Professional Documents
Culture Documents
Harduaganj Thermal Power Station Extension-II (1x660 MW) : Epc Package
Harduaganj Thermal Power Station Extension-II (1x660 MW) : Epc Package
EPC PACKAGE
UTTAR PRADESH RAJYA VIDYUT UTPADAN
OWNER NIGAM LIMITED,
Lucknow, Uttar Pradesh
ARCHITECT ENGINEER
R3 5.11.2018 GTP for 11/0.433 kV, 800kVA Oil Type transformer Kalyani Raamesh Sreesan
R2 10.09.2018 GTP for 11/0.433 kV, 800kVA Oil Type transformer Kalyani Raamesh Sreesan
R1 05.02.2018 GTP for 11/0.433 kV, 800kVA Oil Type transformer Raamesh
Pradeep Sreesan
R0 25.07.2017 GTP for 11/0.433 kV, 800kVA Oil Type transformer Raamesh Pradeep Sreesan
1.00.00 General
1.01.00 Make TTDI
1.02.00 Type Outdoor;ONAN
1.03.00 Reference Standard IS 1180(PART 1)-2014
2.00.00 Rating
2.01.00 Rated output kVA 800
2.02.00 Type of cooling ONAN
2.03.00 Rated voltage Volt
H.V 11000
L.V 433
2.04.00 Rated Current Amps
H.V 41.989 Line current
L.V 1066.698
2.05.00 No. of phases 3
2.06.00 Rated Frequency Hz 50
2.07.00 Vector group reference Dyn1
3.00.00 Temperature
3.01.00 Reference ambient temp. 50 deg C Deg. C 50
3.02.00 Temp. rise over reference ambient
a. On enclosure by thermometer Deg. C 40 Oil by Thermometer
b. In winding by Resistance Deg. C 45
4.00.00 Tappings
4.01.00 Type OCTC
4.02.00 Capacity 11kV, 50A
-5% to +5% in steps of
4.03.00 Taps provided on HV winding 2.5%
5.00.00 Insulation level kV/kVp
5.01.00 H.V 28/75
5.02.00 L.V 3/--
5.03.00 L.V Neutral 3/--
Impedance at principal tap
6.00.00 rated current & frequency %
6.01.00 Impedance 5 IS tolerance applicable
6.02.00 Reactance 4.95 Approx
6.03.00 Resistance at 75 Deg. C
a) H.V Winding 1.338 Approx
b) L.V Winding 0.00072 Approx
80% to 110% of Positive
6.04.00 Zero sequence impedance :
sequence Impedance
Zero sequence capacitance of H.V
6.05.00 winding
pf/ph 1681 Normal capacitance :LV-HV
Guaranteed losses at Principal
7.00.00 tap, full load and 75 deg.
7.01.00 No load losses Watts 917 Maximum
7.02.00 Load losses Watts 5480 Maximum
Efficiency at 75 deg. C and 0.8
8.00.00 power factor lag %
8.01.00 At full load 99.01
8.02.00 At ¾ full load 99.17
8.03.00 At ½ full load 99.29
8.04.00 Maximum efficiency 99.44
8.05.00 Load and power factor at which it occurs 0.41 Load factor & UPF
9.00.00 Regulation at full load and 75 deg.C
%
9.01.00 At unity power factor 0.81
9.02.00 At 0.8 power factor lagging : 3.58
10.00.00 No load current referred to HV Amps
10.01.00 At 90% rated voltage 0.63
10.02.00 At 100% rated voltage 0.84
ALL INFORMATION CONTAINED IN THIS DOCUMENT IS CONFIDENTIAL AND THE PROPERTY OF TOSHIBA TRANSMISSION DISTRIBUTION SYSTEMS (INDIA) PVT. LTD., REPRODUCTION OF
THIS IN ANY FORM IS TO BE DONE WITH THE SPECIFIC PERMISSION OF THE ORGANIZATION”
