04
Emission stage .........................................................
EmissionEmissionstage .........................................................
stage .........................................................
Stage IV / TIER4f Stage IV Stage
Stage / IV
TIER4f
IV / TIER4f
/ TIER4f Stage IV Stage
/ TIER4f
IV / TIER4f
Exhaust gas aftertreatment Exhaust
......................................
gas
Exhaustaftertreatment
gas aftertreatment
......................................
......................................
DPF+SCR DPF+SCR DPF+SCR
DPF+SCR DPF+SCR DPF+SCR
Cooling .....................................................................
Cooling .....................................................................
Cooling .....................................................................
Liquid Liquid
LiquidLiquid Liquid Liquid
Number of cylinders .................................................
Number of Number
cylinders of cylinders
.................................................
.................................................
4 4 4 4 4 4
Performance ISO 14396 Performance ..........................................
Performance
ISO 14396 ISO ..........................................
14396 kW..........................................
105,0 kW kW 105,0
105,0105,0 105,0 105,0
ng bow, Performance SAE J 1995Performance ........................................
Performance
SAE J 1995 SAE........................................
J 1995hp ........................................
141,0 hp hp 141,0
141,0141,0 141,0 141,0
Speed ....................................................................... min-1
Speed .......................................................................
Speed .......................................................................
2.300 min-1 2.300
min-1 2.3002.300 2.300 2.300
dle Electric equipment ...................................................
Electric equipment
Electric equipment V
...................................................
...................................................
12 V V 12 12 12 12 12
Dimensions in mm
e plate Brakes BrakesBrakes
w oil H brake H1
Service H2
Service brake ...........................................................
Service L L1 hydrost. W
...........................................................
brake ........................................................... hydrost.
hydrost.
hydrost. hydrost. hydrost.
Parking brake ...........................................................
Parking brake Parking ...........................................................
brake ...........................................................
multi disc multi
multi
discdisc
multi disc multi discmulti disc
BP 10/35 658 962 700 1084 532 350
Steering Steering
Steering
BP 12/40
Steering 658system 962.......................................................
700.......................................................
system .......................................................
Steering Steering system 1084 542oscil.artic. 400 oscil.artic.
oscil.artic.
oscil.artic. oscil.artic.oscil.artic.
Exciter system ExciterExciter
systemsystem
Vibrating drum ..........................................................
Vibrating Vibrating front + rear
drum ..........................................................
drum .......................................................... frontfront
+ rear
+front
rear+ rear front + rear
front + rear
Technical
Autom. vibr. shutData
off .................................................
Autom. vibr. Autom.
shutvibr. standard
off .................................................
shut off ................................................. standard
standardstandard standard standard
Frequency ................................................................
Frequency Frequency Hz 40/50
................................................................ Hz
................................................................ HzBOMAG
40/5040/5040/50 BOMAG
40/50 40/50
Amplitude .................................................................
AmplitudeAmplitude mm 0,94/0,44 mm
.................................................................
................................................................. mm 0,94/0,44
BP 10/35 0,94/0,44
0,94/0,44 0,94/0,44
BP 12/40 0,94/0,44
Centrifugal force .......................................................
Centrifugal Centrifugal kN 129/95
force ....................................................... kN
force ....................................................... kN 129/95
129/95 129/95 129/95 129/95
Centrifugal force .......................................................
Centrifugal Centrifugal t 13,1/9,7
force ....................................................... t
force ....................................................... t 13,1/9,7 13,1/9,7
13,1/9,7 13,1/9,7 13,1/9,7
Weights
Oscillating drum .......................................................
Oscillating Oscillating rear
drum .......................................................
drum ....................................................... rearrear rear rear rear
Operating weight CECE ...........................................
O. Frequency ...........................................................
O. Frequency O. Frequency Hz 40
........................................................... kg
Hz
........................................................... 65
Hz 40 40 40 72 40
40
Basic weight
O. Amplitude .............................................................
............................................................
O. Amplitude O. Amplitude mm 1,04
............................................................ kg
mm
............................................................ mm64
1,041,03 1,04 71
1,03 1,03
Capacities
Dimensions Capacities Capacities
Fuel ..........................................................................
Fuel ..........................................................................
Fuel ..........................................................................
l 165,0 l l 165,0
165,0165,0 165,0 165,0
Working width ..........................................................
Water .......................................................................
Water .......................................................................
Water ....................................................................... l 970,0 lmm l 350
970,0
970,0970,0 400 970,0
970,0
Technical modifications reserved. Machines
Technical
may be
modifications
shown
Technical
withreserved.
modifications
options. Machines
reserved.
mayMachines
be shownmay
with be
options.
shown with options.
Driving Characteristics
Working speed, max. ............................................... m/min 25 25
Max. gradeability (dep. on soil con.) ........................ % 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
97
TANDEM ROLLERS Standard Equipment
2 amplitudes / 2 frequencies
Opti
RO
BOMAG
Hellerwald
D-56154 Boppard
P.O. Box 5162
Tel. (0)6742 - 1000
Fax (0)6742 - 3090
Dimensions in mm
Dimensions inAmm B C D H H2 K L O S W
A B C D H H2 K L O S W
BW 141 AD-50 3300 1664 730 1100 2240 3000 250 4400 82 16 1500
BW151
BW 141AD-50
AD-50 3300
3300 1664
1844 730730 1100110022402200
3000 3000
250 4400
250 82
4400 16
82 1500
16 1680
BW 151 AD-50 3300 1844 730 1100 2200 3000 250 4400 82 16 1680
98
BOMAG
Hellerwald
D-56154 Boppard
TECHNICAL
Technical Data DATA
Technical Data
Technical Data BOMAG BOMAG
BOMAG BOMAG BOMAG BOMAG
BW 141 AD-50 BW
BW 151
141 AD-50
BW 141 AD-50
AD-50 BW 151 AD-50
BW 151 AD-50
Weights Weights Weights
Operating weight CECE w. Operating
cab. ..............................
weight Operating
CECE w. weight
cab. kg..............................
CECE w. cab. 6.900 kg
.............................. kg
7.600
6.900 6.900 7.600 7.600
Axle load, front CECE ..............................................
Axle load, frontAxle CECE load,..............................................
front CECE
kg ..............................................
3.560 kg kg
3.900
3.560 3.560 3.900 3.900
Axle load, rear CECE ...............................................
Axle load, rear Axle CECE load,
...............................................
rear CECEkg ...............................................
3.340 kg kg
3.700
3.340 3.340 3.700 3.700
Static linear load, front CECE Static..................................
linear load, Static
frontlinear
CECE load,..................................
front CECE23,7
kg/cm kg/cm
.................................. kg/cm
23,2
23,7 23,7 23,2 23,2
Static linear load, rear CECE Static...................................
linear load, Static
rearlinear
CECE load,
...................................
rear CECE22,3
kg/cm kg/cm
................................... kg/cm
22,0
22,3 22,3 22,0 22,0
Grossweight .............................................................
Grossweight .............................................................
Grossweight .............................................................
kg 8.700 kg kg
9.300
8.700 8.700 9.300 9.300
Dimensions DimensionsDimensions
Track radius, inner ...................................................
Track radius, inner Track...................................................
radius, innermm...................................................
4.480 mm 4.480
mm
4.390 4.480 4.390 4.390
Driving Characteristics
Driving Characteristics
Driving Characteristics
3
Asphalt
Max. travel speed .....................................................
Max. travel speed Max. .....................................................
travel speed km/h.....................................................
0- 11,0 km/h 0- 0-
11,0
km/h
11,0 0- 11,0 0- 11,0 0- 11,0
0,136 Max. gradeability without/with
Max.vibr.gradeability
..........................
Max.without/with
gradeabilityvibr.
%without/with
..........................
40/30
vibr. ..........................
% 40/30
%40/30 40/30 40/30 40/30
Drive Drive Drive
0,167 Engine manufacturer ................................................
Engine manufacturer Engine................................................
manufacturer ................................................
Kubota Kubota
Kubota Kubota Kubota Kubota
Type .........................................................................
Type .........................................................................
Type .........................................................................
V 3307 DI-T V 3307
V 3307 DI-TDI-TV 3307 DI-T V 3307 DI-T V 3307 DI-T
Emission stage .........................................................
Emission stageEmission .........................................................
stage .........................................................
Stage IIIa / TIER4i Stage
Stage IIIaIIIa / TIER4i
Stage IIIa / TIER4i
/ TIER4i Stage IIIa / TIER4i
Stage IIIa / TIER4i
Cooling .....................................................................
Cooling .....................................................................
Cooling .....................................................................
Liquid Liquid
Liquid Liquid Liquid Liquid
Number of cylinders .................................................
Number of cylinders Number .................................................
of cylinders .................................................
4 4 4 4 4 4
Performance ISO 14396 ..........................................
Performance ISO Performance
14396 ..........................................
ISO kW
kW14396 ..........................................
55,4 55,4
kW
55,4 55,4 55,4 55,4
ng bow, Performance SAE J 1995Performance ........................................
SAE
Performance
J 1995 ........................................
SAE hp
hp J 1995 ........................................
74,3 74,3
hp
74,3 74,3 74,3 74,3
Speed .......................................................................
Speed .......................................................................
Speed .......................................................................
min-1 2.200 min-1 2.200
min-1
2.200 2.200 2.200 2.200
dle Electric equipment ...................................................
Electric equipment Electric...................................................
equipment V
V ...................................................
12 12V12 12 12 12
Dimensions in mm
e plate Brakes Brakes Brakes
w oil H brakeH1 Service H2
Service brake ...........................................................
Service L L1 hydrost. W
...........................................................
brake ...........................................................
hydrost.
hydrost. hydrost. hydrost. hydrost.
Parking brake ...........................................................
Parking brake ...........................................................
Parking brake ...........................................................
multi disc multi
multi
disc
disc multi disc multi disc multi disc
BP 10/35 658 962 700 1084 532 350
Steering Steering Steering
BP 12/40
Steering 658 system 962 700
system .......................................................
Steering Steering 1084 542oscil.artic.
400
.......................................................
system ....................................................... oscil.artic.
oscil.artic. oscil.artic. oscil.artic. oscil.artic.
Exciter system Exciter system
Exciter system
Vibrating drum ..........................................................
Vibrating drumVibrating ..........................................................
drum ..........................................................
front + rear front
front + rear front + rear front + rear
+ rear front + rear
Technical
Autom. vibr. shutData
off .................................................
Autom. vibr. shut Autom.
off .................................................
vibr. shut off .................................................
standard standard
standard
BOMAG
standard standard
BOMAG
standard
Frequency ................................................................
Frequency ................................................................ Hz
Frequency ................................................................
Hz 45/55 Hz
45/55
45/55 45/55 45/55 45/55
Amplitude .................................................................
Amplitude .................................................................
Amplitude .................................................................
mm 0,71/0,28 mm BP mm10/35 0,71/0,28 BP
0,71/0,27
0,71/0,28 12/40 0,71/0,27
0,71/0,27
Centrifugal force .......................................................
Centrifugal force Centrifugal
.......................................................
forcekN .......................................................
75/45 kN kN
75/45
75/45 75/45 75/45 75/45
Centrifugal force .......................................................
Centrifugal force Centrifugal
....................................................... t
forcet .......................................................
7,6/4,6 t7,6/4,6
7,6/4,6 7,6/4,6 7,6/4,6 7,6/4,6
Weights
Capacities weightCapacities
Operating Capacities
CECE ........................................... kg 65 72
Fuel ..........................................................................
Fuel ..........................................................................
Fuel ..........................................................................
l 125,0 l 125,0
l125,0 125,0 125,0 125,0
Basic weight .............................................................
Water .......................................................................
Water .......................................................................
l 600,0
kg
Water .......................................................................
l
64 l600,0
600,0 600,0
71
600,0 600,0
Dimensions
Technical modifications reserved. Machines
Technical
may bemodifications
shown with Technical
options.
reserved. modifications
Machines mayreserved.
be shownMachines
with options.
may be shown with options.
99
TANDEM ROLLERS Standard Equipment
2 amplitudes / 2 frequencies
Opti
RO
BOMAG
Hellerwald
D-56154 Boppard
P.O. Box 5162
Tel. (0)6742 - 1000
Fax (0)6742 - 3090
Dimensions in mm
Dimensions in
A mm B C D H H2 K L O S W
A
BW 151 AD-50 H 3300
B
1844
C730 D 1100 H 2200H2 3000K 250
L 4400
O S
82
W
16 1680
BWBW 151
151 AD-50SH
AD-50 H 3300
3300 1844
1844 730
730 1100
1100 2200
220030003000
250 2504400 4400
82 16
82 1680
16 1680
BW 151 AD-50 SH 3300 1844 730 1100 2200 3000 250 4400 82 16 1680
100
TECHNICAL
Technical Data
DATA
Technical Data
Technical Data BOMAG BOMAG
BOMAG BOMAG BOMAG BOMAG
BW 151 AD-50 H BW 151
BW AD-50
151 BW H
AD-50
151
SHAD-50
BW 151 BW SH
H AD-50 151 AD-50 SH
Weights Weights Weights
Operating weight CECE w. Operating
cab. ..............................
weight Operating
CECE w. cab.kg
weight ..............................
CECE w. cab. 8.420 kg
.............................. kg
9.020
8.420 8.420 9.020 9.020
Axle load, front CECE ..............................................
Axle load, frontAxle CECE load, kg
..............................................
front CECE kg
..............................................
4.310 kg
4.610
4.310 4.310 4.610 4.610
Axle load, rear CECE ...............................................
Axle load, rear Axle CECE load, kg
...............................................
rear CECE ...............................................
4.110 kg kg
4.410
4.110 4.110 4.410 4.410
Static linear load, front CECE Static..................................
linear load, Static
frontlinear
CECE load, kg/cm
..................................
front CECE25,7 kg/cm
.................................. kg/cm
27,4
25,7 25,7 27,4 27,4
Static linear load, rear CECE Static...................................
linear load, Static
rearlinear
CECE load, kg/cm
...................................
rear CECE24,5 kg/cm
................................... kg/cm
26,3
24,5 24,5 26,3 26,3
Grossweight ............................................................. kg
Grossweight .............................................................
Grossweight .............................................................
9.300 kg kg
9.300
9.300 9.300 9.300 9.300
Dimensions DimensionsDimensions
Track radius, inner ...................................................
Track radius, inner Track ...................................................
radius, inner mm...................................................
4.390 mm 4.390
mm
4.390 4.390 4.390 4.390
Drums Drums Drums
3
Asphalt
Split drum .................................................................
Split drum .................................................................
Split drum .................................................................
no no no no no no
0,136 Driving Characteristics Driving Characteristics Driving Characteristics
0,167 Max. travel speed .....................................................
Max. travel speed
Max. gradeability without/with
Max. vibr.
gradeability
Max. .....................................................
travel speed
..........................
Max.without/with
gradeability
km/h
vibr.
.....................................................
%without/with
0- 12,0
..........................
40/30
km/h
vibr. ..........................
%
0- 12,0
km/h
0- 12,0
40/30
%40/30
0- 12,0
40/30
0- 12,0
40/30
0- 12,0
40/30
Drive Drive Drive
Engine manufacturer ................................................
Engine manufacturer Engine................................................
manufacturer ................................................
Kubota Kubota
Kubota Kubota Kubota Kubota
Type .........................................................................
Type .........................................................................
Type .........................................................................
V3307 CR-T V3307
V3307 CR-TCR-TV3307 CR-T V3307 CR-T V3307 CR-T
Emission stage .........................................................
Emission stageEmission .........................................................
stage .........................................................
StageV / TIER4f StageV
StageV / TIER4fStageV / TIER4f
/ TIER4f StageV / TIER4f
StageV / TIER4f
Exhaust gas aftertreatment Exhaust
......................................
gas aftertreatment
Exhaust gas ......................................
aftertreatment ......................................
DOC+DPF DOC+DPF DOC+DPF DOC+DPF
DOC+DPF DOC+DPF
ng bow,
Cooling .....................................................................
Cooling .....................................................................
Cooling .....................................................................
Liquid Liquid
Liquid Liquid Liquid Liquid
Number of cylinders .................................................
Number of cylinders Number .................................................
of cylinders .................................................
4 4 4 4 4 4
dle Performance ISO 14396 Performance ..........................................
ISO
Performance kW
14396 ..........................................
ISO 14396 ..........................................
55,4 kW kW
55,455,4 55,4 55,4 55,4
Dimensions in mm
e plate Performance SAE J 1995Performance ........................................
SAE
Performance hpJ 1995 ........................................
J 1995 ........................................
SAE 74,3 hp hp
74,374,3 74,3 74,3 74,3
w oil H .......................................................................
H1 SpeedH2
Speed .......................................................................
Speed Lmin-1 L1 2.400 W min-1
....................................................................... 2.400
min-1
2.400 2.400 2.400 2.400
Electric equipment ...................................................
Electric equipment Electric
...................................................
equipment V ...................................................
12 V 12V12 12 12 12
BP 10/35 658 962 700 1084 532 350
Brakes Brakes Brakes
BP 12/40
Service 658brake962
Service Service700
brake ........................................................... 1084 542hydrost. 400
...........................................................
brake ...........................................................
hydrost.
hydrost. hydrost. hydrost. hydrost.
Parking brake ...........................................................
Parking brake ...........................................................
Parking brake ...........................................................
multi disc multi
multi
discdisc multi disc multi disc multi disc
Steering Steering Steering
Technical
Steering system Data
.......................................................
Steering system Steering
.......................................................
system .......................................................
oscil.artic. oscil.artic.
oscil.artic.
BOMAG
oscil.artic.
BOMAG
oscil.artic. oscil.artic.
Exciter system Exciter system
Exciter system
Vibrating drum ..........................................................
Vibrating drum Vibrating front + rear
..........................................................
drum .......................................................... BP
front 10/35
front
+ rear BP+12/40
+ rear front + rear front rear front + rear
Autom. vibr. shut off .................................................
Autom. vibr. shut Autom. standard
off .................................................
vibr. shut off ................................................. standard
standard standard standard standard
Weights
Frequency ................................................................ Hz 45/55
Frequency ................................................................ Hz
Frequency ................................................................ Hz
45/55
45/55 45/55 45/55 45/55
Operating weightAmplitude CECE.................................................................
...........................................
Amplitude ................................................................. mm 0,68/0,26 kg mm
Amplitude ................................................................. 65mm
0,68/0,26
0,68/0,26 0,68/0,26 72
0,68/0,26 0,68/0,26
Centrifugal force .......................................................
Centrifugal force Centrifugal forcekN
.......................................................
.......................................................
75/45 kN kN
75/45
75/45 75/45 75/45 75/45
Basic weight ............................................................. kg 64 71
Centrifugal force .......................................................
Centrifugal force Centrifugal forcet .......................................................
.......................................................
7,6/4,6 t t 7,6/4,6
7,6/4,6 7,6/4,6 7,6/4,6 7,6/4,6
Dimensions
Capacities Capacities Capacities
Fuel ..........................................................................
Working Fuel ..........................................................................
Fuel ..........................................................................
width .......................................................... l 125,0 l
mm 125,0
l 125,0
350 125,0 125,0
400 125,0
Water .......................................................................
Water .......................................................................
Water ....................................................................... l 600,0 l l 600,0
600,0 600,0 600,0 600,0
Driving Characteristics
Technical modifications reserved. Machines
Technical
may be
modifications
shown withTechnical
reserved.
options. Machines
modifications
mayreserved.
be shownMachines
with options.
may be shown with options.
101
TANDEM ROLLERS Standard Equipment
2 amplitudes / 2 frequencies
Opti
RO
BOMAG
Hellerwald
D-56154 Boppard
P.O. Box 5162
Tel. (0)6742 - 1000
Fax (0)6742 - 3090
Dimensions in mm
A in mm
Dimensions B C D H H2 K L O S W
BW 161 AD - 50 3620A 1836 B 670 C 1220
D 2315
H 3050 K250 L 4840O 78 S
H2 17W 1680
BW 202 AD - 50 3620 2291 670 1220 2315 3050 250 4840 78 19 2135
BW 161 AD - 50 3620 1836 670 1220 2315 3050 250 4840 78 17 1680
BW 206 AD-50 3900
BW 202 AD - 50 3620
2313
2291
760
670
1400
1220
2364
2315
3093 250
3050
250 4840
530078 89 19 192135 2135
BW 206 AD-50 3900 2313 760 1400 2364 3093 250 5300 89 19 2135
102
BOMAG
Hellerwald
D-56154 Boppard
TECHNICAL DATA
Technical Data Technical
Technical
Data
Technical
BOMAG
Data Data BOMAG
BOMAGBOMAG BOMAG
BOMAG BOMAG BOMAG BOMAG BOMAG BOMAGBOMAG
BW 161 AD - 50 BW 202
BWAD
161
BW
- 50
AD161
-BW
50AD
BW
161
- 50
206
AD
BW-AD-50
50
202
BWAD202
-BW
50AD202
- 50AD
BW- 50
206
BWAD-50
206
BW AD-50
206 AD-50
Weights Weights
Weights
Weights
Operating weight CECE w. cab. ........ OperatingkgweightOperating
Operating CECE
weight
10.000w.CECE
weight
cab. ........
w.CECE
cab. ........ kg ........
w. cab. 12.300 kg 10.000
kg 10.000 10.000
14.100 12.300 12.300 12.300 14.100 14.100 14.100
Axle load, front CECE .......................Axle load, kgfront
Axle load,
CECE
Axle
frontload,
.......................
5.100 CECE kg 6.350
front.......................
CECE ....................... kg 5.100kg 5.100 5.1006.950 6.350 6.350 6.350 6.950 6.950 6.950
Axle load, rear CECE ........................ kgrear
Axle load,
Axle load,
CECE
Axle
rear load,
........................
4.900CECE kg 5.950
rear........................
CECE ........................ kg 4.900kg 4.900 4.9007.150 5.950 5.950 5.950 7.150 7.150 7.150
Static linear load, front CECE ...........Static linear kg/cm
Static
load,
linear
Static
front
load,
30,4linear
CECE front
load,
...........
CECE front...........
CECE kg/cm 29,7kg/cm
........... 30,4kg/cm
30,4 30,4 32,6 29,7 29,7 29,7 32,6 32,6 32,6
Static linear load, rear CECE ............Static linear kg/cm
Static
load,
linear
Static
rearload,
CECE
29,2linear
rearload,
............
CECE CECEkg/cm
rear............ 27,9kg/cm
............ 29,2kg/cm
29,2 29,2 33,5 27,9 27,9 27,9 33,5 33,5 33,5
kg ......................................
Grossweight ......................................Grossweight
GrossweightGrossweight
......................................kg 13.000
10.500 ...................................... kg 10.500
kg 10.500 16.000 13.000
10.500 13.000 13.000 16.000 16.000 16.000
Dimensions Dimensions
Dimensions
Dimensions
Track radius, inner ............................Track radius,
Track
mm inner
radius,
Track
............................
4.900
inner
radius,............................
inner ............................
mm 4.673 mm 4.900
mm 4.900 4.9005.117 4.673 4.673 4.673 5.117 5.117 5.117
Asphalt
Max. travel speed ..............................
Max. travel
Max.
km/h
speed
travel
Max.
..............................
speed
0-travel
11,5 ..............................
speed ..............................
km/h0- 12,0
km/h0- 11,5
km/h
0- 11,5 0- 11,5
0- 12,0 0- 12,0 0- 12,0 0- 12,0 0- 12,0 0- 12,0 0- 12,0
0,136 Max. gradeability without/with vibr. ...Max. gradeability
Max.
% gradeability
Max.
without/with
35/30
gradeability
without/with
vibr.without/with
... vibr. ...%vibr.35/30
...% 35/30
% 35/30 35/3035/30 35/30 35/30 35/30 35/30 35/30 35/30
103
TANDEM ROLLERS Standard Equipment
ASPHALT MANAGER 2
Opti
RO
BW 161 AD-50 AM, BW 191 AD-50 AM, Highly wear resistant AM drum
Oscillation mode
+h
+4
BW 206 AD-50 AM 2 amplitudes / 2 frequencies rear RO
Autom. vibration operation RO
Individual vibration control Ro
Emergency stop button Cr
2
V-belt protection 2L
ASPHALT
MANAGER Pressure sprinkling system with 2 pumps Ed
Back-up alarm Ra
Battery disconnect switch Pri
Compartments for documents and tools Lig
BOMAG OPERATION PANEL (BOP) BO
EVIB-Control panel Ou
Asphalt temperature display BC
Fields of application: Compartments for documents and tools Lighting for drum edge front and rear
BOMAG OPERATION PANEL (BOP) BOMAG TELEMATIC
ASPHALT MANAGER (AM 2) is an intelligent compactionEVIB-Control
system which
panel auto- Outside mirrors
matically regulates amplitude. The AM 2 system is the enhanced successor
Asphalt temperature displayto BCM-Documentation system
BOMAG
Hellerwald
D-56154 Boppard
P.O. Box 5162
Tel. (0)6742 - 1000
Fax (0)6742 - 3090
Dimensions in mm
Dimensions
A in mm
B C D H H2 K L O S1 S2 W
A B C D H H2 K L O S1 S2 W
BW 161 AD-50 AM3620 1836 670 1220 2315 3050 250 4840 78 19 17 1680
BW 161AM
BW 191 AD-50 AD-50
3900AM3620
21781836760670 1220
1400 2315
2364 3050
3098 250250 4840 5300
78 19
89 17
22 1680
19 2000
BW 191 AD-50 AM3900 2178 760 1400 2364 3098 250 5300 89 22 19 2000
BW 206 AD-50 AM3900 23132313760760
BW 206 AD-50 AM3900
1400
1400
2364
2364
3098 250250 5300 5300
3098 89
89
22
22
19
19
2135
2135
104
TECHNICAL DATA
Technical Data Technical
Technical
Data
Technical
BOMAG
Data Data BOMAG
BOMAGBOMAG BOMAG
BOMAG BOMAGBOMAG BOMAG BOMAG BOMAGBOMAG
BW 161 AD-50 AM BWAD-50
BW 191 161
BWAD-50
AM
161
BWAM
AD-50
BW
161206
AD-50
AM BW
BWAD-50
191
AM 191
AD-50
AM BWAD-50
AM AM
191 AD-50
BW 206
AM
BW BW
AD-50
206 206 AD-50
AD-50
AM AM AM
Weights Weights
Weights
Weights
Operating weight CECE w. ROPS-cabin kgweightOperating
Operating
Operating CECE
weight w.CECE
10.200 weight
ROPS-cabin
w.CECE
ROPS-cabin kg 13.900
w. ROPS-cabin kg 10.200
kg 10.200 10.200
14.500 13.900 13.900 13.900 14.500 14.500 14.500
Grossweight ......................................Grossweight
Grossweight
kg ......................................
Grossweight
......................................
11.500 kg 15.000
...................................... kg 11.500
kg 11.500 11.500
16.000 15.000 15.000 15.000 16.000 16.000 16.000
Axle load, front CECE .......................Axle load, Axle
kgfront
load,CECE
Axle
front
load,
.......................
5.300CECEfront....................... kg 7.050
CECE ....................... kg 5.300
kg 5.300 5.3007.350 7.050 7.050 7.050 7.350 7.350 7.350
Axle load, rear CECE ........................Axle load, Axle
kgrearload,
CECE
Axle
rear
load,
........................
CECE
4.900 rear........................ kg 6.850
CECE ........................ kg 4.900
kg 4.900 4.9007.150 6.850 6.850 6.850 7.150 7.150 7.150
Static linear load, front CECE ...........Static linear Static
load,
kg/cm linear
Static
front
load,
linear
CECE
31,6 front
load,
...........
CECE front...........
CECE kg/cm 35,3kg/cm
........... 31,6kg/cm
31,6 31,6 34,4 35,3 35,3 35,3 34,4 34,4 34,4
Static linear load, rear CECE ............Static linear Static
load,
kg/cm linear
Static
rearload,
CECE
linear
29,2 rearload,
............
CECE CECEkg/cm
rear............ 34,3kg/cm
............ 29,2kg/cm
29,2 29,2 33,5 34,3 34,3 34,3 33,5 33,5 33,5
Dimensions Dimensions
Dimensions
Dimensions
Track radius, inner ............................Track radius,
Track
mm inner
radius,
Track
............................
4.900
inner
radius, ............................
inner ............................
mm 5.190 mm 4.900
mm 4.900 4.9005.117 5.190 5.190 5.190 5.117 5.117 5.117
Length (without towing hitch) ............Length (without
Length
mm (without
towing
Length4.840
hitch)
(without
towing ............
hitch)
towing ............
hitch)mm ............
5.300 mm 4.840
mm 4.840 4.8405.300 5.300 5.300 5.300 5.300 5.300 5.300
3
Asphalt
Driving Characteristics DrivingDriving
Characteristics
Driving
Characteristics
Characteristics
0,136 Max. travel speed ..............................Max. travel
Max.
km/hspeed
travel
Max.
..............................
speed
0-travel
12,0..............................
speed ..............................
km/h0- 12,0km/h
0- 12,0
km/h0- 12,0 0- 12,0
0- 12,0 0- 12,0 0- 12,0 0- 12,0 0- 12,0 0- 12,0 0- 12,0
Max. gradeability without/with vibr. ...Max. gradeability
Max.
% gradeability
Max.
without/with
40/30
gradeability
without/with
vibr.without/with
... vibr. ...%vibr.35/30
...% 40/30 % 40/30 40/3035/30 35/30 35/30 35/30 35/30 35/30 35/30
0,167
Drive Drive Drive Drive
Engine manufacturer .........................Engine manufacturer Engine manufacturer
EngineDeutz
.........................
manufacturer
......................... Deutz Deutz Deutz Deutz
......................... Deutz Deutz Deutz Deutz Deutz Deutz Deutz
Type ..................................................Type ..................................................
Type ..................................................
Type BF4M BF4M 2012
..................................................
2012 C BF4MC 2012 BF4M
C 2012BF4MCBF4M
20122012
C C 2012
BF4M BF4M
C 2012BF4MC 2012 BF4M
C 2012 C 2012
BF4M BF4MC 2012 C
Emission stage ..................................EmissionEmission stage ..................................
Emission
stage
Stage ..................................
stage Stage IIStage
..................................
II / TIER2 II /Stage
/ TIER2 TIER2II Stage
/ TIER2
Stage
II / TIER2
IIStage
/ TIER2 TIER2II Stage
II /Stage II / TIER2
/ TIER2 Stage II /Stage
TIER2II Stage
/ TIER2
II / TIER2
Cooling ..............................................Cooling ..............................................
Cooling Cooling
..............................................
Liquid Liquid Liquid Liquid Liquid
.............................................. Liquid Liquid Liquid Liquid Liquid Liquid Liquid
Number of cylinders ..........................Number Number of cylinders Number
of cylinders
..........................
4 of cylinders.......................... 4
.......................... 4 4 4 4 4 4 4 4 4 4
ng bow, Performance ISO 14396 ...................Performance Performance
kW ISOPerformance
14396 ISO...................
103,0 14396 ISO................... kW 103,0
14396 ................... kW 103,0kW 103,0 103,0103,0 103,0 103,0 103,0 103,0 103,0 103,0
Performance SAE J 1995 .................. PerformancePerformance
hp SAE Performance
J 1995SAE..................
138,0 J 1995
SAE.................. hp 138,0
J 1995 .................. hp 138,0hp 138,0 138,0138,0 138,0 138,0 138,0 138,0 138,0 138,0
dle Speed ................................................Speed ................................................
Speed
min-1 ................................................
Speed 2.500 min-12.500 min-1
................................................ min-1
2.500 2.500 2.5002.500 2.500 2.500 2.500 2.500 2.500 2.500
Dimensions in mm
e plate Brakes BrakesBrakesBrakes
w oil H Service
Service brake .................................... H1 brake
H2....................................
Service Lhydrost.
brake
Service L1....................................
W
....................................
brake hydrost.hydrost. hydrost. hydrost.
hydrost.hydrost. hydrost. hydrost. hydrost. hydrost. hydrost.
Parking brake ....................................Parking brake
Parking
....................................
Parking
brake multi
....................................
brake
disc ....................................
multi disc
multi discmulti disc
multimulti
disc disc
multi discmulti disc
multi disc multi discmulti disc
multi disc
BP 10/35 658 962 700 1084 532 350
Steering Steering
Steering
Steering
BP 12/40
Steering 658 Steering
system ................................ 962 Steering
700 Steering
system 1084 542 ................................
oscil.artic. 400
................................
system ................................
system oscil.artic.
oscil.artic.
oscil.artic.
oscil.artic.
oscil.artic.
oscil.artic.
oscil.artic.
oscil.artic. oscil.artic.
oscil.artic.
oscil.artic.
Exciter system ExciterExciter
system
Exciter
systemsystem
Vibrating drum ...................................VibratingVibrating
drum ...................................
Vibrating
drumrear................................... rear
drum ................................... rear rear rear rear rear rear rear rear rear rear
Technical
Autom. vibr. shutData Autom.
off ..........................Autom. vibr. off standard
shutvibr.
Autom...........................
shutvibr.
off .......................... standard
shut off ..........................
BOMAG
standardstandardstandard
standard
standardstandardstandard
BOMAG
standardstandardstandard
Frequency .........................................FrequencyFrequency
Hz.........................................
Frequency Hz 46/45
46/45 .........................................
......................................... Hz 46/45 46/4546/45 46/45 46/45 46/45
Hz 46/45 46/45 46/45 46/45
Amplitude ..........................................Amplitude
Amplitude
mm 0,87/0,44
..........................................
Amplitude mm 0,94/0,44
.......................................... mm
.......................................... BP 10/35
mm 0,87/0,44
0,87/0,44 BP
0,92/0,42
0,87/0,44 12/40
0,94/0,44 0,94/0,44
0,94/0,44 0,92/0,420,92/0,420,92/0,42
Centrifugal force ................................Centrifugal
Centrifugal 97/51
kN force Centrifugal
................................
force kN 129/95
................................
force ................................ kN 97/51 97/51129/95 129/95 129/95 129/95
kN 97/51 129/95 129/95 129/95
Centrifugal force ................................Centrifugal
Centrifugal
t force Centrifugal9,9/5,2
................................
force t
................................ 13,1/9,7
force ................................ t t
9,9/5,2 13,1/9,713,1/9,7 13,1/9,713,1/9,7
9,9/5,2 9,9/5,2 13,1/9,7 13,1/9,713,1/9,7
Weights
Vario system
Operating weight CECEVario system
Vario system
Vario system
........................................... kg 65 72
ASPHALT MANAGER .......................
Basic ASPHALT ASPHALT
MANAGER
ASPHALT
MANAGER
front
.......................
MANAGER
weight ............................................................. kg front 64
.......................
....................... front front front front front
71 front front front front front
Frequency .........................................FrequencyFrequency
Hz.........................................
Frequency Hz 46 Hz 46 Hz 46
.........................................
46 ......................................... 46 46 46 46 46 46 46 46
Amplitude directed ............................Amplitude Amplitude
directed Amplitude
directed
............................
autom./variable
directed
............................ autom./variable
............................ autom./variable
autom./variable
autom./variable autom./variable
autom./variable autom./variable
autom./variable autom./variable
autom./variable
autom./variable
Dimensions
Amplitude ..........................................Amplitude
Amplitude
mm..........................................
Amplitude mm 0- 0,87
..........................................
0- 0,92.......................................... mm0- 0,92 0- 0,92
mm0- 0,92 0- 0,85 0- 0,87 0- 0,87 0- 0,87 0- 0,85 0- 0,85 0- 0,85
Working width
Centifugal force ..........................................................
.................................
Centifugal
Centifugal
kNforce .................................
Centifugal
force
152................................. mm
kN 200kN 350
force ................................. 152 kN 152 152 200 400 200 200
200 200 200 200
Centifugal force .................................CentifugalCentifugal
t force .................................
Centifugal
force
15,5................................. 20,4t
force .................................
t 15,5t 15,5 15,5 20,4 20,4 20,4 20,4 20,4 20,4 20,4
Driving Characteristics
Capacities Capacities Capacities Capacities
Working speed, max. ...............................................
Fuel ...................................................Fuel ...................................................
Fuel
l
m/min
...................................................
Fuel 145,0
...................................................
l 165,0 l
25
145,0
l 145,0
25
145,0165,0 165,0 165,0 165,0 165,0 165,0 165,0
Max. gradeability (dep. on
Water .................................................Watersoil l con.) Water........................
.................................................
Water 750,0 %
................................................. l 30
.................................................
l 970,0 750,0
l 750,0 30
750,0970,0 970,0 970,0 970,0 970,0 970,0 970,0
Technical modifications reserved. Machines may be shownTechnical
with options.
modifications
Technical modifications
reserved.
Technical
Machines
modifications
reserved.
mayMachines
bereserved.
shownmay
with
Machines
beoptions.
shown may
with
beoptions.
shown with options.
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
105
TANDEM ROLLERS Standard Equipment
Front drum vibration: 2 amplitudes / 2
Opti
RO
BOMAG
Hellerwald
D-56154 Boppard
P.O. Box 5162
Tel. (0)6742 - 1000
Fax (0)6742 - 3090
Dimensions in mm
Dimensions
A in mm
B C D H H2 K L O S1 S2 W
BW 161 ADO - 50 3620 A 1836B 670C D
1220 H
2315 H2
3050 K250 L4840 O 78 S1 17 S2 20 W 1680
BW 202BW 161-ADO
ADO - 50 3620
50 3620 22911836670670 1220
1220 2315
2315 3050
3050 250
250 4840
4840 78 78 17 19 20 20 1680 2135
BW 202 ADO - 50 3620 2291 670 1220 2315 3050 250 4840 78 19 20 2135
106
TECHNICAL
Technical Data
DATA
Technical
Technical
Data Data BOMAG BOMAG
BOMAG
BOMAG BOMAG BOMAG
BW 161 ADO - 50 BWBW
161
202
BWADO
ADO
161- 50
ADO
- 50 -BW
50 202BW
ADO
202- 50
ADO - 50
Weights Weights
Weights
Operating weight CECE w. Operating
cab. ..............................
Operating
weight CECE weight cab.kg
w.CECE .............................. kg
w. cab. ..............................
9.800 kg 9.800
11.8509.800 11.850 11.850
Axle load, front CECE ..............................................
Axle load,Axle frontload,CECE front CECE kg
.............................................. kg
..............................................
5.100 kg 5.100
6.350 5.100 6.350 6.350
Axle load, rear CECE ...............................................
Axle load,Axle rearload,
CECE rear CECE kg
...............................................
...............................................
4.600 kg kg 4.600
5.500 4.600 5.500 5.500
Static linear load, front CECE Static..................................
linear
Static
load, linear
frontload,
CECE front kg/cm
..................................
CECE ..................................
30,4 kg/cm kg/cm
30,4
29,7 30,4 29,7 29,7
Static linear load, rear CECE Static...................................
linear
Static
load, linear
rearload,
CECE rear kg/cm
...................................
CECE ...................................
27,4 kg/cm kg/cm
27,4
25,8 27,4 25,8 25,8
Grossweight .............................................................
Grossweight Grossweight kg
.............................................................
.............................................................
10.800 kg kg 10.800
12.80010.800 12.800 12.800
Dimensions Dimensions
Dimensions
Track radius, inner ...................................................
Track radius, Trackinnerradius,...................................................
inner ...................................................
mm 4.900 mm mm4.900
4.673 4.900 4.673 4.673
Driving Characteristics
DrivingDriving
Characteristics
Characteristics
3
Asphalt
Max. travel speed .....................................................
Max. travel Max.speed
travel .....................................................
speed .....................................................
km/h 0- 12,0 km/h km/h
0- 12,0
0- 12,00- 12,0 0- 12,0 0- 12,0
0,136 Max. gradeability without/with
Max. vibr.
gradeability
Max.
..........................
gradeability
without/with without/with
vibr.
% ..........................
vibr. 35/30
..........................
% % 35/30
35/30 35/30 35/30 35/30
107
TANDEM ROLLERS Standard Equipment
ECOMODE
Opti
EC
BW 154 AP-4V, BW 174 AP-4F Plastic water tank under the operator's
platform
Ed
Ro
Water-saving pressure sprinklers Sp
Individual vibration control En
2 amplitudes / 2 frequencies To
Autom. vibration operation Pr
4 spring-loaded hinged scrapers Pr
Indicator and hazard lights Air
ROPS cabin with seat belts Ra
+ heating Lig
2 Outside mirrors Ba
Steering method/Operator's seat sliding / tec
rotatable Ad
Steering with comfort control As
- 5 Steering modes By
Back-up alarm BC
Emergency STOP BO
Brake release device Re
Split drums BO
Su
Dimensions in mm
Dimensions A
in mmB C D H1 K L O S W
BW 154 AP-4V A
2890 B
1665 C
735 D
1100 H1
2955 K240 L 3990 O 72 S 16 W 1500
BWBW
174154
AP-4F
AP-4V 3200
2890 1826
1665 660
735 1220
1100 3000 240
2955 288 4420 72 73
3990 16 17 15001680
BW 174 AP-4F 3200 1826 660 1220 3000 288 4420 73 17 1680
108
TECHNICAL
Technical Data
DATA
Technical
Technical
Data Data BOMAG BOMAG
BOMAG
BOMAG BOMAG BOMAG
BW 154 AP-4V BWBW
154174
BW
AP-4V
AP-4F
154 AP-4VBW 174BW
AP-4F
174 AP-4F
Weights Weights
Weights
Operating weight CECE Operating
w. ROPS-cabin Operating
weight.................
CECE
weight w.CECE kgw. ROPS-cabin
ROPS-cabin ................. kg
7.100................. kg 7.100
9.2007.100 9.200 9.200
Axle load, front / rear CECE Axle.....................................
load,Axlefrontload,
/ rear
front
CECE / rear kg 3.550/3.550kg
.....................................
CECE ..................................... kg 3.550/3.550
3.550/3.550
4.700/4.500 4.700/4.500
4.700/4.500
Static linear load, front / rear
Static CECE
linear
Static
.........................
load,linear
frontload,
/ rear front
CECEkg/cm
/ rear.........................
CECE23,7/23,7 kg/cm
......................... 23,7/23,7
kg/cm 23,7/23,7
28,0/26,8 28,0/26,828,0/26,8
Grossweight .............................................................
Grossweight Grossweight kg
.............................................................
.............................................................
8.600 kg kg 8.600
10.8008.600 10.800 10.800
Dimensions Dimensions
Dimensions
Track radius, inner ...................................................
Track radius, Trackinnerradius,
...................................................
inner ...................................................
mm 2.950 mm mm2.950
2.9462.950 2.946 2.946
Driving Characteristics
DrivingDriving
Characteristics
Characteristics
Speed (1) .................................................................
Speed (1)Speed .................................................................
(1) .................................................................
km/h 0 - 10,0 km/h km/h
0 - 10,0
0- 10,5
0 - 10,0 0- 10,5 0- 10,5
Asphalt
Engine manufacturer ................................................
Engine manufacturer
Engine manufacturer ................................................
................................................
Kubota Kubota
DeutzKubota Deutz Deutz
0,136 Type .........................................................................
Type .........................................................................
Type .........................................................................
V3307 CR-T V3307
TCDCR-T V3307
3.6 L4 CR-T TCD 3.6 L4TCD 3.6 L4
Emission stage .........................................................
EmissionEmissionstage .........................................................
stage .........................................................
StageV / TIER4f StageV
Stage / StageV
TIER4f / TIER4f
IV / TIER4f Stage IV Stage
/ TIER4f
IV / TIER4f
0,167 Exhaust gas aftertreatment Exhaust
......................................
gas
Exhaustaftertreatment
gas aftertreatment
......................................
......................................
DOC+DPF DOC+DPF
DPF+SCR DOC+DPF DPF+SCR DPF+SCR
Cooling .....................................................................
Cooling .....................................................................
Cooling .....................................................................
Liquid Liquid
LiquidLiquid Liquid Liquid
Number of cylinders .................................................
Number of Number
cylinders of cylinders
.................................................
.................................................
4 4 4 4 4 4
Fuel ..........................................................................
Fuel ..........................................................................
Fuel ..........................................................................
Diesel Diesel
DieselDiesel Diesel Diesel
Performance ISO 14396 Performance ..........................................
Performance
ISO 14396 ISO kW..........................................
..........................................
14396 55,4 kW kW 55,474,4 55,4 74,4 74,4
Performance SAE J 1995Performance ........................................
Performance
SAE J 1995 SAE........................................
J 1995hp ........................................
74,2 hp hp 74,299,6 74,2 99,6 99,6
ng bow, Speed ....................................................................... min-1
Speed ....................................................................... min-1
Speed .......................................................................
2.400 2.400
min-1 2.0002.400 2.000 2.000
Split drum .................................................................
Split drumSplit .................................................................
drum .................................................................
front + rear frontfront
+ rear
+front
rear+ rear front + rear
front + rear
dle Brakes BrakesBrakes
Dimensions in mm
e plate Service brake ...........................................................
Service brake Service ...........................................................
brake ...........................................................
hydrost. hydrost.
hydrost.
hydrost. hydrost. hydrost.
w oil H brake H1
Parking H2
Parking brake ...........................................................
Parking L L1 mech. W
...........................................................
brake ........................................................... mech.
mech.mech. mech. mech.
Steering
BP 10/35 Steering
658Steering
962 700 1084 532 350
Steering system .......................................................
Steering systemSteering.......................................................
system .......................................................
2-p. pivoted 2-p.2-p.
pivoted
pivoted
2-p. pivoted 2-p. pivoted
2-p. pivoted
BP 12/40
Lateral 658
displacement right/left
Lateral 962displacement
700 ..................................
..................................
displacement
Lateral right/left 1084
right/left
mm 542 400 mm
..................................
1.130 mm1.1301.3501.130 1.350 1.350
Exciter system ExciterExciter
systemsystem
Frequency ................................................................
Frequency Frequency Hz 40/55
................................................................ Hz
................................................................ Hz 40/55
45/6040/55 45/60 45/60
Technical Data AmplitudeAmplitude
Amplitude ................................................................. mm 0,66/0,32 mm
.................................................................
................................................................. mm0,66/0,32
BOMAG 0,66/0,32
0,46/0,20 0,46/0,200,46/0,20
BOMAG
Centrifugal force .......................................................
Centrifugal Centrifugal kN 69/63
force ....................................................... kN
force ....................................................... kN 69/63
80/6169/63 80/61 80/61
Sprinkler System Sprinkler
Sprinkler
SystemSystem BP 10/35 BP 12/40
Type of sprinkling .....................................................
Type of sprinkling
Type of sprinkling
.....................................................
.....................................................
pressure pressure
pressure
pressure pressure pressure
Weights
Capacities Capacities Capacities
Operating weightFuel CECE Fuel...........................................
Fuel ..........................................................................
.......................................................................... lkg
..........................................................................
l 155,0 l 65
155,0
180,0155,0 72
180,0 180,0
Basic weight .............................................................
Water .......................................................................
Water ....................................................................... lkg
Water .......................................................................
l 550,0 l 64
550,0
680,0550,0 71
680,0 680,0
Technical modifications reserved. Machines
Technical
may be
modifications
shown
Technical
withreserved.
modifications
options. Machines
reserved.
mayMachines
be shownmay
with be
options.
shown with options.
Dimensions
Working width .......................................................... mm 350 400
Driving Characteristics
Working speed, max. ............................................... m/min 25 25
Max. gradeability (dep. on soil con.) ........................ % 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
109
HYBRID - ASPHALT MANAGER 2 Standard Equipment
ECOMODE
Opti
Ed
110
TECHNICAL
Technical Data
DATA
Technical Data BOMAG BOMAG
BW 174 HYBRID BW 174 HYBRID
Weights Weights
Operating weight CECE w. Operating
ROPS-cabin weight ................. kg
CECE w. ROPS-cabin .................
9.500 kg 9.500
Axle load, front / rear CECE Axle..................................... kg 5.000/4.500 kg
load, front / rear CECE ..................................... 5.000/4.500
Static linear load, front / rear
StaticCECElinear.........................
load, front / rear CECEkg/cm.........................
29,8/26,8 kg/cm 29,8/26,8
Grossweight ............................................................. kg
Grossweight .............................................................
11.100 kg 11.100
Driving Characteristics
Driving Characteristics
Speed (1) .................................................................
Speed (1) .................................................................
km/h 0- 10,2 km/h 0- 10,2
Drive Drive
Engine manufacturer ................................................
Engine manufacturer ................................................
Kubota Kubota
Type .........................................................................
Type .........................................................................
V3307 CR-T V3307 CR-T
3
Asphalt
Emission stage .........................................................
Emission stage .........................................................
StageV / TIER4f StageV / TIER4f
Exhaust gas aftertreatment Exhaust
......................................
gas aftertreatment ......................................
DPF DPF
0,136
Cooling .....................................................................
Cooling .....................................................................
Liquid Liquid
0,167 Number of cylinders .................................................
Number of cylinders .................................................
4 4
Performance ISO 14396 ..........................................
Performance ISO 14396 ..........................................
kW 55,4 kW 55,4
Performance SAE J 1995Performance ........................................
SAE J 1995 ........................................
hp 74,3 hp 74,3
Performance HYBRID ..............................................
Performance HYBRID ..............................................
kW 20,0 kW 20,0
System performance ................................................
System performance ................................................
kW 75,4 kW 75,4
Speed .......................................................................
Speed .......................................................................
min-1 2.400 min-1 2.400
ng bow, Split drum .................................................................
Split drum .................................................................
front + rear front + rear
Brakes Brakes
dle Service brake ...........................................................
Service brake ...........................................................
hydrost. hydrost.
Dimensions in mm
Parking brake ...........................................................
Parking brake ...........................................................
mech. mech.
e plate
w oil Steering H
Steering H1 H2 L L1 W
Steering system .......................................................
Steering system .......................................................
2-p. pivoted 2-p. pivoted
BP 10/35
Lateral 658
displacement right/left
Lateral 962 700 right/left 1084
..................................
displacement 532 1.350 350
..................................
mm mm 1.350
BP 12/40
Exciter system 658 system
Exciter 962 700 1084 542 400
Amplitude ................................................................. mm
Amplitude .................................................................
0,46/0,20 mm 0,46/0,20
Frequency ................................................................ Hz
Frequency ................................................................
45/46 Hz 45/46
Centrifugal force ....................................................... kN
Centrifugal force .......................................................
80/36 kN 80/36
Technical Data BOMAG BOMAG
Vario system Vario system
ASPHALT MANAGER .............................................
ASPHALT MANAGER .............................................
front front
BP 10/35 BP 12/40
Frequency ................................................................ Hz
Frequency ................................................................
46 Hz 46
Amplitude directed (hor./vert.) Amplitude
.................................. mm
directed (hor./vert.) ..................................
0,73 mm 0,73
Weights
Centifugal force ........................................................ kN
Centifugal force ........................................................
146 kN 146
Operating weight CECE ........................................... kg 65 72
Capacities
Basic Capacities
weight ............................................................. kg 64 71
Fuel ..........................................................................
Fuel ..........................................................................
l 180,0 l 180,0
Water .......................................................................
Water ....................................................................... l 750,0 l 750,0
Dimensions
Technical modifications reserved. Machines
Technical
may bemodifications
shown with options.
reserved. Machines may be shown with options.
Working width .......................................................... mm 350 400
Driving Characteristics
Working speed, max. ............................................... m/min 25 25
Max. gradeability (dep. on soil con.) ........................ % 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
111
TANDEM ROLLERS Standard Equipment
Front drum vibration: 2 amplitudes / 2
Opt
EC
112
TECHNICAL
Technical Data
DATA
Technical
Technical
Data Data BOMAG BOMAG
BOMAG
BOMAG BOMAG BOMAG
BW 154 APO-4V BWBW
154
174
BWAPO-4V
APO-4F BW 174BW
154 APO-4V 174 APO-4F
APO-4F
Weights Weights
Weights
Operating weight CECE w. Operating
ROPS-cabinOperating
weight .................
CECE
weight w.CECE kg w. ROPS-cabin
ROPS-cabin ................. kg
7.300 ................. kg 7.300
9.500 7.300 9.500 9.500
Axle load, front / rear CECE Axle.....................................
load,Axle
frontload,/ rearfront
CECE / rear kg 3.550/3.750 kg
.....................................
CECE ..................................... kg 3.550/3.750
3.550/3.750
4.500/5.000 4.500/5.000
4.500/5.000
Static linear load, front / rear
StaticCECElinear
Static
.........................
load, linear
frontload,
/ rearfront kg/cm
CECE / rear.........................
CECE23,7/25,0 kg/cm
......................... 23,7/25,0
kg/cm 23,7/25,0
26,8/29,8 26,8/29,826,8/29,8
Grossweight .............................................................
Grossweight Grossweight kg
.............................................................
.............................................................
8.800 kg kg 8.800
11.1008.800 11.100 11.100
Dimensions Dimensions
Dimensions
Track radius, inner ...................................................
Track radius, Trackinnerradius,...................................................
inner ...................................................
mm 2.950 mm mm2.950
2.946 2.950 2.946 2.946
Driving Characteristics
DrivingDriving
Characteristics
Characteristics
Speed (1) .................................................................
Speed (1)Speed .................................................................
(1) .................................................................
km/h 0 - 10,0 km/h km/h
0 - 0-
10,0
10,50 - 10,0 0- 10,5 0- 10,5
Asphalt
Engine manufacturer ................................................
Engine manufacturer
Engine manufacturer ................................................
................................................
Kubota Kubota
DeutzKubota Deutz Deutz
0,136 Type .........................................................................
Type .........................................................................
Type .........................................................................
V3307 CR-T V3307
TCDCR-TV3307
3.6 L4 CR-T TCD 3.6 L4TCD 3.6 L4
Emission stage .........................................................
EmissionEmissionstage .........................................................
stage .........................................................
StageV / TIER4f StageV
Stage/ StageV
TIER4f / TIER4f
IV / TIER4f Stage IV Stage
/ TIER4f
IV / TIER4f
0,167 Exhaust gas aftertreatment Exhaust
......................................
gas
Exhaustaftertreatment
gas aftertreatment
......................................
......................................
DOC+DPF DOC+DPF
DPF+SCRDOC+DPF DPF+SCR DPF+SCR
Cooling .....................................................................
Cooling .....................................................................
Cooling .....................................................................
Liquid Liquid
LiquidLiquid Liquid Liquid
Number of cylinders .................................................
Number of Number
cylinders of cylinders
.................................................
.................................................
4 4 4 4 4 4
Fuel ..........................................................................
Fuel ..........................................................................
Fuel ..........................................................................
Diesel Diesel
DieselDiesel Diesel Diesel
Performance ISO 14396 Performance ..........................................
Performance
ISO 14396 ISO kW..........................................
..........................................
14396 55,4 kW kW 55,474,4 55,4 74,4 74,4
Performance SAE J 1995Performance ........................................
Performance
SAE J 1995 hp ........................................
SAE........................................
J 1995 74,2 hp hp 74,299,6 74,2 99,6 99,6
ng bow, Speed ....................................................................... min-1
Speed ....................................................................... min-1
Speed .......................................................................
2.400 2.400
min-1 2.000 2.400 2.000 2.000
Split drum .................................................................
Split drumSplit .................................................................
drum .................................................................
front + rear front + rear
front +front
rear+ rear front + rear
front + rear
dle Brakes BrakesBrakes
Dimensions in mm
e plate Service brake ...........................................................
Service brake Service ...........................................................
brake ...........................................................
hydrost. hydrost.
hydrost.
hydrost. hydrost. hydrost.
w oil H brake H1
Parking H2
Parking brake ...........................................................
Parking L L1 mech. W
...........................................................
brake ........................................................... mech.
mech.mech. mech. mech.
Steering
BP 10/35 Steering
658Steering
962 700 1084 532 350
Steering system .......................................................
Steering system
Steering.......................................................
system .......................................................
2-p. pivoted 2-p.2-p.
pivoted
pivoted
2-p. pivoted 2-p. pivoted
2-p. pivoted
BP 12/40
Lateral 658
displacement right/left
Lateral 962displacement
700 ..................................
..................................
displacement
Lateral right/left 1084
right/left
mm 542 400 mm
..................................
1.130 mm1.1301.350 1.130 1.350 1.350
Exciter system ExciterExciter
systemsystem
Vibrating drum ..........................................................
Vibrating Vibrating front
drum ..........................................................
drum .......................................................... front
front front front front
Technical
Autom. vibr. shutDataoff .................................................
Autom. vibr. Autom.shutvibr. standard
off .................................................
shut off ................................................. standard standard
standard standard standard
Frequency ................................................................
Frequency Frequency Hz 45/46
................................................................ Hz
................................................................ HzBOMAG
45/46
45/46 45/46 BOMAG
45/46 45/46
Amplitude .................................................................
AmplitudeAmplitude mm 0,66/0,32 mm
.................................................................
................................................................. mmBP 10/35
0,66/0,32 0,66/0,32
0,46/0,20 BP 12/40
0,46/0,200,46/0,20
Centrifugal force .......................................................
Centrifugal Centrifugal kN 69/63
force ....................................................... kN
force ....................................................... kN 69/6380/61 69/63 80/61 80/61
Centrifugal force .......................................................
Centrifugal Centrifugal t 7,0/6,4
force ....................................................... t
force ....................................................... t 7,0/6,4
8,2/6,27,0/6,4 8,2/6,2 8,2/6,2
Weights
Oscillating drum .......................................................
Oscillating Oscillating rear
drum .......................................................
drum ....................................................... rearrear rear rear rear
Operating weight CECE ...........................................
O. Frequency ...........................................................
O. Frequency O. Frequency Hz 45
........................................................... kg
Hz
........................................................... Hz 65
45 45 45 72 45
45
Basic weight
O. Amplitude .............................................................
............................................................
O. Amplitude O. Amplitude mm 0,80
............................................................ kg
mm
............................................................ mm640,800,73 0,80 71 0,73
0,73
Sprinkler System Sprinkler
Dimensions Sprinkler
SystemSystem
Type of sprinkling .....................................................
