Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

6MR300SEALv2

Professional Midrange Driver

KEY FEATURES

• 1.5” Voice coil


• 150 Watts continuous power handling
• 96 dB Sensitivity
• Sealed stamped steel frame, no enclousure required

Nominal Diameter 6” (152.4 mm)


Nominal impedance 8 ohms
GENERAL SPECIFICATIONS

Rated Power Handling 150 Watts


Program Power 300 Watts
Sensitivity 2.83V at 1m 96 dB
Recommended Hi Pass Crossover* 400 Hz*
*For Full Power Handling *12db Per Octave Crossover

Frequency Response at -10dB 400 - 7,500 Hz


Voice Coil Diameter 1.5” (38.1 mm)
Voice Coil Wire Copper
Voice Coil Winding Depth 11.5 mm
6MR300SEALv2
Former Material Kapton 8 ohms

150 Watts RMS


Magnetic Gap Depth 5.0 mm 300 Watts Program Power
600 Watts Peak

Frame Material Stamped Steel www.prvaudio.com

Equivalent Volume Vas 0.33 l


THIELE-SMALL PARAMETERS

6.57"(167mm)
Excursion (mathematical)*** Xmax 4.50 mm
Free Air Resonance Fs 390.6 Hz
Mechanical Factor Qms 10.97

3.26"(83mm)
2.99"(76mm)

Electrical Factor Qes 2.97


Total Factor Qts 2.34
Cone Area Sd 143 cm²
Mechanical Mass Mms 13.97 g 4.72"(120mm)
Bl Factor Bl 8.65 Tm 5.82" (148mm)
Dc Resistance Re 6.5 Ohms Frequency Response Measured at 2.83V/1m
110

Inductance Le 0.34 mH at 1 kHz


dBSPL
Mechanical Mass Without Air Mmd 13.06 g 100
Mechanical Compliance Cms 0.012 mm/N
90

Overal Diameter 6.57” (167 mm)


EXTRA INFO

Front Mount Baffle Cutout 5.82” (148 mm) 80

Mounting Depth 2.99” (76 mm)


Overall Depth 3.26” (83 mm) 70

Net Weight 4.73 Lbs (2.14 kg)


Shipping Weight 4.85 Lbs (2.20 kg) 60
100 200 500 1k 2k 5k 10k Hz 20k

Carton Dimensions W x L x H 7.0” x 7.0” x 4.0” PRV AUDIO USA (USA and Export) PRV AUDIO BRAZIL (Brazilian Sales Only)
FORT LAUDERDALE, FL SAO LEOPOLDO, RS
(177 x 177 x 104 mm) support@prvaudio.com vendas@pvaudio.com.br
***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4 www.prvaudio.com www.pvaudio.com.br
PRV Audio strives to manufacture the best drivers in the Professional Loudspeaker industry. Specifications are subject to change due to continuous product improvement - Rev: 08/18

You might also like