The MTS-HST is a hydraulic setting tool that can be used to set permanent packers in deviated wells. It is run into the well on tubing with a ball dropped to activate the tool and set the packer. Pressure is then applied to set and seal the packer. Once set, pressure or tension releases the tool from the packer allowing retrieval while leaving the packer in place. The tool is designed for deviated wells and allows tubing to fill as it is run into the hole.
The MTS-HST is a hydraulic setting tool that can be used to set permanent packers in deviated wells. It is run into the well on tubing with a ball dropped to activate the tool and set the packer. Pressure is then applied to set and seal the packer. Once set, pressure or tension releases the tool from the packer allowing retrieval while leaving the packer in place. The tool is designed for deviated wells and allows tubing to fill as it is run into the hole.
The MTS-HST is a hydraulic setting tool that can be used to set permanent packers in deviated wells. It is run into the well on tubing with a ball dropped to activate the tool and set the packer. Pressure is then applied to set and seal the packer. Once set, pressure or tension releases the tool from the packer allowing retrieval while leaving the packer in place. The tool is designed for deviated wells and allows tubing to fill as it is run into the hole.
The MTS-HST Can be set on tubing or drillpipe using a wireline
adapter kit and a hydraulic setting assembly. These setting assemblies are particularly useful for setting permanent packers in high-angle, deviated wells such as those drilled offshore. The hydraulic setting tool assembly and packer are run to setting depth on the tubing string and a ball is dropped to the ball seat in the setting tool. Sufficient tubing pressure is then applied to set and pack off the packer. The pressure or combined pressure and tubing tension, parts the release stud in the adapter kit and frees the setting assembly from the packer for retrieval. The HST has a bottom connection that accepts common wireline-setting tool adapter kits.
FEATURES
➢ Heavy-duty construction for pushing tools into deviated or
horizontal wells. ➢ EUE tubing connections standard ➢ The Fury circulation ports are located below the ball seat. These ports will allow the tubing to fill going in the hole or for circulating a maximum rate of ¼ BPM while going in the hole. ➢ Large internal by-pass ➢ Tubing fills automatically as HST is run in the hole ➢ Use existing wireline adapter kit ➢ Eliminates need to deploy wireline unit ➢ Large-casing packers ➢ Permanent Completions