Type of sprinkling
Type of sprinkling
.....................................................
.....................................................
pressure pressure
pressure
pressure pressure pressure
Working width .......................................................... mm 350 400
Capacities Capacities
Capacities
Fuel ..........................................................................
Fuel ..........................................................................
Fuel ..........................................................................
l 155,0 l l 155,0
180,0 155,0 180,0 180,0
Driving Characteristics
Water .......................................................................
Water .......................................................................
Water .......................................................................
l 550,0 l l 550,0
680,0 550,0 680,0 680,0
Working speed, max.
Technical modifications reserved. Machines
Technical
may be
...............................................
modifications
shown
Technical
with reserved.
options.
modifications
Machines
reserved.
mayMachines
be shownmay
with be
options.
shown with options.
m/min 25 25
Max. gradeability (dep. on soil con.) ........................ % 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
113
ASPHALT MANAGER – TANDEM ROLLERS Standard Equipment
ECOMODE
Opti
Ed
114
TECHNICAL
Technical Data
DATA
Technical
Technical
Data Data BOMAG BOMAG
BOMAG
BOMAG BOMAG BOMAG
BW 154 AP-4V AM BWBW
154
174
BWAP-4V
AP-4F
154 AM
AP-4V
AM BW
AM174BW
AP-4F
174 AM
AP-4F AM
Weights Weights
Weights
Operating weight CECE w. Operating
ROPS-cabinOperating
weight .................
CECE
weight w.CECE kg w. ROPS-cabin
ROPS-cabin ................. kg
7.300 ................. 9.500 7.300
kg 7.300 9.500 9.500
Axle load, front / rear CECE Axle.....................................
load,Axle
frontload,/ rearfront
CECE / rear kg
.....................................
CECE 3.750/3.550 kg
..................................... 3.750/3.550
kg 3.750/3.550
5.000/4.500 5.000/4.500
5.000/4.500
Static linear load, front / rear
StaticCECElinear
Static
.........................
load, linear
frontload,
/ rearfront kg/cm
CECE / rear.........................
CECE25,0/23,7 kg/cm
......................... kg/cm 25,0/23,7
29,8/26,8
25,0/23,7 29,8/26,829,8/26,8
Grossweight .............................................................
Grossweight Grossweight kg
.............................................................
.............................................................
8.800 kg 11.1008.800
kg 8.800 11.100 11.100
Driving Characteristics
DrivingDriving
Characteristics
Characteristics
Speed (1) .................................................................
Speed (1)Speed .................................................................
(1) .................................................................
km/h 0 - 10,0 km/h km/h
0 - 0-
10,0
10,50 - 10,0 0- 10,5 0- 10,5
Drive Drive Drive
Engine manufacturer ................................................
Engine manufacturer
Engine manufacturer ................................................
................................................
Kubota DeutzKubota
Kubota Deutz Deutz
Type .........................................................................
Type .........................................................................
Type .........................................................................
V3307 CR-T TCDCR-T
V3307 V3307
3.6 L4 CR-T TCD 3.6 L4TCD 3.6 L4
3
Asphalt
Emission stage .........................................................
EmissionEmissionstage .........................................................
stage .........................................................
StageV / TIER4f Stage/ StageV
StageV TIER4f / TIER4f
IV / TIER4f Stage IV Stage
/ TIER4f
IV / TIER4f
0,136 Exhaust gas aftertreatment Exhaust
......................................
gas
Exhaustaftertreatment
gas aftertreatment
......................................
......................................
DOC+DPF DPF+SCR
DOC+DPF DOC+DPF DPF+SCR DPF+SCR
Cooling .....................................................................
Cooling .....................................................................
Cooling .....................................................................
Liquid LiquidLiquid
Liquid Liquid Liquid
0,167 Number of cylinders .................................................
Number of Number
cylinders of cylinders
.................................................
.................................................
4 4 4 4 4 4
Performance ISO 14396 Performance ..........................................
Performance
ISO 14396 ISO ..........................................
14396 kW..........................................
55,4 kW kW 55,474,4 55,4 74,4 74,4
Performance SAE J 1995Performance ........................................
Performance
SAE J 1995 hp ........................................
SAE........................................
J 1995 74,2 hp hp 74,299,6 74,2 99,6 99,6
Speed ....................................................................... min-1
Speed .......................................................................
Speed .......................................................................
2.400 min-1 min-1 2.000 2.400
2.400 2.000 2.000
Split drum .................................................................
Split drumSplit .................................................................
drum .................................................................
front + rear front
front +front
+ rear rear+ rear front + rear
front + rear
Brakes BrakesBrakes
ng bow, Service brake ...........................................................
Service brake Service ...........................................................
brake ...........................................................
hydrost. hydrost.
hydrost.
hydrost. hydrost. hydrost.
Parking brake ...........................................................
Parking brake Parking ...........................................................
brake ...........................................................
mech. mech.
mech.mech. mech. mech.
dle Steering Steering Steering
Dimensions in mm
e plate Steering system .......................................................
Steering system
Steering.......................................................
system .......................................................
2-p. pivoted 2-p.2-p.
pivoted
pivoted
2-p. pivoted 2-p. pivoted
2-p. pivoted
w oil Lateral displacement right/left H..................................
Lateral H1displacement
displacement
Lateral H2
right/left L L1 W
..................................
right/left
mm ..................................
1.130 mm mm1.1301.350 1.130 1.350 1.350
Exciter
BP 10/35system Exciter
658Exciter
system
962 system
700 1084 532 350
Amplitude .................................................................
AmplitudeAmplitude mm 0,66/0,32 mm
.................................................................
................................................................. mm0,66/0,32 0,66/0,32
0,46/0,20 0,46/0,200,46/0,20
BP 12/40................................................................
Frequency 658Frequency
Frequency 962 ................................................................
700 1084 Hz 542 45/46 400 Hz
................................................................ 45/45 45/46
Hz 45/46 45/45 45/45
Centrifugal force .......................................................
Centrifugal Centrifugal kN
force .......................................................
force .......................................................
88/44 kN 80/34 88/44
kN 88/44 80/34 80/34
Vario system Vario system
Vario system
ASPHALT MANAGER
Technical Data.............................................
ASPHALT ASPHALT
MANAGER MANAGER
.............................................
.............................................
front front front
front front front
Frequency ................................................................
Frequency Frequency Hz
................................................................
................................................................
45 Hz HzBOMAG
45 46 45 BOMAG
46 46
Amplitude directed (hor./vert.) Amplitude
..................................
Amplitude
directed (hor./vert.) mm
directed (hor./vert.)
..................................
..................................
0- 0,80 mm mm0- 0,80 0- 0,80
BP0,7310/35 0,73
BP 0,73
12/40
Centifugal force ........................................................
CentifugalCentifugal kN
force ........................................................
force ........................................................
119 kN kN 119146 119 146 146
Weights
Capacities Capacities Capacities
Fuel ..........................................................................
Operating weightFuel CECE..........................................................................
Fuel ..........................................................................
Water .......................................................................
l
........................................... 155,0
Water .......................................................................
550,0
l
kg
Water .......................................................................
l l
l
l
155,0
65 180,0 155,0
550,0
680,0 550,0
180,0
72
680,0
180,0
680,0
Basic weight .............................................................
Technical modifications reserved. Machines
Technical
may be
modifications
shown
Technical
with reserved.
options.
modifications
Machines
reserved.
mayMachines
be shownmay
with be
options.
shown with options.
kg 64 71
Dimensions
Working width .......................................................... mm 350 400
Driving Characteristics
Working speed, max. ............................................... m/min 25 25
Max. gradeability (dep. on soil con.) ........................ % 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
115
TANDEM ROLLER Standard Equipment
2 amplitudes / 2 frequencies
Opti
*R
BOMAG
Hellerwald
D-56154 Boppard
P.O. Box 5162
Tel. (0)6742 - 1000
Fax (0)6742 - 3090
Dimensions in mm
Dimensions in mm
A B C D H H2 K L O S W
A B C D H H2 K L O S W
BW 161 AD-4 3300 1840 715 1220 3000 2320 350 4610 80 17 1680
BW 161 AD-4 3300 1840 715 1220 3000 2320 350 4610 80 17 1680
116
TECHNICAL
Technical Data
DATA
Technical Data BOMAG BOMAG
BW 161 AD-4 BW 161 AD-4
Weights Weights
Operating weight CECE w. Operating
cab. ..............................
weight CECE w. cab.kg ..............................
10.050 kg 10.050
Axle load, front CECE ..............................................
Axle load, front CECE ..............................................
kg 5.050 kg 5.050
Axle load, rear CECE ...............................................
Axle load, rear CECE ...............................................
kg 5.000 kg 5.000
Static linear load, front CECE Static..................................
linear load, front CECE ..................................
kg/cm 30,1 kg/cm 30,1
Static linear load, rear CECE Static...................................
linear load, rear CECE ...................................
kg/cm 29,8 kg/cm 29,8
Grossweight .............................................................
Grossweight .............................................................
kg 11.500 kg 11.500
Dimensions Dimensions
Track radius, inner ...................................................
Track radius, inner ...................................................
mm 4.400 mm 4.400
Driving Characteristics
Driving Characteristics
3
Asphalt
Speed (1) .................................................................
Speed (1) .................................................................
km/h 0- 5,7 km/h 0- 5,7
0,136 Speed (2) .................................................................
Speed (2) .................................................................
km/h 0- 11,0 km/h 0- 11,0
Drive Drive
0,167 Engine manufacturer ................................................
Engine manufacturer ................................................
Deutz Deutz
Type .........................................................................
Type .........................................................................
TCD 2011 L04 w TCD 2011 L04 w
Emission stage .........................................................
Emission stage .........................................................
Stage IIIa / TIER3 Stage IIIa / TIER3
Cooling .....................................................................
Cooling .....................................................................
Liquid Liquid
Number of cylinders .................................................
Number of cylinders .................................................
4 4
Performance ISO 14396 Performance ..........................................
ISO 14396 ..........................................
kW 74,9 kW 74,9
ng bow, Speed .......................................................................
Speed .......................................................................
min-1 2.300 min-1 2.300
Electric equipment ...................................................
Electric equipment ...................................................
V 12 V 12
dle Brakes Brakes
Dimensions in mm
e plate Service brake ...........................................................
Service brake ...........................................................
hydrost. hydrost.
w oil H brakeH1 H2 L
Parking brake ...........................................................
Parking L1 mech. W
........................................................... mech.
Steering
BP 10/35 Steering
658 962 700 1084 532 350
Steering system .......................................................
Steering system .......................................................
oscil.artic. oscil.artic.
BP 12/40
Lateral displacement right/left658
Lateral 962 right/left700 ..................................
..................................
displacement 1084
mm 542170400 mm 170
Exciter system Exciter system
Vibrating drum ..........................................................
Vibrating drum ..........................................................
front + rear front + rear
Technical
Autom. vibr. shutDataoff .................................................
Autom. vibr. shut off .................................................
standard standard
BOMAG BOMAG
Frequency ................................................................
Frequency ................................................................
Hz 40/50 Hz 40/50
Amplitude .................................................................
Amplitude .................................................................
mm 0,94/0,42 mm BP 10/35
0,94/0,42 BP 12/40
Centrifugal force .......................................................
Centrifugal force .......................................................
kN 107/74 kN 107/74
Centrifugal force .......................................................
Centrifugal force .......................................................
t 10,9/7,5 t 10,9/7,5
Weights
Capacities weightCapacities
Operating CECE ........................................... kg 65 72
Fuel ..........................................................................
Fuel ..........................................................................
l 200,0 l 200,0
Basic weight ............................................................. kg 64 71
Water .......................................................................
Water .......................................................................
l 1.000,0 l 1.000,0
Dimensions
Technical modifications reserved. Machines
Technical
may be
modifications
shown with reserved.
options. Machines may be shown with options.
117
TANDEM ROLLERS Standard Equipment
2 amplitudes / 2 frequencies
Opti
*R
BOMAG
Hellerwald
D-56154 Boppard
P.O. Box 5162
Tel. (0)6742 - 1000
Fax (0)6742 - 3090
Dimensions in mm
Dimensions in mm
A B C D H H2 K L O S W
A B C D H H2 K L O S W
BW 202 AD-4 BW 3300
202 AD-4
229533007152295 1220
715
3000
1220
2320 2320
3000
350 3504610461080 80 1919 2135
2135
BW 203 AD-4 BW 3300
203 AD-4 229533007152295 1236
715 3000
1236 2320 2320
3000 350 3504610461080 80 2727 2135
2135
118
TECHNICAL
Technical Data
DATA
Technical
Technical
Data Data BOMAG BOMAG
BOMAG
BOMAG BOMAG BOMAG
BW 202 AD-4 BW 202
BW 203
BWAD-4
202 AD-4 BW 203BW
AD-4 203 AD-4
AD-4
Weights Weights
Weights
Operating weight CECE w. Operating
ROPS-cabinOperating
weight .................
CECE
weight w.CECE kgw. ROPS-cabin
ROPS-cabin .................
11.800 kg
................. kg 11.800 11.800
13.200 13.200 13.200
Axle load, front CECE ..............................................
Axle load,Axle front load,
CECE front CECE kg
..............................................
..............................................
5.900 kg 6.6005.900
kg 5.900 6.600 6.600
Axle load, rear CECE ...............................................
Axle load,Axle rearload,
CECE rear kg
...............................................
CECE ...............................................
5.900 kg kg 5.900
6.6005.900 6.600 6.600
Static linear load, front CECE Static..................................
linear
Static
load,linear
frontload,
CECE front kg/cm
..................................
CECE ..................................
27,6 kg/cm kg/cm 30,9 27,6
27,6 30,9 30,9
Static linear load, rear CECE Static...................................
linear
Static
load,linear
rearload,
CECE rear kg/cm
...................................
CECE ...................................
27,6 kg/cm kg/cm 30,9 27,6
27,6 30,9 30,9
Grossweight .............................................................
Grossweight Grossweight kg
.............................................................
.............................................................
14.000 kg kg 14.000 14.000
14.000 14.000 14.000
Dimensions Dimensions
Dimensions
Track radius, inner ...................................................
Track radius, Trackinnerradius,...................................................
inner ...................................................
mm 4.170 mm mm4.170
4.1704.170 4.170 4.170
Driving Characteristics
DrivingDriving
Characteristics
Characteristics
3
Asphalt
Speed (1) .................................................................
Speed (1)Speed km/h
.................................................................
(1) .................................................................
0- 6,0 km/h km/h 0- 6,00- 6,0
0- 6,0 0- 6,0 0- 6,0
0,136 Speed (2) .................................................................
Speed (2)Speed km/h
.................................................................
(2) .................................................................
0- 11,0 km/h km/h 0- 11,0
0- 11,0
0- 11,0 0- 11,0 0- 11,0
Max. gradeability without/with Max. vibr.
gradeability
Max.
..........................
gradeability
without/with % ..........................
without/with
vibr. vibr. 40/35 %
.......................... % 40/35
40/3540/35 40/35 40/35
0,167
Drive Drive Drive
Engine manufacturer ................................................
Engine manufacturer
Engine manufacturer ................................................
................................................
Deutz DeutzDeutz
Deutz Deutz Deutz
Type .........................................................................
Type .........................................................................
Type .........................................................................
TCD 2012 L04 2V TCD TCD
2012 TCD
2012L042012
L04
2V 2V L04 2V TCD 2012 TCD
L042012
2V L04 2V
Emission stage .........................................................
EmissionEmission
stage .........................................................
stage .........................................................
Stage IIIa / TIER3 Stage IIIaStage
Stage IIIa IIIa / TIER3
/ TIER3
/ TIER3 Stage IIIaStage
/ TIER3
IIIa / TIER3
Cooling .....................................................................
Cooling .....................................................................
Cooling .....................................................................
Liquid LiquidLiquid
Liquid Liquid Liquid
Number of cylinders .................................................
Number of Number
cylinders of cylinders
.................................................
.................................................
4 4 4 4 4 4
ng bow, Performance ISO 14396 Performance ..........................................
Performance
ISO 14396 ISO ..........................................
14396 kW..........................................
100,0 kW kW 100,0100,0100,0 100,0 100,0
Speed ....................................................................... min-1
Speed .......................................................................
Speed .......................................................................
2.300 min-1 min-1 2.3002.300
2.300 2.300 2.300
dle Electric equipment ...................................................
Electric equipment
Electric equipment V
...................................................
...................................................
12 V V 12 12 12 12 12
Dimensions in mm
e plate Brakes BrakesBrakes
Service brake ...........................................................
Service
H brake Service
H1 ...........................................................
brake H2 ...........................................................
L L1 hydrost. W hydrost.
hydrost.
hydrost. hydrost. hydrost.
w oil Parking brake ...........................................................
Parking brake Parking ...........................................................
brake ...........................................................
mech. mech.
multi disc
mech. multi discmulti disc
BP 10/35 658 962 700 1084 532 350
Steering Steering
Steering
BP 12/40
Steering 658Steering 962.......................................................
700.......................................................
system .......................................................
Steering system system 1084 542oscil.artic. 400 oscil.artic.
oscil.artic.
oscil.artic. oscil.artic.
oscil.artic.
Lateral displacement right/left
Lateral..................................
displacement
Lateral displacementright/left ..................................
right/left
mm ..................................
170 mm mm170170 170 170 170
Steering / oscillating angle
Steering
+/- ..................................
Steering
/ oscillating / oscillating
angle +/-angle
..................................
grad +/- ..................................
30/6 grad 30/6 30/6
grad30/6 30/6 30/6
Exciter system
Technical Data Exciter Exciter
systemsystem
Vibrating drum ..........................................................
VibratingVibrating
drum ..........................................................
drum ..........................................................
front + rear BOMAG
front
front +front
+ rearrear+ rear BOMAG
front + rear
front + rear
Autom. vibr. shut off .................................................
Autom. vibr. Autom.shutvibr.
off .................................................
shut off .................................................
standard standard
standard
standard standardstandard
Frequency ................................................................
Frequency Frequency Hz
................................................................ Hz
................................................................
40/50 BP 10/35
40/5040/50
Hz 40/50 BP 12/40
40/50 40/50
Amplitude .................................................................
Amplitude Amplitude mm 0,81/0,35 mm
.................................................................
................................................................. mm0,81/0,35 0,81/0,35
0,69/0,29 0,69/0,290,69/0,29
Weights
Centrifugal force .......................................................
Centrifugal Centrifugal kN
force .......................................................
force .......................................................
126/84 kN kN 126/84
126/84126/84 126/84 126/84
Operating
Centrifugal forceweight CECE ...........................................
.......................................................
Centrifugal Centrifugal
force t
....................................................... kg
t
force .......................................................
12,8/8,6 t 65
12,8/8,6 12,8/8,6
12,8/8,6 72 12,8/8,6
12,8/8,6
Basic weight .............................................................
Capacities Capacities
Capacities kg 64 71
Fuel ..........................................................................
Fuel ..........................................................................
Fuel ..........................................................................
l 200,0 l l 200,0
200,0200,0 200,0 200,0
Dimensions
Water .......................................................................
Water .......................................................................
Water .......................................................................
l 1.000,0 l l 1.000,0
1.000,0
1.000,0 1.000,0 1.000,0
Working width
Technical modifications ..........................................................
reserved. Machines
Technical
may be
modifications
shown
Technical
with reserved.
modifications
options. Machines
reserved.
mayMachines
be shownmay
withbe shown with options. mm
options. 350 400
Driving Characteristics
Working speed, max. ............................................... m/min 25 25
Max. gradeability (dep. on soil con.) ........................ % 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
119
Standard Equipment Opti
TANDEM ROLLER Front drum vibration: 2 amplitudes / 2 *R
BOMAG
Hellerwald
D-56154 Boppard
P.O. Box 5162
Tel. (0)6742 - 1000
Fax (0)6742 - 3090
Dimensions in mm
Dimensions inAmm B C D H H2 K L O S1 S2 W
BW 203 ADO-4 3300 2295 715 1236 2320 3000 350 4610 80 27 20 2135
A B C D H H2 K L O S1 S2 W
BW 203 ADO-4 3300 2295 715 1236 2320 3000 350 4610 80 27 20 2135
120
TECHNICAL
Technical Data
DATA
Technical Data BOMAG BOMAG
BW 203 ADO-4 BW 203 ADO-4
Weights Weights
Operating weight CECE w. Operating weight CECE w. cab.kg
cab. .............................. ..............................
12.600 kg 12.600
Axle load, front CECE .............................................. kg
Axle load, front CECE ..............................................
6.198 kg 6.198
Axle load, rear CECE ............................................... kg
Axle load, rear CECE ...............................................
5.912 kg 5.912
Static linear load, front CECE Static.................................. kg/cm
linear load, front CECE ..................................
29,0 kg/cm 29,0
Static linear load, rear CECE Static................................... kg/cm
linear load, rear CECE ...................................
27,7 kg/cm 27,7
Grossweight ............................................................. kg
Grossweight .............................................................
13.400 kg 13.400
Dimensions Dimensions
Track radius, inner ...................................................
Track radius, inner ...................................................
mm 4.170 mm 4.170
Driving Characteristics
Driving Characteristics
3
Asphalt
Max. gradeability without/with
Max. vibr.
gradeability
..........................
without/with vibr.
% ..........................
40/35 % 40/35
0,136 Drive Drive
Deutz
0,167 Engine manufacturer ................................................
Engine manufacturer ................................................
Type .........................................................................
Deutz
Type .........................................................................
TCD 2012 L04 2V TCD 2012 L04 2V
Emission stage .........................................................
Emission stage .........................................................
Stage IIIa / TIER3 Stage IIIa / TIER3
Cooling .....................................................................
Cooling .....................................................................
Liquid Liquid
Number of cylinders .................................................
Number of cylinders .................................................
4 4
Performance ISO 14396 Performance ..........................................
ISO 14396 ..........................................
kW 100,0 kW 100,0
Speed ....................................................................... min-1
Speed .......................................................................
2.300 min-1 2.300
ng bow, Electric equipment ................................................... V
Electric equipment ...................................................
12 V 12
Brakes Brakes
dle Service brake ...........................................................
Service brake ...........................................................
hydrost. hydrost.
Dimensions in mm
e plate Parking brake ...........................................................
Parking brake ...........................................................
multi disc multi disc
w oil Steering H
Steering H1 H2 L L1 W
Steering system .......................................................
Steering system .......................................................
BP 10/35 658 962 700 1084 532oscil.artic. 350 oscil.artic.
Exciter system Exciter system
BP 12/40
Vibrating 658 drum 962 700 1084 542front400
drum ..........................................................
Vibrating .......................................................... front
Autom. vibr. shut off ................................................. standard
Autom. vibr. shut off ................................................. standard
Frequency ................................................................ Hz 40/50
Frequency ................................................................ Hz 40/50
Amplitude .................................................................
Technical Data Amplitude mm 0,69/0,29
................................................................. mm 0,69/0,29
Centrifugal force ....................................................... kN 126/84
Centrifugal force ....................................................... kN BOMAG
126/84 BOMAG
Oscillating drum ....................................................... rear
Oscillating drum ....................................................... rear 10/35
BP BP 12/40
O. Frequency ...........................................................
O. Frequency ...........................................................
Hz 35/43 Hz 35/43
O. Amplitude ............................................................
O. Amplitude ............................................................
mm 1,02/1,02 mm 1,02/1,02
Weights
Capacities weightCapacities
Operating CECE ........................................... kg 65 72
Fuel ..........................................................................
Fuel ..........................................................................
l 200,0 l 200,0
Basic weight .............................................................
Water .......................................................................
Water .......................................................................
l 1.000,0 kg
l 64
1.000,0 71
Technical modifications reserved. Machines
Technical
may be
modifications
shown with reserved.
options. Machines may be shown with options.
Dimensions
Working width .......................................................... mm 350 400
Driving Characteristics
Working speed, max. ............................................... m/min 25 25
Max. gradeability (dep. on soil con.) ........................ % 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
121
TANDEM ROLLER Standard Equipment
ASPHALT MANAGER 2
Opt
*R
BOMAG
Hellerwald
D-56154 Boppard
P.O. Box 5162
Tel. (0)6742 - 1000
Fax (0)6742 - 3090
Dimensions in mm
Dimensions
A inBmm C D H H2 K L O W
BW 203 AD-4 AM 3300
A2295 B715 C 1236 D 2320H 3000H2 350K 4610
L O
80
W
2135
BW 203 AD-4 AM 3300 2295 715 1236 2320 3000 350 4610 80 2135
122
TECHNICAL
Technical Data
DATA
Technical Data BOMAG BOMAG
BW 203 AD-4 AM BW 203 AD-4 AM
Weights Weights
Operating weight CECE w. Operating
ROPS-cabin weight ................. kg
CECE w. ROPS-cabin .................
13.400 kg 13.400
Axle load, front / rear CECE Axle..................................... kg 6.900/6.500 kg
load, front / rear CECE ..................................... 6.900/6.500
Static linear load, front / rear
StaticCECElinear.........................
load, front / rear CECE kg/cm 32,3/30,4 kg/cm
......................... 32,3/30,4
Grossweight ............................................................. kg
Grossweight .............................................................
14.000 kg 14.000
Dimensions Dimensions
Track radius, inner ...................................................
Track radius, inner ...................................................
mm 4.170 mm 4.170
Shell thickness, front / rearShell
......................................
thickness, front / rear ......................................
mm 27,0/27,0 mm 27,0/27,0
Driving Characteristics
Driving Characteristics
Speed (1) .................................................................
Speed (1) .................................................................
km/h 0- 5,7 km/h 0- 5,7
3
Asphalt
Speed (2) .................................................................
Speed (2) .................................................................
km/h 0- 11,0 km/h 0- 11,0
0,136 Max. gradeability without/with Max. vibr.
gradeability
..........................
without/with vibr.
% ..........................
40/35 % 40/35
123
TANDEM ROLLER Standard Equipment
2 amplitudes / 2 frequencies
Opti
*R
BOMAG
Hellerwald
D-56154 Boppard
P.O. Box 5162
Tel. (0)6742 - 1000
Fax (0)6742 - 3090
Dimensions in mm
Dimensions
A Bin mmC D H H2 K L O S W
BW 205 AD-4 3300 A
2295 B
715 C
1236 D
2320 H
3000 H2
350 K4610 L 80 O 32 S 2135
W
BW 205 AD-4 3300 2295 715 1236 2320 3000 350 4610 80 32 2135
124
TECHNICAL
Technical Data
DATA
Technical Data BOMAG BOMAG
BW 205 AD-4 BW 205 AD-4
Weights Weights
Operating weight CECE w. Operating
ROPS-cabin weight .................
CECE w. ROPS-cabin
kg .................
14.800 kg 14.800
Axle load, front CECE ..............................................
Axle load, front CECE ..............................................
kg 7.400 kg 7.400
Axle load, rear CECE ...............................................
Axle load, rear CECE ...............................................
kg 7.400 kg 7.400
Static linear load, front CECE Static..................................
linear load, front CECE ..................................
kg/cm 34,7 kg/cm 34,7
Static linear load, rear CECE Static...................................
linear load, rear CECE ...................................
kg/cm 34,7 kg/cm 34,7
Grossweight .............................................................
Grossweight .............................................................
kg 15.600 kg 15.600
Dimensions Dimensions
Track radius, inner ...................................................
Track radius, inner ...................................................
mm 4.170 mm 4.170
Driving Characteristics
Driving Characteristics
3
Asphalt
Speed (1) .................................................................
Speed (1) .................................................................
km/h 0- 5,7 km/h 0- 5,7
0,136 Speed (2) .................................................................
Speed (2) .................................................................
km/h 0- 11,0 km/h 0- 11,0
Max. gradeability without/with Max. vibr.
gradeability
..........................
without/with vibr.
% ..........................
30/25 % 30/25
0,167
Drive Drive
Engine manufacturer ................................................
Engine manufacturer ................................................
Deutz Deutz
Type .........................................................................
Type .........................................................................
TCD 2012 L04 2V TCD 2012 L04 2V
Emission stage .........................................................
Emission stage .........................................................
Stage IIIa / TIER3 Stage IIIa / TIER3
Cooling .....................................................................
Cooling .....................................................................
Liquid Liquid
Number of cylinders .................................................
Number of cylinders .................................................
4 4
ng bow, Performance ISO 14396 Performance ..........................................
ISO 14396 ..........................................
kW 100,0 kW 100,0
Speed .......................................................................
Speed .......................................................................
min-1 2.300 min-1 2.300
Electric equipment ...................................................
Electric equipment ...................................................
V 12 V 12
dle
Dimensions in mm
e plate Brakes Brakes
Service brake ...........................................................
Service brake ...........................................................
w oil H H1 H2 L L1 hydrost. W hydrost.
Parking brake ...........................................................
Parking brake ...........................................................
multi disc multi disc
BP 10/35 658 962 700 1084 532 350
Steering Steering
BP 12/40
Steering 658system 962.......................................................
700 1084 542oscil.artic.
system .......................................................
Steering 400 oscil.artic.
Lateral displacement right/left
Lateral..................................
displacement right/left ..................................
mm 170 mm 170
Steering / oscillating angle
Steering
+/- ..................................
/ oscillating angle +/- ..................................
grad 30/6 grad 30/6
Exciter system
Technical Data Exciter system
Vibrating drum .......................................................... front + rear
Vibrating drum .......................................................... BOMAG
front + rear BOMAG
Autom. vibr. shut off ................................................. standard
Autom. vibr. shut off ................................................. standard
Frequency ................................................................
Frequency ................................................................
Hz 40/50 Hz BP
40/5010/35 BP 12/40
Amplitude .................................................................
Amplitude .................................................................
mm 0,60/0,25 mm 0,60/0,25
Weights
Centrifugal force ....................................................... 126/84
Centrifugal force .......................................................
kN kN 126/84
Operating
Centrifugal forceweight CECEforce ...........................................
.......................................................
Centrifugal .......................................................
t 12,8/8,6 tkg 65
12,8/8,6 72
Basic weight .............................................................
Capacities Capacities kg 64 71
Fuel ..........................................................................
Fuel ..........................................................................
l 200,0 l 200,0
Dimensions
Water .......................................................................
Water .......................................................................
l 1.000,0 l 1.000,0
Working width
Technical modifications ..........................................................
reserved. Machines
Technical
may be
modifications
shown with reserved.
options. Machines may be shown with options. mm 350 400
Driving Characteristics
Working speed, max. ............................................... m/min 25 25
Max. gradeability (dep. on soil con.) ........................ % 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
125
COMBINATION ROLLER Standard Equipment
Four smooth rear rubber wheels
Opti
RO
Fields of application: 2 scrapers per drum, spring loaded and Double travel lever
tiltable Seat heating
Compaction of asphalt layers and wear courses on small and con-
Pressure sprinkler system with interval ECONOMIZER with asphalt temperature
fined construction projects. Due to the excellent
switch sealing of the sur- display
face and the good adapting abilities of the rubber tirestravel
Multi function to marginal
lever Temperature display
Multi-function display incl. operating hour BOMAG TELEMATIC
areas and joints the machine is particularlymeter
suitable for walkways Electronic fuel gauge
and cycle paths, parking lots and all types Water
of repair
level works. Theft protection
Emergency STOP Indicator and hazard lights
Dimensions in mm
Dimensions inAmm B C D H H2 K L O S W
BW 90 AC-5
A1483 B956 C 433 D 580 H 1627H2 2304
K 255
L O
2194 28
S W
12 900
BW 90 AC-5 1483 956 433 580 1627 2304 255 2194 28 12 900
126
TECHNICAL
Technical Data
DATA
Technical Data BOMAG BOMAG
BW 90 AC-5 BW 90 AC-5
Weights Weights
Operating weight CECE ........................................... kg
Operating weight CECE ...........................................
1.570 kg 1.570
Axle load, drum / wheels Axle CECE load, drum / wheels CECEkg
............................... ...............................
740/830 kg 740/830
Wheel load CECE .................................................... kg
Wheel load CECE ....................................................
208 kg 208
Static linear load, front CECE Static.................................. kg/cm
linear load, front CECE ..................................
8,2 kg/cm 8,2
Grossweight ............................................................. kg
Grossweight .............................................................
1.900 kg 1.900
Dimensions Dimensions
Working width ..........................................................
Working width ..........................................................
mm 900 mm 900
Track radius, inner ...................................................
Track radius, inner ...................................................
mm 2.030 mm 2.030
Driving Characteristics
Driving Characteristics
3
Asphalt
Speed ....................................................................... km/h
Speed .......................................................................
0- 10,0 km/h 0- 10,0
0,136 Working speed with vibration Working ................................... km/h
speed with vibration ...................................
0- 10,0 km/h 0- 10,0
Max. gradeability without/with Max. vibr.
gradeability
.......................... % ..........................
without/with vibr. 40/30 % 40/30
0,167
Drive Drive
Engine manufacturer ................................................
Engine manufacturer ................................................ Kubota Kubota
Type .........................................................................
Type .........................................................................
D 902 D 902
Emission stage .........................................................
Emission stage .........................................................
Stage V / TIER4f Stage V / TIER4f
Cooling .....................................................................
Cooling .....................................................................
water water
Number of cylinders .................................................
Number of cylinders ................................................. 3 3
ng bow, Performance ISO 14396 Performance .......................................... kW
ISO 14396 ..........................................
15,1 kW 15,1
Performance SAE J 1995Performance ........................................ hp
SAE J 1995 ........................................
20,2 hp 20,2
dle Speed ....................................................................... min-1
Speed .......................................................................
3.000 min-1 3.000
Dimensions
Speed adjustment 1in mm
................................................. min-1
Speed adjustment 1 ................................................. 2.100 min-1 2.100
e plate Speed adjustment 2 ................................................. min-1
Speed adjustment 2 ................................................. 3.000 min-1 3.000
w oil H H1 H2 LV
Electric equipment ...................................................
L1 12 W
Electric equipment ................................................... V 12
BP 10/35
Driven drum Driven 658 962 700 1084 532 350
.............................................................
drum .............................................................
front front
Driven wheels ..........................................................
Driven wheels ..........................................................
4 4
BP 12/40 658 962 700 1084 542 400
Drums and Tyres Drums and Tyres
Tyre size ..................................................................
Tyre size ..................................................................
190/60-15 190/60-15
Brakes Brakes
Technical Data Service brake ...........................................................
Service brake ........................................................... hydrost. hydrost.
BOMAG BOMAG
Parking brake ...........................................................
Parking brake ...........................................................
hydromec. hydromec.
Steering Steering
BP 10/35 BP 12/40
Steering system .......................................................
Steering system .......................................................
oscil.artic. oscil.artic.
Weights
Steering method .......................................................
Steering method .......................................................
hydrost. hydrost.
Operating weight
Steering / oscillating angle CECE
Steering ...........................................
+/- ..................................
/ oscillating angle +/- ..................................
grad 33/8 kg
grad 65
33/8 72
Basic
Crab walkweight .............................................................
.................................................................
Crab walk .................................................................
0- 50 kg 64
0- 50 71
Exciter system Exciter system
Dimensions
Vibrating drum ..........................................................
Vibrating drum ..........................................................
front front
Working
Drive system width ..........................................................
............................................................
Drive system ............................................................
hydrost. mm 350
hydrost. 400
Frequency ................................................................ Hz
Frequency ................................................................
42/63 Hz 42/63
Driving Characteristics
Amplitude ................................................................. mm
Amplitude .................................................................
0,50 mm 0,50
Centrifugal force .......................................................
Centrifugal force
Working speed, max. ............................................... kN
.......................................................
8/17 kN
m/min 8/17
25 25
Max. gradeability
Sprinkler (dep. onSystem
System Sprinkler soil con.) ........................ % 30 30
Type of sprinkling .....................................................
Type of sprinkling .....................................................
pressure pressure
Drive
Capacities Capacities
Engine manufacturer ................................................
Fuel .......................................................................... 30,0
Fuel ..........................................................................
l l Honda
30,0 Honda
Type .........................................................................
Water ....................................................................... 100,0
Water .......................................................................
l l GX 120
100,0 GX 120
Emission Emulsion ..................................................................
Emulsion ..................................................................
stage .........................................................l 11,0 l 11,0
StageV/CARB P.3 StageV/CARB P.3
Technical modifications reserved. Machines
Technical
may be
modifications
shown with reserved.
options. Machines may be shown with options.
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
127
COMBINATION ROLLERS Standard Equipment
Four smooth rear rubber wheels
Opti
RO
Fields of application: 2 scrapers per drum, spring loaded and Double travel lever
tiltable Seat heating
Compaction of asphalt layers and wear courses on small and con-
Pressure sprinkler system with interval ECONOMIZER with asphalt temperature
fined construction projects. Due to the excellent
switch sealing of the sur- display (BW100ACM)
face and the good adapting abilities of the rubber tirestravel
Multi function to marginal
lever Temperature display
Multi-function display incl. operating hour BOMAG TELEMATIC
areas and joints the machine is particularlymeter
suitable for walkways Electronic fuel gauge
and cycle paths, parking lots and all types Water
of repair
level works. Theft protection
Emergency STOP Indicator and hazard lights
128
TECHNICAL
Technical Data
DATA
Technical
Technical
Data Data BOMAG BOMAG
BOMAG
BOMAG BOMAG BOMAG
BW 100 ACM-5 BWBW
100
100
BWACM-5
SCC-5
100 ACM-5BW 100BW
SCC-5
100 SCC-5
Weights Weights
Weights
Operating weight CECE ...........................................
OperatingOperating
weight CECE weight kg ...........................................
...........................................
CECE 1.600 kg kg 1.600
1.650 1.600 1.650 1.650
Axle load, drum / wheels Axle CECE load,
...............................
Axle
drum load,
/ wheels
drum CECE/ wheels kg
...............................
CECE ...............................
770/830 kg kg 770/830 770/830
775/875 775/875 775/875
Wheel load CECE ....................................................
Wheel load Wheel
CECE load kg
....................................................
CECE ....................................................
208 kg kg 208219 208 219 219
Static linear load, front CECE Static..................................
linear
Static
load,linear
frontload,
CECE front kg/cm
..................................
CECE ..................................
7,7 kg/cm 7,77,8 7,7
kg/cm 7,8 7,8
Grossweight .............................................................
Grossweight Grossweight kg
.............................................................
.............................................................
1.900 kg kg 1.900
1.900 1.900 1.900 1.900
Dimensions Dimensions
Dimensions
Working width ..........................................................
Working width Working ..........................................................
width ..........................................................
mm 1.000 mm mm1.000
1.000 1.000 1.000 1.000
Track radius, inner ...................................................
Track radius, Trackinnerradius,
...................................................
inner ...................................................
mm 1.980 mm mm1.980
1.980 1.980 1.980 1.980
Driving Characteristics
DrivingDriving
Characteristics
Characteristics
3
Asphalt
Speed ....................................................................... km/h
Speed ....................................................................... km/h
Speed .......................................................................
0- 10,0 km/h
0- 10,0
0- 10,00- 10,0 0- 10,0 0- 10,0
0,136 Working speed with vibration Working ...................................
speed
Working withspeed
vibration
with vibration
...................................
km/h ...................................
0- 10,0 km/h 0- 10,0
km/h 0- 10,00- 10,0 0- 10,0 0- 10,0
Max. gradeability without/with Max. vibr.
gradeability
Max.
..........................
gradeability
without/with without/with
vibr.
% ..........................
vibr. 40/30
..........................
% % 40/30
40/30 40/30 40/30 40/30
0,167
Drive Drive Drive
Engine manufacturer ................................................
Engine manufacturer
Engine manufacturer ................................................
................................................
Kubota Kubota
Kubota Kubota Kubota Kubota
Type .........................................................................
Type .........................................................................
Type .........................................................................
D 902 D 902
D 902D 902 D 902 D 902
Emission stage .........................................................
EmissionEmissionstage .........................................................
stage .........................................................
Stage V / TIER4f Stage V /Stage
Stage VTIER4fV / TIER4f
/ TIER4f Stage V /Stage
TIER4fV / TIER4f
Cooling .....................................................................
Cooling .....................................................................
Cooling .....................................................................
water water
water water water water
Number of cylinders .................................................
Number of Number
cylinders of cylinders
.................................................
.................................................
3 3 3 3 3 3
ng bow, Performance ISO 14396 Performance ..........................................
Performance
ISO 14396 ISO kW..........................................
..........................................
14396 15,1 kW kW 15,115,1 15,1 15,1 15,1
Performance SAE J 1995Performance ........................................
Performance
SAE J 1995 hp ........................................
SAE........................................
J 1995 20,2 hp hp 20,220,2 20,2 20,2 20,2
Speed ....................................................................... min-1
Speed ....................................................................... min-1
Speed .......................................................................
3.000 3.000
min-1 3.000 3.000 3.000 3.000
dle
Dimensions
Speed adjustment 1 in mm
.................................................
Speed adjustment
Speed adjustment min-1
1 ................................................. min-1
1 .................................................
2.100 2.100
min-1 2.100 2.100 2.100 2.100
e plate Speed adjustment 2 .................................................
Speed adjustment
Speed adjustment min-1
2 ................................................. min-1
2 .................................................
3.000 3.000
min-1 3.000 3.000 3.000 3.000
w oil H Electric H1equipment
Electric equipment ...................................................
Electric equipment
H2 ...................................................
LV L1 12 W
................................................... V V 12 12 12 12 12
BP 10/35
Driven drum Driven 658 962 700 1084 532 350
.............................................................
drumDriven.............................................................
drum .............................................................
front front
front front front front
Driven wheels ..........................................................
Driven wheels Driven..........................................................
wheels ..........................................................
4 4 4 4 4 4
BP 12/40 658 962 700 1084 542 400
Drums and Tyres Drums Drums
and Tyres
and Tyres
Tyre size ..................................................................
Tyre sizeTyre ..................................................................
size ..................................................................
205/60-15 205/60-15
205/60-15
205/60-15 205/60-15205/60-15
Brakes BrakesBrakes
Technical Data Service brake
Service brake ...........................................................
Service ...........................................................
brake ...........................................................
hydrost. hydrost.
hydrost.
BOMAG hydrost. hydrost.
BOMAG hydrost.
Parking brake ...........................................................
Parking brake Parking ...........................................................
brake ...........................................................
hydromec. hydromec.
hydromec.
hydromec. hydromec.hydromec.
Steering Steering
Steering
BP 10/35 BP 12/40
Steering system .......................................................
Steering systemSteering.......................................................
system .......................................................
oscil.artic. oscil.artic.
oscil.artic.
oscil.artic. oscil.artic.oscil.artic.
Weights
Steering method .......................................................
Steering methodSteering.......................................................
method .......................................................
hydrost. hydrost.
hydrost.hydrost. hydrost. hydrost.
Operating weight
Steering / oscillating angle CECE
Steering ...........................................
+/- ..................................
/Steering
oscillating / oscillating
angle +/- angle.................................. kg
grad +/- ..................................
33/8 grad 65
grad33/8
33/8 33/8 72 33/8
33/8
Basic
Crab walkweight .............................................................
.................................................................
Crab walkCrab ................................................................. kg
walk .................................................................
0- 50 64
0- 50
0- 50 0- 50 0-71
50 0- 50
Exciter system ExciterExciter systemsystem
Dimensions
Vibrating drum ..........................................................
Vibrating Vibrating front
drum ..........................................................
drum .......................................................... front
front front front front
Working
Drive system width ..........................................................
............................................................
Drive system hydrost.
Drive............................................................ mm
system ............................................................ 350
hydrost. hydrost.
hydrost. 400
hydrost. hydrost.
Frequency ................................................................
Frequency Frequency Hz 42/63
................................................................ Hz
................................................................ Hz 42/63
42/63 42/63 42/63 42/63
Driving Characteristics
Amplitude .................................................................
AmplitudeAmplitude mm 0,40
................................................................. mm
................................................................. mm0,400,40 0,40 0,40 0,40
Centrifugal force
Working speed,.......................................................
Centrifugal
max. Centrifugal kN
force .......................................................
force .......................................................
............................................... 8/17 kN
m/min 8/17
kN 25 8/19 8/17 8/19
25 8/19
Max. gradeability
Sprinkler System Sprinkler (dep.SprinkleronSystemsoil con.) System ........................ % 30 30
Type of sprinkling .....................................................
Type of sprinkling
Type of sprinkling
.....................................................
.....................................................
pressure pressure
pressure
pressure pressure pressure
Drive
Capacities Capacities Capacities
Engine manufacturer ................................................
Fuel .......................................................................... 30,0
Fuel .......................................................................... l
Fuel ..........................................................................
l l Honda
30,0
30,0 30,0 Honda
30,0 30,0
Type .........................................................................
Water .......................................................................
Water 100,0
....................................................................... l
Water .......................................................................
l l GX 120100,0
100,0
100,0 GX
100,0 120
100,0
Emission EmulsionEmulsion..................................................................
..................................................................
Emulsion ..................................................................
stage ......................................................... l 11,0 l l 11,0
11,0 11,0
StageV/CARB P.3 11,0 11,0
StageV/CARB P.3
Technical modifications reserved. Machines
Technical
may be
modifications
shown
Technical
with reserved.
options.
modifications
Machines
reserved.
mayMachines
be shownmay
with be
options.
shown with options.
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
129
COMBINATION ROLLERS Standard Equipment
Four smooth rear rubber wheels
Opti
*F
130
TECHNICAL
Technical Data
DATA
Technical
Technical
Data Data BOMAG BOMAG
BOMAG
BOMAG BOMAG BOMAG
BW 100 AC-5 BW 100
BW 120
BWAC-5
AC-5
100 AC-5 BW 120BW
AC-5
120 AC-5
Weights Weights
Weights
Operating weight w. ROPS Operating
CECEOperating
...........................
weight w.weight ROPSw. CECE kg ...........................
ROPS kg
CECE ...........................
2.350 2.4502.350
kg 2.350 2.450 2.450
Axle load, drum CECE .............................................
Axle load,Axle drum load,
CECE drum CECEkg
............................................. kg
.............................................
1.150 1.2001.150
kg 1.150 1.200 1.200
Axle load, wheels CECE Axle ..........................................
load,Axle
wheelsload,CECEwheels ..........................................
CECE kg ..........................................
1.200 kg kg 1.200
1.2501.200 1.250 1.250
Wheel load CECE ....................................................
Wheel load WheelCECE load kg
.................................................... kg
CECE ....................................................
300 kg 300313 300 313 313
Static linear load, front CECE Static..................................
linear
Static
load,linear
frontload,
CECE front kg/cm
..................................
CECE ..................................
11,5 kg/cm kg/cm 10,0 11,5
11,5 10,0 10,0
Grossweight .............................................................
Grossweight Grossweight kg
.............................................................
.............................................................
3.150 kg kg 3.150
3.2503.150 3.250 3.250
Dimensions Dimensions
Dimensions
Working width ..........................................................
Working Working
width ..........................................................
width ..........................................................
mm 1.000 mm mm1.000
1.2001.000 1.200 1.200
Track radius, inner ...................................................
Track radius, Trackinnerradius,...................................................
inner ...................................................
mm 2.550 mm mm2.550
2.4502.550 2.450 2.450
3
Asphalt
Driving Characteristics
DrivingDriving
Characteristics
Characteristics
0,136 Speed .......................................................................
Speed .......................................................................
Speed .......................................................................
km/h 0- 10,0 km/h km/h
0- 10,0 0- 10,0
0- 10,0 0- 10,0 0- 10,0
Working speed with vibration Working ...................................
Working
speed with speed
vibration
with vibration
...................................
km/h ...................................
0- 10,0 km/h km/h
0- 10,0 0- 10,0
0- 10,0 0- 10,0 0- 10,0
0,167 Max. gradeability without/with Max. vibr.
gradeability
Max.
..........................
gradeability
without/with % ..........................
without/with
vibr. vibr. 40/30 %
.......................... 40/3040/30
% 40/30 40/30 40/30
Drive Drive Drive
Engine manufacturer ................................................
Engine manufacturer
Engine manufacturer ................................................
................................................
Kubota Kubota
Kubota Kubota Kubota Kubota
Type .........................................................................
Type .........................................................................
Type .........................................................................
D 1703 D 1703
D 1703 D 1703 D 1703 D 1703
Emission stage .........................................................
EmissionEmissionstage .........................................................
stage .........................................................
Stage IIIa / TIER4i Stage IIIaStage
Stage IIIa IIIa / TIER4i
/ TIER4i
/ TIER4i Stage IIIaStage IIIa / TIER4i
/ TIER4i
Cooling .....................................................................
Cooling .....................................................................
Cooling .....................................................................
water water water
water water water
ng bow, Number of cylinders .................................................
Number of Number
cylinders of cylinders
.................................................
.................................................
3 3 3 3 3 3
Performance ISO 14396 Performance ..........................................
Performance
ISO 14396 ISO kW..........................................
..........................................
14396 24,3 kW kW 24,3 24,3 24,3 24,3 24,3
dle Performance SAE J 1995Performance ........................................
Performance
SAE J 1995 hp ........................................
SAE........................................
J 1995 32,6 hp hp 32,6 32,6 32,6 32,6 32,6
Dimensions in mm
Speed ....................................................................... min-1
Speed ....................................................................... min-1
Speed .......................................................................
2.600 min-1 2.6002.600
2.600 2.600 2.600
e plate Speed adjustment 1 .................................................
Speed adjustment
Speed adjustment min-1
1 ................................................. min-1
1 .................................................
2.500 min-1 2.5002.500
2.500 2.500 2.500
w oil H H1
Speed adjustment 2 .................................................
Speed adjustment
Speed adjustment
H2 L min-1
L1 W
2 ................................................. min-1
2 .................................................
2.600 min-1 2.6002.600
2.600 2.600 2.600
BP 10/35
Electric equipment 658 962 700 1084 532 350 V
...................................................
Electric equipment
Electric equipment V
...................................................
...................................................
12 V 12 12 12 12 12
Driven drum .............................................................
Driven drum Driven .............................................................
drum .............................................................
standard standard
standard standard standardstandard
BP 12/40
Driven 658 962 700
wheels ..........................................................
Driven wheels
Driven 1084 542 4 400
..........................................................
wheels .......................................................... 4 4 4 4 4
Drums and Tyres DrumsDrums
and Tyres
and Tyres
Tyre size ..................................................................
Tyre sizeTyre ..................................................................
size ..................................................................
205/60-15 205/60-15
9.5/65-15
205/60-15 9.5/65-159.5/65-15
Technical
Brakes Data BrakesBrakes BOMAG BOMAG
Service brake ...........................................................
Service brake Service ...........................................................
brake ...........................................................
hydrost. hydrost.
hydrost.
hydrost. hydrost. hydrost.
Parking brake ...........................................................
Parking brake Parking ...........................................................
brake ...........................................................
hydromec. BP 10/35
hydromec.
hydromec.
hydromec. BP 12/40
hydromec.hydromec.
Steering Steering
Steering
Weights
Steering system .......................................................
Steering Steering
system .......................................................
system .......................................................
oscil.artic. oscil.artic.
oscil.artic.
oscil.artic. oscil.artic.
oscil.artic.
Operating
Steering methodweight CECE ...........................................
.......................................................
Steering Steering
method ....................................................... kg
method .......................................................
hydrost. 65 hydrost.
hydrost. hydrost. 72 hydrost.
hydrost.
Basic
Steering weight
/ oscillating.............................................................
angle Steering
+/- ..................................
Steering
/ oscillating / oscillating
angle +/-angle .................................. kg
grad +/- ..................................
32/10 grad 64
grad 32/1032/10
32/10 71 32/10
32/10
Crab walk .................................................................
Crab walk Crab
.................................................................
walk .................................................................
50 500- 50 50 0- 50 0- 50
Dimensions
Exciter system ExciterExciter systemsystem
Working width
Vibrating drum ..........................................................
..........................................................
VibratingVibrating
drum .......................................................... mm
drum ..........................................................
front 350 front front
front 400
front front
Drive system ............................................................
Drive system Drive............................................................
system ............................................................
hydrost. hydrost.
hydrost.
hydrost. hydrost. hydrost.
Driving Characteristics
Frequency ................................................................
Frequency Frequency Hz
................................................................ Hz
................................................................
63/67 Hz 63/67
63/6763/67 63/67 63/67
Working speed, max. ............................................... m/min 25
Amplitude .................................................................
Amplitude Amplitude mm
.................................................................
.................................................................
0,50 mm mm 0,500,50 0,50 25
0,50 0,50
Centrifugal force .......................................................
Centrifugal Centrifugal kN
force .......................................................
force .......................................................
30/34 kN kN 30/34
36/4130/34 36/41 36/41
Max. gradeability (dep. on soil con.) ........................ % 30 30
Sprinkler System Sprinkler
Sprinkler
SystemSystem
Drive
Type of sprinkling .....................................................
Type of sprinkling
Type of sprinkling.....................................................
.....................................................
pressure pressure
pressure
pressure pressurepressure
Engine
Capacities manufacturer Capacities ................................................
Capacities Honda Honda
Type .........................................................................
Fuel ..........................................................................
Fuel .......................................................................... l
Fuel ..........................................................................
l 35,0 l GX 12035,0
35,0
35,0 GX
35,0 120
35,0
Water .......................................................................
Emission stage ......................................................... 160,0
Water .......................................................................
Water .......................................................................
l l l 160,0160,0
160,0
StageV/CARB P.3 160,0 160,0
StageV/CARB P.3
EmulsionEmulsion
..................................................................
..................................................................
Emulsion .................................................................. l 45,0 l l 45,0 45,0
45,0 45,0 45,0
Cooling .....................................................................
Technical modifications reserved. Machines
Technical
may be
modifications
shown
Technical
with reserved.
modifications
options. Machines
reserved.
mayMachines
be shownmaywithbe
options.
shown with options.
air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
131
COMBINATION ROLLERS Standard Equipment
Four smooth rear rubber wheels
Opti
*F
technology
Dimensions in mm
Dimensions in * Standard delivery with CE conformity
A mm B C D H H2 K L O S W
(valid within European Union)
BW 100 AC-5 A
1752 B
1072 C523 D 700 H 1808H2 2568
K L
254 O
2529 S
36 W13 1000
BWBW
120 AC-5
100 AC-5 1752
1752 1272
1072 523
523 700700 18081808
2568 2568
254 254
2529 2529
36 36
13 13
1000 1200
BW 120 AC-5 1752 1272 523 700 1808 2568 254 2529 36 13 1200
132
TECHNICAL
Technical Data
DATA
Technical
Technical
Data Data BOMAG BOMAG
BOMAG
BOMAG BOMAG BOMAG
BW 100 AC-5 BWBW
100
120
BWAC-5
AC-5
100 AC-5 BW 120BW
AC-5
120 AC-5
Weights Weights
Weights
Operating weight w. ROPS Operating
CECE Operating
...........................
weight w.weight ROPSw. CECE kg ...........................
ROPS kg
CECE ...........................
2.400 kg 2.400
2.450 2.400 2.450 2.450
Axle load, drum / wheels Axle CECE load,
...............................
Axle
drum load,
/ wheels
drum CECE / wheels kg 1.150/1.250 kg
...............................
CECE ............................... kg 1.150/1.250
1.150/1.250
1.200/1.250 1.200/1.250
1.200/1.250
Wheel load CECE ....................................................
Wheel load WheelCECE load kg
....................................................
CECE ....................................................
313 kg kg 313313 313 313 313
Static linear load, front CECE Static..................................
linear
Static
load, linear
frontload,
CECE front kg/cm
..................................
12,2 kg/cm
CECE .................................. 12,2
kg/cm 10,0 12,2 10,0 10,0
Grossweight .............................................................
Grossweight Grossweight kg
.............................................................
.............................................................
2.800 kg kg 2.800
2.950 2.800 2.950 2.950
Dimensions Dimensions
Dimensions
Working width ..........................................................
Working width Working ..........................................................
width ..........................................................
mm 1.000 mm mm1.000
1.200 1.000 1.200 1.200
Track radius, inner ...................................................
Track radius, Trackinnerradius,
...................................................
inner ...................................................
mm 2.550 mm mm2.550
2.450 2.550 2.450 2.450
Driving Characteristics
DrivingDriving
Characteristics
Characteristics
3
Asphalt
Speed ....................................................................... km/h
Speed ....................................................................... km/h
Speed .......................................................................
0- 10,0 km/h
0- 10,0
0- 10,00- 10,0 0- 10,0 0- 10,0
0,136 Working speed with vibration Working ...................................
speed
Working withspeed
vibration
with vibration
...................................
km/h ...................................
0- 10,0 km/h 0- 10,0
km/h 0- 10,00- 10,0 0- 10,0 0- 10,0
Max. gradeability without/with Max. vibr.
gradeability
Max.
..........................
gradeability
without/with without/with
vibr.
% ..........................
vibr. 40/30
..........................
% % 40/30
40/30 40/30 40/30 40/30
0,167
Drive Drive Drive
Engine manufacturer ................................................
Engine manufacturer
Engine manufacturer ................................................
................................................
Kubota Kubota
Kubota Kubota Kubota Kubota
Type .........................................................................
Type .........................................................................
Type .........................................................................
D1803 D1803
D1803D1803 D1803 D1803
Emission stage .........................................................
EmissionEmissionstage .........................................................
stage .........................................................
Stage V / TIER4f Stage V /Stage
Stage TIER4f
V V / TIER4f
/ TIER4f Stage V /Stage
TIER4fV / TIER4f
Exhaust gas aftertreatment Exhaust
......................................
gas
Exhaust
aftertreatment
gas aftertreatment
......................................
......................................
DPF DPF DPF DPF DPF DPF
Cooling .....................................................................
Cooling .....................................................................
Cooling .....................................................................
water water
water water water water
ng bow, Number of cylinders .................................................
Number of Number
cylinders of cylinders
.................................................
.................................................
3 3 3 3 3 3
Performance ISO 14396 Performance ..........................................
Performance
ISO 14396 ISO kW..........................................
..........................................
14396 24,6 kW kW 24,624,6 24,6 24,6 24,6
dle Performance SAE J 1995Performance ........................................
