Professional Documents
Culture Documents
DNVGL Ru Ship Pt1ch3
DNVGL Ru Ship Pt1ch3
Ships
Edition July 2019
The content of this service document is the subject of intellectual property rights reserved by DNV GL AS ("DNV GL"). The user
accepts that it is prohibited by anyone else but DNV GL and/or its licensees to offer and/or perform classification, certification
and/or verification services, including the issuance of certificates and/or declarations of conformity, wholly or partly, on the
basis of and/or pursuant to this document whether free of charge or chargeable, without DNV GL's prior written consent.
DNV GL is not responsible for the consequences arising from any use of this document by others.
DNV GL AS
FOREWORD
DNV GL rules for classification contain procedural and technical requirements related to obtaining
and retaining a class certificate. The rules represent all requirements adopted by the Society as
basis for classification.
This service document has been prepared based on available knowledge, technology and/or information at the time of issuance of this
document. The use of this document by others than DNV GL is at the user's sole risk. Unless otherwise stated in an applicable contract,
or following from mandatory law, the liability of DNV GL AS, its parent companies and subsidiaries as well as their officers, directors and
employees ("DNV GL") for proved loss or damage arising from or in connection with any act or omission of DNV GL, whether in contract or in
tort (including negligence), shall be limited to direct losses and under any circumstance be limited to 300,000 USD.
CHANGES – CURRENT
Editorial corrections
In addition to the above stated changes, editorial corrections may have been made.
Rules for classification: Ships — DNVGL-RU-SHIP Pt.1 Ch.3. Edition July 2019 Page 3
Documentation and certification requirements, general
DNV GL AS
CONTENTS
Section 1 General.................................................................................................... 5
1 General................................................................................................ 5
Changes – historic.................................................................................................. 6
Rules for classification: Ships — DNVGL-RU-SHIP Pt.1 Ch.3. Edition July 2019 Page 4
Documentation and certification requirements, general
DNV GL AS
SECTION 1 GENERAL
Rules for classification: Ships — DNVGL-RU-SHIP Pt.1 Ch.3. Edition July 2019 Page 5
Documentation and certification requirements, general
DNV GL AS
CHANGES – HISTORIC
Additional definition of Sec.1 Definitions of the concepts related to targets, activity methods,
concepts standards, lifecycle phases and authorization.
Additional revised description
Sec.2 The process for handling of documentation has been further
related to handling of
specified.
documentation
Revise definition of Sec.3 [2] Revised documentation types for non-destructive testing and
documentation types new documentation types for construction monitoring and for
permanent magnet machines.
Revise compliance document Sec.5 New compliance document: Type approval design certificate
types for components (TADC). New product test report (PTR) and material test report
(MTR) replacing previous test report (TR).
NDT procedures to be Sec.3 [2] The documentation type H135 - Non-destructive testing (NDT)
approved procedure has been added.
• General
— Sec.3 [2]: Editorial changes to the documentation types - G040, I080, I140, T060, Z261, Z262, Z263,
Z264, Z266 and new documentation type S170 - Ship energy efficiency management plan (SEEMP), is
introduced.
Rules for classification: Ships — DNVGL-RU-SHIP Pt.1 Ch.3. Edition July 2019 Page 6
Documentation and certification requirements, general
DNV GL AS
Part 1 Chapter 3 Changes – historic
July 2016 edition
This document supersedes the October 2015 edition.
• General
— Only editorial corrections have been made.
Rules for classification: Ships — DNVGL-RU-SHIP Pt.1 Ch.3. Edition July 2019 Page 7
Documentation and certification requirements, general
DNV GL AS
About DNV GL
DNV GL is a global quality assurance and risk management company. Driven by our purpose of
safeguarding life, property and the environment, we enable our customers to advance the safety
and sustainability of their business. We provide classification, technical assurance, software and
independent expert advisory services to the maritime, oil & gas, power and renewables industries.
We also provide certification, supply chain and data management services to customers across a
wide range of industries. Operating in more than 100 countries, our experts are dedicated to helping
customers make the world safer, smarter and greener.