Professional Documents
Culture Documents
Ucam Check List
Ucam Check List
Ucam Check List
Data Cleanup
Layer
1. Check the Skeleton view
2. Select all the dense line for making contour/filled copper.
3. Select all the tracing line for compensate copper etching 0.0125/2=0.0063mm each side.
4. Overlap with rout, score layer, and check clearance minimum 0.25 mm in routing & 0.50 mm in scoring.
Drill
1. Round off drill to nearest number…
2. Re-order drill from smaller to bigger.
3. Separate slot holes
4. Increase 0.05mm compensation every hole for single side job.
Mask
1. Check all Mask with copper & drill layer.
2. Check mask with copper layer 100µm clearance.
3. Create NPTH mask.
Silk
1. Make all line to 0.15mm.
2. Overlap with Drill layer and clip 200µm.
3. Silk on copper layer use 400µm clearance with mask pad.
4. Add date code and logo.
CP CREATION
Add : outline, Dimension, Model Name, layup, Cu area, Panel size, CP size, line width, minimum drill, etc.
Drill output:
Rout output:
Score output:
Plot:
First Copy the files in appropriate folder.
& Rename for better identification in future.