Professional Documents
Culture Documents
Ansi/Nace Mr0175/Iso 15156-2:2015
Ansi/Nace Mr0175/Iso 15156-2:2015
,WHP1R
ANSI/NACE MR0175/ISO
15156-2:2015
5HIHUHQFHQXPEHU
$16,1$&(05,62
$16,1$&(,62
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only. No further reproduction or networking is permitted. Distributed by Thomson Reuters (Scientific) LLC, www.techstreet.com.
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only.
No further reproduction or networking is permitted.
&23<5,*+73527(&7(''2&80(17
7KHVHPDWHULDOVDUHVXEMHFWWRFRS\ULJKWFODLPVRI,62DQG1$&(1RSDUWRIWKLVSXEOLFDWLRQPD\EHUHSURGXFHGLQDQ\IRUP
LQFOXGLQJ DQ HOHFWURQLF UHWULHYDO V\VWHP ZLWKRXW WKH SULRU ZULWWHQ SHUPLVVLRQ RI 1$&( $OO UHTXHVWV SHUWDLQLQJ WR WKH
$16,1$&(05,62VWDQGDUGVKRXOGEHVXEPLWWHGWR1$&($OOULJKWVUHVHUYHG
1$&(,QWHUQDWLRQDO
3DUN7HQ3ODFH
+RXVWRQ7;
7HO
)D[
:HEZZZQDFHRUJ
3ULQWHGLQWKH86$E\1$&(,QWHUQDWLRQDO
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only. No further reproduction or networking is permitted. Distributed by Thomson Reuters (Scientific) LLC, www.techstreet.com.
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only.
ANSI/NACE MR0175/ISO 15156-2:2015(E)
&RQWHQWV 3DJH
Foreword .......................................................................................................................................................................... v
Introduction ..................................................................................................................................................................vii
1 Scope .................................................................................................................................................................... 1
2 Normative references .................................................................................................................................... 2
3 Terms and definitions ................................................................................................................................... 3
4 Symbols and abbreviated terms ................................................................................................................ 6
© NACE/ISO 2015 v
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only.
ANSI/NACE MR0175/ISO 15156-2:2015(E)
Foreword
ȋ Ȍ
ȋ ȌǤ
Ǥ
Ǥ
ǡ Ǧǡ ǡ Ǥ
ȋȌ
Ǥ
Ȁ
ǡ ͳǤ
Ǥ
Ȁ
ǡʹȋǤǤȀ
ȌǤ
Ǥ
ǡ
̵
ȋȌǣ Ǧ
Ȅ
Dz
dzDz
dzǢ
Ȅ
ǤʹǤͳǤͳ ǤʹǤͳǤͳ
Ǣ
Ȅ
ǤʹǤͳǤͶ
Ǥ
Ȁ ͲͳͷȀͳͷͳͷ
ǡ Petroleum and
natural gas industries — Materials for use in H2S-containing environments in oil and gas production
Ȅ Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons
Introduction
ǡ
ʹǦ
ǡͲͳͷǡ
ͳͻͷ
ǡ
Ǥ
Ͳͳͷ ʹ
ȋȌ
Ǥ
Ǧʹ
Ǥ
ǡ Ͳͳͷ
Ǧ ǡ
ǡ ǡ ʹ
Ǥ
ǡ
ͳ ͳͻͻͷ
ͳͳͻͻǤ
Ǥ
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only. No further reproduction or networking is permitted. Distributed by Thomson Reuters (Scientific) LLC, www.techstreet.com.
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only.
ANSI/NACE MR0175/ISO 15156-2:2015(E)
WARNING — Carbon and low-alloy steels and cast irons selected using this part of ANSI/NACE
MR0175/ISO 15156 are resistant to cracking in defined ʹ-containing environments in oil and gas
production but not necessarily immune to cracking under all service conditions. It is the equipment
user's responsibility to select the carbon and low-alloy steels and cast irons suitable for the intended
service.
1 Scope
© NACE/ISO 2015 1
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only.
ANSI/NACE MR0175/ISO 15156-2:2015(E)
2 Normative references
ǡ ǡ
Ǥ
ǡ
Ǥ
ǡ
ȋ
ȌǤ
ͷͲǦͳǡMetallic materials — Brinell hardness test — Part 1: Test method
ͳͲͶʹ͵ǡ Petroleum and natural gas industries — Drilling and production equipment — Wellhead and
Christmas tree equipment
2 © NACE/ISO 2015
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only.
