- Red with green stripe - power + 24V (car terminal 15)
- Black with white stripe - vehicle weight (terminal 31)
- Blue with black stripe - CAN Low (CAN bus low)
- Yellow with blue stripe - CAN High (CAN bus high)
How to install the module.
- Turn off the ignition
- If the SCR system worked, it is necessary to wait for the completion of all processes - Remove the OBD2 connector from the bracket to have access to the wire connector - Connect the module to the connector OBD2
4 Ground black with white stripe
6 CAN High yellow with blue stripe 14 CAN Low blue with black stripe
- Find plus (terminal 15) at the place of installation.
- For the FORD Cargo: remove fuses from the terminals 15 and 30 Клемма 30
Клемма 15
- Turn on the ignition and check that the level AdBlue shows 50% or 70%. - If necessary remove errors.