Performance
SAE J 1995 hp ........................................
SAE........................................
J 1995 33,0 hp hp 33,033,0 33,0 33,0 33,0
Dimensions in mm
Speed ....................................................................... min-1
Speed ....................................................................... min-1
Speed .......................................................................
2.600 2.600
min-1 2.600 2.600 2.600 2.600
e plate Speed adjustment 1 .................................................
Speed adjustment
Speed adjustment min-1
1 ................................................. min-1
1 .................................................
2.500 2.500
min-1 2.500 2.500 2.500 2.500
w oil H Speed H1adjustment
Speed adjustment 2 .................................................
Speed adjustment
H2 2 .................................................
Lmin-1 L1 2.600 W
2 ................................................. min-1 2.600
min-1 2.600 2.600 2.600 2.600
BP 10/35
Electric equipment 658 962 700 1084 532 350 V
...................................................
Electric equipment
Electric equipment V
...................................................
...................................................
12 V 12 12 12 12 12
Driven drum .............................................................
Driven drum Driven.............................................................
drum .............................................................
standard standard standard
standard standard standard
BP 12/40
Driven 658 962 700
wheels ..........................................................
Driven wheels
Driven 1084 5424 400
..........................................................
wheels .......................................................... 4 4 4 4 4
Drums and Tyres Drums Drums
and Tyres
and Tyres
Tyre size ..................................................................
Tyre sizeTyre ..................................................................
size ..................................................................
205/60-15 205/60-15
9.5/65-15
205/60-15 9.5/65-159.5/65-15
Technical
Brakes Data BrakesBrakes BOMAG BOMAG
Service brake ...........................................................
Service brake Service ...........................................................
brake ...........................................................
hydrost. hydrost.
hydrost.
hydrost. hydrost. hydrost.
Parking brake ...........................................................
Parking brake Parking ...........................................................
brake ...........................................................
hydromec. BP 10/35
hydromec.
hydromec.
hydromec. BP 12/40
hydromec.hydromec.
Steering Steering
Steering
Weights
Steering system .......................................................
Steering system Steering.......................................................
system .......................................................
oscil.artic. oscil.artic.
oscil.artic.
oscil.artic. oscil.artic.oscil.artic.
Operating
Steering methodweight CECE
Steering ...........................................
.......................................................
method
Steering ....................................................... kg
method .......................................................
hydrost. 65hydrost.
hydrost. hydrost. 72 hydrost.
hydrost.
Basic
Steering /weight
oscillating.............................................................
angle Steering
+/- ..................................
/Steering
oscillating / oscillating
angle +/- angle.................................. kg
grad +/- ..................................
32/10 grad 64
grad32/10
32/10 32/10 71 32/10
32/10
Crab walk .................................................................
Crab walkCrab .................................................................
walk .................................................................
0- 50 0- 50
0- 50 0- 50 0- 50 0- 50
Dimensions
Exciter system ExciterExciter systemsystem
Working width
Vibrating drum ..........................................................
..........................................................
Vibrating Vibrating
drum .......................................................... mm
drum ..........................................................
front 350
front
front front 400
front front
Drive system ............................................................
Drive system Drive............................................................
system ............................................................
hydrost. hydrost. hydrost.
hydrost. hydrost. hydrost.
Driving Characteristics
Frequency ................................................................
Frequency Frequency Hz
................................................................ Hz
................................................................
63/67 Hz 63/67
63/67 63/67 63/67 63/67
Working speed, max. ............................................... m/min 25
Amplitude .................................................................
Amplitude Amplitude mm
.................................................................
.................................................................
0,50 mm mm 0,500,50 0,50 25
0,50 0,50
Centrifugal force .......................................................
Centrifugal Centrifugal kN
force ....................................................... kN
force .......................................................
30/34 kN 30/34
36/41 30/34 36/41 36/41
Max. gradeability (dep. on soil con.) ........................ % 30 30
Sprinkler System Sprinkler
Sprinkler
SystemSystem
Drive
Type of sprinkling .....................................................
Type of sprinkling
Type of sprinkling
.....................................................
.....................................................
pressure pressure
pressure
pressure pressure pressure
Engine
Capacities manufacturer Capacities ................................................
Capacities Honda Honda
Type .........................................................................
Fuel ..........................................................................
Fuel .......................................................................... l
Fuel ..........................................................................
l 35,0 l GX
35,0 12035,0
35,0 GX
35,0 120
35,0
Water .......................................................................
Emission Water .......................................................................
Water .......................................................................
stage ......................................................... l 160,0 l l 160,0
160,0 160,0
StageV/CARB P.3 160,0 160,0
StageV/CARB P.3
EmulsionEmulsion
..................................................................
Emulsion .................................................................. l
..................................................................
l 45,0 l 45,0
45,0 45,0 45,0 45,0
Cooling .....................................................................
Technical modifications reserved. Machines
Technical
may be
modifications
shown
Technical
with reserved.
options.
modifications
Machines
reserved.
mayMachines
be shownmaywith be
options.
shown with options.
air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
133
COMBINATION ROLLERS Standard Equipment
Hydrostatic drive
Opti
EC
BOMAG
Hellerwald
D-56154 Boppard
P.O. Box 5162
Tel. (0)6742 - 1000
Fax (0)6742 - 3090
Dimensions in mm
Dimensions in mm
A B C D H K L O S W
BW 115 AC-5
A
1950
B
1290
C
555
D
700 1684
H 270
K
2649 45
L 13
O S 1200
W
BW115
BW 131AC-5
ACW-5 2300
1950 1380
1290 625
555 800
700 1700
1684 250270 3100264940 45 15 13 1300 1200
BW 131 ACW-5 2300 1380 625 800 1700 250 3100 40 15 1300
134
TECHNICAL
Technical Data
DATA
Technical
Technical
Data Data BOMAG BOMAG
BOMAGBOMAG BOMAG BOMAG
BW 115 AC-5 BW
BW115
131
BW
AC-5
ACW-5
115 AC-5 BW 131BW
ACW-5
131 ACW-5
Weights Weights
Weights
Operating weight CECE ...........................................
OperatingOperating
weight CECE weight ...........................................
CECE kg ...........................................
2.600 kg 3.500 2.600
kg 2.600 3.500 3.500
Static linear load, front CECE Static..................................
linear
Staticload,linear
frontload,
CECE front..................................
kg/cm
CECE ..................................
11,7 kg/cm kg/cm 15,2 11,7
11,7 15,2 15,2
Max. weight ..............................................................
Max. weight Max. ..............................................................
weight ..............................................................
kg 2.800 kg 3.700 2.800
kg 2.800 3.700 3.700
Dimensions Dimensions
Dimensions
Track radius, inner ...................................................
Track radius, Trackinnerradius,
...................................................
inner ...................................................
mm 2.500 mm mm2.500
3.000 2.500 3.000 3.000
Driving Characteristics
DrivingDriving
Characteristics
Characteristics
Max. travel speed .....................................................
Max. travel Max.speedtravel.....................................................
speed .....................................................
km/h 0 - 12,0 km/h km/h
0 - 0-
12,0
12,00 - 12,0 0- 12,0 0- 12,0
Max. gradeability without/with
Max. vibr.
gradeability
Max.
..........................
gradeability
without/with without/with
vibr.
% ..........................
vibr.35/25
..........................
% % 35/2530/20 35/25 30/20 30/20
Asphalt
Engine manufacturer ................................................
Engine manufacturer
Engine manufacturer ................................................
................................................
Kubota KubotaKubota
Kubota Kubota Kubota
0,136 Type .........................................................................
Type .........................................................................
Type .........................................................................
D 1703 D 1703D 1703
D 1703 D 1703 D 1703
Emission stage .........................................................
EmissionEmissionstage .........................................................
stage .........................................................
Stage 3a/TIER4f/CN3 Stage Stage Stage 3a/TIER4f/CN3
IIIa / TIER4f/CN3
3a/TIER4f/CN3 Stage IIIaStage
/ TIER4f/CN3
IIIa / TIER4f/CN3
0,167 Cooling .....................................................................
Cooling .....................................................................
Cooling .....................................................................
water water water
water water water
Number of cylinders .................................................
Number of Number
cylinders of cylinders
.................................................
.................................................
3 3 3 3 3 3
Performance ISO 9249 ............................................
Performance Performance
ISO 9249ISO ............................................
9249 kW kW
............................................
18,5 18,5 18,5
kW 18,5 18,5 18,5
Performance SAE J 1995Performance ........................................
Performance
SAE J 1995 SAE........................................
J 1995 hp
hp ........................................
25,1 25,1 25,1
hp 25,1 25,1 25,1
Speed .......................................................................
Speed .......................................................................
Speed .......................................................................
min-1 2.200 min-1 min-1 2.200 2.200
2.200 2.200 2.200
Electric equipment ...................................................
Electric equipment
Electric equipment
...................................................
...................................................
V 12 V V 12 12 12 12 12
ng bow, Driven drum .............................................................
Driven drum Driven.............................................................
drum .............................................................
1 1 1 1 1 1
Driven wheels ..........................................................
Driven wheels 4
Driven..........................................................
wheels .......................................................... 4 4 4 4 4
dle Drums and Tyres Drums Drums and Tyres and Tyres
Dimensions in mm
e plate Tyre size ..................................................................
Tyre sizeTyre ..................................................................
size ..................................................................
9.5/65-15 9.5/65-15
10.5/80-16
9.5/65-15
6PR 10.5/80-16
10.5/80-16
6PR 6PR
w oil H NumberH1 tyres
tyres H2.......................................................
Number of tyres .......................................................
Number of L L1 4 W
.......................................................
of 4 4 4 4 4
Brakes
BP 10/35 Brakes
658Brakes
962 700 1084 532 350
Service brake ...........................................................
Service brake Service ...........................................................
brake ...........................................................
hydrost. hydrost.
hydrost.
hydrost. hydrost. hydrost.
BP 12/40
Parking 658brake
Parking 962
Parking 700
brake ........................................................... 1084 542hydromec. 400
...........................................................
brake ........................................................... hydromec.
hydromec.
hydromec. hydromec.hydromec.
Steering Steering
Steering
Steering system .......................................................
Steering system
Steering.......................................................
system .......................................................
oscil.artic. oscil.artic.
oscil.artic.
oscil.artic. oscil.artic.oscil.artic.
Technical
Steering method Data
.......................................................
Steering method
Steering.......................................................
method .......................................................
hydrost. hydrost.
hydrost.
BOMAG
hydrost. hydrost. hydrost.
BOMAG
Steering angle +/- .....................................................
Steering angleSteering +/- angle
.....................................................
+/- .....................................................
grad 35 grad grad35 35 35 35 35
Oscillating angle +/- .................................................
Oscillating Oscillating
angle +/- angle.................................................
+/- .................................................
grad 8 grad BP
grad8 810/35 8 BP
8 12/40 8
Exciter system ExciterExciter
systemsystem
Weights
Drive system ............................................................
Drive system hydrost.
Drive............................................................
system ............................................................ hydrost.
hydrost.
hydrost. hydrost. hydrost.
Frequency (1) ...........................................................
Operating weightFrequency CECE Frequency
(1) ...........................................................
(1) ...........................................................
Hz
........................................... 60 Hz
kg Hz 60 60
65 60 60
72 60
Amplitude (1) ............................................................
AmplitudeAmplitude 0,30
(1) ............................................................ mm
(1) ............................................................
mm mm0,300,30 0,30 0,30 0,30
Basic weight .............................................................
Centrifugal force 1 ....................................................
Centrifugal Centrifugal
force 1 ....................................................
kg
kN
force 1 ....................................................
kN 23
64
kN 23 28 23
71
28 28
Dimensions
Sprinkler System Sprinkler Sprinkler
SystemSystem
Type of sprinkling .....................................................
Type of sprinkling
Type of sprinkling
.....................................................
.....................................................
pressure pressure
pressure
pressure pressure pressure
Working width .......................................................... mm 350 400
Capacities Capacities
Capacities
Driving Characteristics
Fuel ..........................................................................
Fuel ..........................................................................
Fuel ..........................................................................
l 40,0 l l 40,0 40,0
40,0 40,0 40,0
Water ....................................................................... 200,0
Water ....................................................................... l
Water .......................................................................
l l 310,0 200,0
200,0 310,0 310,0
Working speed, max. ...............................................
Emulsion ..................................................................
EmulsionEmulsion..................................................................
m/min
l
..................................................................
l 10,0 l
25 10,0 10,0
10,0
25
10,0 10,0
Max. gradeabilityTechnical (dep.
Technical modifications reserved. Machines may be
on
modifications
shown
Technical
soil
with options.
reserved.
con.)
modifications
Machines
reserved.
........................
may Machines
be shown may
with be
options.
shown with options.
% 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
135
COMBINATION ROLLER Standard Equipment
Hydrostatic travel and vibration drive
Optiona
*Folda
136
TECHNICAL
Technical Data
DATA
Technical Data BOMAG BOMAG
BW 138 AC-5 BW 138 AC-5
Weights Weights
Operating weight w. ROPS Operating
CECE ...........................
weight w. ROPS CECE kg ...........................
4.150 kg 4.150
Axle load, drum / wheels Axle CECE load,
...............................
drum / wheels CECEkg 2.150/2.000 kg
............................... 2.150/2.000
Wheel load CECE ....................................................
Wheel load CECE ....................................................
kg 500 kg 500
Static linear load, front CECE Static..................................
linear load, front CECE ..................................
kg/cm 15,6 kg/cm 15,6
Grossweight .............................................................
Grossweight .............................................................
kg 4.300 kg 4.300
Dimensions Dimensions
Working width ..........................................................
Working width ..........................................................
mm 1.380 mm 1.380
Track radius, inner ...................................................
Track radius, inner ...................................................
mm 2.616 mm 2.616
Driving Characteristics
Driving Characteristics
3
Asphalt
Max. travel speed .....................................................
Max. travel speed .....................................................
km/h 0- 10,0 km/h 0- 10,0
0,136 Working speed with vibration Working...................................
speed with vibration ...................................
km/h 0- 10,0 km/h 0- 10,0
Max. gradeability without/with
Max. vibr.
gradeability
..........................
without/with vibr.
% ..........................
40/30 % 40/30
0,167
Drive Drive
Engine manufacturer ................................................
Engine manufacturer ................................................
Kubota Kubota
Type .........................................................................
Type .........................................................................
V 2203 V 2203
Emission stage .........................................................
Emission stage .........................................................
Stage IIIa / TIER4i Stage IIIa / TIER4i
Cooling .....................................................................
Cooling .....................................................................
water water
Number of cylinders .................................................
Number of cylinders .................................................
4 4
ng bow, Performance ISO 14396 ..........................................
Performance ISO 14396 ..........................................
kW 33,3 kW 33,3
Performance SAE J 1995Performance ........................................
SAE J 1995 ........................................
hp 44,7 hp 44,7
dle Speed .......................................................................
Speed .......................................................................
min-1 2.600 min-1 2.600
Dimensions
Speed adjustment 1 in mm
.................................................
Speed adjustment 1 .................................................
min-1 2.770 min-1 2.770
e plate Speed adjustment 2 .................................................
Speed adjustment 2 .................................................
min-1 2.140 min-1 2.140
w oil H H1
Electric equipment ...................................................
H2 L L1
Electric equipment ...................................................
V 12
W V 12
BP 10/35
Drums and Tyres Drums 658 and 962 Tyres 700 1084 532 350
Tyre size ..................................................................
Tyre size ..................................................................
BP 12/40 658 962 700 1084 54210.5/80-16 400 10.5/80-16
Number of tyres .......................................................
Number of tyres .......................................................
4 4
Brakes Brakes
Service brake ...........................................................
Service brake ...........................................................
hydrost. hydrost.
Technical Data Parking brake ...........................................................
Parking brake ........................................................... hydromec. BOMAG
hydromec. BOMAG
Steering Steering BP 10/35 BP 12/40
Steering system ....................................................... oscil.artic.
Steering system ....................................................... oscil.artic.
Steering method ....................................................... hydrost.
Steering method ....................................................... hydrost.
Weights
Steering / oscillating angle Steering
+/- .................................. 32/10
/ oscillating angle +/- ..................................
grad grad 32/10
Operating weight CECE ...........................................
Crab walk ................................................................. 0- 50
Crab walk ................................................................. kg 65
0- 50 72
Basic weight ............................................................. kg 64 71
Exciter system Exciter system
Vibrating drum ..........................................................
Vibrating drum ..........................................................
front front
Dimensions
Drive system ............................................................
Drive system ............................................................
hydrost. hydrost.
Working width ..........................................................
Frequency ................................................................
Frequency ................................................................
Hz 50/56 mm
Hz 350
50/56 400
Amplitude .................................................................
Amplitude .................................................................
mm 0,50 mm 0,50
Driving Characteristics
Centrifugal force .......................................................
Centrifugal force .......................................................
kN 45/57 kN 45/57
Working
Capacitiesspeed, max. Capacities ............................................... m/min 25 25
Max. gradeabilityFuel (dep. on soil con.) ........................
Fuel ..........................................................................
..........................................................................
l 55,0 %
l 30
55,0 30
Water ....................................................................... 260,0
Water .......................................................................
l l 260,0
Drive
Emulsion ..................................................................
Emulsion ..................................................................
l 50,0 l 50,0
Engine manufacturer
Technical modifications reserved. Machines
Technical
may be
................................................
modifications
shown with options.
reserved. Machines may be shown with options.
Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
137
COMBINATION ROLLER Standard Equipment
Hydrostatic travel and vibration drive
Optional
*Foldabl
138
TECHNICAL
Technical Data
DATA
Technical Data BOMAG BOMAG
BW 138 AC-5 BW 138 AC-5
Weights Weights
Operating weight w. ROPS Operating
CECE ...........................
weight w. ROPS CECE kg ...........................
4.150 kg 4.150
Axle load, drum / wheels Axle CECE load,
...............................
drum / wheels CECEkg 2.150/2.000 kg
............................... 2.150/2.000
Wheel load CECE ....................................................
Wheel load CECE ....................................................
kg 500 kg 500
Static linear load, front CECE Static..................................
linear load, front CECE ..................................
kg/cm 15,6 kg/cm 15,6
Grossweight .............................................................
Grossweight .............................................................
kg 4.300 kg 4.300
Dimensions Dimensions
Working width ..........................................................
Working width ..........................................................
mm 1.380 mm 1.380
Track radius, inner ...................................................
Track radius, inner ...................................................
mm 2.616 mm 2.616
Driving Characteristics
Driving Characteristics
3
Asphalt
Speed (1) .................................................................
Speed (1) .................................................................
km/h 5,0 km/h 5,0
0,136 Speed (2) .................................................................
Speed (2) .................................................................
km/h 10,0 km/h 10,0
Max. gradeability without/with Max. vibr.
gradeability
..........................
without/with vibr.
% ..........................
40/30 % 40/30
0,167
Drive Drive
Engine manufacturer ................................................
Engine manufacturer ................................................ Kubota Kubota
Type .........................................................................
Type .........................................................................
V2403 V2403
Emission stage .........................................................
Emission stage .........................................................
Stage V / TIER4f Stage V / TIER4f
Exhaust gas aftertreatment Exhaust
......................................
gas aftertreatment ......................................
DPF DPF
Cooling .....................................................................
Cooling .....................................................................
water water
ng bow, Number of cylinders .................................................
Number of cylinders ................................................. 4 4
Performance ISO 14396 ..........................................
Performance ISO 14396 ..........................................
kW 34,1 kW 34,1
dle Performance SAE J 1995Performance ........................................
SAE J 1995 ........................................
hp 45,7 hp 45,7
Dimensions in mm
Speed .......................................................................
Speed .......................................................................
min-1 2.400 min-1 2.400
e plate Speed adjustment 1 .................................................
Speed adjustment 1 .................................................
min-1 2.300 min-1 2.300
w oil H H1
Speed adjustment 2 .................................................
H2 L L1
Speed adjustment 2 .................................................
min-1 2.530
W min-1 2.530
BP 10/35
Electric equipment 658 962 700 1084 532 350 V
...................................................
Electric equipment ...................................................
V 12 12
Drums
BP and Tyres Drums
12/40 658 and Tyres
962 700 1084 542 400
Tyre size ..................................................................
Tyre size ..................................................................
10.5/80-16 10.5/80-16
Number of tyres .......................................................
Number of tyres .......................................................
4 4
Brakes
Technical Data Brakes
Service brake ...........................................................
Service brake ...........................................................
hydrost. BOMAG
hydrost. BOMAG
Parking brake ...........................................................
Parking brake ...........................................................
hydromec. hydromec.
BP 10/35 BP 12/40
Steering Steering
Steering system .......................................................
Steering system .......................................................
oscil.artic. oscil.artic.
Weights
Steering method .......................................................
Steering method .......................................................
hydrost. hydrost.
Operating weightSteering
Steering / oscillating angle
CECE ...........................................
+/- ..................................
/ oscillating angle +/- ..................................
grad 32/10
kg
grad
65
32/10
72
Basic weight .............................................................
Crab walk .................................................................
Crab walk .................................................................
0- 50 kg 64
0- 50 71
Exciter system
Dimensions Exciter system
Vibrating drum ..........................................................
Vibrating drum ..........................................................
front front
Working
Drive system width ..........................................................
............................................................
Drive system ............................................................
hydrost. mm 350
hydrost. 400
Frequency ................................................................
Frequency ................................................................
Hz 50/56 Hz 50/56
Driving Characteristics
Amplitude .................................................................
Amplitude .................................................................
mm 0,50 mm 0,50
Working speed,
Centrifugal force max. ...............................................
.......................................................
Centrifugal force .......................................................
kN 45/57 m/min
kN 25
45/57 25
Max. gradeabilityCapacities
Capacities (dep. on soil con.) ........................ % 30 30
Fuel .......................................................................... 55,0
Fuel ..........................................................................
l l 55,0
Drive
Water .......................................................................
Water .......................................................................
l 260,0 l 260,0
Engine manufacturer Emulsion ................................................
Emulsion .................................................................. 50,0
..................................................................
l l Honda
50,0 Honda
Type .........................................................................
Technical modifications reserved. Machines
Technical
may bemodifications
shown with options.
reserved. Machines may be shown with options.
GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
139
COMBINATION ROLLERS Standard Equipment
2 amplitudes / 2 frequencies
Opti
RO
Dimensions in mm
Dimensions in mm
A A BB CC D
D HH H2 H2K KL O
L SO W S W
BW 151 AC - 5 3300 1844 730 1100 2240 3000 250 4400 82 16 1680
BW 151 BW
AC161
- 5 AC-5330036201844
1836
730
670
1100 2315
1220
224030503000
250
250
4840
4400 1782
78
16
1680
1680
BW 161 AC-5 3620 1836 670 1220 2315 3050 250 4840 78 17 1680
140
TECHNICAL
Technical Data
DATA
Technical
Technical
Data Data BOMAG BOMAG
BOMAG
BOMAG BOMAG BOMAG
BW 151 AC - 5 BWBW 161
BW
151 ACAC-5
151
- 5 AC - 5BW 161BW
AC-5
161 AC-5
Weights Weights
Weights
Operating weight CECE w. Operating
ROPS-cabinOperating
weight .................
CECE
weight w.CECE kg w. ROPS-cabin
ROPS-cabin ................. kg
7.500 ................. 9.700 7.500
kg 7.500 9.700 9.700
Static linear load CECE ...........................................
Static linear Static
load linear
CECE load kg/cm
...........................................
CECE ...........................................
23,2 kg/cm kg/cm 30,4 23,2
23,2 30,4 30,4
Axle load, drum CECE .............................................
Axle load,Axle drum load,
CECE drum CECEkg
.............................................
.............................................
3.900 kg kg 3.900
5.100 3.900 5.100 5.100
Axle load, wheels CECE Axle ..........................................
load,Axle
wheels load,CECEwheels ..........................................
CECE kg ..........................................
3.600 kg kg 3.600
4.600 3.600 4.600 4.600
Wheel load CECE ....................................................
Wheel load WheelCECE load kg
.................................................... kg
CECE ....................................................
900 kg 9001.150 900 1.150 1.150
Grossweight .............................................................
Grossweight Grossweight kg
.............................................................
.............................................................
8.500 kg kg 8.500
11.2008.500 11.200 11.200
Dimensions Dimensions
Dimensions
Track radius, inner ...................................................
Track radius, Trackinnerradius,...................................................
inner ...................................................
mm 4.390 mm mm4.390
4.900 4.390 4.900 4.900
Length (without towing hitch)Length ...................................
(without
Lengthtowing(without hitch)
towing ...................................
mmhitch) ...................................
4.400 mm mm4.400
4.840 4.400 4.840 4.840
3
Asphalt
Driving Characteristics
DrivingDriving
Characteristics
Characteristics
0,136 Max. travel speed .....................................................
Max. travel Max.speed
travel .....................................................
speed .....................................................
km/h 0- 12,0 km/h km/h
0- 12,0
0- 12,00- 12,0 0- 12,0 0- 12,0
Max. gradeability without/with
Max. vibr.
gradeability
Max.
..........................
gradeability
without/with without/with
vibr.
% ..........................
vibr. 40/30
..........................
% % 40/30
35/30 40/30 35/30 35/30
0,167
Drive Drive Drive
Engine manufacturer ................................................
Engine manufacturer
Engine manufacturer ................................................
................................................
Kubota DeutzKubota
Kubota Deutz Deutz
Type .........................................................................
Type .........................................................................
Type .........................................................................
V3307 CR-T TCDCR-T
V3307 V3307
3.6 L4 CR-T TCD 3.6 L4
TCD 3.6 L4
Emission stage .........................................................
EmissionEmissionstage .........................................................
stage .........................................................
StageV / TIER4f Stage/ StageV
StageV TIER4f / TIER4f
IV / TIER4f Stage IV Stage
/ TIER4f
IV / TIER4f
Exhaust gas aftertreatment Exhaust
......................................
gas
Exhaust
aftertreatment
gas aftertreatment
......................................
......................................
DOC+DPF DOC+SCR
DOC+DPF DOC+DPF DOC+SCR DOC+SCR
Cooling .....................................................................
Cooling .....................................................................
Cooling .....................................................................
Liquid LiquidLiquid
Liquid Liquid Liquid
ng bow, Number of cylinders .................................................
Number of Number
cylinders of cylinders
.................................................
.................................................
4 4 4 4 4 4
Performance ISO 14396 Performance ..........................................
Performance
ISO 14396 ISO..........................................
14396 kW..........................................
55,4 kW kW 55,495,0 55,4 95,0 95,0
dle Performance SAE J 1995Performance ........................................
Performance
SAE J 1995 SAE........................................
J 1995hp ........................................
74,3 hp hp 74,3127,0 74,3 127,0 127,0
Dimensions in mm
Speed ....................................................................... min-1
Speed .......................................................................
Speed .......................................................................
2.400 min-1 min-1 2.300 2.400
2.400 2.300 2.300
e plate
w oil Brakes H Brakes
Brakes H1 H2 L L1 W
Service brake ...........................................................
Service brake Service ...........................................................
brake ...........................................................
hydrost. hydrost.
hydrost.
hydrost. hydrost. hydrost.
BP 10/35 658Parking 962 700 1084 532multi350
Parking brake ...........................................................
Parking brake ...........................................................
brake ...........................................................
disc multi
multi
discdisc
multi disc multi discmulti disc
BP 12/40
Steering 658Steering
Steering 962 700 1084 542 400
Steering system .......................................................
Steering system
Steering.......................................................
system .......................................................
oscil.artic. oscil.artic.
oscil.artic.
oscil.artic. oscil.artic.oscil.artic.
Exciter system ExciterExciter
systemsystem
Technical
Autom. vibr. shutData
off .................................................
Autom. vibr. Autom.shutvibr. standard
off .................................................
shut off ................................................. standard
BOMAG standard
standard standard standard
BOMAG
Frequency ................................................................
Frequency Frequency Hz 45/55
................................................................ Hz
................................................................ 40/53 45/55
Hz 45/55 40/53 40/53
Amplitude .................................................................
AmplitudeAmplitude mm 0,68/0,27 mm
.................................................................
................................................................. BP
mm 10/35
0,68/0,27 0,68/0,27
0,87/0,44 BP 12/40
0,87/0,440,87/0,44
Centrifugal force .......................................................
Centrifugal Centrifugal kN 69/41
force ....................................................... kN
force ....................................................... 95/90 69/41
kN 69/41 95/90 95/90
Centrifugal force .......................................................
Centrifugal Centrifugal t 7,0/4,2
force ....................................................... t
force ....................................................... 9,7/9,27,0/4,2
t 7,0/4,2 9,7/9,2 9,7/9,2
Weights
Operating
Capacities weightCapacities CECE ........................................... kg
Capacities 65 72
Fuel ..........................................................................
Fuel ..........................................................................
Fuel ..........................................................................
l 125,0 l l 125,0
145,0 125,0 145,0 145,0
Basic weight ............................................................. kg 64 71
Water .......................................................................
Water .......................................................................
Water .......................................................................
l 600,0 l l 600,0
750,0 600,0 750,0 750,0
Dimensions
Technical modifications reserved. Machines
Technical
may be
modifications
shown
Technical
with reserved.
options.
modifications
Machines
reserved.
mayMachines
be shownmay
with be
options.
shown with options.
141
COMBINATION ROLLERS Standard Equipment
ECOMODE
Opti
EC
Dimensions
Dimensions ininmm
mm
AA B B C C D DH1 H1
K LK O L S OW S W
BW
BW154
154 ACP-4V 2890 1665
ACP-4V 2890 1665735 735
1100 1100
2955 2955 3990
240 240 83 3990
16 831500 16 1500
BW174
BW 174 ACP-4F
ACP-4F 3200
3200 1826
1826660 660
1220 1220
3000 288
3000 4420
288 73 19
4420 731680 19 1680
142
TECHNICAL
Technical Data DATA
Technical
Technical
Data Data BOMAG BOMAG
BOMAG
BOMAG BOMAG BOMAG
BW 154 ACP-4V BWBW
154
174
BWACP-4V
ACP-4F BW 174BW
154 ACP-4V 174 ACP-4F
ACP-4F
Weights Weights
Weights
Operating weight CECE w. Operating
ROPS-cabinOperating
weight .................
CECE
weight w.CECE
ROPS-cabin
kg w. ROPS-cabin................. kg
7.200 ................. kg 7.200
8.800 7.200 8.800 8.800
Static linear load CECE ...........................................
Static linear Static
load linear
CECE load ...........................................
CECE ...........................................
kg/cm 23,7 kg/cm 23,7
kg/cm 28,0 23,7 28,0 28,0
Axle load, drum CECE .............................................
Axle load,Axle drum load,
CECE drum .............................................
CECEkg .............................................
3.550 kg kg 3.550
4.700 3.550 4.700 4.700
Axle load, wheels CECE Axle ..........................................
load,Axle
wheels load,CECEwheels ..........................................
CECE kg ..........................................
3.650 kg kg 3.650
4.100 3.650 4.100 4.100
Wheel load CECE ....................................................
Wheel load WheelCECE load.................................................... kg
CECE ....................................................
kg 913 kg 9131.025 913 1.025 1.025
Grossweight .............................................................
Grossweight Grossweight
.............................................................
.............................................................
kg 8.900 kg kg 8.900
10.4008.900 10.400 10.400
Dimensions Dimensions
Dimensions
Track radius, inner ...................................................
Track radius, Trackinnerradius,...................................................
inner ...................................................
mm 2.950 mm mm2.950
2.946 2.950 2.946 2.946
Driving Characteristics
DrivingDriving
Characteristics
Characteristics
3
Asphalt
Speed (1) .................................................................
Speed (1)Speed .................................................................
(1) .................................................................
km/h 0- 10,0 km/h km/h
0- 10,0
0- 10,50- 10,0 0- 10,5 0- 10,5
0,136 Drive Drive Drive
Kubota
DeutzKubota Deutz Deutz
0,167 Engine manufacturer ................................................
Engine manufacturer
Engine manufacturer ................................................
Type .........................................................................
................................................
Kubota
Type .........................................................................
Type .........................................................................
V3307 CR-T V3307
TCDCR-TV3307
3.6 L4 CR-T TCD 3.6 L4
TCD 3.6 L4
Emission stage .........................................................
EmissionEmission stage .........................................................
stage .........................................................
StageV / TIER4f StageV
Stage/ StageV
TIER4f / TIER4f
IV / TIER4f Stage IV Stage
/ TIER4f
IV / TIER4f
Exhaust gas aftertreatment Exhaust
......................................
gas
Exhaust
aftertreatment
gas aftertreatment
......................................
......................................
DOC+DPF DOC+DPF
DPF+SCRDOC+DPF DPF+SCR DPF+SCR
Cooling .....................................................................
Cooling .....................................................................
Cooling .....................................................................
Liquid Liquid
LiquidLiquid Liquid Liquid
Number of cylinders .................................................
Number of Number
cylinders of cylinders
.................................................
.................................................
4 4 4 4 4 4
Performance ISO 14396 Performance ..........................................
Performance
ISO 14396 ISO ..........................................
14396 kW
kW..........................................
55,4 kW 55,474,4 55,4 74,4 74,4
ng bow, Performance SAE J 1995Performance ........................................
Performance
SAE J 1995 SAE........................................
J 1995 hp
hp ........................................
74,2 hp 74,299,6 74,2 99,6 99,6
Speed .......................................................................
Speed ....................................................................... min-1
Speed .......................................................................
min-1 2.400 2.400
min-1 2.000 2.400 2.000 2.000
dle Drums and Tyres Drums Drums and Tyres and Tyres
Dimensions in mm
e plate Drum width ...............................................................
Drum width Drum ...............................................................
width ...............................................................
mm 1.500 mm mm1.500
1.680 1.500 1.680 1.680
w oil H Number H1 tyres
tyres H2.......................................................
Number of tyres .......................................................
Number of L L1 4 W
.......................................................
of 4 4 4 4 4
Split drum .................................................................
Split drumSplit .................................................................
drum .................................................................
front front
front front front front
BP 10/35 658 962 700 1084 532 350
Brakes BrakesBrakes
Service
BP brake ...........................................................
12/40 Service658brake
Service
962...........................................................
brake 700...........................................................
1084 542hydrost. 400 hydrost.
hydrost.
hydrost. hydrost. hydrost.
Parking brake ...........................................................
Parking brake Parking ...........................................................
brake ...........................................................
mech. mech.
mech.mech. mech. mech.
Steering Steering
Steering
Steering system .......................................................
Technical Data Steering
Lateral displacement right/left
Lateral
system
Steering.......................................................
system .......................................................
..................................
displacement
Lateral displacement
2-p. pivoted
right/left ..................................
right/left
mm ..................................
1.130 mm mm
2-p.2-p.
BOMAG
1.130
pivoted
pivoted
2-p. pivoted
1.350 1.130
2-p. pivoted
BOMAG
1.350
2-p. pivoted
1.350
Exciter system ExciterExciter
systemsystem BP 10/35 BP 12/40
Construction .............................................................
Construction Construction
.............................................................
.............................................................
radial radial
radial radial radial radial
Autom. vibr. shut off .................................................
Weights Autom. vibr. Autom.shutvibr.
off .................................................
shut off .................................................
standard standard standard
standard standard standard
Frequency ................................................................
Frequency Frequency
................................................................
................................................................
Hz 40/55 Hz Hz 40/55 40/55 45/60
Operating weightAmplitude CECE ...........................................
Amplitude .................................................................
Amplitude
.................................................................
kg
.................................................................
mm 0,66/0,32 mm
6545/60
mm0,66/0,32 0,66/0,32
0,46/0,20
72 45/60
0,46/0,200,46/0,20
Basic weight .............................................................
Centrifugal force .......................................................
Centrifugal Centrifugal
force .......................................................
kg
force .......................................................
kN 69/63 kN
64
kN 69/63
80/61 69/63
71 80/61
80/61
Dimensions
Capacities Capacities Capacities
Fuel .......................................................................... 155,0
Fuel .......................................................................... l
Fuel ..........................................................................
l l 155,0
180,0 155,0 180,0 180,0
Working width ..........................................................
Water .......................................................................
Water ....................................................................... lmm
Water .......................................................................
l 550,0 l 350
550,0
680,0 550,0 400
680,0 680,0
Emulsion ..................................................................
EmulsionEmulsion 32,0
.................................................................. l
..................................................................
l l 32,0
32,0 32,0 32,0 32,0
Driving Characteristics
Technical modifications reserved. Machines
Technical
may be
modifications
shown
Technical
with reserved.
options.
modifications
Machines
reserved.
mayMachines
be shownmay
with be
options.
shown with options.
143
ASPHALT MANAGER – COMBINATION ROLLERS Standard Equipment
ECOMODE
Opt
Ed
BW 154 ACP-4V AM, BW 174 ACP-4F AM ASPHALT MANAGER 2 Po
Oscillation mode Ro
Highly wear resistant AM drum Sp
Plastic water tank En
under the operator's platform To
ASPHALT
MANAGER 2 Water-saving pressure sprinklers Th
Pressure sprinkler system Emulsion Pr
Autom. vibration operation Ra
2 spring-loaded hinged scrapers MI
Indicator and hazard lights Lig
ROPS cabin with seat belts Pr
+ heating Pr
2 Outside mirrors Air
Steering method/Operator's seat sliding / Ba
rotatable tec
(270grad) W
Steering with comfort control Ad
- 5 Steering modes By
Emergency STOP BC
Back-up alarm BO
Integrated display (BOP) BO
Split drum AM
Brake release device Re
Su
144
TECHNICAL
Technical Data
DATA
Technical
Technical
Data Data BOMAG BOMAG
BOMAG BOMAG BOMAG BOMAG
BW 154 ACP-4V AMBW
BW154
174
ACP-4V
BWACP-4F
154 AM
ACP-4V
AMBW 174
AM ACP-4F
BW 174 AM
ACP-4F AM
Weights Weights Weights
Operating weight CECE w. Operating
ROPS-cabin weight
Operating
.................
CECE weight kg w. ROPS-cabin
w. ROPS-cabin
CECE ................. kg
7.200 ................. kg 9.100
7.200 7.200 9.100 9.100
Static linear load CECE ...........................................
Static linearStatic load CECElinear load kg/cm...........................................
...........................................
CECE 23,7 kg/cm kg/cm
29,8
23,7 23,7 29,8 29,8
Axle load, drum CECE .............................................
Axle load, drum Axle CECE
load, drum .............................................
CECE kg .............................................
3.550 kg kg 5.000
3.550 3.550 5.000 5.000
Axle load, wheels CECE ..........................................
Axle load, wheels Axle load, CECE wheels kg
..........................................
CECE kg
..........................................
3.650 kg 4.100
3.650 3.650 4.100 4.100
Wheel load CECE ....................................................
Wheel load Wheel CECE load kg
....................................................
CECE ....................................................
913 kg kg
9131.025 913 1.025 1.025
Grossweight .............................................................
GrossweightGrossweight kg
............................................................. kg
.............................................................
8.900 kg 10.700
8.900 8.900 10.700 10.700
Dimensions Dimensions
Dimensions
Track radius, inner ...................................................
Track radius, Track
innerradius,
...................................................
inner mm...................................................
2.950 mm mm
2.950
2.946 2.950 2.946 2.946
Driving Characteristics
Driving Characteristics
Driving Characteristics
3
Asphalt
Speed (1) .................................................................
Speed (1) .................................................................
Speed (1) .................................................................
km/h 0- 10,0 km/h km/h
0- 10,0
0- 10,5 0- 10,0 0- 10,5 0- 10,5
0,136 Drive Drive Drive
Deutz Kubota
0,167 Engine manufacturer ................................................
Engine manufacturerEngine manufacturer
................................................
Type .........................................................................
................................................
Kubota
Type .........................................................................
Type .........................................................................
V3307 CR-T
Kubota
V3307 3.6 V3307
TCDCR-T L4 CR-T
Deutz Deutz
TCD 3.6 L4TCD 3.6 L4
Emission stage .........................................................
Emission stage Emission
.........................................................
stage .........................................................
StageV / TIER4f StageV IVStageV
/ TIER4f/ TIER4f Stage IV / TIER4f
Stage/ TIER4f Stage IV / TIER4f
Exhaust gas aftertreatment Exhaust
......................................
gasExhaust
aftertreatment
gas aftertreatment
......................................
......................................
DOC+DPF DPF+SCR
DOC+DPF DOC+DPF DPF+SCR DPF+SCR
Cooling .....................................................................
Cooling .....................................................................
Cooling .....................................................................
Liquid Liquid Liquid
Liquid Liquid Liquid
Number of cylinders .................................................
Number of cylinders
Number of .................................................
cylinders .................................................
4 4 4 4 4 4
Performance ISO 14396 ..........................................
Performance Performance
ISO 14396 ..........................................
ISO 14396 kW ..........................................
55,4 kW kW 74,4
55,4 55,4 74,4 74,4
ng bow, Performance SAE J 1995Performance ........................................
Performance
SAE J 1995SAE Jhp
........................................ hp
1995 ........................................
74,2 hp 99,6
74,2 74,2 99,6 99,6
Speed ....................................................................... min-1
Speed .......................................................................
Speed .......................................................................
2.400 min-1 2.000 2.400
min-1
2.400 2.000 2.000
dle Drums and Tyres Drums and Drums Tyres and Tyres
Dimensions in mm
e plate Drum width ...............................................................
Drum width Drum mm 1.500
............................................................... mm
width ............................................................... mm 1.680
1.500 1.500 1.680 1.680
w oil H H1 H2
Number of tyres .......................................................
Number of tyres
Number L L1 4 W
.......................................................
of tyres ....................................................... 4 4 4 4 4
Split drum ................................................................. front
Split drum .................................................................
Split drum ................................................................. front
front front front front
BP 10/35 658 962 700 1084 532 350
Brakes Brakes Brakes
Service
BP brake ...........................................................
12/40 Service
658brake Service
962...........................................................
brake
700...........................................................
1084 542hydrost. 400 hydrost.
hydrost. hydrost. hydrost. hydrost.
Parking brake ...........................................................
Parking brake Parking
...........................................................
brake ...........................................................
mech. mech.
mech. mech. mech. mech.
Steering Steering Steering
Steering system .......................................................
Technical Data Steering
Lateral displacement right/left
Lateral
system
Steering.......................................................
system .......................................................
..................................
displacement
Lateral displacement
2-p. pivoted
right/left ..................................
mm right/left ..................................
1.130 mm
2-p.2-p.
BOMAG
mm
1.130
pivoted
pivoted
2-p. pivoted
1.350 1.130
2-p. pivoted2-p. pivoted
BOMAG
1.350 1.350
Exciter system Exciter system
Exciter system BP 10/35 BP 12/40
Construction .............................................................
ConstructionConstruction
.............................................................
.............................................................
Directed exciter Directed
Directed Directed
exciter exciter
exciter Directed exciter
Directed exciter
Autom. vibr. shut off .................................................
Weights Autom. vibr.Autom. shut offvibr..................................................
shut off .................................................
standard standardstandard
standard standard standard
Frequency ................................................................
Operating weightFrequency
Amplitude .................................................................
Hz
CECE ................................................................
Frequency ................................................................
...........................................
mm
45
Amplitude .................................................................
0,80
Hz
kg
mm
Amplitude .................................................................
Hz
45 46
65
mm
45
0- 0,73 0,80
0,80
46
72
0- 0,73
46
0- 0,73
Basic weight .............................................................
Centifugal force ........................................................
Centifugal force Centifugal kN
........................................................
kg
force ........................................................
119 kN
64
kN
119146 119
71
146 146
Dimensions
Capacities Capacities Capacities
Fuel ..........................................................................
Fuel .......................................................................... l
Fuel ..........................................................................
l 155,0 180,0
l 155,0 155,0 180,0 180,0
Working width ..........................................................
Water ....................................................................... 550,0
Water .......................................................................
mm
l
Water .......................................................................
l
350 680,0
l 550,0 550,0
400
680,0 680,0
32,0
Emulsion .................................................................. l
Emulsion ..................................................................
Emulsion .................................................................. l 32,0
l 32,0 32,0 32,0 32,0
Driving Characteristics
Technical modifications reserved. Machines
Technical
may bemodifications
shownTechnical
with options.
reserved.
modifications
Machines reserved.
may be shown
Machines
withmay
options.
be shown with options.
145
COMBINATION ROLLERS Standard Equipment
2 amplitudes / 2 frequencies
Opti
RO
Compaction of asphalt layers, wear courses and frost blanket Edge cutter
BOMAG
Hellerwald
D-56154 Boppard
P.O. Box 5162
Tel. (0)6742 - 1000
Fax (0)6742 - 3090
Dimensions ininmm
Dimensions mm
A A BB C
C DD H H H2 H2
K KL L
O SO WS W
BWAC
BW 151 151 -AC
50- 503300
3300 1844
1844 730
730 1100
1100 220022003000 3000
250 4400
250 82
4400 1682 1680
16 1680
BW 161 AC - 50 3620 1836 670 1220 2315 3050 250 4840 78 17 1680
BW 161 AC - 50 3620 1836 670 1220 2315 3050 250 4840 78 17 1680
146
BOMAG
TECHNICAL
Technical Data
DATA
Technical
Technical
Data Data BOMAG BOMAG
BOMAG
BOMAG BOMAG BOMAG
BW 151 AC - 50 BWBW 161
BW
151 ACAC
151 - AC
- 50 50 - 50
BW 161BW
AC161
- 50AC - 50
Weights Weights
Weights
Operating weight CECE w. Operating
ROPS-cabinOperating
weight .................
CECE
weight w.CECE kg w. ROPS-cabin
ROPS-cabin ................. kg
7.500 ................. 9.700 7.500
kg 7.500 9.700 9.700
Static linear load CECE ...........................................
Static linear Static
load linear
CECE load kg/cm
...........................................
CECE ...........................................
23,2 kg/cm kg/cm 30,4 23,2
23,2 30,4 30,4
Axle load, drum CECE .............................................
Axle load,Axle drum load,
CECE drum CECEkg
.............................................
.............................................
3.900 kg kg 3.900
5.100 3.900 5.100 5.100
Axle load, wheels CECE Axle ..........................................
load,Axle
wheels load,CECEwheels ..........................................
CECE kg ..........................................
3.600 kg kg 3.600
4.600 3.600 4.600 4.600
Wheel load CECE ....................................................
Wheel load WheelCECE load kg
.................................................... kg
CECE ....................................................
900 kg 9001.150 900 1.150 1.150
Grossweight .............................................................
Grossweight Grossweight kg
.............................................................
.............................................................
8.500 kg kg 8.500
11.2008.500 11.200 11.200
Dimensions Dimensions
Dimensions
Track radius, inner ...................................................
Track radius, Trackinnerradius,...................................................
inner ...................................................
mm 4.390 mm mm4.390
4.900 4.390 4.900 4.900
Length (without towing hitch)Length ...................................
(without
Lengthtowing(without hitch)
towing ...................................
mmhitch) ...................................
4.400 mm mm4.400
4.840 4.400 4.840 4.840
3
Asphalt
Driving Characteristics
DrivingDriving
Characteristics
Characteristics
0,136 Max. travel speed .....................................................
Max. travel Max.speed
travel .....................................................
speed .....................................................
km/h 0- 11,0 km/h km/h
0- 11,0
0- 12,00- 11,0 0- 12,0 0- 12,0
Max. gradeability without/with
Max. vibr.
gradeability
Max.
..........................
gradeability
without/with without/with
vibr.
% ..........................
vibr. 40/30
..........................
% % 40/30
35/30 40/30 35/30 35/30
0,167
Drive Drive Drive
Engine manufacturer ................................................
Engine manufacturer
Engine manufacturer................................................
................................................
Kubota DeutzKubota
Kubota Deutz Deutz
Type .........................................................................
Type .........................................................................
Type .........................................................................
V 3307 DI-T BF4M
V 3307 V2012
DI-T 3307CDI-T BF4M 2012 BF4M
C 2012 C
Emission stage .........................................................
EmissionEmissionstage .........................................................
stage .........................................................
Stage IIIa / TIER4i Stage IIIaStage
Stage IIIa / TIER4i Stage II / Stage
II/ TIER4i
/ TIER2 TIER2II / TIER2
Cooling .....................................................................
Cooling .....................................................................
Cooling .....................................................................
Liquid LiquidLiquid
Liquid Liquid Liquid
Number of cylinders .................................................
Number of Number
cylinders of cylinders
.................................................
.................................................
4 4 4 4 4 4
ng bow, Performance ISO 14396 Performance ..........................................
Performance
ISO 14396 ISO kW..........................................
..........................................
14396 55,4 kW kW 55,4103,0 55,4 103,0 103,0
Performance SAE J 1995Performance ........................................
Performance
SAE J 1995 hp ........................................
SAE........................................
J 1995 74,3 hp hp 74,3138,0 74,3 138,0 138,0
dle Speed ....................................................................... min-1
Speed .......................................................................
Speed .......................................................................
2.200 min-1 min-1 2.500 2.200
2.200 2.500 2.500
Dimensions in mm
e plate Drums and Tyres Drums Drums and Tyres and Tyres
w oil Hwidth H1 H2 Lmm L1 1.680
Drum width ...............................................................
Drum Drum W
............................................................... mm
width ............................................................... mm1.680
1.680 1.680 1.680 1.680
Number of tyres .......................................................
Number of Number
tyres .......................................................
of tyres .......................................................
4 4 4 4 4 4
BP
Tyre10/35 Tyre658 962 700 1084 53211,00-20
size ..................................................................
sizeTyre 350 18PR
..................................................................
size .................................................................. 11,00-20
11,00-20 11,00-20
18PR18PR 18PR 11,00-20 11,00-20
18PR 18PR
BP 12/40
Brakes 658Brakes
Brakes 962 700 1084 542 400
Service brake ...........................................................
Service brake Service ...........................................................
brake ...........................................................
hydrost. hydrost.
hydrost.
hydrost. hydrost. hydrost.
Parking brake ...........................................................
Parking brake Parking ...........................................................
brake ...........................................................
multi disc multi
multi
discdisc
multi disc multi discmulti disc
Steering
Technical Data Steering
Steering
Steering system .......................................................
Steering system
Steering.......................................................
system .......................................................
oscil.artic. BOMAG
oscil.artic.
oscil.artic.
oscil.artic. BOMAG
oscil.artic.
oscil.artic.
Exciter system ExciterExciter
systemsystem BP 10/35 BP 12/40
Vibrating drum ..........................................................
Vibrating Vibrating
drum ..........................................................
drum ..........................................................
front front front
front front front
Weights
Autom. vibr. shut off .................................................
Autom. vibr. Autom.shutvibr.
off .................................................
shut off .................................................
standard standard
standard
standard standard standard
Frequency ................................................................
Operating weightFrequency CECE Frequency Hz
................................................................
................................................................
........................................... 45/55 Hz
kg Hz 45/55
65 40/55 45/55 40/55
72 40/55
Amplitude .................................................................
AmplitudeAmplitude mm 0,68/0,27 mm
.................................................................
................................................................. mm0,68/0,27
Basic weight .............................................................
Centrifugal force .......................................................
Centrifugal Centrifugal kN
force .......................................................
kg
force .......................................................
75/45 kN
64 95/90 0,68/0,27
0,87/0,44
kN 75/45 75/45
0,87/0,440,87/0,44
71 95/90
95/90
Dimensions
Capacities Capacities Capacities
Fuel ..........................................................................
Fuel ..........................................................................
Fuel ..........................................................................
l 125,0 l l 125,0
145,0 125,0 145,0 145,0
Working width ..........................................................
Water .......................................................................
l 600,0
mm
Water .......................................................................
Water ....................................................................... l l
350750,0 600,0
600,0
400
750,0 750,0
Driving Characteristics
Technical modifications reserved. Machines
Technical
may be
modifications
shown
Technical
with reserved.
options.
modifications
Machines
reserved.
mayMachines
be shownmay
with be
options.
shown with options.
147
PNEUMATIC TYRED ROLLER Standard Equipment
Operator's platform with:
Opti
*R
allows for an especially sensitive drive control of the roller in Backup warning buzzer with broadband
technology
three speed levels. Special painting
Additional weight
PRE 538 73 010 - 7t Grossweight
- 9t Grossweight
- 11t Grossweight
TELEMATIC
Dimensions
Dimensions in mm in mm
A B A
H B
H2 K H L H2W K L W
BW 11 RH-5 BW 2500
11 RH-5
1727 2500 2870
2085 1727 380208544302870
1727 380 4430 1727
148
TECHNICAL
Technical Data
DATA
Technical Data BOMAG BOMAG
BW 11 RH-5 BW 11 RH-5
Weights Weights
Operating weight w. ROPS Operating
CECE ...........................
weight w. ROPS CECE kg ...........................
5.200 kg 5.200
Operating weight CECE Operating
w. ROPS-cabin weight................. kg
CECE w. ROPS-cabin .................
5.400 kg 5.400
Grossweight ............................................................. kg
Grossweight .............................................................
11.000 kg 11.000
Max. middle wheel load CECE Max. middle................................ kg
wheel load CECE ................................
1.222 kg 1.222
Dimensions Dimensions
Track radius, inner ...................................................
Track radius, inner ...................................................
mm 3.100 mm 3.100
Driving Characteristics
Driving Characteristics
Speed (1) ................................................................. km/h
Speed (1) .................................................................
12,0 km/h 12,0
Speed (2) ................................................................. km/h
Speed (2) .................................................................
16,0 km/h 16,0
3
Asphalt
Speed (3) ................................................................. km/h
Speed (3) .................................................................
20,0 km/h 20,0
0,136 Max. gradeability (dep. on Max.soilgradeability
con.) ........................ % ........................
(dep. on soil con.) 20 % 20
149
PNEUMATIC TYRED ROLLER Standard Equipment
Operator's platform with:
Opti
*R
Dimensions in mm
Dimensions in mm
A
A
B H
B H2
H K H2L KW L W
BW 11BW
RH-511 RH-5
2500 2500 2085
1920 1920 2870
2085380 2870
4430 3801727 4430 1727
150
TECHNICAL
Technical Data
DATA
Technical Data BOMAG BOMAG
BW 11 RH-5 BW 11 RH-5
Weights Weights
Operating weight w. ROPS Operating
CECE ...........................
weight w. ROPS CECE kg ...........................
5.200 kg 5.200
Operating weight CECE w. Operating
ROPS-cabin weight .................
CECE w. ROPS-cabin
kg .................
5.400 kg 5.400
Grossweight .............................................................
Grossweight .............................................................
kg 11.000 kg 11.000
Max. middle wheel load CECE Max. middle
................................
wheel load CECE ................................
kg 1.222 kg 1.222
Dimensions Dimensions
Track radius, inner ...................................................
Track radius, inner ...................................................
mm 3.100 mm 3.100
Driving Characteristics
Driving Characteristics
Speed (1) .................................................................
Speed (1) .................................................................
km/h 12,0 km/h 12,0
Speed (2) .................................................................
Speed (2) .................................................................
km/h 16,0 km/h 16,0
3
Asphalt
Speed (3) .................................................................
Speed (3) .................................................................
km/h 20,0 km/h 20,0
Max. gradeability (dep. on Max.
soil gradeability
con.) ........................
(dep. on soil con.)
% ........................
20 % 20
0,136
0,167 Drive Drive
Engine manufacturer ................................................
Engine manufacturer ................................................
Kubota Kubota
Type .........................................................................
Type .........................................................................
V3307 CR-T V3307 CR-T
Emission stage .........................................................
Emission stage .........................................................
StageV / TIER4f StageV / TIER4f
Exhaust gas aftertreatment Exhaust
......................................
gas aftertreatment ......................................
DPF DPF
Cooling .....................................................................
Cooling .....................................................................
Liquid Liquid
Number of cylinders .................................................
Number of cylinders .................................................
4 4
ng bow, Performance ISO 14396 Performance ..........................................
ISO 14396 ..........................................
kW 55,4 kW 55,4
Performance SAE J 1995Performance ........................................
SAE J 1995 ........................................
hp 74,0 hp 74,0
Electric equipment ...................................................
Electric equipment ...................................................
V 12 V 12
dle
Dimensions in mm
Drive system ............................................................
Drive system ............................................................
hydrost. hydrost.
e plate Driven axles .............................................................
Driven axles .............................................................
rear rear
w oil H H1 H2 L L1 W
Tyres Tyres
BP
Tyre 10/35 Tyre658 962 700 1084 5327.50x15
size .................................................................. 35014PL
size .................................................................. 7.50x15 14PL
Wheel track overlap .................................................
Wheel track overlap .................................................
mm
BP 12/40 658 962 700 1084 542> 20,0 400 mm > 20,0
Number of tyres, front / rear
Number
.....................................
of tyres, front / rear .....................................
5/4 5/4
Steering Steering
Steering system ....................................................... oscil.artic.
Steering system ....................................................... oscil.artic.
Technical
Steering method Data
....................................................... hydrost.
Steering method ....................................................... hydrost.
BOMAG BOMAG
Steering angle +/- ..................................................... 35
Steering angle +/- .....................................................
grad grad 35
Oscillating angle +/- ................................................. 10
Oscillating angle +/- .................................................
grad grad BP
10 10/35 BP 12/40
Oscillation of tyres, front Oscillation
..........................................
of tyres, front ..........................................
grad 5 grad 5
Weights
Capacities Capacities
Operating weightFuel CECE ...........................................
Fuel ..........................................................................
..........................................................................
l 200,0 lkg 65
200,0 72
Basic weight .............................................................
Water .......................................................................
Water .......................................................................
l 530,0 lkg 64
530,0 71
Technical modifications reserved. Machines
Technical
may be
modifications
shown with reserved.
options. Machines may be shown with options.
