Professional Documents
Culture Documents
Introduction To Manufacturing Processes & Applications MCQs Part 2 - ToolsandJobs
Introduction To Manufacturing Processes & Applications MCQs Part 2 - ToolsandJobs
Introduction To Manufacturing Processes & Applications MCQs Part 2 - ToolsandJobs
Ans. D
2.Size of casting is 10×15×20 cm, if the shrinkage allowance is 2% then size of pattern is
A. 100×150×200 mm
B. 102×153×204 mm
C. 98×147×196 mm
D. None of these
Ans. B
3.Size of casting is 50×70×90 cm, if the machining allowance is 3% per dimension and if the shrinkage allowance is 7% then size
of pattern is
A. 550×770×990 mm
B. 505×707×909 mm
C. 495×693×891 mm
D. 551×771.5×992 mm
Ans. B
Ans. B
5.Material utilization is better in
A. Open die forging
B. Closed die forging
C. Both a and b
D. Can‟t say
Ans. A
Ans. A
Ans. A
8.Forging is related to
A. Malleability
B. Hardness
C. Ductility
D. Toughness
Ans. A
Ans. B
Ans. A
Ans. D
Ans. D
Ans D
14.Surface finish is good in
A. Hot working
B. Cold working
C. Both
D. Can‟t say
Ans. B
Ans. A
Ans. A
Ans. A
18.Handling is difficult in
A. Hot working
B. Cold working
C. Both
D. Can‟t say
Ans. A
Ans. A
Ans. A
Ans. A
Ans. B
Ans. A
Ans. B
Ans. A
Ans. A
Ans. B
Ans. B
Ans. A
Ans. D
ToolsPlusJobs
This website is made for helping students to get their dream jobs as well as helps in finding online free courses with learning objective
FREE SERVICES
Jobs
Prep. MCQ's
Free learning
USEFUL LINKS
About us
USEFUL WEBSITES
DrushyaIndia
SpaceInHindi
Web Development
CONTACT
Contact us
toolsplusjobs@gmail.com
Find us on: -