Professional Documents
Culture Documents
Fluidized Bed Freezer Quotation (MELI
Fluidized Bed Freezer Quotation (MELI
Fluidized Bed Freezer Quotation (MELI
, LTD
Add: Xindi East Road, Tongzhou Zone, Nantong City, 226371, P.R.CHINA
Cell: 0086-18061816695 Fax: 0513-86562217
Web: www.icefreezing.com E-mail: nticesource@163.com
Fluidized bed freezer is best machine to realize fruit, vegetable and some seafood fluidization monomer,
frozen goods move in the transmission belt, with increase of air velocity, the food layer begins to lose;
When wind pressure reaches a certain value, food particles remain stationary state, no longer suspension
part particles upward, bed expansion, void fraction increases and format fluidized bed; Fluidized bed body
at this time is the strong cold wind blowing at the bottom of the food in the suspended state, frozen goods
by air cooling flow around in all directions, to achieve rapid freezing of food after the formation of
monomer, fast frozen food by cooling, surface freezing, deep freezing three phases, in order to gain the
highest quality of frozen food.
The products are widely used in vegetables, fruits, fungi and granular, sheet, block of quick frozen food.
Product features
* Compact structure, cover a small area.
* Big freeze capacity, give full play to the characteristics of the spiral drum structure.
* Using precision machined part, to ensure that the overall performance of the equipment.
* Belt is made from high strength material, improve the service life and stability of the equipment.
1
NANTONG ICESOURCE FREEZING EQUIPMENT CO., LTD
Add: Xindi East Road, Tongzhou Zone, Nantong City, 226371, P.R.CHINA
Cell: 0086-18061816695 Fax: 0513-86562217
Web: www.icefreezing.com E-mail: nticesource@163.com
1. Insulation Library
The insulated storage body is a double-sided stainless steel high-density polyurethane insulation
board, and the bottom plate of the library is an integrally welded stainless steel water tank. The internal
polyurethane is high-pressure foaming machine for high-pressure filling foaming. The filling capacity is
≥42kg/m3, and the thickness of the plate is S=120mm. All the seam joints are sealed with special glue
when the whole assembly is assembled, which avoids the cold running of the equipment library.
phenomenon.
Reasonable maintenance access door for the maintenance and maintenance is designed to prevent the
adhesion of the protective door seal during use. The electric heating device with a safe voltage is designed
around the door frame, and the inside of the door is anti-lock. safety equipment.
Stainless steel elevated frame will be placed underneath the cooler as an air barrier between cooler and
concrete floor. The investment on cold-resistant foundation can be saved with base frame.
2. Evaporator
2.1. All stainless steel frame, aluminum tube aluminum fin structure.
2.2. The fin with its own air floccules structure, the tube shape is high-flanged, and the plum-shaped
arrangement of the tube hole makes the evaporation efficiency better and the cleaning is more convenient
and quick.
2.3. The advanced expansion process is adopted to make the flange and the evaporation tube tightly
combined, and the heat transfer speed is faster.
2.4. The advanced liquid supply method of side supply side return is adopted, and the liquid supply is
throttled. The liquid supply is more uniform, the liquid extraction and water defrosting are more rapid, the
heat exchange efficiency is high, and the cooling rate is fast.
2
NANTONG ICESOURCE FREEZING EQUIPMENT CO., LTD
Add: Xindi East Road, Tongzhou Zone, Nantong City, 226371, P.R.CHINA
Cell: 0086-18061816695 Fax: 0513-86562217
Web: www.icefreezing.com E-mail: nticesource@163.com
2.5. The evaporator is factory tested for 24kg/cm3, and the nitrogen is kept for 24 hours.
2.6. The ventilation system uses a centrifugal fan to fully seal the low temperature moisture-proof and
water proof motor. It has high efficiency, energy saving, low noise and stable operation. The fan blades are
aluminum alloy impellers and all stainless steel air cylinders. The wind is sent back smoothly, and the wind
speed required for quick freezing is achieved with a small fan power.
