Professional Documents
Culture Documents
Revised Volume 3 Boq 02 04 2019
Revised Volume 3 Boq 02 04 2019
ROAD,ANDHERI(W), MUMBAI
BILL OF QUANTITIES
MAIN SUMMARY
SECTIONS
1
CIVIL WORKS SUMMARY
2
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
1 2 3 4 5 6 7
A EARTH WORK
3
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
d) Pardi to Staircase Tanks / compound walls at all levels. 120 Cum 0.00
C MASONARY WORK
4
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Providing & constructing 200mm thick AAC block walls in
C.M.(1:4) having mortar joints of 6mm average thick
including, ranking out joints scaffolding, curing etc.
complete. Rate to include 100mm thick concrete band M20
at 900mm and lintel level with 4 Nos of 10mm dia bars and 8
11.0 mm dia links at 150mm c/c inclusive of shuttering and 5 Cum 0.00
reinforcement. for long walls beyond 4.5m vertical concrete
band of 200 mm width with similar reinforcement to be
provided.
5
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
D PLASTER
specifications and curing the plaster for not less than two
days and keeping the surface of base coat rough to receive
the sand face treatment 6 to 8 mm thick in C.M. 1:4,
finishing the surface by taking out grains and curing for 14
days scaffolding etc. Rate to include additional thickness if 2200 Sqm 0.00
required to achieve perfect line,level and plumb.
6
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
E PAINTING WORK
7
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
F FLOORING & WALL FINISHES
NOTE : 1) All flooring bedding to be considered for
40mm deep under floor trunking for which no extra shall
be payable for additional bedding.
2) All finished floor to be protected with thick plastic
sheet and plaster of paris ( P.O.P.) application.
3) No Extra payment for additional thickness of
bedding to match adjoining floors
8
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Providing & fixing 20+2 mm thick machine cut mirror polish
1st quality Granite riser 150mm ht. for staircase (black
galaxy or approved equivalent) polished,including backing
coat of 1:4 cement plaster/mortar/cement paste , cleaning etc.
32.0 complete as per Architects details drawingand design (Basic 634 Rmt 0.00
rate of granite is Rs.220/-Sq.ft.)
9
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Providing and laying chamfered Granite cobble rough
stone (Hand cut Block Granite stone sides should be
dressed) of size 100x100x150mm thick and joint to be
filled with sand morter 1:6 and embedded in concrete ,
patterns as per detail drawings , all necessary fixing
arrangement etc complete as directed by Engineer-In-
40.0 300 Sqm 0.00
Charge. The rate includes cost of chamfered granite
cobble stones, sand and labour charges for laying.
Concrete shall be paid for separately under relevent
item. ( Grade of concrete M15)
10
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
:Providing and making wash basin counter in single piece of
18mm to20mm thk. granite 600mm side fixed over 25 to
40mm thk Black Cuddappa ,stand with type construction, by
making zari, in walls upto 75mm deep & fitting the wall
surface by C.M.1:2 with necessary moulding, profile cutting
47.0 ingranite and cudappa including making hole to receive 2 Sqm 0.00
pillarcock for washbasin etc complete and as per detailed
drawing, as directed by the Engineer-In-Charge. (BASIC
RATE Rs.220/sqft)
G FALSCEILING WORK
11
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Providing & Fixing of Aluminium Plank Metal Ceiling
System, comprising of INFILL PANELS ,AXIOMS &
planks of 600mm wide and 1200mm long manufactured of
0.7mm Aluminium perforated 2.5mm dia 5.5mm c/c. The
planks will be manufactured on advanced equipment, which
includes several levelling stages in the manufacturing
process. Plank ends will be raised with pips and stops to
ensure positive engagement into the spring to enable for de-
mounting of individual panels. The plank sides will be
sufficiently high to ensure a minimum deflection across the
length of plank. All planks will be square edged. The plank
52.0 shall be polyester based, powder coated . Plank shall be 129 Sqm 0.00
clipped into clip in profile of 0.5mm thick G.I. The clip in
profile shall be supported from slab by means of suspension
Rod and Hold on Clamp.
Acoustic Felt (Optional): Non-woven felt made of glass-
reinforced fibre glued over the perforation for sound
absorption. (White finish) -Powder coated
12
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Providing and fixing Aluminium Cell Ceiling manufactured
of approved colour consisting of INFILL PANELS,
AXIOMS &Main Runner, Cross Runner, Upper Sections,
Lower Sections all of U-Shaped Profiles 10mm wide x
50mm deep x 0.5mm thick with inwardly returned edges of
2.5mm. Coil Coated on a Continuous Paint Line, Double
baked and Roll formed from enameled Corrosion Resistance
Aluminium Alloy (Al.Mg) for higher strength and good Roll
Forming characteristics. The Main Runner shall be fixed at a
distance of 1.2mtrs c/c and shall be suspended by means of
G.I. Suspension Rod 4mm diameter and a Galvanized
Suspension Spring Clip at a distance of 1.2mtr c/c. The
56.0 Cross-Runner shall be fixed to the Main Runner at a distance 15 Sqm 0.00
0.6mtrs c/c., with a self-locking device. The Upper Section
and Lower section shall be fixed to the Main Runner and
Cross Runner in a form of a Cell Structure of possible
module with a self-locking device. the moduel should be
150mm. (White Finish) Powder coated.
13
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Providing & Fixing Ecopon Solo Square with 1200 x 1200 x
40, easily demountable manufactured from High density
glass wool utilizing the 3RD Technology with Akutex FT
surface on both the sides 85% Light reflectance (of which
more than 99% is diffuse reflection). The panel should have
2.53 sabine value at 1000mm o.d.s. Ambient RH and
temperature does not exceed 75% and 30 degree C. Thermal
resistance (Lamda value-0,035-0,04W/mk).
Certified
60A by the Indoor climate Labelling,emission class M1 for
building materials and recommended by the swedish Asthma
and Allergy Association. Fully recyclable. The glass wool
core of the element is to be tested and classified as non
combustible according to pr EN ISO 1182 with reaction to
fire classification class A2 s1 d0 according to EN 13501-1-
European Standard.
14
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
H WATER PROOFING
Terrace / Balconies (Open to Sky Areas)
Providing and Applying waterproofing for Terrace /
Balconies by following methods as per the specifications
61.0 listed below with a minimum warranty period of 10 years
and Testing of treatment as per the requirements.
A) Flooring
i) All surface area should cleaned up to visible of hair
cracks / aggregate texture. Cleaning of RCC member should
be done by hacking tool, wire brush, wire grinder & air
blower etc. Open cracks & construction joints should be
sealed with cement mortar with additive. All clean & treated
area should be tested for water tightness by flooding water.
All wet spots & water leakage area should be mark for
treatment.
B) Walls
i) All surface area should cleaned up to visible of hair
cracks / aggregate texture. Cleaning of RCC member should
be done by hacking tool, wire brush, wire grinder & air
blower etc. Open cracks & construction joints should be
MARKET sealed with cement mortar with additive. All clean & treated
62.0
RATE area should be tested for water tightness by flooding water.
All wet spots & water leakage area should be mark for
treatment.
FLOORING
i
15
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
All surface area should cleaned upto visible of haircracks
/aggregate texture. Cleaning of RCCmember should be done
by hacking tool, wire brush,wire grinder & airblower etc.
Opencracks & construction joints should be sealed with
cement mortar with additive. All clean & treated area should
tested for water tighness by flooding water. All wet spots &
water leakage area should mark for treatment.
ii
Providing and applying Silcor 560 /Silocte H70V /Bluesil
560 /Aquacoat KS929 ,A high performance ,lowodour,one-
part ,fastcuring ,highsolids ,cold applied
polyurethaneelastomer waterproof membrane over uniform
surface of slab .Apply @ min1.3kgs /sqmin two coats .
membrane is pure polyurethaneelastomer .It should not
contain bitumen or tar and not bleed or stain. Membrane
should have following minimum properties:i) Solid % Vol:
(85 ± 3) ii) Tensile Strength > 2.0 MPa (ASTM D412)iii)
Elongation > 500% (ASTM D412)iv) Shore A Hardness - 60
± 5 (ASTM D2240)v) Chemical Resistance - Excellent
(ASTM C543) shall be applied as per manufacture
specification.
iii
Providing and placing Non woven polyester GeoTextile
fabric 100 GSM with minimum 75mm overlap on the end
sand sides as a separation layer on the membrane.
iv
The slope making part consists of providing and laying
protective and slope making concrete screed of average 75
mm using M20 grade concrete inslope of 1:120 ,Making
wattas at the junctions of horizontal and vertical surface to a
float finish, well compacted, curing for 7 days etc. complete.
v
Providing & laying 10mm thick rolled matrix soil filter cum
drainage system Danodren H15Plus/VTD having
acompressive strength of 600 kg/Sqm, as per manufacturers
specification, complete as directed. The minimum properties 263 Sqm 0.00
should be:i) Puncture resistance (CBR) >2KNii)
Compressive strength 180 KN/m2
Flooring
i
All surface area should cleaned upto visible of hair cracks
/aggregate texture. Cleaning of RCC member should bed one
by hacking tool ,wire brush ,wire grinder & air blower etc.
Opencracks & construction joints should be sealed with
cement mortar with additive. All clean & treated area should
tested for water tighness by flooding water. All wet spots &
water leakage area should mark for treatment.
ii
Providing and applying Silcor 560/Silocte H70V/ Blue
sil560/Aquacoat KS929, A high performance, lowodour,
one-part, fast curing, high solids, cold applied
polyurethaneelastomer waterproof membrane over uniform
surface of slab. Apply @min1.3kgs /sqm in two coats.
membrane is pure polyurethaneelastomer .It should not
contain bitumen or tar and not bleed or stain. Membrane
should have following minimum properties:i) Solid % Vol:
(85 ± 3) ii) Tensile Strength > 2.0 MPa (ASTM D412)iii)
Elongation > 500% (ASTM D412)iv) Shore A Hardness - 60
± 5 (ASTM D2240)v) Chemical Resistance - Excellent
(ASTM C543) shall be applied as per manufacture
specification.
iii
Providing and placing Non woven polyester GeoTextile
fabric 100GSM with minimum 75mm over lapon the end
sand sides as a separation layer on the membrane.
iv
The slope making part consists of providing and laying
protective and slope making concrete screed of average
75mm using M20 grade concrete in slope of 1:120, Making
wattas at the junctions of horizontal and vertical surface to a 47 Sqm 0.00
float finish, well compacted, curing for 7 days etc. complete.
Internal Areas
C.1
Toilet Waterproofing (Sunken)
16
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Providing and Applying waterproofing for Toilet (Sunk
slab) in following parts as per the specifications listed
65.0 below and as approved by the engineer-in-charge with a
warranty of 10 years :
Flooring
i
All surface area should cleaned upto visible of hair
cracks /aggregate texture. Cleaning of RCC member
should be done by hacking tool, wire brush, wire grinder
& air blower etc. Open cracks & construction joints
should be sealed with cement mortar with additive. All
clean & treated area should tested for water tighness by
flooding water. All wet spots & water leakage area
should mark for treatment.
ii
Providing and applying the single component WPM 265
prior to application. All surfaces shall be prime dusing
WPM 265 in one coat at coverage of 6-7 Sqm . Allow
the surface to dry completely. Providing and applying
WP M002/ Traffigard ,two components, advance da
crylic cemen titious modified, fast drying, tough,
uniquely formulated with synthetic microfibers to
increase its strength, applying first coat of WPM002,
sandwiching WPM Deck We bonwet first coat of
WPM002 at internal and external corners, allowing it to
dry completely, after 4Hrs time gap, applying second
coat of WPM002 in perpendicular direction to the
applied first coat and allowing it to dry completely, etc
and complete as per manufacturer's specification. [The
membrane shall confirmto:-Elongation at Break @
7days dry AS1145:332%;Tensile Strength @ 7days dry
AS 1145:1.7MPa and @ Full Cure 28days :2.9MPa ;
Water Absorption ASA121AppK: 4.3%; Shore
Ahardness -ASTMD2240: Dry film 85 – 90 and Wet
film 75 - 80]
iii
Providing and laying10-15mm thick, CM 1:4 screed
admixed with Integral Waterproofing Compound of
approved makes as per manufacturer's specifications
iv
Providing and laying avg.150 mm thick brick /block bat
waterproofing treatment to specified areas viz toilets,
kitchen, sunken are as etc.The slab shall be laid over
with brick/ block bats coba laid & joints filled in with
cement mortar 1:5 in true lines & levels gradient
required slope at outlet /nahni trap (for easy flow of
water /rainwater) .Finally the top surface of brick/
blockbat coba shall be laid over and joints finished with
20mm waterproofing layer with CM1:4 and admixture 225 Sqm 0.00
finished rough to receive further finishes. The treated
surface after 12 to 15hrs. shall be kept ponded for
continuous period of 10days to detect any seepage
/leakage /dampnessifany ,the surface then shall be
cleaned.
Walls
All surface area should cleaned upto visible of hair
cracks /aggregate texture. Cleaning of RCC member
should be done by hacking tool, wire brush, wire grinder
& air blower etc. Open cracks & construction joints
67.0 should be sealed with cement mortar with additive .All
clean & treated area should tested for water tighness by
flooding water. All wet spots & water leakage area
should mark for treatment.
