Professional Documents
Culture Documents
Nammthya 000002
Nammthya 000002
HIGHLIGHTS
Pages which have been revised are outlined below, together with the Highlights of the
Revision
--------------------------------------------------------------------------------------
CH/SE/SU C REASON FOR CHANGE EFFECTIVITY
PAGES
--------------------------------------------------------------------------------------
CHAPTER 00
__________
00-HIGHLIGHTS Page 1 of 1
REVISION NO. 06 Nov 01/06
THY
CHAPTER 00
__________
INTRODUCTION
00-L.E.P. Page 1
Nov 01/06
THY
CHAPTER 00
__________
INTRODUCTION
TABLE OF CONTENTS
_________________
_______
SUBJECT ________
CH/SE/SU C
_ PAGE ___________
____ EFFECTIVITY
INTRODUCTION
____________ 00-00-00
DESCRIPTION AND OPERATION 1 ALL
General 1 ALL
Correspondence 1 ALL
Manual Breakdown 2 ALL
Chapter Breakdown Policy 3 ALL
Page Block Assignment 4 ALL
General arrangement and how to use 10 ALL
the manual
Manual structure 10 ALL
Description and Operation (D/O) 11 ALL
Structure (Pages 1 to 99)
Maintenance Procedure (MP) 12 ALL
Structure
AMTOSS (Aircraft Maintenance Task 17 ALL
Oriented Support System)
Task/Subtask Numbering
General 17 ALL
Text breakdown 17 ALL
AMTOSS Function Code 20 ALL
How to find a referenced AMM 23 ALL
Task in the manual
Statement of Effectivity in the 26 ALL
Text
General 26 ALL
Service Bulletin and Customer 26 ALL
Originated Change
Service Bulletin (SB) 26 ALL
Incorporation
Customer Originated Changes 26 ALL
(COC)
Special Procedure and Standard 28 ALL
Maintenance Practices
Definition of terms 29 ALL
Aircraft status for maintenance 29 ALL
Replacement of Equipment 29 ALL
Functional Item Numbers (FIN) 30 ALL
Units of Measurement 30 ALL
Abbreviation 30 ALL
Conversion tables 31 ALL
Symbols 33 ALL
Glossary of Abbreviations used in 33 ALL
the AMM
Revision Service 72 ALL
General 72 ALL
Filing instructions 72 ALL
00-CONTENTS Page 1
May 01/05
THY
CHAPTER 00
__________
INTRODUCTION
TABLE OF CONTENTS
_________________
SUBJECT
_______ CH/SE/SU
________ C
_ ____ ___________
PAGE EFFECTIVITY
Revision indication 72 ALL
Temporary Revisions (TR) 73 ALL
Specific features for AMM in 74 ALL
Airnav Environment
AMM Front Matter 74 ALL
Preliminary pages at Chapter 75 ALL
level
Revision Service 75 ALL
Access to a specific Task: 75 ALL
Power Plant Chapters 76 ALL
Engine Data - Introduction 76 ALL
Effectivity Table 81 ALL
00-CONTENTS Page 2
Nov 01/05
R
THY
INTRODUCTION - DESCRIPTION AND OPERATION
________________________________________
1. _______
General
The Aircraft Maintenance Manual (AMM) for the AIRBUS aircraft (A/C) conforms
to ATA Specification No. 100, revision 29.
Improvements in subsequent ATA 100 revisions have been taken into
consideration where appropriate so as to complement revision 29 for optimum
use of the AMM.
The AMM contains information required to service, repair, replace, adjust,
inspect and check equipment and systems of the aircraft normally performed
on the ramp or in the maintenance hangar.
Information required for equipment off the A/C is contained in the Vendor or
Manufacturer Component Maintenance Manuals (CMMV or CMMM).
The AMM also contains information about inspections and maintenance of
aircraft structure. However, repair of structure is contained in the
Structural Repair Manual (SRM) or Nacelle Structural Repair Manual (NSRM).
Information required for trouble shooting is contained in the Trouble
Shooting Manual (TSM).
The AMM contains the necessary data to cover scheduled maintenance
procedures prescribed by the Maintenance Review Board (MRB) document
respectively the Maintenance Planning Document (MPD) and the
deactivation/reactivation procedures relative to Master Minimum Equipment
List (MMEL) respectively to the Configuration Deviation List (CDL). If any
or all of the AMM is translated, the official version shall be the original
English language version produced by AIRBUS.
AIRBUS Technical Publications use both metric and non-metric systems of
measurement. The system used in the original reference documents is quoted
first, followed by the conversion into the other system in brackets.
The instructions and information contained in the AMM are applicable only to
the A/C as listed at the end of this introduction.
A. Correspondence
Correspondence concerning this publication should be directed to:
AIRBUS S.A.S.
Technical Data Support and Services
1 Rond Point Maurice BELLONTE
31707 BLAGNAC CEDEX FRANCE
FRANCE
or by the Request for Information/Revision form (No. SP 20001/10.87).
EFF :
ALL 00 -INTRO
Page 1
May 01/05
THY
2. Manual
________________
Breakdown
The AMM is divided into the following chapters
------------------------------------------------------------------------------
CONTENT CHAPTER
------------------------------------------------------------------------------
AIRCRAFT GENERAL
Time Limits/Maintenance Checks ......................................... 5
Dimensions & Areas ..................................................... 6
Lifting and Shoring .................................................... 7
Leveling & Weighing .................................................... 8
Towing & Taxiing ....................................................... 9
Parking & Mooring ...................................................... 10
Placards & Markings .................................................... 11
Servicing .............................................................. 12
AIRFRAME SYSTEMS
Standard Practices - Airframe .......................................... 20
Air Conditioning ....................................................... 21
Auto Flight ............................................................ 22
Communications ......................................................... 23
Electrical Power ....................................................... 24
Equipment/Furnishings .................................................. 25
Fire Protection ........................................................ 26
Flight Controls ........................................................ 27
Fuel ................................................................... 28
Hydraulic Power ........................................................ 29
Ice & Rain Protection .................................................. 30
Indicating/Recording Systems ........................................... 31
Landing Gear ........................................................... 32
Lights ................................................................. 33
Navigation ............................................................. 34
Oxygen ................................................................. 35
Pneumatic .............................................................. 36
Water/Waste ............................................................ 38
Information Systems .................................................... 46
Airborne Auxiliairy Power .............................................. 49
STRUCTURE
Structures ............................................................. 51
Doors .................................................................. 52
Fuselage ............................................................... 53
Nacelles/Pylons ........................................................ 54
Stabilizers ............................................................ 55
Windows ................................................................ 56
Wings .................................................................. 57
POWER PLANT
Standard Practices - Engines ........................................... 70
Power Plant ............................................................ 71
EFF :
ALL 00 -INTRO
Page 2
May 01/05
THY
------------------------------------------------------------------------------
CONTENT CHAPTER
------------------------------------------------------------------------------
Engine ................................................................. 72
Engine Fuel and Control ................................................ 73
Ignition ............................................................... 74
Air .................................................................... 75
Engines Controls ....................................................... 76
Engine Indicating ...................................................... 77
Exhaust ................................................................ 78
Oil .................................................................... 79
Starting ............................................................... 80
EFF :
ALL 00 -INTRO
Page 3
May 01/05
THY
(3) Each sub-section/sub-subsystem is broken down into subjects.
Example :
29-11-00 Green Main Hydraulic Power
|
|
|--- 29-11-14 Main HP Manifold 1011GM
|
|
|--- 29-11-15 PTU Manifold 1013GM
|
|
|--- 29-11-32 Relief Valve 1063GM
|
|
|--- 29-11-33 Priority Valve 1064GM
(1) General
The information contained in the Aircraft Maintenance Manual has been
divided into two main categories :
- Description and Operation
- Maintenance Procedure
The table below gives the various identifications under which the two
types of publications can be found.