ANSI/NACE MR0175/ISO 15156-2:2015(E)
Ȁ ͲͳͷȀͳͷͳͷǦͳǣʹͲͳͷǡ Petroleum and natural gas industries — Materials for use in ʹ-
containing environments in oil and gas production — Part 1: General principles for selection of cracking-
resistant materials
Ȁ ͲͳͷȀͳͷͳͷǦ͵ǣʹͲͳͷǡ Petroleum and natural gas industries — Materials for use in ʹ-
containing environments in oil and gas production — Part 3: Cracking-resistant CRAs (corrosion-resistant
alloys) and other alloys
Ͳͳǡͳ
ʹ
ͲʹͺͶǡ
Ǧ
ͳǡ
H2SǦ
ʹ
ǦʹͶ͵Ͳǡ͵ǡ
3.2
bubble-point pressure
pB
ͳǣǤʹǤ
3.3
burnish
ǡ
3.4
casting
ͳǡͳͷͺ͵ͷ
ǡǡͲͺͶǦͷͳͶͷǡǤ
ʹ ǡ ǡ ͳ
ǡ ͳ ͷǡ
ȏͲǦͻͲͳͳǦͻͷǦʹȐǤ
͵
ȋȌǡͶͲͲǡǡͳͷͲͻǦͲͲͲͳǤ
© NACE/ISO 2015 3
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only.
ANSI/NACE MR0175/ISO 15156-2:2015(E)
3.5
cast iron
Ǧ
ʹΨͶΨ
3.5.1
grey cast iron
3.5.2
white cast iron
3.5.3
malleable iron
ȋ
Ȍ
3.5.4
3.6
cementite
ȋ ͵Ȍ
3.7
cold working
cold deforming
cold forging
cold forming
3.8
fitness-for-purpose
3.9
free-machining steel
ǡ ǡ
3.10
lower critical temperature
3.11
nitriding
Ǧ
ȋ
Ȍ
ǡǡǤ
4 © NACE/ISO 2015
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only.
ANSI/NACE MR0175/ISO 15156-2:2015(E)
3.12
normalizing
ȋȌǡ
ȋ
Ȍ
3.13
plastically deformed
ǡǤǤ
3.14
pressure-containing part
ǡǤ
3.15
3.16
Rockwell C hardness
HRC
ǡ
ͷͲͺǡ
ͳͶͳ
3.17
shot-peening
3.18
stress relief
ǡ
ǡ
3.19
tempering
ǡ
ǡ
ǡǡ
3.20
tensile strength
ultimate strength
Ǧ
ͳǣͺͻʹǦͳǤ
3.21
test batch
© NACE/ISO 2015 5
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only.
ANSI/NACE MR0175/ISO 15156-2:2015(E)
3.22
tubular component
ȋȌ ǡ Ȁ
3.23
Vickers hardness
HV
ǡ
ͷͲǦͳǡ
3.24
weldment
ǡ
ǡǦ
ȋȌǡ
3.26
wrought
ȋ
Ȍȋǡǡǡ
ǤȌǡ
ǦǦ
6 © NACE/ISO 2015
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only.
ANSI/NACE MR0175/ISO 15156-2:2015(E)
Ǧ
Ǧ
T
ȋǦǡMetals and
alloys in the Unified Numbering SystemȌ
ȋȌ
5 Purchasing information
5.1
Ǧ
ǡ
Ȁ ͲͳͷȀͳͷͳͷǦͳ Ȁ
ͲͳͷȀͳͷͳͷǤ
Ȅ ȀȋȌǢ
Ȅ ȋȌǢ
Ȅ ȋȌǢ
Ȅ ȋͺȌǤ
5.3 Ȁ
Ǧ
Ȁ
ǡ
ǡ
Ǥ
Ȅ ȋǤͳǤʹȌǡ
Ȅ Ǧ ǡ
Ȅ Ǥ
5.4
ʹ
ǦǤ
5.5
Ǥ
Ǥ
6 Factors affecting the behaviour of carbon and low alloy steels in H2S-containing
environments
Ǧ ʹǦ
ǡ
ǣ
© NACE/ISO 2015 7
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only.
