Professional Documents
Culture Documents
Probar Flowmeter: Product Data Sheet 00813-0100-4761 Ds-4010
Probar Flowmeter: Product Data Sheet 00813-0100-4761 Ds-4010
ProBar® Flowmeter
WHEN COMPARED WITH TRADITIONAL
DP FLOW MEASUREMENT, THE
PROBAR FLOWMETER OFFERS
GREATER VALUE AND PERFORMANCE
HIGH PERFORMANCE
• ±0.5% of rate reference accuracy
• 10:1 flow turndown
• Liquids
• Gases and steam (Consult Factory)
ProBar®
• 4—20mA and HART® flow outputs
REDUCED INSTALLATION COSTS
• Installation time reduced by 90%
• Fugitive emission points reduced by 80%
• NEW 2-line scalable display
REDUCED OPERATING COSTS
• Significantly lower pressure drop than
orifice or vortex meters
• Low operating costs
• Low maintenance costs
HIGH RELIABILITY
• ISO 9001 company
• NIST Traceable Calibration
Flow-247
ProBar® Flowmeter
PROBAR
FLOWMETER
PROBAR FLOWMETER- - - - - - - - - - - - - - - - - - - - - - - - - - 251
REINVENTING DP FLOW MEASUREMENT - - - - - - - - - - - - - 251
Per fo rm a nc e
THE PROBAR FLOWMETER - - - - - - - - - - - - - - - - - - - - - - 252
B e ne fits
LOW INSTALLATION COSTS - - - - - - - - - - - - - - - - - - - - - - 254
LOW OPERATING COSTS - - - - - - - - - - - - - - - - - - - - - - - - 255
ProBar®
F e atu re s
FEATURE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 256
BENEFIT- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 256
I n s tal l at i on
( Fo l l ow th e P I PE S P l a n for Q ua l i t y I n s tal lat ion .)
PIPE ORIENTATION - - - - - - - - - - - - - - - - - - - - - - - - - - - 257
INSIDE PIPE DIAMETER (ID) - - - - - - - - - - - - - - - - - - - - - 257
PIPE PENETRATION - - - - - - - - - - - - - - - - - - - - - - - - - - - 257
ELECTRONIC MOUNTING - - - - - - - - - - - - - - - - - - - - - - - 258
STRAIGHT RUN - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 258
S iz ing a nd H ow To Ord er
1. CHOOSE A MOUNTING METHOD - - - - - - - - - - - - - - - - - 259
2. CHOOSE A SENSOR SIZE - - - - - - - - - - - - - - - - - - - - - - 260
3. VERIFY MODEL AND SENSOR SIZE - - - - - - - - - - - - - - - 261
4. CHOOSE THE M ODEL OOPTIONS - - - - - - - - - - - - - - - - - 263
5. VERIFY PROCESS AND PIPE INFORMATION - - - - - - - - - - 264
Flow-248
Rosemount Inc.
PROBAR
FLOWMETER
O rde ri n g I n fo rm a ti o n— Mo d el PB R
MODEL PBR+15S/16S - - - - - - - - - - - - - - - - - - - - - - - - - 265
MODEL PBR+25S/26S - - - - - - - - - - - - - - - - - - - - - - - - - 267
MODEL PBR+35S/36S - - - - - - - - - - - - - - - - - - - - - - - - - 270
MODEL PBR+45S/46S - - - - - - - - - - - - - - - - - - - - - - - - - 273
O rde ri n g I n fo rm a ti o n— Mo d el PB F
MODEL PBF+15S/16S - - - - - - - - - - - - - - - - - - - - - - - - - 281
MODEL PBF+25S/26S - - - - - - - - - - - - - - - - - - - - - - - - - 284
MODEL PBF+25H/26H - - - - - - - - - - - - - - - - - - - - - - - - 287
MODEL PBF+35S/36S - - - - - - - - - - - - - - - - - - - - - - - - - 293
ProBar®
MODEL PBF+45S/46S - - - - - - - - - - - - - - - - - - - - - - - - - 296
MODEL PBF+45H/46H - - - - - - - - - - - - - - - - - - - - - - - - 299
MODEL PBF+45M/46M - - - - - - - - - - - - - - - - - - - - - - - - 302
O rde ri n g I n fo rm a ti o n— Mo d el PN T
MODEL PNT+10S - - - - - - - - - - - - - - - - - - - - - - - - - - - - 310
O rde ri n g I n fo rm a ti o n— Mo d el PN F
MODEL PNF+10S - - - - - - - - - - - - - - - - - - - - - - - - - - - - 312
MODEL PNF+10H - - - - - - - - - - - - - - - - - - - - - - - - - - - - 314
MODEL PNF+10M - - - - - - - - - - - - - - - - - - - - - - - - - - - 316
O rde ri n g I n fo rm a ti o n— Mo d el PN W
MODEL PNW+10S - - - - - - - - - - - - - - - - - - - - - - - - - - - 318
O rde ri n g I n fo rm a ti o n— Mo d el PH T
MODEL PHT+15S - - - - - - - - - - - - - - - - - - - - - - - - - - - - 325
MODEL PHT+25S - - - - - - - - - - - - - - - - - - - - - - - - - - - - 328