17
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Providing and applying the single component WPM 265
prior to application. All surfaces shall be prime dusing
WPM265 in one coat at coverage of 6-7 Sqm .Allow
the surface to dry completely. Providing and applying
WPM002 /Traffigard, two components, advanced
acrylic cementitious modified, fast drying, tough
,uniquely formulated with synthetic micro fibers to
increase its strength, applying first coat of WPM002,
sandwiching WPM Deck We bonwet first coat of
WPM002 at internal and external corners, allowing it to
dry completely, after 4Hrs time gap, applying second
coat of WPM002 in perpendicular direction to the
295 Sqm 0.00
applied first coat and allowing it to dry completely, etc
and complete as per manufacturer's specification. [The
membrane shall confirmto:-Elongationat Break @7days
dry AS1145:332%;Tensile Strength @7days dry
AS1145:1.7MPa and @ Full Cure 28days:2.9MPa;
Water Absorption ASA121AppK:4.3%; Shore
Ahardness -ASTMD2240: Dry film 85 – 90 and Wet
film 75 - 80]
ii
Providing and applying the single component WPM 265
prior to application. All surfaces shall be primed using
WPM265 in one coat at coverage o 6-7 Sqm Allow the
surface to dry completely. Providing and applying
WPM002/ Traffigard, two components, advanced
acrylic cementitious modified, fast drying, tough,
uniquely formulated with synthetic microfibers to
increase its strength, applying first coat of WPM002 ,
sandwiching WPM Deck Web on wet first coat of
WPM002 at internal and external corners , allowing it to
dry completely, after 4 Hrs time gap, applying second
coat of WPM002 in perpendicular direction to the
applied first coat and allowing it to dry completely,
etc.and complete as per manufacturer's specification.
The membrane shall confirm to:-Elongationat Break @
7days dry AS1145:332%; Tensile Strength @ 7days dry
AS1145:1.7MP a and @ FullCure28days : 2.9MPa;
Water Absorption ASA121AppK: 4.3%; Shore
Ahardness - ASTMD2240: Dry film 85 – 90 and Wet
film 75 - 80]
iii
Providing and laying 20-25 mm thick ,CM1:4 screed
admixed with Integral Waterproofing Compound of 11 Sqm 0.00
approved makes as per manufacturer's specifications
18
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
All surface area should cleaned upto visible of haircracks
/aggregate texture. Cleaning of RCC member should be done
by hacking tool, wire brush, wire grinder & airblower
etc.Open cracks & construction joints should be sealed with
cement mortar with additive. All clean & treated area should
tested for water tighness by flooding water. All wet spots &
water leakage area should mark for treatment.
b
i) Making the grooves of size 15 mm x 15 mm along the line
of construction joints. ii)Drilling holes in concrete upto
75mm depth at regular intervals of approx. 1.0Mtr.c/c
Cleaning the surface of construction joints with clean water.
iii)Providing and fixing PVC grouting socket of 20mm dia
and sealing the periphery of sockets by providing and laying
waterproof mortar in ratio of 1:4 admixed with
Waterproofing Compound @ 150ml per bag of cement. And
filling the grooves by providing and laying polymer mortor
properly, curing etc. complete. iv) Carrying out grouting with
cement slurry grout admixed with expandable grout additives
Nonshrink W/P compound @ 125 ml per cement bag of 50
kg additives to full saturation of grout etc. Complete.
c
v)Providing and applying Vandex BBWhite /Blue Dex
WTrowel Applied Efflorescence Free Cementitious
waterproofing system in two coats @4kgs /sqm by trowelling
as per manufacturer’s specifications. The 1st coat of Trowel
Applied Efflorescence Free Cementitious waterproofing
system shall be applied to the prepared surface. While the 1st
coat is still“ green” a second coat comprising of Trowel
Applied Efflorescence Free Cementitious waterproofing
system. The slurry coatings shall be applied with a stiff
masonary brush or stiff broom and worked into every 325 Sqm 0.00
irregularity on the surface shall be done by means of
trowelling or by spray only.Treatment to floor slabs shall be
carried out by trowel application using a steel trowel into
hardened concrete slab surface including curing, cleaning etc
complete.
d.
Sealing/Packing joints in Outlets Pipes :
Sealing / packing all joints of outlet pipes, etc. with a non-
shrink cementitious grout or microconcrete and topping it
with waterproofing membrane including providing necessary
71.0 formwork for packing the bore & applying a bonding coat to 20 Nos 0.00
enhance adhesion between the packing material and other
surfaces.
19
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
20
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Providing & fixing 50 mm thick solid core BWP Grade
Flush Door of size (900 x 2400) including Teakwood
Lipping patti 12 x 58 mm to achieve exposed periphery
section of flush door with 4mm thick veneer bothside
including moulding, nails,screws,Fevicol .All veneer &
wood surfaces shall be finished with melamine polish as per
82.0 approved tint including necessary scaffolding & cleaning as 48 Sqm 0.00
per Architects detailed drawing & design etc complete. The
Rate is Excluding of Hardware. Basic rate of Veneer Rs.
200/- per Sqft. Door PD1
Door leaf shall be 46mm thick fully flush double skin door, Un-
insulated with vision lite. Door leaf shall be manufactured from
1.2mm (18guage) minimum thick galvanised steel sheet. The
internal construction of the door should be rigid reinforcement pads
for receiving appropriate hardware. The infill material shall be resin
bonded honeycomb core. All doors shall be factory prepped for
receiving appropriate hardware and provided with necessary
reinforcement for hinges, locks, and door closers. The edges should
be interlocked with a bending radius of 1.4mm. For pair of doors
integrated astragals has to be provided on the meeting stile for both
active and inactive leaf. Vision lite wherever applicable should be
provided as per manufacturers recommendation with a clipon
arrangement. The glass should be 6mm clear borosilicate fire rated
glass of relavant rating of the door.
All doors and frames shall be finished Powder coated and shall
have passed minimum 500 hours of salt sprey test.
21
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
External lever handle, 1185, with half cylinder, Silver Finish
1 ( DORMA) CODE NO.8906
Clear fire rated glass, 6mm, for 120min (200 x 300mm) (Schott)
0.06 CODE NO. 1903
Gasket, Fire rated 4mm thick x 13mm, Black (Na) CODE NO.
2 1910
Boxer - Integrated Cam action Door Closer with hold-open slide
arm (Geze)
1
Closing force: 2-4 2V, slide arm dimensions: 20.7mm (w) * 30mm
(h) CODE NO. DORMA TS 73 V
Fire rated seal for grooved frame profile C421 EPDM Black -
6 Hormann (Hor) CODE NO. 1912
Intumescent seal 15 x 2mm for insulated door (all around the
12 shutter) (Na) CODE NO. 1915
Fire rated seal for grooved frame profile C421 EPDM Black
6 - Hormann (Hor) (Black) CODE NO. 1912
d) SH2 Service area fire door size: 1.2 x 2.4m 6 Nos 0.00
22
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Providing and fixing 1st quality Burma T.W. door frame
of size 62 x 112mm with required groove and chamfer
including hold fasts,three on each side providing grooves,
recess embedding hold fast in concrete (1:2:4) /providing
screws and rawl plugs for fixing to concrete members,
applying 2 coats of Solignum paint on timber surface in
86.0 contact with masonary/concrete, applying Melamine polish 35 Rmt 0.00
to match with the shutter etc complete in all respect as per
architect's detailed drg. And design and as instructed by the
Engineer-in-charge. Basic Rate 7500 /- Cu. ft.
DOOR D1 (4 NOS)
DORMA floor stop half dome with 45mm dia with fixing
92.0 accessories, in satin Chrome 1 Each 0.00
RP 38Si, Auotmatic Door Bottom Seal, Heavy Duty, Face
Mounted Version, spring loaded to lift clear of the floor as
soon as the door leaf is opened, suitable to be used on Fire
93.0 1 Each 0.00
and smoke check doors, Seal Material = Silicon, Finish =
Anodized Satin Clear, Length = 48"
HARDWARE SET 7
23
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
DORMA floor stop half dome with 45mm dia with fixing
100.0 accessories, in satin Chrome 1 Each 0.00
DORMA floor stop half dome with 45mm dia with fixing
105.0 accessories, in satin Chrome 2 Each 0.00
DOOR D1 C (9 NOS)
24
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Disable sign plate 3040-D for WC application with fixing
118.0 screws size 125 x 125mm, rounded corners in SS 304 satin 3 Each 0.00
stainless steel finish. Marking in black
DORMA 4014 Wall mounted door stop with coat hook in
119.0 SSS finish 3 Each 0.00
DORMA mop plate 1010-1 with smoothened edges and
rounded corners flush face fixing screws height 150mm and
thickness 0.9mm in SS 304 grade in satin satinless steel.
120.0 3 Each 0.00
Length=5mm short of the shutter width. Max door width
=900mm
DORMA floor stop half dome with 45mm dia with fixing
126.0 accessories, in satin Chrome 3 Each 0.00
RP 38Si, Auotmatic Door Bottom Seal, Heavy Duty, Face
Mounted Version, spring loaded to lift clear of the floor as
soon as the door leaf is opened, suitable to be used on Fire
127.0 3 Each 0.00
and smoke check doors, Seal Material = Silicon, Finish =
Anodized Satin Clear, Length = 48"
DORMA floor stop half dome with 45mm dia with fixing
134.0 accessories, in satin Chrome 1 Each 0.00
13 NOS ( HUB,PANTRY,KITCHEN,EXECUTIVE
DINING, CLERICAL OFFICERS,HUB
ROM,CLERICAL STAFF ENTRANCE) GROUND TO
FOURTH FLOOR
HARDWARE SET 11
25
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
DORMA floor stop half dome with 45mm dia with fixing
139.0 accessories, in satin Chrome 13 Each 0.00
DORMA floor stop half dome with 45mm dia with fixing
144.0 accessories, in satin Chrome 2 Each 0.00
RP 38Si, Auotmatic Door Bottom Seal, Heavy Duty, Face
Mounted Version, spring loaded to lift clear of the floor as
soon as the door leaf is opened, suitable to be used on Fire
145.0 2 Each 0.00
and smoke check doors, Seal Material = Silicon, Finish =
Anodized Satin Clear, Length = 36"
26
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
DORMA 4012 wall mounted door stop dome with 60mm
151.0 length with fixing accessories 5 Each 0.00
Male sign plate 3020-M for WC application with fixing
152.0 screws size 125 x 125mm, rounded corners in SS 304 satin 5 Each 0.00
stainless steel finish. Marking in black
DORMA floor stop half dome with 45mm dia with fixing
164.0 accessories, in satin Chrome 2 Each 0.00
2 NO (AHU) BASEMENT
HARDWARE SET 4A
27
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
DORMA rack and pinion door closer TS 72 EN size 2-4,
with std. arm and with two independent closing valves and
168.0 latching speed adjustable by arm. All adjustment screws face 2 Each 0.00
fixed . Silver finish. As per EN 1154.
DORMA floor stop half dome with 45mm dia with fixing
177.0 accessories, in satin Chrome 1 Each 0.00
RP 38Si, Auotmatic Door Bottom Seal, Heavy Duty, Face
Mounted Version, spring loaded to lift clear of the floor as
soon as the door leaf is opened, suitable to be used on Fire
178.0 1 Each 0.00
and smoke check doors, Seal Material = Silicon, Finish =
Anodized Satin Clear, Length = 48"
DORMA floor stop half dome with 45mm dia with fixing
185.0 accessories, in satin Chrome 3 Each 0.00
28
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
DORMA BB 4330, 5 Knuckle, 2 Ball bearing butt hinges
186.0 size 4" x 3" x 3mm, in SS 304 and in SSS finish. Suitable for 8 Each 0.00
door weights upto 120kgs. Template Drilled
Mortice sash lock 271a with 55mm backset, 20mm square
for end with 72 mm centers and prepared for euro profile
187.0 cylinder including strike plate in satin stainless steel as per 2 Each 0.00
EN 12209.
DORMA floor stop half dome with 45mm dia with fixing
198.0 accessories, in satin Chrome 1 Each 0.00
29
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
DORMA pull Handle TGDI-D 300 back to back with
adjustable fixing for glass, wood and metal doors in satin
stainless steel. The pull handles should have supporting
204.0 1 Pair 0.00
washer with raised bevelling on the outer surface. Length
=300mm, 22mm dia, -SS304
DOOR D3 (4 NOS)
DOOR D4 (1 NO)
DORMA floor stop half dome with 45mm dia with fixing
217.0 accessories, in satin Chrome 2 Each 0.00
DOOR D5 (1 NO)
30
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
DORMA pull Handle TGDI-D 300 back to back with
adjustable fixing for glass, wood and metal doors in satin
stainless steel. The pull handles should have supporting
221.0 2 Pair 0.00
washer with raised bevelling on the outer surface. Length
=300mm, 22mm dia, -SS304
DORMA floor stop half dome with 45mm dia with fixing
231.0 accessories, in satin Chrome 12 Each 0.00
1 NO (CORRIDOR) FIRSTFLOOR
HARDWARE SET 17
DORMA floor stop half dome with 45mm dia with fixing
238.0 accessories, in satin Chrome 2 Each 0.00
DORMA floor stop half dome with 45mm dia with fixing
245.0 accessories, in satin Chrome 4 Each 0.00
31
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
HARDWARE SET 8A
DORMA floor stop half dome with 45mm dia with fixing
251.0 accessories, in satin Chrome 20 Each 0.00
HARDWARE SET 11
DORMA floor stop half dome with 45mm dia with fixing
256.0 accessories, in satin Chrome 10 Each 0.00
DORMA floor stop half dome with 45mm dia with fixing
262.0 accessories, in satin Chrome 6 Each 0.00
32
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
1 NO (CORRIDOR) GROUND FLOOR
HARDWARE SET 11
DORMA floor stop half dome with 45mm dia with fixing
267.0 accessories, in satin Chrome 1 Each 0.00
33
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
additional telescopic panel made of 18mm Marine Ply Panel
provided and fixed to the telescopic element. The movement
of the telescopic panel and the operation of the horizontal top
and bottom seal and must be operated by a single
mechanism. The telescopic element must maintain all the
same quality criteria as the other elements. An aluminium
track profile shall be installed to ensure easy, low-noise
operation of the elements. Additional track cladding must not
be necessary. It shall be possible to implement all right-
angled and positive-guidance stacking track assemblies with
this track design. Each element must be suspended on the
aluminium track by 'maintenance free' multi-directional
trolley capable of withstanding a minimum load of 500kgs
per element. Additional ledge should be provided on the
track for the movement of the trolley providing the extra
strenght to the track and smooth movement of the element.
