Professional Documents
Culture Documents
Cs533e Cp533e
Cs533e Cp533e
CP533E
Vibratory Soil
Compactors
2
Padfoot Shell Kit Operator’s Station Visibility
The optional padfoot shell kit makes The new CS533E and CP533E Soil The sloped hood design provides
the CS533E an extremely adaptable Compactors feature excellent operator exceptional operator visibility to the
machine when compacting cohesive comfort and visibility. A propel lever outside edge of the rear tires
or semi-cohesive materials. pg. 9 wrist rest, grouped control gauges and and to the rear of the machine. pg. 8
conveniently located control switches
enhance operator productivity and
reduce fatigue. Four heavy-duty
isolation mounts provide a smooth ride.
Standard rearview mirrors, two front- Serviceability
facing and two rear-facing working The fiberglass hood tilts forward to
lights are provided. Machines with the allow access to the engine and daily
open ROPS/FOPS platform are maintenance points. Daily check points
surrounded by handrails and features are accessible from ground level. The
angled foot rests for sure footing when rear mounted cooling system features a
working on a grade. pg. 6 hydraulic oil cooler that tilts down for
easier access for cleaning. The
operator’s platform tilts forward to
provide convenient access to the
hydraulic components. Vibratory
bearing lube service interval of 3
year/3000 hour keeps maintenance to a
minimum and maximizes production.
The engine lubrication change interval
is 500 hours. The articulation hitch area
features sealed-for-life bearings that
effectively eliminate the need for
maintenance. pg. 10
3
Caterpillar® 3054C Turbocharged Diesel Engine
High-tech four cylinder engine provides outstanding durability, performance,
reliability and operating economy.
4
Vibratory System
The pod-style vibratory system, delivers superior compactive force while offering
serviceability advantages.
5
Operator’s Station
Ergonomically designed for maximum operator productivity while offering excellent
visibility and unmatched comfort.
ROPS/FOPS Cab
Optional cab can increase machine utilization and provides greater year-round comfort in
extreme environment conditions.
6
Open Platform with ROPS/FOPS Canopy
The platform is equipped with a ROPS/FOPS canopy and is enclosed by handrails and
features angled foot rests for sure footing and support when working on a grade.
7
Sloped Hood Design
The sloped fiberglass hood design provides good service access and exceptional
operator visibility.
8
Padfoot Shell Kit
Optional padfoot shell kit expands the application range of the CS533E to work in either
cohesive or semi-cohesive material.
9
Reliability and Serviceability
The CS533E and CP533E Soil Compactors provide exceptional reliability
and serviceability that you’ve come to expect from Caterpillar.
10
Engine Transmission Brakes
Four-stroke, four cylinder Caterpillar Two variable displacement piston Service brake features
3054C turbocharged diesel engine. pumps supply pressurized flow to two Closed-loop hydrostatic drive system
Meets EU directive 97/68/EC Stage II dual displacement piston motors. One provides dynamic braking during
emission requirements. pump and motor drives the drum propel operation.
system while the other pump and motor
Ratings at 2200 rpm kW hp Secondary brake features*
drives the rear wheels. The dual pump
Spring-applied/hydraulically-released
Gross power 97 130 system ensures equal flow to the drive
multiple disc type brake mounted on
Net power motors regardless of the operating
the drum drive gear reducer. Secondary
EEC 80/1269 93 125 conditions. In case the drum or wheels
brakes are activated by: a button on
lose traction, the other motor can still
ISO 9249 93 125 the operator’s console; loss of hydraulic
build additional pressure to provide
pressure in the brake circuit; or when
Net power advertised is the power added torque.
the engine is shut down. A brake
available at the flywheel when the The drive motors have two swashplate
interlock system helps prevent driving
engine is equipped with fan, air cleaner, positions allowing operation at either
through the secondary brake.
muffler and alternator. No derating maximum torque for compaction and
required up to 2500 m altitude. gradeability or greater speed for moving * All machines sold within European Union are
around the job site. A rocker switch at equipped with a brake release pump which
Dimensions allows the manual release of the secondary
the operator’s console triggers an
Bore 105 mm brake system for towing the machine.
electric over hydraulic control to change
Stroke 127 mm speed ranges. Braking system meets EN 500.
Displacement 4.4 liters
Speeds (forward and reverse)
Dual-element, dry-type air cleaner with Low Range 8.0 km/h
visual restriction indicator, glow plug High Range 12.0 km/h
starting aid and fuel/water separator are
standard. Gradeability with or without vibration
(subject to underfoot conditions) 50%
CS533E/CP533E specifications 11
Instrumentation Frame Vibratory System
The instrument panel is located in front Fabricated from heavy gauge steel plate Drum width 2134 mm
of the operator and features a warning and rolled sections and joined to Drum shell thickness 25 mm
system that constantly monitors various the drum yoke at the articulation pivot. Drum diameter
machine systems; alerts the operator if Articulation area is structurally
CS533E 1534 mm
a problem does occur with a light and reinforced and joined by hardened
an audible warning horn. steel pins. One vertical pin provides a CP533E 1295 mm
Warning system includes: Low Engine steering angle of ± 34° and a horizontal Drum diameter over pads
Oil Pressure, High Engine Coolant pin allows frame oscillation of ± 15°. (CP533E only) 1495 mm
Temperature, High Hydraulic Oil Safety lock prevents machine Pads (CP533E only)
Temperature and Low Charge System articulation when placed in the locked Number of pads 140
Pressure. Instrumentation also includes position. Sealed-for-life hitch bearings Pad height 127 mm
an Alternator Malfunction Light, never need maintenance. Frame also
Pad face area 89.4 cm2
Service Hour Meter and Fuel Gauge. includes tie-down points for transport.