MODEL PHT+35S - - - - - - - - - - - - - - - - - - - - - - - - - - - - 331
O rde ri n g I n fo rm a ti o n— Mo d el PH F
MODEL PHF+15S - - - - - - - - - - - - - - - - - - - - - - - - - - - - 340
MODEL PHF+25S - - - - - - - - - - - - - - - - - - - - - - - - - - - - 343
MODEL PHF+25H - - - - - - - - - - - - - - - - - - - - - - - - - - - - 346
MODEL PHF+25M - - - - - - - - - - - - - - - - - - - - - - - - - - - 349
MODEL PHF+35S - - - - - - - - - - - - - - - - - - - - - - - - - - - - 352
MODEL PHF+45S - - - - - - - - - - - - - - - - - - - - - - - - - - - - 355
MODEL PHF+45H - - - - - - - - - - - - - - - - - - - - - - - - - - - - 358
MODEL PHF+45M - - - - - - - - - - - - - - - - - - - - - - - - - - - 361
S p ec i fi c a ti o ns
FUNCTIONAL SPECIFICATIONS - - - - - - - - - - - - - - - - - - - - 371
PERFORMANCE SPECIFICATIONS- - - - - - - - - - - - - - - - - - - 372
PHYSICAL SPECIFICATIONS - - - - - - - - - - - - - - - - - - - - - - 373
SENSOR - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 373
Flow-249
ProBar® Flowmeter
ProBar®®
Flow-250
Rosemount Inc.
PROBAR®
Flowmeter
ProBar®
PROBAR FLOWMETER Dieterich Standard, Inc. has REINVENTING DP
joined with Rosemount Inc. to FLOW MEASUREMENT
The ProBar flowmeter is a provide the latest technology in
highly accurate insertion DP flow solutions. Rosemount Inc. By combining integrated
flowmeter. It measures is the technology leader in electronics with insertion
volumetric flow rate for liquids, offering the highest performance flowmeter technology, the
gases, and steam in line sizes and highest quality in DP ProBar flowmeter provides the
from ½-inch to 72 inches. With transmitters. The 3051CD™ lowest total cost of any precision
fully integrated Rosemount® provides 0.075% accuracy, 100:1 flowmeter. Installation costs are
electronics and the Annubar® rangeability, and the best stability reduced by insertion through a
sensor, the ProBar flowmeter of any industrial transmitter. In small tap into existing piping,
provides a ±0.5% of rate the years since its introduction, and no plumbing is required
reference accuracy over a the 3051CD has become the new between the electronics and the
10:1 flow turndown. By fully standard in DP sensing sensing element. Due to the
calibrating the integral ProBar technology. aerodynamic shape of the
flowmeter, Dieterich Standard, sensing element, the ProBar
Inc. has eliminated the “percent As a member of the Rosemount flowmeter provides low
of full scale” accuracy and Inc. team, Dieterich Standard, operating costs. In addition, the
turndown limitations associated Inc. combines 3051CD based sensor is insensitive to wrap,
with differential pressure electronics with the latest in wear, and plugging. When
(DP) technology. DP primary technology— compared with traditional DP
Diamond II+ Annubar primary flow measurement, the ProBar
flow element. flowmeter offers greater value
and performance. Together,
Dieterich Standard, Inc. and
Rosemount Inc. are reinventing
DP flow measurement.
Flow-251
ProBar® Flowmeter
Performance
2 2
V1
---------- + P1
------- = V2
---------- + P2
-------
2gc ρ 2gc ρ
Flow-252252
Rosemount Inc.
Integrated 1
manifold for 2
F l ow Tu rn do wn
isolation and
calibration
3
4
ProBar®
5
Test Data
The ProBar flowmeter calibration process provides
an actual calibration test record that shows the
ProBar flowmeter maintains +0.5% accuracy over a
10:1 flow turndown at reference conditions. Each
ProBar flowmeter comes with a certified NIST
traceable report that shows the results from the
Dieterich Standard, Inc. flow laboratory.
Flow-253
ProBar® Flowmeter
Benefits
Transmitter
Manifold, valves & bracket
Weld (mounting)
Fittings & Tubing
Wiring
Start-up (Cal/Config)
ProBar Flowmeter
Vortex
Orifice
Traditional DP ProBar Flowmeter
Installation FIGURE 9. Installation Cost Comparison.
