Professional Documents
Culture Documents
2015 BMW 6 Series Gran Coupe - Quick Reference Guide
2015 BMW 6 Series Gran Coupe - Quick Reference Guide
2015 BMW 6 Series Gran Coupe - Quick Reference Guide
The Ultimate
Driving Machine®
38 Entertainment
Panic mode
Tip Press the button on the remote control for at least
Depending on the equipment and the coun- 3 seconds to set off the alarm system.
try variant, it is possible to set whether the Switch off by pressing any button.
doors are also unlocked when the trunk lid is
opened.
Unlocking
Completely grasp the handle of a vehicle door.
Opening the trunk lid from the outside Closing the trunk lid from the outside Closing the trunk lid from the outside
Press on the top half of the BMW emblem. Recessed grips in the interior trim of the trunk lid Press the button on the inside of the trunk lid.
make it easier to pull down the lid. When the driver's door is closed, the vehicle is
completely locked.
Shoulder support
Backrest width
Thigh support
Mirror adjustment
Selecting a mirror
To change over to the other mirror:
Slide the mirror changeover switch.
Locking the rear doors LATCH child restraint fixing system Mounts for the lower LATCH anchors
Move the safety lever in the rear doors to the To install and use the LATCH child restraint fixing The lower anchors may be used to attach the
downward position. The respective door can only systems, observe the operating and safety infor- CRS to the vehicle seat up to a combined child
be opened from the outside. mation from the system manufacturer; otherwise, and CRS weight of 65 lb/30 kg when the child is
the level of protection may be reduced. restrained by the internal harnesses. Before install-
ing the LATCH child restraint system, pull the belt
away from the child seat fastening area.
Make sure that the lower LATCH anchors are prop-
erly engaged and that the child restraint system is
resting snugly against the backrest.
Firmly press the installation guide into the gap be-
tween the seat upholstery and backrest. Continue
to press until the two funnel-shaped guides snap
into place in the LATCH support brackets. The in-
stallation guide can be removed simply by pulling.
Entertainment source
Voice activation
Telephone
Signaling briefly
Press to the resistance point and hold there for as
long as you want the turn signal to flash.
High beams
Computer
High-beam Assistant
Headlamp flasher
Rain sensor
Brief wipe
Press once.
The concept
The instrument display is variable. If the Driving
Experience Switch is used to change programs,
the display mode adjusts to the respective
program. Changing of the display style can be
disabled on the Control Display.
Changing programs Displaying in the ECO PRO program Displaying in the SPORT, SPORT+ pro-
Press the button in the center These displays support a driving style that saves gram
console repeatedly until the desired on fuel consumption, with more prominent rep- These displays support a sporty driving style by
program appears in the tachometer or resentation of the efficiency display and various highlighting the tachometer, the transmission
instrument cluster. ECO PRO tips. displays and the speed.
Control Display
M W
B
Central locking
Radio/CD/Multimedia
Selector lever
Display
FM/AM 1 2 3
Temperature, left
AUTO
SYNC program
The driver's settings are transferred to the front
passenger side/rear.
Air conditioning
Maximum cooling
4 5 6 7 8
Temperature, right
AUTO
AUTO program, right
A M
A/C
Engaging D, R, and N
Briefly push the selector lever in the desired direc-
tion, beyond a resistance point if necessary.
After releasing the selector lever, it returns to its Automatic Hold
center position. Automatically sets and releases the parking brake,
such as in stop-and-go traffic.
Parking lamps
Daytime running lights
Lamps off
Daytime running lights
Instrument lighting
Dynamic Stability Control DSC Dynamic Damping Control Operating the programs
DSC prevents traction loss in the drive wheels This system reduces undesirable vehicle motion
when driving away and accelerating. when using a dynamic driving style or traveling DSC OFF
DSC also recognizes unstable vehicle conditions, on uneven road surfaces. This enhances driving TRACTION
such as fishtailing or nose-diving. dynamics and comfort as required for the road
Subject to physical limits, DSC helps to keep the surface and driving style.
vehicle on a steady course by reducing engine The system offers different programs. They can be
speed and by applying the brakes at individual selected using the Driving Experience Switch. SPORT+
wheels. SPORT
Driving Experience Switch COMFORT
Dynamic Traction Control DTC The Driving Dynamics Control can be used to COMFORT+
The DTC system is a version of the DSC in which adjust the driving dynamics of the vehicle. For ECO PRO
forward momentum is optimized. The system en- this purpose, various programs are available for
sures maximum forward momentum under special selection that are activated via the two buttons of
road conditions, such as unplowed snowy roads or the Driving Experience Switch and the DSC OFF
loose road surfaces, but driving stability is limited. button.