S. No. Description Unit Bidder Detail Remarks
10.03.00 At 110% rated voltage 2.1
11.00.00 Maximum current density Amps/sq.mm
11.01.00 At 90% rated voltage 3
11.02.00 At 100% rated voltage 3
11.03.00 At 110% rated voltage 3
12.00.00 Maximum current density Amps/sq.mm
12.01.00 H.V Winding 3
12.02.00 L.V Winding 3
13.00.00 Withstand time without injury forSec.
Three phase dead short-circuit at
Terminal with rated voltage 3 Seconds(Thermal)
13.01.00 maintained on other side
Single phase short circuit at
terminal with rated voltage 3 Seconds(Thermal)
13.02.00 maintained on other side
ALL INFORMATION CONTAINED IN THIS DOCUMENT IS CONFIDENTIAL AND THE PROPERTY OF TOSHIBA TRANSMISSION DISTRIBUTION SYSTEMS (INDIA) PVT. LTD., REPRODUCTION OF
THIS IN ANY FORM IS TO BE DONE WITH THE SPECIFIC PERMISSION OF THE ORGANIZATION”
S. No. Description Unit Bidder Detail Remarks
Core bolts are not
applicable.Core
insulation test will be
performed for 1 min.
22.02.00 Core bolt withstand voltage for 1 min.
23.00.00 Details of the tank
23.01.00 Type of tank Rectangular
23.02.00 Material Mild steel
Nominal thickness as per
5
23.03.00 Thickness of sides mm IS:1852
Nominal thickness as per
6
23.04.00 Thickness of bottom mm IS:1852
Nominal thickness as per
6
23.05.00 Thickness of cover mm IS:1852
Stainless steel for size
M12 & below and Hot
dip galvanized for size
above M12 size
23.06.00 Material of Nut & Bolt
24.00.00 Details of insulating oil
24.01.00 Approx. volume litres 1070
24.02.00 10% excess oil furnished Yes/No Yes
24.03.00 Oil conforms to Latest version of IS:335
24.04.00 Oil preservation system provided Yes,conservator provided
25.00.00 Details of wiring
25.01.00 Cable type PVC
25.02.00 Voltage grade V 1100
25.03.00 Conductor size Sq.mm 1.5 Minimum
Details of Trip & Alarm Contact
26.00.00 Ratings of OTI and WTI
26.01.00 Voltage Volt DC/AC V 220V DC / 250V AC
26.02.00 Rated/Making Current A 0.5 / 5.0 WTICT ratio 1067/2 A
27.00.00 Details of Conservator
27.01.00 Volume of Conservator litres 100 Approx total volume
Volume of oil between the highest
27.02.00 & lowest levels litres 80 Approx
Details of Approximate Overall
28.00.00 Dimension
28.01.00 Length mm 2285
28.02.00 Breadth mm 2750
28.03.00 Height mm 2365
Crane lift for un tanking core and
28.04.00 core assembly (including slings) mm 5200
29.00.00 Details of Approximate Weights
29.01.00 Core and coil kg 1875 Core & Coil assembly
29.02.00 Tank & fittings kg 1920
29.03.00 Oil kg 870
29.03.01 Oil L 1070
29.04.00 Total weight kg 4665
30.00.00 Details of Shipping Data
30.01.00 Weight of the heaviest package kg 4050
Dimension of the largest package 2300 x 2060 x 2250
30.02.00 (LxBxH) mm
30.03.00 Thickness of the radiator mm 1
31.00.00 Details of Radiators
31.01.00 Nos.of Radiatos No. 4
31.02.00 Nos.of fins per radiator No. 7
31.03.00 size of fin mm 520W x 900H
58 dB
32.00.00 Noise level (As per NEMA TR1)
NOTE :
1. All weights and Dimensions are subject to ±10% tolerance.
2. All the efficiencies and regulations are calculated at the nominal values of NLL, LL & %Z @ 75C.
3. Neutral CT ratio :1250/1-1A
Date: Prepared: Checked: Approved:
ALL INFORMATION CONTAINED IN THIS DOCUMENT IS CONFIDENTIAL AND THE PROPERTY OF TOSHIBA TRANSMISSION DISTRIBUTION SYSTEMS (INDIA) PVT. LTD., REPRODUCTION OF
THIS IN ANY FORM IS TO BE DONE WITH THE SPECIFIC PERMISSION OF THE ORGANIZATION”