ANSI/NACE MR0175/ISO 15156-2:2015(E)
Ȍ
ǡ
ǡ
ǡǡ
ǡ
ǡ Ǧ
ǡ
ǡ
ǡ
Ǣ
Ȍ ʹ
Ǣ
Ȍ
Ǣ
Ȍ
ȋȌǢ
Ȍ
Ǣ
Ȍ Ǧ
Ǣ
Ȍ Ǣ
Ȍ ȋȌǢ
Ȍ Ǥ
7.2 Option 2 — Selection of steels for specific sour-service applications or for ranges of
sour service
7.2.1 Sulfide stress cracking
7.2.1.1 General
ʹ
ȋȌ
Ǧ
Ǥ
ǡ
ʹ
ǤʹȋͳȌǤ
ʹ
in situ ʹ
ǢȀͲͳͷȀͳͷͳͷǦͳǤ
8 © NACE/ISO 2015
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only. No further reproduction or networking is permitted. Distributed by Thomson Reuters (Scientific) LLC, www.techstreet.com.
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only.
ANSI/NACE MR0175/ISO 15156-2:2015(E)
ǡ
Ǥ
ǡ
ǡǡ
̵
Ǥ
Ȅ
Ǥ
Ȅ ̵ ǢǤ
Ȅ Ǥ
ͳǡͳ
7.3.1 General
Ǧ
Ǥ
Ǥ
7.3.2 Parent metals
ǡ
Ǥ
ȀͲͳͷȀͳͷͳͷ
Ȁ
ͲͳͷȀͳͷͳͷʹ
Ǥ
ȀͲͳͷȀͳͷͳͷ
Ǥ
10 © NACE/ISO 2015
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only.
ANSI/NACE MR0175/ISO 15156-2:2015(E)
Ȁ
ͲͳͷȀͳͷͳͷǤ
ǡ
ͳ
ǡ
ȋȌ
ȋȌ
ȋȌ ȋȌǡ
ͳͶͲ ͳͺʹͷǤ
Ǥ
Ǥ
7.3.3 Welds
7.3.3.1 General
Ǧ
ǡǤ
Ǥ
ͳͲ
ͷ
ͷͲǦͳǡ
ͷͲͺǦͳ
ͳͷ
Ǥ
ǡ͵ͺͶͷͲǦͳͳͺ
ͷͲͺǦͳǤ
Ǥ
ͳͷ
Ǧ
Ǥ͵Ǥ͵ǤͶǤ
7.3.3.3 Hardness surveys for welding procedure qualification
© NACE/ISO 2015 11
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only. No further reproduction or networking is permitted. Distributed by Thomson Reuters (Scientific) LLC, www.techstreet.com.
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only.
ANSI/NACE MR0175/ISO 15156-2:2015(E)
© NACE/ISO 2015 13
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only. No further reproduction or networking is permitted. Distributed by Thomson Reuters (Scientific) LLC, www.techstreet.com.
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only. No further reproduction or networking is permitted. Distributed by Thomson Reuters (Scientific) LLC, www.techstreet.com.
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only.
ANSI/NACE MR0175/ISO 15156-2:2015(E)
Ȁ
Ǥ
ǡ
Ǧ
ͲǤͲͲ͵Ψ
ͲǤͲͳΨ
ǡ
Ǥ
ͲǤͲʹͷΨ
ǡ
ǡ
Ǥ
ͳ Ȁ
ǦǤ ǡ
Ȁ
Ǥ
ǡ
Ȁ
Ǥ
ʹ
ǡ ǡ ǡ
ǡ
Ǥ
16 © NACE/ISO 2015
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only.
ANSI/NACE MR0175/ISO 15156-2:2015(E)
Annex A
ȋȌ
A.1General
Ǧ
Ǥ
ǤʹǤͶǤ
ǡ ǡ
ȋǤʹǤʹȀͺȌǤ
Ȁ ͲͳͷȀͳͷͳͷǡ
ʹȋǤ͵ȌͳȋǤͶȌǤǡǤ͵ǤͶ
Ǥ
A.2SSC-resistant carbon and low-alloy steels and the use of cast irons
A.2.1 General requirements for carbon and low alloy steels
A.2.1.1 General
Ǧ ǤʹǤͳǤʹǤʹǤͳǤͻǤ
ʹ
Ǥʹ
ʹȋǤʹȌǤ
Ǧ
ʹʹ
ͳΨ
ǡǦ
Ǧ
ǣ
Ȍ Ǧȋ
ȌǢ
Ȍ Ǣ
Ȍ Ǣ
© NACE/ISO 2015 17
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only.
