Professional Documents
Culture Documents
OSP078 IC DAS 8009 Rev.0 Pressure Differential Indicator Datasheet
OSP078 IC DAS 8009 Rev.0 Pressure Differential Indicator Datasheet
Page 2 of 4
Changes List
Date
Rev. prepared Prepared by Description
(DD-MM-YYYY)
Onspec Tawakol Engineering and Contracting
Engineering Works for Utilizing Secondary Gas in High Pressure Mode
Pressure Differential Indicator Datasheet
Page 3 of 4
Index
Sheet Description
1 Cover Page
2 Change List
3 Index
4 01-PDI-60 Datasheet
Onspec Tawakol Engineering and Contracting
Engineering Works for Utilizing Secondary Gas in High Pressure Mode
Pressure Differential Indicator Datasheet
Page 4 OF 4
Pressure Differential Indicator Datasheet
01-GD-P-04015-2
Housing
General
3 P&ID No. / Skid No. 28 Process Connection Size ½" NPT (M)
SHEET 2 OF 2
4 Vessel No \ Line No. Across Shutdown Valve (SDV-09) 29 Process Connection Entry Bottom
8 Process Fluid Gas 33 Valve Manifold 5 way Manifold Integral with Indicator
9 Inlet Pressure / Outlet Pressure (barg) 60/Atm 34 Valve Manifold Connection ½" NPT (F)
Manifold
10 Design Pressure (barg) 79 35 Manifold Material 316 SS, ENP ( Note.13 )
Process Data
11 Differential Pressure (bar) 0-60 36 Manifold Vent / Drain Connection ¼" NPT (F)
12 Operating Temperature ° C 40 37 Manifold Isolation Handle Removal Type with tag Isolate & Vent
Ambient Conditions
Notes:
3) Vendor to provide complete fittings, mounting brackets sets, etc. necessary to Pressure differential Indicator installation
4) Pressure Differential Indicator shall have SS tag tied with SS wire or on the body of Pressure Differential Indicator
5) Vendor to provide spare parts required for pre-commissioning, commissioning and startup (If any)
7) Wetted parts material of tubing or any other accessories needed for each instrument shall be same as wetted parts material off the instrument.
8) Pressure Differential Indicator scale range shall be selected such that the normal pressure shall be indicated within 30 - 70% of the full range