Professional Documents
Culture Documents
ANZSMM Section 14 Structural Steel
ANZSMM Section 14 Structural Steel
1. columns 1. boxed t 1. stating type and size M9. refer to the particular
detail
2. beams 2. compound 2. stating number and
individual measured
3. rafters 3.composite
lengths of sections
4. built-up
5. plain 1. angles
2. channels
4. purlins 3. universal beams D1. purlins and girts other
4. hollow sections than standard proprietary
5. girts
D2. nature of bracing such
6. bracing 1. stating nature of 5. similar items
as wall bracing between
bracing
columns, top or bottom
chord bracing between
trusses
7. temporary bracing M10. measure in D3. temporary bracing
accordance with the required for erection
appropriate rules when
detailed on the drawings
AUSTRALIAN AND NEW ZEALAND STANDARD METHOD OF MEASUREMENT OF BUILDING WORKS - 2018 EDITION 72
AUSTRALIAN AND NEW ZEALAND STANDARD METHOD OF MEASUREMENT OF BUILDING WORKS - 2018 EDITION 73
14 STRUCTURAL STEEL CONTINUED
MEASUREMENT &
CLASSIFICATION TABLE MEASUREMENT RULES DEFINITIONS
PRICES
8. attached connections item 1. stating number M11. measure immediately D4. attached connections
and fitted stiffeners (optional) where possible following the particular and fitted stiffeners
group or classification to includes all steel sections
9. loose connections 1. bearing plates built into no 2. stating size which they are attached and plates in stiffeners,
walls (e.g. columns, beams, cleats, brackets, gussets,
rafters, purlins) packers, coaming plates,
around holes, or openings
M12. measure separately
in steel sections, bearing
attached base plates, cap
or end plates, splice plates,
plates, butt plates and
connections and similar
similar items
attached items
D5. loose connections
includes all steel sections
and plates in loose
splice, cleats, brackets,
separators, distance
pieces, connections and
similar unattached items
fixed in the field
10. rigid frames 1. stating size and type t 1. stating the max M13. where patented or
dimensions of each frame, standard proprietary items,
the sizes of steel sections describe fully and give by
and thicknesses of steel number or in metres as
plates which comprise the appropriate
component parts of each
frame, and the number of
frames
2. standard fish plates no 2. including bolts and total M18. measure in pairs
mass of plates and bolts
3. specially designed fish
plates
17. standard proprietary 1. purlins m 1. stating nature and 1. including all drillings, M19. describe fully D6. excludes proprietary
purlins, girts and centres of supports laps, splices and fixings girts in metal framed
2. girts
accessories partitions (refer Partitions)
2. including bolts, nuts
and washers securing
the purlins or girts to the
supporting structure
AUSTRALIAN AND NEW ZEALAND STANDARD METHOD OF MEASUREMENT OF BUILDING WORKS - 2018 EDITION 74
AUSTRALIAN AND NEW ZEALAND STANDARD METHOD OF MEASUREMENT OF BUILDING WORKS - 2018 EDITION 75
14 STRUCTURAL STEEL CONTINUED
MEASUREMENT &
CLASSIFICATION TABLE MEASUREMENT RULES DEFINITIONS
PRICES
18. bolts 1. holding down no 1. stating length in 1. stating material, type, M20. measure length of D6. bolts other than black
increments of 100mm classification and including bolt as the total thickness bolts in connections
2. in connections
other components of the members to be
2. including casting or
bolted plus the diameter
building in
of the bolt plus 5mm or D7. attachments such as
if bevelled washers are steel plates or sections
required add an extra welded or fitted to bolts
3. attachments to bolts 5mm
21. ties 1. masonry M21. measure separately D8. ties shop welded to
according to description steelwork
2. similar items
23. wedges and grouting 1. grouting under base and m² 1. stating the thickness M22. measure net area
bearing plates or grillages and type
2. including all necessary
wedging and levelling
3. stating number of base
or bearing plates
24. surface treatments 1. shop priming t 1. stating the type of M23. measure as a
treatment required before separate item for each
priming classification. Include
an “item” under each
classification for surface
2. phosphating treatment to attached
3. hot dip galvanising plates and loose
connections
4. metal spraying
5. other special treatments
6. fire rating
25. field work 1. holes no 1. stating thickness of
member to be drilled and
diameter of bolt or rivet
2. cutting
3. notching
4. similar items
AUSTRALIAN AND NEW ZEALAND STANDARD METHOD OF MEASUREMENT OF BUILDING WORKS - 2018 EDITION 76