EFF :
ALL 00 -INTRO
Page 4
May 01/05
THY
-------------------------------------------------------------------------------
| | | ATA NUMBER |
| | CORRESPOND. | (6 digits) |
| TYPE OF TOPIC | |------------------------|
| | P. BLOCK | CH | SE | SU |
|-----------------------------------------------------------------------------|
|Description and Operation (D/O) | 001-099 | X | X | 0 | 0 | 0 | 0 |
| | | X | X | X | 0 | 0 | 0 |
| | | X | X | X | X | 0 | 0 |
| | | X | X | X | X | X | 0 |
|-----------------------------------------------------------------------------|
|Maintenance Procedure | | | | | | | |
| | | | | | | | |
|Maintenance Practice (MP) | 201-299 | X | X | 0 | 0 | 0 | 0 |
| | | X | X | X | 0 | 0 | 0 |
| | | X | X | X | X | 0 | 0 |
| | | X | X | X | X | X | 0 |
| | | X | X | X | X | X | X |
| | | | | | | | |
|Servicing (S) | 301-399 | X | X | 0 | 0 | 0 | 0 |
| | | X | X | X | X | 0 | 0 |
| | | X | X | X | X | X | X |
| | | | | | | | |
|Deactivation/Reactivation (D/R) | 401-499 | X | X | X | X | 0 | 0 |
|Removal/Installation (R/I) | | X | X | X | X | X | X |
| | | | | | | | |
|Adjustment/Test (A/T) | 501-599 | X | X | 0 | 0 | 0 | 0 |
| | | X | X | X | 0 | 0 | 0 |
| | | X | X | X | X | 0 | 0 |
| | | X | X | X | X | X | 0 |
| | | X | X | X | X | X | X |
| | | | | | | | |
|Inspection/Check (I/C) | 601-699 | X | X | 0 | 0 | 0 | 0 |
| | | X | X | X | 0 | 0 | 0 |
| | | X | X | X | X | 0 | 0 |
| | | X | X | X | X | X | 0 |
| | | X | X | X | X | X | X |
| | | | | | | | |
|Cleaning/Painting (C/P) | 701-799 | X | X | 0 | 0 | 0 | 0 |
| | | X | X | X | 0 | 0 | 0 |
| | | X | X | X | X | 0 | 0 |
| | | X | X | X | X | X | X |
| | | | | | | | |
|Approved Repairs (A/R) | 801-899 | X | X | X | X | 0 | 0 |
| | | X | X | X | X | X | X |
| | | | | | | | |
-------------------------------------------------------------------------------
EFF :
ALL 00 -INTRO
Page 5
May 01/05
THY
NOTE : When the number of
____ pages for any Page Block will exceed 99 the
next pages will be numbered:
- 99, A00, A1, A2, A3 etc ...
- 599, A500, A501, A502, A503 etc ...
1
_ Procedures covering replenishment (hydraulic fluid, fuel,
etc.) are listed in chapters 12-13-XX. The last two letters
indicate the ATA reference at subject system.
2
_ Procedures covering e.g. filters, magnetic plug, lamp
replacement , etc. are listed at subject/component level
(XX-XX-17).
1
_ Removal/Installation (R/I)
At subject/component level (XX-XX-17), this topic provides all
data necessary for removing, installing or replacing a
component.
These procedures are composed of two independent tasks, one
for the removal and one for the installation.
EFF :
ALL 00 -INTRO
Page 6
May 01/05
THY
NOTE : 1- Removal task.
____
Because the installation task normally follows the
removal task, the close-up procedure is considered to
be not applicable.
Where there is a time separation between removal and
installation tasks, it is anticipated that the operator
will use common sense to determine the applicable
close-up procedures to be adopted.
2
_ Deactivation/Reactivation (D/R)
The deactivation procedures describe the procedures to be
performed to allow flight operations with a system or a part
of system failed according the MMEL and CDL requirements.
EFF :
ALL 00 -INTRO
Page 7
May 01/06
THY
These procedures are given at Chapter/Section level
(XX-XX-00).
Deactivation:
These procedures are also listed in the
Deactivation/Reactivation Index at the beginning of the AMM.
Reactivation:
The reactivation procedures describe the maintenance
operations to be required to restore the system to normal
operation after removal or deactivation of the faulty
component or system. In some cases, a reactivation procedure
may be preceded by a trouble-shooting procedure
(Cross-reference to the TSM).
1
_ Operational test:
This test is required to ascertain only that a system or unit
is operational. This test normally does not require special
equipment or facilities other than those installed on the
aircraft and is comparable to the test performed by the flight
crews.
2
_ Functional test:
This test is required to ascertain that a system or unit is
functioning in all aspects in accordance with minimum
acceptable system or unit design specifications. This test may
require supplemental ground support equipment and is more
specific and detailed than an operational test.
3
_ System test:
This test contains all adjustment specifications and
tolerances required to maintain system and/or unit performance
at maximum efficiency and design specifications.
1
_ General
Inspection/Check topics are divided into two parts:
- I/C without removal of components from the aircraft.
- I/C further to the removal of components from the aircraft.
a
_ I/C without component removal, like:
- visual I/C (cracks, damage, oxidation, paint, etc.)
- measurements (displacement, travel, overall clearances,
leak measurements).
EFF :
ALL 00 -INTRO
Page 8
May 01/05
THY
b
_ I/C with component removal, like:
- original manufacturers dimensions
- maximum and minimum clearances and in-service wear limits
(are given in table form).
2
_ There are three types of Inspections :
a
_ Detailed Inspection (DI) :
An intensive examination of a specific item, installation
or assembly to detect damage, failure or irregularity.
Available lighting is normally supplemented with a direct
source of good lighting at an intensity deemed appropriate.
Inspection aids such as mirrors, magnifying lenses etc..
may be necessary. Surface cleaning and elaborate access
procedures may be required.
b
_ General Visual Inspection (GVI) :
A visual examination of an interior or exterior area,
installation or assembly to detect obvious damage, failure
or irregularity. This level of inspection is made from
within touching distance unless otherwise specified. A
mirror may be necessary to ensure visual access to all
surfaces in the inspection area. This level of inspection
is made under normally available lighting conditions such
as daylight, hangar lighting, flashlight or drop-light and
may require removal or opening of access panels or doors.
Stands, ladders or platforms may be required to gain
proximity to the area being checked.
c
_ Special Detailed Inspection (SDI)
An intensive examination of a specific item, installation,
or assembly to detect damage, failure or irregularity. The
examination is likely to make extensive use of specialized
Inspection Techniques and/or equipment. Intricate cleaning
and substantial access or disassembly procedure may be
required.
IMPORTANT:
EFF :
ALL 00 -INTRO
Page 9
May 01/05
THY
The AMM does not include Temporary Repairs.
If Temporary Repairs are made, it is the responsibility of the
Operator to record the following:
- location of the damage
- nature of the damage
- nature of the repair
- service life limit of the Temporary Repair.
3. _____________________________________________
General arrangement and how to use the manual
A. Manual structure
EFF :
ALL 00 -INTRO
Page 10
May 01/05
THY
(c) Table of Contents (TOC)
Each chapter in the AMM begins with a Table of Contents. The
Table of Contents shows each section contained in the chapter and
the subject material within the section.
(a) General
Main functions are described for functional/physical groups and
their relationship with other groups and systems.
EFF :
ALL 00 -INTRO
Page 11
May 01/05
THY
- The zone in which the component is located,
- Access Door numbers.
- ATA reference which contains the R/I procedure of the
component.
(g) Operation
Detailed operational information on the installation/circuit are
provided. The associated schematic shows the Functional
Identification Numbers (FIN) of each component and associated
electrical connections. The aim is to facilitate fault isolation
and to ease cross-reference to the Aircraft Wiring Manual.
EFF :
ALL 00 -INTRO
Page 12
May 01/05
THY
Maintenance Procedure Structure
Figure 001
EFF :
ALL 00 -INTRO
Page 13
May 01/05
THY
(2) Content of paragraph Reason for the job
(Ref. Fig. 002)
The paragraph reason for the job may refer to the following Airbus
documents: MMEL, CDL or MPD task.
This paragraph may be used to explain the reason for the task.
For a self explanatory reason this paragraph is not used.