Dimensions
Working width .......................................................... mm 350 400
Driving Characteristics
Working speed, max. ............................................... m/min 25 25
Max. gradeability (dep. on soil con.) ........................ % 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
151
PNEUMATIC TYRED ROLLERS Standard Equipment
Operator's platform with:
Optiona
* ROPS
152
TECHNICAL
Technical Data
DATA
Technical
Technical
Data Data BOMAG BOMAG
BOMAG
BOMAG BOMAG BOMAG
BW 24 RH BWBW
2427
BW
RHRH
24 RH BW 27 BW
RH 27 RH
Weights Weights
Weights
Operating weight CECE w. Operating
ROPS-cabin Operating
weight .................
CECEweight w.CECE kg w. ROPS-cabin
ROPS-cabin ................. kg
8.800 ................. kg 8.800
13.6008.800 13.600 13.600
Grossweight .............................................................
Grossweight Grossweight kg
.............................................................
.............................................................
24.000 kg kg 24.000
27.00024.000 27.000 27.000
Max. middle wheel load CECE Max. middle
................................
Max. wheel
middle loadwheel
CECE loadkgCECE ................................
................................
3.000 kg kg 3.000
3.375 3.000 3.375 3.375
Dimensions Dimensions
Dimensions
Track radius, inner ...................................................
Track radius, Trackinnerradius,...................................................
inner ...................................................
mm 5.320 mm mm5.320
5.320 5.320 5.320 5.320
Driving Characteristics
DrivingDriving
Characteristics
Characteristics
Speed (1) .................................................................
Speed (1)Speed km/h
.................................................................
(1) .................................................................
0- 7,0 km/h 0- 7,0
km/h 0- 7,0 0- 7,0 0- 7,0 0- 7,0
Speed (2) .................................................................
Speed (2)Speed km/h
.................................................................
(2) .................................................................
0- 10,5 km/h 0- 10,5
km/h 0- 10,50- 10,5 0- 10,5 0- 10,5
Speed (3) .................................................................
Speed (3)Speed km/h
.................................................................
(3) .................................................................
0- 20,0 km/h 0- 20,0
km/h 0- 20,00- 20,0 0- 20,0 0- 20,0
3
Asphalt
Max. gradeability (dep. on Max.
soil gradeability
con.)Max.........................
gradeability
(dep. on soil (dep. %on soil
con.) ........................ %
con.)30........................ % 30 27 30 27 27
0,136 Drive Drive Drive
Engine manufacturer ................................................
Engine manufacturer
Engine manufacturer ................................................
................................................
Deutz Deutz
DeutzDeutz Deutz Deutz
0,167 Type .........................................................................
Type .........................................................................
Type .........................................................................
TCD 2012 L04 2V TCD 2012
TCD TCD
L04L04
2012 2012
2V 2V L04 2V TCD 2012 L042012
TCD 2V L04 2V
Emission stage .........................................................
EmissionEmissionstage .........................................................
stage .........................................................
Stage IIIa / TIER3 Stage IIIaStage
Stage / TIER3
IIIa IIIa / TIER3
/ TIER3 Stage IIIaStage
/ TIER3
IIIa / TIER3
Cooling ..................................................................... Liquid
Cooling .....................................................................
Cooling ..................................................................... Liquid
LiquidLiquid Liquid Liquid
Number of cylinders .................................................
Number of Number
cylinders of cylinders 4
.................................................
................................................. 4 4 4 4 4
Performance ISO 14396 Performance ..........................................
Performance
ISO 14396 ISO kW..........................................
74,9
..........................................
14396 kW kW 74,9100,0 74,9 100,0 100,0
Speed ....................................................................... min-1 2.300
Speed ....................................................................... min-1
Speed ....................................................................... 2.300
min-1 2.300 2.300 2.300 2.300
ng bow, Electric equipment ...................................................
Electric equipment
Electric equipment V 12
................................................... V
................................................... V 12 12 12 12 12
Drive system ............................................................
Drive system Drive............................................................
system ............................................................
Driven axles .............................................................
Driven axles Driven .............................................................
axles .............................................................
rear rearrear rear rear rear
dle
Dimensions
Tyres in mm Tyres Tyres
e plate
Tyre size ..................................................................
TyreH sizeTyre..................................................................
H1size ..................................................................
H2 L L1 11,00-20 W 18PR 11,00-20
11,00-20
11,00-20
18PR
18PR 18PR 11,00-20 11,00-20
18PR 18PR
w oil Wheel track overlap .................................................
Wheel track Wheel overlap
track.................................................
overlap .................................................
mm 42,0 mm mm42,042,0 42,0 42,0 42,0
BP 10/35 658 962 700 1084 532 350
Brakes BrakesBrakes
BP 12/40
Service 658brake
Service 962
Service 700
brake ........................................................... 1084 542pneum./hydr. 400
...........................................................
brake ........................................................... pneum./hydr.
pneum./hydr.
pneum./hydr. pneum./hydr.
pneum./hydr.
Parking brake ...........................................................
Parking brake Parking ...........................................................
brake ...........................................................
multi disc multi
multi
discdisc
multi disc multi discmulti disc
Steering Steering
Steering
Steering system ....................................................... 2-p.2-p.
pivoted 2-p. pivoted
Technical Data Steering system Steering.......................................................
system .......................................................
2-p. pivoted
BOMAG
2-p. pivoted
pivoted
BOMAG
2-p. pivoted
Steering method .......................................................
Steering methodSteering.......................................................
method .......................................................
hydrost. hydrost. hydrost.
hydrost. hydrost. hydrost.
Steering angle +/- .....................................................
Steering angle Steering +/- angle grad
.....................................................
+/- .....................................................
30 grad grad3030 30 30 30
BP 10/35 BP 12/40
Oscillation of tyres, front Oscillation
..........................................
Oscillation
of tyres, frontof tyres, grad
..........................................
front grad
..........................................
4 grad4 4 4 4 4
Level adjustment ......................................................
Level adjustment
Level adjustment mm
......................................................
......................................................
100 mm mm100100 100 100 100
Weights
Sprinkler System
Operating weightSprinkler CECE Sprinkler
SystemSystem
........................................... kg 65 72
Type of sprinkling .....................................................
Type of sprinkling
Type of sprinkling
.....................................................
.....................................................
pressure pressure
pressure
pressure pressure pressure
Basic weight ............................................................. kg 64 71
Capacities Capacities
Capacities
Dimensions
Fuel .......................................................................... 250,0
Fuel .......................................................................... l
Fuel ..........................................................................
l l 250,0
250,0 250,0 250,0 250,0
Water ....................................................................... 400,0
Water ....................................................................... l
Water .......................................................................
l l 400,0
400,0 400,0 400,0 400,0
Working width
Volume of ballast compartment
..........................................................
Volume...............................
ofVolume
ballast of compartment
ballast compartment
m3 3,5
...............................
mm
m3
...............................
350
m3 3,53,5 3,5
400
3,5 3,5
Technical modifications reserved. Machines
Technical
may be
modifications
shown
Technical
with reserved.
options.
modifications
Machines
reserved.
mayMachines
be shownmay
with be
options.
shown with options.
Driving Characteristics
Working speed, max. ............................................... m/min 25 25
Max. gradeability (dep. on soil con.) ........................ % 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
153
PNEUMATIC TYRED ROLLER Standard Equipment
Operator's platform with:
Optional Equipm
* ROPS/FOPS w
BW 28 RH
- Steering wheel * ROPS-cabin wi
- Travel lever with multi-functional arm rest * ROPS cabin wi
- Rotable and laterally sliding seat Temperature disp
(-70°/+15°) Fire extinguisher
Control panel for Rearview camera
- Speedometer Rotary beacon
- Engine oil pressure Additional lighting
- Engine temperature Radio Bluetooth
- Air filter vacuum Additive spraying
- Charge control Central tyre inflat
- Hydraulic oil filter Scraper coco ma
- Coolant Level tiltable
- fuel tank capacity Scraper brush, sp
- Sprinkler system - tank capacity Thermal aprons
- Hour meter Profiled tyres
Warning horn Wheels MICHEL
2 Outside mirrors Wheels DUNLOP
Indicator and hazard lights Waterproof frame
Working lights Additional weight
BOMAG ECOMODE Max. ballast 10t
Spraying system and scraper Max. ballast 10t F
Back-up alarm Max. ballast 12t
Cold start device Max. ballast 12t F
Service diagnostics tool Max. ballast 16t
Max. ballast 16t F
Max. ballast 18t
Standard Equipment Optional Equipment
Max. ballast 20t
Operator's platform with: * ROPS/FOPS with safety belt
Max. ballast 24t
- Steering wheel * ROPS-cabin with heating
Max. ballast 28t
- Travel lever with multi-functional arm rest * ROPS cabin with air conditioning
Special painting
Fields of application: - Rotable and laterally sliding seat Temperature display
Broadband buzze
(-70°/+15°) Fire extinguisher
Compaction of asphalt wear courses, asphalt binder
Controlcourses
panel for and Rearview camera
BOMAG TELEMA
Tool kit
asphalt surface layers as well as compaction of natural
- Speedometer
soils and
- Engine oil pressure
Rotary beacon
Additional lighting for cabin
* Standard delive
materials stabilized with lime or cement. Due to- Engine
their temperature
excellent Radio Bluetooth
(valid within Euro
154
TECHNICAL
Technical Data
DATA
Technical Data BOMAG BOMAG
BW 28 RH BW 28 RH
Weights Weights
Operating weight CECE w. Operating
ROPS-cabin weight ................. kg
CECE w. ROPS-cabin .................
8.600 kg 8.600
Grossweight ............................................................. kg
Grossweight .............................................................
28.000 kg 28.000
Max. middle wheel load CECE Max. middle wheel load CECE kg
................................ ................................
3.500 kg 3.500
Dimensions Dimensions
Track radius, inner ...................................................
Track radius, inner ...................................................
mm 5.700 mm 5.700
Driving Characteristics
Driving Characteristics
Speed (1) .................................................................
Speed (1) .................................................................
km/h 0- 19,0 km/h 0- 19,0
Max. gradeability (dep. onMax. soil con.)
gradeability
........................
(dep. on soil con.)
% ........................
27 % 27
3 Drive Drive
Asphalt
Engine manufacturer ................................................
Engine manufacturer ................................................
Deutz Deutz
0,136 Type .........................................................................
Type .........................................................................
TCD 3.6 L4 TCD 3.6 L4
Emission stage .........................................................
Emission stage .........................................................
Stage IV / TIER4f Stage IV / TIER4f
0,167 Exhaust gas aftertreatment Exhaust
......................................
gas aftertreatment ......................................
DPF+SCR DPF+SCR
Cooling .....................................................................
Cooling .....................................................................
Liquid Liquid
Number of cylinders .................................................
Number of cylinders .................................................
4 4
Performance ISO 14396 .......................................... kW
Performance ISO 14396 .......................................... 100,0 kW 100,0
Performance SAE J 1995Performance ........................................ hp
SAE J 1995 ........................................
134,0 hp 134,0
Speed ....................................................................... min-1
Speed .......................................................................
2.000 min-1 2.000
ng bow, Electric equipment ................................................... V
Electric equipment ...................................................
12 V 12
Drive system ............................................................
Drive system ............................................................
hydrost. hydrost.
dle Driven axles .............................................................
Driven axles .............................................................
rear rear
Dimensions in mm
e plate Tyres Tyres
w oil TyreH H1 H2 L
Tyre size .................................................................. L1 11,00-20 W 18PR
size .................................................................. 11,00-20 18PR
Wheel track overlap .................................................
Wheel track overlap .................................................
mm 32,0 mm 32,0
BP 10/35 658 962 700 1084 532 350
Brakes Brakes
BP 12/40
Service 658brake962 700 1084 542hydrost.
brake ...........................................................
Service 400
........................................................... hydrost.
Parking brake ...........................................................
Parking brake ...........................................................
multi disc multi disc
Steering Steering
Technical
Steering system Data
....................................................... 2-p. pivoted
Steering system ....................................................... 2-p. pivoted
BOMAG BOMAG
Steering method ....................................................... hydrost.
Steering method ....................................................... hydrost.
Steering angle +/- ..................................................... grad 30
Steering angle +/- ..................................................... grad BP
30 10/35 BP 12/40
Oscillation of tyres, front .......................................... grad 4
Oscillation of tyres, front .......................................... grad 4
Level adjustment ...................................................... mm 100
Level adjustment ...................................................... mm 100
Weights
Operating
Sprinkler System weightSprinkler CECE ...........................................
System kg 65 72
Type of sprinkling .....................................................
Type of sprinkling .....................................................
pressure pressure
Basic weight ............................................................. kg 64 71
Capacities Capacities
Dimensions
Fuel ..........................................................................
Fuel ..........................................................................
l 200,0 l 200,0
Water .......................................................................
Working Water .......................................................................
width .......................................................... l 340,0 l
mm 340,0
350 400
Volume...............................
Volume of ballast compartment of ballast compartmentm3 3,0
............................... m3 3,0
Technical modifications reserved. Machines
Technical
may bemodifications
shown with options.
reserved. Machines may be shown with options.
Driving Characteristics
Working speed, max. ............................................... m/min 25 25
Max. gradeability (dep. on soil con.) ........................ % 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
155
PNEUMATIC TYRED ROLLER Standard Equipment
Operator's platform with:
Optional Equip
* ROPS/FOPS
BW 28 RH
- Steering wheel * ROPS-cabin w
- Travel lever with multi-functional arm rest * ROPS cabin w
- Rotable and laterally sliding seat Temperature di
(-70°/+15°) Fire extinguishe
Control panel for Rearview came
- Speedometer Working lights
- Engine oil pressure 2 Outside mirro
- Engine temperature Indicator and h
- Air filter vacuum Rotary beacon
- Charge control Additional lighti
- Hydraulic oil filter Radio Bluetooth
- Coolant Level Additive sprayin
- fuel tank capacity Central tyre infl
- Sprinkler system - tank capacity Scraper brush,
- Hour meter Scraper coco m
Warning horn tiltable
Back-up alarm Spraying system
BOMAG ECOMODE Thermal aprons
Cold start device Profiled tyres
Service diagnostics tool Wheels MICHE
Wheels DUNLO
frame
Standard Equipment Optional Equipment
Additional weig
Operator's platform with: * ROPS/FOPS with safety belt
Max. ballast 10
- Steering wheel * ROPS-cabin with heating
Max. ballast 10
- Travel lever with multi-functional arm rest * ROPS cabin with air conditioning
Max. ballast 12
- Rotable and laterally sliding seat Temperature display
Max. ballast 12
(-70°/+15°) Fire extinguisher
Max. ballast 16
Control panel for Rearview camera
Max. ballast 16
- Speedometer Working lights
Fields of application: - Engine oil pressure 2 Outside mirrors
Max. ballast 18
Max. ballast 20
Compaction of asphalt wear courses, asphalt binder courses and
- Engine temperature Indicator and hazard lights
Max. ballast 24
- Air filter vacuum Rotary beacon
asphalt surface layers as well as compaction of natural soils and
- Charge control Additional lighting for cabin
Max. ballast 28
Special painting
materials stabilized with lime or cement. Due to-- Hydraulic
their excellent
Coolant Level
oil filter Radio Bluetooth
Broadband buz
Additive spraying system
kneading effect pneumatic tired rollers achieve an excellent
- fuel tank capacity Central tyre inflating system
BOMAG TELEM
156
BOMAG
Hellerwald
D-56154 Boppard
P.O. Box 5162
TECHNICAL
Technical Data
DATA
Technical Data BOMAG BOMAG
BW 28 RH BW 28 RH
Weights Weights
Operating weight CECE w. Operating
ROPS-cabin weight ................. kg
CECE w. ROPS-cabin .................
8.600 kg 8.600
Grossweight ............................................................. kg
Grossweight .............................................................
28.000 kg 28.000
Max. middle wheel load CECE Max. middle
................................ kg
wheel load CECE ................................
3.500 kg 3.500
Dimensions Dimensions
Track radius, inner ...................................................
Track radius, inner ...................................................
mm 5.700 mm 5.700
Driving Characteristics
Driving Characteristics
Speed (1) .................................................................
Speed (1) .................................................................
km/h 0- 19,0 km/h 0- 19,0
Max. gradeability (dep. on Max.
soil gradeability
con.) ........................
(dep. on soil con.)
% ........................
27 % 27
3 Drive Drive
Asphalt
Engine manufacturer ................................................
Engine manufacturer ................................................
Deutz Deutz
0,136 Type .........................................................................
Type .........................................................................
TCD 2012 L04 2V TCD 2012 L04 2V
Emission stage .........................................................
Emission stage .........................................................
Stage IIIa / TIER3 Stage IIIa / TIER3
0,167 Cooling .....................................................................
Cooling .....................................................................
Liquid Liquid
Number of cylinders .................................................
Number of cylinders .................................................
4 4
Performance ISO 14396 Performance .......................................... kW
ISO 14396 ..........................................
92,0 kW 92,0
Performance SAE J 1995Performance ........................................ hp
SAE J 1995 ........................................
123,0 hp 123,0
Speed ....................................................................... min-1
Speed .......................................................................
2.100 min-1 2.100
Electric equipment ................................................... V
Electric equipment ...................................................
12 V 12
ng bow, Drive system ............................................................
Drive system ............................................................
hydrost. hydrost.
Driven axles .............................................................
Driven axles .............................................................
rear rear
dle Tyres Tyres
Dimensions in mm
e plate Tyre size ..................................................................
Tyre size ..................................................................
11,00-20 18PR 11,00-20 18PR
w oil Wheel H track overlap
H1 .................................................
H2 Lmm L1 32,0W
Wheel track overlap ................................................. mm 32,0
Brakes
BP 10/35 Brakes
658 962 700 1084 532 350
Service brake ...........................................................
Service brake ...........................................................
hydrost. hydrost.
BP 12/40
Parking 658brake962 700 1084 542multi400
brake ...........................................................
Parking ...........................................................
disc multi disc
Steering Steering
Steering system .......................................................
Steering system .......................................................
2-p. pivoted 2-p. pivoted
Technical
Steering methodData.......................................................
Steering method .......................................................
hydrost. hydrost.
BOMAG BOMAG
Steering angle +/- .....................................................
Steering angle +/- .....................................................
grad 30 grad 30
Oscillation of tyres, front Oscillation
..........................................
of tyres, front ..........................................
grad 4 grad BP
4 10/35 BP 12/40
Level adjustment ......................................................
Level adjustment ......................................................
mm 100 mm 100
Weights
Sprinkler System Sprinkler System
Type of sprinkling
Operating .....................................................
weight Type
CECE of sprinkling .....................................................
........................................... pressure kg pressure
65 72
Basic weight .............................................................
Capacities Capacities kg 64 71
Fuel .......................................................................... l 200,0
Fuel .......................................................................... l 200,0
Dimensions
Water ....................................................................... l 340,0
Water ....................................................................... l 340,0
Volume of ballast compartment Volume...............................
of ballast compartmentm3 3,0
............................... m3 3,0
Working width ..........................................................
Technical modifications reserved. Machines
Technical
may be
modifications
shown with reserved.
options. Machines may be shown with options.
mm 350 400
Driving Characteristics
Working speed, max. ............................................... m/min 25 25
Max. gradeability (dep. on soil con.) ........................ % 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
157
PAVER Standard equipment
Individual control of hopper wings
O
BF 223 C Adjustable truck bumper rollers
Reversible scraper belt,
electromechanically controlled
2 reversible augers,
electromechanically controlled
Mechanical auger height adjustment
Mechanical walk board adjustment
Vibration setting infinite
(960-3600 rpm)
Crawler track with PLC travel, control
and braking system
1 working speed range, 1 fast travel
speed range
200 mm floor plates with rubber
pads, individually screwed
Diesel engine, 4 cylinder, 36.3 kW
Electrically heated HF hydraulic
screed with 1.4 - 2.6 m placing width
Fully automated screed heating
(electric heating)
Hinged and telescopic food walk
Reduction pads 500 mm
Measurements in mm
158 B C E F G H I Q R S T V Z
Shipping dimensions
BF 223 C
in m3
1020-1100 1471 4365-4445 435 2905 1895 1320 1080 2755 200 405 1429 5100
BF 223 C 11,015
TECHNICAL DATA
Technical
Technical
data data BOMAG BOMAG
BF 223BF
C 223 C
Max. Production
Max. Production
.............................................................
............................................................. t/hr t/hr200 200
Diesel engine
Diesel
..................................................................
engine .................................................................. Type TypePerkins PK404D-22
Perkins PK404D-22
EmissionEmission
stage ...............................................................
stage ............................................................... Type TypeStage IIIStage
a / TIER
III a3 / TIER 3
Output (ISO
Output
3046/1)
(ISO.......................................................
3046/1) ....................................................... kW (hp) kW36,3
(hp) (49,4)
36,3 (49,4)
at 2800 r.p.m.
at 2800 r.p.m.
Number ofNumber
cylindersof cylinders
.......................................................
....................................................... 4 4
Motor cooling
Motor.................................................................
cooling ................................................................. Water cooling
Water cooling
Crawler track
Crawler
..................................................................
track .................................................................. mm mm200 x 1471 200 x 1471
Rubber-BPLRubber-BPL
3
Asphalt
Working Working
speed ...............................................................
speed ............................................................... m/min m/min 0-29 0-29
0,136 Drive speed ....................................................................
Drive speed .................................................................... km/h km/h0-4,1 0-4,1
Hopper volume
Hopper...............................................................
volume ............................................................... m 3
m 2,8
3
2,8
0,167 Scraper belt
Scraper
width belt
..........................................................
width .......................................................... mm mm440 440
Auger diameter
Auger diameter
...............................................................
............................................................... mm mm280 280
Diesel tank
Diesel
capacity
tank capacity
.......................................................
....................................................... l l 110 110
HydraulicHydraulic
tank volume tank....................................................
volume.................................................... l l 75 75
Screed type
Screed
....................................................................
type .................................................................... HF HF
Screed compaction
Screed compaction
........................................................
........................................................ VibrationVibration
ng bow, Screed heating
Screed...............................................................
heating ............................................................... electric electric
Width of Width
the basicof thescreed
basic..............................................
screed .............................................. m m 1,40-2,601,40-2,60
dle Max. placing
Max.width
placing .........................................................
Dimensions inwidthmm ......................................................... m m 4,00 4,00
e plate Weight ofWeight
the basicof thescreed
basic............................................
screed ............................................ kg kg 640 640
w oil Smoothing Smoothing H ...................................
plate width/thickness
plate width/thickness H1...................................
H2 L L1 W
mm mm245/10 245/10
Operating Operating weight ............................................................
weight ............................................................ kg
BP 10/35 658 962 700 1084 532 350 kg 5.100 5.100
Straight crossfall.............................................................
Straight crossfall............................................................. % % -2 to +2,5 -2 to +2,5
Max.12/40
BP effective
Max. effective
amplitude amplitude
................................................
658................................................
962 700 1084 542 mm
400 mm200 200
Technial modifications
Technial modifications
reserved. Machines
reserved.may
Machines
be shown
maywith
be shown
options.
with options.
159
PAVER Standard equipment
D
O
BF 300 C er l se d pl
ide ie ys em (p .)
rm d s men ,
-r , ydr. il le, 4- ld r
lig ing
. . . creed relie sys em
ndi id lly c n r lled pper ings
e ersi le nd indi id lly c n r lled
scr per el s
e ersi le nd indi id lly c n r lled
gers
n in s mper nd i r i n
d s men
lly m ic screed e ing
s e ing elemen s
cen r l elec rics, ser ice
nd l c de displ y
ydr. pre- ensi ning cr ler
r cks i erl d pr ec i n
em e c n r l m eri l l
sens rs r m e l er l screed
c n r l p nels
ec nic l cr n d s men
lec r -mec nic l sens rs r
scr per el s
l r s nd sens rs r gers
Fields of application:
en r l l ric i n r screed nd
The road paver BF 300, a machine which is suited for the ger
inner-city reconstruction measures as well as for the rural
road construction. Based on itsStandard
compactequipment
design, also con- Optional equipment
struction works in restricted areas
are optimally
D possible. creed e ensi n 30 cm, 0 cm
The unexampled versatility of the BF 300
er l seoffers
d plbestrm
appli-
d s men , (3.4 m .0 m)
ide ie ys em (p .) le ning ki
cation possibilities in the construction of cycle paths as well
-r , ydr. il le, 4- ld r ydr lic ger li
as in landscaping projects. lig ing l r s nd sens rs r scr per el s
. . . creed relie sys em ydr lic cr n d s men
PRE 891 06 010 ndi id lly c n r lled pper ings p i n l p in inis
e ersi le nd indi id lly c n r lled l r s nd r elec r -mec nic l
scr per el s le elling sys ems
e ersi le nd indi id lly c n r lled r ss-sl pe le elling sys em
gers lec ric side pl e e ing r screed
n in s mper nd i r i n S340E
d s men m ic cen r l l ric i n sys em
lly m ic screed e ing r screed nd ger
s e ing elemen s pring-m n ed p s ing r ller y ke
cen r l elec rics, ser ice BOMAG
eller ld
nd l c de displ y D- 6 4 pp
s c 6
ydr. pre- ensi ning cr ler D- 6 49 pp
r cks i erl d pr ec i n el. (0)6 4 -
(0)6 4 - 3
em e c n r l m eri l l 9 06 0 0 003 0
Dimensions in mm
Dimensions in mm
sens rs r m e l er l screed
A B H H2 K L W
BF 300 C A2200 B
40 3350 H600 0 H24950 Kc n r l pLnels
00 W
BF 300 C 2200 40 3350 600 0ec nic l cr n d
4950 00 s men
Shipping dimensions in m3
lec r -mec nic l sens rs r
BF 300 C, S 340-2 EV 22,394
BF 300 C, S 340-2 ETV 22,394 scr per el s
160
Shipping dimensions in m3 l r s nd sens rs r gers
BF 300 C, S 340-2 EV 22,394 en r l l ric i n r screed nd
TECHNICAL DATA
Technical
Technical
DataData BOMAGBOMAG BOMAGBOMAG
Technical Data Technical
Technical
DataData BOMAG BOMAGBOMAG
BF 300
BFBOMAG
300
C, SC,340-2
S 340-2
EV EVBOMAG
BF BOMAG
300
BF 300
C, SC,
340-2
S 340-2
ETVETV
Weights
Weights BF 300 C, S 340-2 EV BF 300
BFBF300
C,300
SC,340-2
C,S S340-2
340-2
EV EVETV
BF 300
BF 300
C, SC,
340-2
S 340-2
ETVETV
Weights Weights
per Weights
per
ing ing
eig eig ................................................
................................................
kg kg 8280 8280 8500 8500
per ing eig ................................................
per per ing ing
eig eig ................................................
................................................
kg 8280 kg kg 8280 8280
8500 8500 8500
Dimensions
Dimensions
Dimensions Dimensions
Dimensions
r nspr rnsp
leng
r leng
.............................................................
.............................................................
mm mm 4950 4950 4950 4950
r nsp r leng .............................................................
r nspr rnsp leng
idr leng
.............................................................
.............................................................
mm 4950
..............................................................
id ..............................................................
mm mm 4950
40 4950
4950
40 4950
40 4950
40
r nsp r id ..............................................................
r nspr rnsp eig id ..............................................................
mm 40
idr ..............................................................
.............................................................
eig .............................................................
mm mm 40 600
600 4040 40 600
600 40
r nspr rnsp eig r .............................................................
r nsp r eig .............................................................
eig .............................................................
mm 600 mm mm 600 600600 600 600
Travel
Travel
characteristics
characteristics
Travel characteristics
Travel
Travel
r characteristics
r el speed (characteristics
el speed (
) ..............................................................
) ..............................................................
km km 0-4,90-4,9 0-4,90-4,9
r el speed ( ) ..............................................................
Wr rking speed (
el speed (
Wr rking speed (
el speed () ..............................................................
) ..............................................................
km 0-4,9
) .......................................................... kmmin
) ..........................................................
m kmmin 0-4,9
m 0- 6 0-4,9
0-0-4,9
6 0-4,9
0- 6 0-4,9
0- 6
W rking speed ( ) ..........................................................
W rking speed (
W rking speed ( ) ..........................................................
m min 0- 6
) .......................................................... m min m min 0- 6 0-0-6 6 0- 6 0- 6
Drive
Drive
3 Drive Drive Drive
Asphalt
ngine m ngine mn cn rer ......................................................
c rer ...................................................... Kubota
Kubota Kubota
Kubota
0,136 ngine m n c rer ......................................................
ngine m ngine mn cn rer ......................................................
c rer ......................................................
Kubota
Type ................................................................................
Type ................................................................................ Kubota
330Kubota
Kubota
330 Kubota
330Kubota
330
Type ................................................................................
Type ................................................................................
missi Type ................................................................................
missi 330
n s ge ...............................................................
n s ge ............................................................... 330
ge 330330
3
ge 3 330
ge 330 3
ge 3
0,167 missi n s ge ...............................................................
missi missi
n s n s ge ...............................................................
ge
ge ...............................................................
ling ...........................................................................
ling ........................................................................... 3 ge
WaterWater ge
ge
3
3 3 ge
Water ge
Water 3 3
mling ...........................................................................
ling ...........................................................................
er mling ...........................................................................
cylinders
er cylinders Water
.......................................................
....................................................... Water4
4 Water
Water Water
4 Water
4
m er cylinders .......................................................
med per med p cylinders
er cylinders
er
3046 .......................................................
.......................................................
3046 4
...................................................
...................................................
kW kW 4
55,4 44
55,4 4 4
55,4 55,4
ed p er 3046 ...................................................
Rateded p
Rateded per er
3046 3046 ...................................................
kW 55,4
...................................................
speed ................................................................... min- kW
kW
speed ................................................................... min- 55,4 2200
2200 55,455,4 55,4 2200
2200 55,4
RatedRatedspeed ...................................................................
Rated speed ...................................................................
speed ...................................................................
min -
2200 min- min- 2200 22002200 2200 2200
Crawler
Crawlerassembly
assembly
ng bow, Crawler assembly Crawler
r Crawler
ler assembly
r r ler assembly
ck ..................................................................
r ck ..................................................................
r ler r ck ..................................................................
r -Axle
-Axle ler
r r ler ck ..................................................................
r ck ..................................................................
base ......................................................................
base ......................................................................
mm mm 2200 2200 2200 2200
-Axle base ......................................................................
-Axle-Width
-Width -Axle
base ......................................................................
base ......................................................................
mm 2200
.............................................................................
.............................................................................
mm mm 2200
60 2200
2200
60 2200
60 2200
60
dle -Width .............................................................................
-Width -Width
.............................................................................
.............................................................................
mm 60 mm mm 60 6060 60 60
Dimensions in mm Hopper
Hopper
e plate
Hopper Hopper
pH Hopper
ci y .........................................................................
p ci H1 y .........................................................................
H2 L 3 L1 W m3 m3 4,8 4,8 4,8 4,8
w oil p ci y .........................................................................
Widp Widci
( y .........................................................................
pings
ci
( y .........................................................................
ings m 4,8
pen) ......................................................... m3 mm
pen) .........................................................
mm m3 4,8 30
30 4,84,8 4,8 4,8
30 30
BP
Wid 10/35 Wid658 ( 962
ings cl pen)
ings cl 700
( ings pen) .........................................................
Wid
( ings ings pen) 1084 53230 350 mm mm
.........................................................
mm
.........................................................
sed) ......................................................
sed) ...................................................... 3040 3030
40 3040 3040
Wid (eng sed) ......................................................
Wid ( ings cl sed) ......................................................
Wid ings cl
( ............................................................................
ings cl sed) ......................................................
mm
BP 12/40 eng 658 962 700 1084 542 40400 mm mm
............................................................................ 40 660
660 4040 40 660
660 40
eng ............................................................................
illing eng
eng eig ............................................................................
illing mm 660
............................................................................
(middle) .....................................................
eig (middle) ..................................................... mm mm 660 540
540 660660 660 540
540 660
illing eig (middle) .....................................................
illing illing
eig (middle) .....................................................
eig (middle) .....................................................
mm 540 mm mm 540 540 540 540 540
Scraper
Scraper
beltbelt
/ auger
/ auger
Scraper belt / auger Scraper Scraper belt belt
/ auger / auger
Technical Data Number Number
...........................................................................
........................................................................... 2 2 2 2
Number ...........................................................................
Number Number
...........................................................................
Width .............................................................................. mm mm BOMAG
...........................................................................
2
Width .............................................................................. 2
220 2 2
220 BOMAG
2 2
220 220
Width ..............................................................................
Width ..............................................................................
Width ..............................................................................
mm 220 mm mm 220 220
220
Speed .............................................................................
Speed .............................................................................
m min m minBP
30 10/35
30 BP220 220
3012/40
30
Speed .............................................................................
Speed .............................................................................
Speed .............................................................................
ndi idndi l c id n l c m min 30
r l ............................................................ m min
n r l ............................................................ m min 30 nd 30
30rdnd rd 30 nd30rdnd rd
ndi id l c n r l ............................................................
ndi idndi
e ersing l c
id per
e ersing n l c
r l ............................................................
i nn .......................................................
per r l ............................................................
nd rd
i n ....................................................... nd rdndndrdrd nd rdnd rd
Weights
e ersing per i n .......................................................
e ersing
e ersing per per i n .......................................................
nd rd
i n ....................................................... nd rdndndrdrd nd rdnd rd
Operating weightConveyor
CECEConveyor auger auger
........................................... kg 65 72
Conveyor
Basic auger
weight Conveyor
Conveyor auger auger
->Number .......................................................................
->Number .......................................................................
............................................................. kg 2 2
64 712 2
->Number .......................................................................
-->Number .......................................................................
-->Number .......................................................................
ger di ger di 2
me er ...........................................................
me er ...........................................................
mm mm 280 2 2
2802 2 2
280 280
- ger di
Dimensions me er ...........................................................
-->Rated -
ger di
->Ratedger di
me me er ...........................................................
mm 280
er ...........................................................
speed ............................................................... mm
speed ...............................................................min min 00 280
mm 280 280
00 00 280
280 00
->Rated speed ...............................................................
->Rated
- e -->Rated speed ...............................................................
ersing
e speed ...............................................................
ersing
per per min 00
i n .................................................... min min 00nd 00
i n .................................................... rd00
nd rd 00nd 00
rdnd rd
Working width ..........................................................
- e ersing per i n ....................................................
- e - ersing e ersing
per per i n ....................................................
mm
i n ....................................................
nd rd
350nd rdndndrdrd
400 nd rd nd rd
Screed
Screed
Screed Characteristics
Driving Screed
creed Screed
creed
ype ....................................................................
ype .................................................................... S 340-2
S 340-2
EV EV S 340-2
S 340-2
ETV ETV
creed ype ....................................................................
Working speed, max. creed
sic creed
ype ....................................................................
ype ....................................................................
...............................................
sic
id re
id r re S 340-2 EV m/min
c ed ..................................................... mm mm 25
r c ed ..................................................... S 340-2
00 S S
340-2
00EV
340-2
EVETV 25S 340-2
00 S 340-2
ETV ETV
00
sic id re r c ed .....................................................
Max. gradeability (dep. on sic sic
id re
id r
e soil re
c ed .....................................................
ended r c
e ended ed .....................................................
mm 00
.....................................................
con.) mm
.....................................................
........................ % mm 3400 340000
3000 00 00 3400
303400 00
sic id e ended .....................................................
sic
. sic
id . eid
rking ended
id e ........................................................
rking ended
id.....................................................
.....................................................
mm 3400 mm mm
........................................................ 3400 3400
3400
5000 5000 3400 3400
5000 5000
Drive in. . id in. rking id i ........................................................
. rking id ........................................................
. idi rking
red cidi n skids .....................................
red ........................................................
mm 5000
c i n skids ..................................... mm mm 5000
0 5000
5000
0 5000
0 5000
0
in. id i red c i n skids .....................................
in. . id in. . id i red
i red c i n skids .....................................
c i n skids .....................................
mm
ickness ................................................................ 0
ickness ................................................................ mm mm 0 250
250 00 0 250
250 0
Engine manufacturer ................................................ Honda Honda
m . m ickness ................................................................
. ickness ................................................................
. ickness ................................................................
mm 250 mm mm 250 250
250
Type ing pl ing pl
e depe dep
......................................................................... ...................................................
................................................... 330 330
GX 120 GX250 250
330 330
120
m ing pl e dep ...................................................
m ming pling pl e dep
e ickness e dep
e ...................................................
ickness ...................................................
mm 330
............................................. mm mm
............................................. 330 330330 330 330
Emission
m
stage .........................................................
ing pl e ickness m . ............................................
m ing pl ing pl
e ickness
e ickness
. ............................................
mm. ............................................
mm mm
StageV/CARB P.3 StageV/CARB P.3
e ing ...........................................................................
e ing ........................................................................... lec riclec ric lec riclec ric
Cooling .....................................................................
e ing ...........................................................................
e re ing ...........................................................................
r ing ........................................................................... lec ric
n .............................................................................
n .............................................................................
air
-3lec
…ric
-3lec
+4,5
…lec
ricric
+4,5
air-3lec
…ric
-3lec
…ric
+4,5 +4,5
Number of cylinders rmper .................................................
r n .............................................................................
n .............................................................................
rmper
ren .............................................................................
ency
re .ency -3 … +4,5 Hz Hz
..........................................................
...........................................................
1-3 …-3+4,5-3
…… +4,5
+4,5 1 -3
0-30…0-30
-3
+4,5
… +4,5
Performance SAEi mper Jr 1349 n rrerei n ........................................
mper re ency ...........................................................
i i mper rere .ency
ency kW
...........................................................
Hz
..........................................................
ency ........................................................
ency ........................................................ Hz Hz 2,6
20-5020-500-30 2,6
0-30 0-30
20-5020-50
Speed .......................................................................
i r i n re ency ........................................................
i sic
r i i n r re
sic
eig i n eigency ........................................................
re ...................................................................
ency ........................................................
Hz 20-50
................................................................... min-1
Hz
kg Hz kg 3.600
20-50
00 20-50
20-50
00 3.600
20-500 20-500
Drive system ............................................................
sic eig ...................................................................
sic sic eig eig ...................................................................
...................................................................
kg 00 kg kg mech. 00 00 0 mech. 0 0
Filling Filling capacities capacities
Fuel ..........................................................................
Filling capacities Fuel Filling Filling
Fuel capacities capacities
.................................................................................
................................................................................. l l
Gasoline
00 00
Gasoline
00 00
Fuel comsump. aver. during
ydr il lic
operation
Fuel .................................................................................
Fuel l ....................
ydr.................................................................................
Fuel lic .................................................................................
00
....................................................................
l/h
il ....................................................................
l l
0,9
8000 80 0000 0,9
8000 80 00
ydr lic il ....................................................................
ydr ydr lic il lic
....................................................................
il ....................................................................
l 80 l l 80 8080 80 80
Exciter system Operating/control Operating/control elements elements
Operating/control
Frequency elements
Operating/control
Number Operating/control
Numberof drier's
of drier's elements elements
seats..................................................
seats..................................................
................................................................ Hz 90 90
Number of drier's seats..................................................
Number
ide Number
ie
ide of ........................................................................
drier's
ie of ........................................................................
drier's
seats..................................................
seats..................................................
Centrifugal force ....................................................... kN 10nd rdnd rd 12 nd rdnd rd
ide ie ........................................................................
ide System ...................................................................
LCS ie
ide .System ...................................................................
LCS .......................................................................
ie ........................................................................
nd rd nd rdndndrdrd
Amplitude ................................................................. mm 1,33 1,42nd rdnd rd
LCS System ...................................................................
LCS
ec ni System ...................................................................
LCS
l m
ec nidiSystem ...................................................................
l m
ic i dins reser
ic i ns reser
ed. ed.
c ines m
c ines m n i nd
y e s y e s n p rd
ii ns.
p i ns. nd rdndndrdrd nd rdnd rd
Capacities
ec ni l m di ic i ns reser ed. ecc niines m
l m
ec ni
diy l m
ic e s
i dins reser
ic n i ns reser
i ed.
p i ns.
ed.
c ines m
c ines m
y e s y e s
n i n p ii ns.
p i ns.
161
PAVER Standard equipment
D
O
BF 300 P er l se nd pl
ide ie ys em (p .)
rm d s men ,
-r , ydr. il le, 4- ld r
lig ing
. . . creed relie sys em
n nced r c i n n s gr nd
e r eels 3 .
ndi id lly c n r lled pper ings
e ersi le nd indi id lly c n r lled
scr per el s
e ersi le nd indi id lly c n r lled
gers
n in s mper nd i r i n
d s men
lly m ic screed e ing
s e ing elemen s
cen r l elec rics, ser ice
nd l c de displ y
em e c n r l m eri l l
sens rs r m e l er l screed
c n r l p nels
ec nic l cr n d s men
lec r -mec nic l sens rs r
scr per el s
l r s nd sens rs r gers
Fields of application:
en r l l ric i n r screed nd
The road paver BF 300, a machine which is suited for the ger
inner-city reconstruction measures as well as for the rural
road construction. Based on itsStandard
compactequipment
design, also con- Optional equipment
struction works in restricted areas
are optimally
D possible. ll- eel dri e
er l se nd pl
The unexampled versatility of the BF 300 offers bestrm d s men ,
appli- creed e ensi n 30 cm, 0 cm
ide ie ys em (p .) (3.4 m .0 m)
cation possibilities in the construction
of
-r cycle paths
, ydr. as wellld r
il le, 4- le ning ki
as in landscaping projects. lig ing ydr. ger li ing
. . . creed relie sys em l r s nd sens rs r scr per el s
n nced r c i n n s gr nd ydr. cr n d s men
PRE 891 05 010
e r eels 3 . p i n l p in inis
ndi id lly c n r lled pper ings l r s nd r elec r -mec nic l
e ersi le nd indi id lly c n r lled le elling sys ems
scr per el s r ss-sl pe le elling sys em
e ersi le nd indi id lly c n r lled lec ric side pl e e ing r screed
gers S340E
n in s mper nd i r i n m ic cen r l l ric i n sys em
d s men r screed nd ger
lly m ic screed e ing pring-m n ed p s ing r ller y ke BOMAG
s e ing elemen s eller ld
D- 6 4 pp
cen r l elec rics, ser ice s c 6
D- 6 49 pp
nd l c de displ y el. (0)6 4 - 0
em e c n r l m eri l l (0)6 4 - 3
PRE 891 05 010 100317 Sa01
Dimensions
Dimensions in in
mmmm sens rs r m e l er l screed
A B H H2 K L Wc n r l p nels
A B3350 H H24950 K L W
BF 300 P 2230 1740 600 170 ec nic l cr n d s men
1700
BF 300 P 2230 1740 3350 600 170 4950 1700
lec r -mec nic l sens rs r
Shipping dimensions in m3
BF 300 P, S 340-2 EV 22,394
3 scr per el s
Shipping dimensions in m
BF 300 P, S 340-2 ETV 22,394
162 l r s nd sens rs r gers
BF 300 P, S 340-2 EV 22,394
en r l l ric i n r screed nd
BF 300 P, S 340-2 ETV 22,394
ger
TECHNICAL DATA
Technical
Technical
DataData BOMAG
BOMAG BOMAG
BOMAG
Technical Data Technical
Technical
DataData BOMAG BOMAG
BOMAG
BOMAG
BF 300
BF 300
P, S P,
340-2 EV EVBOMAG
S 340-2 BOMAG
BF 300
BF 300
P, S P,
340-2
S 340-2
ETVETV
Weights
Weights BF 300 P, S 340-2 EV
BF 300
BF
BF300
P,300
S P,
340-2
P,SS340-2
340-2
EV EVETV
BF 300
BF 300
P, S P,
340-2
S 340-2
ETVETV
Weights Weights
Weights
per per
ing ing
eig eig ................................................
................................................
kg kg 7780 7780 8000 8000
per ing eig ................................................
per per ing ing eig eig ................................................
................................................
kg 7780 kg kg 7780 7780
8000 8000 8000
Dimensions
Dimensions
Dimensions Dimensions
Dimensions
r nspr rnsp
leng
r leng
.............................................................
.............................................................
mm mm 4950 4950 4950 4950
r nsp r leng .............................................................
rr nsp
nsprr rrnsp
nsp
leng
idrr leng
.............................................................
.............................................................
mm 4950
.............................................................. mm mm
id ..............................................................
mm mm 4950 1740
1740 4950
4950 4950 4950
1740 1740
rr nsp
nsprr rrnsp idrr ..............................................................
r nsp r id ..............................................................
nsp eig id ..............................................................
mm 1740
.............................................................
eig mm mm
.............................................................
mm mm 1740
600 1740
1740
600 1740
600 1740
600
r nsp r eig .............................................................
r nsp r
nner nner rnsp eig
r ck rr di r .............................................................
eig .............................................................
mm 600
ck rs ........................................................... mm
mm mm
di s ........................................................... mm 600 600
600
2385 2385 600 600
2385 2385
nner r ck r di s ...........................................................
nner er nner
rr ck r
er
ck r rr di
ck r
di
ck rs ...........................................................
di
di s ...........................................................
mm 2385
s .......................................................... mm mm
s ..........................................................
mm mm 2385 2385
4750 2385
4750 2385 2385
4750 4750
er r ck r di s ..........................................................
er r er
ck rr di ck rs ..........................................................
di s ..........................................................
mm 4750 mm mm 4750 4750
4750 4750 4750
Travel
Travel
characteristics
characteristics
Travel characteristics
Travel
Travel
characteristics
TravelTravel
characteristics
speedspeed
(1) ..............................................................
(1) ..............................................................
km km 0-6,30-6,3 0-6,30-6,3
Travel speed (1) ..............................................................
TravelTravel
Travel Travel
speedspeed
speed speed
(1) ..............................................................
(1) ..............................................................
km 0-6,3
(2) .............................................................. km km
(2) ..............................................................
km km 0-6,30-15
0-15 0-6,3
0-6,3 0-6,30-6,3
0-15 0-15
3 Travel speed (2) ..............................................................
Travel speed
Travel (2) ..............................................................
speed (2) ..............................................................
km 0-15 km km 0-15
m min 0-41 0-15
0-15 0-15
0-41 0-15
Asphalt
W rking speed (
W rking speed ( ) ..........................................................
) ..........................................................
m min 0-41 0-41
W rking speed ( ) ..........................................................
W rking speed (
W rking speed (
W
W rking speed (
rking speed ( ) ..........................................................
) .......................................................... m min
min
) ..........................................................
m min 0-41
) ..........................................................
m m
m min 0-41 0-41
min 0-129 0-41
0-129 0-41 0-41
0-1290-129
0,136 W rking speed ( ) ..........................................................
W rking speed ( ) ..........................................................
W rking speed ( ) ..........................................................
m min 0-129 m min m min 0-1290-129
0-129 0-1290-129
DriveDrive
0,167 Drive DriveDrive
ngine m
ngine m
n cn rer ......................................................
c rer ...................................................... Kubota
Kubota Kubota
Kubota
ngine m n c rer ......................................................
ngine m ngine mn cn rer ......................................................
c rer ......................................................
Kubota
Type ................................................................................
Type ................................................................................ Kubota
V3307Kubota
Kubota
V3307
T T Kubota
V3307Kubota
V3307
T T
Type ................................................................................
Type ................................................................................
missi Type ................................................................................
missi V3307 T
n s ge ...............................................................
n s ge ............................................................... V3307 T ge
V3307 T T 3
ge V3307 3 V3307
ge T ge
V3307 T 3 3
missi n s
missi n s ge ...............................................................
missi ge ...............................................................
n s ge ...............................................................
ge
ling ...........................................................................
ling ........................................................................... 3 ge
Water ge
Water ge
3 3 3 ge
Water ge
Water 3 3
ling ...........................................................................
ling ...........................................................................
m er m cylinders
er cylinders Water
ling ...........................................................................
.......................................................
....................................................... Water
4 Water
4 Water Water
4 Water
4
m er cylinders .......................................................
med per m cylinders
ed per cylinders
er er .......................................................
3046 .......................................................
3046 4
...................................................
...................................................
kW kW 4
55,4 4 4
55,4 4
55,4 4
55,4
ed p er Rated ed p
Rated 3046 ...................................................
3046 ...................................................
ed per er 3046 ...................................................
kW 55,4
speed ................................................................... kW
min-1 kW
speed ................................................................... min-1 55,4 2200
2200 55,4
55,4 55,4 2200
2200 55,4
ng bow, RatedRated speed ...................................................................
Rated speed ...................................................................
speed ...................................................................
min-1 2200 min-1 min-1 2200 2200
2200 2200 2200
Crawler
Crawlerassemblyassembly
Crawler assembly Crawler
Crawler
Rear Rear
assemblyassembly
tyres .......................................................................
tyres .......................................................................
dle Rear tyres .......................................................................
Rear Rear
tyres .......................................................................
tyres .......................................................................
Dimensions in mm -Number .........................................................................
-Number ......................................................................... 2 2 2 2
e plate -Number .........................................................................
-Number .........................................................................
-Type -Number .........................................................................
-Type 2
...............................................................................
............................................................................... 23 23.2 . 23 23. .
w oil r nH
-Type -Type H1 H2 L
-Type ............................................................................... L1 3 W.
n ...............................................................................
...............................................................................
ryres ......................................................................
yres ...................................................................... 3 3. 3 . . 3 3. .
r n yres ......................................................................
r n -Number .........................................................................
ryres ......................................................................
n yres ......................................................................
-Number ......................................................................... 4 4 4 4
BP 10/35 -Di
658
me
-Dier me
962 700 1084 5324 350 mm mm
-Number .........................................................................
-Number .........................................................................
-Number .........................................................................
........................................................................
er ........................................................................ 4
470 4 4
470 4
470 4
470
-Di me er ........................................................................
-Di
-Width me
-Di er
-Width me
........................................................................
er ........................................................................
mm 470
............................................................................. mm mm
............................................................................. 470 470
470 470 470
BP 12/40 -Width
658
-Width
962 700 1084
-Width .............................................................................
542280 400 mm
.............................................................................
.............................................................................
mm mm mm
mm 280
280
280
280
280
280
280
280
280
Hoppe
Hoppe
Hoppe Hoppe
Hoppe
p ci y .........................................................................
p ci y .........................................................................
m3 m3 4,8 4,8 4,8 4,8
p ci y .........................................................................
Widp Wid ci
( y .........................................................................
pings
ci
( y .........................................................................
ings m3 4,8
pen) ......................................................... m3 mm
pen) .........................................................
mm m3 4,8
3075 4,8
4,8
3075 4,8 4,8
3075 3075
Technical
Wid ( ings pen) Data Wid Wid
Wid ( ings
( ings cl
( pen)
ings cl .........................................................
.........................................................
Wid ( ings pen) .........................................................
mm 3075
sed) ...................................................... mm mm
sed) ......................................................
mm mm 3075 1740
1740
BOMAG3075
3075 3075 1740
1740
BOMAG 3075
Wid ( ings cl sed) ......................................................
Wid Wid
eng eng ( ings cl
( ings cl
sed) ......................................................
sed) ......................................................
mm 1740
............................................................................ mm
............................................................................
mm mm mm 1740 1740
1740
660 660 1740
660 1740
660
eng ............................................................................
eng
illing eng
............................................................................
eig ............................................................................
illing mm 660
(middle) .....................................................
eig (middle) ..................................................... mm mm
mm mm 66010/35
BP
540 660
540660 660
BP540 660
12/40
540
illing eig (middle) .....................................................
illing illing
eig (middle) .....................................................
eig (middle) .....................................................
mm 540 mm mm 540 540540 540 540
Scraper
Scraper
beltbelt
/ auger
/ auger
Scraper belt / auger
Weights Scraper Scraper beltbelt / auger / auger
n i y ..........................................................................
n i y .......................................................................... 2 2 2 2
n i y ..........................................................................
Operating nWidth ..............................................................................
i y ..........................................................................
n i ...........................................
y ..........................................................................
2
weightWidth ..............................................................................
CECE kg mm 220
mm 2
65 22
220 2
72220 2
220
Width ..............................................................................
Width .............................................................................. mm
Width ..............................................................................
mm 220 m min 220
mm 220
30220
Basic weight RatedRated speed ...................................................................
speed ...................................................................
.............................................................
Rated speed ...................................................................
RatedRated speed ...................................................................
m
kg
speed ...................................................................
m min 30
min
m min
30
64
m min 30
71220
30 220
30
ndi idndi l c id n l cr l ............................................................
n r l ............................................................ nd3030
rdnd rd 30 nd30rdnd rd
ndi id l c n r l ............................................................
e ersing ndi idndi l c
e ersing
per per id n l cr l ............................................................
n r l ............................................................
nd rd
i n .......................................................
i n ....................................................... nd rd
nd rdnd
ndndrd
rdrd nd
nd rd
rdnd
nd rd
rd
Dimensions
e ersing per i n .......................................................
e ersing e ersing
per per i n .......................................................
i n .......................................................
nd rd nd rdndndrdrd nd rdnd rd
Working width ConveyorConveyor auger auger
.......................................................... mm 350 400
Conveyor auger Conveyor Conveyor auger auger
->Number .......................................................................
->Number ....................................................................... 2 2 2 2
->Number .......................................................................
->Number .......................................................................
- ->Number .......................................................................
ger di
- ger di 2
me er ...........................................................
me er ...........................................................
mm mm 2
280 2 2
280 2
280 2280
Driving
- Characteristics
ger di me er ...........................................................
-
->Rotary-->Rotary
ger di ger di me er ...........................................................
mm 280
mespeed ..............................................................
er ...........................................................
speed .............................................................. mm minmmmin 280 280
100 280
100 280 280
100 100
Working speed, max. ...............................................
->Rotary speed ..............................................................
-->Rotary
e -->Rotary
espeed ..............................................................
ersing speed ..............................................................
ersing
per per min 100
i n .................................................... m/min
min min
i n .................................................... 25nd100
100 100
rdnd rd 25100nd100rdnd rd
- e ersing per i n . ...................................................
- e - ersing
e ersing
per
Max. gradeability (dep. on soil con.) ........................ %per
i n . ...................................................
i n . ...................................................
nd rd 30 rdndndrdrd
nd 30 nd rdnd rd
Screed
Screed
Screed Screed
creed
Screed
creed
ype ....................................................................
ype .................................................................... S 340-2
S 340-2
EV EV S 340-2
S 340-2
ETV ETV
Drive
creed ype ....................................................................
creed
sic creed ype ....................................................................
sic
id reype ....................................................................
id r re S 340-2 EV mm mm
c ed .....................................................
r c ed ..................................................... S 340-2
1700 S S340-2
1700 EV
340-2EVETV S 340-2
1700 S 340-2
1700ETV ETV
sic id re
Engine manufacturerr c ed .....................................................
sic sic
id
id eid rended
re
id re
c ed .....................................................
rended
.c....................................................
ed .....................................................
sic ................................................
sic e mm 1700 mm
mm mm
..................................................... mm 1700
Honda 1700
3400 34001700 1700
Honda 1700
3400 3400
sic id e ended .....................................................
sic . sic
id . eid
rking ended
id e ........................................................
rking ended
id.....................................................
.....................................................
mm 3400 mm mm
........................................................
mm mm 3400 4400
4400 3400
3400 3400 3400
Type .........................................................................
. rking id ........................................................
. rking
. rking
id ........................................................
id ........................................................
mm 4400 mm
GX 120 GX4400 4400
120
in. id in. idi red i red cing skids ......................................
cing skids ...................................... mm mm mm 4400
750 4400
7504400 4400
750 4400
750
Emission
in. id i stage .........................................................
red cing skids ......................................
in. . eig
idin. . .....................................................................
idi red
eig .....................................................................
i redcing skids ......................................
cing skids ......................................
mm 750 mm mm
mm mm StageV/CARB
750 250
250 750750 P.3 StageV/CARB
750 750
250 250
P.3
Cooling .....................................................................
. eig .....................................................................
m . eig . .....................................................................
ming pl eig
ing pl .....................................................................
e dep e dep mm 250
................................................... mm mm
...................................................
mm mm air
250 330
330 250250 air330
250 250
330
m ing pl
Number of cylinders e dep
. ..................................................
m m ing pl ing pl
e dep e dep . ..................................................
m .................................................
ming pling pl e ickness e ickness . ..................................................
mm 330
............................................. mm
mm mm
............................................. mm 330
12 12330
1 330 1 330
12 12 330
m ing pl e ickness m e ickness
e.............................................
meing pl ing pl e ickness .............................................
mm.............................................
12
ing ...........................................................................
ing ........................................................................... mm mm 12 12
lec ric12 ric
lec 12 12
lec ric
lec ric
Performance SAE J 1349 ........................................
e ing ...........................................................................
e
kW 2,6 2,6
r ing ...........................................................................
e
r ing ...........................................................................
lec ric
n .............................................................................
n ............................................................................. -3lec
…ric
-3lec
+4,5lecric
… ric
+4,5 -3lec
…ric
-3lec
…ric
+4,5 +4,5
Speed .......................................................................
r n .............................................................................
rmper n .............................................................................
rmper
ren .............................................................................
ency
re .ency -3 … +4,5 Hz Hz
..........................................................
min-1
...........................................................
3.600
-3 …-3+4,5
-3……+4,5 +4,5 3.600
-3 …-3
0-30 +4,5
0-30… +4,5
Drive
mper system ............................................................
re ency ...........................................................
i mper
r i i mper
rrere
n i n ency
reency ........................................................
re .ency
..........................................................
...........................................................
Hz
ency ........................................................ Hz Hz
Hz Hz mech. 0-30
20-5020-50 mech.
0-30 0-30
20-50 20-50
i r i ..........................................................................
Fuel n re ency ........................................................
r i i n
i sic r
sic i
re
eig eig n re ency ........................................................
Hz 20-50
ency ........................................................
...................................................................
................................................................... kg Hz
Hz kg 20-50 20-50
Gasoline
1500 150020-50 1720 20-50
20-50
Gasoline 1720
sic comsump.
Fuel eig ...................................................................
aver. sic sic eig eig
during ...................................................................
.operation
..................................................................
kg ....................
1500 kg
l/h kg 1500
0,9 15001720 1720 1720
0,9
Filling Filling
capacities capacities
Filling capacities Filling
Filling
capacities
capacities
Fuel .................................................................................