The trolley shall consist of a four sided die cast aluminium
body. Multidirectional ball bearing wheels shall be steel-
rimmed mounted to each of the four side and shall be capable
of navigating track intersection.
Casement window:
Supplying & Fixing of Aluminium Fixed Window system -
52mm Wide to accomodate a 24mm thk. DGU as per the
spec in the subsiquent line item.The window shall be made
up of Subframe,Base Frame & Clip On Beeding, EPDM
Gaskets , SS304 Screws etc. As shownin the conceptual
drawings and complete. The Aluminum Extrusions shall be
270.0
Powder Coated / Colour Anodised , with approved colour 48 Sqm 0.00
and finish as per thespecs provided. All Gaskets shall be
EPDM and the fastners shall be in SS304.
34
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Providing & fixing in position shoeTM Glass railing system
to be designed Top mounted continuous Base profile, of
height minimum 125mm in Height, Entire System should be
Aluminium SDF Powder Coated. Member Railing Height
should be 1067mm from FFL. Glass Panels of 1500mm
Width, 12mm toughened glass with SS304 caprail fixed with
273.0 EPDM gasket. System should be dry mount and 100% 240 Rmt 0.00
silicone free. Anchor Fasteners should be HILTI. Anchor
Fastener at Centre to Centre 250mm etc complete.
35
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
The infills are to be fully welded between the upper and
lower gate frame
Bottom Rail C channel & 20mm round polished bar
Bottom Italian make Galvanised Wheels 120mm dia. with ball
Rollers bearings and axle with lubrication point
Galvanised adjustable upper guide brackets with guide post
Guide Post constructed from a steel square hollow section of 50 x 100 x
3mm profile
Surface Two coat of grey epoxy primer by spray and three coats of
Finish approved Epoxy paint.
Travel Control unit with limit switches to sense open & close
control positions
system
Capacity 1100 kg
Duty Class Intensive use
Working 80%
cycle
Power 230 (24)
Supply Vac
(Vdc)
Absorption 1.3 A
Torque 38 Nm
Opening / 0.20 m/s
Closing
Speed
Release Key operated
system for
manual
opening
Product 330 x 210 x 300 mm
dimensions
Rack Imported galvanized rack, duly hardened and tempered
Control Three Station Push Button
Switch
Safety Pair of Photocells with anodised aluminium vertical
devices mountings Flashing light
Features:
To adhere to CE marking according to the European
Machinery Directive 2006/42/CE and type tested according
to standard European Norm 13241-1
Manual operation to be possible in case of power failure.
36
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
K FACADE WORK
Smoke seal
Extra over itemsabove, for supplying and fixing smoke seal
made up of 48kg/cu.mt Rock Wool 100mm high, in between
283A two floors and covered with Top & Bottom GI sheet of 24 236 Sqm 0.00
Gauge and sealed etc.
37
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Providing & fixing 20mm thick non combusting calsium
silicate board with 2 hours fire rating as a seal between RCC
Structure & Structural Glazing, Stone Cladding, ACP, etc. at
284.0 all Horizontal & Vertical joints including necessary G.I. 236 Sqm 0.00
Frame work support structure and joint sealing with tape and
fire sealent etc. complete.
38
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Supplying and Installation of Rolled Steel Sections for
Supporting the Semi- Uitsed Structural Glazing System ( If
required) , as Approved by architect profile of all sizes &
shape including all base plates, gusset plates, end plates,
stiffeners, both & nuts fillet/ but welding , splicing
machinary/ grinding of members/joints however required to
288.0 1250 Kgs 0.00
give a neat appearance, including skilled manpower,
equipments, welding machineand other consumables with
one coat of epoxy base primer and 2 coats of epoxy paint and
. complete.
Automatic Extra over above items for supply and install of Automatic
Sliding Door Sliding Door , of Dorma ES 200 Easy Operator 4.5 mt Wide
and 12mm thick clear float fully tempered glass and
Complete, with all accessories, Operators, Sensors , Gaskets
294.0 , installation and complete. The USB Battery backup if 1 Nos 0.00
required shall be charged Extra.
39
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Supplying and ifxing of 30mm Stone on Aluminium Unitised
System , with stone held to the unitised system with
System of UNDER CUT ANCHOR TECHNOLOGY , inluding all
295.0 Dry Stone necessary framing memebers in Aluminium and All Under 998 Sqm 0.00
Cladding Cut Anchors shall be M8 X 30 - SS316 Grade - Imported
VERTCIAL FINS
Supplying & Fixing of Extruded Aluminium Powder coated
Fins - 75mm x 50mm - Placed at a distance of 100mm C/C ,
299.0 including all necessary brackets , anchors , nut bolts and 289 Sqm 0.00
complete.
Cradle System
Providing & installation of Cradle system
1) Parapet mounted Jib system at terrace floor level
consisting of Aluminimum alloy parapet mounted jib.
Parapet Jib sockets fixed at an average of 2000mm using
S.S.304 Expansion Anchors.
L INTERIOR WORKS
40
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
2000 x 2100mm, double leaf door with 100mm frame EV1
306.0 finish consisting of 1 Set 0.00
a) Alexa100 - Door profile, with complete assembly.
b) Corner connectors
c) BB 4330, 5 Knuckle,2 Ball bearing butt hinges, Size : 4" x
3" x 3mm GradeSS 304-finish SSS per Shutter
d) 450mm H Type pull Handle per Shutter
e) 706 Dead Lock Type 1 Package per Shutter
f) ITS 915 concealed door closer with hold open per Shutter.
41
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Providing and fixing Laminate Ply Partition for Cash
counter area made out of 50 x 50 mm approved quality
seasoned teak wood section framing 600mm center to
center,covered with 12mm thick marine Ply on both side,and
1.5mm thick approved laminate. Partitions should be finished
with laminate on all sides. 12mm thick toughen glass with
diamond edge polish should be provided with necessary cut
out in front and side partitions. For Entry door vision panel
311.0 of size 0.23 x 1.00meter and 10mm Thick Glass with 41 Sqm 0.00
necessary lipping Patty, DORMA Hardware like Hinges,
Concealed Door closers,Locking arrangement,Handles,etc.
complete, as per detailed Drawing & as directed by Engineer
in charge.
CORIAN PARTITION
Providing & Supplying at site 8 mm thick Corian partition
to be fixed ply or wall surface edges finised with same
material including silicon sealent including labour,fixing the
312.0 corian,polishing & Buffing as per detail drawing and design 50 SQM 0.00
etc.complete & as directed by engineer incharge.
42
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Wall paneling:-Anutone stretch NRC fabric 1700mm
317.0 wide-system thickness 35mm-from skirting top lvl upto 130 Sqm 0.00
FCL -
Supply and installation of Anutone Stretch NRC wall
fabric system by using FR Grade NRC fabric of size
1700mm width, shall be stretched by using rigid vinyl
Stretch Tracks half wrap,full wrap 15mm (FS15) and
Midseam 15mm (FS15), strand board, synth PF infill with
requisite accessories & tools. The GI strut system includes
GI Cross channel (CC10) having thickness 0.45mm, length
3600mm, knurled web 40mm, depth 10mm and equal flanges
15mm is fastened horizontally to wall at every 600mm
centers.FS15 tracks to be installed on CC10 on marked lines
with woodenbase 10mm thk,after applying Stick S7 adhesive
on both surfaces for a true and continuous secure grip, and
heavy-duty fasteners at 150mm centers on one/both sides of
Stretch Tracks. Strand square edge magnesite bonded
pinewood fiber panels of size 600x1200x10mm having
density 400kg/m3, weight 4kg which is fixed to CC10
,inbetween grippers,with suitable fasteners.
43
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Providing & fixing Profilex Hinged Access panel of
Following Specification:Specially designed to fit seamlessly
into Gyproc India framed systems (panels size 550mm x
550mm to fit between 600mm stud centres),Manufactured
320.0 from 1.2mm zinc coated mild steel, finished with white 23 Nos 0.00
powder coat etch primer & Beaded frame, L N Key Lock. As
per detail drawing and Instruction EIC. etc complete
44
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Pelmet for curtain ( +6” From wall) Providing and fixing
19 mm thk plywood boxing consisting of the following
items. Mode of measurement to be Length of Boxing .
Providing and constructing in proper line and level, vertical
L- type framework in 19 mm ply fixed on to wall @ 600mm
c/c both ways by means of approved Nettlefold G.I.screws to
give the required thickness as per drawings .Rate inclusive 1
mm thk laminate for internal exposed surface as shown in the
drawing. All exposed plywood surfaces shall be finished
with 1 mm thick laminate (basic Rate of Laminate @ 45
/Sqft) & all internal surfaces with 1.0 mm thk Inner
329.0 laminate(range @ Rs.26/ sqft.) of approved make & shade 242 Rmt 0.00
and all exposed edges of plywood to have 25mm x 6mm
thk for top edge BTC lipping. All internal exposed wooden
sections to be French POLISH in matching colour of
laminate complete as per Architects Detailed Drawing and
Instructions of Engineer in Charge.
45
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Providing & Fixing 5mil thick 3M Crystal Vinyl Film
tensile strength at break 25000 PSI, peel strength 5-7
Lb/Inch with visible light transmittance 85%, or
Equivalent Make Product Code :- 3M Scotchcal Frosted
Crystal - 7725-324 & Dusted- 7725-314 Film. Application:-
Printed Glass Graphics, applied on glass and other rigid,
clear substrates. (partitions, doors, windows etc.)
Specification:-Translucent, cast PVC, self-adhesive vinyl, To
334.0 108 Sqm 0.00
reproduce Sand-blasting effect on glass with customized
designs. MCS Warranty of 10 yrs for indoors. Chemical
resistence mild alkalies,mild acids,salt & water. Fire Rating
according to ASTM E84 and is classified as Class A as
defined in NFPA 101 etc. complete.
46
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
NOTE : 1) MS Structure for firefighting gas cylinder units
shall be fabricated in accordance to the loading requirements
of the firefighting agency Structure shall comprise of
pedestals and stringers made out of ISMC 100/150 sections
with 6mm thick top and bottom plate 2) Aluminum air
supply diffuser panels OR selected air flow panels suitable
for AC % of airflow shall be factory made in size of 600mm
x 600mm or 600mm x 300mm within the floor tile. 3) Floor
Panel Meter as per image will be supplied as ordered 4) In
case of seismic zones or in case of areas where pedestals will
be subject to higher impact loads. seismic pedestal bracing
brackets will be provided to pedestats.
WALL PANNELLING
Providing and fixing of 6mm thick annealed Saint Gobain
Glass Planilaque Evolution (premium GRIHA rated
lacquered glass from Saint-Gobain) of approved color by
Architect/ Client / Customer, fixed with Saint Gobain Glass
GLASSMATE (compatible neutral core silicon / double
sided tape) on a perfectly leveled 12mm thick water proof
marine plywood which is mounted on the RCC wall/any
other structure. Lacquered glass must be made industrially
(via curtain coating process); opaque (if viewed against a
support wall), coated with PU lacquer (50 micron thick);
color consistency (measured by Minolta spectrophotometer
344.0 CM5081); highly durable (passes PERSOZ hardness test for 93 Sqm 0.00
minimum 220 oscillatios); humid resistant (conforms to BS
EN 1036 1999); environmentally friendly (no lead, no
arsenic, no copper, noformaldehyde); appropriate recycled
content (12% post industrial / 6% post consumer);
compressive strenght (1000 MPa) & tensile strenght (40
MPa),same as float glass;
47
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Providing & Fixing Plywood storage box for electrical
Distribution Box made by using 19mm thick marine ply for
boxing & shutter and 12mm marine ply for back, 1.0 mm
thick laminate for shutter,internal & outer side of the box,
347.0 All edges to be covered with 6mm thick TW lipping patti , 11 Sqm 0.00
Antitermite treatment to plywood and woodwork,etc
complete as per Architect's Drawing and instructions.