(b) Materials
All the materials which are prescribed for use during maintenance
procedures are recorded in chapter 20-31-00 and 70-30-00 as
follows :
20-31-00 - General use and APU
70-30-00 - Use specific to the engines
Throughout the manual (including the Structural Repair Manual,
Service Bulletins and Service Information Letters) only the
Material No. are provided.The purpose of this reference system
is to make sure that the right material is prescribed (even if
this material is replaced by another one) ; the customer will
have the opportunity to select his vendor by comparison with the
referenced specifications.
All materials listed in the AMM are also listed in the Consumable
Materials List (CML).
EFF :
ALL 00 -INTRO
Page 14
May 01/05
THY
Reason for the Job
Figure 002
EFF :
ALL 00 -INTRO
Page 15
May 01/05
THY
Job Set up Information
Figure 003
EFF :
ALL 00 -INTRO
Page 16
May 01/05
THY
(c) Expendable Parts
To facilitate the preparation of the job, the IPC or PIPC CSN
(Catalog Sequence Number) of expendable parts are listed in the
paragraph Job Set-up Information under the title Expendable
Parts.
Use IPC or PIPC to find the corresponding Part Numbers.
4. AMTOSS
_______________________________________________________________________
(Aircraft Maintenance Task Oriented Support System) Task/Subtask
Numbering
A. General
The functional arrangement of data and the ATA 100 numbering system form
the basis for the assignment of maintenance Task/subtask numbers to each
maintenance operation (Task) described in the AMM.
NOTE : TASK/Sub-task numbers are mainly for the use of the Production
____
Management Data Base (PMDB) and have no significance for the
reader of the AMM. Task/Subtask numbers are included in the manual
to allow the management of technical data contained in the PMDB
and the AMM magnetic tape
IMPORTANT:
B. Text breakdown
EFF :
ALL 00 -INTRO
Page 17
May 01/05
THY
-------------------------------------------------------------------------------
ELEMENT FUNCTION
-------------------------------------------------------------------------------
1 to 3 ATA six-digit number
Example:
-78-31-00-710-040-A 01
| |
| |
| |
This alpha digit-| |
identifies a |
configuration of |
criteria (SB etc..) |
|
|
These two numerical-|
digits identify a
configuration of
method
EFF :
ALL 00 -INTRO
Page 18
May 01/05
THY
-------------------------------------------------------------------------------
ELEMENT FUNCTION
-------------------------------------------------------------------------------
- Configurations of criteria:
78-31-00-710-040-A
-
|
|
--------------------------------
* this digit is blank when no
configuration is existing
* when there are several configu-
rations of criteria this digit
changes as follows:
78-31-00-710-040-A first configuration
78-31-00-710-040-B second configuration
78-31-00-710-040-C third configuration
- Configurations of method:
78-31-00-710-040- 01
--
|
-------------------------------------
* these two digits are blank
when only one configuration
is existing
* when there are several configurations
of method, these digits change as
follows:
78-31-00-710-040- 01 first configuration
78-31-00-710-040- 02 second configuration
78-31-00-710-040- 03 third configuration
EFF :
ALL 00 -INTRO
Page 19
May 01/05
THY
-------------------------------------------------------------------------------
ELEMENT FUNCTION
-------------------------------------------------------------------------------
1 to 4 Identical functions as for a TASK
-------------------------------------------------------------------------------
|FUNCTION CODE | DEFINITION |TASK|SUB-T|
-------------------------------------------------------------------|----|-----|
| 000 | REMOVAL | X | |
| 010 | REMOVE/OPEN FOR ACCESS | X | X |
| 020 | REMOVE UNIT/COMPONENTS | | X |
| 040 | DEACTIVATION | X | X |
| 080 | REMOVE TEST EQUIPMENT | X | X |
| 081 | REMOVE SAFETY LOCKS | X | X |
| 100 | CLEANING | X | |
| 110 | CHEMICAL | | X |
| 120 | ABRASIVE | | X |
| 130 | ULTRASONIC | | X |
| 140 | MECHANICAL | | X |
| 150 | PAINT STRIPPING | | X |
| 160 | MISCELLANEOUS CLEANING | | X |
| 170 | FLUSHING | | X |
| 200 | INSPECTION/CHECK | X | |
| 210 | GENERAL VISUAL INSPECTION/CHECK | X | X |
| 220 | DETAILED/DIMENSIONAL INSPECTION/CHECK | X | X |
EFF :
ALL 00 -INTRO
Page 20
May 01/05
THY
-------------------------------------------------------------------------------
|FUNCTION CODE | DEFINITION |TASK|SUB-T|
-------------------------------------------------------------------|----|-----|
| 230 | PENETRANT INSPECTION | X | X |
| 240 | MAGNETIC INSPECTION | X | X |
| 250 | EDDY CURRENT INSPECTION | X | X |
| 260 | X-RAY/HOLOGRAPHIC INSPECTION | X | X |
| 270 | ULTRASONIC INSPECTION | X | X |
| 280 | SPECIFIC/SPECIAL INSPECTION/CHECK | X | X |
| 281 | SAMPLING | X | X |
| 290 | BORESCOPE INSPECTION | X | X |
| 300 | CORRECTION/REPAIR | X | |
| 310 | WELDING/BRAZING | | X |
| 320 | MACHINING/REAMING/BLENDING | | X |
| 330 | COMPOSITE | X | X |
| 340 | FIBERGLS/PLASTIC/HNYCMB/EPOXY | X | X |
| 350 | MISCELLANEOUS | X | X |
| 360 | LEAKAGE | | X |
| 370 | PAINTING | X | X |
| 380 | PLATING | X | X |
| 390 | SEALING | | X |
| 400 | INSTALLATION | X | |
| 410 | INSTALL/CLOSE ITEMS REMOVED/OPENED FOR ACCESS | X | X |
| 420 | INSTALL UNIT/COMPONENT | | X |
| 440 | REACTIVATION | X | X |
| 480 | INSTALL TEST/SUPPORT EQUIPMENT | X | X |
| 481 | INSTALL SAFETY LOCKS | X | X |
| 500 | MATERIAL AND AIRCRAFT HANDLING | X | |
| 530 | PACKING | | X |
| 550 | STORAGE/RETURN TO SERVICE | X | X |
| 553 | AIRCRAFT STORAGE | X | X |
| 554 | AIRCRAFT RETURN TO SERVICE | X | X |
| 555 | PARKING | X | X |
| 556 | MOORING | X | X |
| 560 | MARSHALLING | | X |
| 580 | AIRCRAFT HANDLING | X | |
| 581 | LIFTING | X | X |
| 582 | JACKING | X | X |
| 583 | SHORING | X | X |
| 584 | TOWING | X | X |
| 585 | TAXIING | X | X |
| 586 | LOWERING | X | X |
| 600 | SERVICING/PRESERVING/LUBRICATING | X | |
| 610 | SERVICING | X | |
| 611 | HYDRAULIC REPLENISHING | X | X |
| 612 | OIL REPLENISHING | X | X |
| 613 | MISCELLANEOUS REPLENISHING (INCLUDING POTABLE | X | X |
EFF :
ALL 00 -INTRO
Page 21
May 01/05
THY
-------------------------------------------------------------------------------
|FUNCTION CODE | DEFINITION |TASK|SUB-T|
-------------------------------------------------------------------|----|-----|
| | WATER,WINDSHIELD WIPING, ETC.) | | |
| 614 | GAS CHARGING/DISCHARGING | X | X |
| 615 | AIRCRAFT CLEANING | X | X |
| 618 | AIR PRE-CONDITIONING | X | X |
| 620 | PRESERVING | | X |
| 630 | DEPRESERVING | X | X |
| 640 | LUBRICATING | X | X |
| 650 | FUELING/DEFUELING | X | X |
| 660 | DEICING/ANTI-ICING | X | |
| 670 | DISINFECT/SANITIZE | X | |
| 680 | DRAIN FLUID | X | X |
| 700 | TESTING | X | |
| 710 | OPERATIONAL | X | X |
| 720 | FUNCTIONAL | X | X |
| 730 | SYSTEM | X | X |
| 740 | BITE | X | X |
| 750 | SPECIAL | X | X |
| 760 | ELECTRICAL | X | X |
| 780 | PRESSURE | X | X |
| 790 | LEAK | X | X |
| 800 | MISCELLANEOUS | | |
| 810 | FAULT ISOLATION | X | X |
| 820 | ADJUSTING/ALIGNING/CALIBRATING/RIGGING | X | X |
| 840 | PREPARE FOR, RESTORE TO | X | |
| 860 | AIRCRAFT/SYSTEM CONFIGURATION | X | |
| 861 | ENERGIZE ELECTRICAL CIRCUITS | X | X |
| 862 | DE-ENERGIZE ELECTRICAL CIRCUITS | X | X |
| 863 | PRESSURIZE HYDRAULICS | X | X |
| 864 | DEPRESSURIZE HYDRAULICS | X | X |
| 865 | C/B OPENING/CLOSING | | X |
| 866 | FLIGHT CONTROL SURFACES MOVEMENT | X | X |
| 867 | LANDING GEAR MOVEMENT | X | X |
| 869 | AIRCRAFT/SYSTEM CONFIGURATION - MISCELLANEOUS | X | X |
