Professional Documents
Culture Documents
Everpure+Pentek+Sterilight - Water Filter & UV System
Everpure+Pentek+Sterilight - Water Filter & UV System
BENEFITS
Mounts directly onto flat surface Change cartridges on a regular 6 month For foodservice, vending and OCS applications
preventative maintenance program
Install vertically so cartridge hangs down Capacity: varies according to filter cartridge used
Change cartridges when capacity is reached or
Allow 2-1/2” clearance below the cartridge for when pressure decreases
easy cartridge replacement
Always flush the filter cartridge at time of
Flush filter by running water through filter installation and cartridge change
according to cartridge instructions
QL1 Single Head
#10 Clear
Slim Line® filter housings are chemical compatibility are Manufactured of clear Styrene-
available in either reinforced primary concerns. Acrylonitrile (SAN), the sumps are
polypropylene or clear Styrene- annealed to relieve stress, adding
Acrylonitrile (SAN) in 5", 10" Opaque Slim Line® Filter Housings clarity and strength.
and 20" lengths. The black or blue Molded from rugged reinforced
reinforced polypropylene housing polypropylene, Opaque Slim Line®
caps are available with 1/4", 3/8" filter housings offer outstanding
or 1/2" NPT connections. Four chemical compatibility and are ideal
bosses are molded into every cap for for use in a variety of low-flow
mounting purposes. applications. These applications
include under-sink and countertop
They are equipped with a black, residential filtration, pre- and
reinforced polypropylene cap and post-reverse osmosis filtration,
offer an optional pressure-relief recreational vehicle filtration, food
button on the inlet side to relieve service and humidifying systems.
pressure inside the housing when
changing filter cartridges. Clear Slim Line® Filter Housings
offer on-site examination of flow,
Slim Line® filter housings are performance, and cartridge life.
an excellent choice for low-flow They are also ideal for a variety
applications and when space and of applications.
Slim Line®
Filter Housings
OF
- J
"QQSPYJNBUF/FU1SFTTVSF%SPQoQTJ #BS
MJN
4
F
JO
-
MJN
4
The 158005, 158006, 158114, 158115, 158120, 158125,
158126, 158128, 158129, 158131,158149, 158195,
158196, 158204, and 158205 are Tested and Certified by
NSF International to NSF/ANSI Standard 42 for material
and structural integrity requirements.
'MPX3BUFoHQN -QN
#5 Clear 73⁄8" x 45⁄8" (187 mm x 118 mm) 1/4" NPT–2 psi @ 3 gpm (0.14 bar @ 11 Lpm)
#10 Clear 121⁄8" x 45⁄8" (308 mm x 118 mm) 3/8" NPT–2 psi @ 5 gpm (0.14 bar @ 19 Lpm)
#5 Opaque 7" x 4 ⁄8" (178 mm x 111 mm)
3
1/4" NPT–2 psi @ 3 gpm (0.14 bar @ 11 Lpm)
#10 Opaque 113⁄4" x 43⁄8" (299 mm x 111 mm) 1/2" NPT–2 psi @ 5 gpm (0.14 bar @ 19 Lpm)
#20 Opaque 21 ⁄8" x 4 ⁄8" (556 mm x 111 mm)
7 3
1/2" NPT–2 psi @ 5 gpm (0.14 bar @ 19 Lpm)
Materials of Construction
Housing SAN (Clear) or Polypropylene (Opaque)
Cap Reinforced Polypropylene
Button Assembly 300-series Stainless Steel, EPDM, and Polypropylene
O-Ring Buna-N
Maximum Temperature 125ºF (51.7ºC)
Maximum Pressure 125 psi (8.62 bar)
CAUTION: Protect against freezing to prevent cracking of the filter and water leakage.