CURTAINS
BLINDS
Supplying & Installing Sunscreen perforated Roller blind
optima series - Basket 125 Tex with fabric specification of - (
Fabric compositition polyster 22 % and PVC 78 % ,
Openenss Factor - 5%, Thickness - 0.68MM +/- 5%, weight
per m2 -480.00gsm, yarns count in wrap/weft/cm 19/18 +/-
5%, Fire Resistance-FR(USA)KFI(Korea), Tear Resistance-
wrap11.9 daN+/-5%,WEFT 150 daN+/-5%,colour fastness-
6-7/8 ( white colour base),artificial light xenon lamp , UV
resistance Min 3(White colour base),width 2.5M & 3 M The
350.0 Roller mechanism shall be a moulded unit made from 640 Sqm 0.00
engineering grade plastic polymer with PVC spring support.
The Fabric shall be attached to the roller tube with high
quality self adhesive tape with manual operation .
48
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
MODULAR FURNITURE
OFFICE TABLE - DGM CABIN
49
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
50
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Help desk Table - Providing & Supplying at site
Modular Table, 25mm thick postformed top, Made out
of Calibrated plywood (IS : 710) BWP with P/F 0.6mm
laminate, other edges finished with 2.0 mm thick PVC
edgeband for exposed edges & 0.8 mm thick for non
exposed edges, 25mm thk Gable ends with
edgeband.Provision for necessary wire management as
directed (Without electrical). Complete with All
necessary hardware & Fixture.
Note : All Furniture to Be Made Out of Calibrated
359.0 1 Nos 0.00
plywood (IS : 710) BWP , All Internal & External
Surfaces of Plywood Finished with Laminate All
Hardware, Complete as per detailed Drawing &
Instructions directed by Engineer in charge. Including
loading, unloading,transportation, installation,With 1
year warranty. Rate to include wire manager system of
approved make. SIZE : 900 x 600 x 750mm.
MODULAR WORKSTATIONS
51
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
CONFERENCE TABLE
Conference Table - Providing and fixing
Conference Table to be made out of 19mm x 2 = 38mm
top/ /12mm thk boxing supports of BWP (IS710) marine
ply cladded with 4mm thk veneer & finished with
melamine from outside & 0.8mm thk Laminate finished
from inside. All expose surfaces to be 4mm Veneer with
48 x 48mm edge lipping for table top & 100 x 25mm
teak wood edge lipping for supporting boxing finish.
Complete with All necessary hardware &
Fixture.Provision for necessary wire management and 6
Nos of deskport of 8 module as directed (Without
electrical).Complete with All necessary hardware &
Fixture.
Note :All Furniture to Be Made Out of Calibrated
plywood (IS : 710) BWP , All Internal & External
368.0
Surfaces of Plywood Finished with 4mm veneer and 3 1 Nos 0.00
coats of P.U.Coating, All Hardware Complete, as per
detailed Drawing & Instructions directed by Engineer in
charge. Inculding loading, unloading,transportation,
instollation.With 1 year warranty. Rate to include all
provision of installation concealed speaker system and
12mm thick BWP Marine ply Apron with 4mm thick
veneer finish on both side and 20 x 12mm teak wood
edge lipping. Rate to include wire manager system of
approved make.
SIZE:10500 x 3200 x 750.
52
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
53
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
STORAGE UNITS
Complete unit - PLY - 18mm thk with 2mm thk PVC
edgeband
54
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
55
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
CHAIRS
Providing, Fixing, Installing & putting in place & in proper
condition, as per layout & as per direction of the Engineer in
389.0 charge. Seating As per following details. Basic rate for 26 Nos 0.00
Leatherite Rs. 750/- per Mtr
56
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
SEAT ASSEMBLY :- The Cushioned seat is made of
Injection molded Plastic outer & inner.Plastic Inner is
upholstered with leatherette and moulded High Resilience
(HR) Ployurethane foam of Density 45±2 kg/m³ and
hardness load 16 ± 2 kgf as per IS:7888 for 25%
compression * Seat Size : 47.0 cm (W) x 48.0 cm (D)
BACK ASSEMBLY :- The Cushioned back is made of PU
Foam with insitu molded MS molded E.R.W.Round Tube of
size 1.9 ± 0.03 Cm x 0.16 ± 0.0128cm. It upholstered with
leatherette. *MID BACK SIZE :- 47.7 cm (W) x 60.1 cm
(D)
ARMRESTS :- The armrest top is moulded from
Polyurethane (PU) and mounted on to a drop lift adjustable
type tubular armrest support made of Ø 3.81 ± 0.03 cm x
0.2 ± 0.01cm thk M.S.E.R.W tube having chrome plated
finish . The armrest height adjustable up to 6.5 ± 0.5cm in 5
steps. SEAT DEPTH ADJUSTMENT :- Seat depth
adjustment is integrated in the seat through a sliding
mechanism.Seat depth adjustment range is of 6.0 ± 0.5 cm .
ADJUSTABLE BACK SUPPORT :- Back frame is
connected to the Up/ Dn mechanism housed in plastic T
Spine .It can be adjusted in the range of 7.42 ± 0.5 cm for the
comfortable back support to suit individual need .
ACTIVE BIO -SYNCHRO MECHANISM :- The adjustable
tilting mechanism is designed with the following features : -
• 360 ° revolving type .
57
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
SEAT/BACK ASSEMBLY: The cushioned seat assembly
consists of seat base moulded in glass-filled Poly-amide,
moulded Polyurethane foam & upholstered with high stretch
knitted polyester fabric. The Cushioned back assembly
consists of back inner moulded in Polypropylene in - situ
moulded with Polyurethane foam & upholstered with high
stretch knitted polyster fabric. * MID BACK SIZE : 44.0
cmCM (W) x 46.0 cm (H) * SEAT SIZE : 48.5 cmCM (W)
x 47.0 cm (D) HIGH RESILIENCE (HR)
POLYURETHANE FOAM: The HR polyurethane foam used
in seat and back cushion is moulded in Density 45±2 kg/m3,
and hardness load 16±2 kgf as per IS :7888 for 25%
compression. TILT MECHANISM, SPINES & SPINE
CONNECTOR: The seat and back are firmly connected to
the base frame and are contilevered in such a way that it
gives a multi-dimensional movement possobility just with a
simple lean on the sides or back, without need for complex
manual adjustments. The cantilevered seat offers impact
cushioning while sitting and synchronises with the back
movement during posture changes. The "s" shaped spines
moulded in high strenth glass filled polyamide and the spine
connector moulded in glass filled polyamide form the back
spine structure involved in multi-dimensional recline motion.
The variable tilt angle recline motion can
58
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
ACTIVE BIO -SYNCHRO MECHANISM :- The adjustable
tilting mechanism is designed with the following features : -
• 360 ° revolving type .
• Front-Pivot for tilt with feet resting on ground and
continuous lumbar support ensuring more comfort . • Tilt
tension adjustment can be operated in siting position .
• 5- position Tilt limiter giving option of variable tilt angle to
the chair .
• Seat/Back tilting ratio of 1:2 • The mechanism housing is
made up of HPDC Aluminium black powder coated .
PNEUMATIC HT. ADJUSTMENT :- The pnuematic height.
adjustment has na ajustment stroke of 10.0 ± 0.3 cm .
PEDESTAL ASEMBLY: The pedestal is Heigh Pressure Die
cast polished Aluminium and fitted with 5nos twin wheel
castors. The pedestal is 65.0±0.5 cm pitch -centre dia
(75.0±1.0 cm. with castor) TWIN WHEEL CASTOR :- 5
nos. twin wheel castors are injection moulded in plastic
having 6.0 ± 0.1 cm .wheel diameter and and assembeled to
pedestal. The product to be tested and passed the quality
standards as laid down under ISO 9001, 1S014001, ISO
18001, OHSAS and BIFMA certifications for quality
assurance. It has a Green Assurance card validated by TUV
India. LOCATION - STAFF & WHEREVER REQUIRED,
( MODEL - LASEDE HIGH BACK )
59
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
ACTIVE BIO -SYNCHRO MECHANISM :- The adjustable
tilting mechanism is designed with the following features : -
• 360 ° revolving type .
• Front-Pivot for tilt with feet resting on ground and
continuous lumbar support ensuring more comfort . • Tilt
tension adjustment can be operated in siting position .
• 5- position Tilt limiter giving option of variable tilt angle to
the chair .
• Seat/Back tilting ratio of 1:2 • The mechanism housing is
made up of HPDC Aluminium black powder coated .
PNEUMATIC HT. ADJUSTMENT :- The pnuematic height.
adjustment has na ajustment stroke of 10.0 ± 0.3 cm .
PEDESTAL ASEMBLY: The pedestal is Heigh Pressure Die
cast polished Aluminium and fitted with 5nos twin wheel
castors. The pedestal is 65.0±0.5 cm pitch -centre dia
(75.0±1.0 cm. with castor) TWIN WHEEL CASTOR :- 5
nos. twin wheel castors are injection moulded in plastic
having 6.0 ± 0.1 cm .wheel diameter and and assembeled to
pedestal. The product to be tested and passed the quality
standards as laid down under ISO 9001, 1S014001, ISO
18001, OHSAS and BIFMA certifications for quality
assurance. It has a Green Assurance card validated by TUV
India. LOCATION - STAFF & WHEREVER REQUIRED,
( MODEL - LASEDE MID BACK )
60
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
ACTIVE BIO -SYNCHRO MECHANISM :- The
adjustable tilting mechanism is designed with the following
features : - • 360 ° revolving type .
• Front-Pivot for tilt with feet resting on ground and
continuous lumbar support ensuring more comfort . • Tilt
tension adjustment can be operated in siting position .
• 5- position Tilt limiter giving option of variable tilt angle to
the chair .
• Seat/Back tilting ratio of 1:2 • The mechanism housing is
made up of HPDC Aluminium black powder coated .
NEUMATIC HT. ADJUSTMENT :- The pnuematic height.
adjustment has na ajustment stroke of 10.0 ± 0.3 cm .
PEDESTAL ASSEMBLY :- The pedestal is High Pressure
Die Cast polished Aluminium and fitted with 5 nos twin
wheel castors . The pedestal is 65.0 ± 0.5 cm . Pitch -center
dia (75.0 ± 1.0 cm with castros) TWIN WHEEL
CASTOR :- 5 nos. twin wheel castors are injection moulded
in plastic having 6.0 ± 0.1 cm .wheel diameter and and
assembeled to pedestal. The product to be tested and
passed the quality standards as laid down under ISO 9001,
1S014001, ISO 18001, OHSAS and BIFMA certifications for
quality assurance. It has a Green Assurance card validated by
TUV India. LOCATION - STAFF & WHEREVER
REQUIRED, ( MODEL - MARVEL HIGH BACK )
61
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
ACTIVE BIO -SYNCHRO MECHANISM :- The adjustable
tilting mechanism is designed with the following features : -
• 360 ° revolving type .
• Front-Pivot for tilt with feet resting on ground and
continuous lumbar support ensuring more comfort . • Tilt
tension adjustment can be operated in siting position .
• 5- position Tilt limiter giving option of variable tilt angle to
the chair .
• Seat/Back tilting ratio of 1:2 • The mechanism housing is
made up of HPDC Aluminium black powder coated .
NEUMATIC HT. ADJUSTMENT :- The pnuematic height.
adjustment has na ajustment stroke of 10.0 ± 0.3 cm .
PEDESTAL ASSEMBLY :- The pedestal is High Pressure
Die Cast polished Aluminium and fitted with 5 nos twin
wheel castors . The pedestal is 65.0 ± 0.5 cm . Pitch -center
dia (75.0 ± 1.0 cm with castros) TWIN WHEEL
CASTOR :- 5 nos. twin wheel castors are injection moulded
in plastic having 6.0 ± 0.1 cm .wheel diameter and and
assembeled to pedestal. The product to be tested and
passed the quality standards as laid down under ISO 9001,
1S014001, ISO 18001, OHSAS and BIFMA certifications for
quality assurance. It has a Green Assurance card validated by
TUV India. LOCATION - STAFF & WHEREVER
REQUIRED, ( MODEL - MARVEL MID BACK )
62
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
1) 4TH FLOOR CONFERENCE ROOM : 60 NO
Providing, Fixing, Installing & putting in place & in proper
condition, as per layout & as per direction of the Engineer in
396.0 charge. Seating As per following details. Basic rate for 10 Nos 0.00
Leatherite Rs. 750/- per Mtr
63
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
SEAT/BACK ASSEMBLY :- The seat & backis made up of
1.2±0.1 cm thk.hot pressed plywood measured as per QA
method described in QCP-OLTA-PL14-18: upholstered with
synthetic leather over moduled High Resilience Polyurethane
foam.
• Mid Back : 51.6 cm (W) x 65.7 cm (H)
• Seat Size : 49.0 cm (W) x 48.8 cm (D)
HIGH RESILIENCE (HR) POLYURETHANE FOAM :-
The HR Ployurethane foamis moduled with density =55+/-2
kg/m³ and hardness load 16 ± 2 kgf as IS:7888 for 25%
compression.
• Fixed armrests top is PU moulded over metal insert.
TUBULAR VISITOR FRAME (VISITOR CHAIR ) : The
tubular frame is powder coated (DFT 40-60 microns)
cantilever structure and made of Dia Ø 2.54 ± 0.03 cm x Ø
0.2 ± 0.016 cm thk M.S. E.R.W tube with a connecting
M.S.Spine welded to it .Back Spine is fitted to the frame
assembly .