Activating the Dynamic Traction Control DTC pro-
vides maximum traction. Driving stability is limited
during acceleration and when cornering.
MODE
FM/AM 1 2 3
Changing the entertainment source
Radio
CD/DVD
Music collection
External devices AUTO
OFF
SYNC
CD/DVD drive
A M
A/C
Highlighting the menu item Turn the controller until the desired menu item is Main menu
highlighted. Multimedia
Telephone
Navigation
Office
ConnectedDrive
Vehicle Info
Settings
AM
Satellite radio
Presets
Tone
93.1
94.7 WFME
Tip 93.3 Musica
After a menu item such as "Radio" is
97.1 and R&B
selected, a new panel is displayed. Panels
are individual menu pages on the Control
Display. Panels can overlap.
Navigation
Multimedia
Telephone
1 2 3 4 5 6 7 8
Navigation
Office
ConnectedDrive
Vehicle Info
Settings
Tip
The content of the integrated Owner's
Manual can also be saved on the program-
mable memory buttons.
Divided screen view, split screen Voice activation system 4. Say >F M menu<.
Additional information, such as information from The voice activation system can be used to oper- The list of available radio stations is displayed.
the computer, can be displayed on the right side ate functions by means of spoken commands.
of the split screen. In the divided screen view, the Most menu items that are displayed on the Con- Having the possible commands read aloud
so-called split screen, this information remains trol Display can be voice-activated. 1. Press the button on the steering wheel.
visible even when you change to another menu. 2. Say >Voice commands<.
Example: opening the FM waveband
Switching the split screen view on and off 1. Press the button on the steering wheel.
1. Press the button. 2. Wait for the signal.
2. "Split screen". 3. Say >Radio menu<.
Tip
The functions can also be opened directly
using so-called short commands, such as
>Map perspective<.
To give these commands, speak without
hesitation, loudly, and clearly. Avoid back-
ground noise such as that caused by open
windows.
Integrated Owner's Manual Getting Help feature via iDrive The BACK and OPTION buttons can be used to
The vehicle comes with an integrated Owner's The integrated Owner's Manual for the currently switch between the integrated Owner's Manual
Manual, which contains all of the informa- selected function can be displayed. and the currently selected menu. This is particu-
tion necessary for you to make the best use of 1. Press the button. larly helpful for functions with multiple operating
your vehicle. For safety reasons, the integrated 2. "Display Owner‘s Manual" steps
Owner's Manual is only displayed when the
vehicle is stationary. Printed Owner's Manual
A printed Owner's Manual is contained in the
Selecting the components vehicle document portfolio in the glove compart-
1. Press the button. ment or in the trunk.
2. Turn the controller: call up "Vehicle Info".
3. Press the controller.
4. Select the desired section:
--"Quick reference"
--"Search by pictures"
--"Owner‘s Manual" Tip
Complex principles are explained quickly in
videos in the integrated Owner's Manual.
Navigation
Last destinations 3
Points of Interest ABBINGTON LN
Address book TRENTON
Map
Stored trips
Route information
Entering the address 3. Select "State/Province" or the displayed Ending destination guidance
The address can be entered by way of the build- state or province. 1. "Navigation"
ing number, the street, and the town or cross- 4. "City/Postal code" 2. "Map"
roads location. 5. Enter the town/city. 3. "Guidance"
Example: entering the address by way of the 6. "OK" 4. "Stop guidance"
town 7. Select the town from the list.
1. "Navigation" 8. Enter the street as needed.
2. "Enter address" 9. Enter the street as you would the town.
10. Enter the building number as needed.
11. "OK"
12. Select the building number or range of build-
ing numbers from the list.
13. "Start guidance" or "Add as another dest."
Tip
Destination entry can be operated using the
voice activation system. Town/city, street,
and building number can also be spoken in
one command.
Navigation
Enter address
Last destinations
Address book
Map
Stored trips
Route information
Tone Radio FM
Manual
Bass AM 93.1
Balance Satellite radio 94.7 WFME
Fader Presets
Equalizer Tone 97.1 and R&B
Surround
Volume settings
Tip
The radio stations can be stored on the
programmable memory buttons 1–8. Use
the iDrive to select the radio station and
hold the desired button down for several
seconds.
