Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

For TPMS Service Tool T1000

TPMS Sensor Activation

Y
Highlight TPMS from the main menu and
select the vehicle model as need.

Select Vehicle

Y
USA
Select Trigger from the available menu.
Europe
Asia

2
Place the tool to the correct position to
Correct position
ensure sensor activation and decode.

Press Activate to test the TPMS. If test


3s... passes,TPMS data will be briefly
displayed for 3 seconds.

Battery Charging

The scanner has a built-in lithium-ion polymer rechargeable battery.


The unit charges on any of the following sources:

12-volt wall plug USB connection to personal computer

T1000XXXXX
For TPMS Service Tool T1000

TPMS Sensor Programming

Manual Create Before updating, please ensure you are connected to the Internet and you have created a Foxwell ID.

Y
Manual Create 012345678

Y
Clone by Activation

Automatic Create (�-�� sensors)

Highlight TPMS from the Select Programming-- Input the sensor ID in the Place a new Foxwell sensor Press Y to start the program-
main menu and select the Manual Create from the dialog box and press Y to near the TPMS tool (around ming when the tool detect the
vehicle model as need. available menu. continue. 0-20 cm). sensor.

Connect the scanner to the computer with the TF


Clone by Activation card reader or USB cable provided (TF card reader
update is suggested).

Y Y
Manual Create
Clone by Activation
Automatic Create (�-�� sensors)

Place the tool near the


Highlight TPMS from the Select Programming-- original sensor to be copied After trigger successfully, Place a new Foxwell Press Y to start the
main menu and select the Clone by Activation from and press Activate to press Y to continue. sensor near the TPMS tool programming when the tool
vehicle model as need. the available menu. continue. (around 0-20 cm). detect the sensor.

Automatic Create (1-16 sensors)

Y
Manual Create
Clone by Activation
Automatic Create (�-�� sensors)

s
Highlight TPMS from the Select Programming-- Place new Foxwell Press Y to start the
main menu and select the Automatic Create from sensors(1-16) near the programming when the tool
vehicle model as need. the available menu. TPMS tool (around 0-20 cm). detect the sensor.

You might also like