The product to be tested and passed the quality standards as
laid down under ISO 9001, 1S014001, ISO 18001, OHSAS
and BIFMA certifications for quality assurance. It has a
Green Assurance card validated by TUV India. LOCATION
- STAFF & WHEREVER REQUIRED, ( MODEL - BEAT
VISITOR )
64
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
1) GR FLOOR STAFF/COUNTERS :25 NOS
2) 1st FLOOR STAFF : 34 NOS
3) 2ND FLOOR STAFF : 42 NOS
4) 3RD FLOOR STAFF : 34 NOS
5) 4TH FLOOR STAFF : 20 NOS
65
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
3Setaer Sofa size:- (2060W x 905D x 855H )
SEAT FOAM: the Seat is made up of PU foam in Density
28±2 kg/cu. Mtr with an additional top layer of supersoft Pu
foam in density 32±2 kg/cu, upholstered with fabric or
leatherette.
BACK FOAM: The back is made up of PU foam Density
28±2 kg/cu, mtr with two additional top layer of supersoft
foam of density 32±2 kg/cu, mtr, upholstered with fabric or
leatherette.
UNDERSRUCTURE: Understructure is made up of 1.2±0.1
cm. thick hot pressed plywood (moisture resistance & termite
proof as per IS:303) & pinewood of cross sections devoid of
major knots & surface defects. 6nos per seat & 3.8mm Dia
Zigzag spring assembly is mounted over understructure for
cushioning purpose.
LEG ASSEMBLY: It is a welded Assembly made in
stainless steel (grade SS 202) tube & plate with plastic
endcap
The product to be tested and passed the quality standards as
laid down under ISO 9001, 1S014001, ISO 18001, OHSAS
and BIFMA certifications for quality assurance. It has a
Green Assurance card validated by TUV India. LOCATION
- STAFF & WHEREVER REQUIRED, ( MODEL - PISA 3
SEATER SOFA )
66
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
3 SEATER SOFA SIZE: 1830W x 775D x 745H
LH/RH SIDE FRAME: The LH/RH side frame is fitted to
the two ends of the seat/back mounting frame to form the leg
assembly. It is made of SS J4 grade Tube Ø 4.44 cm X
1.5mm thk.
SEAT BACK MOUNTING FRAME: The Seat/back
mounting frame assy. holds the two side frames together.
The mounting frames, 2nos are used to connect the side
frames. The mounting frame is made of MS ERW tube
Ø5.08±0.03 cm X 3.15±0.0252cm thk. black painted. The
seat/back is mounted on 4.0±0.03cm x 2.0±0.02cm. x
0.2±0.016cm thk M.S rectangular tube which is welded on
the beam of seat/back mounting frame.
SEAT/BACK ASSEMBLY: The seat/back assembly consists
of 1.2±0.1cm. thk plywood insert measured as per QA
method described in OCP QLTA -p14-18 and moulded with
high Resilience (HR) polyurethane foam having density =
45±2 kg/cm3 with hardness load 16±2 kgf as per IS:7888 for
25% comprassion of the foam. The complete moulded
seat/back assembly is covered with a replaceable in synthetic
leather upholstery cover.
SEAT/BACK SIZE: 54.5cm W x 46.7cm D x 12.5cm T
BOTTOM SHOES: The side frames are fitted with front and
rear bottom shoes made of injection moulded polypropylene.
UPHOLSTERY SYNTHETIC LEATHER: The Sofa is
upholstered with synthetic leather upholstery.
COMPACTOR
67
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Optimizer Storage System is an efficient space saving
storage arrangement catering to a variety of office
requirements. It consists of storage units (457 mm deep) –
fixed or movable – bolted to Undercarriage which rolls onto
the channels, which, are firmly embedded to the ground. The
configurations are Optimizer Push‐pull
type – 1 Bay, Optimizer Push‐pull type – 2 Bay, Optimizer
Drive type – 2 Bay, Optimizer Drive type – 3 Bay, Optimizer
Drive type – 4 Bay, Optimizer Drive type‐ 5 Bay. Each of
configurations have type of blocks such as Single Static (SS /
SD), Single Last (SL / LD), Twin Mobile(TM / TD) – 2 body
back to back. The Construction of Main
body is Rigid Knock Down construction made out of 0.8 thk.
CRCA Steel conforming to IS: 513 Gr.D. Each unit has 6
loading levels formed by 4 Per Number. adjustable shelves.
Optimizer Height from ground is 2462 mm (2362 body + 65
undercarriage + 35 channel system). The
product to be tested and passed the quality standards as laid
down under ISO 9001, 1S014001, ISO 18001, OHSAS and
BIFMAcertifications for quality assurance.
68
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
After the unit is moved, before entering into aisle for
accessing, this knob shall be rotated to lock position. End
stoppers are provided at the end of channels to prevent
derailment. The nuts & bolts are galvanized / blackodized /
Zn Plated. Guide Channels consists of ‘J’
section 2 mm thk HR sheet & 25 mm Square bright bar –
both connected by screws. Label holder made from 2 mm thk
clear transparent Acrylic sheet & having outer dimension of
155 mm X 106 mm.
69
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
M FIRE AND EXTERNAL SIGNAGES
Self contained rechargable emergency Egress light (PEL
LED E/M(S) size 180 x 300mm confirming to I.S.9583-
1981. Aluminium housing body with constant current
417.0 charger of input 230V,50Hz,LED Light & 3 Voltes back up, 32 Nos 0.00
battery type, NI-MH/NI-CD rechargeble etc.complete.
70
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
N MISCELLANIOUS WORKS
71
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Providing and fixing on site leather panelling on wall with
12mm thick backing marine ply finish with 12.5mm based
foam approved quality covered with approved best quality
lather of range 950/- per Sqft. As per Architect design
430.0 double stiching /quilting and moulding, patterns Anititermite 35 Sqm 0.00
Treatment to plywood and wood work including all leads &
lifts complete as per architect detailed drawings etc.
complete.
72
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
O LANDSCAPING WORK
Plantation: Lawn
Planting Lawn on Soft/Hard surface: Providing and filling
Red Hill Earth & Cow Dung Manure mixing in 2:1
proportion, watering to the depth of 1" three times, weeding
after every watering before plantation of the grass, leveling,
rolling after proper compaction, planting of good quality
lawn suckers by dibbling method in staggered fashion at
432.0
specified intervals including transport & unloading. Watering
and proper mowing etc. Maintaining for 6 month after
completion of plantation and replacement of casualties till 1
month.
433.0 Filling good garden soil mix with manure (Fine Dressing) 265 Sqm 0.00
Leveling 265 Sqm 0.00
Weeding 265 Sqm 0.00
Maintenance 265 Sqm 0.00
Planting Shrubs (Labour, transport and unloading)
(Excluding cost of plant) 265 Sqm 0.00
Filling good garden soil mix with manure (Fine Dressing) 25 Sqm 0.00
Leveling 25 Sqm 0.00
Weeding 25 Sqm 0.00
Maintenance 25 Sqm 0.00
Planting Shrubs (Labour, transport and unloading)
(Excluding cost of plant) 25 Sqm 0.00
73
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
74
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
PLUMBING WORK
A SANITARY FIXTURES & FITTINGS:
Supply, Installation, testing and commissioning of
vitreous China wall mounted WC and chair bracket
with concealed cistern including necessary structural
frame, solid plastic seat and cover with C. P. Hinges,
C. I. concealed bracket with bolts sunk into wall
including stop cock with wall flange and 2 way bib
cock with health faucet, C.P. connector, WC pan
connector etc. complete and as directed.
EXECUTIVE
437.0 24 Nos 0.00
(Kohler water closet no
16817IN-SS-0 & Tank instafit no 77029IN-M-NA &
Flush plate no 8857IN-M-CP & Connector no
1046327-S & Paper holder no 37351IN-CP & Health
faucet no 77364IN-CP)
(Queo
water closet no Q357240210 & Tank instafit no
Q507450310 & Flush plate no Q507455120 &
Connector no QUEO & Paper holder no
Supply, Installation, testing and commissioning of
vitreous China wall mounted WC and chair bracket
with concealed cistern including necessary structural
frame, solid plastic seat and cover with C. P. Hinges,
C. I. concealed bracket with bolts sunk into wall
including stop cock with wall flange and 2 way bib
cock with health faucet, C.P. connector, WC pan
connector etc. complete and as directed.
HANDICAP
438.0 3 Nos 0.00
(Kohler water closet no 17647IN-S-
0 & Tank instafit no 77029IN-M-NA & Flush plate
no 75890IN-M-CP & Connector no 1046327-S &
Paper holder no 5633IN-CP & Health faucet no
12927IN-CP)
DRIVER
439.0 2 Nos 0.00
(Kohler water closet no 18131IN-S-0 &
Tank instafit no 77029IN-M-NA & Flush plate no
4177IN-M-CP & Connector no 1046327-S & Paper
holder no 5633IN-CP & Health faucet no 98100in-0)
75
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Supply, Installation, testing and commissioning of
vitreous china wall mounted counter with C. I.
brackets suitable for mounting below granite counter
single lever basin mixer CP waste coupling with CP
brass bottle trap and CP wall flange connection etc
complete and as directed. HANDICAP
441.0 (Queo wash basin no Q117110110 & Waste coupling 3 Nos 0.00
no Q503191420 & Bottle Trap no Q503191820 &
Pillar Cock no Q113112220)
(kohler wash basin no 96051IN-0 & Waste coupling
no 45432IN-CP & Bottle Trap no 7314IN-CP &
Pillar Cock no 16027IN-4ND-CP)
450.0 Providing & Fixing of CP. brass liquid soap container 24 Nos. 0.00
451.0 Providing & Fixing of CP. brass twin coat hook. 29 No. 0.00
Providing and fixing standard size ISI certified
electrical storage water heater 35 litre capacity of
452.0 approved make complete with vaccum and pressure 2 Nos. 0.00
release device and vent valve made in copper vessel
and adequately insulated of approved make.
76
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Providing & Fixing commercial water purifier of UV
technology or Reverse Osmosis Technology with water
flow rate of 300 lph. including all components as per
manufacture specifications, including connections from
454.0 water supply line, and final connection to water cooler 7 Nos 0.00
electric wiring and plug top etc. with all accessories.
77
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Supply, laying, testing and commissioning of G. I. Pipes
"C" Class and fittings fittings suitable for domestic cold
water application rated for a working pressure of 5
kg/cm2 and conforming to IS 1239 (Part-I)-1979 for
piping hung below ceiling above false ceiling and in
vertical shafts including MS spacing/including MS
supports /hangers / brackets as required, jointing making
connection to piping painting all exposed pipes with two
coats of enamel paint over a coat of zinc chromate
primer etc. complete as directed. TERRACE
457.1 15 mm dia. Union ball valve / Brass Ball valve IS 554 0 Rmt. 0.00
457.2 20 mm dia. Union ball valve / Brass Ball valve IS 554 1 Rmt. 0.00
457.3 25 mm dia. Union ball valve / Brass Ball valve IS 554 1 Rmt. 0.00
457.4 32 mm dia. Union ball valve / Brass Ball valve IS 554 15 Rmt. 0.00
457.5 40 mm dia. Union ball valve / Brass Ball valve IS 554 13 Rmt. 0.00
457.6 50 mm dia. Union ball valve / Brass Ball valve IS 554 5 Rmt. 0.00
457.7 65 mm dia. Gate valve IS 778 1 Rmt. 0.00
457.8 80 mm dia. Gate valve IS 778 4 Rmt. 0.00
457.9 100 mm dia. Gate valve / Butterfly valve IS 13095 1 Rmt. 0.00
Supply and fixing of ISI marked 600 mm dia. medium
duty C. I. frame and 'cover conforming to IS 1726 of
458.0 approved pattern weight 28 kg etc complete 'and as 12 Nos. 0.00
directed for water tanks.
Supply and fixing of ISI marked heavy duty C. I. rungs
459.0 of weight 5.3 kg etc complete and as directed. 120 Nos. 0.00
78
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
79
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Supply, laying, testing and commissioning of G. I.
heavy duty "C" class pipes including necessary screwed
malleable iron fittings such as unions, tees, coupling
reducing fittings etc. as per IS 1239 (Part-I)-1979 with
bitumastic hessian cloth over two coats of anti-corrosive
472.0 paints, including excavations, dewatering, backfilling,
wrapping and supporting wherever required etc.
including testing the pipe to a pressure 7.5 kg/cm2
complete and as directed.
478.1 100 s.w. pipe - 12mm wall thickness 14kg/m 10 Rmt. 0.00
478.2 150 s.w. pipe - 16mm wall thickness 22kg/m 150 Rmt. 0.00
478.3 200 s.w. pipe - 18mm wall thickness 33kg/m 10 Rmt. 0.00
80
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Supply, installation testing & commissioning of C. I.
Class L A piping conforming to IS 1536-1976 including
fittings , cutting the pipes to required lengths, laying in
position to 1:1 C:M grade and level, jointing by drip
seal mix, applying three coats of anti corrosive
479.0 Bitumastic paint, supporting with cleat/clamp / bracket /
support, testing and rectifying leakages for piping hung
below slab etc. complete and as directed, including
M.S.bracket supports, hangers etc. as required.