| 870 | BLEEDING | X | X |
| 880 | HEATING COOLING | | X |
| 910 | STANDARD PRACTICES | X | X |
| 911 | MECHANICAL PARTS | X | X |
| 912 | ELECTRICAL PARTS | X | X |
| 914 | SEALANTS | X | X |
| 915 | ADHESIVES | X | X |
| 916 | PROTECTIVE TREATMENTS | X | X |
| 917 | PIPEWORK | X | X |
| 918 | MISCELLANEOUS METALLIC/NON-METALLIC PARTS | X | X |
| 920 | SCHEDULED REPLACEMENT | X | |
EFF :
ALL 00 -INTRO
Page 22
May 01/05
THY
-------------------------------------------------------------------------------
|FUNCTION CODE | DEFINITION |TASK|SUB-T|
-------------------------------------------------------------------|----|-----|
| 930 | MARKING | X | X |
| 940 | JOB SET-UP/CLOSE-UP | X | |
| 941 | JOB SET-UP | | X |
| 942 | CLOSE-UP | | X |
| 950 | MASKING | | X |
| 960 | REPLACE | X | X |
| 970 | DATA RECORDING/CALCULATING | | X |
| 980 | MANUAL OPERATION OR POSITIONING | | X |
| 990 | ILLUSTRATIONS, TABLES | X | |
| 991 | ILLUSTRATIONS | X | |
| 992 | IDENTIFIABLE TABLES | X | |
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
FUNCTION CODES | PAGE BLOCKS
-------------------------------------------------------------------------------
010, 081, 410, 481, 550 series, 580 series | 201
860 series, 910 series |
_____________________________________________|_________________________________
600 series | 301
---------------------------------------------|---------------------------------
000, 040, 400, 440, 920 | 401
---------------------------------------------|---------------------------------
080, 480, 700 series, 820 | 501
---------------------------------------------|---------------------------------
200 series | 601
EFF :
ALL 00 -INTRO
Page 23
May 01/05
THY
How to Find a Referenced Task
Figure 004 (SHEET 1)
EFF :
ALL 00 -INTRO
Page 24
May 01/05
THY
How to Find a Referenced Task
Figure 004 (SHEET 2)
EFF :
ALL 00 -INTRO
Page 25
May 01/05
THY
-------------------------------------------------------------------------------
FUNCTION CODES | PAGE BLOCKS
-------------------------------------------------------------------------------
---------------------------------------------|---------------------------------
100, 170, 370 | 701
---------------------------------------------|---------------------------------
300, 330, 340, 350, 380 | 801
-------------------------------------------------------------------------------
5. ____________________________________
Statement of Effectivity in the Text
A. General
The TASK and Sub-task numbers are preceded by the associated A/C
effectivity statements,refer sample hereafter.There is no link between a
TASK variant letter (6th element) and a Sub-task variant letter not even
when TASK and Sub-task have the same A/C effectivity.This means for the
reader of the AMM that the selection of information for a specific A/C
must be performed according to the A/C effectivity statements on sub-task
level.
In principle the Sub-task numbers have no significance for the AMM
reader.
6. _______________________________________________
Service Bulletin and Customer Originated Change
EFF :
ALL 00 -INTRO
Page 26
May 01/05
THY
Effectivities Statement in the text - Example
Figure 005
EFF :
ALL 00 -INTRO
Page 27
May 01/05
THY
Customer Originated Changes (COCs), incorporated into the AMM at *
Customer request to reflect data or procedures originated by and *
peculiar to that specific customer, will be permanently identified *
by the COC reference number and by asterisks in the right hand *
margin on the individual pages (See example to the right of this *
paragraph). *
The COC data incorporated into the Technical Data is shown in *
POST configuration only. *
(2) Responsibility
Where the Customer requests Airbus to incorporate the Customers
originated data or that of any other party into the technical data
issued by Airbus (Technical Data) relating to the operation,
maintenance, overhaul, repair or modification of the aircraft, Airbus
shall do so on the condition that the use of the COC data shall be
entirely at the Customers risk, Airbus being under no liability
whatsoever in respect of either the contents of any COC data, or the
effect which the incorporation of such COC data may have on the
Technical Data issued by Airbus.
7. Special
____________________________________________________
Procedure and Standard Maintenance Practices
Special procedures specific to AIRBUS are considered as AIRBUS standard
maintenance practices when they are applicable to several systems.
These procedures are described in chapters 20 and 70.
Procedures applicable to one system only are described in the relevant
chapter.
NOTE : Industry standard maintenance practices are not given in the AMM.
____
Thus, procedures related to simple components that do not require:
- A specific aircraft configuration
- Safety precautions
- Specific tests after installation,
are not given in the AMM.
All standard torque values are given in chapters 20 and 70.
For the standard torque values, the term tighten is generally used
in the procedures.
Non-standard torque values are specified in the procedure concerned.
EFF :
ALL 00 -INTRO
Page 28
May 01/05
THY
For the non-standard torque values, the term torque is used followed by
the specific torque value.
8. Definition
___________________
of terms
The following terms are used in the AMM and are defined as follows:
NOTE : Calls attention to methods which make the job easier or provide
____
supplementary or explanatory information.
9. Aircraft
_______________________________
status for maintenance
The following items shall be considered as the basic aircraft configuration,
before you start a maintenance task:
- Aircraft on the ground resting on landing gear (the ground safety locks
and the wheel chocks are in position on the landing gear).
- Engines shut down, thrust reversers closed and locked.
- Aircraft in clean configuration.
- Parking brake applied.
- Aircraft electrical network de-energized.
- Hydraulic systems depressurized.
- Access to the cockpit and cabin is available.
- All circuits breakers are in closed position.
- All controls in NORM, AUTO or OFF position.
In case a specific aircraft configuration is required during a maintenance
procedure, a specific paragraph Aircraft Configuration is provided at
task level.
10. Replacement
________________________
of Equipment
The instructions for the replacement of equipment are given in the
Removal/Installation topics.
However, it is necessary to make sure that the replacement equipment has
either the same P/N as the removed equipment or an approved interchangeable
P/N.
For some computers, the LRU IDENT function on the MCDU gives the P/N in
addition to the identification plate on the front face of the computer.
EFF :
ALL 00 -INTRO
Page 29
Aug 01/06
R
THY
11. Functional
_____________________________
Item Numbers (FIN)
The equipment on the aircraft is identified by a unique identifier
designated Functional Item Number (FIN). The basic element of the FIN is a
two letter code indicating to which system circuit the equipment belongs.
To this code are added prefixes and/or suffixes which provide the unique
identification for individual items of equipment.
For electrical equipment (any component with an electrical connection) the
FIN is of the form 14CA1 where:
- 14 = Fourteenth component in circuit CA
- CA = Circuit two letter code (Autothrust)
- 1 = Suffix - First of several similar systems (Autothrust System 1)
NOTE : Identical components which perform the same function in the same
____
circuit are differenciated by a suffix number.