Fuel .................................................................................
l l 100 100 100 100
Exciter system Fuel
Fuel .................................................................................
ydr.................................................................................
Fuel
lic .................................................................................
ydr il lic l 100
.................................................................... ll
il .................................................................... ll 100 80
80 100
100 100 100
80 80
ydr lic il ....................................................................
Frequency ydr ydr lic il lic
....................................................................
il ....................................................................
................................................................ l 80 lHz l 80
90 8080 9080 80
Operating/control
Operating/control elements elements
Operating/control
Centrifugal forceelements
Operating/control
Operating/control elements elements
.......................................................
Number Numberof driver’s
of driver’sseatsseats
kN 10
1 1
121 1
Amplitude
Number of driver’s .................................................................
seats Number
ide Number
ie of driver’s
ide ie of driver’s seatsseats 1 mm 1,33
1 nd1 1rdnd rd 1,42
1 nd1 rdnd rd
ide ie ide ys
ie
ide emie em
ys nd rd nd
nd rdrdnd
ndndrd
rdrd nd
nd rd
rdnd
nd rd
rd
ys em
Capacities ys em
ys em nd rd nd rdndndrdrd nd rdnd rd
ec nic ec
l mnic
di l m
ic i dins reser
ic i ns reser
ed. ed.
c ines m
c ines m
y e s y e s
n i n p ii ns.
p i ns.
Fuel ..........................................................................
ec nic l m di ic i ns reser ed. ec cnic
ines m
ec
l mnic
diy l m
ice s
i dins reser
ic n i ns reser
i ed.
p i ns.
ed.
c ines m
c ines m
y e s y e s pli ns.
n i n p ii ns. 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
163
PAVER Standard Equipment
Operator compartment
Optional
Operato
BF 300 C-2 D W
Dri er s se i s i el nd side-s i
We
e
D s rd pr ec i n sp
ydr lic inged r Tractor
Digi l displ y r m c ine n gemen en r
Tractor p i
D i l g
ep r e c n r l pper ings ydr
ydr lic, eig d s le ger pring
r ck scr per Screed
pr p r i n lly c n r lled nd re ersi le ydr
e r-resis n c s gers scre l des inge
sep r ely repl ce le Heate
independen nd re ersi le scr per el s . .
ig - e r resis n pl es 340
er r ck p ds 350 m
Screed 500 m
. . . creed relie nd r c i n incre se ed c
system Levelling
creed emper re c n r l eig
MAGMALIFE l mini m e ing pl es me n
MAGMALIFE m ic screed e ing sens
ec nic l screed l ck
Other
r n d s men
lee m
ide c n r l ger scr per el s
n
Other D
Tools
rk lig s
ree p se ener r
Fields of application: cke 40 l
164
TECHNICAL DATA
Technical Data BOMAG
Technical Data Technical Data BOMAG BOMAG
BF 300 C-2
Weight CECE BF 300 C-2 BF 300 C-2
Weight CECE Weight CECE
Wi 340- screed 340- screed ................... kg 0 9000
Wi 340- screed Wi
340- 340-
screed
screed
...................
340- kg screed ...................
0 9000 kg 0 9000
Dimensions
Dimensions Dimensions
r nsp r leng ............................................................. mm 5050
r nsp r leng .............................................................
r nsp r leng .............................................................
mm 5050
id .............................................................. mm 5050
1880
r nsp r id ..............................................................
r nsp r eig id ..............................................................
mm 1880
............................................................. mm 1880
3270
r nsp r eig .............................................................
r nsp r eig .............................................................
mm 3270 mm 3270
Travel characteristics
Travel characteristics
Travel
Travel characteristics
speed ................................................................... km 0-5
Travel speed ...................................................................
Travel
W speed ...................................................................
km 0-5
rking speed ............................................................... kmmin-1
m 0-5 variable
0-20
W rking speed ...............................................................
W rking speed ...............................................................
m min-1 0-20 variablem min-1 0-20 variable
3 Drive
Asphalt
Drive Drive
ngine m n c rer ...................................................... Kubota
0,136 ngine m n c rer ......................................................
ngine m n c rer ......................................................
Kubota
Type ................................................................................ Kubota
V3307-CR-T-EU4
Type ................................................................................
Type ................................................................................
V3307-CR-T-EU4
missi n s ge ............................................................... V3307-CR-T-EU4
ge 4
0,167
missi n s ge ...............................................................
missi n s ge ...............................................................
ge
ling ........................................................................... 4 li ge
id 4
ling ...........................................................................
mling ...........................................................................
li id
er cylinders Displ cemen .............................. cm3 li 333
4 id
m er cylinders Displ m cemen
er cylinders
..............................
Displ cemen
cm 3
..............................
4 333
ed p er ................................................................... kW cm3
4 4,6
333
ed p er ...................................................................
ed p er ...................................................................
kW 4,6 kW 4,6
Crawler assembly
Crawler assembly Crawler
l leng assembly
..................................................................... mm 2273
ng bow, l leng .....................................................................
l leng .....................................................................
mm 2273
Width .............................................................................. mm 2273
60
Width .............................................................................. 60
Width ..............................................................................
mm mm 60
Hopper
dle Hopper Hopper
p ci y ......................................................................... m 3
4,8
Dimensions in mm
e plate p ci y .........................................................................
Widp ci ( y .........................................................................
m 3
4,8
ings pen) ......................................................... m
mm
3
4,8
3080
w oil Wid H ( ings H1
ings cl H2 Lmm L1 3080W
Wid ( ings pen) .........................................................
pen) .........................................................
sed) ...................................................... mm 3080
2270
Wid ( ings cl sed) ......................................................
Wid
eng ( ............................................................................
ings cl sed) ......................................................
mm 2270 2270
BP 10/35 658 962 700 1084 532 350 mm 1800
eng ............................................................................
eng
illing ............................................................................
mm 1800
eig (middle) ..................................................... mm 1800
515
illing
BP eig (middle) .....................................................
12/40 illing
658eig 962 (middle) .....................................................
700 1084 mm 542515 400 mm 515
Conveyor
Conveyor Conveyor
Number ........................................................................... 2
Number ...........................................................................
Number
Rotary ...........................................................................
2
speed .................................................................. min 2
33
Technical Data Rotary
Rotary speed ..................................................................
ndi id speed ..................................................................
min 33
l c n r l ............................................................ min 33 nd rd
BOMAG BOMAG
ndi id l c n r l ............................................................
ndi id l c n r l ............................................................
nd rd
e ersing per i n ....................................................... yesnd rd
e ersing per i n .......................................................
e ersing per i n .......................................................
yes yes 10/35
BP BP 12/40
Auger
Auger Auger
Number ........................................................................... mm 2
Weights
Number ...........................................................................
Number
ger di...........................................................................
mm 2
me er ............................................................... mm 2
280
Operating
ger di me er .weight CECE
Rotary me...........................................
..............................................................
ger di er ...............................................................
mm 280
speed .................................................................. kg
mm
min 65
280
117 72
Basic weight .............................................................
Rotary speed ..................................................................
Rotary
e ersing per i n ....................................................... min
speed ..................................................................
min 117 kg 64
117nd rd 71
e ersing per i n .......................................................
e ersing per i n .......................................................
nd rd nd rd
Dimensions Screed S340-2
Screed Screed S340-2
sic id re r c ed ..................................................... mm S340-2
1700
Working width ..........................................................
sic id re r c ed .....................................................
sic id re e rended
c ed .....................................................
mm 1700
..................................................... mm
mm 350
1700
3400 400
sic id e ended .....................................................
sic idid ei red
in. ended c .i....................................................
mm 3400
n skids ..................................... mm 3400
700
Driving
in. id Characteristics
i red c i n skids .....................................
in. ickness .................................................................
id i red c i n skids .....................................
mm 700 mm 700
250
Working speed, max. ...............................................
ickness .................................................................
ickness .................................................................
creed pl mm 250
e dep ......................................................... m/min
mm 25
250
330 25
Max.
creed plgradeability (dep. on
creed pl e dep
e soil con.)
e dep ......................................................... ........................
.........................................................
ickness mm 330
................................................... %
mm 30
330
12 30
creed pl e ickness ...................................................
creed pl e ickness ...................................................
mm 12 mm 12
e ing ........................................................................... elec ric
Drive
e ing ........................................................................... elec ric
re ing ...........................................................................
n ............................................................................. elec ric 4,
- , ...
Engine manufacturer m r per ................................................
r n .............................................................................
n .............................................................................
- , ... 4, Hz
re ency .......................................................... Honda
- , ... 4,
0-29 Honda
Type
m per .........................................................................
re ency ..........................................................
m
i r per i n rere ency ..........................................................
Hz 0-29
ency ........................................................ Hz GX
0-29 120
20-58 GX 120
Emission
i r i n re stage .........................................................
ency ........................................................
i r i n re ency ........................................................
Hz 20-58
sic eig ................................................................... kg
Hz StageV/CARB
20-58
00 00
P.3 StageV/CARB P.3
Cooling
sic eig .....................................................................
...................................................................
sic . eig rking ...................................................................
kg 00 00 mm
id ........................................................ kg air 00 00
5000 air
Number
. rking of idcylinders . .................................................
........................................................
rking id ........................................................
mm 5000 mm 1
5000 1
Performance SAE Filling
J 1349 capacities
........................................ kW 2,6 2,6
Filling capacities Filling capacities
Fuel ................................................................................. l 95
Speed .......................................................................
Fuel .................................................................................
Fuel
ydr.................................................................................
l 95
lic il ....................................................................
min-1
l
3.600
95
80
3.600
Drive
ydr lic system ............................................................
il ....................................................................
ydr lic il ....................................................................
l 80 l mech.
80 mech.
Fuel ..........................................................................
ec nic l m di ic i ns reser ed. c ines m y e s n i p i ns.
Gasoline Gasoline
Fuel comsump. aver.
ec nic l m di ic i ns reser ed. ec cnic ines m
during
l m diy ice s
operation
i ns reser
n i ed.
p i ns.
....................
c ines m y e s n i p i ns.
l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
165
PAVER Standard Equipment
Operator compartment
Optional
Operator
BF 300 P-2 D W
Dri er s se i s i el nd side-s i
We
e
D s rd pr ec i n sp
ydr lic inged r Tractor
Digi l displ y r m c ine n gemen en r
Tractor p i n
D i l g
ep r e c n r l pper ings 4 6
ydr lic, eig d s le ger ydr
r ck scr per pring
pr p r i n lly c n r lled nd re ersi le le n
e r-resis n c s gers scre l des Screed
sep r ely repl ce le ydr
independen nd re ersi le scr per el s Heate
ig - e r resis n pl es . . .
6 eel dri e 340
Screed 3 0 m
. . . creed relie nd r c i n incre se 00 m
system ed c
creed emper re c n r l Levelling
l mini m e ing pl es eig
m ic screed e ing me ns
ec nic l screed l ck sens
r n d s men
Other
ide c n r l ger scr per el s lee m
Other n
Tools D
rk lig s
ree p se ener r
cke 40 l
Asphalt
W rking speed ............................................................... m min-1 0-129 variable
W rking speed ...............................................................
W rking speed ...............................................................
m min-1 0-129 variablem min-1 0-129 variable
0,136 Drive
Drive Drive
ngine m n c rer ...................................................... Kubota
0,167 ngine m n c rer ......................................................
ngine m n c rer ......................................................
Kubota Kubota
Type ................................................................................ 330 - - -
Type ................................................................................
Type ................................................................................
330 - - - 330 - - -
missi n s ge ............................................................... ge ier 4
missi n s ge ...............................................................
missi n s ge ...............................................................
ge ier 4 ge ier 4
ling ........................................................................... li id
ling ...........................................................................
ling ...........................................................................
li id li id
m er cylinders Displ cemen .............................. cm33 4 333
m er cylinders Displ m cemen
er cylinders
..............................
Displ cemen cm3 ..............................
4 333 cm 4 333
ed p er ................................................................... kW 4,6
ed p er ...................................................................
ed p er ...................................................................
kW 4,6 kW 4,6
ng bow, Undercarriage
Undercarriage Undercarriage
e r yres m er ....................................................... 2
e r yres m er .......................................................
e r yres m er .......................................................
2 2
dle Type ................................................................................ 3 .
Type ................................................................................
Dimensions in mm Type ................................................................................
3 . 3 .
r n yres m er ...................................................... 2
e plate r n yres m er ......................................................
r n yres m er ......................................................
2 2
Di me er ......................................................................... mm 470
w oil H er .........................................................................
H1 H2 Lmm L1 470 W
Di me er .........................................................................
Di me mm 470
Width .............................................................................. mm 280
Width ..............................................................................
BP 10/35 Width ..............................................................................
658 962 700 1084 mm 532280 350 mm 280
Hopper
Hopper Hopper
BP 12/40 p658
ci y .........................................................................
962 700 1084 542 400 m33 4,
p ci y .........................................................................
p ci y .........................................................................
m3 4, m 4,
Wid ( ings pen) ......................................................... mm 3080
Wid ( ings pen) .........................................................
Wid ( ings pen) .........................................................
mm 3080 mm 3080
Wid ( ings cl sed) ...................................................... mm 2270
Wid ( ings cl sed) ......................................................
Wid ( ings cl sed) ......................................................
mm 2270 mm 2270
Technical Data eng ............................................................................ mm
eng ............................................................................
eng ............................................................................
mm 1800
illing eig (middle) ..................................................... mm
mm
1800
1800
BOMAG BOMAG
illing eig (middle) .....................................................
illing eig (middle) .....................................................
mm mm
Conveyor BP 10/35 BP 12/40
Conveyor Conveyor
Number ........................................................................... 2
Number ...........................................................................
Number ...........................................................................
2 2
Weights Rotary speed .................................................................. min 33
Rotary speed ..................................................................
Rotary speed ..................................................................
min 33 min 33
Operating ndi id l c ...........................................
n r l ............................................................ kg nd rd
ndi id l c n r weight CECE
l ............................................................
ndi id l c n r l ............................................................
nd rd 65nd rd 72
Basic weight e ersing per i n ....................................................... kg
............................................................. yes
64 71
e ersing per i n .......................................................
e ersing per i n .......................................................
yes yes
Auger
Auger
Dimensions Auger
Number ........................................................................... mm 2
Number ...........................................................................
Number ...........................................................................
mm 2 mm 2
Working width ger di me er ............................................................... mm
.......................................................... mm 280
350 400
ger di me er ...............................................................
ger di me er ...............................................................
mm 280 mm 280
Rotary speed .................................................................. min 87
Rotary speed ..................................................................
Rotary speed ..................................................................
min 87 min 87
Driving Characteristics e ersing per i n .......................................................
e ersing per i n .......................................................
e ersing per i n .......................................................
nd rd
nd rd
nd rd
Working speed, max.
Screed ............................................... m/min 25 S340-2 25
ScreedgradeabilityScreed
Max. (dep. S340-2 S340-2
sic id on
re soil con.) ........................
r c ed ..................................................... %
mm 30
1700 30
sic id re r c ed .....................................................
sic id re r c ed .....................................................
mm 1700 mm 1700
sic id e ended ..................................................... mm 3400
sic id e ended .....................................................
Drive sic id e ended .....................................................
mm 3400 mm 3400
in. id i red c i n skids ..................................... mm 700
in. id i red c i n skids .....................................
in. id i red c i n skids .....................................
mm 700 mm 700
Engine manufacturer ................................................
ickness .................................................................
ickness .................................................................
ickness .................................................................
mm 0
mm
mm
Honda0
0
Honda
Type creed pl e dep ......................................................... mm
......................................................................... GX330 120 GX 120
creed pl e dep .........................................................
creed pl e dep .........................................................
mm 330 mm 330
Emission creed pl e ickness . .................................................. mm 12
StageV/CARB P.3 StageV/CARB P.3
creed pl e stage .........................................................
ickness ...................................................
creed pl e ickness ...................................................
mm 12 mm 12
Cooling .....................................................................
e ing ...........................................................................
e ing ...........................................................................
e ing ...........................................................................
elec ric
air
elec ric air
Number of cylinders r .................................................
n .............................................................................
r n .............................................................................
r n .............................................................................
- , ... 4,
1elec ric
- , ... 4,
- , ... 4,
1
Performance SAEm Jper
1349 re ency ..........................................................
........................................
m per re ency ..........................................................
m per re ency ..........................................................
Hz 0-29
Hz
kW
Hz
0-29
2,6
0-29
2,6
Speed i r i n re ency ........................................................ min-1
....................................................................... Hz 0-
3.600 3.600
i r i n re ency ........................................................ 0-
i r i n re ency ........................................................
Hz Hz 0-
Drive system ............................................................
sic eig ................................................................... kg
sic eig ...................................................................
sic eig ...................................................................
kg 00 00 kg
mech.00 00
00 00
mech.
Fuel . rking id ........................................................ mm
.......................................................................... 4400
Gasoline Gasoline
. rking id ........................................................
. rking id ........................................................
mm 4400 mm 4400
Fuel comsump. aver.
Fillingduring operation .................... l/h
capacities 0,9 0,9
Filling capacities Filling capacities
Fuel ................................................................................. l 9
Fuel .................................................................................
Exciter system Fuel .................................................................................
l 9 l 9
ydr lic il .................................................................... l 80
ydr lic il ....................................................................
Frequency ydr lic il ....................................................................
l
................................................................ 80 l
Hz 80
90 90
Centrifugal force .......................................................
ec nic l m di ic i ns reser ed. c ines m y e s n i p i ns.
kN 10 12
ec nic l m di ic i ns reser ed. ec cnic
ines m
l m di
y ice si ns reser
n i ed.
p i ns.
c ines m y e s n i p i ns.
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
167
PAVER Standard Equipment
Operator compartment
D W
Optional Equipment
Operator compartment
ydr lic elec ric m le
Tractor Tractor
D en r l l ric i n sys em
ep r e c n r l pper ings p i n l p in inis
le ning ki i l gic lly degr d le y
ydr lic, eig d s le ger ydr lic pper r n l
r ck scr per ydr lic s spended nd
pr p r i n lly c n r lled nd re ersi le push rollers
e r-resis n c s gers scre l des
sep r ely repl ce le Screed
independen nd re ersi le scr per ydr lic cr n d s me
el s ig - e r resis n pl es inged side pl es
er r ck p ds Heated side plates
. . . l -sided
Screed 00 600 e ensi ns
. . . creed relie nd r c i n incre se 250 mm
system 500 mm
creed emper re c n r l 750 mm
l mini m e ing pl es 1250 mm
m ic screed e ing ed c i n s es
ydr lic screed l ck dge s per 4 60
r n d s men
ide c n r l ger scr per el s Levelling systems
eig nd cr ss-sl pe se
Other me ns l r s nic r me
Tools sens rs
rk lig s
0 30 k gener r Other
cke 40 l lee m n gemen
n-lig ll n
performance strength and versatility. Thus, the machine is Digi l displ y r m c ine n gemen sp l s e m e r c i n
168
BOMAG
eller ld
TECHNICAL DATA
Technical Data BOMAG
Technical
Technical
Data Data BOMAG BF 600 C-2
BOMAG
Weight CECE
BF 600BF
C-2
600 C-2
WeightWi
CECE
Weight CECE i 600 screed ..............................................
00 screed kg 9 00 9 00
Wi 00 screed
Wi 00 screed
Dimensions i 600 screed ..............................................
i 600 screed .............................................. kg kg 9 00 99 00
00 9 00
Dimensions
Dimensions
r nsp r leng .................................................................................. mm 6360
rr nsp
r nsp r leng rr leng
id ...................................................................................
nsp ..................................................................................
..................................................................................
mm mm
mm6360 63600 3000
r nsp r rr nsp rr eig ..................................................................................
id ...................................................................................
nsp mm
id ................................................................................... mm 3061
mm 0 3000 0 3000
r nsp rTravel
r eig
nsp ..................................................................................
rcharacteristics
eig ..................................................................................
mm mm3061 3061
Travel Travel
Travel
characteristics
characteristics
speed ........................................................................................ km 0-4
W rking speed ....................................................................................
Travel speed ........................................................................................
Travel speed ........................................................................................
km m min
km 0-4
-1
0-25
0-4 variable
W rking speed ....................................................................................
W rking speed ....................................................................................
Drive m min-1 m min
0-25
-1
variable
0-25 variable
3
Asphalt
Drive Drive
ngine m n c rer ........................................................................... D
0,136 ngine mType .....................................................................................................
ngine m
n c rer ...........................................................................
n c rer ........................................................................... D D D 0 06
0,167 missi n s ge ....................................................................................
Type .....................................................................................................
Type ..................................................................................................... D 0 D ge 0 06
06 3
missi n smissi ling ................................................................................................
ge ....................................................................................
n s ge .................................................................................... ge li ge
id 3 3
mling ................................................................................................
er cylinders Displ cemen ....................................................
ling ................................................................................................ cmli id 6
3
li 6067
id
ed p
m er cylinders
m er Displ
........................................................................................
er cylinders cemen
Displ ....................................................
cemen ....................................................
cm3 kW 6 6067 6 6
cm3
6067
ed p Crawler
er
ed p
........................................................................................
er ........................................................................................
assembly kW kW 6 6
CrawlerCrawler
assembly
l leng assembly
.......................................................................................... mm 2975
ng bow, l lengWidth ...................................................................................................
..........................................................................................
l leng ..........................................................................................
mm mm
mm2975 300
2975
Width ...................................................................................................
Width ...................................................................................................
Hopper mm mm300 300
dle HopperHopper p ci y .............................................................................................. m3 7,0
Dimensions in mm
e plate Widp ci ( y ..............................................................................................
ings pen) ..............................................................................
p ci y .............................................................................................. m 3 mm
m3 7,0 3330
7,0
w oil Wid ( Wid
ings (
Wid ings cl
(pen)
ings .H H1 H2 L L1 W
sed) ...........................................................................
..............................................................................
pen) .............................................................................
mm mm
mm3330 2270
3330
Wid10/35 eng ( .................................................................................................
( Wid
ings cl sed) ...........................................................................
ings cl sed) ...........................................................................
mm mm
mm2270 00
2270
BP 658 962 700 1084 532 350
illing .................................................................................................
eig (middle) ..........................................................................
eng .................................................................................................
eng mm mm
mm 00 59000
BP 12/40
illing eig
illing 658 962 700 1084 542 400
(middle) ..........................................................................
Conveyor eig (middle) ..........................................................................
mm mm590 590
Conveyor
Conveyor
m er ................................................................................................ 2
Rotary speed .......................................................................................
m er ................................................................................................
m er ................................................................................................ min
2 64
2
Technical ndi id Data
Rotary l c n r l .................................................................................
Rotary speed .......................................................................................
speed .......................................................................................
min min
64 64 nd rd
e ersing
BOMAG BOMAG
ndi id l c l c per i n ............................................................................
ndi nidr l .................................................................................
n r l ................................................................................. nd rd ndnd rd
rd
e ersing e per
Auger ersing i n ............................................................................
per i n ............................................................................ BP
nd rd nd 10/35
rd BP 12/40
Auger Auger
m er ................................................................................................ mm 2
Weights ger di me er ....................................................................................
m er ................................................................................................
m er ................................................................................................
mm mm
mm2 350
2
Operating
ger di Rotary
meger diweight
er CECE ...........................................
.speed .......................................................................................
...................................................................................
me er ....................................................................................
mm kg
mmmin
350 65
117
350 72
Basic weight
e ersing .............................................................
per i n ............................................................................
Rotary speed .......................................................................................
Rotary speed ....................................................................................... min kgmin
117 64
117nd rd 71
e ersing e per
Screed ersing
i n ............................................................................
per i n ............................................................................ nd rd nd
00 rd
600
Dimensions
ScreedScreed
sic id re r c ed .......................................................................... mm 00 600
00
00 3000
600
Working width
sic id sic
re r id
sic id
..........................................................
e
re rended ..........................................................................
c ed ..........................................................................
c ed ..........................................................................
mm
mm
mm 350
mm 00 3000000
00 6000
3000
400
sic id in.
e id
sic id ei..........................................................................
ended red
ended c .i.........................................................................
n skids ..........................................................
mm mm
mm 000 600000 6000
000 300
Driving Characteristics
in. id in. i ickness ......................................................................................
red
id ci i redn skids ..........................................................
c i n skids ..........................................................
mm mm 300
mm 00 300 00 300
Working speed,
creed pl e dep max. ...............................................
..............................................................................
ickness ......................................................................................
ickness ...................................................................................... mm
m/min
mm
mm300
25
400
300
25
Max. gradeability
creed pl creed pl
creed pl e (dep.
ickness on soil con.) ........................
........................................................................
e dep ..............................................................................
e dep ..............................................................................
mm %
mm
mm400 30
15
400 30
creed pl creed pl
ee ing ................................................................................................
ickness
e ........................................................................
ickness ........................................................................
mm mm15 15 ric
elec
Drive r n .................................................................................................. %
e ing ................................................................................................
e ing ................................................................................................ elec ric -elec
, ...
ric 4,
Engine mmanufacturer
r per
................................................
re ency ...............................................................................
r n ..................................................................................................
n ..................................................................................................
% Hz Honda
0-29
% - , ... 4,- , ... 4,
Honda
Type
m per .........................................................................
i r per
rem i n rere ency ...............................................................................
ency .............................................................................
ency ............................................................................... Hz Hz
Hz 0-29
GX 0- 120
0-29
GX 120
Emission r stage
i r i n iresic n .........................................................
iency .............................................................................
eigre ........................................................................................
ency .............................................................................
Hz Hz
kg 0-
StageV/CARB
0- 4 00
3900
P.3 StageV/CARB P.3
Cooling .....................................................................
sic eig sic . rking id .............................................................................
........................................................................................
eig ........................................................................................
kg mm air00
000 4 00
kg 3900 4 3900
air
Number . rking
of cylinders
. idrking
.................................................
.............................................................................
id .............................................................................
mm mm 000
1 000
1
Filling capacities
Performance SAE J 1349 ........................................ kW 2,6 2,6
Filling Fuel
Speed Filling
capacities capacities
......................................................................................................
.......................................................................
l
min-1 3.600 3.600
ydr......................................................................................................
lic il .........................................................................................
Fuel ......................................................................................................
Fuel l ll 160
Drive system ............................................................ mech. mech.
ydr lic ydr il .........................................................................................
lic il .........................................................................................
l l 160 160
Fuel ..........................................................................
ec nic l m di ic i ns reser ed. c ines m y e s n i p i ns.
Gasoline Gasoline
Fuel comsump.
ec nic l m ecdi icnici l m
ns reser
aver.
di ic ed.
i ns reser
during
c ines m
ed. y c e s
operation
ines mn y i e s
p i n
....................
ns. i p i ns.
l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
169
Standard Equipment Optional Equipment
Tractor Tractor
D en r l l ric i n sys em
ep r e c n r l pper ings p i n l p in inis
ydr lic, eig d s le ger i l gic lly degr d le yd
r ck scr per ydr lic pper r n l p
pr p r i n lly c n r lled nd re ersi le ydr lic s spended nd d
e r-resis n c s gers scre l des push rollers
sep r ely repl ce le
independen nd re ersi le scr per Screed
el s ig - e r resis n pl es ydr lic cr n d s men
er r ck p ds inged side pl es
Heated side plates
Screed L.C.S. half-sided
. . . creed relie nd r c i n incre se 00 600 e ensi ns
system 250 mm
creed emper re c n r l 500 mm
MAGMALIFE l mini m e ing pl es 750 mm
MAGMALIFE m ic screed e ing 1250 mm
ec nic l screed l ck ed c i n s es
r n d s men dge s per 4 60
ide c n r l ger scr per el s
Levelling systems
Other eig nd cr ss-sl pe sen
Tools me ns l r s nic r mec
rk lig s sens rs
ree p se gener r
cke 40 l Other
lee m n gemen
n-lig ll n
Fields of application: D W
Dri er s se i s i el nd side-s i
ydr lic elec ric m
platform
le D W
performance strength and versatility. Thus, the machine is Digi l displ y r m c ine n gemen sp l s e m e r c i n
170
BOMAG
eller ld
TECHNICAL DATA
Technical Data BOMAG
Technical
Technical
Data Data BOMAG BOMAG
BF 600 C-2
Weight CECE BF 600BF
C-2600 C-2
WeightWi
Weight
CECE CECE i 600 screed ................................................. kg
00 screed 9 00 9 00
Wi 00 screed
Wi 00 screed
i 600 screed
i 600 screed
.................................................
.................................................
kg kg 9 00 99 00
00 9 00
Dimensions
Dimensions
Dimensions
r nsp r leng ..................................................................................... mm 6360
r nsp r leng
r nsp r.....................................................................................
leng .....................................................................................
mm
id ...................................................................................... mm6360 63600 3000
r nsp r r nsp
id ......................................................................................
r eigid ......................................................................................
mm
..................................................................................... mm 0 3000
30610 3000
r nsp r r eig
nsp r.....................................................................................
eig .....................................................................................
mm mm3061 3061
Travel characteristics
Travel Travel
characteristics
characteristics
r el speed ........................................................................................... km 0-4
r el speed
Wr rking speed
el speed
...........................................................................................
...........................................................................................
km
....................................................................................... kmmin
m 0-4-1 0-4
0- ri le
W rking speed
W rking speed
.......................................................................................
.......................................................................................
m min-1 m min 0- -1 ri0- le ri le
3 Drive
Asphalt
Drive Drive
ngine m n c rer .............................................................................. D
0,136 ngine mType ngine m
n ........................................................................................................
c rer n ..............................................................................
c rer .............................................................................. D D
4R1000
Type ........................................................................................................
Type
missi ........................................................................................................
n s ge ....................................................................................... 4R1000 4R1000 ge 4
0,167 missi n smissi ge
ling.......................................................................................
n s ge .......................................................................................
................................................................................................... ge li ge
id 4 4
ling ...................................................................................................
mling er ...................................................................................................
cylinders Displ cemen ....................................................... cm3li id 4 li id 00
m er cylinders
med p er cylinders
er Displ cemen
Displ.......................................................
cemen .......................................................
cm3
........................................................................................... cm34 00 4 3
kW 004
ed p ered p ...........................................................................................
er ...........................................................................................
kW kW 3 4 3 4
Crawler assembly
Crawler
Crawler
assembly
l leng assembly
............................................................................................. mm 2975
ng bow, l lengWidth .............................................................................................
l leng .............................................................................................
mm
...................................................................................................... mm2975 2975
300
Width ......................................................................................................
Width ......................................................................................................
mm mm300 300
Hopper
dle HopperHopper p ci y ................................................................................................. m3 7,0
Dimensions
p ci yWid
in pen)mm
.................................................................................................
p ci ( yings
.................................................................................................
m 3
................................................................................. m3 7,0
mm 7,0
3330
e plate
w oil Wid ( Wid
ings (pen) ings
.................................................................................
ings cl pen)
sed).................................................................................
L1 mm
H..............................................................................
H1 H2 L W mm3330 3330
2270
Wid ( Widings cl
eng ( ....................................................................................................
sed)
ings cl
..............................................................................
sed) ..............................................................................
mm mm2270 2270
00
BP 10/35 eng
658 962 700 1084 532 mm
eng ....................................................................................................
350 mm 00
illing ....................................................................................................
eig (middle) ............................................................................. 59000
illing
BP eigilling
12/40 (middle)
eig (middle)
.............................................................................
658.............................................................................
962 700 1084 542 mm 400 mm590 590
Conveyor
Conveyor
Conveyor
Number ................................................................................................... 2
Number...................................................................................................
Number ...................................................................................................
Rotary speed .......................................................................................... 2
min 2
64
Rotary speed
TechnicalRotary..........................................................................................
ndi id speed
l c n..........................................................................................
Data min
r l .................................................................................... min
64 64 nd rd
ndi id l c
ndi nidr l ....................................................................................
e ersing l c per
n r li....................................................................................
n ...............................................................................
BOMAG
nd rd nd rd
BOMAG
e ersing e per
ersing
i n ...............................................................................
per i n ............................................................................... nd rd
BPnd10/35
rd BP 12/40
Auger
Auger Number
Auger ................................................................................................... mm 2
Weights
Number...................................................................................................
Number
ger di...................................................................................................
mm
me er ....................................................................................... mm2 2
350
Operating
ger di Rotary
me
ger di weight
me er
speed CECE ...........................................
er .......................................................................................
.......................................................................................
mm
.......................................................................................... kg
mm350
min 65
350
117 72
Rotary speed
Basic Rotary
weight..........................................................................................
e ersing speed ..........................................................................................
.............................................................
per min kg
i n ............................................................................... 117
min 117nd
64 rd 71
e ersing e per
ersing
i n ...............................................................................
per i n ............................................................................... nd rd nd 00 rd
Screed 600
Dimensions
ScreedScreed
sic id re r c ed ............................................................................. mm 00 600
00
00 3000
600
Working width
sic id sic
re r id
c ed re..........................................................
e.............................................................................
rended
c ed .............................................................................
mm mm 350
mm 00 3000 00 3000
000 6000 400
sic id in.
sic
e id ended
id ei.............................................................................
ended
red c .............................................................................
mm
i n skids ............................................................. mm 000 6000
000
00 6000
300
Driving Characteristics
in. id in.
i ickness
red
id ci i .........................................................................................
red
n skids c i .............................................................
n skids .............................................................
mm mm 00 300
300 00 300
Working
ickness speed,
ickness
creed pl max. ...............................................
.........................................................................................
.........................................................................................
e dep mm
................................................................................. m/min
mm300 25
300
400 25
Max. gradeability
creed pl creed pl (dep. on soil con.) ........................
e dep .................................................................................
e dep
e ickness .................................................................................
mm
........................................................................... %
mm400 30
400
15 30
creed pl creed pl
ee ingickness e ...........................................................................
ickness ...........................................................................
mm
................................................................................................... mm15 15
elec ric
Drive
e ing ...................................................................................................
e
r ing ...................................................................................................
n ..................................................................................................... elec ric -2,5
elec ...
ric +4,5
Engine mr manufacturer ................................................ Hz -2,5 ... +4,5
r n .....................................................................................................
n .....................................................................................................
per re ency .................................................................................. Honda
-2,5
0-29... +4,5 Honda
Type
m per .........................................................................
rem
i r per
ency
i n re..................................................................................
re ency ency..................................................................................
Hz
................................................................................ Hz 0-29 GX 0- 120
0-29 GX 120
Emission
i r i n iresic r stage
iency
n .........................................................
eigre................................................................................
ency ................................................................................
Hz
........................................................................................... Hz
kg 0- StageV/CARB
0- 4 00
3900 P.3 StageV/CARB P.3
Cooling
sic eig sic .....................................................................
...........................................................................................
. eig
rking ...........................................................................................
kg
id ................................................................................ mm3900 4air
kg 3900
00
000 4 00 air
Number. rking of
. id cylinders
rking
Filling capacities
.................................................
................................................................................
id ................................................................................
mm mm 000 1000 1
Performance
Filling FuelFilling
capacities SAE J 1349 ........................................ kW
capacities
......................................................................................................... l
2,6 2,6
Speed .......................................................................
Fuel .........................................................................................................
Fuel
ydr.........................................................................................................
l
lic il............................................................................................ min-1
l 3.600
160 3.600
Drive
ydr lic system
ydr lic il............................................................
il............................................................................................
............................................................................................
l l 160 mech.
160 mech.
Fuel ..........................................................................
ec nic l m di ic i ns reser ed. c ines m y e s n i p i ns.
Gasoline Gasoline
Fuel comsump.
ec nic l m ec
di icnici l m
ns reser i aver.
di ic ed. ns reser during
c ines m
ed. ines moperation
y c e s n y i e s ns. i p....................
p i n i ns. l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
171
PAVER
Standard Equipment Optional Equipment
Operator compartment Operator compartment
D W ydr lic elec ric m le
Tractor Tractor
D en r l l ric i n sys em
ep r e c n r l pper ings p i n l p in inis
le ning ki i l gic lly degr d le ydr
ydr lic, eig d s le ger 6 6 ll- eel dri e
r ck scr per ydr lic pper r n l p
pr p r i n lly c n r lled nd re ersi le ydr lic s spended nd d
e r-resis n c s gers scre l des push rollers
sep r ely repl ce le d m l g i n ki
independen nd re ersi le scr per
el s ig - e r resis n pl es Screed
4 6 eel dri e ydr lic cr n d s men
inged side pl es
Screed Heated side plates
. . . creed relie nd r c i n incre se . . . l -sided
system 00 600 e ensi ns
creed emper re c n r l 250 mm
l mini m e ing pl es 500 mm
m ic screed e ing 750 mm
ydr lic screed l ck 1250 mm
r n d s men ed c i n s es
ide c n r l ger scr per el s dge s per 4 60
Dimensions in mm
Dimensions in mm
n-lig ll n
A B H H2 L W
BF 600 P-2 S 500 2580 A2550 3950 B 3100 6360H 2546 H2 L W
BF 600 P-2 S 600 2580 3000 3950 3100 6360 2546
BF 600 P-2 S 500 2580 2550 3950 3100 6360 2546
BF 600 P-2 S 600 2580 3000 3950 3100 6360 2546
172 BOMAG
eller ld
D- 6 4 pp rd
s c 6
D- 6 49 pp rd
el. (0)6 4 - 000
Fax (0)6742 - 3090
TECHNICAL DATA
Technical Data BOMAG
Technical
Technical
Data Data BOMAG BOMAG
BF 600 P-2
Weight CECE BF 600BF
P-2600 P-2
WeightWeight
CECE CECE
Wi 00 screed i 600 screed .............................................. kg 00 900
Wi 00 screed
Wi 00 screed
i 600 screed ..............................................
i 600 screed ..............................................
kg kg 00 900
00 900
Dimensions
Dimensions
Dimensions
r nsp r leng ................................................................................... mm 6360
r nsp r leng
r nsp ...................................................................................
r leng ...................................................................................
mm mm6360 6360
r nsp r id .................................................................................... mm 0 3000
r nsp r r id
nsp ....................................................................................
r id ....................................................................................
mm mm 0 3000 0 3000
r nsp r eig ................................................................................... mm 3100
r nsp r r eig
nsp ...................................................................................
r eig ...................................................................................
mm mm3100 3100
Travel characteristics
Travel characteristics
Travel characteristics
Travel speed ......................................................................................... km 0-15
Travel speed .........................................................................................
Travel speed .........................................................................................
km km0-15 0-15
W rking speed ..................................................................................... -1 m min-1 0-45 variable
W rking speed .....................................................................................
W rking speed .....................................................................................
m min m min0-45
-1
variable
0-45 variable
3 Drive
Drive Drive
Asphalt
ngine m n c rer ............................................................................ De
0,136 ngine m ngine m
n c rer ............................................................................
n c rer ............................................................................ De De
Type ...................................................................................................... D 0 06
Type ......................................................................................................
Type ...................................................................................................... D 0 D 06 0 06
0,167 missi n s ge ..................................................................................... ge 3
missi n smissi ge .....................................................................................
n s ge ..................................................................................... ge ge 3
3
ling ................................................................................................. li id
ling .................................................................................................
ling ................................................................................................. li3 id li id
m er cylinders Displ cemen ..................................................... cm3 6 606
m er cylinders
m er cylinders
Displ cemen Displ .....................................................
cemen .....................................................
cm3 cm6 606 6 606
ed p er ......................................................................................... kW 4
ed p er ed p .........................................................................................
er .........................................................................................
kW kW 4 4
Undercarriage
Undercarriage
Undercarriage
e r yres m er ............................................................................. 2
ng bow, e r yres e r yres
m er . ............................................................................
m er ............................................................................. 2 2
Type ...................................................................................................... 44 0
Type ......................................................................................................
Type ...................................................................................................... 44 0 44
0
r n yres m er ............................................................................ 4
r n yres r n yres m er ............................................................................
m er ............................................................................ 4 4
dle Di me er ............................................................................................... mm 500
Di me er ...............................................................................................
Dimensions Di me er ...............................................................................................
in mm mm mm500 500
e plate Width .................................................................................................... mm 280
Width ....................................................................................................
Width ....................................................................................................
mm mm280 280
w oil Hopper H H1 H2 L L1 W
HopperHopper p ci y ............................................................................................... m33 7,0
BPp 10/35 658 962 700 1084 532 m
ci y ............................................................................................... 350
p ci y ...............................................................................................
3
m 7,0 7,0
Wid ( ings pen) ............................................................................... mm 3330
Wid (
Wid ( ings ings
pen) ...............................................................................
pen) ...............................................................................
BP 12/40 658 962 700 1084 542 mm
Wid ( ings cl sed) ............................................................................ 400 mm3330
mm
3330
2270
Wid ( ings cl
Wid ( sed) ............................................................................ mm
ings cl sed) ............................................................................ mm2270 2270
eng .................................................................................................. mm 1800
eng ..................................................................................................
eng ..................................................................................................
mm mm1800 1800
illing eig (middle) ........................................................................... mm 515
illing eigilling eig (middle) ...........................................................................
(middle) ........................................................................... mm mm515 515
Conveyor
Technical Data
Conveyor
Conveyor BOMAG BOMAG
m er ................................................................................................. 2
m er .................................................................................................
m er ................................................................................................. 2 2
Rotary speed ........................................................................................ min BP
64 10/35 BP 12/40
Rotary speed ........................................................................................
Rotary speed ........................................................................................
min min
64 64
ndi id l c n r l .................................................................................. nd rd
ndinidr l ..................................................................................
ndi id l c l c n r l .................................................................................. nd rd nd rd
Weights e ersing per i n ............................................................................. nd rd
e ersing e per i n .............................................................................
ersing per i n ............................................................................. nd rd nd rd
Operating
Augerweight CECE ........................................... kg 65 72
Auger Auger
Basic weight ............................................................. kg
m er ................................................................................................. mm 64
2 71
m er .................................................................................................
m er .................................................................................................
mm mm2 2
ger di me er ..................................................................................... mm 350
ger di meger di
Dimensions er .....................................................................................
me er .....................................................................................
mm mm350 350
Rotary speed ........................................................................................ min 117
Rotary speed ........................................................................................
Rotary speed ........................................................................................
min min
117 117
Working width
e ersing
e ersing e per
ersing
..........................................................
per i n ............................................................................. mm
i n .............................................................................
per i n .............................................................................
350
nd rd nd
nd rd
rd
400
Screed 00 600
ScreedScreed
Driving Characteristics
sic id re r c ed ........................................................................... mm
00 600
00 600
00 3000
sic id re
Working sic r c
ided ...........................................................................
speed, re rmax.
c ed ...........................................................................
............................................... mm mm 00 3000
m/min 25 00 3000 25
sic id e ended ........................................................................... mm 000 6000
sic id
Max. e
sic ended
id e...........................................................................
gradeability ended
(dep. ...........................................................................
on soil con.) ........................ mm mm
% 000 6000
3000 6000
000 30
in. id i red c i n skids ........................................................... mm 300
in. id in. i red
id c ii n skids ...........................................................
red c i n skids ...........................................................
mm mm 00 30000 300
ickness ....................................................................................... mm 300
Drive ickness .......................................................................................
ickness ....................................................................................... mm mm300 300
creed pl e dep ............................................................................... mm 400
creed pl creed pl
e dep ...............................................................................
e dep ...............................................................................
mm mm400 400
Engine manufacturer
creed pl e ickness .................................................
........................................................................ mm Honda
15 Honda
creed pl creed pl
e ickness e .........................................................................
ickness .........................................................................
mm mm15 15
Type .........................................................................
e ing ................................................................................................. GX 120
elec ric GX 120
Emission e ing .................................................................................................
e ing .................................................................................................
stage ......................................................... elec ric StageV/CARB
elec ric P.3 StageV/CARB P.3
r n ................................................................................................... % - , ... 4,
r n ...................................................................................................
r n ...................................................................................................
% % - , ... 4,- , ... 4,
Cooling m .....................................................................
per re ency ................................................................................ air
0-29 air
m per rem per re ency ................................................................................
ency ................................................................................ 0-29 0-29
Number i rofi n cylinders .................................................
re ency .............................................................................. 1
20-58 1
i r i n rei r ency ..............................................................................
i n re ency .............................................................................. 20-58 20-58
Performance sic eig SAE J 1349 ........................................
......................................................................................... kW
kg 2,6
3900 4 00 2,6
sic eig.......................................................................
Speed sic
.........................................................................................
eig .........................................................................................
kg kg 3900 4 3.600
min-1 3900
00 4 00 3.600
. rking id .............................................................................. mm 7500
. rking . idrking ..............................................................................
id ..............................................................................
mm mm7500 7500
Drive system Filling capacities............................................................ mech. mech.
Filling..........................................................................
Fuel capacities
Filling capacities
Fuel ....................................................................................................... l Gasoline
285 Gasoline
Fuel .......................................................................................................
Fuel Fuel .......................................................................................................
comsump. aver. during operation .................... l l 285
l/h 285
0,9 0,9
ydr lic il .......................................................................................... l 160
ydr lic ydr
il ..........................................................................................
lic il ..........................................................................................
l l 160 160
Exciterec system nic l m di ic i ns reser ed. c ines m y e s n i p i ns.
Frequency
ec nic l m ec ................................................................
di icnici l m
ns reser
di ic ed.
i ns reser
c ines m
ed. y c e s
ines mn y i e s
p i ns.
n i p i ns. Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
173
PAVER
Standard Equipment Optional Equipment
Operator compartment Operator compartment
D W ydr lic elec ric m le
Tractor Tractor
D en r l l ric i n sys em
ep r e c n r l pper ings p i n l p in inis
le ning ki i l gic lly degr d le yd
ydr lic, eig d s le ger 6 6 ll- eel dri e
r ck scr per ydr lic pper r n l p
pr p r i n lly c n r lled nd re ersi le ydr lic s spended nd d
e r-resis n c s gers scre l des push rollers
sep r ely repl ce le d m l g i n ki
independen nd re ersi le scr per
el s ig - e r resis n pl es Screed
4 6 eel dri e ydr lic cr n d s men
inged side pl es
Screed Heated side plates
. . . creed relie nd r c i n incre se . . . l -sided
system 00 600 e ensi ns
creed emper re c n r l 250 mm
l mini m e ing pl es 500 mm
m ic screed e ing 750 mm
ydr lic screed l ck 1250 mm
r n d s men ed c i n s es
ide c n r l ger scr per el s dge s per 4 60
The BF 600 is a true all-round talent by the symbiosis of ydr lic inged r
Digi l displ y r m c ine n gemen
e rmer
sp l s e m e r c i n
174 BOMAG
eller ld
D- 6 4 pp rd
s c 6
D- 6 49 pp rd
el. (0)6 4 - 000
TECHNICAL DATA
Technical Data BOMAG
Technical
Technical
Data Data BOMAG BOMAG
BF 600 P-2
Weight CECE BF 600BF
P-2600 P-2
WeightWi
Weight
CECE CECE i 600 screed ..............................................
00 screed kg 18500
Wi 00 screed
Wi 00 screed
i 600 screed ..............................................
i 600 screed ..............................................
kg kg 18500 18500
Dimensions
Dimensions
Dimensions
r nsp r leng ................................................................................... mm 6360
r nsp r leng
rr nsp
nsp ...................................................................................
rr leng ...................................................................................
mm
id .................................................................................... mm
mm6360 63600 3000
r nsp r rr nsp
id ....................................................................................
nsp rr eig mm
id ....................................................................................
................................................................................... mm 0 3000
mm 31000 3000
r nsp r r eig
nsp ...................................................................................
r eig ...................................................................................
mm mm3100 3100
Travel characteristics
Travel Travel
characteristics
Travel characteristics
speed ......................................................................................... km 0-15
Travel speed .........................................................................................
Travel speed .........................................................................................
km
W rking speed ..................................................................................... km 0-15
m min -1 0-15 variable
0-45
W rking speed ..................................................................................... m min-1 m min
W rking speed ..................................................................................... 0-45
-1
variable
0-45 variable
3 Drive
Drive Drive
Asphalt
ngine m n c rer ............................................................................
0,136 ngine mType ......................................................................................................
ngine m
n c rer ............................................................................
n c rer ............................................................................ 4R1000
Type ......................................................................................................
Type ......................................................................................................
missi n s ge ..................................................................................... 4R1000 4R1000 ge ier 4
0,167 missi n smissi ge .....................................................................................
n s ge ..................................................................................... ge li ier 4
ge
ling ................................................................................................. id ier 4
ling .................................................................................................
mling .................................................................................................
er cylinders Displ cemen ..................................................... cm3li id 4 li id 00
m er cylinders
med p er Displ
er cylinders cemen
Displ ..................................................... cm3
cemen .....................................................
......................................................................................... cm4 00 4 004
3
kW
ed p er ed p
.........................................................................................
er .........................................................................................
kW kW 4 4
Undercarriage
Undercarriage
Undercarriage
e r yres m er ............................................................................. 2
ng bow, e r yres e r yres
m er .............................................................................
m er .............................................................................
Type ...................................................................................................... 2 2
44 0
Type ......................................................................................................
Type ......................................................................................................
r n yres m er ............................................................................ 44
44 0 4
0
Dir me
r n yres n yres
m m er ............................................................................
er ............................................................................
er ............................................................................................... mm4 4
500
dle Di me er ...............................................................................................
Di me er ...............................................................................................
mm mm500 500
Dimensions in mm
Width .................................................................................................... mm 280
e plate Width .................................................................................................... mm
Width .................................................................................................... mm280 280
w oil Hopper H H1 H2 L L1 W
HopperHopper
p ci y ............................................................................................... m3 7,0
BPp 10/35 658 962 700 1084 532 m
ci y ...............................................................................................
Widp ci
350
( y ...............................................................................................
3
ings pen) ............................................................................... m3 7,0
mm 7,0
3330
Wid 12/40
BP ( Wid
Wid
ings (pen)
( ings
ings cl pen) ...............................................................................
...............................................................................
658 962 700 1084 542 mm
sed) ............................................................................
400 mm3330
mm 3330
2270
Wid ( Wid eng ( ..................................................................................................
ings cl ings cl sed) ............................................................................
sed) ............................................................................ mm mm2270
mm 2270
1800
eng ..................................................................................................
eng ..................................................................................................
illing eig (middle) ........................................................................... mm mm
mm1800 1800
515
illing eigilling eig (middle) ...........................................................................
(middle) ........................................................................... mm mm515 515
Conveyor
Technical Data
Conveyor
Conveyor
m er .................................................................................................
BOMAG
2
BOMAG
m er .................................................................................................
m er
Rotary .................................................................................................
speed ........................................................................................ 2
min 2
64
BP 10/35 BP 12/40
Rotary speed ........................................................................................
Rotary
ndi id speed ........................................................................................ min
l c n r l .................................................................................. 64
min 64 nd rd
ndi id l c
ndi n idr
e ersing l ..................................................................................
l c per
n r l ..................................................................................
i n ............................................................................. nd rd nd
nd rd
rd
Weights
e ersing e per
ersing per i n .............................................................................
i n ............................................................................. nd rd nd rd
Augerweight CECE ........................................... kg
Operating 65 72
Auger Auger
Basic weight ............................................................. mm
m er ................................................................................................. kg 264 71
m er .................................................................................................
m er .................................................................................................
ger di mm
me er ..................................................................................... mm2
mm 2
350
ger di Rotary
Dimensionsme
ger di
er .speed ........................................................................................
....................................................................................
me er .....................................................................................
mm mm 350
min 350
117
Rotary speed ........................................................................................
Rotary speed ........................................................................................
e ersing per min
i n ............................................................................. min
117 117nd rd
Working width .......................................................... mm 350 400
e ersing e per
ersing
i n .............................................................................
per i n ............................................................................. nd rd nd rd
Screed 00 600
ScreedScreed
Driving Characteristics
sic id re r c ed ........................................................................... mm
00 600 00 600
00 3000
sic id sic
Working sic
respeed,
r id
id
c ed ...........................................................................
re rended
e c ed ...........................................................................
max. ............................................... mm
........................................................................... mm
m/min
mm 00 3000 25 00 3000
000 6000 25
sic id
Max. sic
e id ended
id ei...........................................................................
gradeability
in. ended
red c .i..........................................................................
(dep. on soil con.) ........................ mm
n skids ........................................................... mm
%
mm 000 6000
3000 6000
000 300 30
in. id in. i ickness .......................................................................................
id ci i red
red c i n skids ...........................................................
n skids ........................................................... mm mm
mm 00 300
300 00 300
Drive
ickness .......................................................................................
ickness .......................................................................................
creed pl mm
e dep ............................................................................... mm
mm 300 300
400
creed pl creed pl
Engine creed pl
e dep ...............................................................................
manufacturer e dep
e ...............................................................................
ickness mm
.........................................................................
................................................ mm400
mm 400
15
Honda Honda
creed pl creed pl
e ickness e .........................................................................
ickness .........................................................................
mm mm15 15
Type .........................................................................
e ing ................................................................................................. GX
elec ric 120 GX 120
e ing .................................................................................................
Emission re ing .................................................................................................
stage .........................................................
n ................................................................................................... % elec ric StageV/CARB
-elec ric 4,
, ... P.3 StageV/CARB P.3
r n ...................................................................................................
Cooling m r .....................................................................
n ...................................................................................................
per re ency ................................................................................ % % - , ... air
Hz - , ... 4,
4,
0-29 air
m per remi r ofper
ency ................................................................................
i n rere ency ................................................................................
Hz
ency .............................................................................. Hz 0-29
Hz 0-29
20-58
Number cylinders ................................................. 1 1
i r i n irer iency ..............................................................................
n re ency .............................................................................. Hz Hz 20-58 20-58
Performance sic eig SAE J 1349 ........................................
......................................................................................... kW
kg 2,6 4 00
3900 2,6
sic eig.......................................................................
Speed sic
.
.........................................................................................
eig
rking .........................................................................................
kg
id .............................................................................. kg 3900 4 7500
min-1
mm 3900
00 4 00
3.600 3.600
. rking . idrking ..............................................................................
id ..............................................................................
mm mm7500 mech. 7500 mech.
Drive systemFilling capacities ............................................................
Filling..........................................................................
Fuel Filling
capacities
Fuel capacities
....................................................................................................... l Gasoline
285 Gasoline
Fuel .......................................................................................................
Fuel Fuel
ydr.......................................................................................................
comsump. aver. during operation .................... l
lic il .......................................................................................... lll/h285 285
0,9
160 0,9
ydr lic ydr
il ..........................................................................................
lic il ..........................................................................................
l l 160 160
Exciterec system nic l m di ic i ns reser ed. c ines m y e s n i p i ns.
Frequency
ec nic l m ec ................................................................
di icnici l m
ns reser
di ic ed.
i ns reser
c ines m
ed. y c e s
ines mn y i e s
p i n
ns. i p i ns. Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
175
PAVER Standard Equipment
Operator compartment
Optional Equipment
Operator compartment
D W ydr lic elec ric m l
Tractor Tractor
D en r l l ric i n sys em
ep r e c n r l pper ings p i n l p in inis
le ning ki i l gic lly degr d le
ydr lic, eig d s le ger ydr lic pper r n l
r ck scr per ydr lic s spended nd
pr p r i n lly c n r lled nd re ersi le push rollers
e r-resis n c s gers scre l des
sep r ely repl ce le Screed
independen nd re ersi le scr per ydr lic cr n d s me
el s ig - e r resis n pl es inged side pl es
er r ck p ds Heated side plates
L.C.S. half-sided
Screed 00 600 e ensi ns
. . . creed relie nd r c i n incre se 250 mm
system 500 mm
creed emper re c n r l 750 mm
MAGMALIFE l mini m e ing pl es 1250 mm
MAGMALIFE m ic screed e ing ed c i n s es
ydr lic screed l ck dge s per 4 60
r n d s men
ide c n r l ger scr per el s Levelling systems
eig nd cr ss-sl pe se
Other me ns l r s nic r me
Tools sens rs
rk lig s
0 30 k gener r Other
cke 40 l lee m n gemen
n-lig ll n
performance strength and versatility. Thus, the machine is Digi l displ y r m c ine n gemen sp l s e m e r c i n
A B H H L W
BF 700 C-2 S 500 2975
A2550 3910
B 306
2
6460
H 2255
H2 L W
BF 700 C-2 S 600 2975 3000 3910 306 6460 2255
BF 700 C-2 S 500 2975 2550 3910 306 6460 2255
BF 700 C-2 S 600 2975 3000 3910 306 6460 2255
176
BOMAG
eller ld
TECHNICAL DATA
Technical Data BOMAG
Technical
Technical
Data Data BOMAG BOMAG
BF 700 C-2
Weight CECE BF 700BF
C-2700 C-2
WeightWi
CECE
Weight CECE i 600 screed ..............................................
00 screed kg 9 00 0 00
Wi 00 screed
Wi 00 screed
i 600 screed
i 600 screed
..............................................
..............................................
kg kg 9 00 09 00
00 0 00
Dimensions
Dimensions
Dimensions
r nsp r leng .................................................................................. mm 6360
r nsp r leng
rr nsp
nsp ..................................................................................
rr leng ..................................................................................
mm
id ................................................................................... mm
mm6360 63600 3000
r nsp r rr id
nsp
nsp ...................................................................................
rr eig
id ...................................................................................
mm
.................................................................................. mm
mm 0 3000
3060 3000
r nsp r r eig
nsp ..................................................................................
r eig ..................................................................................
mm mm306 306
Travel characteristics
Travel characteristics
Travel characteristics
Travel speed ........................................................................................ km 0-4
Travel speed
Travel
........................................................................................
speed ........................................................................................
W rking speed km
.................................................................................... km0-4 -1
m min 0-4 variable
0-25
W rking speed
W rking speed
....................................................................................
....................................................................................
m min-1 m min
0-25-1
variable
0-25 variable
3 Drive
Drive Drive
Asphalt
ngine m n c rer ........................................................................... D
0,136 ngine mType ngine m
n .....................................................................................................
c rern ...........................................................................
c rer ........................................................................... D D D 0 06
Type .....................................................................................................