2.7. The diameter of the evaporation tube is φ25×2.2, the thickness of the fin is 0.40mm, and the double
flange is used. The height of the flange is up to 10mm. The thick fins simultaneously improve the cold and
heat exchange path and press into the regular concave and convex pattern, which greatly improves the
strength of the fin. Lodging. The evaporation tube is densely packed.
3. Belt
Mesh belt adopts precision food grade polyethylene conveyor
chain, the end is fixed by fusion welding, unique inner shrinkable
belt. High-strength stainless steel struts, free-disconnecting
connection structure. The surface is flat and beautiful, and has a
long service life.
6. Air Flow
Horizontal air flow ensures higher density of products, more efficient heat transfer while lower energy
consumption.
Annular air flow duct: Best air flow and guarantees even product temperature.
Balanced air pressure inside structure, less cold loss at outlet end.
4
NANTONG ICESOURCE FREEZING EQUIPMENT CO., LTD
Add: Xindi East Road, Tongzhou Zone, Nantong City, 226371, P.R.CHINA
Cell: 0086-18061816695 Fax: 0513-86562217
Web: www.icefreezing.com E-mail: nticesource@163.com
Technology Parameter
No. Item Data
1. Model FBF-1500
2. Production Fried Plantains
3. Capacity 1500kg/h
4. Overall Dimension 10000*4300*4250mm
5. Belt Length 26m
6. Belt Width 1200mm
7. Production Layer 1
8. Inlet Length 1500mm
9. Outlet Length 500mm
10. Inlet/Outlet Mode Low Inlet And Low Outlet
11. Freezing Time 8-40 min
12. Freezing Temperature -38°C
13. Inlet Temperature +15°C
14. Outlet Temperature -18°C
15. Cold Consumption 240kw
16. Working Condition -45°C /+38°C
17. Refrigeration R717
18. Install Power 58kw
19. Insulation Library 120mm, 43kg/m³
Part configuration
Production Layer 1
Product
Inlet Length/Height 1500mm
Description
Outlet Length/Height 500mm
6
NANTONG ICESOURCE FREEZING EQUIPMENT CO., LTD
Add: Xindi East Road, Tongzhou Zone, Nantong City, 226371, P.R.CHINA
Cell: 0086-18061816695 Fax: 0513-86562217
Web: www.icefreezing.com E-mail: nticesource@163.com
Electric Control Box SUS304 material
PLC centralized control system, man-machine
Control System interface, touch screen control,
Chinese/English display
Electrical
Electrical Component Brand Schneider Electric
Control
Protective Device Belt is too long, too short protection
System
Prevent tumbling protection
Product/Specification/Quantity/Price
Remark:
1. Delivery Terms: FOB SHANGHAI, 45 working days from receipt of deposit;
2. Payment Terms: T/T, 30% deposit, the rest 70% before dispatch;
3. Installation: Seller can send engineers to customer’s site upon request to install and commission
equipment; Buyer shall bear engineers’ visa, return flight tickets, local accommodation, transportation,
communications costs and personnel safety in customer’s side; Daily rates for labor service charge of
installation and commissioning is 100USD/engineer/day;
7
NANTONG ICESOURCE FREEZING EQUIPMENT CO., LTD
Add: Xindi East Road, Tongzhou Zone, Nantong City, 226371, P.R.CHINA
Cell: 0086-18061816695 Fax: 0513-86562217
Web: www.icefreezing.com E-mail: nticesource@163.com
4. Warranty: 12 months warranty after installation and debugging, during warranty period seller is
responsible for product warranty and repair parts; In the case of human factors caused by the loss of
human failure, the resulting costs borne by buyer, seller of equipment to provide life-long tracking
service (remote technical support by telephone or email, if need on-site service, the cost is paid by
buyer).