The general rule is that an even suffix identifies a component on
the right hand side and an odd suffix identifies a component on the
left hand side.
For mechanical equipment the FIN is similar to the electrical FIN except
that the second letter of the system/circuit identifier becomes an M (for
example 1040GM).
A complete list of system/circuit letter codes and an explanation of the
FIN breakdown can be found in the introduction to the Aircraft Schematic
Manual (ASM), Aircraft Wiring Manual (AWM) and Aircraft Wiring List (AWL).
12. ____________________
Units of Measurement
A. Abbreviation
-------------------------------------------------------------------------------
| U.S. CUSTOMARY SYSTEM | SI-METRIC MEASUREMENT SYSTEM |
|-----------------------------------------------------------------------------|
| ABBREVIATION | DEFINITION | ABBREVIATION | DEFINITION |
|------------------|--------------------|------------------|------------------|
| deg.F | Degrees Fahrenheit | deg.C | Degrees Celsius |
| ft. | Foot | m | Meter |
| USgal | US Gallon | l | Liter |
R | USquart | US Quart | l | Liter |
| in. | Inch | mm | Millimeter |
| in.2 | Square Inch | mm2 | Square Millimeter|
| in.2 | Square Inch | cm2 | Square Centimeter|
| lb | Pound | kg | Kilogram |
| lbf | Pound Force | daN | Deca Newton |
| lbf.in | Pound Force-Inch | m.daN | Meter deca Newton|
| | (Torque) | | |
| lbf.ft | Pound Force-Foot | m.daN | Meter deca Newton|
| | (Torque) | | |
EFF :
ALL 00 -INTRO
Page 30
Aug 01/06
THY
-------------------------------------------------------------------------------
| U.S. CUSTOMARY SYSTEM | SI-METRIC MEASUREMENT SYSTEM |
|-----------------------------------------------------------------------------|
| ABBREVIATION | DEFINITION | ABBREVIATION | DEFINITION |
|------------------|--------------------|------------------|------------------|
| in.Hg | Inch of Mercury | hPa | Hecto Pascal |
| oz | Ounce (Weight) | g | Gram |
| psi | Pound Square Inch | bar | Bar |
| lb.min | Pound per minute | Kg.min | Kilogram per |
| | | | minute |
| USgal.min | US Gallon per | l.min | Liter per minute |
| | minute | | |
| lb.min | Pound per minute | kg.min | Kilogram per |
| | | | minute |
| USgal.min | US Gallon per | l.min | Liter per minute |
| | minute | | |
| | | | |
| | | W/dm2 | Watt per square |
| | | | decimeter |
| | | | |
| | | cc | Cubic Centimeter |
| | | | |
-------------------------------------------------------------------------------
B. Conversion tables
EFF :
ALL 00 -INTRO
Page 31
May 01/05
THY
------------------------------------------------------------------------------
FROM: S.I.Measurement TO: US Customary System
System
R ------------------------------------------------------------------------------
1 bar = 14.5037 psi
1 mm2 = 0.0016 in.2
1 cm2 = 0.1550 in.2
1 daN = 2.2481 lbf
1 g = 0.0353 oz
1 hPa = 0.0295 in.Hg
1 kg = 2.2046 lb
1 kg.min = 2.2046 lb.min
1 l = 0.2641 USgal
1 l = 1.057 USquart
1 l.min = 0.2641 USgal.min
1 mdaN = 88.4956 lbf.in
1 mdaN = 7.3801 lbf.ft
1 m = 3.2809 ft
1 mm = 0.0394 in
1 cm3 = 0.06102 in3
1hPa = 0.0145 psi
EFF :
ALL 00 -INTRO
Page 32
Nov 01/06
THY
-------------------------------------------------------------------------------
FROM: US Customary System TO: S.I. Measurement System
-------------------------------------------------------------------------------
1 psi = 0.0689 bar
1 in.2 = 645.1600 mm2
1 in.2 = 6.4516 cm2
1 lbf = 0.4448 daN
1 oz = 28.3495 g
1 in.Hg = 33.8640 hPa
1 lb = 0.4536 kg
1 lb.min = 0.4536 kg.min
1 USgal = 3.7854 l
1 USgal.min = 3.7854 l.min
1 USquart = 0.9464 l
1 lbf.in = 0.0113 mdaN
1 lbf.ft = 0.1356 mdaN
1 ft = 0.3048 m
1 in = 25.4 mm
1 in3 = 16.3871 cm3
1 in.Hg = 0.491 psi
13. _______
Symbols
For definition of symbols as used in the AMM refer to ASM/AWM introduction.
14. _________________________________________
Glossary of Abbreviations used in the AMM
-------------------------------------------------------------------------------
ABBREVATION SIGNIFICATION
-------------------------------------------------------------------------------
A Amber
A Alternate
A/C Aircraft
A/D Analog/Digital
EFF :
ALL 00 -INTRO
Page 33
May 01/05
THY
-------------------------------------------------------------------------------
ABBREVATION SIGNIFICATION
-------------------------------------------------------------------------------
A/SKID Anti-Skid
A/THR Autothrust
A/XFMR Autotransformer
AC Alternating Current
ACCEL Acceleration/Accelerate
ACCLRM Accelerometer
ACCU ACCUMULATOR
ACQN Acquisition
ACT Active
ACTR Actuator
EFF :
ALL 00 -INTRO
Page 34
May 01/05
THY
-------------------------------------------------------------------------------
ABBREVATION SIGNIFICATION
-------------------------------------------------------------------------------
ADM Air Data Module
ADV Advisory
AF Audio Frequency
AIL Aileron
ALIGN Alignment
ALT Altitude
ALTM Altimeter
AM Amplitude Modulation
EFF :
ALL 00 -INTRO
Page 35
May 01/05
THY
-------------------------------------------------------------------------------
ABBREVATION SIGNIFICATION
-------------------------------------------------------------------------------
ANN Annunciator
ANT Antenna
AOA Angle-of-Attack
AP Autopilot
APPR Approach
ARPT Airport
ASSY Assembly
EFF :
ALL 00 -INTRO
Page 36
May 01/05
THY
-------------------------------------------------------------------------------
ABBREVATION SIGNIFICATION
-------------------------------------------------------------------------------
ATS Autothrottle System
ATT Attitude
ATTND Attendant
AUTO Automatic
AUX Auxiliary
AVAIL Available
AVNCS Avionics
AWY Airway
AZ Azimuth
B Blue
BARO Barometric
BAT Battery
BNR Binary
EFF :
ALL 00 -INTRO
Page 37
May 01/05
THY
-------------------------------------------------------------------------------
ABBREVATION SIGNIFICATION
-------------------------------------------------------------------------------
BP Bottom Plug
BRG Bearing
BRK Brake
BRKR Breaker
BRKT Bracket
BTN Button
BU Battery Unit
BUS Busbar
C Close
C Celsius, Centigrade
CAB Cabin
CAPT Captain
EFF :
ALL 00 -INTRO
Page 38
May 01/05
THY
-------------------------------------------------------------------------------
ABBREVATION SIGNIFICATION
-------------------------------------------------------------------------------
CAUT Caution
CG Center of Gravity
CHAN Channel
CHG Change
CK Check
CKPT Cockpit
CKT Circuit
CL Center Line
CLB Climb
EFF :
ALL 00 -INTRO
Page 39
May 01/05
THY
-------------------------------------------------------------------------------
ABBREVATION SIGNIFICATION
-------------------------------------------------------------------------------
CLG Centerline Landing Gear
CLOG Clogging
CLR Clear
CMD Command
CNTOR Contactor
CO Company
COM Communication
COMPT Compartment
COMPTR Comparator
CONFIG Configuration
CONT Controller
CONV Converter
COS Cosine
CPLR Coupler
EFF :
ALL 00 -INTRO
Page 40
May 01/05
THY
-------------------------------------------------------------------------------
ABBREVATION SIGNIFICATION
-------------------------------------------------------------------------------
CPRSR Compressor
CRG Cargo
CRS Course
CRZ Cruise
CSTR Constraint
CT Current Transformer
CTL Central
CTL Control
CTR Center
CU Control Unit
CUR Current
CW Clockwise
EFF :
ALL 00 -INTRO
Page 41
May 01/05
THY
-------------------------------------------------------------------------------
ABBREVATION SIGNIFICATION
-------------------------------------------------------------------------------
D/O Description and Operation
DA Drift Angle
DC Direct Current
DEC Declination
DECEL Decelerate
DECR Decrease
DEF Definition
DES Descent
DEST Destination
DEV Deviation
DH Decision Height
DIA Diameter
EFF :
