Professional Documents
Culture Documents
Specification Sheet Number S-101: Pro-Cast Products, Inc
Specification Sheet Number S-101: Pro-Cast Products, Inc
Precast units shall be placed with one-quarter inch minimum to one-half inch
maximum space between units. This will provide a properly designed joint material
volume to compensate for maximum expected movement. Joint sealant material shall
consist of a two part, gun grade, polyurethane sealant which will cure to a 30 shore
A+/-, elongation ability of 750%, tensile strength of 350 PSI and tear-resistand of 85
PSI. Material shall be applied per the manufaturer's recommendation.
POLYURETHANE U227 SHALL BE APPLIED A MINIMUM OF 3/16" EACH BOLT ASSEMBLY SHALL CONSIST OF (1) 1/2" DIA. X 11"
THICK, EDGE TO EDGE, BETWEEN TANKS AND A MINIMUM OF 1/2" DEEP LONG CADMIUM PLATED BOLT, (6) CADMIUM PLATED,
BETWEEN CASTINGS. MATERIAL SHALL ALSO BE USED TO MAINTAIN A 1/2" DIA. FENDER WASHERS, 1/2" DIA. FLAT WASHERS
MINIMUM OF 1/4" OVERCOAT OF THE BOLT ASSEMBLIES (AS REQUIRED FOR SPACING), AND (1) 1/2"-13 HEX NUT
3 FT EARTH COVER
8 FT EARTH COVER