Type .....................................................................................................
missi n s ge .................................................................................... D 0 D 06
ge 0 06 3
0,167 missi n smissi ge ....................................................................................
n s ge .................................................................................... ge li ge
ling ................................................................................................ id 3 3
ling ................................................................................................
mling er ................................................................................................
cylinders Displ cemen .................................................... cmli3 id li 606
6 id
m er cylinders
med p er cylinders
erDispl cemenDispl....................................................
cemen ....................................................
cm3
........................................................................................ cm
kW 6 606 6 606
3
4
ed p ered p ........................................................................................
er ........................................................................................
kW kW 4 4
Crawler assembly
Crawler
Crawler
assembly
l leng assembly
.......................................................................................... mm 2975
ng bow, l lengWidth ..........................................................................................
l leng ..........................................................................................
mm
................................................................................................... mm2975
mm 2975
300
Width ...................................................................................................
Width ...................................................................................................
mm mm300 300
Hopper
dle HopperHopper p ci y .............................................................................................. m3 7,0
Dimensions
p ci y Wid in mm
..............................................................................................
p ci ( yings
..............................................................................................
m 3
m3 7,0 7,0
e plate pen).............................................................................. mm 3330
Wid ( ings
Wid
Wid ( (
pen) ings
..............................................................................
ings cl pen)
sed)..............................................................................
L1 mm
H...........................................................................
H1 H2 L W mm3330
mm 3330
2270
w oil Wid ( ings cl
Wid
eng ( .................................................................................................
sed)
ings cl
...........................................................................
sed) ...........................................................................
mm mm2270
mm 2270
00
BP
eng10/35 658 962 700 1084 532 mm
................................................................................................. 350
eng ................................................................................................. mm
illing eig (middle) .......................................................................... mm 00 59000
illing eigilling
(middle)
eig (middle)
..........................................................................
..........................................................................
mm mm590 590
BP 12/40
Conveyor 658 962 700 1084 542 400
Conveyor
Conveyor
Number................................................................................................ 2
Number................................................................................................
Number
Rotary speed................................................................................................
....................................................................................... 2
min 2
64
Rotary speed
Rotary
ndi .......................................................................................
speed
id Data l c n.......................................................................................
min
r l ................................................................................. min
64 64 nd rd
Technical
ndi id l c
ndi BOMAG BOMAG
e nersing
idr l .................................................................................
l c per
n r li.................................................................................
n ............................................................................ nd rd nd
nd rd
rd
e ersing e per
ersing
i n ............................................................................
per i n ............................................................................ nd rd nd rd
Auger BP 10/35 BP 12/40
Auger Auger
Number................................................................................................ mm 2
Number................................................................................................
Weights Number
ger di................................................................................................
mm
me er .................................................................................... mm
mm2 2
400
ger di Rotary
Operatingmeger di
er weight
....................................................................................
me er
speed ....................................................................................
CECE ........................................... mm
....................................................................................... mm
kg400
min 400
65
117 72
Rotary speed
Basic Rotary
weight.......................................................................................
e ersing speed .......................................................................................
.............................................................
per min kgmin
i n ............................................................................ 117 117nd
64 rd 71
e ersing e per
ersing
i n ............................................................................
per i n ............................................................................ nd rd nd rd
Screed 00 600
Dimensions
ScreedScreed
sic id re r c ed .......................................................................... mm
00 600 00 600
00 3000
Working width
sic id re
sic
sic r c
ided e
id ..........................................................
re
..........................................................................
rended
c ed ..........................................................................
..........................................................................
mm mm
mm 00 3000
mm 350 00 3000
000 6000 400
sic id in. e
sic ended
idid e..........................................................................
ended
i red c ..........................................................................
mm
i n skids .......................................................... mm 000 6000
mm 000
00 6000
300
Driving
in. id in. Characteristics
i redid c ii ......................................................................................
ickness n skids
red c i..........................................................
n skids ..........................................................
mm mm 00 300
mm 30000 300
ickness
Workingcreed pl ......................................................................................
speed,ickness e dep......................................................................................
max. ............................................... mm
.............................................................................. mm 300
m/min
mm 25300
400 25
creed pl creed pl
Max. gradeability e dep ..............................................................................
creed pl e icknesse dep ..............................................................................
(dep. on soil con.) ........................ mm
........................................................................ mm400
%
mm 400
30
15 30
creed pl creed ple ickness e ........................................................................
ickness ........................................................................
mm mm15 15
e ing ................................................................................................ elec ric
Drive
e ing ................................................................................................
e
r ing ................................................................................................
n .................................................................................................. elec ric -elec ric 4,
, ...
r n ..................................................................................................
Engine mrmanufacturer
n ..................................................................................................
per ................................................
re ency ............................................................................... Hz - , ... 4,
-0-29
Honda, ... 4, Honda
m per .........................................................................
Type rem ency
i r per i n re ...............................................................................
re ency Hz
ency...............................................................................
............................................................................. Hz 0-29 GX
Hz 0-29
0- 120 GX 120
i r i n re
i
Emissionsic stage r ency
i n .............................................................................
re ency
......................................................... Hz
............................................................................. Hz 0- 0-
StageV/CARB P.3 StageV/CARB P.3
eig ........................................................................................ kg 3900 4 00
sic eig sic
Cooling ........................................................................................
. eig rking ........................................................................................
..................................................................... kg
id ............................................................................. kg
mm 3900 4 3900
air9000 4 00
00 air
Number . rking of. id rking
cylinders id .............................................................................
.............................................................................
................................................. mm mm9000 19000 1
Filling capacities
Performance
Filling capacities
Filling
Fuel
SAE J 1349 ........................................ kW
capacities
...................................................................................................... l
2,6 2,6
Speed .......................................................................
Fuel ......................................................................................................
Fuel
ydr......................................................................................................
l
lic il.........................................................................................
min-1
ll
3.600
60
3.600
Drive
ydr lic system
ydr lic ............................................................
il.........................................................................................
il.........................................................................................
l l 60 mech.
60 mech.
Fuel ..........................................................................
ec nic l m di ic i ns reser ed. c ines m y e s n i p i ns.
Gasoline Gasoline
Fuel comsump.
ec nic l m ec
di icnici l m
ns reser iaver.
di ic ed.
ns reser
c ines mduring
ed. ines moperation
y c e s n y i e s n i ....................
p i ns. p i ns. l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
177
PAVER
Standard Equipment Optional Equipment
Operator compartment Operator compartment
D W ydr lic elec ric m
Tractor Tractor
D en r l l ric i n sys em
ep r e c n r l pper ings p i n l p in inis
le ning ki i l gic lly degr d le
ydr lic, eig d s le ger ydr lic pper r n l
r ck scr per ydr lic s spended nd
pr p r i n lly c n r lled nd re ersi le push rollers
e r-resis n c s gers scre l des
sep r ely repl ce le Screed
independen nd re ersi le scr per ydr lic cr n d s m
el s ig - e r resis n pl es inged side pl es
er r ck p ds Heated side plates
L.C.S. half-sided
Screed 00 600 e ensi n
. . . creed relie nd r c i n incre se 250 mm
system 500 mm
creed emper re c n r l 750 mm
MAGMALIFE l mini m e ing pl es 0 mm
MAGMALIFE m ic screed e ing ed c i n s es
ydr lic screed l ck dge s per 4 60
r n d s men
ide c n r l ger scr per el s Levelling systems
eig nd cr ss-sl pe s
Other me ns l r s nic r m
Tools sens rs
rk lig s
0 30 k gener r Other
cke 40 l lee m n gemen
n-lig ll n
178
BOMAG
eller ld
TECHNICAL DATA
Technical Data BOMAG
Technical
Technical
Data Data BOMAG BF 700 C-2
BOMAG
Weight CECE
BF 700BF
C-2
700 C-2
Weight
WeightWiCECE CECE 600 screed ......................................................
00 screed kg 9 00 0 0
Wi 00 screed
Wi 00 screed
Dimensions 600 screed
600 screed
......................................................
......................................................
kg kg 9 00 09 000 0 0
Dimensions
Dimensions
r nsp r leng ................................................................................... mm 6360
rr nsp
r nsp r lengnsp rr...................................................................................
leng
id ....................................................................................
...................................................................................
mm mm
mm6360 63600 3000
r nsp r rr nsp
nsp rr eig ...................................................................................
id ....................................................................................
id ....................................................................................
mm mm 0 3000
mm 3060 3000
r nsp rTravel
r eig
nsp r...................................................................................
eig ...................................................................................
characteristics mm mm306 306
Travel Travel
characteristics
characteristics
r el speed ......................................................................................... km 0-4
Wr rking speed
r el speed el speed .....................................................................................
.........................................................................................
.........................................................................................
km m 0-4-
kmmin 0-
0-4 ri le
W rking speed
W rking speed
Drive ..................................................................................... m min- m min
..................................................................................... 0- - ri0- le ri le
3
Asphalt
Drive Drive
ngine m n c rer ............................................................................ MTU
0,136 ngine mType n ......................................................................................................
ngine m c rer n ............................................................................
c rer ............................................................................ MTU 4 000
MTU
missi n s ge .....................................................................................
Type ......................................................................................................
Type ...................................................................................................... 4 000 4 ge 000 4
0,167
missi n smissi ling.....................................................................................
ge .................................................................................................
n s ge ..................................................................................... ge li ge
id 4 4
mling er .................................................................................................
cylinders Displ cemen ..................................................... 3
cmli id 4
ling ................................................................................................. li id 00
ed p
m er cylinders er
m er cylinders .........................................................................................
Displ cemen
Displ..................................................... cm3
cemen ..................................................... kW
cm34 00 4 004
ed p Crawler
ered p
.........................................................................................
er .........................................................................................
assembly kW kW 4 4
CrawlerCrawler
assembly
l leng assembly
........................................................................................... mm 2975
ng bow, l lengWidth ....................................................................................................
...........................................................................................
l leng ...........................................................................................
mm mm
mm2975 300
2975
Width ....................................................................................................
Width ....................................................................................................
Hopper mm mm300 300
dle HopperHopper p ci y ............................................................................................... m3 7,0
Dimensions in pen)
mm
e plate p ci yWid ( yings ...............................................................................
...............................................................................................
p ci ...............................................................................................
m3 mm7,0
m3 3330
7,0
w oil Wid ( Wid
ings (
Wid ings cl
(pen)
ings sed) H...........................................................................
H1 H2 L L1 mm
...............................................................................
pen) W
............................................................................... mm
mm3330 2270
3330
Wid ( Wid eng ..................................................................................................
ings cl ( sed)
ings cl
...........................................................................
sed) ........................................................................... mm 00
BP 10/35 658 962 700 1084 532 mm 350 mm2270 2270
eng illing ..................................................................................................
eig (middle) ...........................................................................
..................................................................................................
eng mm mm 00
mm 590
00
BP 12/40
illing eig
illing
(middle)
Conveyor eig (middle) 658 962 700 1084 542 mm
........................................................................... 400
........................................................................... mm590 590
Conveyor
Conveyor
Number ................................................................................................. 2
Rotary
Numberspeed ........................................................................................
Number.................................................................................................
................................................................................................. min
2 64
2
Technicalndi id
Rotary speed
Rotary l c n........................................................................................
Data r l ..................................................................................
........................................................................................
speed min min
64 64 nd rd
e ersing
BOMAG BOMAG
ndi id l c
ndi l c per
n r li..................................................................................
n .............................................................................
nidr l .................................................................................. nd rd ndnd rd
rd
e ersing e per
Augerersing
i n .............................................................................
per i n ............................................................................. BPnd10/35
nd rd rd BP 12/40
Auger Number
Auger ................................................................................................. mm 2
Weights ger di.................................................................................................
me er .....................................................................................
Number.................................................................................................
Number mm mm2
mm 400
2
Operating
ger di Rotary
me er weight
ger di speed CECE ...........................................
........................................................................................
.....................................................................................
me er .....................................................................................
mm kg
min
mm400 65
400 72
Basic weight
e
Rotary speed ersing
Rotary .............................................................
per i n .............................................................................
........................................................................................
speed ........................................................................................
min kg
min 64nd rd 71
e ersing e per
Screed ersing
i n .............................................................................
per i n ............................................................................. nd rd nd
00 rd 600
Dimensions
ScreedScreed
sic id re r c ed ........................................................................... mm 00 600 00
00 3000
600
Working width
sic id sic
re r id
sic c ed e
id
..........................................................
re rended
c ed ...........................................................................
...........................................................................
...........................................................................
mm
mm
mm 350
000
mm 00 3000 6000
00 3000
400
sic id in.
e id
sic id ei...........................................................................
ended red
ended c ...........................................................................
i n skids ...........................................................
mm mm 00 6000
mm 000 6000
000 300
Driving Characteristics
in. id in. i ickness
id ci i .......................................................................................
red red
n skids c i ...........................................................
n skids ...........................................................
mm mm 00 300
mm 300
00 300
Working
ickness speed,
creed plickness e dep max. ...............................................
...............................................................................
.......................................................................................
.......................................................................................
mm m/min
mm300
mm 25
400
300 25
Max. gradeability
creed pl creed pl
creed pl e
e dep (dep.
ickness on soil con.) ........................
.........................................................................
e dep ...............................................................................
...............................................................................
mm %
mm
mm400 30
400 30
creed pl creed pl
ee ing ickness e .........................................................................
ickness .........................................................................
mm
................................................................................................. mm elec ric
Drive r n ...................................................................................................
e ing .................................................................................................
e ing ................................................................................................. elec ric -2,5
elec ...
ric +4,5
Engine mrmanufacturer
per ................................................ Hz -2,5 ... +4,5
re ency ................................................................................
r n ...................................................................................................
n ................................................................................................... Honda
0-29... +4,5
-2,5
Honda
Type
m per .........................................................................
i r per
rem i n re................................................................................
ency re ency ency................................................................................
..............................................................................
Hz Hz 0-29 GX
Hz 0- 120
0-29 GX 120
Emission r stage
i r i n iresic iency
n .........................................................
eigre..............................................................................
ency ..............................................................................
Hz
......................................................................................... Hz 0-
kg StageV/CARB
0- 4 00
3900 P.3 StageV/CARB P.3
Cooling
sic eig sic
.....................................................................
. rking .........................................................................................
id ..............................................................................
.........................................................................................
eig kg mm3900 4air
kg 9000
3900
00 4 00
air
Number. rking of
. id cylinders
rking .................................................
..............................................................................
id ..............................................................................
mm mm9000 1
9000 1
Filling capacities
Performance SAE J 1349 ........................................ kW 2,6 2,6
Filling FuelFilling
capacities capacities
....................................................................................................... l
Speed .......................................................................
ydr.......................................................................................................
lic il..........................................................................................
min-1
ll
3.600
60
3.600
Fuel .......................................................................................................
Fuel l
Drive system
ydr lic ydr
............................................................
il..........................................................................................
lic il..........................................................................................
l l 60
mech.
60
mech.
Fuel ..........................................................................
ec nic l m di ic i ns reser ed. c ines m y e s n i p i ns.
Gasoline Gasoline
Fuel comsump.
ec nic l m ecdi icnici l m
ns reser
aver.
di ic ed.
i ns reser
during
c ines m
ed. y c e s
operation
ines mn y i e s
p i n
.................... l/h
ns. i p i ns.
0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
179
PAVER Standard equipment
D W
Opti
Shipping dimensions in m3
180 3
Shipping dimensions
BF 800 C S 500
BF 800 C S 600 43,4in
3 m
4 ,969
Asphalt
Drive Drive
ngine m n c rer ............................................................................ D
0,136 ngine mType ......................................................................................................
ngine m
n c rer ............................................................................
n c rer ............................................................................ D D D 0 06
Type ......................................................................................................
Type ......................................................................................................
cl ssi ic i n............................................................................. D 0 D 06
ge 0 06ier 3
0,167 cl ssiling .................................................................................................
ic cli n.............................................................................
ssi ic i n............................................................................. ge Water
ge
ier 3 ier 3
ling .................................................................................................
ling .................................................................................................
m er cylinders ............................................................................. Water Water6
m er cylinders
med per cylinders
.............................................................................
er .............................................................................
3046........................................................................ kW6 63
ed p Speed ...................................................................................................
er
ed p 3046........................................................................
er 3046........................................................................
kW kW 3-1
min 3
000
Speed ...................................................................................................
Speed ...................................................................................................
min-1 min000
-1
000
Crawler assembly
ng bow, Crawler
Crawler
rassembly assembly
ler r ck ........................................................................................
r ler -Axle
r rck ........................................................................................
ler r ck ........................................................................................
base ............................................................................................ mm 00
-Axle base ............................................................................................
-Axle base ............................................................................................
-Width mm
................................................................................................... mm 00
mm 00
300
dle
Dimensions in mm
-Width ...................................................................................................
-Width ...................................................................................................
mm mm
300 300
e plate Hopper
w oil HopperHopper H H1 H2 L L1 W
p ci y ............................................................................................... m3 ,
p ci y ...............................................................................................
Widp ci ( y ...............................................................................................
m3
ings pen) ............................................................................... m3 ,
mm , 0
33
BP
Wid 10/35
( ings
Wid ( (
pen) ings 658 962 700 1084 532 350
...............................................................................
pen) ...............................................................................
mm mm
33 0 33 0
Wid ings cl sed) ............................................................................ mm 0
Wid 12/40
BP ( ings cl
Wideng ( ..................................................................................................
sed) ............................................................................
ings cl sed) ............................................................................
658 962 700 1084 542 400 mm mm
mm 0 0 00
eng ..................................................................................................
eng
illing ..................................................................................................
eig (middle) ...........................................................................mm mm
mm0 0 0 0
00
illing eigilling
(middle) ...........................................................................
eig (middle) ...........................................................................mm mm00 00
Scraper belt / auger
Scraper
Scraper
belt
Technical
m er ./................................................................................................
Dataauger
belt / auger
m er .................................................................................................
m er .................................................................................................
Width .................................................................................................... mm 400
BOMAG BOMAG
Width ....................................................................................................
Width ....................................................................................................
mm
Speed ................................................................................................... mm
400
min 400
BP
60 10/35 BP 12/40
Speed ...................................................................................................
Speed ...................................................................................................
min
ndi id l c n r l .................................................................................. 60
min 60 nd rd
ndi id l c
Weights e nersing
ndi idr l ..................................................................................
l c per
n r l ..................................................................................
i n ............................................................................. nd rd ndnd rd
rd
e ersing e per ersing
i n .............................................................................
per i n ............................................................................. nd rd nd rd
Operating weight
Conveyor auger CECE ........................................... kg 65 72
Conveyor
Basic -Conveyor
auger
weight auger
.............................................................
m er ............................................................................................. kg 64 71
- m er .............................................................................................
-- m er .............................................................................................
ger di me er ................................................................................. mm 400
Dimensions
- ger di- meger di
er .................................................................................
->Rotary me er .................................................................................
mm
speed .................................................................................... mm
400
min 400
9
->Rotary -->Rotary
Working speed ....................................................................................
ewidth speed ....................................................................................
ersing .......................................................... min mm
per i n .......................................................................... 9min 9 nd rd
350 400
- e ersing
- e per
ersing
i n ..........................................................................
per i n .......................................................................... nd rd nd rd
Screed 00 600
Driving Characteristics
ScreedScreed
creed ype .......................................................................................... 00 600
00
00 600
600
Working speed,
sic re rmax. ............................................... m/min
creed ype ..........................................................................................
creed ype ..........................................................................................
id c ed ........................................................................... mm 00 25
600
00 600
0 3000 25
Max. gradeability
sic id re
sic r c
sic id c(dep.
re rended
e on soil con.) ........................
ided ...........................................................................
ed ...........................................................................
mm
........................................................................... % 30
mm 0 3000
mm 0 3000
000 6000 30
sic id e sic
. ended
id
rking e...........................................................................
ended ...........................................................................
mm
id .............................................................................. mm000 6000
mm 000 6000
9000 0000
Drive. rking
min. . id idrking ..............................................................................
i redid ..............................................................................
c i n skids ...........................................................mm mm
mm9000 0000
9000
00 0000
300
min. id min.
i
Engine manufacturer red
id c ii n skids ...........................................................
red c i n skids ...........................................................
................................................ mm
ickness ....................................................................................... mm mm 00 300
Honda
300 00 300 Honda
ickness .......................................................................................
ickness .......................................................................................
Type .........................................................................
m ing pl e dep . mm
........................................................................ mm
mm300 300
GX 120
400 GX 120
m ing pl
m e dep
m ing pl .........................................................................
ing pl e dep
e .........................................................................
ickness mm
................................................................... mm
mm400 400
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
m ing pl
me e ing plickness e ...................................................................
ickness ...................................................................
ing .................................................................................................mm mm
Cooling ..................................................................... airlek ric air
e ing .................................................................................................
re of ing .................................................................................................
n ................................................................................................... % lek ric 1 - lek ric 4,
, ...
Number rmper
cylinders .................................................
r n ...................................................................................................
n ...................................................................................................
% %- , ... 4,
- , 9 ... 4,
1
re ency ................................................................................. Hz 0-
Performance
mper rei mper
ency re
.
SAE J 1349 ........................................
................................................................................
ency . ................................................................................
Hz
kW
Hz0- 9
2,6
0- 9
2,6
r i n re ency .............................................................................. Hz 0-
Speed
i r i n rei.......................................................................
r ency ..............................................................................
i n min-1 3.600 3.600
sic eigre .........................................................................................
ency ..............................................................................
Hz Hz 0-
kg 0- 4 00
3900
Drive system
sic eig sic eig ............................................................
.........................................................................................
.........................................................................................
kg kg3900 4mech.
3900
00 4 00 mech.
Filling capacities
Fuel .......................................................................... Gasoline Gasoline
Filling capacities
Filling capacities
Fuel ....................................................................................................... l 3
Fuel comsump. aver. during operation ....................
Fuel .......................................................................................................
Fuel .......................................................................................................
l
l/h
l 3
0,9
3
0,9
ydr lic il .......................................................................................... l 60
ydr lic ydr il ..........................................................................................
lic il ..........................................................................................
l l 60 60
Exciter system
Frequency ec ni l m................................................................
di ic i ns reser ed. c ines m y e s n i p i ns. Hz 90 90
ec ni l m diecic nii l m
ns reser
di ic ed.
i ns reser
c ines m
ed. y c e s
ines mn y i e s
p i ns.
n i p i ns.
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
181
PAVER Standard Equipment
Operator compartment
Optional Equipment
Operator compartment
D W ydr lic elec ric m le
Asphalt
Drive Drive
ngine m n c rer ............................................................................ D
0,136 ngine mType ......................................................................................................
ngine m
n c rer ............................................................................
n c rer ............................................................................ D D D 6. 06
Type ......................................................................................................
Type ......................................................................................................
cl ssi ic i n............................................................................. D 6. 06D 6.
ge 4 06
ier 4
0,167 cl ssiling .................................................................................................
ic cli ssi
n.............................................................................
ic i n............................................................................. ge 4 Water
ier 4
ge 4 ier 4
ling .................................................................................................
ling .................................................................................................
m er cylinders ............................................................................. Water Water
6
m er cylinders
med per cylinders
.............................................................................
er .............................................................................
3046........................................................................ kW6 6
140
ed p Speed ...................................................................................................
er
ed p 3046........................................................................
er 3046........................................................................
kW kW140
min-1 140
2000
Speed ...................................................................................................
Speed ...................................................................................................
min-1 min
2000
-1
2000
Crawler assembly
ng bow, Crawler
Crawler
r assembly assembly
ler r ck ........................................................................................
r ler -Axle
r rck ........................................................................................
ler r ck ........................................................................................
base ............................................................................................ mm 3360
-Axle base ............................................................................................
-Axle base ............................................................................................
-Width mm
................................................................................................... mm
3360
mm 3360
300
dle
Dimensions in mm
-Width ...................................................................................................
-Width ...................................................................................................
mm mm
300 300
e plate Hopper
w oil HopperHopper H H1 H2 L L1 W
p ci y ............................................................................................... m3 7,2
p ci y ...............................................................................................
Widp ci ( y ...............................................................................................
m3
ings pen) ............................................................................... m37,2
mm 7,2
3390
BP
Wid 10/35
( Wid
Wid
ings ( (pen)
ings 658 962 700 1084 532 350
...............................................................................
pen) ...............................................................................
mm mm3390 3390
ings cl sed) ............................................................................ mm 463
Wid 12/40
BP ( Wid
ings cl
eng ( ..................................................................................................
sed) ............................................................................
ings cl sed) ............................................................................
658 962 700 1084 542 400 mm mm463
mm 4636
eng ..................................................................................................
eng
illing ..................................................................................................
eig (middle) ........................................................................... mm mm 6
mm 606
illing eigilling
(middle) ...........................................................................
eig (middle) ........................................................................... mm mm60 60
Scraper belt
Scraper
Scraper
belt
m er Data
Technical belt
................................................................................................. 2
m er .................................................................................................
m er .................................................................................................
Width .................................................................................................... 2
mm
BOMAG
2
400
BOMAG
Width ....................................................................................................
Width ....................................................................................................
mm
Speed ................................................................................................... mm
400
min 400
BP
64 10/35 BP 12/40
Speed ...................................................................................................
Speed ...................................................................................................
ndi id l c n r l .................................................................................. min min 64 64
Serie
ndi id l c
Weights ndi nidr l ..................................................................................
e ersing l c per
n r l ..................................................................................
i n ............................................................................. Serie Serie
Serie
e ersing e per ersing i n .............................................................................
per i n ............................................................................. Serie Serie
Conveyor
Operating weight auger CECE ........................................... kg 65 72
Conveyor
Basic -Conveyor
auger
weight auger
.............................................................
m er ............................................................................................. kg 64
2 71
- m er .............................................................................................
-- m er .............................................................................................
ger di me er ................................................................................. 2
mm 2
400
Dimensions
- ger di
- meger di
er .................................................................................
->Rotary me er .................................................................................
mm
speed .................................................................................... mm
400
min 400
104
->Rotary-->Rotary
Working speed ....................................................................................
ewidth speed ....................................................................................
ersing min mm
per i n ..........................................................................
.......................................................... min
104 104nd rd
350 400
- e ersing
- e per
ersing
i n .per
.........................................................................
i n .......................................................................... nd rd nd rd
Screed 00 600
Driving Characteristics
ScreedScreed
creed ype .......................................................................................... 00 600
00
00 600
600
Working speed,
sic re rmax. ............................................... m/min
creed ype ..........................................................................................
creed ype ..........................................................................................
id c ed ........................................................................... mm 00 25
600
00 600
0 3000 25
Max. gradeability
sic id sic
re r id
sic id c(dep. on soil con.) ........................
c ed ...........................................................................
re rended
e ed ...........................................................................
mm
........................................................................... %
mm 0 3000
mm 30 0 3000
000 6000 30
sic id sic e. ended
id
rking e...........................................................................
ended ...........................................................................
mm
id .............................................................................. mm000 6000
mm 000 6000
9000 0000
Drive. rking
min. . id idrking
..............................................................................
i redid ..............................................................................
c i n skids ........................................................... mm mm
mm 9000 0000
9000
00 0000
300
min. id min.
i red
id c i i red
n skids ...........................................................
c i n skids ...........................................................
Engine manufacturer ................................................
ickness ....................................................................................... mm mm
mm 00 Honda300
300
300 00 Honda
ickness .......................................................................................
m ickness .......................................................................................
ing pl e dep . mm
........................................................................
Type ......................................................................... mm
mm 300 300
400
GX 120 GX 120
m ing pl
m e dep
m ing pl .........................................................................
ing pl e dep
e .........................................................................
ickness mm
................................................................... mm
mm 400 400
15
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
m ing pl
me e ing pl
ickness e ...................................................................
ickness ...................................................................
ing .................................................................................................mm mm 15 15lek ric
Cooling ..................................................................... air air
e ing .................................................................................................
re ing ................................................................................................. % lek ric - lek ric 4,
Number ofn ...................................................................................................
cylinders .................................................
r n ...................................................................................................
rmper n ...................................................................................................
% % - , ...
1
4,
-
, ...
, ... 4,
1
re ency ................................................................................. Hz 0-29
Performance
mper rei mper ency re
.
SAE J 1349 ........................................
................................................................................
ency . ................................................................................
Hz
kW
Hz 0-29
2,6
0-29
2,6
r i n re ency .............................................................................. Hz 20-58
Speed
i r i n ire.......................................................................
r iency ..............................................................................
sic n
eigre .........................................................................................
ency ..............................................................................
Hz Hz20-58 3.600
min-1
kg 20-58
3900 4 00
3.600
Drive system
sic eig sic eig ............................................................
.........................................................................................
.........................................................................................
kg kg3900 4mech.
3900
00 4 00 mech.
Filling capacities
Fuel .......................................................................... Gasoline Gasoline
Filling Filling
capacities
Fuel capacities
....................................................................................................... l 315
Fuel comsump. aver. during operation ....................
Fuel .......................................................................................................
Fuel .......................................................................................................
l
l/h
l 315
0,9
315
0,9
ydr lic il .......................................................................................... l 60
ydr lic ydr il ..........................................................................................
lic il ..........................................................................................
l l 60 60
Exciter system
Frequency ec ni l m................................................................
di ic i ns reser ed. c ines m y e s n i p i ns. Hz 90 90
ec ni l m di
ecic nii l m
ns reser
di ic ed.
i ns reser
c ines m
ed. y c e s
ines mn y i e s p i n
ns. i p i ns.
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
183
PAVER Standard equipment
D W
Optio
y
Shipping dimensions in m3
184 Shipping dimensions
BF 800 P S 500 in m3
4 ,969
BF 800 P S 600 43,4 3
BF 800 P S 500 4 ,969
BF 800 P S 600 43,4 3
TECHNICAL DATA
Technical
Technical
DataData BOMAG
BOMAG BOMAG
BOMAG
Technical Data Technical
Technical
DataData BOMAG BOMAG
BF BOMAG
BFBOMAG
800 800
P SP500
S 500 BOMAG
BF BOMAG
800
BF 800
P SP600
S 600
Weights
Weights BF 800 P S 500 BF 800
BFBF800
P800
SP500
PSS500
600 BF 800
BF 800
P SP600
S 600
Weights Weights
per Weights
per
ing ing
eig eig .................................................
.................................................
kg kg 000 000 300 300
per ing eig .................................................
per per ing ing eig eig .................................................
.................................................
kg 000 kg kg 000 000
300 300 300
Dimensions
Dimensions
Dimensions Dimensions
Dimensions
r nspr rnsp
leng
r leng
.............................................................
.............................................................
mm mm 6 00 6 00 6 00 6 00
r nsp r leng .............................................................
rr nsp
nsprr rrnsp
nsp
leng
idrr leng
.............................................................
.............................................................
mm 6 00
.............................................................. mm
id ..............................................................
mm mm
mm 6 00
0 6 600
000 6 00 3000
3000 6 00
r nsp r id ..............................................................
rr nsp
nsprr rrnsp
nsp
eig
idrr ..............................................................
id ..............................................................
mm 0
.............................................................
eig mm
.............................................................
mm mm
mm 30 0 303000
0 3000 30
30 3000
r nsp r eig .............................................................
r nspnner
nner rr rnsp
eig
ck r r rdi .............................................................
ck r eigdi .............................................................
mm 30
s ........................................................... mm
s ...........................................................
mm mm
mm 30 3900
3900 3030 30 3900
3900 30
nner r ck r di s ...........................................................
nner er nner
rr ck r
er
ck rrr di
ck r
di
ck r s ...........................................................
di
di s ...........................................................
mm 3900
s .......................................................... mm
s ..........................................................
mm mm
mm 3900 3900
3900
6 00 6 00 3900 3900
6 00 6 00
er r ck r di s ..........................................................
er r er ck rr di ck rs ..........................................................
di s ..........................................................
mm 6 00 mm mm 6 00 6 60000 6 00 6 00
Travel
Travel
characteristics
characteristics
Travel characteristics
Travel
Travel
Travel characteristics
Travel
speed characteristics
speed
(1) ..............................................................
(1) ..............................................................
km km 7 7 7 7
Travel speed (1) ..............................................................
Travel Travel
rspeed
r el speed ( speed
(1) ..............................................................
el speed ( (1) ..............................................................
km 7
) .............................................................. km km
) ..............................................................
km km 0-7 77
0- 7
0- 7
0-
3 Wr rking speed (
el speed ( ) ..............................................................
r el speed ( ) ..............................................................
Wr rking speed (
el speed ( ) ..............................................................
km 0-
) .......................................................... kmmin
) ..........................................................
m m 0- 0 0-
kmmin0- 0-0-0 0- 0 0-
0- 0- 0
Asphalt
W rking speed (
W rking speed (
W rking speed ( ) ..........................................................
W rking speed (
W rking speed ( ) ..........................................................
) .......................................................... m min
min
) ..........................................................
m min 0- 0
) ..........................................................
m m min
m 0- 0 0-4
min0-4 0-0-0 0 0- 0 0-4
0-4 0- 0
0,136 W rking speed (
W rking speed ( ) ..........................................................
W rking speed (
Drive
Drive
) ..........................................................
) ..........................................................
m min 0-4 m min m min0-4 0-40-4 0-4 0-4
0,167 Drive
ngine m
Drive
ngine mDrive
ngine mn cn rer ......................................................
c rer ......................................................
n c rer ......................................................
ngine m ngine mn cn rer ......................................................
c rer ......................................................
D
D D
D D D0DD 006
D D
D D D0 D 00
Type ................................................................................
Type ................................................................................ 06 0
Type ................................................................................
Type ................................................................................
Type ................................................................................
s cl sssicic
cl ssicic D 0 06
i n ....................................................
i n .................................................... ge 0 D
D 0
D
ge 0
06 060 3
3 D
ge 0 D 0
ge 0 0
3 3
s cl ssicic i n ....................................................
s cl sssicic
cl ssicici n ....................................................
i n ....................................................
ge
ling ...........................................................................
ling ........................................................................... 3 ge
Water ge
Water
ge 3 3 3 ge
Water ge
Water 3 3
ling ...........................................................................
ling ...........................................................................
m er m cylinders
er cylinders Water
ling ...........................................................................
.......................................................
....................................................... Water
6 6Water
Water Water
6 6Water
m er cylinders .......................................................
med per m cylinders
ed per cylinders
er er .......................................................
3046 .......................................................
3046 6
...................................................
...................................................
kW kW 63 636 63 63
ed p er 3046 ...................................................
Rated ed p
Rateded per er
3046 3046
...................................................
...................................................
kW 3
speed ................................................................... kW -1 min
speed ...................................................................
min kW -1 3
000 33
000 3
000 3
000
ng bow, Rated speed ...................................................................
RatedRated speed ...................................................................
speed ...................................................................
min-1 000 min-1 min-1 000 000000 000 000
Crawler
Crawlerassemblyassembly
Crawler assembly Rear
Crawler
Crawler
Rear assemblyassembly
tyres .......................................................................
tyres .......................................................................
dle Rear tyres .......................................................................
-Rearm-Rear
tyres .......................................................................
mtyres .......................................................................
er .........................................................................
er .........................................................................
Dimensions in mm
- m er .........................................................................
- m-Type
-Type -...............................................................................
er .........................................................................
m...............................................................................
er ......................................................................... 44 44
0 0 44 44
0 0
e plate -Type ...............................................................................
-Type ...............................................................................
r n -Type n ...............................................................................
44 0 44 44
0 44 0 0 44 44
0 0
w oil H ryres ......................................................................
yres ......................................................................
H1 H2 L
r n yres ...................................................................... L1 W
- r nm- ryres ......................................................................
nm yres ......................................................................
er .........................................................................
er ......................................................................... 4 4 4 4
- m er .........................................................................
- m - er .........................................................................
m er .........................................................................
BP 10/35 -Di
-Di me
me
-Di
658 er
-Dier
me
me
962 700 1084
-Di me er ........................................................................
532400 350 mm
........................................................................
er ........................................................................
........................................................................
er ........................................................................
mm mm
mm
mm
400 400
00
4 400 400
-Width
-Width
.............................................................................
.............................................................................
mm mm 0 00 000 00
0 000
-Width
BP .............................................................................
12/40 -Width -Width
658 .............................................................................
.962
............................................................................
700 1084 mm 542 0 400 mm mm 0 00 0 0
Hoppe Hoppe
Hoppe Hoppep Hoppe
ci y .........................................................................
p ci y .........................................................................m3 m3 , , , ,
p ci y .........................................................................
Widp Wid ci
( y .........................................................................
pings
ci
( y .........................................................................
ings m3 ,
pen) ......................................................... m3
pen) .........................................................
mm m3
mm , 0 33
33 , ,0 , 0 33
33 , 0
Wid ( ings pen) .........................................................
Wid
Wid Wid Wid
( ings
(
( ings cl ings
pen)
( ings cl . 0
........................................................
pen) . ........................................................
mm 33
sed) ...................................................... mm
sed) ......................................................
mm mm
mm 33 00 33330
00 33 00 33 00
Technical
Wid ( ings cl Data Wid sed) ......................................................
sed) ......................................................
eng Wid (engings cl
( ............................................................................
ings cl sed) ......................................................
mm 0
............................................................................ mm
mm mm
mm 0 0
BOMAG
0 0 00
0 BOMAG00
0 0
0 0
eng ............................................................................
eng ............................................................................
illing eng eig ............................................................................
illing mm 0 0
(middle) .....................................................
eig (middle) ..................................................... mm
mm mm
mm 0 0 00
00 0 00 0 0 0 00
00 0 0
illing illing
eig (middle) .....................................................
illing eig (middle) .....................................................
eig (middle) .....................................................
mm 00 mm mm BP
00 10/35
0000 BP0012/40
00
Scraper
Scraper belt belt / auger / auger
Scraper belt / auger
Scraper
nScraper
n ibelt belt
/ auger / auger
i y ..........................................................................
y ..........................................................................
Weights
n i y ..........................................................................
nWidth ..............................................................................
i y ..........................................................................
n i y ..........................................................................
Width .............................................................................. mm mm 400 400 400 400
Width ..............................................................................
Operating weightRated Width ..............................................................................
CECE Width ..............................................................................
Rated mm
........................................... 400
speed ................................................................... mm
kg
speed ................................................................... min mm 400 60
min65
60 400
400 400 60
7260 400
Rated speed ...................................................................
Rated Rated
speed ...................................................................
id speed ...................................................................
min 60 min min 60 nd6060
Basic weight ndi idndi l c n l c
r l ............................................................
n r l ............................................................
.............................................................
ndi id l c n r l ............................................................
ndi idndi l c id n l cr l ............................................................
kg
n r l ............................................................
nd rd
64nd rd nd rd
rdndndrdrd
7160 nd
60rdnd
nd rdnd
rd
rd
e ersing e ersing
per per i n .......................................................
i n ....................................................... nd rdnd rd nd rdnd rd
e ersing per i n .......................................................
e ersing e ersing
per per nd rd
i n .......................................................
i n ....................................................... nd rdndndrdrd nd rdnd rd
Dimensions ConveyorConveyor auger auger
Conveyor auger Conveyor mConveyor auger auger
er ........................................................................
m er ........................................................................
Working width ..........................................................
m er ........................................................................
- m- er ........................................................................
ger di m mm
er ........................................................................
ger di
me er ...........................................................
me er ...........................................................
350
mm mm 400 400
400
400 400
- ger di me er ...........................................................
-
->Rotary ger di
-
->Rotary ger di
mespeed ..............................................................
er ...........................................................
me er ...........................................................
mm 400
speed .............................................................. mm min mm 400 9
min 9 400400 400 9
9 400
Driving Characteristics
->Rotary speed ..............................................................
e -->Rotary
-->Rotary ersing speed ..............................................................
ersing
per per min 9
espeed ..............................................................
i n .................................................... min
i n .................................................... min 9 nd9 9rdnd rd 9 nd9 rdnd rd
- e ersing
Working speed, max.per i n . ...................................................
- e - e
ersing ersing
per per
i n . i n . ...................................................
...................................................
............................................... m/min 25 nd rd nd rdndndrdrd nd rdnd rd
25 600 600
Screed Screed 00 00
Screed
Max. gradeabilityScreed (dep.
creed Screed
creed 00
onype ....................................................................
soil con.) ........................
ype .................................................................... % 30 00
00 600
00
00 600 600
30 600 600
creed ype ....................................................................
creed
sic creed
ype ....................................................................
sic
id re
idype ....................................................................
r re 00
c ed .....................................................
r c ed ..................................................... mm mm 00
0 600 00
0 6003000
3000 600
sic id re r c ed .....................................................
Drive sic sic
sic sic
id e
id re
id rended
id re
c ed .....................................................
e rended
.c....................................................
ed .....................................................
mm 0 mm mm
.....................................................
mm mm 000 0 00030000 3000 6000
6000 3000
sic id e ended .....................................................
sic
. sic
idrking
. eidrking
id e ........................................................
ended ended
id .....................................................
mm 000
..................................................... mm mm
........................................................
mm mm 9000 000 9000000
6000 6000 9000
9000 6000
Engine manufacturer .
................................................
rking
. rking id ........................................................
. id
rking ........................................................
id mm
........................................................
mm 9000 mm
Honda
9000 9000
9000
Honda
9000
min. min. id idi red i red cing skids ......................................
cing skids ...................................... mm mm 1800 1800 300 9000
300
Type
min. id.........................................................................
i red cing skids ......................................
min. min. id ......................................................................
eig idi red
eig ......................................................................
i redcing skids ......................................
cing skids ......................................
mm 1800 mm mm
mm mm GX 1800120
300 1800
300 300 GX300 120
300 300
300
Emission stage .........................................................
eig ......................................................................
m eig ......................................................................
ming pl eiging pl ......................................................................
e dep e dep mm 300
................................................... mm mm
...................................................
mm mm StageV/CARB
300 400
400 300300 P.3 StageV/CARB
300 400
400 300 P.3
m ing pl e dep
. ..................................................
m m ing pl ing pl
e dep
Cooling .....................................................................
m m
ing pl ing pl
e e dep
ickness
e
. ..................................................
ickness
.
. ..................................................
mm 400
..............................................
. mm
..............................................
mm mm
mm 400
air 400400 air400 400
m ing pl e ickness ...............................................
m m
ing pl ing pl
e ickness
e ickness ...............................................
.mm
..............................................
e ing ...........................................................................
e ing ........................................................................... mm mm
Number of cylinders .................................................
e ing ...........................................................................
1lek riclek ric 1 lek riclek ric
re ing ...........................................................................
re ing ...........................................................................
lek ric
n .............................................................................
n ............................................................................. % % - lek ric
- lek
, ... , lek
4,ricric4,
... - lek ric
- lek
, ... ric
, 4,
... 4,
Performance SAE J 1349 ........................................
r n .............................................................................
rmper rmper
ren .............................................................................
ency
re .ency % - , ... 4, Hz
n .............................................................................
..........................................................
kW
........................................................... % Hz % 2,6
- , 9 ...
0- - -, 9
0- 4,
, ...
... 4,4, 2,6
- , 9 ...
0- - ,9
0- 4,
... 4,
Speed .......................................................................
mper re ency ...........................................................
i mper
r i i mper
rrere
n i n ency
re re .ency
.......................................................... min-1
...........................................................
Hz 0- 9
ency ........................................................
ency ........................................................ Hz Hz
Hz Hz 3.600
0-0-9 0-0- 0-9 9 3.600
0-0-9 0-0-9
i r i n system
Drive re ency ........................................................
i sic
r i i n r rei n ency ........................................................
re ency ........................................................
............................................................
sic
eig eig Hz 0-
...................................................................
................................................................... Hz
kg kg Hz 0-
mech.
3900 3900 0- 0- 40-00 40-00
mech.
sic eig ...................................................................
sic sic eig eig ...................................................................
...................................................................
kg 3900 kg kg 3900 3900 4 00 4 00 4 00
Fuel ..........................................................................
Filling
Filling
capacities
capacities Gasoline Gasoline
Fillingcomsump.
Fuel capacities aver.
Filling
Fuel Filling
capacities
during capacities
operation .................... l/h
.................................................................................
Fuel .................................................................................
l l 0,9
3 3 0,9
3 3
Fuel .................................................................................
Fuel
ydr.................................................................................
Fuel
ydr .................................................................................
likc likc l 3
il .................................................................. ll
il .................................................................. ll 360 360
3 360 360
ydr likc
Exciter system il
. .................................................................
ydr ydr
likc likc
il . .................................................................
il . .................................................................
l 60 l l 60 6060 60 60
Operating/control
Operating/control elements elements
Operating/control
Frequency elements
Operating/control
m Operating/control
er m dri
er er
dri
s se s elements
er s se s elements
................................................................
................................................ Hz
................................................ 90
1 1 901 1
m er dri er force
Centrifugal s se s ................................................
idem ie er m .........................................................................
ide dri
ieer .........................................................................
er
dri
s seer s se
s ................................................
s ................................................
....................................................... 1 kN 1 nd1 1rdnd rd
10 121 nd
1 rdnd rd
ide ie .........................................................................
ide ieyside .em ...................................................................
........................................................................
ieys .em ...................................................................
........................................................................
nd rd nd rd
nd rdnd
ndndrd
rdrd nd rd
rdnd
nd rd
Amplitude .................................................................
ys em ...................................................................
ys em ...................................................................
ys em ...................................................................
nd rd mm 1,33
nd rdndndrdrd 1,42nd
nd rdnd
rd
rd
ec ni l m
ec ni
di l m
ic i dins reser
ic i ns reser
ed. ed.
c ines m
c ines m
y e s y e s
n i n p ii ns.
p i ns.
Capacities
ec ni l m di ic i ns reser ed. ecc ni
ines m
l m
ec ni
diy l m
ice s
i dins reser
ic n i ns reser
i ed.
p i ns.
ed.
c ines m
c ines m
y e s y e s
n i n p ii ns.
p i ns.
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
185
PAVER Standard equipment
D W
Opti
BF 900 C - Tier 3 Dri er s se i s i el nd side-s i
r ec i n d s rd
ydr lic inged r
Digi l displ y r m c ine m n gemen H
ep r e c n r l pper ings
le ning ki
ydr lic, eig d s le ger
r ck scr per
. . . creed relie nd r c i n incre se
system L
creed emper re c n r l
s e ing elemen s
m ic screed e ing
ydr lic screed c n r l
r n d s men
6 rk lig s
ide c n r l ger scr per el s
Tools
er r ck pl es
30 k gener r
cke 40 l
pr p r i n lly c n r lled nd re ersi le
e r-resis n c s gers scre l des m
sep r ely repl ce le s
independen nd re ersi le scr per
el s ig - e r resis n pl es
Asphalt
Drive DriveDrive
ngine m
ngine m
n cn rerc......................................................
rer ...................................................... D D D D
0,136 ngine m n c rer ......................................................
ngine m
Type ngine m n cn rerc......................................................
rer ......................................................
D
................................................................................
Type ................................................................................ D D 6.
D DD 6.
6 6 D D 6.
D D 6.
6 6
Type ................................................................................
Type ................................................................................
Type
s cl................................................................................
sssi
clicssii ic D 6. 6
n .....................................................
i n ..................................................... D 6.
ge D 6.D 6.
6 6 6
ge 3 3 D 6.
ge D 6. 6 6 3
ge 3
0,167 s cl ssi ic i n .....................................................
s cl s cl
ssi ic ssii ic
n i n .....................................................
ge
..................................................... 3 ge
ling ...........................................................................
ling ........................................................................... er ge er ge
3 3 3 ge
er ge
er 3 3
ling ...........................................................................
ling ...........................................................................
ling
m er m cylinders ...........................................................................
er cylinders er
.......................................................
....................................................... 6 er
6 er er 6 er6 er
m er cylinders .......................................................
med p er med p cylinders
er cylinders
er
3046.......................................................
3046.......................................................
6
...................................................
...................................................
kW kW 660 660 6 660 660
ed p er 3046...................................................
Speed ed p
Speed ed per er
3046 3046 ...................................................
kW 60
...................................................
............................................................................. kW
.............................................................................
min- minkW - 000 6060
60 000 000 60
60 000
Speed .............................................................................
Speed Speed
.............................................................................
.............................................................................
min -
000 min- min- 000 000 000 000 000
Crawler
Crawlerassemblyassembly
ng bow, Crawler assembly Crawler
r Crawler
ler assembly
r r ler
ck assembly
..................................................................
r ck ..................................................................
r ler r ck ..................................................................
r -Axle
-Axle ler
r r ler
base ck
base..................................................................
r ck ..................................................................
......................................................................
......................................................................
mm mm 00 00 00 00
-Axle base ......................................................................
-Axle-Width
-Width -Axle
base base
......................................................................
......................................................................
mm 00
............................................................................. mm mm
............................................................................. 00 300
300 0000 00 300
300 00
dle
Dimensions in mm
-Width .............................................................................
-Width -Width
Hopper
.............................................................................
Hopper
.............................................................................
mm 300 mm mm 300 300
300 300 300
e plate
w oil Hopper Hopper
pH Hopper ci H1 H2 L L1 W
ci yp .........................................................................
y .........................................................................
m3 m3 , , , ,
p ci y .........................................................................
Widp Wid ci
( ypings
.........................................................................
ci
( yings
.........................................................................
m3 ,
pen)......................................................... m3 mm
pen).........................................................
mm m3 , 0 33
33 , ,0 , 0 33
33 , 0
BP
Wid 10/35 658
Wid Wid ings cl
962
ings cl
sed)
700
( ings pen).........................................................
( ings ( ings
pen) pen) 1084 53233 0350 mm mm
.........................................................
.........................................................
mm
......................................................
sed) ...................................................... 33 0 33330 0 33 0 33 0
Wid 12/40
BP ( ings cl sed) ......................................................
Wid
eng Wid
658 (eng ( 962
ings cl ings cl
sed)700 sed) ......................................................
mm 542 0400 mm mm
......................................................
............................................................................
............................................................................
1084 0 0 0 00 0 0 0 0
eng
eng ............................................................................
illing eng............................................................................
eig ............................................................................
illing (middle)
eig (middle) mm 0 0
..................................................... mm mm
..................................................... 0
000 00000 0 0
000 0000
illing eig (middle) .....................................................
illing illing eig (middle)
eig (middle) .....................................................
mm 00
..................................................... mm mm 00 0000 00 00
Scraper
Scraper
beltbelt
/ auger
/ auger
Scraper beltData
Technical / auger
Scraper
Scraper
Number
Number belt belt
/ auger / auger
...........................................................................
...........................................................................
Number...........................................................................
Number
Width Number
...........................................................................
Width ...........................................................................
..............................................................................
..............................................................................
BOMAG
mm mm 400 400
BOMAG
400 400
Width ..............................................................................
Width
Speed Width
..............................................................................
Speed ..............................................................................
mm 400
............................................................................. mm minmm
............................................................................. 400 10/35
minBP
60 400
60400 400
BP60 400
60
12/40
Speed .............................................................................
Speed
ndi id Speed
.............................................................................
ndi id .............................................................................
l c n l c min 60
r l ............................................................ min min 60 nd6060
n r l ............................................................ rdnd rd 60 nd60rdnd rd
ndi id l c n r l ............................................................
ndi idndi
e ersing l c
id per
e ersing n l c
r lper
i............................................................
nnr.......................................................
li............................................................
nd rd
n ....................................................... nd rdndndrdrd nd rdnd rd
Weights
e ersing per i n .......................................................
e ersing e ersing
per per i n .......................................................
i n .......................................................
nd rd nd rdndndrdrd nd rdnd rd
Operating weightConveyor
CECEConveyor auger auger
........................................... kg 65 72
Conveyor
Basic auger
weight Conveyor
Conveyor auger auger
.............................................................
->Number
->Number
....................................................................... kg
....................................................................... 64 71
->Number .......................................................................
-->Number
-->Number
ger di .......................................................................
me .......................................................................
ger di erme...........................................................
er ...........................................................
mm mm 4 0 4 0 4 0 4 0
Dimensions
- ger di me er ...........................................................
-->Rotary
ger di
-
->Rotaryger di
mespeed
speed erme...........................................................
er ...........................................................
mm 4 0
.............................................................. mm minmm
.............................................................. 4 0 9
min 9 4 40 0 4 0 4
9 9 0
->Rotary speed
Working width ->Rotary ersing ersing
per..............................................................
..............................................................
- e -->Rotaryespeed speed i n..............................................................
per min 9
.................................................... min min 350
i n....................................................
.......................................................... mm 9 nd9 9rdnd rd 9 nd9
400 rdnd rd
- e ersing per i n....................................................
- e - ersing e ersing per per i n....................................................
i n....................................................
nd rd nd rdndndrdrd nd rdnd rd
Screed
Screed
Driving
Screed Characteristics
Screed
Screed
creed
creed
ype ....................................................................
ype .................................................................... 00 00 600 600
Working speed, max. ...............................................
creed ype ....................................................................
creed
sic creed
ype re
sic
id ....................................................................
ype
id r re ed 00
r ..................................................... m/min
mm mm 25
c....................................................................
c ed ..................................................... 00
0 600
00
0 253000
6003000
600
Max.
sic gradeability (dep. id on eid rsoil
c ed
ended
e con.)
id re r c ed .....................................................
sic sic re re rended ........................
..................................................... %
mm mm 30
c ed .....................................................
mm 0 0 000
000 3000
0 306000
3000 3000
6000
sic id e ended.....................................................
. sic
sic id. eid
rking id e ........................................................
ended
rking ended .....................................................
mm 000
id..................................................... mm mm
........................................................ 000 9000
9000 000
6000 6000
00006000
0000
Drive. rking id ........................................................
min. . min. id rking
. idi rking
id i ........................................................
red cidi n skids
red ........................................................
mm
c i n skids 9000
..................................... mm mm
..................................... 9000
00 9000
0000
00 0000
300 0000
300
min. id manufacturer
Engine i red c i n skids min. min. id ickness
ickness idi .................................................................
red c i n skids
..................................... .....................................
i .................................................................
red c i n skids
mm
................................................ .....................................
00 mm mm 00 300
300
Honda 00
300 300
Honda
300 300
300
Type ickness .................................................................
m ickness ickness
ming pl .................................................................
ing pl
e dep .................................................................
e dep mm 300
...................................................
......................................................................... ...................................................
mm mm 300 120
400
GX 300
300
400 300
400
GX 120 300
400
m ing pl e dep ...................................................
m ming pling pl e dep
e e dep
...................................................
ickness
e ...................................................
ickness mm 400
.............................................
.............................................
mm mm 400 400
400 400 400
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
m ing pl e icknessm e.............................................
ing meing pl
ing ing ple ickness
e ickness.............................................
mm.............................................
........................................................................... mm mm
...........................................................................
Cooling .....................................................................
e ing ...........................................................................
e
airlec riclec ric air lec riclec ric
r ing n re.............................................................................
...........................................................................
ing ...........................................................................
lec ric
Number of cylinders n .............................................................................
.................................................
r n .............................................................................
rmper n r.............................................................................
n .............................................................................
- , ... 4,
1-- lec ric
- lec
, ... , lec
4,ricric4,
...
1 -- lec ric
- lec
, ... ric 4,
, 4,
...
mper
re ency re ...........................................................
ency...........................................................
Hz Hz 0- 9 -0--, 9
, ... 4,
, ...
... 4,4, 0-, 9 ...
-0-, 94,
... 4,
Performance SAEi mper Jr 1349 rrere
n i n
........................................
mper re ency...........................................................
i i mper ency
reency
re ...........................................................
ency
ency
kW
...........................................................
Hz 0- 9
........................................................
........................................................
Hz Hz
2,6
0-0-9 0-0-0-9 9
2,60-0-9 0-0-9
Speed
i r i n re .......................................................................
ency ........................................................
i sic
r i i n r re
sic
eig i n
eig ency ........................................................ min-1
re ...................................................................
ency ........................................................
Hz 0-
................................................................... Hz kg
kg Hz 3.600
0- 3900
3900 0-0- 3.600
40-00 40-00
Drive
sic eig system ............................................................
...................................................................
sic sic eig eig ...................................................................
...................................................................
kg 3900 kg kg mech.
3900 3900 4 00 mech.
4 00 4 00
Filling Fillingcapacities
capacities
Fuel .......................................................................... Gasoline Gasoline
Filling capacities Filling Filling
Fuelcapacities capacities
Fuel .................................................................................
.................................................................................
l l 3 3 3 3
Fuel comsump. aver. during operation
Fuel .................................................................................
....................
Fuel .................................................................................
l/h
Fuel .................................................................................
l 3 l l
0,9
3 33
0,93 3
ydr ydr
lic illic
....................................................................
il....................................................................
l l 60 60 60 60
ydr lic il....................................................................
Exciter system ydr ydr lic illic
....................................................................
il....................................................................
l 60 l l 60 6060 60 60
Frequency ................................................................
ec ni l m
ec ni di l m
ic i dins reser
ic i ns reser
ed. ed.
c ines mc ines m
y e s y e s p Hz
n i n p ii ns. i ns. 90 90
ec ni l m di ic i ns reser ed. ecc niines m
l m
ec ni diy l m
ice si dins reser
ic n i ns reser
i ed.
p i ns.
ed.
c ines mc ines m
y e s y e s
n i n p ii ns.
p i ns.
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
187
Standard equipment Optional equipment
FEEDER
Operator’s platform Operator’s platform
2 driver’s seats slewable and rotatable Weather protection for
Protection, dashboard Comfort seat with sea
Asphalt
TransportBMF 2500
height BMF 2500 ..................................................
S Offset S Offset ..................................................
mm
.................................................................................. mm13500 13500
3100
0,136 TransportTransport
height height ..................................................................................
.................................................................................. mm
Loading angle ...................................................................................... mm
° 3100 3100
10
0,167 Loading angle
Loading
......................................................................................
angle ......................................................................................
° ° 10 10
Travel characteristics
Travel characteristics
Travel characteristics
Travel speed ........................................................................................ km/h 0-4
Travel speed
Travel
........................................................................................