ALL 00 -INTRO
Page 42
May 01/05
THY
-------------------------------------------------------------------------------
ABBREVATION SIGNIFICATION
-------------------------------------------------------------------------------
DIFF Differential
DIST Distance
DN Down
DNLK Downlock
DR Dead Reckoning
DRVR Driver
DSCRT Discrete
DSPL Display
DTG Distance to Go
EFF :
ALL 00 -INTRO
Page 43
May 01/05
THY
-------------------------------------------------------------------------------
ABBREVATION SIGNIFICATION
-------------------------------------------------------------------------------
DU Display Unit
E East
ECON Economy
EFF :
ALL 00 -INTRO
Page 44
May 01/05
THY
-------------------------------------------------------------------------------
ABBREVATION SIGNIFICATION
-------------------------------------------------------------------------------
EMER Emergency
END Endurance
ENG Engine
EO Engine Out
EQPT Equipment
ESS Essential
EST Estimated
EVAC Evacuation
EXCESS Excessive
EFF :
ALL 00 -INTRO
Page 45
May 01/05
THY
-------------------------------------------------------------------------------
ABBREVATION SIGNIFICATION
-------------------------------------------------------------------------------
EXT Exterior, External
F Fahrenheit
FC Fully Closed
FCTN Function
FD Flight Director
FDBK Feedback
FE Flight Envelope
EFF :
ALL 00 -INTRO
Page 46
May 01/05
THY
-------------------------------------------------------------------------------
ABBREVATION SIGNIFICATION
-------------------------------------------------------------------------------
FF Fuel Flow
FG Flight Guidance
FIG Figure
FL Flight Level
FLEX Flexible
FLP Flap
FLT Flight
FM Flight Management
FO Fully Open
EFF :
ALL 00 -INTRO
Page 47
May 01/05
THY
-------------------------------------------------------------------------------
ABBREVATION SIGNIFICATION
-------------------------------------------------------------------------------
FPV Flight Path Vector
FQ Fuel Quantity
FR Frame
FREQ Frequency
FW Failure Warning
FWD Forward
G Green
GA Go-Around
GALY
Galley
GEN Generator
EFF :
ALL 00 -INTRO
Page 48
May 01/05
THY
-------------------------------------------------------------------------------
ABBREVATION SIGNIFICATION
-------------------------------------------------------------------------------
GLR Generator Line Relay
GND Ground
GS Ground Speed
GW Gross Weight
HDG Heading
HF High Frequency
HI High
EFF :
ALL 00 -INTRO
Page 49
May 01/05
THY
-------------------------------------------------------------------------------
ABBREVATION SIGNIFICATION
-------------------------------------------------------------------------------
HP High Pressure
HS High Speed
HYD Hydraulic
I/O Input/Output
I/P Input
IGN Ignition
IMM Immediate
INB Inbound
EFF :
ALL 00 -INTRO
Page 50
May 01/05
THY
-------------------------------------------------------------------------------
ABBREVATION SIGNIFICATION
-------------------------------------------------------------------------------
INBD Inboard
INCR Increment
IND Indicator
INFO Information
INIT Initial(ization)
INOP Inoperative
INR Inner
INT Interrupt
INTCP Intercept
INTFC Interface
INTL Internal
INV Inverter
IP Intermediate Pressure
IR Inertial Reference
ISOL Isolation
EFF :
ALL 00 -INTRO
Page 51
May 01/05
THY
-------------------------------------------------------------------------------
ABBREVATION SIGNIFICATION
-------------------------------------------------------------------------------
IVS Inertial Vertical Speed
L Left
L Length
LA Linear Accelerometer
LAT Lateral
LAT Latitude
LAV Lavatory
LDG Landing
LE Leading Edge
LKD Locked
LL Lat/Long
EFF :
ALL 00 -INTRO
Page 52
May 01/05
THY
-------------------------------------------------------------------------------
ABBREVATION SIGNIFICATION
-------------------------------------------------------------------------------
LNG Long
LO Low
LOC Localizer
LONG Longitude
LONGN Longeron
LP Low Pressure
LS Loudspeaker
LT Light
LV Low Voltage
LVL Level
LW Landing Weight
LWR Lower
EFF :
ALL 00 -INTRO
Page 53
May 01/05
THY
-------------------------------------------------------------------------------
ABBREVATION SIGNIFICATION
-------------------------------------------------------------------------------
MAG Magnetic
MAINT Maintenance
MAN Manual
MAX Maximum
MED Medium
MI Magnetic Indicator
MIC Microphone
MID Middle
MIN Minimum
MISC Miscellaneous
EFF :
ALL 00 -INTRO
Page 54
May 01/05
THY
-------------------------------------------------------------------------------
ABBREVATION SIGNIFICATION
-------------------------------------------------------------------------------
MLI Magnetic Level Indicator
MODLTR Modulator
MSG Message
MSW Microswitch
MTG Mounting
EFF :
ALL 00 -INTRO
Page 55
May 01/05
THY
-------------------------------------------------------------------------------
ABBREVATION SIGNIFICATION
-------------------------------------------------------------------------------
MTOGW Maximum Takeoff Gross Weight
MU Management Unit
MVT Movement
N Normal, North
NAC Nacelle
NAV Navigation
NC Normally Closed
ND Navigation Display
NEG Negative
EFF :
ALL 00 -INTRO
Page 56
May 01/05
THY
-------------------------------------------------------------------------------
ABBREVATION SIGNIFICATION
-------------------------------------------------------------------------------
NMI Non Maskable Interrupt
No Number
NO Normally Open
NORM Normal
NS No Smoking
NUM Numerical
O Open
O/P Output
OC Open Circuit
OC Overcurrent
OF Overfrequency
OFST Offset
OK Correct
EFF :
ALL 00 -INTRO
Page 57
May 01/05
THY
-------------------------------------------------------------------------------
ABBREVATION SIGNIFICATION
-------------------------------------------------------------------------------
OMS Onboard Maintenance System
OP Operational
OPP Opposite
OPS Operation
OPT Optimum
OUTBD Outboard
OVBD Overboard
OVHD Overhead
OVHT Overheat
OVLD Overload
OVRD Override
OVSP Overspeed
OXY Oxygen
P/B Pushbutton
PA Passenger Address
PAX Passenger
PC Pack Controller
EFF :
ALL 00 -INTRO
Page 58
May 01/05
THY
-------------------------------------------------------------------------------
ABBREVATION SIGNIFICATION
-------------------------------------------------------------------------------
PCM Pulse Code Modulation
PED Pedestal
PERF Performance
PF Power Factor
PH Phase
PN Part Number
PNL Panel
POS Position
POT Potentiometer
EFF :
ALL 00 -INTRO
Page 59
May 01/05
THY
-------------------------------------------------------------------------------
ABBREVATION SIGNIFICATION
-------------------------------------------------------------------------------
PREAMP Preamplifier
PRED Prediction
PRESEL Preselector/Preselection
PREV Previous
PRIM Primary
PROF Profile
PROG Progress
PROT Protection
PROX Proximity
PT Point
PTT Push-to-Talk
EFF :
ALL 00 -INTRO
Page 60
May 01/05
THY
-------------------------------------------------------------------------------
ABBREVATION SIGNIFICATION
-------------------------------------------------------------------------------
PU Panel Unit
PWR Power
Q Pitch Rate
QAD Quick-Attach-Detach
QTY Quantity
R Red
R Right
R/I Radio/Inertial
RAD Radio
EFF :
ALL 00 -INTRO
Page 61
May 01/05
THY
-------------------------------------------------------------------------------
ABBREVATION SIGNIFICATION
-------------------------------------------------------------------------------
RAM Random Access Memory
RC Repetitive Chime
RCDR Recorder
RCL Recall
RCPT Receptacle
RCPTN Reception
RCVR Receiver
RECT Rectifier
RED Reduction
REF Reference
REFUEL Refueling
REG Regulator
REL Release
RES Resistance
RET Return
REV Reverse
EFF :
ALL 00 -INTRO
Page 62
May 01/05
THY
-------------------------------------------------------------------------------