Number of chevrons 14
Eccentric weight drive Hydrostatic
Frequency
CS533E
high/low amplitude 31/34 Hz
Operator and Machine Electrical CP533E 31.9 Hz
Protective Equipment Nominal Amplitude
The 24-volt electrical system consists CS533E
Backup Alarm – 107 dB(A) alarm of two maintenance-free Cat batteries, high/low amplitude 1.8/0.85 mm
sounds whenever the machine is electrical wiring is color-coded,
CP533E
in reverse. numbered, wrapped in vinyl-coated
high/low amplitude 1.7/0.85 mm
nylon braid and labeled with component
Forward Warning Horn – located on identifiers. The starting system provides Centrifugal Force
the front of machine to alert ground 750 cold cranking amps (cca). CS533E
personnel. The system includes a 55-amp maximum/minimum 234/133 kN
Seat Belt – 76 mm wide seat belt alternator. CP533E
is standard. maximum/minimum 266/133 kN
12 CS533E/CP533E specifications
Dimensions
All dimensions are approximate.
D F
B C
J H
A
E
G
CS533E/CP533E specifications 13
Estimated Production Productivity Comparisons
Depth Density 150 mm Layer
mm % 650
610
600 100%
Surface 0-500 >98 190 m /h3
550
98%
500
Shallow 500-3000 95-98 345 m3/h
Machine Selection
Application Layer Smooth Padfoot The CS533E and CP533E
Thickness Drum Drum vibratory soil compactors
mm CS533E CP533E provide high compaction
Sand, Clayey or Silty Sand, Mine Tailing 150-300 ● ❒ performance. Ideal for
300-450 ▲ ❒ medium to large construc-
tion projects with low to
Clay, Sandy or Silty Clay, Stabilized Clay 150-300 ▲ ● moderate grades.
300-450 ❒ ▲
Number of Pads 140 120 Less Kneading Padfoot Drum Shell Kit
better for silt
Heavy Clay ● ❒
Pad Height 127 mm 90 mm Less Penetration
better for silt and sandy clay
Sandy Clay ❒ ●
Roll Over Protective Structure/ Transmission Guard consists of a heavy Recording Module provides a visual
Falling Object Protective Structure plate which covers the rear axle, axle gauge for reading worktime, machine
(ROPS/FOPS) canopy is a two-post drive motor and input gearbox. speed, distance covered and amplitude
structure that bolts directly onto flanges selection.
Cab Lift Cylinder is available and
welded to the operator platform.
provides a hydraulic cylinder to raise Compaction Indicator CI 010 includes
Includes two front-facing and two rear-
and lower the operator's platform or cab. LED panel indicating compaction level
facing working lights, handrails and a
with integrated LCD screen displaying
rear view mirror. The structure meets Vibratory Gauge is mounted on the
travel speed and compaction meter
ISO 3449-1992 and ISO 3471-1994. console in front of the operator and
value. Also Includes hand-held printer.
displays the actual vibratory system
ROPS/FOPS Cab includes a cloth
frequency. (Standard with the variable Compactiometer ALFA 022R includes
suspension seat, one access door, tinted
frequency option.) compaction meter value dial, frequency
safety glass windows, electric wipers
meter dial and resonance meter value
front and rear, heater/defroster, two Rotating Beacon includes an amber
dial.
vertically sliding side windows for beacon and mount that can be attached
ventilation, two exterior rear view to machines with ROPS/FOPS canopy Padded Drum Conversion Kit
mirrors, two front-facing and two rear- or ROPS/FOPS cab. (CS533E only) is interchangeable
facing working lights, interior dome with the smooth drum, it includes all
Polyurethane Drum Scrapers for the
light. Cab can be ordered with or without drum components including hydraulic
CS533E provide a front and rear scraper
air conditioning. Cab is fully EROPS motor, brackets, gear and support boxes,
for continuous contact with the drum
rated and meets ISO 3449-1992 and shell, mounts, brackets and pods, front
surface and replaces the standard steel
ISO 3471-1994. bumper and scrapers.
front scraper.
Sun Visor for the front windshield can Smooth Drum Conversion Kit
Two-piece Padfoot Shell Kit bolts onto
be installed on machines equipped with (CP533E only) is interchangeable with
the smooth drum CS533E and features
a ROPS/FOPS cab. the padded drum, it includes all drum
90 mm high pads. Includes special
components including hydraulic motor,
Sun Canopy. Non-ROPS sun canopy for bumper. The Padfoot Shell Kit is not
brackets, gear and support boxes, shell,
use with open platform. compatible with the Heavy Weight
mounts, brackets and pods, front bumper
option.
Roll-Down Sun Screen for the rear and scrapers. Not compatible with
window can be installed on machines Smooth Drum Rear Steel Scraper Heavy Weight option.
equipped with a ROPS/FOPS cab. mounted at the rear of the drum.
Spare Tire with Rim is available for both
Rear View Mirrors are available for Padded Drum Rear Scrapers help keep the flotation tread and the traction tread.
internal use on machines equipped with material from building up on the drum.
Heavy Weight for CS533E only. Specific
a ROPS/FOPS cab or external use on
Speedometer yoke design increases the machine
machines equipped with a ROPS/FOPS
weight by approximately 1500 kg. When
canopy.
equipped with this option, the CS533E
competes in the 12-15 metric ton size
class.
CS533E/CP533E specifications 15
CS533E and CP533E Vibratory Soil Compactors
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at
www.cat.com
Materials and specifications are subject to change without notice. Featured machines in photos
may include additional equipment. See your Caterpillar dealer for available options.
CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and the POWER EDGE trade dress as well as
HEHG9995-2 (11/2007) hr corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.