ANSI/NACE MR0175/ISO 15156-2:2015(E)
Ȍ Ǣ
Ȍ ǡǡ ǡǢ
Ȍ ǡ ǡǤ
ǤʹǤͳǤʹǡ
Ǥ
Ȍ
ͳͲͷ
ͳͺǤ
Ȍ ʹ͵Ͷǡ
ͳͻǤ
A.2.1.4 Welding
18 © NACE/ISO 2015
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only.
ANSI/NACE MR0175/ISO 15156-2:2015(E)
Table A.1 — Maximum acceptable hardness values for carbon steel, carbon-manganese steel and
low-alloy steel welds
ȋ
Ȍǡ
ǡ
Ǥ
Ȍ Ǧ
ǤʹǤͳǤʹǡ
ǡǤʹǤͳǤͶǤ
ȀͲͳͷȀͳͷͳͷǦ͵ǣʹͲͳͷǡǤͳ͵ǤͳǤȀ
Ȁ ͲͳͷȀͳͷͳͷǦ͵
ȀͲͳͷȀͳͷͳͷǡ
Ǥ
ǡ
ǡ
Ǥ
ǤʹǤͳǤʹǤ
ǡ
ͲǤͳͷ ȋͲǤͲͲȌǡ
Ǥ
A.2.1.6 Cold deformation and thermal stress relief
ǦǦ
ǡ
ͷΨǤ
Ǥ
ǦͷͻͷιȋͳͳͲͲι ȌǤʹʹ
ʹ͵Ͷ ǡ
ͳͻǤ
© NACE/ISO 2015 19
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only.
ANSI/NACE MR0175/ISO 15156-2:2015(E)
Ǥ
Ǧ
ǢǤʹǤʹǤ͵ǤͶǤ
Ǧ ͷ͵
ǡ ͳͲ
ǡ ͷ
ǦͶʹǡ ͵ͳͺ͵
ʹͻͲǡ ǦǦ
ǡ
ͳͷΨǡ
ͳͻͲǤ
Ǥ
A.2.1.7 Threading
Ǧ
Ǥ
ȋȌ
ǤʹǤͳǤʹǤ
ǡ
ǡ
ȋ
ǡ ǡ ǡ
ǡǡ
ǤȌǤ
Ǧ
ȀͲͳͷȀͳͷͳͷ
ʹǤͲȋͲǤͲͺͲȌ
ͳͲǤ
ǦʹͶ͵ͲǤ
A.2.1.9 Identification stamping
ǦȋǦǡǦǡǦȌ
Ǥ
Ǧ
Ǧǡ
A.2.2.1 General
ǡǤʹǤͳ
Ǥ
A.2.2.2 Pipe, plate, and fittings
ǤʹǤͳǤʹǤ
Ǧͳǡ
ͳʹǡ
Ǥ
Ǧ
ʹȏǤǤSʹͲǤ͵
ȋͲǤͲͷȌȐ
ȀǤ
20 © NACE/ISO 2015
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only.
ANSI/NACE MR0175/ISO 15156-2:2015(E)
Table A.2 — Examples of tubular products that can comply with A.2.1
ǤʹǤͳǤ
A.2.2.3 Downhole casing, tubing, and tubular components
A.2.2.3.1
A.2.2.3.2
Ǧ Ǧ ȋ
ͶͳͲǡ
Ͷͳǡ
Ȍǡ
ǡ
͵ͲͻͲȋͳͲͲȌǡʹͲȋͳͲͷȌǡ
Ͳ ȋͳͳͲȌǤ
ͳͲ͵ ȋͳͷȌ
Ǥ
ǤͳǤ
A.2.2.3.3
Ǧ Ǧ ȋ
ͶͳͲǡ
Ͷͳ
Ȍǡ
ǡ
ʹǤ
Ǥͳ
Ǥ
Ǧʹʹ
Ǧǡ
ǦͷͻͷιȋͳͳͲͲι ȌǤ
© NACE/ISO 2015 21
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only.