ABBREVATION SIGNIFICATION
-------------------------------------------------------------------------------
RF Radio Frequency
RLY Relay
RNG Range
RPLNT Repellent
RQRD Required
RST Reset
RSV Reserve
RSVR Reservoir
RTE Route
RTN Return
RUD Rudder
RWY Runway
S South
EFF :
ALL 00 -INTRO
Page 63
May 01/05
THY
-------------------------------------------------------------------------------
ABBREVATION SIGNIFICATION
-------------------------------------------------------------------------------
S/C Step Climb
SAF Safety
SC Single Chime
SD System Display
SEC Secondary
SHED Shedding
SHT Short
SIG Signal
SLT Slat
SMK Smoke
EFF :
ALL 00 -INTRO
Page 64
May 01/05
THY
-------------------------------------------------------------------------------
ABBREVATION SIGNIFICATION
-------------------------------------------------------------------------------
SN Serial Number
SOL Solenoid
SPD Speed
SPLY Supply
SQ Squelch
STA Station
STAB Stabilizer
STAT Static
STBY Standby
STD Standard
STGR Stringer
STS Status
SVCE Service
SW Switch
SWTG Switching
SYNTHR Synthetizer
SYS System
T True, Turn
EFF :
ALL 00 -INTRO
Page 65
Aug 01/05
R
THY
-------------------------------------------------------------------------------
ABBREVATION SIGNIFICATION
-------------------------------------------------------------------------------
T/C Top of Climb
TACT Tactical
TBC To Be Confirmed
TBD To be Determined
TE Trailing Edge
TEMP Temperature
TGT Target
THR Thrust
THRM Thermal
EFF :
ALL 00 -INTRO
Page 66
Aug 01/05
THY
-------------------------------------------------------------------------------
ABBREVATION SIGNIFICATION
-------------------------------------------------------------------------------
THS Trimmable Horizontal Stabilizer
TK Tank
TMR Timer
TO Takeoff
TOT Total
TR Transformer Rectifier
TRANS Transition
TRIG Trigger
TROPO Tropopause
TRV Travel
EFF :
ALL 00 -INTRO
Page 67
May 01/05
THY
-------------------------------------------------------------------------------
ABBREVATION SIGNIFICATION
-------------------------------------------------------------------------------
TSM Trouble Shooting Manual
TTG Time to Go
UF Underfrequency
UNLK Unlock
UNSD Unused
UPR Upper
UV Under Voltage
Vc Calibrated Airspeed
VC Ventilation Controller
EFF :
ALL 00 -INTRO
Page 68
May 01/05
THY
-------------------------------------------------------------------------------
ABBREVATION SIGNIFICATION
-------------------------------------------------------------------------------
VDEV Vertical Deviation
VEL Velocity
VENT Ventilation
VERT Vertical
VIB Vibration
VM Voltmeter
VOR.D VOR-DME
VR Rotation Speed
EFF :
ALL 00 -INTRO
Page 69
May 01/05
THY
-------------------------------------------------------------------------------
ABBREVATION SIGNIFICATION
-------------------------------------------------------------------------------
VSV Variable Stator Vane
W Weight
W White
WARN Warning
WD Warning Display
WHL Wheel
WPT Waypoint
X FEED Crossfeed
X-TALK Cross-Talk
XCVR Transceiver
EFF :
ALL 00 -INTRO
Page 70
May 01/05
THY
-------------------------------------------------------------------------------
ABBREVATION SIGNIFICATION
-------------------------------------------------------------------------------
XDCR Transducer
XFMR Transformer
XFR Transfer
XMSN Transmission
XMTR Transmitter
XPDR Transponder
Y Yellow
Z Zone
EFF :
ALL 00 -INTRO
Page 71
May 01/05
THY
15. ________________
Revision Service
A. General
The revision service is ensured on a regular basis. Before incorporating
a revision, ensure that the previous revision has been incorporated and
recorded in the Record of Revision page.
The temporary revision (TR) service to this AMM will be issued as
necessary to alert the customer of configuration differences and to
provide temporary instructions prior to the next regular revision. Each
temporary revision will be normally incorporated into the AMM in the next
regular revision to the AMM.
B. Filing instructions
The filing instructions are given by means of two documents:
- Highlights (HL)
- List of Effective Pages (LEP)
The Highlights will provide the reason for the issue of pages or topics.
The LEP will provide the indication of the pages revised (R) to be
replaced, new pages (N) to be added or pages deleted (D) to be removed.
C. Revision indication
EFF :
ALL 00 -INTRO
Page 72
May 01/05
THY
(c) Deleted figure
A Revision code R is written in the margin, facing the blank
space left by the deletion of the cross-reference(s) to the
figure on the text page.
IMPORTANT:
EFF :
ALL 00 -INTRO
Page 73
May 01/05
THY
16. Specific
_______________________________________________
features for AMM in Airnav Environment
The AMM can also be accessed in the following digital format product
- Airnav (DVD)
The AMM data on paper and film cassette is basically the same as that
contained in digital format (PDF or former ADRES/CAATS product), however,
there are few specific features associated with the AirNav environment.
These specific features are:
(1) Highlights
Highlights are provided at the front of the AMM document (and not at
chapter level). A reference column is listing the page block or the
task/subtasks which have been modified at the revision. An hyperlink
function is implemented to switch directly from highlights to revised
data within the AMM and vice versa.
EFF :
ALL 00 -INTRO
Page 74
May 01/05
THY
B. Preliminary pages at Chapter level
C. Revision Service
EFF :
ALL 00 -INTRO
Page 75
May 01/05
THY
17. Power
____________________
Plant Chapters
Engine manufacturer data has been combined with Airbus information and are
included in AMM.
(1) General
(a) This portion of the manual covers the maintenance that can be
performed while the engine is installed on the aircraft.
It is recommended that operators avoid performing maintenance on
multiple engines installed on the same aircraft at the same time
if at all possible.
If it is not possible to avoid maintenance on more than one
engine at the same time, it is recommended that different
maintenance teams service each engine.
(b) Data related to line maintenance of the engine and its subsequent
ground handling cover the following points:
1
_ Servicing
2
_ Fault Isolation (Refer to the Trouble Shooting Manual)
3
_ Controlling parameters and acceptable operation limits.
4
_ Replacement, inspection, adjustment and test of Line
Replaceable Units (LRUs).
EFF :
ALL 00 -INTRO
Page 76
May 01/05
THY
(e) Observe standard shop practice safety procedures and
precautionary measures at all times to avoid damage to equipment
or injury to personnel.
(g) Where required the data are completed by Nacelle and Airframe
information.
------------------------------------------------------------------------------
CHAPTER CHAPTER
NUMBER CHAPTER DESIGNATION NUMBER CHAPTER DESIGNATION
------------------------------------------------------------------------------
06 Dimensions and Areas 70 Standard Practices - Engines
11 Placards and Markings 71 Power Plant
12 Servicing 72 Engine
23 Communications 73 Engine Fuel and Control
24 Electrical Power 74 Ignition
26 Fire Protection 75 Air
29 Hydraulic Power 76 Engine Controls
30 Ice and Rain Protection 77 Engine Indicating
36 Pneumatic 78 Exhaust
54 Nacelles/Pylons 79 Oil
80 Starting
EFF :
ALL 00 -INTRO
Page 77
Feb 01/06
THY
(b) Engine Illustrated Parts Catalog (EIPC)
1
_ The Illustrated Parts Catalog lists and illustrates all parts
and assemblies of the engine. It is intended only for
requisitioning, storing, issuing, and identifying parts and
for illustrating relationship for disassembly, where
applicable. It is not to be used as the authority for
procedures of assembly or disassembly.