CD/DVD Audio CD
Storing from a CD/DVD 5. "Store CD" USB interface for data transfer
Music tracks from CDs/DVDs and USB devices The music collection is displayed and the first Connection for importing and exporting data on
can be stored in the music collection on a hard track is played. During storage, the tracks are USB devices, e.g.:
disc in the vehicle and played from there. played in sequence. --Personal Profile settings.
1. Insert the CD or DVD in the CD/DVD player. Observe the following during the storage pro- --Music collection.
2. "Multimedia" cess:
3. "CD/DVD" Do not switch to the CD/DVD drive and do not
4. Select the symbol for the CD/DVD remove the CD/DVD from the CD/DVD drive as
player. this will interrupt the storage process.
Tip
Other audio sources can be activated with- Tip
out interrupting the storage process. Tracks Additional information can be found in the
from the current CD/DVD that have already Owner's Manual on navigation, entertain-
been stored can be called up. ment, and communication.
Connections Bluetooth®
Bluetooth®
Headphones
Paired:
Handy 1
Handy 2
(Empty)
(Empty)
Pairing the mobile phone with the vehicle 9. "Add new device" 12. Enter and confirm the same passkey on the
1. Switch on the ignition. The vehicle's Bluetooth name appears on mobile phone and via the iDrive.
2. Activate Bluetooth on the vehicle and the the Control Display. or
mobile phone. 10. Perform additional steps on the mobile Compare the control number on the Control
3. If necessary, adjust the mobile phone accord- phone, such as searching for the Bluetooth Display with the control number on the
ing to the Bluetooth presettings, e.g. connec- device. mobile phone display. Confirm the control
tion without confirmation or visibility. The Bluetooth name of the vehicle also ap- number on the mobile phone and on the
4. If necessary, deactivate Bluetooth audio. pears on the mobile phone display. Control Display.
5. If necessary, define a 4 to 16-digit number as 11. Select the Bluetooth name of the vehicle on "OK"
the Bluetooth passkey. This is only required the mobile phone display.
for the one-time pairing procedure.
6. "Settings"
7. "Connections" Tip
8. "Bluetooth®" Please ask your BMW center which mobile
phones with a Bluetooth interface are sup-
ported. You can obtain additional informa-
tion on the Internet at:
www.bmwusa.com/bluetooth
13. Select the functions for which the mobile Dialing a number Dialing a number from the phone book
phone is to be used. 1. "Telephone" 1. "Telephone"
14. "OK" 2. "Dial number" 2. "Phone book"
The mobile phone is connected and displayed at 3. Select the digits individually. 3. Select the desired entry.
the top of the mobile phone list. 4. Select this symbol.
The connection is established via the mobile Accepting a call
phone to which the telephone function has been Press the button on the steering wheel.
assigned.
Tip
Up to three mobile phones can be linked Tip
to the vehicle and used as a telephone, an A phone number can also be dialed using
additional telephone, or an audio player. the voice activation system. The connec-
Additional information can be found in the tion is established via the mobile phone
Owner's Manual on navigation, entertain- to which the telephone function has been
ment, and communication. assigned.
The system must be initialized with the correct In order to assure that a flat tire is reported
tire pressure in order for it to reliably respond in reliably, the system must be reset while all tire
detecting a flat tire. inflation pressures are correct.
1. "Vehicle Info" 1. "Vehicle Info"
2. "Vehicle status" 2. "Vehicle status"
3. INIT "Perform reset" 3. INIT "Perform reset" Tire pressure
4. Start the engine; do not drive away. 4. Start the engine; do not drive away. For speeds of up to 100 mph/160 km/h and for
5. "Perform reset" 5. To reset the tire pressure: "Perform reset". optimum driving comfort, heed the pressure val-
Initialization of the tire pressure begins. 6. Drive away. ues in the tire inflation pressure table and adjust
6. Drive away. as necessary.
These pressure values can also be found on the
The FTM is not a substitute for carrying out tire tire inflation pressure label on the driver's door
pressure checks. pillar.
Warning triangle
The warning triangle is located on the inside of
the trunk lid. Release the holders to remove it.
Emissions
The warning lamp lights up:
Emissions are deteriorating. Have
the vehicle checked as soon as
possible.
01 40 2 954 633
© 2014 Bayerische Motoren Werke
Aktiengesellschaft
Munich, Germany
Reprinting, including excerpts, only with the
written consent of BMW AG, Munich.
US English VI/14
Printed on environmentally friendly paper,
bleached without chlorine, suitable for recycling.
*BL295463300A*
Online Edition for Part no. 01 40 2 954 633 - © 07/2014 BMW AG