Professional Documents
Culture Documents
Tutorial For Designing Engine Case - GrabCAD Tutorials
Tutorial For Designing Engine Case - GrabCAD Tutorials
Shop
Partner Program
Print
Workbench
Community
Dashboard
Library
Challenges
Groups
Questions
Tutorials
Engineers
Blog
sk
1
My Profile New
My Models
My Likes
Settings
Log out
DHANASEKAR VINAYAGAMOORTHY
28 Dec, 2017 11:23 AM
This tutorial contains step by step procedure to create engine case using any software, this model especially
created using CREO parametric
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 1/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
Step: 1
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 2/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
2. Step 2:
Create sketch as shown below with given dimensions of 20 X 40 mm by selecting Right plane and then
click OK
3. Step 3:
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 3/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
4. Step 4:
Create a Datum plane as shown above by entering the translation distance of 3mm
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 4/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
Click Ok
5. Step 5:
Create the sketch as shown below in the newly created DTM1 plane and click ok
6. Step 6:
Extrude the Circle created in previous step to the depth value of 25.5mm
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 5/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
7. Step 7:
Select the top face of the rectangle and create sketch as shown below with specified dimensions and click
OK
8. Step 8:
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 6/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
9. Step 9:
Select the face shown below and create a sketch with specified dimensions and click OK
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 7/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
Create sketch below with specified dimension by selecting the face as selected below
Extrude the sketch created in previous step with depth value of 6mm
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 8/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
Create rounds as shown below by selecting the edges with radius of 2mm and click ok
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 9/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
Create another round on the edge selected before with radius of 1mm
Create the sketch as shown below by selecting the mid plane with specified dimensions
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 10/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
Note: create rectangle oriented at 70 degrees from the axis with 7 X 14 mm dimension (use
construction lines to make it simple)
Create revolve section as shown below with reference the axis and click ok
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 11/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
Create sketch as shown below with specified dimensions at the selected faces and extrude with
a depth value of 6mm
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 12/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
Create the sketches as shown below using references options and using dimension constrains and create
extrude up to selected edges as show in images
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 13/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
Create rounds as shown below at the selected faces with radius of 3mm
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 14/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
Create the sketch as shown below at the right side end face and create a revolve for 180 degrees
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 15/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
And using mirror command mirror the revolve command using the selected plane shown below
Create rounds as shown below with specified dimensions on the selected edges with r=2mm
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 16/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 17/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
Create the sketch on the same face which you created sketch in the previous step with specified
dimensions and create extrude with depth value of 1mm.
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 18/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 19/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
Create a datum plane DTM2 with translation distance of 2mm from the selected face
Create sketch in the previously created plane as shown below and extrude with a depth value of 1mm also
create the rounds at the corners with r=2mm as done before
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 20/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
Repeat the step one more time with dimensions given below and create the third fin as shown below
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 21/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
Again repeat the same step with new dimension for the fourth fin
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 22/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 23/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 24/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
Create an axis pattern as shown below with 4 instances for previously created extrude
Create another rounds at the selected section as shown below with r=0.5mm and repeat the same for all
other fins
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 25/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
Create the sketch as shown below with specified dimensions on the referenced face below and extrude
with a depth value of 12mm
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 26/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 27/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 28/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
Create sketch as shown below with specified dimensions and remove material using extrude option also
create pattern
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 29/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 30/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
Now create extrude cut using remove material with depth of 25mm
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 31/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 32/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
Create a Datum plane from the selected extrude feature with translation distance of 2mm
Create sketch as shown below use references options in setup group to make it simple
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 33/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
Now extrude with depth value of 1mm and mirror it on other side also pattern it as shown below
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 34/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 35/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
Now create sketch as shown below and remove material using extrude tool
Create another sketch as shown below with specified dimension and do extrude cut again using through
all option
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 36/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
Create another sketch and do extrude cut with depth value 0f 28mm again as shown below
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 37/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 38/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 39/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
Create sketch as shown below and create extrude feature with depth value of
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 40/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 41/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
Now create sketch at the selected face and create an extrude cut using remove material with
depth value of 15mm
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 42/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
Now create sketch as shown below and create extrude cut using remove material also mirror it on other
side
Added some contents to the model further and create an engine case shown below
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 43/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
Final Model
Like Liked
Details
Social
Copy link
https://grabcad.com/tutorials/
8288 Views
177 Likes
37 Comments
177 likes
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 44/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
Similar tutorials
In this tutorial...
Step 8
Step 9
Step 10
Step 11
Step 12
Step 13
Step 14
Step 15
Step 16
Step 17
Step 18
Step 19
Step 20
Step 21
Step 22
Step 23
Step 24
Step 25
Step 26
Step 27
Step 28
Step 29
Step 30
Step 31
Comments
Superb tutorial
thank you
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 46/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
Excellent
Thank you Murali R and Vishal singh solanki.... pls kindly look into my other tutorials and leave comment
to produce even more good tutorials which can used by others
Report
excellent.....
Thank you
Sure
fwd to ur id roshan
superb
Good tutorial, however hard to see dimensions and a step didnt make sent at the end. Also the last cut
extrude interfered with the previous cut extrude. Changing the dimension slightly works. I used SW btw.
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 48/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
Thank you Alan what to do i can't upload direct PDF here thats why dimensions may be not visible and i
dont think there are intersections.
If someone need this file request me for the PDF in private message
wonderfull tutorial
Anna super
Upcoming engineer Ku ithu romba useful
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 49/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
Very Good!
THANK YOU
Well done!
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 50/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
DHANASEKAR VINAYAGAMOORTHY sir iam doing mechanical engineering final year can you please
me these full dimensions PDF i think it's useful for my final year project if you don't mind can you please
send me that document to these mail mypostbox114@gmail.com wating for your reply sir
I have a better idea than this, I gave the link below <a href="https://alltricksusa.blogspot.com/search?
updated-max=2021-02-24T09:23:00-08:00&max-results=5"
target="_blank">https://alltricksusa.blogspot.com/search?updated-max=2021-02-24T09:23:00-
08:00&max-results=5</a></span></p><p> </p>
veryyyyyyyyyy goooooooooooood
My comment...
Comment
Community
Dashboard
Library
Challenges
Groups
Questions
Tutorials
Engineers
Workbench
Overview
Features
Compare
Print
Overview
Features
Shop
Overview
Features
Compare
Pricing
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 51/52
4/28/2021 Tutorial for Designing Engine case | GrabCAD Tutorials
Resources
Blog
Resource Center
Help Center
About us
Company
Jobs
info@grabcad.com Website Terms of Use Software Terms of Use Privacy policy Your Data on GrabCAD
Twitter Instagram Facebook LinkedIn
× There has been a recent increase in the number of accounts taking advantage of the COVID-19 crisis and
uploading incomplete models of N95 face-mask machines, soliciting our members for their email addresses and
charging money for the complete content. Not only will these pages be removed, but accounts participating in
this will be immediately blocked from GrabCAD without further notice. Community Values and Guidelines
https://grabcad.com/tutorials/tutorial-for-designing-engine-case 52/52