2
_ The catalog is also a historical record of parts used,
superseded, and/or discontinued.
R
EFF :
001-049, 201-249, 251-299, 901-901, 00 -INTRO
Page 78
Feb 01/06
THY
(a) Engine Shop Manual (ESM)
1
_ The Engine Shop Manual presents detailed information required
to support the engine at shop level.
2
_ Inspection, repair procedures, testing and trouble-shooting
comprise the major portion of this publication. Description of
the engine sections, and components, are included to
familiarize personnel with the terminology and physical
appearance of the various components.
1
_ The Component Manuals contain detailed maintenance or overhaul
instructions for the accessories furnished on the engine.
2
_ The manuals cover disassembly, cleaning, inspection, approved
repairs and repair methods, assembly and testing of the
accessories. The manuals also include an Illustrated Parts
Catalog for each of these accessories.
R
EFF :
001-049, 201-249, 251-299, 901-901, 00 -INTRO
Page 79
Feb 01/06
THY
R **ON A/C 051-199, 301-399,
(a) The publications listed as follows are connected to and used with
this manual:
1
_ Propulsion System Operating Instructions (Refer to Flight Crew
Operating Manual).
2
_ There is no Power Plant Illustrated Parts Catalog (PPIPC) for
IAE engine. All data are covered in the Airframe IPC (AIPC).
3
_ Illustrated Tool and Equipment Manual (Refer to Illustrated
Tool and Equipment Manual) - The Illustrated Tool and
Equipment Manual gives data on the special tools and equipment
necessary for the engine. The tools and equipment are
illustrated together with a description of purpose and usage.
4
_ Non-Destructive Test Manual (Refer to NDT).
5
_ Engine Manual - The engine manual does not relate directly to
the on-aircraft maintenance of the engine, but it does contain
the data necessary for work to be completed on an engine in
the workshop.
6
_ IAE - Component Maintenance Manuals - These four manuals
(Tubes/Hoses/Ducts, Miscellaneous Mechanical, Electrical
Harness and Cables, Fuel Nozzle and Support) are related to
the Engine Manual and contain data for work to be accomplished
in the workshop.
7
_ Wiring Data (Refer to AWM) - The Aircraft Wiring Manual
provides data necessary for support of the various electrical
cables and harnesses that are installed on the Propulsion
System.
8
_ Vendor Component Maintenance Manuals - The various Vendor
Component Maintenance Manuals, which cover the proprietary
components/accessories that are installed in the Propulsion
System, contain data for work to be accomplished in the
workshop. A complete listing of these Vendor Component
Maintenance Manuals is contained in the: Technical
Publications Index and List of Overhaulable Components
(TPI/LOC).
R
EFF :
051-199, 301-399, 00 -INTRO
Page 80
Aug 01/06
THY
9
_ Engine/Nacelle Service Bulletins - Engine Service Bulletins
and Nacelle Service Bulletins are issued to provide
instructions for the advancement of a configuration or for the
accomplishment of a one-time inspection, etc.
(a) All the engine consumable products are included in the chapter
70-30-00. A * symbol indicates that no national reference for
material is available.
18. Effectivity
_________________
Table
The aircraft identified by an AIRBUS Manufacturer Serial Number (MSN) in
the effectivity table are covered in this current AMM issue.
NOTE : The standard number and version rank may be useful when
____
consulting/using the SRM and/or the aircraft drawing set.
EFF :
ALL 00 -INTRO
Page 81
Nov 01/05
THY
-------------------------------------------------------------------------------
VER |RESTRICT.| MODEL | STD | ENGINE | OPERATOR
| EFFECT. | | | |
-------------------------------------------------------------------------------
AIH03 0251-0251 321-211 ST2 56-5-B3 TURK HAVA YOLLARI
BMA01 0301-0302 321-231 ST2 V2533A5 TURK HAVA YOLLARI
G4I01 0901-0901 319-115 ST3 56-5-B7 TURK HAVA YOLLARI
G8E04 0252-0299 321-211 ST2 56-5-B3 TURK HAVA YOLLARI
IBE03 0007-0007 320-214 ST1 56-5-B4 TURK HAVA YOLLARI
I3L03 0101-0199 319-132 ST3 V2524A5 TURK HAVA YOLLARI
SAB03 0008-0008 320-214 ST1 56-5-B4 TURK HAVA YOLLARI
SWR01 0201-0249 321-111 ST2 56-5-B1 TURK HAVA YOLLARI
SWR02 0001-0006 320-214 ST1 56-5-B4 TURK HAVA YOLLARI
S2A05 0051-0053 320-232 ST1 V2527A5 TURK HAVA YOLLARI
S2A06 0009-0049 320-214 ST1 56-5-B4 TURK HAVA YOLLARI
THY01 0054-0100 320-232 ST1 V2527A5 TURK HAVA YOLLARI
THY02 0303-0399 321-231 ST2 V2533A5 TURK HAVA YOLLARI
-------------------------------------------------------------------------------
AIRLINE |CUSTOMER FLEET| VERSION | MODEL | MSN | REGISTRATION
| SERIAL NUMBER| RANK | | |
-------------------------------------------------------------------------------
THY 0001 SWR02 0002 320-214 0545 TC-JLA
THY 0002 SWR02 0004 320-214 0553 TC-JLH
THY 0003 SWR02 0005 320-214 0559 TC-JLI
THY 0004 SWR02 0006 320-214 0562 TC-JLB
THY 0005 SWR02 0007 320-214 0566 TC-JLC
THY 0006 SWR02 0008 320-214 0574 TC-JLD
THY 0007 IBE03 0001 320-214 0992 TC-JLE
THY 0008 SAB03 0001 320-214 1054 TC-JLG
THY 0009 S2A06 0001 320-214 1413 TC-JLF
THY 0051 S2A05 0002 320-232 1856 TC-JLJ
THY 0052 S2A05 0004 320-232 1909 TC-JLK
THY 0053 S2A05 0008 320-232 1996 TC-JLL
THY 0054 THY01 0001 320-232 2609 TC-JPA
THY 0055 THY01 0002 320-232 2626 TC-JPB
THY 0056 THY01 0003 320-232 2928 TC-JPC
THY 0057 THY01 0004 320-232 2934 TC-JPD
R THY 0058 THY01 0005 320-232 2941 TC-JPE
R THY 0059 THY01 0006 320-232 2984 TC-JPF
THY 0060 THY01 0007 320-232 3010
THY 0101 I3L03 0001 319-132 2738 TC-JLM
THY 0102 I3L03 0002 319-132 2739 TC-JLN
THY 0201 SWR01 0006 321-111 0541 TC-JMB
THY 0202 SWR01 0004 321-111 0522 TC-JMA
EFF :
ALL 00 -INTRO
Page 82
Nov 01/06
THY
-------------------------------------------------------------------------------
AIRLINE |CUSTOMER FLEET| VERSION | MODEL | MSN | REGISTRATION
| SERIAL NUMBER| RANK | | |
-------------------------------------------------------------------------------
THY 0251 AIH03 0004 321-211 2060 TC-JMG
THY 0252 G8E04 0002 321-211 1233 TC-JMF
THY 0253 G8E04 0001 321-211 1219 TC-JME
THY 0301 BMA01 0002 321-231 0810 TC-JMD
THY 0302 BMA01 0001 321-231 0806 TC-JMC
THY 0303 THY02 0001 321-231 2823 TC-JRA
THY 0304 THY02 0002 321-231 2868 TC-JRB
THY 0305 THY02 0003 321-231 2999
THY 0306 THY02 0004 321-231 3015
R THY 0307 THY02 0005 321-231 3126
THY 0901 G4I01 0001 319-115 1002 TC-ANA
EFF :
ALL 00 -INTRO
Page 83
Nov 01/06
THY