ANSI/NACE MR0175/ISO 15156-2:2015(E)
Table A.3 — Environmental conditions for which grades of casing and tubing are acceptable
For all temperatures For η 65 °C (150 °F) For η 80 °C (175 °F) For η 107 °C (225 °F)
ͳͳͻͲǣ ͳͳͻͲǣ ͳͳͻͲǣ ͳͳͻͲǣ
ͶͲ ͺͲ ͺͲ ͳʹͷ
ͷͷ ͻͷ ͳͳͲ
ͷͷ
ͷ
ͺͲͳ
ͻͲͳ
ͻͷͳ
Ƭ Ƭ
ǤʹǤʹǤ͵Ǥ͵ ͲȋͳͳͲȌ ͻͷȋͳͶͲȌ
ǡǡǡ
ǡ
Bolts Nuts
ͳͻ͵
ͳͻͶʹǡ
͵ʹͲ
A.2.3.1 General
ǤʹǤͳǡ
Ǥ
A.2.3.2 Drilling blowout preventers
Ǧ Ǧ ȋȌ
Ǥ
Ǥ
A.2.3.2.2 Shear rams
22 © NACE/ISO 2015
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only.
ANSI/NACE MR0175/ISO 15156-2:2015(E)
Ǧ Ǧ ȋ
ͶͳͲǡ Ͷǡ
Ȍ
ʹǤ
ʹʹǡ
Ǥǡǡ
Ǥ
A.2.3.2.3 Drilling, well construction and well-servicing equipment exposed only to drilling fluids of
controlled composition
ǡ
Ȁ
ͲͳͷȀͳͷͳͷȋȌǤ
ǡ
Ǧ
Ǥ
ǡ Ǧ
Ǥ
Ǧ
ǦǦ
ǣ
Ȍ
ͳͲʹǢ
Ȍ Ǣ
Ͷ͵ʹͲͲ ȋ Ͷ͵ʹͲȌ
Ͷ͵ʹͲͲ
ͲǤʹͺΨ
ͲǤ͵͵Ψ
ʹͲȋͻͲȌǦ
Ǧ
Ǥ
Ȍ
Ǥ
ǡǦ
Ǥ
ǤʹǤͶ
Ǥ
A.2.4 Requirements for the use of cast irons
A.2.4.1 General
ǡ
Ǧ
Ǥ
Ǥ
͵ͻͷ
Ǥ
A.2.4.2 Packers and subsurface equipment
Ǥ
© NACE/ISO 2015 23
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only.
ANSI/NACE MR0175/ISO 15156-2:2015(E)
Table A.5 — Cast irons acceptable for packers and other subsurface equipment
ȋʹͺǡ͵ͷͶͲȌ
ȋȌ
ȋ͵ͻͷȌ
ǡǡǤ
ǡ
Ǧ Ǧ ȋ
ͶͳͲǡ Ͷͳ
Ȍ
Ǥ
ǡ
ͺͻ ȋͳ͵ͲȌ ȏ
Ͳ ȋͳͳͲȌȐ ͵ͲǤ
Ǥ
A.4.3 Pipeline steels
Ǥ
ǡ
ͷͷͲ ȋͺͲȌ
Ǥ
ǡ
͵ͲͲǤ
Ǥ
24 © NACE/ISO 2015
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only.
ANSI/NACE MR0175/ISO 15156-2:2015(E)
Annex B
ȋȌ
B.1Requirements
Ǧʹ
Ǥ
Ǥ
Ȍ
ǣ
Ȅ ǢǤʹǤͳǤͳǢ
Ȅ ͳʹ ͳ Ǥ͵ǤͳǢ
Ȅ ͳ Ǥ͵Ǥ
Ǥ
Ǧ
Ǥʹ
ȋǤʹǤͳȌǤ
Ȍ
ǤͶ
Ǥ
Ȅ ȋǤͷǤ͵ȌǢ
Ȅ ȋǤͷǤ͵ȌǤ
ǡ
ȋȌǤ
Ǥ
ǤͳǤ
© NACE/ISO 2015 25
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only. No further reproduction or networking is permitted. Distributed by Thomson Reuters (Scientific) LLC, www.techstreet.com.
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only.
ANSI/NACE MR0175/ISO 15156-2:2015(E)
ǡ
ǡ
ȋȌȋǡǡǡȀȌǤ
Ǥ
Ǥ
Ǥ
ǦǤ
ǡ
Ǥ
ǡ
Ǥ
Ǥ
ǡ
Ǥ
ǯ
Ǥ
ʹ
Ǥ
ʹ
ǡ
Ǥ
Ǥ
ǦʹǦ
Ǥ
Ǥ
Ǥ
Ǥ
ǡ
Ȍ
ǤʹǤʹǡ
Ǣ
Ȍ
ȀǤ
Ǥ
Ǥ
B.2.4 Use of laboratory testing as a basis for proposing additions and changes to Annex A
Ȁ
ͲͳͷȀͳͷͳͷǦͳǤ
Ǥ
© NACE/ISO 2015 27
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only.