Working speed
speed ........................................................................................
km/h
.................................................................................... km/h
0-4
m/min 0-4
0-25 variable
Working
Working speed speed ....................................................................................
.................................................................................... m/min m/min
0-25 variable
0-25 variable
Drive
Drive Drive
Engine manufacturer ........................................................................... Cummins
ng bow, Engine manufacturer
Engine manufacturer
...........................................................................
...........................................................................
Type ..................................................................................................... CumminsCummins
QSB6.7-C260
Type .....................................................................................................
Type
Exhaust .....................................................................................................
classification .......................................................................... QSB6.7-C260 QSB6.7-C260
Stage III a / TIER 3
Exhaust classification
Exhaust classification
..........................................................................
..........................................................................
Cooling ................................................................................................ Stage III aStage
/ TIER
Fluid III 3a / TIER 3
dle Cooling ................................................................................................
Cooling
Number................................................................................................
of in
cylinders Fluid Fluid
Dimensions mm............................................................................ 6
e plate Number of Number
cylinders
Displacement of cylinders
............................................................................
............................................................................
....................................................................................... cm63 6
6700
w oil DisplacementDisplacement
Rated H H1 H2 L L1 cm
....................................................................................... W3
.......................................................................................
power ........................................................................................ cm
kW6700
3
/ hp 6700
170 / 231
Rated
BP 10/35 Rated
power
Power ........................................................................................
power ........................................................................................
658 962 700 1084 532 kW 350/ hp
.................................................................................................. kW170
rpm / hp/ 231170
2200/ 231
Power ..................................................................................................
Power ..................................................................................................
rpm rpm
2200 2200
Track chains 658
BP 12/40 962 700 1084 542 400
Track chains
Track chains
Overall length ...................................................................................... mm 3900
Overall length
Overall
Width......................................................................................
length ......................................................................................
mm
................................................................................................... mm3900 3900
320
Width ...................................................................................................
Width ...................................................................................................
mm mm320 320
Hopper
Technical
HopperHopper
Data
Capacity .............................................................................................. m3 / t BOMAG
7 / 15 BOMAG
Capacity Capacity
..............................................................................................
Width ..............................................................................................
(wings m3 / t
open).............................................................................. m
mm
3
7/ /t 15 7 / 15
3345
Width (wings
Width open)
(wings..............................................................................
open) mm
.............................................................................. mm3345
BP
3345
10/35 BP 12/40
closed) ........................................................................... 2550
Width (wings
Width
Length closed)
(wings ...........................................................................
closed) ...........................................................................
mm
................................................................................................. mm2550 2550
2200
Weights
Length .................................................................................................
Length
Filling height mm
.................................................................................................
(middle) .......................................................................... mm2200 2200
523
Operating
Filling height
Filling weight
(middle) CECE ...........................................
height..........................................................................
(middle) ..........................................................................
mm kg
mm523 65
523 72
Conveyor
Basic weight belt
............................................................. kg 64 71
Conveyor
Conveyor
Typebelt belt
..................................................................................................... Rubber band,
Type .....................................................................................................
Type ..................................................................................................... mountedband,
Rubber band,
Rubber on two
Dimensions roller
mounted mounted
on twochains,
on two
Working width .......................................................... mm with metal
350
roller chains,
roller cross ties
chains, 400
Velocity ............................................................................................... with metalInfinitely
with
cross
metal variable
tiescross ties
Velocity ...............................................................................................
Driving Velocity
Width ...............................................................................................
...................................................................................................
Characteristics mmInfinitely variable
Infinitely
1200 variable
Width ...................................................................................................
Width
Conveying ...................................................................................................
height BM 2500 S / BMF 2500 M ..................................... mm mm1200 1200
2180 mm
Working speed, max. ............................................... m/min 25 (with hydraulic
25
Conveying Conveying
height BM height
2500BM S / 2500
BMF 2500 S / BMF M .....................................
2500 M .....................................
mm mm2180 mm2180 mm
Max. gradeability (dep. on soil con.) ........................ % 30
heighthydraulic
(with hydraulic
(with adjustment 30
2560 mm)
height adjustment
height adjustment
Drive Conveying height BM 2500 S Offset .................................................. 2560 mm)2560
2900 mm)
Conveying
Engine height
Conveying
Capacity BM
manufacturer 2500BM
height S Offset
2500 ..................................................
S Offset ..................................................
..............................................................................................
................................................ t/h2900 Honda2900
4000 Honda
Capacity Capacity
..............................................................................................
..............................................................................................
t/h t/h4000 4000
Type Filling capacities
......................................................................... GX 120 GX 120
Filling capacities
Emission Filling stagecapacities......................................................... l
Fuel ...................................................................................................... StageV/CARB
300 P.3 StageV/CARB P.3
Fuel ......................................................................................................
Cooling Fuel ......................................................................................................
Hydraulic l
system .................................................................................
..................................................................... l 300 300
200
air air
HydraulicHydraulic
Number system .................................................................................
system .................................................................................
of cylinders l l 200 1200 1
Electric system .................................................
ElectricElectric
Performance system
Voltage system
SAE J 1349 ........................................ kW
................................................................................................ V 2,6
24 2,6
Speed .......................................................................
Voltage ................................................................................................
Voltage ................................................................................................
V min-1
V 24 3.600
24 3.600
Drive system ............................................................
Technial modifications reserved. Machines may be shown with options. mech. mech.
Fuel ..........................................................................
Technial modifications
Technial modifications
reserved. Machines
reserved.mayMachines
be shown maywith
be options.
shown with options. Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
189
FEEDER Standard equipment
Operator’s platform
Optional equipment
Operator’s platform
dri er s se s sle le nd r le We er pr ec i n
BMF 2500 - Tier 4 r ec i n, d s
d s le d s
rd
rd
m r se i se
eig d s le li
ydr lic lly ld le r
Digi l displ y r m c ine m n gemen Tractive unit
We er pr ec i n r peci l p in inis
i -degr d le ydr
Tractive unit Camera system
el nk 300 li res ign l l mp sys em
ndi id l c n r l cke l ps
r ck c in scr per Conveyor belt
Rubber floor plates le le el
ydr lic pper r n l p ( nly r m del
le ning ki le le el c eri
re-ins ll i n s i elling c n ey r D lig ing r sle
mer sys em r s
Conveyor belt ydr lic eig d
en r l l ric i n c n ey r el c in belt
cr per r c n ey r el
m ic c n ey r el cle ning sys em Assistance systems
m ic s eering (
Assistance systems m ic s eering (
n- rd l
m ic dis nce c n r l Miscellaneous
m ic l ding ssis n lee m n gemen
p p i n ll min i n ll n
D ill min i
Miscellaneous D ll min i n s
l gen rking lig s c n ey r el s
l s ing e c n ire e ing is er
ck p l rm ming me lig
4 s cke s ll min i n engin
s cke
Fields of application: r ge c mp r men s
The BOMAG BMF 2500 feeder delivers uniform and constant material to the
Standard equipment Optional equipment
paver, reducing paving times and improving the quality of the finished job. The
Operator’s platform Operator’s platform
outstanding features of the BOMAG BMF 2500 feeder are its high output
dri er s se and
s sle le nd r le We er pr ec i n r pl rm
r ec i n, d s rd m r se i se e ing
compact design. Theoretical output is 4,000 t/h, which means the unit can handle
d s le d s rd eig d s le li pl rm
ydr lic lly ld le r
a 27 tonne lorry load in only 35 seconds. At the same time the feeder widthy is
Digi l displ r m c ine m n gemen Tractive unit
just 2.55 m; narrow enough for transporting without special permit. This makes
We er pr ec i n r peci l p in inis
i -degr d le ydr lic il BOMAG
eller ld
the BMF 2500 a versatile machine which can be used on site in confinedTractiveareas..
unit Camera system D- 6 4
s c
pp rd
6
el nk 300 li res ign l l mp sys em D- 6 49 pp rd
ndi id l c n r l cke l ps el. (0)6 4 - 000
(0)6 4 - 3090
r ck c in scr per Conveyor
940 00 0 0 belt 003 0
PRE 940 00 010
Rubber floor plates le le el
ydr lic pper r n l p ( nly r m del 00 )
le ning ki le le el c ering
re-ins ll i n s i elling c n ey r D lig ing r sle le c n ey r
mer sys em r sle le el
Conveyor belt ydr lic eig d s men r c n ey r
en r l l ric i n c n ey r el c in belt
cr per r c n ey r el
m ic c n ey r el cle ning sys em Assistance systems
m ic s eering (m . 4.0 )
Assistance systems m ic s eering (m . 0.0 )
n- rd l
m ic dis nce c n r l Miscellaneous
m ic l ding ssis n lee m n gemen
p p i n ll min i n ll n ( 4 , 0 W)
Dimensions in m D ill min i n
Dimensions in m Miscellaneous D ll min i n s r nd medi m
Length Width Height l gen rking lig s c n ey r el s
Length Width Height l s ing e c n ire e ing is er
BMF 2500 S
BMF 2500 S
9,20 2,55
9,20
3, 0
2,55 3, 0 ck p l rm ming me lig nc i n
BMF 2500 M BMF 25000, M
6 2,55 0, 3,6 0 2,55 3, 0 4 s cke s ll min i n engine c mp r men
BMF 2500 S OffsetBMF 2500
3, S
0 Offset 2,55 3, 3,0 0 2,55 3, 0 s cke
r ge c mp r men s
190
TECHNICAL DATA
Technical Data Technical Data BOMAG BOMAG
BMF 2500 BMF 2500
WeightsCECE WeightsCECE
BMF 2500 S .................................................................. kg 20000
BMF 2500 S .................................................................. kg 20000
BMF 2500 SM ............................................................... kg 20500
BMF 2500 SM ............................................................... kg 20500
BMF 2500 SOffset ......................................................... kg 24500
BMF 2500 SOffset ......................................................... kg 24500
Dimensions Dimensions
r nsp r leng 00 r nsp .......................................
r leng mm 9200
00 ....................................... mm 9200
leng 00 ......................................
leng mm 0 60
00 ...................................... mm 0 60
leng 00 se ............................
leng mm 3 00
00 se ............................ mm 3 00
r nsp r id .............................................................. mm 2550
r nsp r id .............................................................. mm 2550
r nsp r eig ............................................................. mm 3 00
r nsp r eig ............................................................. mm 3 00
3
Asphalt
ding ngle ................................................................. ° 0
ding ngle ................................................................. ° 0
0,136 Travel characteristics Travel characteristics
0,167 r el speed ................................................................... km/h 0-4
r el speed ................................................................... km/h 0-4
W rking speed ............................................................... m min 0- ri lem min
W rking speed ............................................................... 0- ri le
Drive Drive
ngine m n c rer ......................................................
ngine m n c rer ......................................................mmins mmins
Type ................................................................................ 6. - 60 ( ier 4 in l) 6. - 60 ( ier 4 in l)
Type ................................................................................
missi n s ge ............................................................... ge
missi n s ge ............................................................... 4 ge 4
ng bow, s cl ssi ic i n ..................................................... ier 4 in l
s cl ssi ic i n ..................................................... ier 4 in l
ling ........................................................................... Fluid
ling ........................................................................... Fluid
dle m er cylinders ....................................................... 6
m er cylinders ....................................................... 6
Dimensions in mm
Displ cemen .................................................................. cm 3
6 00
Displ cemen .................................................................. cm 6 00
e plate 3
ed p er ...................................................................
H er H1
ed p H2 L kW / hp 0
L1 W kW / hp 3
................................................................... 0 3
w oil
er ............................................................................. rpm 2200
er ............................................................................. rpm 2200
BP 10/35 658 962 700 1084 532 350
Track chains Track chains
BPer12/40
ll leng er658ll leng 962 700 1084
................................................................. mm 5423900400 mm
................................................................. 3900
Width .............................................................................. mm 320
Width .............................................................................. mm 320
Hopper Hopper
Technical Data p ci y .........................................................................
p ci y ......................................................................... m /t
3
m 3
/t
BOMAG BOMAG
Wid ( ings pen) ......................................................... mm 3345
Wid ( ings pen) ......................................................... mm 3345
Wid ( ings cl sed) ...................................................... mm 2550
Wid ( ings cl sed) ...................................................... mm BP
2550 10/35 BP 12/40
eng ............................................................................ mm 2200
eng ............................................................................ mm 2200
Weights
illing eig (middle) ..................................................... mm 523
illing eig (middle) ..................................................... mm 523
Operating
Conveyor belt weightConveyor CECE ...........................................
belt kg 65 72
Basic weight .............................................................
Type ................................................................................ er nd, m
Type ................................................................................ kg
n ed 64
n er nd, m n ed n 71
r ller c ins, r ller c ins,
Dimensions i me l cr ss ies i me l cr ss ies
Working width ..........................................................
el ci y .......................................................................... n ini ely ri mm
el ci y .......................................................................... le 350
n ini ely ri le
400
Width .............................................................................. mm 00
Width .............................................................................. mm 00
Driving Characteristics
n eying eig ........................................................... mm 0 mm
n eying eig ........................................................... mm 0 mm
Working speed, max. ............................................... ( i ydr lic m/min (25i ydr lic 25
eig d s men 60 mm) eig d s men 60 mm)
Max. gradeability (dep. on soil con.) ........................ % 30 30
p ci y ......................................................................... t/h 4000
p ci y ......................................................................... t/h 4000
Drive
Filling capacities Filling capacities
Engine manufacturer ................................................ Honda Honda
Fuel ................................................................................. l 300
Fuel ................................................................................. l 300 120
Type ......................................................................... GX GX 120
ydr lic sys em ............................................................ l 200
ydr lic sys em ............................................................ l 200
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Electric system
Cooling Electric system
..................................................................... air air
l ge ...........................................................................
Number of cylinders ................................................. 24
l ge ........................................................................... 24
1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
ec ni l m di ic i ns reser ed. ecc niines m l m diy ic e s n i ed.
p i ns.
Speed .......................................................................
i ns reser c ines m y e s n i p i ns. min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
191
192
TABLE OF CONTENTS
Earth work
BW 212 D-5, BW 212 DH-5, BW 212 PD-5 - Tier 4 220 BW 215 D-40 266
BW 213 D-5, BW 213 DH-5, BW 213 PDH-5 - Tier 4 222 BW 216 D-40, BW 216 PD-40 268
BW 214 D-5 - Tier 4 224 BW 218 D-40 270
BW 216 D-5, BW 216 PD-5 - Tier 4 226
BW 216 DH-5, BW 216 PDH-5 - Tier 4 228 Soil Compactors
BW 213 DH-5/P, BW 213 BVC-5/P - Tier 4 230 BC 473 EB-3 272
BW 213 BVC-5 - Tier 4 232 BC 772 EB-2 274
BW 177 D-5, BW 177 DH-5, BW 177 PDH-5 - Tier 3 234 BC 772 EB-4 276
BW 211 D-5, BW 211 PD-5 - Tier 3 236 BC 473 EB-5 278
BW 213 D-5, BW 213 DH-5, BW 213 PDH-5 - Tier 3 238
193
SINGLE DRUM ROLLERS Standard Equipment
Hydrostatic travel and vibration drive
Opt
Do
BW 124 DH-5, BW 124 PDH-5 (2 Amplitude) Double pump system for travel drive
2 Spring accumulator brakes
B:
L:3
Differential lock Do
Hydrostatic articulated steering Do
Contact scrapers (+
Operating/Control Equipment Sp
- Hour meter Ro
- Charge control EC
- Parking brake TE
- Engine oil pressure W
- Engine temperature Co
- air cleaner pollution
- Fuel level indicator
Warning horn
Transport lashing and lifting points
front/rear
Lockable anti vandal dashboard protection
Back-up alarm
Emergency stop button
ROPS/FOPS with safety belt
Working lights
Seat contact switch
Rear windscreen
Fields of application: Battery disconnect switch
Minor works and medium-size compaction duties in road construction, car parks,
trenches and backfill. D-series models are suitable for granular
Standard materials
Equipment(sand, Optional Equipment
gravel, crushed rock), semi-cohesive soils and hydraulically bound materials.
Hydrostatic travel and vibration drive Dozer blade (+350kg/772lb)
Double pump system for travel drive B:1.515mm/59.6in
PD-series models are primarily used on cohesive soils with high water contents.
2 Spring accumulator brakes L:3.900mm/153.5in
All BW 124 models have high climbing performance with Differential
high-torquelock drive sys- Dozer blade (Pre-installation)
tems. With its high traction, the BW 124 is ideal for use with a dozerarticulated
Hydrostatic blade which
steering Dozer blade with tilting mechanism
Contact scrapers (+440kg/970lb)
transforms the BW 124 into an effective combined unit Operating/Control
for spreading,Equipment
shaping Special painting
and compaction. - Hour meter Rotary beacon
- Charge control ECONOMIZER
194
TECHNICAL
Technical Data
DATA
Technical
Technical
Data Data BOMAG BOMAG
BOMAG
BOMAG BOMAG BOMAG
BW 124 DH-5 BWBW
124124
BW
DH-5
PDH-5
124 DH-5 BW 124BW
PDH-5
124 PDH-5
Weights Weights
Weights
Grossweight .............................................................
Grossweight Grossweight kg
.............................................................
.............................................................
3.950 kg 4.0003.950
kg 3.950 4.000 4.000
Operating weight CECE Operating
...........................................
Operating
weight CECE weight kg...........................................
...........................................
CECE 3.300 kg 3.3903.300
kg 3.300 3.390 3.390
Axle load, drum / wheelsAxle CECE load,
...............................
Axle
drum load,
/ wheels
drum CECE / wheels kg 1.580/1.730kg
...............................
CECE ............................... 1.580/1.730
kg 1.580/1.730
1.600/1.790 1.600/1.790
1.600/1.790
Static linear load CECE ...........................................
Static linear Static
load linear
CECE load ...........................................
CECE kg/cm 13,2 kg/cm
........................................... kg/cm
13,2 13,2
Dimensions Dimensions
Dimensions
Working width ..........................................................
Working width Working ..........................................................
width ..........................................................
mm 1.200 mm mm1.200
1.2001.200 1.200 1.200
Track radius, inner ...................................................
Track radius, Trackinnerradius,
...................................................
inner ...................................................
mm 2.260 mm mm2.260
2.2602.260 2.260 2.260
Driving Characteristics
DrivingDriving
Characteristics
Characteristics
Speed .......................................................................
Speed .......................................................................
Speed .......................................................................
km/h 0- 9,0 km/h km/h
0- 9,0
0- 9,00- 9,0 0- 9,0 0- 9,0
3 Max. gradeability without/with Max. gradeability
vibr.Max.
..........................
gradeability
without/with without/with
vibr.
% ..........................
vibr. 55/55
..........................
% % 55/5555/5555/55 55/55 55/55
0,136 Drive Drive Drive
KubotaKubota
0,167 Engine manufacturer ................................................
Engine manufacturer
Engine manufacturer................................................
Type .........................................................................
................................................
Kubota
Type .........................................................................
Type .........................................................................
V2403
Kubota
V2403V2403
V2403
Kubota Kubota
V2403 V2403
Emission stage .........................................................
EmissionEmissionstage .........................................................
stage .........................................................
Stage V / TIER4f Stage V /Stage
Stage TIER4fV / TIER4f
V / TIER4f Stage V /Stage
TIER4fV / TIER4f
Exhaust gas aftertreatment Exhaust
......................................
gas
Exhaustaftertreatment
gas aftertreatment
......................................
......................................
DPF DPFDPF DPF DPF DPF
Cooling .....................................................................
Cooling .....................................................................
Cooling .....................................................................
water water water
water water water
Number of cylinders .................................................
Number of Number
cylinders of cylinders
.................................................
.................................................
4 4 4 4 4 4
Performance ISO 3046 ............................................
Performance Performance
ISO 3046ISO 3046kW
............................................ kW
............................................
34,0 kW 34,034,0 34,0 34,0 34,0
ng bow, Performance SAE J 1995Performance ........................................
Performance
SAE J 1995 hp ........................................
SAE........................................
J 1995 46,0 hp hp 46,046,0 46,0 46,0 46,0
Speed ....................................................................... min-1
Speed ....................................................................... min-1
Speed .......................................................................
2.400 min-1 2.4002.400
2.400 2.400 2.400
dle Fuel ..........................................................................
Fuel ..........................................................................
Fuel ..........................................................................
Diesel DieselDiesel
Diesel Diesel Diesel
Dimensions in mm
Electric equipment ...................................................
Electric equipment
Electric equipment V
...................................................
...................................................
12 V V 12 12 12 12 12
e plate
Earth work
Drive system ............................................................
Drive Hsystem Drive H1............................................................
systemH2 ............................................................
L L1 hydrost. W hydrost. hydrost.
hydrost. hydrost. hydrost.
w oil Drum driven .............................................................
Drum driven Drum .............................................................
driven .............................................................
standard standard
standard
standard standard standard
BP 10/35 658 962 700 1084 532 350
Drums and Tyres Drums Drums
and Tyres
and Tyres
Tyre12/40
BP size ..................................................................
Tyre658 sizeTyre
..................................................................
size ..................................................................
962 700 1084 5429.5-24 400 4PR 9.5-24
9.5-24
4PR
9.5-24
4PR 4PR 9.5-24 4PR
9.5-24 4PR
Brakes BrakesBrakes
Service brake ...........................................................
Service brake Service ...........................................................
brake ...........................................................
hydrost. hydrost.
hydrost.
hydrost. hydrost. hydrost.
Parking brake ...........................................................
Parking brake Parking ...........................................................
brake ...........................................................
hydromec. hydromec.
hydromec.
hydromec. hydromec.hydromec.
Technical Data BOMAG BOMAG
Steering Steering
Steering
Steering system .......................................................
Steering system Steering.......................................................
system .......................................................
oscil.artic. BP 10/35
oscil.artic.
oscil.artic.
oscil.artic. BP 12/40
oscil.artic.
oscil.artic.
Steering method .......................................................
Steering method Steering.......................................................
method .......................................................
hydrost. hydrost.
hydrost. hydrost. hydrost. hydrost.
Steering / oscillating angleSteering
+/- ..................................
/Steering
oscillating / oscillating
angle +/- angle
..................................
grad +/- ..................................
35/12 grad 35/1235/12
grad35/12 35/12 35/12
Weights
Exciter system
Operating weightExciter CECE Exciter
system system
........................................... kg 65 72
Drive system ............................................................
Drive system Drive............................................................
system ............................................................
hydrost. hydrost.
hydrost.
hydrost. hydrost. hydrost.
Basic weight .............................................................
Frequency ................................................................
Frequency Frequency Hz
................................................................
kg
................................................................
41 Hz
64
Hz 41 41 41
71
41 41
Amplitude .................................................................
AmplitudeAmplitude mm 1,70/0,85 mm
.................................................................
................................................................. 1,60 1,70/0,85
mm1,70/0,85 1,60 1,60
Dimensions
Centrifugal force .......................................................
Centrifugal Centrifugal kN
force .......................................................
force .......................................................
85/43 kN 85 85/43
kN 85/43 85 85
Working
Capacities
width ..........................................................
Capacities Capacities
mm 350 400
Fuel ..........................................................................
Fuel ..........................................................................
Fuel ..........................................................................
l 60,0 l l 60,060,0 60,0 60,0 60,0
Driving Characteristics
Technical modifications reserved. Machines
Technical
may be
modifications
shown
Technical
withreserved.
modifications
options. Machines
reserved.
mayMachines
be shownmay
with be
options.
shown with options.
Working speed, max. ............................................... m/min 25 25
Max. gradeability (dep. on soil con.) ........................ % 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
195
SINGLE DRUM ROLLERS Standard Equipment
BOMAG ECOMODE
Opti
*R
BW 145 D-5, BW 145 DH-5, BW 145 PDH-5 - Tier 4 Double pump system for travel drive
(DH/PDH)
RO
*W
No-Spin differential lock Ind
Rear axle with twin spring accumulator Ro
brakes Re
Hydrostatic travel and vibration drive Air
Hydrostatic articulated steering Sli
Articulated joint lock Ra
Warning, information and operation BO
displays EC
Single lever control for travel and vibration TE
Emergency STOP Pri
Warning horn BO
Back-up warning system BC
Noise insulation Sp
1 Scrapers (D/DH) Re
2 Scrapers (PDH) au
Tractor tires (PDH) Pa
2C
Standard Equipment Optional Equipment Do
Double pump system for travel drive ROPS/FOPS with safety belt Tra
196
TECHNICAL DATA
Technical Data Technical
Technical
Data
Technical
BOMAG
Data Data BOMAG
BOMAGBOMAG BOMAG
BOMAG BOMAGBOMAGBOMAG BOMAG BOMAGBOMAG
BW 145 D-5 BW 145
BWDH-5
145
BWD-5
145
BWD-5
BW
145 145
D-5
BWPDH-5
145
BWDH-5
145
BWDH-5
145 DH-5
BW 145
BWPDH-5
145
BWPDH-5
145 PDH-5
Weights Weights
Weights
Weights
kg ......................................
Grossweight ......................................Grossweight
Grossweight
Grossweight kg 6.000
......................................
5.600 ...................................... kg 5.600kg 5.600 5.6005.600 6.000 6.000 6.000 5.600 5.600 5.600
Operating weight CECE w. ROPS-cabin Operating kgweightOperating
Operating CECE
weight
4.750 w.CECE
weight
ROPS-cabin
w.CECE
ROPS-cabin kg 4.820
w. ROPS-cabinkg 4.750kg 4.750 4.7505.070 4.820 4.820 4.820 5.070 5.070 5.070
Axle load, drum CECE ......................Axle load, kgdrum
Axle load,CECE
Axle
drum load,
......................
2.490CECE drum...................... kg 2.520kg 2.490
CECE ...................... kg 2.490 2.4902.770 2.520 2.520 2.520 2.770 2.770 2.770
Axle load, wheels CECE ...................Axle load, kgwheels
Axle load,Axle
CECE
wheels
load,
2.260 ...................
CECE
wheels................... kg 2.300kg 2.260
CECE ................... kg 2.260 2.2602.300 2.300 2.300 2.300 2.300 2.300 2.300
Static linear load CECE ..................... kg/cm
Static linear
Static
load
linear
Static
CECEloadlinear
17,4 .....................
CECE kg/cm17,6
load.....................
CECE ..................... 17,4kg/cm
kg/cm 17,4 17,4 17,6 17,6 17,6
Dimensions Dimensions
Dimensions
Dimensions
Working width ....................................
WorkingWorking
mm
width ....................................
Working
width1.430
....................................
width ....................................
mm 1.430 mm 1.430
mm 1.430 1.4301.430 1.430 1.430 1.430 1.430 1.430 1.430
Track radius, inner ............................Track radius,
Track
mm inner
radius,
Track
............................
2.890
inner
radius,............................
inner ............................
mm 2.890 mm 2.890
mm 2.890 2.8902.890 2.890 2.890 2.890 2.890 2.890 2.890
Driving Characteristics Driving
Driving
Characteristics
Driving
Characteristics
Characteristics
3 km/h
Speed (1) ..........................................Speed (1)
Speed
..........................................
(1)
Speed
..........................................
0- 4,0 km/h0- 10,0
(1) .......................................... 0- 4,0
km/h0- 4,0km/h 0- 4,00- 10,0 0- 10,0 0- 10,0 0- 10,0 0- 10,0 0- 10,0 0- 10,0
0,136 km/h
Speed (2) ..........................................Speed (2)
Speed
..........................................
(2)
Speed
..........................................
0- 4,5 km/h km/h0- 4,5km/h
(2) .......................................... 0- 4,5 0- 4,5
km/h
Speed (3) ..........................................Speed (3)
Speed
..........................................
(3)
Speed
..........................................
0- 6,5 km/h km/h0- 6,5km/h
(3) .......................................... 0- 6,5 0- 6,5
0,167 km/h
Speed (4) ..........................................Speed (4)
Speed
..........................................
(4)
Speed
..........................................
0- 9,0 km/h km/h0- 9,0km/h
(4) .......................................... 0- 9,0 0- 9,0
Max. gradeability without/with vibr. ...Max. gradeability % gradeability
Max. Max.
without/with
51/48
gradeability
without/with ... vibr. ...%vibr.64/59
vibr.without/with ...% 51/48 % 51/48 51/4864/59 64/59 64/59 64/59 64/59 64/59 64/59
Drive Drive Drive Drive
Engine manufacturer ......................... Engine manufacturer
Engine manufacturer
EngineKubota
.........................
manufacturer
......................... Kubota Kubota Kubota Kubota
......................... Kubota Kubota Kubota Kubota Kubota Kubota Kubota
TypeV3307 CR-T
Type ..................................................Type ..................................................
Type .................................................. V3307 CR-T
.................................................. V3307 CR-T
V3307 CR-T
V3307V3307
CR-TCR-T
V3307 CR-T V3307 CR-TV3307 CR-T
V3307 CR-T V3307 CR-T
V3307 CR-T
Emission stage .................................. EmissionEmission Stage V / TIER4f
stage ..................................
Emission
stage ..................................
stage Stage VStage
.................................. / TIER4f
V Stage
/ TIER4f
V StageStage
/ TIER4f VStage
/ TIER4f
V / TIER4f V Stage
/ TIER4f
V Stage
/ TIER4f Stage V Stage
V / TIER4f / TIER4f
V Stage
/ TIER4f
V / TIER4f
ng bow, Exhaust gas aftertreatment ...............ExhaustExhaust gas DOC+DPF
gas aftertreatment
Exhaustaftertreatment
gas ...............
aftertreatment DOC+DPF
.............................. DOC+DPF DOC+DPF DOC+DPF
DOC+DPF DOC+DPF DOC+DPF DOC+DPF DOC+DPF DOC+DPF DOC+DPF
Cooling ..............................................Cooling Cooling water
..............................................
..............................................
Cooling water water water waterwater water water water
.............................................. water water water
dle Number of cylinders ..........................Number Number of cylinders Number 4 of cylinders
of cylinders
..........................
.......................... 4
.......................... 4 4 4 4 4 4 4 4 4 4
Dimensions
Performance ISO 3046 in .....................
mm PerformancekW ISOPerformance
Performance 3046 55,4
ISO.....................
3046ISO ..................... kW 55,4
3046 ..................... kW 55,4kW 55,4 55,4 55,4 55,4 55,4 55,4 55,4 55,4 55,4
e plate Performance SAE J 1995 .................. Performancehp SAE
Performance 75,0
Performance
J 1995
SAE..................
J 1995SAE.................. hp 75,0
J 1995 .................. hp 75,0hp 75,0 75,0 75,0 75,0 75,0 75,0 75,0 75,0 75,0
Earth work
w oil H
Speed ................................................
H1 H2 L L1 W
min-1 ................................................
Speed ................................................
Speed Speed 2.400 min-12.400
................................................ 2.400
min-1 2.400 2.4002.400 2.400 2.400 2.400
min-1 2.400 2.400 2.400
BP 10/35
Fuel 658 962 700 1084 532 350
...................................................
Fuel ...................................................
Fuel ...................................................
Fuel Diesel Diesel
................................................... Diesel Diesel Diesel
Diesel Diesel Diesel Diesel Diesel Diesel Diesel
Electric equipment ............................. Electric equipment
Electric
V 12 equipment
equipment
Electric
.............................
............................. 12 V 12 V 12
.............................
V 12 12 12 12 12 12 12 12
BP
Drive12/40 658 Drive
system ..................................... 962system 700
Drive 1084 542
.....................................
system
Drive hydrost. 400
.....................................
system hydrost.hydrost. hydrost. hydrost.
hydrost.hydrost. hydrost. hydrost.
..................................... hydrost. hydrost. hydrost.
Drum driven ....................................... Drum driven standard
Drum.......................................
driven
Drum ....................................... standard
driven ....................................... standard
standardstandardstandard standardstandardstandard standardstandardstandard
Drums and Tyres DrumsDrums
and Tyres
Drums
and Tyres
and Tyres
Technical Data
Tyre size ............................................
Tyre sizeTyre
............................................
sizeTyre
............................................
12.5-20
size ............................................
12PR 12.5-2012.5-20
12PR 12.5-20
BOMAG 12PR 12PR
12.5-20
12.4-24/8PR
12PR12.5-20 12.5-20
BOMAG 12PR 12PR
12.5-20 12PR
12.4-24/8PR
12.4-24/8PR
12.4-24/8PR
Brakes BrakesBrakesBrakes
Service brake ....................................Service brake
Service
....................................
brake
Service
hydrost.
....................................
brake ....................................
hydrost.BP 10/35
hydrost. hydrost.BP
hydrost. hydrost. 12/40
hydrost. hydrost. hydrost. hydrost. hydrost. hydrost.
Parking brake ....................................Parking Parking
brake ....................................
brake
Parking
hydromec.
....................................
brake ....................................
hydromec.
hydromec.hydromec.hydromec.
hydromec.
hydromec.hydromec.hydromec. hydromec.hydromec.hydromec.
Weights
Steering Steering Steering Steering
Operating
Steering systemweight CECESteering
................................ ...........................................
Steering
system Steering
................................
systemoscil.artic.
................................kg oscil.artic.
system ................................ 65 oscil.artic.oscil.artic.
oscil.artic. 72 oscil.artic.oscil.artic.
oscil.artic.
oscil.artic. oscil.artic.
oscil.artic.
oscil.artic.
Basic weight
Steering method .............................................................
................................
SteeringSteering
method Steering
................................
methodhydrost. kg hydrost.hydrost.
................................
method ................................ 64 hydrost. hydrost. 71 hydrost. hydrost.
hydrost.hydrost. hydrost. hydrost. hydrost.
Steering / oscillating angle +/- ...........
SteeringSteering
grad
/ oscillating
Steering
/ oscillating
angle
35/12 / +/-
oscillating
angle
...........
+/-angle
...........
+/-
grad 35/12grad35/12
........... grad35/12 35/1235/12 35/12 35/12 35/12 35/12 35/12 35/12
Dimensions
Exciter system ExciterExciter
system Exciter
systemsystem
Working
Drive system width ..........................................................
.....................................
Drive system
Drive .....................................
system
Drive hydrost. mmhydrost.hydrost.
.....................................
system ..................................... 350 hydrost. hydrost. 400 hydrost. hydrost.
hydrost.hydrost. hydrost. hydrost. hydrost.
Hz.........................................
Frequency .........................................Frequency
Frequency Frequency
.........................................Hz 31/35
31/35 ......................................... Hz 31/35
Hz 31/35 31/3531/35 31/35 31/35 31/35 31/35 31/35 31/35
Driving CharacteristicsAmplitude
Amplitude .......................................... mm
Amplitude
..........................................
Amplitude
..........................................
1,70/0,80 mm 1,70/0,80 mm 1,70/0,80
.......................................... mm 1,70/0,801,70/0,80 1,70/0,801,70/0,80
1,70/0,80
1,45/0,70 1,45/0,701,45/0,701,45/0,70
Working speed, max. ............................................... m/min 25 kN 80/56 80/5680/56 80/56
Centrifugal force ................................ kN
Centrifugal
Centrifugal
force Centrifugal
................................
force
80/56 ................................
force kN
................................
80/56kN 80/56 25 80/56 80/56 80/56 80/56 80/56
Centrifugal force ................................ t force Centrifugal
Centrifugal
Centrifugal ................................
force
8,2/5,7
................................t
force ................................ t
8,2/5,7 8,2/5,7
t 8,2/5,7 8,2/5,7 8,2/5,7 8,2/5,7
8,2/5,7 8,2/5,7 8,2/5,7 8,2/5,7 8,2/5,7
Max. gradeability (dep. on soil con.) ........................ % 30 30
Capacities Capacities
Capacities
Capacities
Drive
Fuel ...................................................Fuel ...................................................
Fuel
l ...................................................
Fuel 110,0
...................................................
l 110,0
l 110,0 l 110,0 110,0110,0 110,0 110,0 110,0 110,0 110,0 110,0
Engine manufacturer ................................................
Technical modifications reserved. Machines may be shown
Technical
with options.
modifications
Technical modifications
reserved.
Technical
Machines
modifications
reserved.
mayMachines
bereserved.
shownmay
with
Machines
beoptions.
shownmaywithbe
options.
Honda
shown with options.
Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
197
SINGLE DRUM ROLLERS Standard Equipment
BOMAG ECOMODE
Opti
*R
BW 177 D-5, BW 177 DH-5, BW 177 PDH-5 - Tier 4 Double pump system for travel drive
(DH/PDH)
RO
Tra
No-Spin differential lock *W
Rear axle with twin spring accumulator Ind
brakes Ro
Hydrostatic travel and vibration drive Re
Hydrostatic articulated steering Air
Articulated joint lock Ad
Warning, information and operation Sli
displays Ra
Single lever control for travel and vibration BO
Emergency STOP EC
Warning horn TE
Back-up warning system Pr
Noise insulation BO
2 Contact scrapers Plastic (D/DH) BC
2 Scrapers (PDH) Sp
Tractor tires (PDH) Re
au
Standard Equipment Optional Equipment Pa
Double pump system for travel drive ROPS/FOPS with safety belt En
Rear axle with twin spring accumulator Indicator and hazard lights LE
198
TECHNICAL DATA
Technical Data Technical
Technical
Data
Technical
BOMAG
Data Data BOMAG
BOMAGBOMAG BOMAG
BOMAGBOMAGBOMAGBOMAG BOMAG BOMAG BOMAG
BW 177 D-5 BW 177
BWDH-5
177
BWD-5
177
BWD-5
BW
177 177
D-5
BWPDH-5
177
BWDH-5
177
BWDH-5
177 DH-5
BW 177
BWPDH-5
177
BWPDH-5
177 PDH-5
Weights Weights
Weights
Weights
Grossweight ......................................
Grossweightkg ......................................
GrossweightGrossweight kg
......................................
7.800 ...................................... kg 7.800
8.200 kg 7.800 7.8007.600 8.200 8.200 8.200 7.600 7.600 7.600
Operating weight CECE w. ROPS-cabin Operating kgweightOperating
Operating CECE 6.600
weight w.CECE
weight
ROPS-cabin
w.CECE
ROPS-cabin kg
w. ROPS-cabin kg 6.600
6.700 kg 6.600 6.6006.950 6.700 6.700 6.700 6.950 6.950 6.950
Axle load, drum CECE ...................... Axle load, kgdrum
Axle load,
CECE
Axle
drum load,
......................
4.000CECEdrum...................... kg
CECE ......................kg 4.000
4.050 kg 4.000 4.0004.300 4.050 4.050 4.050 4.300 4.300 4.300
Axle load, wheels CECE ................... Axle load, kgwheels
Axle load,Axle
CECE
wheels
load,
2.600...................
CECE
wheels................... kg
CECE ...................kg 2.600
2.650 kg 2.600 2.6002.650 2.650 2.650 2.650 2.650 2.650 2.650
Static linear load CECE ..................... kg/cm
Static linear
Static
load
linear
Static
CECE loadlinear
23,7.....................
CECE load.....................kg/cm24,0
CECE ..................... 23,7kg/cm
kg/cm 23,7 23,7 24,0 24,0 24,0
Dimensions Dimensions
Dimensions
Dimensions
Working width ....................................
Working Working
width
mm ....................................
Working
width1.690
....................................
width ....................................
mm 1.690 mm 1.690
mm 1.690 1.6901.690 1.690 1.690 1.690 1.690 1.690 1.690
Track radius, inner ............................
Track radius,
Track
mm inner
radius,
Track
............................
2.975
inner
radius, ............................
inner ............................
mm 2.975 mm 2.975
mm 2.975 2.9752.975 2.975 2.975 2.975 2.975 2.975 2.975
Driving Characteristics DrivingDriving
Characteristics
Driving
Characteristics
Characteristics
3 Speed (1) .......................................... km/h
Speed (1)
Speed
..........................................
(1)
Speed km/h 0-10
..........................................
(1) ..........................................
0- 4,5 0- 4,5km/h0- 4,5
km/h 0- 4,50-10 0-10 0-10 0-10 0-10 0-10 0-10
0,136 Speed (2) .......................................... km/h
Speed (2)
Speed
..........................................
(2)
Speed km/h
..........................................
(2) ..........................................
0- 5,5 km/h
0- 5,5km/h0- 5,5 0- 5,5
Speed (3) .......................................... km/h
Speed (3)
Speed
..........................................
(3)
Speed km/h
..........................................
(3) ..........................................
0- 7,5 km/h
0- 7,5km/h0- 7,5 0- 7,5
0,167 Speed (4) .......................................... km/h
Speed (4)
Speed
..........................................
(4)
Speed km/h
..........................................
(4) ..........................................
0- 10,5 km/h
0- 10,5
km/h0- 10,5 0- 10,5
Max. gradeability without/with vibr. ... % gradeability
Max. gradeability
Max. Max.
without/with
gradeability
49/46 without/with ... vibr. ...%vibr.61/58
vibr.without/with ...% 49/46 % 49/46 49/4661/58 61/58 61/58 61/58 61/58 61/58 61/58
Drive Drive Drive Drive
Engine manufacturer ......................... Engine manufacturer
Engine manufacturer
Engine Kubota
.........................
manufacturer
......................... KubotaKubota Kubota Kubota
......................... KubotaKubota Kubota Kubota Kubota Kubota Kubota
Type ..................................................
Type ..................................................
Type ..................................................
TypeV3307 V3307 V3307
..................................................
CR-T CR-T CR-TV3307 CR-T
V3307V3307
CR-TV3307
CR-T CR-T V3307 CR-TV3307 CR-T
V3307 CR-T V3307 CR-T
V3307 CR-T
Emission stage .................................. EmissionEmission
stage ..................................
Emission
stage
Stage ..................................
stage
V / TIER4f Stage V
.................................. Stage
/ TIER4f
V Stage
/ TIER4f
V StageStage
/ TIER4f V / TIER4f
Stage
V / TIER4f V Stage
/ TIER4f
V Stage
/ TIER4f Stage V Stage
V / TIER4f / TIER4f
V Stage V / TIER4f
/ TIER4f
ng bow, Exhaust gas aftertreatment ............... Exhaust Exhaust
gas aftertreatment
Exhaust
gas DOC+DPF
aftertreatment
gas...............
aftertreatment
............... DOC+DPF
............... DOC+DPF DOC+DPF DOC+DPF
DOC+DPF DOC+DPF DOC+DPF DOC+DPF DOC+DPF DOC+DPF DOC+DPF
Cooling ..............................................Cooling ..............................................
Cooling Cooling
..............................................
water water water water waterwater water water water
.............................................. water water water
dle Number of cylinders .......................... Number Number
of cylinders Number
of cylinders
..........................
4 of cylinders
.......................... 4
.......................... 4 4 4 4 4 4 4 4 4 4
Dimensions
Performance ISO 3046 in .....................
mm Performance kW ISOPerformance
Performance 3046 55,4
ISO.....................
3046 ISO.....................kW 55,4
3046 ..................... kW 55,4kW 55,4 55,4 55,4 55,4 55,4 55,4 55,4 55,4 55,4
e plate hp 75,0 hp 75,0hp 75,0 75,0 75,0 75,0 75,0 75,0 75,0
Earth work
Performance SAE J 1995 .................. Performance hp SAE
Performance Performance
J 199575,0
SAE..................
J 1995
SAE..................
J 1995 .................. 75,0 75,0
w oil H
Speed ................................................
H1 H2 L L1 W
min-1 ................................................
Speed ................................................
Speed Speed 2.400 min-1 2.400
................................................ 2.400
min-1 min-12.400 2.4002.400 2.400 2.400 2.400 2.400 2.400 2.400
BP 10/35
Fuel 658 962 700 1084 532 350
...................................................
Fuel ...................................................
Fuel ...................................................
Fuel Diesel Diesel
................................................... Diesel Diesel Diesel
Diesel Diesel Diesel Diesel Diesel Diesel Diesel
Electric equipment ............................. Electric equipment
Electric
V equipment
Electric
.............................
12 equipment
............................. 12 V 12 V 12
.............................
V 12 12 12 12 12 12 12 12
BP
Drive12/40 658 Drive
system ..................................... 962system 700
Drive 1084 542
.....................................
system
Drive hydrost. 400
.....................................
system hydrost.
..................................... hydrost.
hydrost. hydrost. hydrost. hydrost. hydrost. hydrost. hydrost. hydrost. hydrost.
Drum driven ....................................... Drum driven Drumstandard
Drum.......................................
driven ....................................... standard
driven ....................................... standard
standardstandardstandard standardstandardstandard standardstandardstandard
Drums and Tyres DrumsDrums
and Tyres
Drums
and Tyres
and Tyres
Technical Data
Tyre size ............................................
Tyre sizeTyre
............................................
sizeTyre............................................
14.9-24/8PR
size ............................................
14.9-24/8PR
14.9-24/8PR
BOMAG 14.9-24/8PR
14.9-24/8PR
14.9-24/8PR
14.9-24/8PR
BOMAG 14.9-24/8PR
14.9-24/8PR14.9-24/8PR
14.9-24/8PR
14.9-24/8PR
Brakes BrakesBrakesBrakes
Service brake ....................................
Service brake
Service
....................................
brake
Servicehydrost.
....................................
brake .................................... BP
hydrost. 10/35
hydrost. hydrost. hydrost. BP
hydrost. 12/40
hydrost. hydrost. hydrost. hydrost. hydrost. hydrost.
Parking brake ....................................
Parking brake
Parking
....................................
Parking
brake hydromec.
....................................
brake ....................................
hydromec.
hydromec.hydromec.hydromec.
hydromec.
hydromec.hydromec.hydromec. hydromec.hydromec.hydromec.
Weights
Steering Steering Steering Steering
Operating
Steering systemweight CECESteering
................................ ...........................................
Steering
system Steering
................................
system
oscil.artic.
................................kg oscil.artic.
system ................................ 65 oscil.artic.
oscil.artic. oscil.artic. 72 oscil.artic.
oscil.artic.
oscil.artic. oscil.artic. oscil.artic. oscil.artic.
oscil.artic.
Basic
Steering weight .............................................................
method ................................
Steering Steering
method Steering
................................
method
hydrost. kg hydrost.hydrost.
................................
method ................................ 64 hydrost. hydrost.
hydrost. 71 hydrost. hydrost.
hydrost. hydrost. hydrost. hydrost.
Steering / oscillating angle +/- ...........
Steering Steering
/grad
oscillating
Steering
/ oscillating
angle
35/12/ +/-
oscillating
angle
...........
+/-angle
...........
+/-
grad 35/12
grad35/12
........... grad35/12 35/1235/12 35/12 35/12 35/12 35/12 35/12 35/12
Dimensions
Exciter system ExciterExciter
system Exciter
system system
Working
Drive systemwidth ..........................................................
.....................................
Drive system
Drive.....................................
system
Drivehydrost. mmhydrost.hydrost.
.....................................
system ..................................... 350 hydrost. hydrost. 400 hydrost. hydrost.
hydrost.
hydrost. hydrost. hydrost. hydrost.
Frequency (1) .................................... FrequencyHz(1) ....................................
Frequency Frequency
(1)29 Hz 29 Hz 29 Hz 29
....................................
(1) .................................... 29 29 29 29 29 29 29 29
Driving
Frequency (2)Characteristics
....................................
FrequencyHz(2) ....................................
Frequency Frequency
(2)32 Hz 32 Hz 32 Hz 32
....................................
(2) .................................... 32 32 32 32 32 32 32 32
Working speed, max. ............................................... m/min 25
Amplitude ..........................................
Amplitudemm
Amplitude
..........................................
Amplitude mm
..........................................
1,90/0,80 1,90/0,80
mm
.......................................... 1,90/0,80
mm 1,90/0,80
1,90/0,80 25
1,90/0,80
1,75/0,88 1,90/0,80
1,90/0,80 1,75/0,881,75/0,881,75/0,88
Centrifugal force ................................ kNforce Centrifugal
Centrifugal
Centrifugal ................................
force
112/74 kN 112/74
................................
force ................................ kN 112/74
kN 112/74 112/74 112/74112/74 112/74 112/74 112/74 112/74 112/74
Max. gradeability (dep. on soil con.) ........................ % 30 30
Centrifugal force ................................ t force Centrifugal
Centrifugal
Centrifugal ................................
force
11,4/7,5 t
................................ 11,4/7,5
force ................................ t 11,4/7,5
t 11,4/7,511,4/7,5 11,4/7,5 11,4/7,511,4/7,5
11,4/7,5 11,4/7,5 11,4/7,511,4/7,5
Drive
Capacities Capacities Capacities Capacities
Fuel ...................................................
Engine Fuel ...................................................
Fuel
l ...................................................
manufacturer ................................................ Fuel ...................................................
110,0 l 110,0
l Honda
110,0 l 110,0 110,0110,0 Honda
110,0 110,0 110,0 110,0 110,0 110,0
Type .........................................................................
Technical modifications reserved. Machines may be shown
Technical
with options.
modifications
Technical modifications
reserved.
Technical
Machines
modifications
reserved.
mayMachines
bereserved.
shownmay
with
Machines
beoptions.
shown may
with
beoptions.
GX 120
shown with options.
GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
199
SINGLE DRUM ROLLER Standard Equipment
BOMAG ECOMODE
Opti
*R
each site. Instant and infinite adjustment of amplitude and compaction energy
Hydrostatic articulated steering Rotary beacon
Articulated joint lock Indicator and hazard lights
reduces the tendency for loosening at the surface on gravel, sand and anti-frost
Warning, information and operation Padfoot segment kit
layers. displays BCM 05 Documentation system
Single lever control for travel and vibration Special painting
Emergency STOP Environmentally compliant hydraulic oil
PRE 586 06 010
Warning horn Reversing alarm buzzer with broad band
Back-up warning system audio
Noise insulation Rearview camera
2 Contact scrapers Plastic Tractor tires
BOMAG TELEMATIC Measuring- and machine data interface for
third-party suppliers
LED Working lights (Cabin) BOMAG
Hellerwald
D-56154 Boppard
P.O. Box 5162
* Standard delivery with CE conformity Tel. (0)6742 - 1000
Fax (0)6742 - 3090
(valid within European Union)
PRE 586 06 010 210119 Sa03
Dimensions in mm
Dimensions in Amm B D H H2 K L O1 O2 S W
BW 177 BVC-5 A2350 B 1820 D 1230 H 1750 H22800 K 380 L 4550O165 O265 S 20 W 1690
BW 177 BVC-5 2350 1820 1230 1750 2800 380 4550 65 65 20 1690
200
TECHNICAL
Technical Data
DATA
Technical Data BOMAG BOMAG
BW 177 BVC-5 BW 177 BVC-5
Weights Weights
Grossweight ............................................................. kg
Grossweight .............................................................
8.000 kg 8.000
Operating weight CECE Operating
w. ROPS-cabin weight................. kg
CECE w. ROPS-cabin .................
7.000 kg 7.000
Axle load, drum CECE ............................................. kg
Axle load, drum CECE .............................................
4.250 kg 4.250
Axle load, wheels CECE Axle .......................................... kg
load, wheels CECE ..........................................
2.750 kg 2.750
Static linear load CECE ........................................... kg/cm
Static linear load CECE ...........................................
25,1 kg/cm 25,1
Dimensions Dimensions
Working width ..........................................................
Working width ..........................................................
mm 1.690 mm 1.690
Track radius, inner ...................................................
Track radius, inner ...................................................
mm 2.975 mm 2.975
Driving Characteristics
Driving Characteristics
3 Speed (1) .................................................................
Speed (1) .................................................................
km/h 0-10 km/h 0-10
0,136 Max. gradeability without/with
Max. gradeability
vibr. ..........................
without/with vibr.
% ..........................
60/57 % 60/57
Earth work
Electric equipment ...................................................
ElectricH equipment
H1 H2 L V L1 W V
...................................................
12 12
w oil Drive system ............................................................
Drive system ............................................................
hydrost. hydrost.
BP
Drum10/35 Drum658 962 700 1084 532standard
driven ............................................................. 350
driven ............................................................. standard
BP 12/40
Drums 658and
and Tyres Drums 962
Tyres700 1084 542 400
Tyre size ..................................................................
Tyre size ..................................................................
14.9-24/8PR 14.9-24/8PR
Brakes Brakes
Service brake ...........................................................
Service brake ...........................................................
hydrost. hydrost.
Technical Data Parking brake ...........................................................
Parking brake ........................................................... hydromec. BOMAG
hydromec. BOMAG
Steering Steering BP 10/35 BP 12/40
Steering system .......................................................
Steering system .......................................................
oscil.artic. oscil.artic.
Steering method .......................................................
Steering method .......................................................
hydrost. hydrost.
Weights
Steering / oscillating angle Steering
+/- ..................................
/ oscillating angle +/- ..................................
grad 35/12 grad 35/12
Operating weight CECE ........................................... kg 65 72
Exciterweight
Basic system .............................................................
Exciter system kg 64 71
Drive system ............................................................
Drive system ............................................................
hydrost. hydrost.
Frequency (1) ........................................................... Hz
Frequency (1) ...........................................................
28 Hz 28
Dimensions
Amplitude (1) ............................................................ mm
Amplitude (1) ............................................................
0 - 2,20 mm 0 - 2,20
Working width
Centrifugal force ..........................................................
....................................................... kN
Centrifugal force .......................................................
150 mm
kN 350
150 400
Centrifugal force ....................................................... t
Centrifugal force .......................................................
15,3 t 15,3
Driving Characteristics
Capacities Capacities
Working speed, Fuel max. ...............................................
Fuel ..........................................................................
..........................................................................
l 110,0 lm/min 25
110,0 25
Max. gradeability
Technical modifications (dep.
reserved. Machines
Technical
may be on
modifications
shown soil Machines
withreserved.
options. con.) ........................
may be shown with options. % 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
201
SINGLE DRUM ROLLERS Standard Equipment
BOMAG ECOMODE
Opti
*R
202
TECHNICAL
Technical Data DATA
Technical
Technical
Data Data BOMAG BOMAG
BOMAG
BOMAG BOMAG BOMAG
BW 219 D-5 BW
BW 219
BW
219 PD-5
219 D-5
D-5 BW 219BW
PD-5
219 PD-5
Weights Weights
Weights
Grossweight .............................................................
Grossweight Grossweight
.............................................................
.............................................................
kg 22.000 kg 21.00022.000
kg 22.000 21.000 21.000
Operating weight CECE w. Operating
ROPS-cabinOperating
weight .................
CECE
weight w.CECE
ROPS-cabin
kg w. ROPS-cabin
................. kg
19.400................. 20.00019.400
kg 19.400 20.000 20.000
Axle load, drum CECE .............................................
Axle load,Axle drum load,
CECE drum .............................................
CECEkg kg
.............................................
12.800 13.20012.800
kg 12.800 13.200 13.200
Axle load, wheels CECE ..........................................
Axle load,Axle wheels
load,CECEwheels ..........................................
CECE kg
kg ..........................................
6.600 6.800 6.600
kg 6.600 6.800 6.800
Static linear load CECE ...........................................
Static linear Staticloadlinear
CECE load ...........................................
CECE kg/cm kg/cm
...........................................
60,1 kg/cm
60,1 60,1
Dimensions Dimensions
Dimensions
Working width ..........................................................
Working Workingwidth ..........................................................
width ..........................................................
mm 2.130 mm mm2.130
2.130 2.130 2.130 2.130
Track radius, inner ...................................................
Track radius, Trackinnerradius,...................................................
inner ...................................................
mm 4.120 mm mm4.120
4.120 4.120 4.120 4.120
Driving Characteristics
DrivingDriving
Characteristics
Characteristics
3 Speed (1) .................................................................
Speed (1)Speed .................................................................
(1) .................................................................
km/h 0- 4,0 km/h km/h 0- 4,0 0- 4,0
0- 4,0 0- 4,0 0- 4,0
0,136 Speed (2) .................................................................
Speed (2)Speed .................................................................
(2) .................................................................
km/h 0- 5,0 km/h km/h 0- 5,0 0- 5,0
0- 5,0 0- 5,0 0- 5,0
Speed (3) .................................................................
Speed (3)Speed .................................................................
(3) .................................................................
km/h 0- 6,0 km/h km/h 0- 6,0 0- 6,0
0- 6,0 0- 6,0 0- 6,0
0,167 Speed (4) .................................................................
Speed (4)Speed .................................................................
(4) .................................................................
km/h 0- 10,0 km/h km/h 0- 10,00- 10,0
0- 10,0 0- 10,0 0- 10,0
Max. gradeability without/with Max. vibr.
gradeability
Max.
..........................
gradeability
without/with without/with
vibr.
% ..........................
vibr. 50/48
..........................
% 52/50 50/48
% 50/48 52/50 52/50
Drive Drive Drive
Engine manufacturer ................................................
Engine manufacturer
Engine manufacturer ................................................
................................................
Deutz DeutzDeutz
Deutz Deutz Deutz
Type .........................................................................
Type .........................................................................
Type .........................................................................
TCD 6.1 L6 TCDTCD6.16.1
L6 L66.1 L6
TCD TCD 6.1 TCD
L6 6.1 L6
Emission stage .........................................................
EmissionEmission stage .........................................................
stage .........................................................
Stage V / TIER4f Stage
Stage V /Stage
VTIER4f
/ TIER4f
V / TIER4f Stage V /Stage V / TIER4f
TIER4f
ng bow, Exhaust gas aftertreatment Exhaust
......................................
gas
Exhaustaftertreatment
gas aftertreatment
......................................
......................................
DOC+DPF+SCR DOC+DPF+SCR
DOC+DPF+SCR
DOC+DPF+SCR DOC+DPF+SCR
DOC+DPF+SCR
Cooling .....................................................................
Cooling .....................................................................
Cooling .....................................................................
Liquid LiquidLiquid
Liquid Liquid Liquid
dle Number of cylinders .................................................
Number of Number
cylinders of cylinders
.................................................
.................................................
6 6 6 6 6 6
Dimensions
Performance ISO 3046 in ............................................
mm
Performance Performance
ISO 3046ISO ............................................
3046kW kW
............................................
150,0 150,0 150,0
kW 150,0 150,0 150,0
e plate Performance SAE J 1995Performance ........................................
Performance
SAE J 1995 SAE........................................