$
14
"QQSPYJNBUF/FU1SFTTVSF%SPQoQTJ #BS
14$
14$
'MPX3BUFoHQN -QN
PS1-10C 23⁄8" x 93⁄4" (60 mm x 248 mm) 1 2.9 psi @ 5 gpm (0.2 bar @ 18.9 Lpm)
PS5-10C 23⁄8" x 93⁄4" (60 mm x 248 mm) 5 1.0 psi @ 5 gpm (<0.1 bar @ 18.9 Lpm)
PS20-10C 23⁄8" x 93⁄4" (60 mm x 248 mm) 20 0.7 psi @ 5 gpm (<0.1 bar @ 18.9 Lpm)
PS1-20C 23⁄8" x 20" (60 mm x 508 mm) 1 1.45 psi @ 5 gpm (<0.1 bar @ 18.9 Lpm)
PS5-20C 23⁄8" x 20" (60 mm x 508 mm) 5 0.5 psi @ 5 gpm (<0.1 bar @ 18.9 Lpm)
PS20-20C 23⁄8" x 20" (60 mm x 508 mm) 20 0.35 psi @ 5 gpm (<0.1 bar @ 18.9 Lpm)
PS1-30C 23⁄8" x 30" (60 mm x 762 mm) 1 0.97 psi @ 5 gpm (<0.1 bar @ 18.9 Lpm)
PS5-30C 23⁄8" x 30" (60 mm x 762 mm) 5 0.33 psi @ 5 gpm (<0.1 bar @ 18.9 Lpm)
PS20-30C 23⁄8" x 30" (60 mm x 762 mm) 20 0.23 psi @ 5 gpm (<0.1 bar @ 18.9 Lpm)
PS1-40C 23⁄8" x 40" (60 mm x 1016 mm) 1 0.73 psi @ 5 gpm (<0.1 bar @ 18.9 Lpm)
PS5-40C 23⁄8" x 40" (60 mm x 1016 mm) 5 0.25 psi @ 5 gpm (<0.1 bar @ 18.9 Lpm)
PS20-40C 23⁄8" x 40" (60 mm x 1016 mm) 20 0.18 psi @ 5 gpm (<0.1 bar @ 18.9 Lpm)
Materials of Construction
Fiber Media Polypropylene Fibers
Temperature Rating 40–145ºF (4.4–62.8ºC)
WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection
before or after the system.
B ENEFI TS
Never use saddle valve for connection Change cartridges on a regular 6 month Ideal for problem water areas
preventative maintenance program
Use 3/8” water line For foodservice, vending machine and office
Change cartridges when capacity is reached or coffee service applications
Install vertically with cartridge hanging down when pressure falls below 10 psi
Rated Capacity: 3,000 gallons (11,355 L)
Allow 2-1/2” clearance below the cartridge for Service flow rate must not exceed 1.0 gpm
easy cartridge replacement
Always flush the filter cartridge at time of
Flush 2CB5-K cartridge by running water installation and cartridge change
through filter for 5 minutes at full flow
2CB 5-K Replacement Cartridge
Pressure Requirements:
10 - 125 psi (0.7 – 8.6 bar), non-shock
Maximum Temperature:
35 - 100°F (2 - 38°C)
B ENEFI TS
Install vertically with cartridge hanging down Change cartridges on a regular 6 month For ice applications
preventative maintenance program
Allow 2-1/2” clearance below the cartridge for Special problem solving cartridge
easy cartridge replacement Change cartridges when capacity is reached or
when pressure falls below 10 psi Rated Capacity: 10,000 gallons (37,854L)
Flush cartridge by running water through system
for five minutes at full flow Always flush the filter cartridge at time of
installation and cartridge change
7CB 5-K Filter Cartridge
Pressure Requirements:
10 - 125 psi (0.7 – 8.6 bar), non-shock
The contaminants or other substances Everpure water treatment systems (excluding replaceable elements)
are covered by a limited warranty against defects in material and
removed or reduced by this drinking water workmanship for a period of five years after date of purchase.
Everpure replaceable elements (filter cartridges and water treatment
system are not necessarily in your water. Do cartridges) are covered by a limited warranty against defects in
not use with water that is microbiologically material and workmanship for a period of one year after date of
purchase. See printed warranty for details. Everpure will provide a
unsafe or of unknown quality without copy of the warranty upon request.
adequate disinfection before or after the
system.