ANSI/NACE MR0175/ISO 15156-2:2015(E)
Ȅ
Ǧ
ǤʹǤͳǤ
Ȅ
Ǧ Ǥʹ
Ǥͳ
ͳȋǤʹȌǤ
Ȅ
ǦǤ͵ǤͶ
Ǥͳ
ͳȋǤʹȌǤ
Ȅ
Ȁ
ͲͳͷȀͳͷͳͷǦͳǤ
Ȅ
Ǥ͵Ǥ
Ȅ
Ȁ
Ȁ ͲͳͷȀͳͷͳͷǡ
28 © NACE/ISO 2015
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only.
ANSI/NACE MR0175/ISO 15156-2:2015(E)
ͷΨ
Ǥ
ηͻͲΨ
Ͳͳ
ΪͲǤͶΨ
ǡ
Dz
dz
͵ǡ
ͳ
ʹ
ͳ
ǯ
ͲͳǤ
ηͺͲΨ Ͳͳ Ȅ
Ͳͳ
© NACE/ISO 2015 29
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only.
ANSI/NACE MR0175/ISO 15156-2:2015(E)
Ǥ
ȀǤ
ǡǤ͵Ǥ͵Ǥ
Ȁ
ͲͳͷȀͳͷͳͷǦͳǤ
ǤǤ
Ǥ
Ȍ
ͳͷͲι ʹ Ǥ
Ǥ ͺͲΨ
ǡǡ
Ǥ
Ȍ
Ǥ
Ǧ
ȋȌǤ
Ǧ
ͲǤͷ
Ǥ
30 © NACE/ISO 2015
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only.
ANSI/NACE MR0175/ISO 15156-2:2015(E)
Ǧ
Ǧ
ʹǤ
ǡ
ǡ
ǡ
Ǥ
Ǧ
ȋȌǤ Ǧ
ͲǤͷ
Ǥ
ǡ
ͷΨ
Ǥǡ
ͳͷͲι
ʹǤ
ͳ
ǡ
ǡ
ȀǤ
© NACE/ISO 2015 31
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only.
ANSI/NACE MR0175/ISO 15156-2:2015(E)
32 © NACE/ISO 2015
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only.
ANSI/NACE MR0175/ISO 15156-2:2015(E)
Annex C
ȋȌ
C.1 Calculation of partial pressure of H2S for systems with a gas phase
ʹǡSʹǡ
ȋ
Ȍǡ
ʹ ȋǤͳȌǣ
x
ʹ
p p ȋǤͳȌ
ʹ6 ͳͲͲ
C.2 Calculations of effective H2S partial pressure for gas-free liquid systems
ȋ
Ȍǡ
Ǧ ǡ Ǧ
Ǥ
x
ʹ
p p ȋǤʹȌ
ʹ6 ͳͲͲ
p Ǧǡ
ȋ
ȌǢ
x ʹ
ʹǡ
Ǥ
Ȍ ʹǤ
ͳ ȋ ǤͳȌ
ʹȋǤʹȌǤ
© NACE/ISO 2015 33
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only. No further reproduction or networking is permitted. Distributed by Thomson Reuters (Scientific) LLC, www.techstreet.com.
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only. No further reproduction or networking is permitted. Distributed by Thomson Reuters (Scientific) LLC, www.techstreet.com.
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only. No further reproduction or networking is permitted. Distributed by Thomson Reuters (Scientific) LLC, www.techstreet.com.
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only. No further reproduction or networking is permitted. Distributed by Thomson Reuters (Scientific) LLC, www.techstreet.com.
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only. No further reproduction or networking is permitted. Distributed by Thomson Reuters (Scientific) LLC, www.techstreet.com.
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only. No further reproduction or networking is permitted. Distributed by Thomson Reuters (Scientific) LLC, www.techstreet.com.
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only.