Installation
Ref: 6”SCH40, 100# Steam, 11,300PPH
Flow-254254
Rosemount Inc.
Low Permanent Pressure Loss The ProBar flowmeter sensor shape is designed to
prevent wear and plugging that could affect
The ProBar flowmeter has the lowest pressure drop calibration. The electronics are the most stable in
and operating cost of any DP or vortex flowmeter. the industry and will not drift outside of the total
The aerodynamic shape of the ProBar flowmeter performance specification. Recalibration should not
does not restrict the flow like the bluff body of a be required in a five-year period, providing
vortex shedder or the restrictive opening of an significant savings in maintenance costs.
orifice plate.
ProBar®
FIGURE 13. Non-plug design.
Reliability
• ISO 9001 certified
ÿþýüýýý
ÿüýýý
ÿþüýýý
ÿý
ÿþý
4” 8” 12” 14”
(100mm) (200mm) (300mm) (400mm)
ProBar Flowmeter
Vortex
Orifice
Flow-255
ProBar® Flowmeter
Features
FEATURE BENEFIT
Integral RTD Integrated Electronics Mounting
Flow-256
Rosemount Inc.
The performance of any flow measurement device INSIDE PIPE DIAMETER (ID)
depends greatly upon the quality of the installation.
This is also true for ProBar flowmeter. Studies have It is important to use the exact pipe ID in ProBar
shown that greater than 70% of flow measurement flowmeter installations to avoid flow measurement
problems are traceable to installation error. errors. Throat diameter is a squared factor for
Installation of ProBar flowmeter is very simple, but DP flow measurement devices. With the ProBar
attention must be paid to simple principles. These flowmeter, the pipe itself forms the throat. Using
principles are common to all DP devices and most the pipe as the throat of the meter reduces
flowmeters in general. The Dieterich Standard, Inc. permanent pressure loss and the effect of wear
acronym for these principles is “PIPES”: on the throat.
Pipe orientation
2
Flow = CD DP
Inside diameter
ProBar®
Pipe penetration
Electronics mounting
Straight run
PIPE ORIENTATION
The sensor must be installed in the proper
orientation relative to the pipe and the FIGURE 22. Pipe ID.
fluid measured. This must be specified at
the time of order placement. For gases, PIPE PENETRATION
the electronics must be mounted above the
pipe. For liquid and steam, the electronics The sensor mounting hole must be smooth and
must be mounted below the pipe. See the the correct size to avoid disturbing the flow profile.
I/O manual for detailed installation instructions. Drilling is the only acceptable method to properly
prepare the mounting hole. See hole size
recommendations in the manual 00809-0100-4761.
Preferred
Location
þý þý
Mounting
þý þý
ÿþý
Flow-257
257
ProBar® Flowmeter
After an elbow 8 10
ProBar®
After an expansion 8 18
After a constriction 8 12
Flow-258
Rosemount Inc.
ProBar®
Mounting Method Flanged.
Threaded Pak–Lok. Pipe Sizes
Pipe Sizes 2 in. to 72 in. (50 mm to 1800 mm).
2 in. to 72 in.(50 mm to 1800 mm).
PHF PHT
FIGURE 29. Flanged In–Line. FIGURE 30. Threaded In-Line. FIGURE 31. Butt Weld In-Line.
Mounting Method Mounting Method Mounting Method
Flanged In–Line. Threaded In–Line. Butt Weld In–Line.
Pipe Sizes Pipe Sizes Pipe Sizes
½ in. to 2 in. (25 mm to 50 mm). ½ in. to 2 in. (25 mm to 50 mm). ½ in. to 2 in. (25 mm to 50 mm).
Flow-259
ProBar® Flowmeter
Pf
35.302 × --------------------------- xACFM
( T f + 460 )
Pf = Flowing pressure (psia)
Tf = Flowing temperature (°F)
( T + 460°F )
f
ACFM × ----------------------------------- × SCFM
( P f × 35.302 )
3
GPM × DensityofLiquid ( lb ⁄ ft )
PPM = ----------------------------------------------------------------------------------------------
7.48
lb ⁄ hr × 2.205 = kg ⁄ hr
3 SCFH
NM H = ------------------
35.37
Flow-260
Rosemount Inc.
