The document provides installation instructions for an EECU module, including pin assignments for power, vehicle weight, CAN Low, and CAN High connections and steps to turn off ignition, connect the module to the OBD2 connector, and ground and power connections before turning ignition back on and checking the AdBlue level display.
The document provides installation instructions for an EECU module, including pin assignments for power, vehicle weight, CAN Low, and CAN High connections and steps to turn off ignition, connect the module to the OBD2 connector, and ground and power connections before turning ignition back on and checking the AdBlue level display.
The document provides installation instructions for an EECU module, including pin assignments for power, vehicle weight, CAN Low, and CAN High connections and steps to turn off ignition, connect the module to the OBD2 connector, and ground and power connections before turning ignition back on and checking the AdBlue level display.
- Red with green stripe - power + 24V (car terminal 15)
- Black with white stripe - vehicle weight (terminal 31)
- Blue with black stripe - CAN Low (CAN bus low)
- Yellow with blue stripe - CAN High (CAN bus high)
How to install the module.
- Turn off the ignition
- If the SCR system worked, it is necessary to wait for the completion of all processes - Remove the OBD2 connector from the bracket to have access to the wire connector - Connect the module to the connector OBD2
4 Ground black with white stripe
6 CAN High yellow with blue stripe 14 CAN Low blue with black stripe
- Find plus (terminal 15) at the place of installation.
- For the FORD Cargo: remove fuses from the terminals 15 and 30 Клемма 30
Клемма 15
- Turn on the ignition and check that the level AdBlue shows 50% or 70%. - If necessary remove errors.