J 1995 hp
hp ........................................
202,0 202,0 202,0
hp 202,0 202,0 202,0
Earth work
w oil H H1 H2
Speed .......................................................................
L L1
Speed .......................................................................
W
Speed .......................................................................
min-1 2.300 min-1 min-1 2.300 2.300
2.300 2.300 2.300
BP 10/35
Fuel Fuel 658 962 700 1084 532 350
..........................................................................
..........................................................................
Fuel ..........................................................................
Diesel DieselDiesel
Diesel Diesel Diesel
Electric equipment ...................................................
Electric equipment
Electric equipment
...................................................
...................................................
V 12 V V 12 12 12 12 12
BP
Drive12/40 Drive658 962 system700
system ............................................................
system
Drive 1084 542hydrost. 400
............................................................
............................................................ hydrost.
hydrost. hydrost. hydrost. hydrost.
Drum driven .............................................................
Drum driven Drum standard
.............................................................
driven ............................................................. standard
standard standard standardstandard
Drums and Tyres DrumsDrums
and Tyres
and Tyres
Technical Data
Number of pad feet ..................................................
Number of Number
pad feet of ..................................................
pad feet .................................................. 150
BOMAG
150
BOMAG
150
Area of one pad foot ................................................
Area of one Area padof foot
one ................................................ cm2
pad foot ................................................
cm2 cm2 137 137 137
Height of pad feet .....................................................
Height ofHeight pad feet of ..................................................... mm
pad feet .....................................................
mm mmBP10010/35 BP
100 12/40
100
Tyre size ..................................................................
Tyre sizeTyre ..................................................................
size ..................................................................
23.1-26 12PR 23.1-26
23.1-26
23.1-26 12TL 12PR
12PR 23.1-26 12TL
23.1-26 12TL
Weights
Brakes BrakesBrakes
Service brake ...........................................................
Operating weightService CECE brake
Service ...........................................................
brake ...........................................................
........................................... hydrost.
kg hydrost.
65hydrost.
hydrost. hydrost. hydrost.
72
Parking brake ...........................................................
Parking brake Parking ...........................................................
brake ...........................................................
hydromec. hydromec.
hydromec.
hydromec. hydromec.hydromec.
Basic weight ............................................................. kg 64 71
Steering Steering
Steering
Dimensions
Steering system .......................................................
Steering Steering
system .......................................................
system .......................................................
oscil.artic. oscil.artic.
oscil.artic.
oscil.artic. oscil.artic.
oscil.artic.
Steering method .......................................................
Steering Steering
method .......................................................
method .......................................................
hydrost. hydrost.
hydrost. hydrost. hydrost. hydrost.
Working width .......................................................... mm 350 400
Steering / oscillating angle
Steering
+/- ..................................
Steering
/ oscillating / oscillating
angle +/-angle
..................................
grad +/- ..................................
35/12 grad 35/12 35/12
grad35/12 35/12 35/12
Driving Characteristics
Exciter system ExciterExciter systemsystem
Drive system ............................................................
Drive system Drive............................................................
system ............................................................
hydrost. hydrost. hydrost.
hydrost. hydrost. hydrost.
Working speed, max. Frequency
...............................................
Frequency
................................................................
m/min
................................................................
Frequency ................................................................ Hz 26/31 Hz
25 26/31 26/31
Hz 26/31
25
26/31 26/31
Max. gradeability (dep. on soil con.)
Amplitude .................................................................
Amplitude Amplitude
........................
2,10/1,20 mm
.................................................................
%
.................................................................
mm
30
mm2,10/1,20 2,10/1,20
1,90/1,00
30
1,90/1,001,90/1,00
Centrifugal force .......................................................
Centrifugal Centrifugal
force ....................................................... kN
force .......................................................
kN 328/266 kN 328/266 328/266
328/245 328/245 328/245
Drive
Centrifugal force .......................................................
Centrifugal Centrifugal 33,5/27,1 t
force .......................................................
force .......................................................
t t 33,5/27,1 33,5/27,1
33,5/25,0 33,5/25,033,5/25,0
Engine manufacturer ................................................ Honda Honda
Capacities Capacities Capacities
Type .........................................................................
Fuel ..........................................................................
Fuel ..........................................................................
Fuel ..........................................................................
l 280,0 l l GX 120280,0
280,0
280,0 GX
280,0 120
280,0
Emission
Technical modifications stage .........................................................
reserved. Machines
Technical
may bemodifications
shown
Technical
with options.
reserved.
modifications
Machines
reserved.
mayMachines
be shownmay
withbe
options.
shown with options. StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
203
SINGLE DRUM ROLLERS Standard Equipment
BOMAG ECOMODE
Optiona
* ROP
BW 219 DH-5, BW 219 PDH-5 Double pump system for travel drive
No-Spin differential lock
- Slidin
Rearvi
Rear axle with twin spring accumulator Air con
brakes Radio
Hydrostatic travel and vibration drive Pre sta
Hydrostatic articulated steering Comfo
Articulated joint lock adjusta
Seat with arm rest and adj. for position and Rotary
height Indicat
Sliding window BOMA
Battery disconnect switch ECON
Single lever control for travel and vibration TERRA
Warning, information and operation BOMA
displays with LCD BCM 0
Loading mode Specia
Emergency STOP Padfoo
Working lights front / rear Enviro
Back-up alarm Measu
Noise insulation third-p
2 Scrapers Revers
Warning horn audio
Tractor tires (PDH) LED W
Highly
Rock t
Standard Equipment Optional Equipment
BOMAG ECOMODE * ROPS/FOPS cabin with seat belts
* Stand
Double pump system for travel drive - Sliding window
(valid w
No-Spin differential lock Rearview camera
Fields of application: Rear axle with twin spring accumulator Air condition
Heavy duty compaction work on thick fillbrakes
materials. D-series Radio (Bluetooth)
AA B B D DH HH2 H2
K LK O1L O2 O1S O2
W S W
BW 219
BW 219DH-5
DH-5 3255
325523002300
1600 1600
2300 2300
3040 495
3040 6500
495 85 650085 85 40 852130 40 2130
BW 219 PDH-5
BW 219 PDH-5 3255
325523002300
1500 2300
1500 3060
2300 495
3060 6500
49585 85
6500 85 35 852130 35 2130
204
TECHNICAL
Technical Data
DATA
Technical
Technical
Data Data BOMAG BOMAG
BOMAG
BOMAG BOMAG BOMAG
BW 219 DH-5 BWBW
219
219
BWDH-5
PDH-5
219 DH-5 BW 219BW
PDH-5
219 PDH-5
Weights Weights
Weights
Grossweight .............................................................
Grossweight Grossweight kg
.............................................................
.............................................................
22.000 kg kg 22.000
21.00022.000 21.000 21.000
Operating weight CECE w. Operating
ROPS-cabinOperating
weight .................
CECE
weight w.CECE kg w. ROPS-cabin
ROPS-cabin ................. kg
19.400................. kg 19.400
20.00019.400 20.000 20.000
Axle load, drum CECE .............................................
Axle load,Axle drum load,
CECE drum CECEkg
............................................. kg
.............................................
12.800 kg 12.800
13.20012.800 13.200 13.200
Axle load, wheels CECE Axle ..........................................
load,Axlewheelsload,CECEwheels kg ..........................................
..........................................
CECE 6.600 kg kg 6.600
6.800 6.600 6.800 6.800
Static linear load CECE ...........................................
Static linear Static
load linear
CECE load ...........................................
CECE kg/cm kg/cm
...........................................
60,1 60,1
kg/cm 60,1
Dimensions Dimensions
Dimensions
Working width ..........................................................
Working width Working ..........................................................
width ..........................................................
mm 2.130 mm mm2.130
2.130 2.130 2.130 2.130
Track radius, inner ...................................................
Track radius, Trackinnerradius,...................................................
inner ...................................................
mm 4.120 mm mm4.120
4.120 4.120 4.120 4.120
Driving Characteristics
DrivingDriving
Characteristics
Characteristics
3 Speed .......................................................................
Speed .......................................................................
Speed .......................................................................
km/h 0- 10,0 km/h km/h
0- 10,0
0- 10,0
0- 10,0 0- 10,0 0- 10,0
0,136 Max. gradeability without/with
Max. vibr.
gradeability
Max.
..........................
gradeability
without/with without/with
vibr.
% ..........................
vibr. 60/57
..........................
% % 60/57
62/60 60/57 62/60 62/60
Drive Drive Drive
0,167 Engine manufacturer ................................................
Engine manufacturer
Engine manufacturer................................................
................................................
Deutz Deutz
DeutzDeutz Deutz Deutz
Type .........................................................................
Type .........................................................................
Type .........................................................................
TCD 6.1 L6 TCD TCD
6.1 6.1
L6
TCD L66.1 L6 TCD 6.1 L6
TCD 6.1 L6
Emission stage .........................................................
EmissionEmission stage .........................................................
stage .........................................................
Stage V / TIER4f Stage
Stage
V /Stage
V
TIER4f
/ TIER4f
V / TIER4f Stage V /Stage
TIER4fV / TIER4f
Exhaust gas aftertreatment Exhaust
......................................
gas
Exhaust
aftertreatment
gas aftertreatment
......................................
......................................
DOC+DPF+SCR DOC+DPF+SCR
DOC+DPF+SCR
DOC+DPF+SCR DOC+DPF+SCR
DOC+DPF+SCR
Cooling .....................................................................
Cooling .....................................................................
Cooling .....................................................................
Liquid Liquid
LiquidLiquid Liquid Liquid
Number of cylinders .................................................
Number of Number
cylinders of cylinders
.................................................
.................................................
6 6 6 6 6 6
ng bow, Performance ISO 3046 ............................................
Performance Performance
ISO 3046ISO 3046kW
............................................ kW
............................................
150,0 kW 150,0
150,0 150,0 150,0 150,0
Performance SAE J 1995Performance ........................................
Performance
SAE J 1995 hp ........................................
SAE........................................
J 1995 202,0 hp hp 202,0
202,0 202,0 202,0 202,0
dle Speed ....................................................................... min-1
Speed ....................................................................... min-1
Speed .......................................................................
2.300 min-1 2.300 2.300
2.300 2.300 2.300
Dimensions in mm
Fuel ..........................................................................
Fuel ..........................................................................
Fuel ..........................................................................
Diesel Diesel
DieselDiesel Diesel Diesel
e plate
Earth work
Electric equipment ...................................................
Electric equipment
Electric equipment
...................................................
...................................................
V 12 V V 12 12 12 12 12
w oil H H1 H2 L L1 W
Drive system ............................................................
Drive system Drive............................................................
system ............................................................
hydrost. hydrost.
hydrost.
hydrost. hydrost. hydrost.
BP
Drum10/35 658 962 driven 700
driven .............................................................
Drum driven
Drum 1084 532standard 350
.............................................................
............................................................. standard
standard
standard standard standard
Drums
BP and Tyres Drums
12/40 658Drums
and Tyres
962 and Tyres
700 1084 542 400
Number of pad feet ..................................................
Number of Number
pad feet of ..................................................
pad feet .................................................. 150 150 150
Area of one pad foot ................................................
Area of one Area pad of foot cm2
one ................................................ cm2
pad foot ................................................ cm2 137 137 137
Height of pad feet .....................................................
Height of Height
pad feet mm
of ..................................................... mm
pad feet ..................................................... mm 100 100 100
Technical Data Tyre sizeTyre
Tyre size ..................................................................
..................................................................
size ..................................................................
23.1-26 12PR 23.1-26
BOMAG 12PR
23.1-26
23.1-26 12TL 12PR 23.1-26 12TL
BOMAG 23.1-26 12TL
Brakes BrakesBrakes
Service brake ...........................................................
Service brake Service ...........................................................
brake ...........................................................
hydrost. BP 10/35
hydrost.
hydrost.
hydrost. BP 12/40
hydrost. hydrost.
Parking brake ...........................................................
Parking brake Parking ...........................................................
brake ...........................................................
hydromec. hydromec.
hydromec.
hydromec. hydromec.hydromec.
Weights
Steering Steering Steering
Operating
Steering systemweight CECE
Steering system...........................................
.......................................................
Steering oscil.artic. kg
.......................................................
system ....................................................... 65oscil.artic.
oscil.artic.
oscil.artic. 72 oscil.artic.
oscil.artic.
Basic
Steering weight .............................................................
method .......................................................
Steering method hydrost.
Steering....................................................... kg
method ....................................................... 64hydrost.
hydrost. hydrost. 71 hydrost.
hydrost.
Steering / oscillating angle
Steering
+/- ..................................
/Steering
oscillating / oscillating
angle +/- angle 35/12
..................................
grad +/- ..................................
grad 35/12 35/12
grad35/12 35/12 35/12
Dimensions
Exciter system ExciterExciter systemsystem
Working
Drive system width ..........................................................
............................................................
Drive system Drive............................................................ mm
system ............................................................
hydrost. 350
hydrost. hydrost.
hydrost. 400 hydrost.
hydrost.
Frequency ................................................................
Frequency Frequency Hz
................................................................ Hz
................................................................
26/31 Hz 26/31
26/31 26/31 26/31 26/31
Driving Characteristics
Amplitude .................................................................
AmplitudeAmplitude mm 2,10/1,20 mm
.................................................................
................................................................. mm2,10/1,20
1,90/1,00
2,10/1,20 1,90/1,001,90/1,00
Centrifugal force
Working speed,.......................................................
Centrifugal
max. Centrifugal kN
force .......................................................
force .......................................................
............................................... 328/266 kN
m/min kN 25
328/266
328/245
328/266 328/245
25 328/245
Centrifugal force .......................................................
Centrifugal Centrifugal t 33,5/27,1 t
force .......................................................
force ....................................................... t 33,5/27,1
33,5/25,0
33,5/27,1 33,5/25,033,5/25,0
Max. gradeability (dep. on soil con.) ........................ % 30 30
Capacities Capacities
Capacities
Drive
Fuel ..........................................................................
Fuel ..........................................................................
Fuel ..........................................................................
l 280,0 l l 280,0
280,0 280,0 280,0 280,0
Engine manufacturer
Technical modifications reserved. Machines
Technical
may be
................................................
modifications
shown
Technical
withreserved.
options.
modifications
Machines
reserved.
mayMachines
be shownmay
with be
options.
shown with options.
Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
205
SINGLE DRUM ROLLERS Standard Equipment
BOMAG ECOMODE
Option
* ROP
BW 226 DH-5, BW 226 PDH-5 Double pump system for travel drive
No-Spin differential lock
- Slidi
Rearv
Rear axle with twin spring accumulator Air co
brakes Radio
Hydrostatic travel and vibration drive Pre s
Hydrostatic articulated steering Comf
Articulated joint lock adjus
Seat with arm rest and adj. for position and Rotar
height Indica
Sliding window BOMA
Battery disconnect switch ECON
Single lever control for travel and vibration TERR
Warning, information and operation BOMA
displays with LCD BCM
Loading mode Speci
Emergency STOP Padfo
Working lights front / rear Enviro
Back-up alarm Meas
Noise insulation third-p
2 Scrapers Reve
Warning horn audio
Tractor tires (PDH) LED W
Highly
Rock
Standard Equipment Optional Equipment
BOMAG ECOMODE * ROPS/FOPS cabin with seat belts
* Stan
Double pump system for travel drive - Sliding window
(valid
Fields of application: No-Spin differential lock Rearview camera
Rear axle with twin spring accumulator Air condition
Heavy duty compaction work on thick fill materials. D-series
brakes Radio (Bluetooth)
models are suitable for the compaction of hydraulically
Hydrostatic travel and vibration drive Pre start cabin heating
206
TECHNICAL
Technical Data
DATA
Technical
Technical
Data Data BOMAG BOMAG
BOMAG
BOMAG BOMAG BOMAG
BW 226 DH-5 BW
BW226
226
BWDH-5
PDH-5
226 DH-5 BW 226BW
PDH-5
226 PDH-5
Weights Weights
Weights
Grossweight .............................................................
Grossweight Grossweight
.............................................................
.............................................................
kg 26.710 kg 27.50026.710
kg 26.710 27.500 27.500
Operating weight CECE w. Operating
ROPS-cabinOperating
weight .................
CECE
weight w.CECE
ROPS-cabin
kg w. ROPS-cabin
................. kg
25.000................. 25.74025.000
kg 25.000 25.740 25.740
Axle load, drum CECE .............................................
Axle load,Axle drum load,
CECE drum .............................................
CECEkg 17.070 kg
............................................. 17.80017.070
kg 17.070 17.800 17.800
Axle load, wheels CECE Axle ..........................................
load,Axlewheels
load,CECEwheels ..........................................
CECE 7.930 kg
kg .......................................... 7.940 7.930
kg 7.930 7.940 7.940
Static linear load CECE ...........................................
Static linear Staticloadlinear
CECE load ...........................................
CECE kg/cm 80,1 kg/cm
........................................... kg/cm
80,1 80,1
Dimensions Dimensions
Dimensions
Working width ..........................................................
Working Workingwidth ..........................................................
width ..........................................................
mm 2.130 mm mm2.130
2.130 2.130 2.130 2.130
Track radius, inner ...................................................
Track radius, Trackinnerradius,...................................................
inner ...................................................
mm 4.260 mm mm4.260
4.260 4.260 4.260 4.260
Driving Characteristics
DrivingDriving
Characteristics
Characteristics
3 Speed .......................................................................
Speed .......................................................................
Speed .......................................................................
km/h 0- 10,0 km/h km/h
0- 10,0
0- 9,0 0- 10,0 0- 9,0 0- 9,0
0,136 Max. gradeability without/with
Max. vibr.
gradeability
Max.
..........................
gradeability
without/with without/with
vibr.
% ..........................
vibr. 50/47
..........................
% % 50/47
52/49 50/47 52/49 52/49
Earth work
Electric equipment ...................................................
Electric
H equipment
Electric
H1 H2 Lequipment
...................................................
...................................................
V L1 W 12 V V 12 12 12 12 12
w oil Drive system ............................................................
Drive system Drive............................................................
system ............................................................
hydrost. hydrost.
hydrost. hydrost. hydrost. hydrost.
BP
Drum10/35 658 962 driven 700
driven .............................................................
Drum driven
Drum 1084 532standard 350
.............................................................
............................................................. standard
standard standard standardstandard
Drums
BP and Tyres Drums
12/40 658Drums
and Tyres
962 and Tyres
700 1084 542 400
Number of pad feet ..................................................
Number of Number
pad feet of ..................................................
pad feet .................................................. 150 150 150
Area of one pad foot ................................................
Area of one Area padof foot
one ................................................
pad foot ................................................
cm2 cm2 cm2 137 137 137
Height of pad feet .....................................................
Height ofHeight pad feet of .....................................................
pad feet .....................................................
mm mm mm 100 100 100
Technical Data Tyre sizeTyre
Tyre size ..................................................................
..................................................................
size ..................................................................
23.5-25 16PR
BOMAG 23.5-25
750/65
23.5-25 R26 16PR
16PR 750/65 R26
750/65 R26
BOMAG
Brakes BrakesBrakes
Service brake ...........................................................
Service brake Service ...........................................................
brake ...........................................................
hydrost. BP 10/35
hydrost.
hydrost.
hydrost. BP 12/40
hydrost. hydrost.
Parking brake ...........................................................
Parking brake Parking ...........................................................
brake ...........................................................
hydromec. hydromec.
hydromec.
hydromec. hydromec.hydromec.
Weights
Steering Steering Steering
Operating
Steering systemweight CECE
Steering ...........................................
.......................................................
Steering
system oscil.artic. kg
.......................................................
system ....................................................... 65oscil.artic.
oscil.artic.
oscil.artic. 72 oscil.artic.
oscil.artic.
Basic weight
Steering method .............................................................
.......................................................
Steering Steering
method ....................................................... kg
method .......................................................
hydrost. 64hydrost.
hydrost. hydrost. 71 hydrost.
hydrost.
Steering / oscillating angle
Steering
+/- ..................................
Steering
/ oscillating / oscillating
angle +/-angle
..................................
grad +/- ..................................
35/12 grad 35/12 35/12
grad35/12 35/12 35/12
Dimensions
Exciter system ExciterExciter systemsystem
Working
Drive system width ..........................................................
............................................................
Drive system Drive............................................................ mm
system ............................................................
hydrost. 350 hydrost.
hydrost.
hydrost. 400 hydrost.
hydrost.
Frequency ................................................................
Frequency Frequency
................................................................ Hz
................................................................
Hz 26/26 26/26 26/26
Hz 26/26 26/26 26/26
Driving Characteristics
Amplitude .................................................................
Amplitude Amplitude 2,10/1,20 mm
.................................................................
.................................................................
mm mm2,10/1,20
1,70/0,90
2,10/1,20 1,70/0,901,70/0,90
Working speed,
Centrifugal force max. ...............................................
.......................................................
Centrifugal Centrifugal
force ....................................................... m/min
kN
force .......................................................
kN 328/187 kN 25 328/175
328/187 328/187 25 328/175
328/175
Centrifugal force .......................................................
Centrifugal Centrifugal
force .......................................................
Max. gradeability (dep. on soil con.) ........................ % force t
.......................................................
t 33,5/19,1 t 33,5/19,1
30 33,5/17,9
33,5/19,1 30 33,5/17,9
33,5/17,9
Capacities Capacities
Capacities
Drive
Fuel ..........................................................................
Fuel ..........................................................................
Fuel ..........................................................................
l 280,0 l l 280,0
280,0 280,0 280,0 280,0
Engine manufacturer
Technical modifications reserved. Machines
Technical
may be
................................................
modifications
shown
Technical
with reserved.
options.
modifications
Machines
reserved.
mayMachines
be shownmay
withbe
options.
shown with options.
Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
207
SINGLE DRUM ROLLER Standard Equipment
BOMAG ECOMODE
Option
* RO
208
TECHNICAL
Technical Data
DATA
Technical Data BOMAG BOMAG
BW 219 BVC-5 BW 219 BVC-5
Weights Weights
Grossweight .............................................................
Grossweight ............................................................. kg 23.000 kg 23.000
Operating weight CECE w. Operating
ROPS-cabin weight CECE w. ROPS-cabin
................. kg .................
20.300 kg 20.300
Axle load, drum CECE .............................................
Axle load, drum CECE ............................................. kg 13.500 kg 13.500
Axle load, wheels CECE Axle load, wheels CECE ..........................................
.......................................... kg 6.800 kg 6.800
Static linear load CECE
Static linear load CECE ........................................... ...........................................
kg/cm 63,4 kg/cm 63,4
Dimensions Dimensions
Working width ..........................................................
Working width .......................................................... mm 2.130 mm 2.130
Track radius, inner ...................................................
Track radius, inner ................................................... mm 4.120 mm 4.120
Driving Characteristics
Driving Characteristics
3 Speed .......................................................................
Speed ....................................................................... km/h 0- 10,0 km/h 0- 10,0
Max. vibr.
0,136 Max. gradeability without/with gradeability without/with vibr.
.......................... % ..........................
59/56 % 59/56
Drive Drive
0,167 Engine manufacturer ................................................
Engine manufacturer ................................................
Deutz Deutz
Type .........................................................................
Type ......................................................................... TCD 6.1 L6 TCD 6.1 L6
Emission stage .........................................................
Emission stage ......................................................... Stage V / TIER4f Stage V / TIER4f
Exhaust gas aftertreatment Exhaust gas aftertreatment ......................................
...................................... DOC+DPF+SCR DOC+DPF+SCR
Cooling .....................................................................
Cooling ..................................................................... Liquid Liquid
Number of cylinders .................................................
Number of cylinders ................................................. 6 6
ng bow, Performance ISO 3046 ............................................
Performance ISO 3046 ............................................ kW 150,0 kW 150,0
Performance SAE J 1995Performance SAE J 1995 ........................................
........................................ hp 202,0 hp 202,0
dle Speed .......................................................................
Speed ....................................................................... min-1 2.300 min-1 2.300
Dimensions in mm Fuel ..........................................................................
Fuel .......................................................................... Diesel Diesel
e plate
Earth work
Electric equipment ...................................................
Electric equipment ................................................... V 12 V 12
w oil H H1 H2 L L1 W
Drive system ............................................................
Drive system ............................................................ hydrost. hydrost.
BP
Drum10/35 Drum 658driven 962 700 1084 532standard 350
.............................................................
driven ............................................................. standard
Drums
BP and Tyres Drums
12/40 658 and Tyres
962 700 1084 542 400
Tyre size ..................................................................
Tyre size .................................................................. 23,1-26 12PR 23,1-26 12PR
Brakes Brakes
Service brake ...........................................................
Service brake ........................................................... hydrost. hydrost.
Technical Data Parking brake ...........................................................
Parking brake ........................................................... hydromec. BOMAG
hydromec. BOMAG
Steering Steering BP 10/35 BP 12/40
Steering system .......................................................
Steering system ....................................................... oscil.artic. oscil.artic.
Steering method .......................................................
Steering method ....................................................... hydrost. hydrost.
Weights
Steering / oscillating angle Steering / oscillating angle +/- ..................................
+/- .................................. grad 35/12 grad 35/12
Operating weight CECE ........................................... kg 65 72
Exciterweight
Basic Exciter system
system ............................................................. kg 64 71
Drive system ............................................................
Drive system ............................................................ hydrost. hydrost.
Frequency ................................................................
Frequency ................................................................ Hz 26 Hz 26
Dimensions Amplitude (1) ............................................................
Amplitude (1) ............................................................ mm 0 - 2,70 mm 0 - 2,70
Working width
Centrifugal force ..........................................................
Centrifugal force .......................................................
....................................................... kN 500 mm
kN 350
500 400
Centrifugal force .......................................................
Centrifugal force ....................................................... t 51,0 t 51,0
Driving
Capacities
Characteristics Capacities
Working speed, max. ...............................................
Fuel ..........................................................................
Fuel .......................................................................... l 280,0 m/min
l 25
280,0 25
Max. gradeability
Technical modifications (dep.
Technical
reserved. Machines may be on
modifications
shown soil Machines
with reserved.
options. con.)may........................
be shown with options. % 30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
209
SINGLE DRUM ROLLER Standard Equipment
BOMAG ECOMODE
Optio
* RO
Fields of application:
Standard Equipment Optional Equipment
BOMAG VARIOCONTROL single drum rollers can be used on BOMAG
a wide ECOMODE
range of earth- * ROPS/FOPS cabin with seat belts
works and highway construction applications. Compared to conventional
BOMAG VARIOCONTROL single - Sliding window
210
TECHNICAL
Technical Data
DATA
Technical Data BOMAG BOMAG
BW 226 BVC-5 BW 226 BVC-5
Weights Weights
Grossweight .............................................................
Grossweight .............................................................
kg 27.580 kg 27.580
Operating weight CECE w. Operating
ROPS-cabin weight .................
CECE w. ROPS-cabin
kg .................
25.880 kg 25.880
Axle load, drum CECE .............................................
Axle load, drum CECE .............................................
kg 17.930 kg 17.930
Axle load, wheels CECE ..........................................
Axle load, wheels CECE ..........................................
kg 7.950 kg 7.950
Static linear load CECE ...........................................
Static linear load CECE ...........................................
kg/cm 84,2 kg/cm 84,2
Dimensions Dimensions
Working width ..........................................................
Working width ..........................................................
mm 2.130 mm 2.130
Track radius, inner ...................................................
Track radius, inner ...................................................
mm 4.260 mm 4.260
Driving Characteristics
Driving Characteristics
3 Speed .......................................................................
Speed .......................................................................
km/h 0- 9,0 km/h 0- 9,0
0,136 Max. gradeability without/with
Max. vibr.
gradeability
..........................
without/with vibr.
% ..........................
50/47 % 50/47
Drive Drive
0,167 Engine manufacturer ................................................
Engine manufacturer ................................................
Deutz Deutz
Type .........................................................................
Type .........................................................................
TCD 6.1 L6 TCD 6.1 L6
Emission stage .........................................................
Emission stage .........................................................
Stage V / TIER4f Stage V / TIER4f
Exhaust gas aftertreatment Exhaust
......................................
gas aftertreatment ......................................
DOC+DPF+SCR DOC+DPF+SCR
Cooling .....................................................................
Cooling .....................................................................
Liquid Liquid
Number of cylinders .................................................
Number of cylinders ................................................. 6 6
ng bow, Performance ISO 3046 ............................................
Performance ISO 3046 ............................................
kW 150,0 kW 150,0
Performance SAE J 1995Performance ........................................
SAE J 1995 ........................................
hp 202,0 hp 202,0
dle Speed .......................................................................
Speed .......................................................................
min-1 2.300 min-1 2.300
Dimensions in mm
Fuel ..........................................................................
Fuel ..........................................................................
Diesel Diesel
e plate
Earth work
Electric equipment ...................................................
Electric equipment ...................................................
V 12 V 12
w oil H H1 H2 L L1 W
Drive system ............................................................
Drive system ............................................................
hydrost. hydrost.
BP
Drum10/35 658 driven 962 700 1084 532standard
driven .............................................................
Drum 350
............................................................. standard
Drums
BP and Tyres Drums
12/40 658 and Tyres
962 700 1084 542 400
Tyre size ..................................................................
Tyre size ..................................................................
23.5-25 16PR 23.5-25 16PR
Brakes Brakes
Service brake ...........................................................
Service brake ...........................................................
hydrost. hydrost.
Technical Data Parking brake ...........................................................
Parking brake ........................................................... hydromec. BOMAG
hydromec. BOMAG
Steering Steering BP 10/35 BP 12/40
Steering system .......................................................
Steering system .......................................................
oscil.artic. oscil.artic.
Steering method .......................................................
Steering method .......................................................
hydrost. hydrost.
Weights
Steering / oscillating angle Steering
+/- ..................................
/ oscillating angle +/- ..................................
grad 35/12 grad 35/12
Operating weight CECE ........................................... kg 65 72
Exciterweight
Basic system .............................................................
Exciter system kg 64 71
Frequency ................................................................
Frequency ................................................................
Hz 26 Hz 26
Amplitude (1) ............................................................
Amplitude (1) ............................................................
mm 0 - 2,70 mm 0 - 2,70
Dimensions
Centrifugal force .......................................................
Centrifugal force .......................................................
kN 500 kN 500
Working width
Centrifugal force ..........................................................
.......................................................
Centrifugal force .......................................................
t 51,0 mm
t 350
51,0 400
Vario system
Driving Vario system
Characteristics
Drive system ............................................................
Drive system ............................................................
hydrost. hydrost.
Working speed, max. ............................................... m/min 25 25
Capacities
Max. gradeabilityCapacities (dep. on soil con.) ........................
Fuel ..........................................................................
Fuel ..........................................................................
l 280,0 %
l 30
280,0 30
Technical modifications reserved. Machines
Technical
may bemodifications
shown with options.
reserved. Machines may be shown with options.
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
211
SINGLE DRUM ROLLER Standard Equipment
BOMAG ECOMODE
Opt
*R
Dimensions in mm
Dimensions in mm
A A BB DD H
H H2 K K
H2 L L O1 O1O2 O2
S SW W
BW 226
BW DI-5
226 DI-5 3360
3360 2500
2500 1750
1750 2340
2340 3080 430430 67506750
3080 185 185185 185
35 35
2130 2130
212
TECHNICAL
Technical Data
DATA
Technical Data BOMAG BOMAG
BW 226 DI-5 BW 226 DI-5
Weights Weights
Grossweight ............................................................. kg
Grossweight .............................................................
26.930 kg 26.930
Operating weight CECE w. Operating
ROPS-cabin weight ................. kg
CECE w. ROPS-cabin .................
25.250 kg 25.250
Axle load, drum CECE ............................................. kg
Axle load, drum CECE .............................................
17.950 kg 17.950
Axle load, wheels CECE Axle .......................................... kg
load, wheels CECE ..........................................
7.300 kg 7.300
Dimensions Dimensions
Working width ..........................................................
Working width ..........................................................
mm 2.130 mm 2.130
Track radius, inner ...................................................
Track radius, inner ...................................................
mm 4.260 mm 4.260
Driving Characteristics
Driving Characteristics
Speed .......................................................................
Speed .......................................................................
km/h 0- 9,0 km/h 0- 9,0
3 Max. gradeability without/with Max. vibr.
gradeability
..........................
without/with vibr.
% ..........................
50/47 % 50/47
0,136 Drive Drive
Deutz
0,167 Engine manufacturer ................................................
Engine manufacturer ................................................
Type .........................................................................
Deutz
Type .........................................................................
TCD 6.1 L6 TCD 6.1 L6
Emission stage .........................................................
Emission stage .........................................................
Stage V / TIER4f Stage V / TIER4f
Exhaust gas aftertreatment Exhaust
......................................
gas aftertreatment ......................................
DOC+DPF+SCR DOC+DPF+SCR
Cooling .....................................................................
Cooling .....................................................................
Liquid Liquid
Number of cylinders .................................................
Number of cylinders .................................................
6 6
Performance ISO 3046 ............................................ kW
Performance ISO 3046 ............................................ 150,0 kW 150,0
ng bow, Performance SAE J 1995Performance ........................................ hp
SAE J 1995 ........................................
202,0 hp 202,0
Speed ....................................................................... min-1
Speed .......................................................................
2.300 min-1 2.300
dle Fuel ..........................................................................
Fuel ..........................................................................
Diesel Diesel
Dimensions in mm
Electric equipment ................................................... V
Electric equipment ...................................................
12 V 12
e plate
Earth work
Drive system ............................................................
Drive system ............................................................ hydrost.
w oil H H1 H2 L L1 hydrost. W
Drum driven .............................................................
Drum driven .............................................................
standard standard
BP 10/35 658 962 700 1084 532 350
Drums and Tyres Drums and Tyres
Tyre size ..................................................................
Tyre size ..................................................................
BP 12/40 658 962 700 1084 542750/65 400 R26 750/65 R26
Brakes Brakes
Service brake ...........................................................
Service brake ...........................................................
hydrost. hydrost.
Parking brake ...........................................................
Parking brake ...........................................................
hydromec. hydromec.
Technical Data BOMAG BOMAG
Steering Steering
Steering system .......................................................
Steering system .......................................................
oscil.artic. oscil.artic.
BP 10/35 BP 12/40
Steering method .......................................................
Steering method .......................................................
hydrost. hydrost.
Steering / oscillating angle Steering
+/- ..................................
/ oscillating angle +/- ..................................
grad 35/12 grad 35/12
Weights
Exciter system
Operating weight Exciter
CECE system
........................................... kg 65 72
Frequency ................................................................ Hz 26
Frequency ................................................................ Hz 26
Basic weight .............................................................
Amplitude (1) ............................................................ mm 0 - 2,50
Amplitude (1) ............................................................
kg
mm
64
0 - 2,50
71
Centrifugal force ....................................................... kN 500
Centrifugal force ....................................................... kN 500
Dimensions
Centrifugal force ....................................................... t 51,0
Centrifugal force ....................................................... t 51,0
Working
Vario system
width ..........................................................
Vario system
mm 350 400
Drive system ............................................................
Drive system ............................................................
hydrost. hydrost.
Driving Characteristics
Capacitiesspeed, max.
Working Capacities ............................................... m/min 25 25
Fuel ..........................................................................
Fuel ..........................................................................
l 280,0 l 280,0
Max. gradeabilityTechnical (dep.
Technical modifications reserved. Machines may be
on options.
modifications
soil Machines
shown withreserved.
con.) ........................ %
may be shown with options.
30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
213
SINGLE DRUM ROLLER Standard Equipment
BOMAG ECOMODE
Opt
*R
214
TECHNICAL
Technical Data DATA
Technical Data BOMAG BOMAG
BW 226 RC-5 BW 226 RC-5
Weights Weights
Grossweight .............................................................
Grossweight .............................................................
kg 27.910 kg 27.910
Operating weight CECE w. Operating
ROPS-cabin weight .................
CECE w. ROPS-cabin
kg .................
26.300 kg 26.300
Axle load, drum CECE .............................................
Axle load, drum CECE .............................................
kg 19.000 kg 19.000
Axle load, wheels CECE Axle ..........................................
load, wheels CECE ..........................................
kg 7.300 kg 7.300
Dimensions Dimensions
Working width ..........................................................
Working width ..........................................................
mm 2.130 mm 2.130
Track radius, inner ...................................................
Track radius, inner ...................................................
mm 4.180 mm 4.180
Driving Characteristics
Driving Characteristics
Speed .......................................................................
Speed .......................................................................
km/h 0- 9,0 km/h 0- 9,0
3 Max. gradeability without/with Max. vibr.
gradeability
..........................
without/with vibr.
% ..........................
42/37 % 42/37
0,136 Drive Drive
Deutz
0,167 Engine manufacturer ................................................
Engine manufacturer ................................................
Type .........................................................................
Deutz
Type .........................................................................
TCD 6.1 L6 TCD 6.1 L6
Emission stage .........................................................
Emission stage .........................................................
Stage V / TIER4f Stage V / TIER4f
Exhaust gas aftertreatment Exhaust
......................................
gas aftertreatment ......................................
DOC+DPF+SCR DOC+DPF+SCR
Cooling .....................................................................
Cooling .....................................................................
Liquid Liquid
Number of cylinders .................................................
Number of cylinders .................................................
6 6
Performance ISO 3046 ............................................
Performance ISO 3046 ............................................
kW 150,0 kW 150,0
ng bow, Performance SAE J 1995Performance ........................................
SAE J 1995 ........................................
hp 202,0 hp 202,0
Speed .......................................................................
Speed .......................................................................
min-1 2.300 min-1 2.300
dle Fuel ..........................................................................
Fuel ..........................................................................
Diesel Diesel
Dimensions in mm
Electric equipment ...................................................
Electric equipment ...................................................
V 12 V 12
e plate Drive system ............................................................
Drive system ............................................................
hydrost. hydrost.
Earth work
w oil H H1 H2
Drum driven .............................................................
L L1
Drum driven .............................................................
standard
W standard
BP
Drums10/35and Tyres Drums 658 and 962 Tyres 700 1084 532 350
Tyre size ..................................................................
Tyre size ..................................................................
BP 12/40 658 962 700 1084 54226.5-25 40028PR 26.5-25 28PR
Brakes Brakes
Service brake ...........................................................
Service brake ...........................................................
hydrost. hydrost.
Parking brake ...........................................................
Parking brake ...........................................................
hydromec. hydromec.
Technical Data BOMAG BOMAG
Steering Steering
Steering system .......................................................
Steering system .......................................................
oscil.artic. oscil.artic.
BP 10/35 BP 12/40
Steering method .......................................................
Steering method .......................................................
hydrost. hydrost.
Steering / oscillating angle Steering
+/- ..................................
/ oscillating angle +/- ..................................
grad 35/12 grad 35/12
Weights
Exciter system
Operating weightExciter CECEsystem ........................................... kg 65 72
Frequency ................................................................
Frequency ................................................................
Hz 26 Hz 26
Basic
Amplitudeweight .............................................................
(1) ............................................................
Amplitude (1) ............................................................
mm 0 - 2,30 kg
mm 64
0 - 2,30 71
Centrifugal force .......................................................
Centrifugal force .......................................................
kN 500 kN 500
Dimensions
Centrifugal force .......................................................
Centrifugal force .......................................................
t 51,0 t 51,0
Working
Vario system width ..........................................................
Vario system mm 350 400
Drive system ............................................................
Drive system ............................................................
hydrost. hydrost.
Driving Characteristics
Capacities Capacities
Working speed, max. ...............................................
Fuel ..........................................................................
Fuel ..........................................................................
l 280,0
m/min 25
l 280,0
25
Max. gradeabilityTechnical
Technical modifications reserved. Machines
(dep.
may be
on options.
modifications
soil Machines
shown with reserved.
con.) ........................ %
may be shown with options.
30 30
Drive
Engine manufacturer ................................................ Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
215
SINGLE DRUM ROLLERS Standard Equipment
BOMAG ECOMODE
Opti
*R
216
TECHNICAL
Technical Data DATA
Technical
Technical
Data Data BOMAG BOMAG
BOMAG
BOMAG BOMAG BOMAG
BW 211 D-5 BWBW
211211
BW
D-5PD-5
211 D-5 BW 211BW
PD-5
211 PD-5
Weights Weights
Weights
Grossweight .............................................................
Grossweight Grossweight kg
.............................................................
.............................................................
12.890 kg kg 12.890 12.890
12.750 12.750 12.750
Operating weight CECE Operating
w. ROPS-cabin Operating
weight.................
CECE
weight w.CECE kgw. ROPS-cabin
ROPS-cabin .................
10.600 kg
................. kg 10.600 10.600
12.100 12.100 12.100
Axle load, drum CECE .............................................
Axle load,Axle drum load,
CECEdrum CECEkg
.............................................
.............................................
5.670 kg kg 5.670
7.1705.670 7.170 7.170
Axle load, wheels CECEAxle ..........................................
load,Axlewheelsload,CECE
wheels ..........................................
CECE kg ..........................................
4.930 kg kg 4.930
4.9304.930 4.930 4.930
Static linear load CECE ...........................................
Static linear Static
load linear
CECE load ...........................................
CECE kg/cm kg/cm
...........................................
26,6 26,6
kg/cm 26,6
Dimensions Dimensions
Dimensions
Working width ..........................................................
Working width Working ..........................................................
width ..........................................................
mm 2.130 mm mm2.130
2.1302.130 2.130 2.130
Track radius, inner ...................................................
Track radius, Trackinnerradius,
...................................................
inner ...................................................
mm 3.680 mm mm3.680
3.6803.680 3.680 3.680
Driving Characteristics
DrivingDriving
Characteristics
Characteristics
3 Speed (1) .................................................................
Speed (1)Speed km/h
.................................................................
(1) .................................................................
0- 5,0 km/h km/h
0- 5,0
0- 5,00- 5,0 0- 5,0 0- 5,0
0,136 Speed (2) .................................................................
Speed (2)Speed .................................................................
(2) .................................................................
km/h 0- 6,0 km/h 0- 6,0
km/h 0- 6,00- 6,0 0- 6,0 0- 6,0
Speed (3) .................................................................
Speed (3)Speed .................................................................
(3) .................................................................
km/h 0- 8,0 km/h 0- 8,0
km/h 0- 8,00- 8,0 0- 8,0 0- 8,0
0,167 Speed (4) .................................................................
Speed (4)Speed .................................................................
(4) .................................................................
km/h 0- 11,0 km/h 0- 11,0
km/h 0- 11,0
0- 11,0 0- 11,0 0- 11,0
Max. gradeability without/with Max. gradeability
vibr.Max.
..........................
gradeability
without/with without/with
vibr.
% ..........................
vibr. 51/48
..........................
% % 51/4854/5151/48 54/51 54/51
Drive Drive Drive
Engine manufacturer ................................................
Engine manufacturer
Engine manufacturer Deutz
................................................
................................................ DeutzDeutz
Deutz Deutz Deutz
Type ......................................................................... TCD 3.6 L4
Type .........................................................................
Type ......................................................................... TCD TCD
3.6 3.6
L4
TCD L43.6 L4 TCD 3.6 L4
TCD 3.6 L4
Emission stage .........................................................
EmissionEmission Stage IV / TIER4f
stage .........................................................
stage ......................................................... Stage
Stage / IV
IV Stage/ TIER4f
TIER4f
IV / TIER4f Stage IV Stage
/ TIER4f
IV / TIER4f
ng bow, Exhaust gas aftertreatment Exhaust
......................................
gas
Exhaust
aftertreatment
gas aftertreatment DOC+SCR
......................................
...................................... DOC+SCR
DOC+SCR DOC+SCR DOC+SCR DOC+SCR
Cooling ..................................................................... Liquid
Cooling .....................................................................
Cooling ..................................................................... LiquidLiquid
Liquid Liquid Liquid
dle Number of cylinders .................................................
Number of Number
cylinders of cylinders 4
.................................................
................................................. 4 4 4 4 4
Dimensions
Performance ISO 3046 in ............................................
mm
Performance Performance
ISO 3046ISO 3046kW 95,0
............................................ kW
............................................ kW 95,095,0 95,0 95,0 95,0
e plate Performance SAE J 1995Performance ........................................
Performance
SAE J 1995 SAE........................................
J 1995hp ........................................
128,0 hp 128,0128,0
hp 128,0 128,0 128,0
Earth work
w oil H H1 H2
Speed .......................................................................
L min-1
L1 2.000
Speed .......................................................................
W min-1
Speed ....................................................................... min-1 2.0002.000
2.000 2.000 2.000
BP 10/35
Fuel 658 962 700 1084 532 350
..........................................................................
Fuel ..........................................................................
Fuel Diesel
.......................................................................... DieselDiesel
Diesel Diesel Diesel
Electric equipment ...................................................
Electric equipment
Electric equipment
...................................................
...................................................
V 12 V V 12 12 12 12 12
BP
Drive12/40 Drive658 962system700
system ............................................................
systemDrive 1084 542hydrost. 400
............................................................
............................................................ hydrost.
hydrost. hydrost. hydrost. hydrost.
Drum driven .............................................................
Drum driven Drum standard
.............................................................
driven ............................................................. standard
standard standard standard standard
Drums and Tyres Drums Drums
and Tyres
and Tyres
Technical Data
Number of pad feet ..................................................
Number of Number
pad feet of ..................................................
pad feet .................................................. 150
BOMAG
150
BOMAG
150
Area of one pad foot ................................................
Area of one Area pad of foot cm2
one ................................................ cm2
pad foot ................................................ cm2 137 137 137
Height of pad feet .....................................................
Height of Heightpad feet mm
of ..................................................... mm
pad feet ..................................................... mmBP10010/35 BP 12/40
100 100
Tyre size ..................................................................
Tyre sizeTyre ..................................................................
size ..................................................................
23.1-26 12PR 23.1-26 12PR
23.1-26
23.1-26 12PR12PR 23.1-26 12PR
23.1-26 12PR
Weights
Brakes BrakesBrakes
Service brake ...........................................................
Operating weightService CECE brake
Service ...........................................................
brake ...........................................................
........................................... hydrost.
kg hydrost.
65hydrost.
hydrost. hydrost. hydrost.
72
Parking brake ...........................................................
Parking brake Parking ...........................................................
brake ...........................................................
hydromec. hydromec.
hydromec.
hydromec. hydromec.hydromec.
Basic weight ............................................................. kg 64 71
Steering Steering
Steering
Dimensions
Steering system .......................................................
Steering systemSteering.......................................................
system .......................................................
oscil.artic. oscil.artic.
oscil.artic.
oscil.artic. oscil.artic.oscil.artic.
Steering method .......................................................
Steering methodSteering.......................................................
method .......................................................
hydrost. hydrost.
hydrost.
hydrost. hydrost. hydrost.
Working width .......................................................... mm 350 400
Steering
Steering / oscillating angle +/- ..................................
/Steering
oscillating / oscillating
angle +/- angle
..................................
grad +/- ..................................
35/12 grad grad35/12
35/1235/12 35/12 35/12
Driving Characteristics
Exciter system ExciterExciter systemsystem
Drive system ............................................................
Working speed, Drive max. systemDrive............................................................
Frequency ................................................................
Frequency Frequency Hz
................................................................
m/minHz hydrost.
system ............................................................
............................................... hydrost.
................................................................
30/34 Hz
25
30/34
hydrost.
hydrost.
30/3430/34
hydrost. hydrost.
25 30/34
30/34
Max. gradeability (dep. on soil con.)
Amplitude .................................................................
AmplitudeAmplitude
........................
mm 1,95/1,00 mm
.................................................................
%
.................................................................
30
mm1,95/1,00 1,95/1,00
1,70/0,90
30
1,70/0,901,70/0,90
Centrifugal force .......................................................
Centrifugal Centrifugal kN
force .......................................................
force .......................................................
240/158 kN kN 240/158 240/158
285/194 285/194 285/194
Drive
Centrifugal force .......................................................
Centrifugal Centrifugal t 24,5/16,1 t
force .......................................................
force ....................................................... t 24,5/16,124,5/16,1
29,1/19,8 29,1/19,829,1/19,8
Engine manufacturer ................................................ Honda Honda
Capacities Capacities Capacities
Type .........................................................................
Fuel ..........................................................................
Fuel ..........................................................................
Fuel ..........................................................................
l 220,0 l l GX 120220,0
220,0
220,0 GX 120
220,0 220,0
Emission
Technical modificationsstage .........................................................
reserved. Machines
Technical
may be
modifications
shown
Technical
withreserved.
modifications
options. Machines
reserved.
mayMachines
be shownmay
with be
options.
shown with options. StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
217
SINGLE DRUM ROLLERS Standard Equipment
BOMAG ECOMODE
Option
* RO
BW 211 DH-5, BW 211 PDH-5 - Tier 4 Double pump system for travel drive
No-Spin differential lock
- Slid
ROP
Rear axle with twin spring accumulator Rear
brakes Air co
Hydrostatic travel and vibration drive Radio
Hydrostatic articulated steering Pre s
Articulated joint lock Comf
Seat with arm rest and adj. for position and adjus
height Rotar
Sliding window Indica
Battery disconnect switch BOM
Single lever control for travel and vibration ECO
Warning, information and operation TERR
displays with LCD BOM
Loading mode BCM
Emergency STOP Spec
Working lights front / rear Padfo
Back-up alarm Envir
Noise insulation Meas
2 Scrapers third-
Warning horn Blade
Tractor tires (PDH) LED
Reve
audio
Standard Equipment Optional Equipment
BOMAG ECOMODE * ROPS/FOPS cabin with seat belts
* Sta
Double pump system for travel drive - Sliding window
(valid
No-Spin differential lock ROPS/FOPS with safety belt
218
TECHNICAL
Technical Data
DATA
Technical
Technical
Data Data BOMAG BOMAG
BOMAG
BOMAG BOMAG BOMAG
BW 211 DH-5 BW
BW211
211
BWDH-5
PDH-5
211 DH-5 BW 211BW
PDH-5
211 PDH-5
Weights Weights
Weights
Grossweight .............................................................
Grossweight Grossweight
.............................................................
.............................................................
kg 13.870 kg 13.90013.870
kg 13.870 13.900 13.900
Operating weight CECE w. Operating
ROPS-cabinOperating
weight .................
CECE
weight w.CECE
ROPS-cabin
kg w. ROPS-cabin................. kg
10.890................. 12.56010.890
kg 10.890 12.560 12.560
Axle load, drum CECE .............................................
Axle load,Axle drum load,
CECE drum .............................................
5.880 kg
CECEkg............................................. 7.420 5.880
kg 5.880 7.420 7.420
Axle load, wheels CECE Axle ..........................................
load,Axlewheelsload,CECEwheels ..........................................
CECE 5.010 kg
kg .......................................... 5.140 5.010
kg 5.010 5.140 5.140
Static linear load CECE ...........................................
Static linear Staticload linear
CECE load ...........................................
CECE kg/cm 27,6 kg/cm
........................................... kg/cm
27,6 27,6
Dimensions Dimensions
Dimensions
Working width ..........................................................
Working width Working ..........................................................
width ..........................................................
mm 2.130 mm mm2.130
2.130 2.130 2.130 2.130
Track radius, inner ...................................................
Track radius, Trackinnerradius,
...................................................
inner ...................................................
mm 3.680 mm mm3.680
3.680 3.680 3.680 3.680
Driving Characteristics
DrivingDriving
Characteristics
Characteristics
3 Speed .......................................................................
Speed .......................................................................
Speed .......................................................................
km/h 0- 12,0 km/h km/h
0- 12,0
0- 12,00- 12,0 0- 12,0 0- 12,0
0,136 Max. gradeability without/with
Max. vibr.
gradeability
Max.
..........................
gradeability
without/with without/with
vibr.
% ..........................
vibr. 60/58
..........................
% % 60/58
62/60 60/58 62/60 62/60
Earth work
Electric equipment ...................................................
Electric
H equipment
Electric
H1 H2 Lequipment
...................................................
...................................................
V L1 W 12 V V 12 12 12 12 12
w oil Drive system ............................................................
Drive system Drive............................................................
system ............................................................
hydrost. hydrost.
hydrost. hydrost. hydrost. hydrost.
BP
Drum10/35 658 962 driven700
driven .............................................................
Drum driven
Drum 1084 532standard 350
.............................................................
............................................................. standard
standard standard standard standard
Drums
BP and Tyres Drums
12/40 658Drums
and Tyres
962 and Tyres
700 1084 542 400
Number of pad feet ..................................................
Number of Number
pad feet of ..................................................
pad feet .................................................. 150 150 150
Area of one pad foot ................................................
Area of one Area pad of foot
one ................................................
pad foot ................................................
cm2 cm2 cm2 137 137 137
Height of pad feet .....................................................
Height of Heightpad feet of .....................................................
pad feet .....................................................
mm mm mm 100 100 100
Technical Data Tyre sizeTyre
Tyre size ..................................................................
..................................................................
size ..................................................................
23.1-26 12PR 23.1-26
BOMAG 23.1-26
23.1-26 12PR 12PR
12PR 23.1-26 12PR
BOMAG 23.1-26 12PR
Brakes BrakesBrakes
Service brake ...........................................................
Service brake Service ...........................................................
brake ...........................................................
hydrost. BP 10/35
hydrost.
hydrost.
hydrost. BP 12/40
hydrost. hydrost.
Parking brake ...........................................................
Parking brake Parking ...........................................................
brake ...........................................................
hydromec. hydromec.
hydromec.
hydromec. hydromec.hydromec.
Weights
Steering Steering Steering
Operating
Steering systemweight CECE
Steering ...........................................
.......................................................
system
Steering oscil.artic. kg
.......................................................
system ....................................................... 65 oscil.artic.
oscil.artic.
oscil.artic. 72 oscil.artic.
oscil.artic.
Basic weight
Steering method .............................................................
.......................................................
Steering methodSteering....................................................... kg
method .......................................................
hydrost. 64 hydrost.
hydrost. hydrost. 71 hydrost.
hydrost.
Steering / oscillating angle
Steering
+/- ..................................
/Steering
oscillating / oscillating
angle +/- angle
..................................
grad +/- ..................................
35/12 grad 35/12 35/12
grad35/12 35/12 35/12
Dimensions
Exciter system ExciterExciter systemsystem
Working
Drive system width ..........................................................
............................................................
Drive system Drive............................................................ mm
system ............................................................
hydrost. 350 hydrost.
hydrost.
hydrost. 400 hydrost.
hydrost.
Frequency ................................................................
Frequency Frequency
................................................................
................................................................
Hz 30/34 Hz 30/34 30/34
Hz 30/34 30/34 30/34
Driving Characteristics
Amplitude .................................................................
AmplitudeAmplitude
.................................................................
.................................................................
mm 1,90/1,00 mm mm1,90/1,00
1,70/0,90
1,90/1,00 1,70/0,901,70/0,90
Working speed,
Centrifugal force max. ...............................................
.......................................................
Centrifugal Centrifugal
force ....................................................... m/min
kN
force .......................................................
kN 240/162 kN 25 285/194
240/162 240/162 25 285/194
285/194
Centrifugal force .......................................................
Centrifugal Centrifugal
force .......................................................
force .......................................................
t 24,5/16,5 t t 24,5/16,5
29,1/19,8
24,5/16,5 29,1/19,829,1/19,8
Max. gradeability (dep. on soil con.) ........................ % 30 30
Capacities Capacities
Capacities
Drive
Fuel ..........................................................................
Fuel ..........................................................................
Fuel ..........................................................................
l 220,0 l l 220,0
220,0 220,0 220,0 220,0
Engine manufacturer
Technical modifications reserved. Machines
Technical
may be
................................................
modifications
shown
Technical
with reserved.
options.
modifications
Machines
reserved.
mayMachines
be shownmay
with be
options.
shown with options.
Honda Honda
Type ......................................................................... GX 120 GX 120
Emission stage ......................................................... StageV/CARB P.3 StageV/CARB P.3
Cooling ..................................................................... air air
Number of cylinders ................................................. 1 1
Performance SAE J 1349 ........................................ kW 2,6 2,6
Speed ....................................................................... min-1 3.600 3.600
Drive system ............................................................ mech. mech.
Fuel .......................................................................... Gasoline Gasoline
Fuel comsump. aver. during operation .................... l/h 0,9 0,9
Exciter system
Frequency ................................................................ Hz 90 90
Centrifugal force ....................................................... kN 10 12
Amplitude ................................................................. mm 1,33 1,42
Capacities
Fuel .......................................................................... l 2,0 2,0
Water ....................................................................... l 13,5 13,5
Technical modifications reserved. Machines may be shown with options.
219
SINGLE DRUM ROLLERS Standard Equipment
BOMAG ECOMODE
Optio
* RO
BW 212 D-5, BW 212 DH-5, BW 212 PD-5 - Tier 4 Warning, information and operation
displays with LCD
- Slid
ROP
Noise insulation Air c
Hydrostatic travel and vibration drive Rear
Hydrostatic articulated steering ECO
Articulated joint lock TER
Rear axle with twin spring accumulator BOM
brakes BOM
No-Spin differential lock Padf
Warning horn Radi
Single lever control for travel and vibration Indic
Seat with arm rest and adj. for position and BCM
height Spec
2 Scrapers Rota
Emergency STOP Pre s
Back-up alarm Envi
Working lights front / rear Com
Double pump system for travel drive adju
(DH/PDH) Mea
Tractor tires (PD) third
Loading mode LED
Sliding window Reve
Battery disconnect switch audi
* Sta
Standard Equipment Optional Equipment (valid
BOMAG ECOMODE * ROPS/FOPS cabin with seat belts
Warning, information and operation - Sliding window
Fields of application: displays with LCD ROPS/FOPS with safety belt
For medium to heavy duty compaction work. D-series models are suited to the
Noise insulation Air condition
220
TECHNICAL DATA
Technical Data Technical
Technical
Data
Technical
BOMAG
Data Data BOMAG
BOMAGBOMAG BOMAG
BOMAG BOMAGBOMAGBOMAG BOMAG BOMAGBOMAG
BW 212 D-5 BWDH-5
BW 212 212
BWD-5
212
BWD-5