Professional Documents
Culture Documents
Answer:: It Is An Equipment To Use For Exchange The Heat (Cooling or Heating Purpose)
Answer:: It Is An Equipment To Use For Exchange The Heat (Cooling or Heating Purpose)
Answer :
Valve is a Mechanical flow control element in the process.
Question 2. What Is Gasket? Where It Is Used?
Answer :
It is sealing member between two flanges.
Question 3. What Is Flange? Types Of Flanges?
Answer :
Flanges used to connect both lines (Fluid, Gas, Oil, Water….)
Question 4. What Is Gland Packing? Uses Of Gland Packing?
Answer :
Gland packing is a Sealing member between two moving parts or stationary.
It is used for arrest the leak through shaft various lines.
Question 5. What Are Prv And Psv?
Answer :
o PRV (Pressure Relief valve) release excessive more than set point, released
fluid re circulated.
o PSV (Pressure Safety Valve) released pressure more than set point to safe
the equipments.
Question 6. What Is Heat Exchanger?
Answer :
It is an Equipment to use for Exchange the heat(Cooling or Heating purpose)
Question 7. What Is Steam Trap ?
Answer :
Steam trap using for removal of Water from Steam.
Question 8. What Is The Use Of Ejector?
Answer :
Ejector is used to create Vacuum for process.
Question 9. What Is Strainer?
Answer :
Strainer is a control element to arrest dust from flowing fluids.
Question 10. What Is Work Permit System?
Answer :
Work Permit is an Authority for doing work in a process plant.
Types:
Cold Work Permit- Without Sparking, Without Heat etc.
Hot Work Permit- With heat (Grinding, Cutting, Welding).