81
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Supply, laying, testing & commissioning of heavy
quality C. I. grating of thickness 38 mm with MS curb
angle 40 x 40 x 6mm runners including fixing with hold
489.0 fasts applying three coats of anti corrosive epoxy paint
etc. complete and as directed.
82
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
83
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
H LIFT 0.00
84
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
ELECTRICAL
499.0 HT Switchgear
HT Switchgear
85
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
and 50% for Neutral, Current Density - 1amp/sqmm)
with Outgoings 1250Amps 433V 4P 50Hz 50KA ICOG
Fixed Manual Type Air Circuit Breaker (ACB) with
Microprocessor based release for Overload , short
circuit & earth Fault protection, Multifunctional Meter
with Class 1.0Accuracy with RS 485 Port, RYB,
ON/OFF Trip Indications, OUTDOOR ENCLOSURE
having IP54 IP54 degree of protection for HT & LT
switchgear compartment & IP23 degree of Protection
for Transformer compartment, Powder /Colour Caoated
Enclosure, with Interconnection Between HT switchgear
& Transformer using 1Cx3x185Sq.mm XLPE AL
Single core cable. Interconnection between Transformer
& LT switchgear using Al. Busbars. Internal earthing
connections by using 50x6 mm GI Strips including
Transformer Neutral, Complete as per specification
With necessary permission Of Electrical Inspector. Item
to be include HT Switchgear : Trf. Feeder Metering
Digital
Multifunction meter with A,V,KW,KWH,PF, CI-0.5
with RS-485 port ( Conzerv-EM 6400) and 3 nos.11KV
single core ring type metering CTs with 150/1 A for
transformer feeder. One no 3 phase, HT PT Panel
Common for the complete RMU with control MCB, 6A,
86
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
500.0 L.T PANELS
Supply Installation testing commissioning of M. V.
Switchboards as per specifications given under.
Unloading at site by crane, to place of installation,
Erection including assembly of panel sections, aligning
of busbars / earth bus etc Testing and commissioning
including supply & fixing 6" x 3" M.S. base channels on
cable trench / Floor , including painting of channels by 2
coats or red oxide paint and 2 coats of enamel paint (for
switchboards to be mounted on trench and including
supply, fixing and painting as above of floorstand 100 x
50 M.S, channel all sides, Panels Under
Busbars
1250 Amps TP(N) 50 KA Al. Heat Shrink color PVC
500.1 sleeved. With 1250 Amp 50 KA rated 433 Volt Surge
Suppressor on Bus bar WITH 100AMP 4P MCCB 50 1 Set 0.00
KA THERMAL RELEASE
OUT GOING
2 Sets of 630 A TPN 36 KA MCCB each with SC /
OC / EF Microprocessor based releases with following
mountings on each Feeder..
2 Nos. LED ON / OFF Indicating Lamps with 1 Nos.
Control MCB's
1 No Multi function Meter with RJ 485 Port for
Down load the Reading Data in Computer with software
. With 2 Nos. Control MCB's
2 Nos. 630/ 5A 15 VA class 1
87
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
2 Sets of 320 A TPN 36 KA MCCB each with SC /
OC / EF Microprocessor based releases with following
mountings on each Feeder..
2 Nos. LED ON / OFF Indicating Lamps with 1 Nos.
Control MCB's
1 No Multi function Meter with RJ 485 Port for Down
load the Reading Data in Computer with software . With
2 Nos. Control MCB's
2 Nos 320 / 5A 15 VA class 1
88
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
1 Sets of followings
1250 A 4P EDO 50 KA
ACB each with SC / OC / EF / UV M.P. based releases
with following mountings on each feeder.
7 Nos. LED R-Y-B Indicating Lamps. With 7 Nos.
Control MCB's
Indicating Lamps
for D.G operation 9 Nos
3 Nos.1250 / 5A 15 VA class 1
1 No Multi function Load Manager & KWH Meter with
RJ 485 Port for Down load the Reading Data in
Computer with software, With 3 Nos. Control MCB's
1 No 0 to 1250 Amp Ammeter 96 sqmm size Digital
and selector switch.
1 No 0 to 600 Volt Voltmeter 96sqmm size and selector
switch
Hour Meter with 1 Nos. Control MCB's
BUS BAR
1250 Amps TP(N) 50 KA Al. Heat Shrink color PVC
sleeved.
OUT GOING
1 Sets of 1250 A 4P EDO 50 KA ACB each with SC /
OC / EF / UV M.P. based releases with following
mountings on each feeder.
7 Nos. LED R-Y-B Indicating Lamps. With 7 Nos.
Control MCB's
3 Nos.1250 / 5A 15 VA class 1
1 No Multi function Load Manager & KWH Meter with
RJ 485 Port for Down load the Reading Data in
Computerwith software,. With 1 Nos. Control MCB's
1 No 0 to 1250 Amp Ammeter 96 sqmm size Digital
and selector switch.
1 No 0 to 600 Volt Voltmeter 96sqmm size and selector
switch
Incomer
89
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
1 Sets of 630 A TPN 36 KA MCCB each with SC /
OC / EF Microprocessor based releases with following
mountings on each Feeder..
7 Nos. R-Y-B / ON / OFF/ TRIP / READY TO CLOSE
Indicating Lamps with Control MCB's
Busbars
1 No6 stage = 6 Stage APFC relay.
630 Amps TP(N) 36 KA Al. Heat Shrink color PVC
sleeved.
OUT GOING
3 sets each with - set of 63 A TP 15kA MCCB
- 63A TP contactor with ON-OFF P.B.'s, ON-OFF
Indicating Lamps & control MCB's - 0 - 60 Sec timer
- 20 KVAR APP (D/L) Capacitor
INCOMEING
3 Sets of 160 A TPN 25 KA MCCB each with SC / OC
Microprocessor based releases with following
mountings on each feeder.
6 Nos. R-Y-B / ON / OFF/ TRIP Indicating Lamps
with Control MCB's
Busbars
500.4
320 Amps TP(N) 25 KA CU. Heat Shrink color PVC 1 Set 0.00
sleeved.
OUT GOING
1 Sets of 160 A TPN 25 KA MCCB each with SC / OC
Microprocessor based releases with following
mountings on each feeder.
3 Nos. R-Y-B / ON / OFF/ TRIP Indicating Lamps
with Control MCB's
90
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
2 Sets of 63 A TPN 15 KA MCCB each with SC / OC
THERMAL based releases with following mountings on
each Feeder..
1 No Multi function Meter with RJ 485 Port for Down
load the Reading Data in Computerwith software With
3 Nos. Control MCB's
2 Nos.63/ 5A 15 VA class 1
INCOMEING
1 Sets of 320 A TPN 25 KA MCCB each with SC / OC
Microprocessor based releases with following
mountings on each Feeder..
7 Nos. R-Y-B / ON / OFF/ TRIP Indicating Lamps
with Control MCB's
Busbars
320 Amps TP(N) 36 KA Al. Heat Shrink color PVC
sleeved.
OUT GOING
1 Sets of 250 A TPN 25 KA MCCB each with SC / OC
500.5
Microprocessor based releases with following 1 Set 0.00
mountings on each Feeder..
3 Nos. R-Y-B / ON / OFF/ TRIP Indicating Lamps
with Control MCB's
91
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Supply, installation, testing, commissioning of power
Distribution panel with following specification. Panel
made form 14 swg CRCA sheet, Free standing, floor
mounted, front hinged, for indoor use, cubicle type, rear
removable, underlined and removable bottom gland
plates for incoming and outgoing connections, dust and
vermin proof with TPN Alluminium bus bar, complete
with internal wiring, ferrules name plates, powder
coated, with complete interlock, gaskets, and following
accessories. Minimum Panel size should be AS PER
LATEST IS STANDAREDS Panel should be
comapatible RS 485 communications port for BMS
connectivity As Per single line diagram. LIFT
PANEL
INCOMEING
1 Sets of 100A TPN 25 KA MCCB each with SC / OC
Microprocessor based releases with following
mountings on each Feeder..
3 Nos. R-Y-B / ON / OFF/ TRIP Indicating Lamps
with Control MCB's
Busbars
100 Amps TP(N) 25 KA Al. Heat Shrink color PVC
sleeved.
OUT GOING
4 Sets of 63 A TPN 16 KA MCCB each with SC / OC
Thermal based releases with following mountings on
each Feeder..
12 Nos. R-Y-B / ON / OFF/ TRIP Indicating Lamps
with Control MCB's
INCOMEING
1 Sets of 630 A TPN 36 KA MCCB each with SC /
OC / EF Microprocessor based releases with following
mountings on each Feeder..
7 Nos. R-Y-B / ON / OFF/ TRIP / READY TO CLOSE
Indicating Lamps with Control MCB's
92
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
10 Sets of 63 A TPN 16 KA MCCB each with SC / OC
Thermal based releases with following mountings on
each Feeder..
3 Nos. R-Y-B / ON / OFF/ TRIP Indicating Lamps
with Control MCB's
INCOMEING
1 Sets of 40A TPN 16 KA MCCB each with SC / OC
Thermal based releases with following mountings on
each Feeder..
7 Nos. R-Y-B / ON / OFF/ TRIP / READY TO CLOSE
Indicating Lamps with Control MCB's
Busbars
40 Amps TP(N) 16 KA Al. Heat Shrink color PVC
sleeved.
OUT GOING
3Sets of 32 A DP 10 KA MCB each with SC / OC
THERMAL based releases with following mountings on
each Feeder..
3 Nos. LED ON / OFF /TRIP Indicating Lamps with.
Control MCB's
INCOMEING
93
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
1 Sets of 63A TPN 16 KA MCCB each with SC / OC
Thermal based releases with following mountings on
each Feeder..
7 Nos. R-Y-B / ON / OFF/ TRIP / READY TO CLOSE
Indicating Lamps with Control MCB's
Busbars
63 Amps TP(N) 16 KA Al. Heat Shrink color PVC
sleeved.
500.9 1 Set 0.00
OUT GOING
2 Sets of 32 A TP MPCB (Motar Protection Circuit
Breaker)
Suitable Contactor & relay As per Type Two
Cordination
Suitable starter Star-Delta starter or DOL starter as per
requiremnet OEM of pumps or as per pump technical
data sheet
3 Nos. LED ON / OFF /TRIP Indicating Lamps with.
Control MCB's
94
500.10 1 SET 0.00
Busbars
40 Amps TP(N) 16 KA Al. Heat Shrink color PVC
sleeved.
OUT GOING
2Sets of 16 A TPN 10 KA MCB each with SC / OC
THERMAL based releases with following mountings on
each Feeder..
3 Nos. LED ON / OFF /TRIP Indicating Lamps with.
Control MCB's
INCOMEING
95
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
1 Sets of 63A TPN 16 KA MCB each with SC / OC
Thermal based releases with following mountings on
each Feeder..
7 Nos. R-Y-B / ON / OFF/ TRIP / READY TO CLOSE
500.12 Indicating Lamps with Control MCB's 1 Set 0.00
Busbars
2 Sets of 32 A TP MCB 10 KA
2 Sets of 40 A TP MCB 10 KA
96
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Supplying, fixing and commissioning of 3 GANG
similer to Legrand Plexo Boxes, with 6/16 A SOCKET
& 16 A SWITCH WITH INDICATOR LAMP IP55
RATED,,INSULATED SURFACE MOUNT WALL
504 BOX WITH TRANSPARENT LIFT LID COVER 29 Nos 0.00
LATED SURFACE MOUNT WALL BOX WITH
TRANSPARENT LIFT LID COVER 67.5mmX45mm
FOR LIFT SHAFT
97
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
3½ core 150 sq. mm. aluminium conductor
508.5 2 Nos 0.00
508.6 3½ core 120 sq. mm. aluminium conductor 4 Nos 0.00
508.7 3½ core 95 sq. mm. aluminium conductor 12 Nos 0.00
508.8 3½ core 70 sq. mm. aluminium conductor 2 Nos 0.00
508.9 3½ core 50 sq. mm. aluminium conductor 4 Nos 0.00
508.10 3½ core 35 sq. mm. aluminium conductor 6 Nos 0.00
508.11 3½ core 25 sq. mm. aluminium conductor 4 Nos 0.00
508.12 4 core 16 sq. mm. aluminium conductor 2 Nos 0.00
508.13 4 core 10 sq. mm. aluminium conductor 2 Nos 0.00
508.14 4 core 25 sq. mm. copper conductor 2 Nos 0.00
508.15 4 core 16 sq. mm. copper conductor 30 Nos 0.00
508.16 4 core 10 sq. mm. copper conductor 32 Nos 0.00
508.17 4 core 6 sq. mm. copper conductor 20 Nos 0.00
508.18 4 core 4 sq. mm. copper conductor 14 Nos 0.00
508.19 3 core 6 sq. mm. copper conductor 10 Nos 0.00
508.20 3 core 4 sq. mm. copper conductor 18 Nos 0.00
508.21 3 core 4 sq. mm. copper conductor 2 Nos 0.00
CABLE TRAY
Providing & laying Hot dipped galvanized
ladder/perforated type cable tray manufactured from 16
swg (2 mm thick) GI sheet complete without cover of
the following sizes. The rate shall include Bends, tees,
509
for way all supporting brackets, anchor fasteners,
threding rods, screws, bolts, nuts etc. necessary coupler
plates & hardware in approved manner.
