Professional Documents
Culture Documents
Premier Valves Product Selector
Premier Valves Product Selector
Premier Valves Product Selector
premier valves
product selector
Premier Valves
Product Selector
south africa
Discover A World with a Full Line of Products
Premier Valves (PV) has been manufacturing and supplying a broad range of
valve products in South Africa for over 50 years.
The AVK Group acquired a majority interest in the Premier Valves Group in 2014 and
combined it with its existing AVK South Africa business under AVK Holding Southern
Africa (Pty) Ltd (AVKHSA).
Following the merger, AVKHSA has made • Fabricated Stainless Steel Sleeve (Jet Premier Valves also manufactures a range
a substantial investment in expanding and Dispersal/Fixed Cone) valves up to of heavy duty Rubber Lined Butterfly, Ball
upgrading the old Premier Valves factory, DN2500 and up to PN60; and and Wafer Check Valves for Industrial
building a new AVK Manufacturing facility, • Baker (Diaphragm) Control valves in applications, which are marketed under its
a modern office building - incorporating an sizes up to DN600 and pressures up Industrial Petroleum Valves (IPV) brand as
in-house training Academy - and a central to PN50. well as Metal Seated Plug Valves for deep/
distribution centre all on the same 46,000 extreme high pressure mining applications,
sqm site. Detailed information regarding PN rating which are marketed under its Cementation
and size for each product is provided in this Engineering (CE) brand.
This impressive ISO 9001:2015 accredited product selector. Please note, that in many
Group facility, just outside Johannesburg, is cases, the PV Product range represents
the largest valve manufacturing operation an extension (in either size or pressure
in Africa and now employs >200 dedicated rating) to previously available AVK Standard
staff. products.
Premier boving butterfly valve, Gunric Triple eccen- Premier wedge gate
flanged soft seated B125, B150 tric metal seated valve
butterfly valve butterfly valve
series no. 6137 6136 6145 6133
Boving/Von roll Eccentric Double flanged rubber Metal Seated Gunric Metal Seated gate valve
description butterfly lined BA butterfly valve Triple Eccentric Butterfly
valve Valve
Water , Waste water and Cooling water for power Water, Waste Water, Water & waste water
Applications cooling water generation Cooling Water, Mine
Water and Chemicals,
Steam, Gas
Replaceable body seat Vulcanized soft seat body Bubble Tight Shut, Fire Channel Guides and gate
main features liner Safe Certified Design, shoes, Solid Wedge
and soft seal
on disc High Cycle, High Perfor-
mance, Large Diameters,
ISO 5211 Mount
Different disc seal soft EPDM, Bune- N, Viton Seals available in Rising stem and non
options seat materials- EPDM, and Natural rubber • Laminated metal rising stem, Jacking,
Bune-N. Removable seat linings. Gearbox, • Solid metal Screws, Bronze and
and welded body. Gear- pneumatic actuator, • PTFE stainless steel seat
box,lever and counter electric actuator • ANSI B16.10 option, handwheel,
weight, Electric actuator, gearbox, electric actuator
hydraulic actuator.
Baker control valve Fixed cone sleeve valve Flanged multi door check Flanged single door Gunric Tilting Disc Check
valve check valve Valve
Water and mine water Dam outlets, pump sta- Water & waste water Water & waste water Water, Waste Water,
with smaller particles tions, scour Cooling Water and Mine
Water
Self actuated pilot oper- Soft seal with tight Three piece design, multi Seat material options Metal to Metal Seal, Drip
ated, 4:1 shut-off door, replaceable centre, Tight Shut Off, Horizontal
turn down ratio, hydraulic lever arm and counter and Vertical Installation,
globe type weight, Rapid closing Auto closing, Assisted
times without slamming Closing
50mm to 600mm 150mm to 2500mm 500mm to 1800mm 80mm to 500mm 80mm – 2500mm
Pressure reducing, pres- Mild steel and stainless Bronze and stainless Seats in Bronze and Hydraulic Cylinder,
sure relief, flow control, steel fabrication. steel seats stainless steel, Steel weld Step Seat Design, Lever
level control and pump Operated by manual options with counter weight(s),
start up control, elec- gearbox, electric actuator Integral or replaceable
tronic control, diaphragm or hydraulic actuator. seat
available in neoprene/ Custom designs to suit
Viton/EPDM particular applications
-10°C to +70°C -10°C to +70°C -10°C to +70°C -10°C to +70°C -35°C to +425°C
Ductile iron and WCB Mild steel and Ductile iron Ductile iron, cast steel Available in steel, ductile
stainless steel iron, stainless steel, nick-
el alloys, fabricated and
castings available
PN 25 to PN 40 15Mpa - 41 Mpa
valve rating
• IPV reduced bore • IPV Full Bore Ball • IPV full trunnion IPV wafer single door IPV wafer rubber lined
ball valve Valve mounted bore ball check valve butterfly valve
valves
Water fuels chemical and Water fuels chemical and Water, fuels, chemicals Chemical and petro Heavy duty fines for
acids acids and acids chemical mining and slurry
• One piece , fire safe • Two piece , fire safe • Three piece design, Tight shut-off, spring Compact design, no
Full port, Trunnion loaded disc, self aligning gaskets, required and
disc split body, Split body
allows for removal from
line and controls left line,
vulcanized line, operator
gearbox, pneumatic and
electric actuators, Trigger
lever, Disc- 316 Stainless
steel, Sanrico 28
20mm to 200mm 50mm to 250mm 80mm to 300mm 40mm to 600mm 50mm to 600mm
Soft seated, metal Soft seated, metal Soft seated, metal Various material options. Vulcanized liner, opera-
seated, stellite seats with seated, stellite seats with seated, stellite seats with Stellited seat option tor- gearbox, pneumatic,
nitrided ball and vented nitrided ball and vented Nitrided Ball and vented and electric actuators,
ball. Operator- lever, ball. Operator- lever, ball. Operator- lever, Trigger lever, Disc- 316
gearbox, pneumatic and gearbox, pneumatic and gearbox, pneumatic and Stainless
electric actuator electric actuator electric actuator steel, Sanrico 28
Class 150 to Class 300 Class 150 to Class 300 Class 600 to Class 900 class 125 to class 900 PN 16- PN 25
-35°C to +425°C -35°C to +425°C -35°C to +425°C -35°C to +425°C -10°C to +150°C
WCB, 304, 316, Alloy WCB, 304, 316, Alloy WCB, 304, 316, Alloy SG42, WCB, 316 WCB
20, Sanicro 28, Monel, 20, Sanicro 28, Monel, 20, Sanicro 28, Monel,
Titanium etc Titanium etc Titanium etc