ANSI/NACE MR0175/ISO 15156-2:2015(E)
Annex E
ȋȌ
ʹǤͳǤʹ
Ǥ
Ȁ
Ǥ
Ȁ ͲͳͷȀͳͷͳͷǦʹǡ
ͷǡ
ǡǦ
ͲͳͷǤ
Purchaser's reference
40 © NACE/ISO 2015
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only.
ANSI/NACE MR0175/ISO 15156-2:2015(E)
Table E.2 — Additional information for SSC testing and other special cases
Purchaser's reference
Sour service
designation
Reference
ANSI/NACE
(sub)clause in
Materials requirements for this MR0175/
ANSI/NACE Remarks
purchase order ISO 15156-x,
MR0175/
(multiple codes
ISO 15156-2
can be
required)
Resistance to SSC
Ǥʹ Ȅ Ȅ
following option 2
Ȍ
Ȁ ǤʹǤͳǤͶǡ ͳǡ
ǫ Ǥͳ ʹ͵
Ȍ
Ȁ
Ϋ Ȅ Ȅ Ȁ Ȅ
ȋͲȌ Ȅ Ȅ Ȅ
Ȅ Ȅ Ȅ Ȅ
ʹ
Ȁ ǤʹǤʹǤͶ
Ȁ
© NACE/ISO 2015 41
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only.
ANSI/NACE MR0175/ISO 15156-2:2015(E)
Bibliography
ȏͳȐ ͵ͳͺ͵ǡPetroleum and natural gas industries — Steel pipe for pipeline transportation systems
ȏʹȐ ͳͳͻͲǡPetroleum and natural gas industries — Steel pipes for use as casing or tubing for wells
ȏͻȐ ͳͲͷȀͳͲͷǡStandard Specification for Carbon Steel Forgings for Piping Applications
ȏͳͲȐ ͳͲǡStandard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
ȏͳͳȐ ͳͻ͵Ȁͳͻ͵ǡ Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for
High-Temperature Service or High Pressure Service and Other Special Purpose Applications
ȏͳʹȐ ͳͻͶȀͳͻͶǡStandard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure
or High Temperature Service, or Both
ȏͳͶȐ ʹ͵ͶȀʹ͵ͶǡStandard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel
For Moderate and High Temperature Service
ȏͳͷȐ ʹͺȀʹͺǡ Standard Specification for Gray Iron Castings for Pressure-Containing Parts for
Temperatures up to 650 °F (350 °C)
ȏͳȐ ͵ʹͲȀ͵ʹͲǡ Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for
Low-Temperature Service
ȏͳȐ ͵͵͵Ȁ͵͵͵ǡ Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature
Service and Other Applications with Required Notch Toughness
ȏͳͺȐ ͵ͺͳǡ Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure
Transmission Systems
ȏͳͻȐ ͵ͻͷȀ͵ͻͷǡ Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for
Use At Elevated Temperatures
Ͷ
ǡͳʹʹͲǡǡʹͲͲͲͷǦͶͲͲǡǤ
ͷǡǡǡͳͲͲͳǦͷͻͻͲǡǤ
42 © NACE/ISO 2015
Copyrighted material licensed to Ron Hartzler on 2017-01-13 for licensee's use only.
ANSI/NACE MR0175/ISO 15156-2:2015(E)
ȏʹͲȐ ͷʹͶǡ Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower
Temperatures
ȏʹʹȐ ͷͳȀͷͳǡ Standard Specification for Austenitic Ductile Iron Castings for Pressure-
Containing Parts Suitable for Low-Temperature Service
ȏʹͶȐ ͳͶͲǡ Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness,
Vickers Hardness, Rockwell Hardness, Rockwell Superficial Hardness, Knoop Hardness, and Scleroscope
Hardness
ȏʹȐ ǦͻͷǦ͵ͷǡ A test method to determine the susceptibility to cracking of linepipe steels in sour
ȏʹȐ ȀʹͲͲͲǡͳʹͺǡA new device for side bend testing on pipe seam weldsͺ
ȏʹͺȐ ͲͳǡMetallic materials for sucker-rod pumps for corrosive oilfield environments
ȏʹͻȐ ͲͳͷǡSulfide stress cracking resistant metallic materials for oilfield equipment
ǡǡͳͻͻͻǡǡͳͲʹǡȏͲǦͳǦͳʹͳǦ͵ȐǤ
ͺ ǡͳͷͺ͵ͷ
ǡǡͲͺͶǦͷͳͶͷǡǤ
© NACE/ISO 2015 43