98
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
TOTAL SECTION - ' C ' 0.00
99
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Point wiring for Plug, with ISI mark 1.1 KV grade PVC
insulated copper wire with 2.5 Sq.mm ISI mark PVC
insulated copper wire in green color used for earthing in
existing PVC conduit on the light or fan board complete
with 3 pin 6A modular type socket and 6 Amp modular
513.7 type Switch erected on original sheet metal / non 20 Point 0.00
metallic un-breakable box of light or fan board flush on
wall with double (mounting & cover) plate.
100
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
516.1 600 MM 6 Nos 0.00
516.2 800 MM 4 Nos 0.00
516.3 1000 MM 4 Nos 0.00
516.4 1200 MM 4 Nos 0.00
516.5 1800 MM 2 Nos 0.00
516.6 For customised legnth upto 2400 mm 8 Mtr 0.00
516.7 For customised legnth upto 3600 mm 12 Mtr 0.00
516.8 Power Adaptor 40 Nos 0.00
DISTRIBUTION BOARDS
Supplying and Installation of MCB Distribution Boards
with Double Door (IP 43) or latest factory made to be
mounted on M.S. Frame welded to structure / grouted in
517.0 wall. The M.S. frame should be painted with 2 Coats of
Zinc chromate primer & 2 Coats of enamel paint.
INTERNAL FIXTURES
22 watt Batten. Philips Cat: BN021 LED 20S PSU WH
518.1
4000K 130 Nos 0.00
518.2 12Watts recess downlights philips cat DN 193B 250 Nos 0.00
31Watts recess 2X2 philips Cat RC 380B LED 36S-
518.3
4000 G4 L60 W60psu 120 Nos 0.00
9Watts recess Dwonlights philips cat LUX space
518.4
DN589B 300 Nos 0.00
31Watts decorative 2X2 philips cat power balance
518.5
RC600B 25 Nos 0.00
23watts 4fit suspended fixture. Philips slim SP780P
518.6
LED 26S-6500 PSU W6L224 30 Nos 0.00
46 watt 8ft Suspended Fixture. Philips Cat:Pureline slim
518.7
SP780P LED52S-6500 PSU W6L224
Large luminoise Surface for conference room. Philips
518.8 cat one space prefeb (1800X2700mm) installation extra 6 Nos 0.00
101
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Floodlight For walls: VAYA FLOOD MP G2, 3000K,
518.17
40 DEG, CE/CQC 50 Nos 0.00
519.0 EARTHING
SITC of Earthing Station with the use of 32 mm dia
Copper bonded MS rod, 3 mtr long with filling of min 2
519.1 bags of compound complete with chamber, lid cover and 3 Nos 0.00
tap off point.
SITC of Earthing Station with the use of 50 mm dia
Copper bonded MS rod, 3 mtr long with filling of min 2
519.2 bags of compound complete with chamber, lid cover and 3 Nos 0.00
tap off point.
SITC of Cu Earthing Station with 600 x 600 x 3.15mm
519.3 thick Cu. Plate and all accessories required to complete 11 Nos 0.00
the earthing station.
SITC of G.I. Earthing Station with 600 x 600 x 3.15mm
519.4 thick GI Plate and all accessories required to complete 26 Nos 0.00
the earthing station
Supply & applying additional Bags of Compound-50kg
519.5
bags. 10 Nos 0.00
Supply and Laying cu./GI. earthing strips for
interconnecting the earthing stations, panels, DB's etc. in
520.0 built-up trenches, on walls/ceiling, buried in ground 0.00
generally as specified and shown on drawings complete
with :
D.G
102
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Supplying, erecting and commissioning of diesel
generating set with alternator of 750 kVA output
continuous rating, 3 phase, 415 V, 50c/s 0.8 p. f. A.C a
totally enclosed air cooled / liquid cooled multi-cylinder
diesel engine developing suitable BHP at 1500 rpm with
10% overload for 1 hour in 12 hours, along with
standard accessories, self-excited, self-regulated, screen
protected alternator with static excitation system running
at 1500 RPM as per IS 4722- 2001 with voltage
regulation +/- 5 %. Both the engine and alternator direct
coupled on a common fabricated steel base frame and
mounted on anti-vibrating pads with AMF control panel
524.0 with battary charger and remote startcomprising of 1 Nos 0.00
meters, switchgears, indicators connected with suitable
wires/cables,
the complete set enclosed in composite acoustic
enclosure as fully assembled integral unit made of 16
SWG CRCA Sheet, sound absorbing material to restrict
sound level upto 75 dB at 1.0 m, provided with first
filling of oil, diesel etc. and obtaining necessary
approval from Electrical Inspector
Exhaust System
SITC of DG set Exhaust piping with cladding /
Clamping / 50mm MS Insultation etc. Complete.
Exhaust pipes shall be run horizontally till stack & then
vertically up till 33 mtr from ground. stack design shall
be as per vendor subject to clients structural consultant
approval. Foundation for stack shall be carried out by
DG set Vendor as per Approval from Client / Clients
strictural consultant. stack shall be from MS Angles /
525.0 channels / flats etc. which shall be applied with Anti rust 1 Set 0.00
treatment - 2 coats + paint - minimum 2 coats. stack
shall be earthed. Stack-1 shall compprise of following
Pipe from 750KVA DG set-1 - Horizontal run +
Vertical = 35mtr
LIFT
Passenger Elevator
A)
S/I/T/C of Passenger Elevator with 10 persons,680kg.
Speed 1.50m/s for B,S,G,1,2,3,4 & 5 Floor with 8
stops and 8openings with special features SS Door
Frames, Gearless machine in machine room locaated in
lift well. Control single collective selective control.
Drive ACVVVF Controller, power supply 415volts,
3phase, 50Hz, AC. Car door will be 2panel automatic
center opening door with ACVF drive in stainless steel
hairline finish. Landing door will be 2automatic center
opening door in stainless stell hairline finish. All car
wall in stainless steel hairline finish, 20mm recess
provided for granite finish/ marble flooring. Rounded
handrail in stainless steel finished on 3walls of car. Car
526.0 operating panel is half height-flush mounted. individual 1 Nos 0.00
landing operating panel for each elevator. Features
incuded :- 1) Alarm button in car operating panel with
battery back-up. 2) Automatic Operation for car fan. 3)
Adjustable door open times. 4) Anti-nuisance. 5) Door
Nudging. 6) Emergency light 7) Full load by-pass. 8)
Home landing. 9) Infra-red screen for car door. 10)
intercom. 11) Overload function with audio-visual
indication in car operating panel. 12) phase failure and
phase reversal protection.13) Automatic resucue device
in case of power failure. Hoist way dimension 2000mm
wide X 2400 mm depth. Car travel 22600mm, overhead
5000mm, pit depth 1800mm. car dimensions 1100mm
wide X 2000mm depth X 2700mm high. door high
2400mm
103
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Elevator
A) S/I/T/C of Passenger Elevator with 13
persons,884kg. Speed 1.50m/s for UB,G,1,2,3,4 Floor
with 6 stops and 6openings with special features SS
Door Frames, Gearless machine in machine room
locaated in lift well. Control duplex collective selective
control. Drive ACVVVF Controller, power supply
416volts, 3phase, 50Hz, AC. Car door will be 2panel
automatic center opening door with ACVF drive in
stainless steel hairline finish. Landing door will be
2automatic center opening door in stainless stell hairline
finish. All car wall in stainless steel hairline finish,
20mm recess provided for granite finish/ marble
flooring. Rounded handrail in stainless steel finished on
3walls of car. Car operating panel is half height-flush
527.0 mounted. individual landing operating panel for each 3 Nos 0.00
elevator. Features incuded :- 1) Alarm button in car
operating panel with battery back-up. 2) Automatic
Operation for car fan. 3) Adjustable door open times. 4)
Anti-nuisance. 5) Door Nudging. 6) Emergency light 7)
Full load by-pass. 8) Home landing. 9) Infra-red screen
for car door. 10) intercom. 11) Overload function with
audio-visual indication in car operating panel. 12) phase
failure and phase reversal protection.13) Automatic
resucue device in case of power failure. Hoist way
dimension 2000mm wide X 2400 mm depth. Car travel
22600mm, overhead 5000mm, pit depth 1800mm. car
dimensions 1100mm wide X 2000mm depth X 2700mm
high. Door to be 2400mm high,. One elevator have
12mm toughened glass back and glass landinng doors.
Home Elevator
A) S/I/T/C of
Passenger Elevator with 400kgs. Speed 0.50m/s for
B+S+G Floor with 3stop and 3 openings. Variable
voltage variable frequency drive. Opreation will be
microprocessor based simplex collective selective
control with provision of attendant control. Separate
landing push button box for all landings with scrolling
indicator.Stops & openings 03 Stops & 03 Openings.
Car travel 6.8 meter, According automatic door with
light beam, unfinished floor with 20mm removable
insert, wooden handrail. For landing entrance interloack
by supplier, brushed brass or st.st finish, lighted call
button, digital floor position indicator. car size 914mm
wideX1219mm deepX2134mm high. Door opening
528.0 will be 800mm wide X 2000mm high. elevator well 1 Nos 0.00
1397mm wide X 1340mm deep. Elevator pit depth
160mm overhead 3100mm . Main supply will be 415
volts, 3phase, 50Hz. A.C. Indicator for all landings,
floor position indicator for all landings, Special
Features: 1) Car gate safety switch. 2) Automatic car
lighting with override switch. 3) Automatic homing to
the designated floor. 4) Ventilation in the ceiling. 5)
Toggle emergency stop switch. 6) Recessed telephone
with brass or st. St. cover. 7) Slack chain safety device
and switch. 8) car top Switch.
104
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
105
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
C IBMS 0.00
106
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
107
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
B FIRE ALARM SYSTEM
Addressable Fire Alarm system
Supply, Installation, Testing & Commissioning for
Networkable Analog Addressable Fire Alarm Control panel
with battery back up for 24 hours normal operation and 60
minutes alarm operation. The control panel, battery charger
etc, shall be UL listed.The panel shall be with 2 loop
capacity and shall be expandable upto 10 loop. The Fire
Alarm Control Panel shall include a full featured operator
interface control and annunciation panel that shall include a
backlit 640-character liquid crystal display, individual, color
coded system status LEDs, and a QWERTY style
alphanumeric keypad for the field programming and control
of the fire alarm system. The control panel shall be capable
of expansion via up to 10 SLC modules. Each module shall
support a maximum of 318 analog/addressable devices for a
535.0 maximum system capacity of 3180 points. The system shall 1 Nos 0.00
be capable of 3072 annunciation points per system regardless
of the number of addressable devices. The panel shall be UL
listed and FM approved and comply UL 864, 9th Edition
requirement. The enclosure shall also be UL listed. The
quoted rate shall include supply of necessary software and
harware for progamming the panel with all necessary licence.
Panel to have provision for adding Digital Voice Evacuation
and Fire Fighters Telephone.
108
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Supply, Installation, Testing, commissioning of Analogue
Addressable Flash scan Type Photoelectric smoke detectors
having Rotary, decimal addressing system with standard base
and junction box. The detector shall be capable to address in
the range of 1-159. The detector shall be with Visible bi-
542.0 color LEDs for 360 deg viewing and shall blink green every 76 Nos -
time the detector is addressed, and illuminate steady red on
alarm (True Ceiling)
109
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Supply, Installation, Testing, commissioning of Addressable
Isolator Module for Isolating short / dewired / loose circuits
with automatic resetting arrangement. Isolator Base can also
be proposed, however in that case needs to be considered
with each detector & module. The device shall have an LED
which shall blink in normal state & get steady on activation
550.0 to monitor the heath status of the device. Addressing shall be 20 Nos 0.00
with user friendly rotary decimal switches. Module shall be
supplied with mounting plate from OEM for ease of
installation & maintenance.
110
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Supply Installation Testing & Commissioning of Intelligent
16 Reader Controller, On-board Ethernet 10/100Base-T port,
200,000 cardholders in non-volatile flash memory, Battery-
backed, non-volatile storage of 50,000 events, Firmware
stored in flash memory, background download of firmware
updates supported, Supports up to 8 different formats,
Enhanced anti-passback capabilities, Up to 12 access level,
32 timezones, Up to 9-digit user PIN codes, status LEDs,
dedicated input for tamper, PoE power input 12.95 W,
564.0 compliant to IEEE 802.3af or 12 VDC, Operating Voltage: 7 Nos. 0.00
0° to 77°C, UL, CE, FCC ,RoHS certified, complete with
mounting bracket and all necessary accessories, civil,
electrical works & peripheral items, as required. Inclisive of
egress switch on cequired side
111
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Supply installation testing& commissioning of Attendance
management Sofware to support 10 Biometric readers, 02
concurrent clients, Attendance report, T&A Manager,Web
browser based software application, Web browser based
application, · Password protected with Super User, HR
Admin, Normal User login, Supports shifts , leaves ,
Holidays as per locations and mid night cross over of shifts,
Supports unlimited cardholders, Shift allocation employee
and department wise, defining periodic rotation pattern also
570.0 possible,Supports leave / weekly off / holiday definition 1 No 0.00
individual employee wise at different locations. Manual
updation of attendance / leaves / Out door duty possible.
Intgrated with Access supporting multiple sites, Multiple
operator login with 3 operator partitioning as Super User/HR
Admin/Normal User
112
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Supply, Installation, testing, Commissioning of Barcode
Long Range Imager scans, with 450 scans per second,
Trigger: 1,000,000 times, Durable -
581.0 2 Nos 0.00
without any moving parts to wear out, Plug and play
connectivity - USB / RS-232
CCTV SYSTEM
113
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Supply, Installation, Testing & Commissioning of 2MP IP
Network TDN Low-Light IR Rugged Bullet Camera, 1/2.8"
CMOS, 2 MP @ 50fps or better, triple stream, Min.
Illumination required 0.001 lux @ F1.6 (color), 140dB True
WDR with Scene Adaptive Control, Min. Pixels 1920 ×
1080, Shutter Speed 1/3 - 1,00,000; Adavance Video
Compression technology such as H.265 & H.264 High
Profile , Triple stream, 2.7–12 mm motorized focus & zoom
lens, BLC, HLC, 3DNR, Electronic Image Stabilization,
Minimum Edge Intelligence Video Analytics : Motion
Detection, Video Tampering, Face Detection, SD Card Error,
SD Card Capacity Warning, Audio Detection, Object
Abandoned, Object Missing, People Counting ; Heat Map
support, support license based edge uploadable advanced
analytics, support 3rd party open Video analytics framework,
Privacy Mask, 4 IR LEDs Smart IR with upto 50m IR
594.0 distance, AES-256, SSH/Telnet closed, PCI Data Security 10 Nos 0.00
Standard compliance, Hardware chipset for private key;
Dual channel Audio G.711a/ G.711Mu/ AAC/G.726, 128GB
SD card support, Alarm: 2 In/ 1out, Long Distance 3X PoE
support upto 300m (300m @100Mbps) , 10/1000 Base-T
Ethernet Port, PoE Class 4 (802.3 at) and 12V DC, support
aux. power supply of 2W ,12VDC for powering low power
devices such as strobe light/hooter/ aux. IR illuminator /etc.,
IP 67, IK 10 vandal proof, Die-Cast Aluminium Housing,
Having Operating temp range : –40°C to 60° C.
Certifications: ONVIF Profile S, G and Q compliant, UL,
CSA 60950-22, CE (EN 50130-4 & EN 55032) , FCC Part
15 & RoHS compliant.
114
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Supply Installation Testing & Commissioning of Network
Storage Manager(NSM) supporting ONVIF Profile S & G,
PSIA, real time streaming protocol (RTSP) standards,
emerging technologies in the industry, like 4K resolution,
H.265 video compression codec, 3D PTZ control, 360°
Fisheye camera and multi-imager/lens camera support, and
intelligence events. System proposed shall have 128 cameras
per NSM with sufficient licenses to record all the cameras in
this requirement. NSM shall support simultaneous recording,
live monitoring, playback/search of recorded video for up to
4K resolution on all cameras, taking snapshots and viewing
presets for PTZ cameras and system management. NSM shall
have integrated Dashboard to easily monitor the health and
recording status, Flexible retention time / archive time for
cameras, Smart Motion detection, Role-based operator
privileges supporting Windows and local users, Video
599.0 Archiving, Multi-stream support, Advanced security features 1 Nos 0.00
with encryption support for communication between desktop
client to NSM and secure https login for Web Client and
Mobile apps, Event history and operator log reporting with
export to PDF, Crystal Reports, MS Excel/MS Word. NSM
Shall support scheduled backfilling of the recordings from
the edge storage/SD card of cameras to the NSM using
ONVIF Profile G for robust recording against temporary
network failure, N+1/N+M recorder failover and failback
automatically or manually to have maximum system uptime
and recording continuity. , 2U Rackmount, Supports up to
128 channels, 2x Intel E5 2620 2.1GHz CPU, 8x 4GB
memory (upgradable to 1024), 1x12Gb/s SAS EXP ports,
4x1GbE LAN ports, 2x 10Gb SFP+, 2x(PSU+FAN Module),
12xHDD trays and 1xRackmount kit, RAID level supported :
RAID 0,1,5,6,10,50,60, scalable to 432 HDD, OS pre-
installed in RAID 1 OS mode with Windows 10 in dedicated
OS disk (separate from 12 Number of HDD slots), Storage
Supply Installation Testing & Commissioning server
machine of the specifications • Intel® Xeon® E5520,
2.26Ghz, 8M Cache, Turbo, HT, 1066MHz,4GB Memory
(2x2GB), 1066MHz Dual Ranked UDIMMs for 1 Processor,
Adv ECC , 24X IDE CD-RW/DVD ROM Drive , 160GB
7.2K RPM SATA 2.5" Hot Plug Hard Drive for Operating
System , 160GB 7.2K RPM SATA 2.5" Hot Plug Hard Drive
for Database,RD1000 Backup, Internal SATA Drive Bay for
600.0 1 Nos 0.00
2.5" Chassis ,RD1000 Internal Removable Hard Disk for
RD1000, 160GB Native/320GB Comp,Four 10/100/1000
Ethernet Network Ports Onboard VGA, 22 in. Flat LCD
Monitor, 1 serial port, 6 USB 2.0 ports, Speakers, USB
Keyboard, USB Optical Mouse, Surge Suppression Strip
Server Software• Microsoft Windows Server 2012 or 2016
Operating System• Microsoft SQL Server 2012 or 2016
Relational Database.
Supply, Installation, Testing & Comissioning of 32 ch NVR
with minimum 8 HDD slots supporting min. 8TB per slot
601.0 1 Nos 0.00
with RAID 5 feature. To obtain 180 days recording
(Currency Chest)
Supply, Installation, Testing & Comissioning of 8TB SATA
602.0 enterprise hard disc 8 Nos. 0.00
Supply, Installation, Testing & Comissioning of 10TB SATA
603.0 8 Nos. 0.00
enterprise hard disc
Supply, Installation, Testing, Commissioning of Heavy Duty
604.0 1 No. 0.00
32U rack
Supply, Installation, Testing, Commissioning of Heavy Duty
605.0 6 No 0.00
6U rack
Supply, Installation, Testing, Commissioning of Supply &
606.0 8,500 Mtrs 0.00
Laying of Armoured, Cat-6 cable
Supply, installation, testing and commissioning approved
make 25 mm dia.PVC flexible conduits on ceiling / wall /
607.0 100 Mtrs 0.00
floor etc. complete with accessories like, Junction boxes,
Collars, Bends etc.
Supply, Installation, Testing & Comissioning of Video
608.0 2 Nos 0.00
Management Client Software to view cameras
Supply, Installation, Testing & Comissioning of Full HD 22'
609.0 2 No 0.00
LED monitor
Supply, Installation, Testing & Comissioning of Full HD
610.0 4 Nos. 0.00
Commercial grade 43' LED TV
Supply, Installation of all required accessories like
611.0 connectors, nuts, bolts, screws, glands, ferruling, 1 Lot 0.00
termination, etc. for CCTV system
TOTAL FOR CLOSE CIRCUIT TELEVISION
SYSTEM
115
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Supply, Installation, Testing & Commissioning of - 6W wall
mount imported speaker with excellent speech & music
reproduction
- Max Power: 9W,Rated Power: 6Watts, Power Tapping:
613.0 6/3/1.5W 90 Nos. 0.00
- Effective frequency range(-10 dB) : 200 Hz to 15KHz
- SPL at rated power (1Khz at 1 m) 96 dB
- Opening Angle 1 KHz / 4 KHz (-6 dB): 150/70
116
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Supply, Installation, Testing & Commissioning of Remote
call station with interface unit is to be used for calling
purpose and other applications with following features:
619.0 - Connects to call station interface via CAT-5 cable 2 Nos 0.00
- Up to 1 km from digital public address optical network
- Built-in limiter
- 2 supervised control inputs
Supply, Installation, Testing & Commissioning of Digital
Public Address and Emergency Sound System Controller
complying to International standards of Emergency Sound
System (IEC 60849) with following features :
- Completely digital audio and control data transmission.
- Fibre connection for digital network and connection to
amplifiers and other interface.
- In-built Digital Message storage with min 2 gB capacity for
3 hrs of audio messages.
- PC based programmable inbuilt Web server."
- External Alarm Inputs /Programmable auto relay of pre
recorded messages/Alarm tones/messages
- Automatic Fault Diagnostic and reporting at central
location- From Mic Capsule in call station uptil amplifiers
- Freely programmable 200 level of priority/ around 50
Dirrent chime/alarm tones, freely programmable/modifiable
620.0 zone assignment and routing 1 Nos 0.00
- Upgradation requires no changes in control equipment,
- provision for more 248 zones from single controller
-
All Programmable through software.
- 2 x 16-character LCD
display and a rotary control to navigate through the menu.
117
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Supply, Installation, Testing & Commissioning of
Microcontroller based digital circuit MFD cum Magnetic
contact, Detects opening of doors, windows,removal of
grills, Detects cutting of metal grills/ aluminum frames
632.0 vibration, breaking of glass, Advanced detection logic 10 Nos 0.00
algorithmMultiple detection criteria Alarm, Detection and
Power LEDs, High-low sensitivity jumper
118
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
E SEALENT WORKS
FM – Approved Fire Stop Mortar Seal(2 hrs. fire rating)
CBRI Test Report – UL:1479, BS:476 (Part 20), IS:12458
670.0 FM Report - Standard Test Method: ASTM E814 50 Sq.mtr. 0.00
119
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
10 Lb Novec 1230/ FK5-1-12, DLP Assembly with automatic valve
mounted on DOT approved cylinder, push in connector for tube,
672.0 10lb Novec 1230/ FK5-1-12 gas, mounting bracket, End of Line 10 No. 0.00
adopter and low pressure switch for monitoring system activation.
673.0 Linear pneumatic heat Detection Tube with all necessary 174 MTR 0.00
Master Control Unit for controlling each system, complete with
pressure switches, buzzers and electronic hooters, including all
674.0 necessary accessories + electrical wiring to make each entire system 11 Nos 0.00
functional.
TOTAL SECTION - ' F ' 0.00
TOTAL OF LOW VOLTAGE WORK
120
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
121
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
122
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
123
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Installation, Testing & Commissioning of Floor standing
duct type / floor standing direct type Unit having
efficient cooling unit and with full function corded
remote control. VRF based type units. a)Centrifugal
686.0
fans, b)Coil section, c)Filter section, d)Insulated drain
pan as detailed in specification. With In Build Drain
Pump Kit
686.2
Installation, Testing & Commissioning of Remote
control.
Cordled remote control for cabins/ closed area 60 Nos. 0.00
Installation, Testing & Commissioning of Refnets for
686.4 110 Nos. 0.00
connection between outdoor to Indoor .
Installation, Testing & Commissioning of Touch Screen
Controller With Suitable BMS Compatible for VRV
687.5 2 Nos. 0.00
system for all the indoor & outdoor units installed
suitable place.
124
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
Supply / Installation / Testing / Commissioning of
FACTORY / SITE FABRICATED rectangular sheet
metal ducts, as per specifications detailed in tender,
made of Class VIII GP sheet as per SMACNA Standard
for medium pressure air flow with MS angle / TDF
flanges, supports, anchor fasteners, food grade gaskets
and RTV sealant in accordance with the approved shop
drawings. it is mandotary to use factory fabricated ducts
for minimum 85% of the ducting system. Use of Site
fabricated ducts should be restricted to only 'to suit'
pieces.Cold rolled sheets continuous galvanized sheet
steel with zinc coating as per class VIII confirming to
IS:277-1962 (revised)(where ever specified) of LFQ
694.0 (Lock Forming Quality) grade. Galvanizing shall be of
120gms/sq. m (Total coating on both sides) The
fabrication of the ducting system for air-conditioning &
Ventilation shall confirm to SMACNA-1995 standards
("HVAC Duct Construction Standards - Metal and
Flexible - Second Edition - 1995"-SMACNA).Ducts of
following Guage/thickness with Flanges, G.I. Sheet
Metal Duct (Rectangular OR Round)
125
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
126
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
127
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
128
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
129
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
130
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
SECTION - B
731.0 SIAMESE INLET & BREACH CONNECTIONS
SECTION - C
732.0 FIRE PUMPS AND ACCESSORIES
131
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
SECTION - D
SPRINKLER INSTALLATION
Providing and fixing IS:1239 G.I 'C' Class pipes with
screwed - or welded joints with specials as necessary
clamped to wall, beams or ceilings as per specifications
738.0 with approved anchor fastners; MS brackets testing to
13.5 Kg/Sq.cm hydraulic pressure after installation, and
painting two coats of enamel paint of approved colour
over two coats of primer.
738.1 25 mm dia. -do - - do - - do - 910 Rmt 0.00
738.2 32 mm dia. -do - - do - - do - 278 Rmt 0.00
738.3 40 mm dia. -do - - do - - do - 144 Rmt 0.00
738.4 50 mm dia. -do - - do - serewed / Welding joints 167 Rmt 0.00
738.5 65 mm dia. -do - - do - - do - 133 Rmt 0.00
738.6 80 mm dia. -do - - do - - do - 173 Rmt 0.00
738.7 100 mm dia. -do - - do - - do - 86 Rmt 0.00
738.8 150 mm dia. -do - - do - welded joints 146 Rmt 0.00
132
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
133
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
134
Sr.No. ITEM NO DESCRIPTION QTY UNIT RATE AMOUNT
F SAFETY SIGNAGES
Emergency Exit
Size 6" X 16" 9 Nos 0.00
135