Nom. Sensor 10
pipe
PNT PNF PNW
size (in
inches)
SCFM hw GPM SCFM hw GPM SCFM hw GPM
.5 180.52 1500 50.943 180.52 1500 50.943 180.52 1500 50.943
.75 307.79 1500 89.404 307.79 1500 89.404 307.79 1500 89.404
1 498.82 1500 144.9 498.82 1500 144.9 498.82 1500 144.9
1.25 765.68 1180 222.41 765.68 1180 222.41 765.68 1180 222.41
1.5 902.04 884 262.02 902.04 884 262.02 902.04 884 262.02
2 1174.9 552 341.28 1174.9 552 341.28 1174.9 552 341.28
ProBar®
Sensor 15 Sensor 16
Sensor 25 Sensor 26
Flow-261
ProBar® Flowmeter
36 118650 56 31613 58452 13.2 15348 125830 63.3 33611 118650 56 31613 151120 93.2 40783
42 141020 41.8 37402 69564 9.95 18248 148640 46.6 39491 141020 41.8 37402 181070 70.3 48505
48 163400 32.4 43205 80662 7.76 21144 171330 35.7 45353 163400 32.4 43205 211020 54.9 56240
60 208140 21.1 54825 102920 5.1 26954 216230 22.8 56991 206140 21.1 54825 270800 36.1 71712
72 253470 14.9 66623 125280 3.61 32793 261750 15.9 68822 253470 14.9 66623 330970 25.6 87327
Sensor 45 Sensor 46
PBR PBF PHF PBR PBF
SCFM hw GPM SCFM hw GPM SCFM hw GPM SCFM hw GPM SCFM hw GPM
10 41878 1270 12165 20133 256 5461.5 45513 1500 13220 41878 1270 12165 45513 1500 13220
12 51142 940 14855 24994 195 6766.1 59210 1260 17199 51142 940 14855 61288 1350 17803
14 56913 797 16532 28092 168 7590.1 65325 1050 18975 56913 797 16532 68661 1160 19944
16 66100 630 19200 33012 135 8888.1 74858 808 21744 66100 630 19200 80698 939 23441
18 75353 511 21888 38019 111 10201 84461 642 24539 75353 511 21888 92738 774 26938
20 85108 422 24722 43418 93.2 11618 94565 521 27469 85108 422 24722 105460 648 30634
24 106480 303 30297 53975 68.2 14374 114620 364 33207 106480 303 30291 130590 475 37933
30 146170 194 40515 73415 44.7 19448 156190 226 43729 146170 194 40515 178800 313 51462
36 181760 138 49627 90648 32.1 23938 192700 157 52933 181760 138 49627 226020 226 63508
42 217210 103 58712 108240 24.3 28517 229510 116 62307 217210 103 58712 273660 171 75649
48 251110 78.8 67379 125770 19 33086 265390 88.6 71446 251110 78.8 67379 321370 134 87865
60 321930 51.5 85653 160730 12.5 42190 337470 56.8 89952 321930 51.5 85653 416410 88.4 112220
72 392880 36.3 103990 195900 8.86 51374 408770 39.4 108340 392800 36.3 103990 511830 62.8 136780
hw= maximum differential pressure in inches of water column. ½ in. to 24 in. Sch 40
SCFM = maximum air flow in standard cubic feet per minute 30 in. to 42 in. Sch Std.
GPM = maximum water flow in gallons per minute 48 in. to 72 in. Actual I.D.
At standard conditions: Air — 60 °F at 14.73 psia
Water — 60 °F, specific gravity 1.0, viscosity 1.12 centipoise
Flow-262
Rosemount Inc.
ProBar®
Line Sizes—2 in. and larger
PNT+10S ProBar® + Flowmeter—In-Line Threaded, SST page 310
PNF+10S ProBar® + Flowmeter—In-Line Flanged, SST page 312
®
PNF+10H ProBar + Flowmeter—In-Line Flanged, Hastelloy-C page 314
PNF+10M ProBar® + Flowmeter—In-Line Flanged, Monel page 316
PNW+10S ProBar® + Flowmeter—In-Line Butt Weld, SST page 318
Line Sizes—½ in. to 2 in.
PHT+15S ProBar® + Flowmeter—Threaded Flo-Tap, SST page 325
PHT+25S ProBar® + Flowmeter—Threaded Flo-Tap, SST page 328
PHT+35S ProBar® + Flowmeter—Threaded Flo-Tap, SST page 331
PHF+15S ProBar® + Flowmeter—Flanged Flo-Tap, SST page 340
®
PHF+25S ProBar + Flowmeter—Flanged Flo-Tap, SST page 343
PHF+25M ProBar® + Flowmeter—Flanged Flo-Tap, Monel page 349
PHF+35S ProBar® + Flowmeter—Flanged Flo-Tap, SST page 352
PHF+45S ProBar® + Flowmeter—Flanged Flo-Tap, SST page 355
PHF+45H ProBar® + Flowmeter—Flanged Flo-Tap, Hastelloy-C page 358
PHF+45M ProBar® + Flowmeter—Flanged Flo-Tap, Monel page 361
Flow-263
ProBar® Flowmeter
Dimension Codes
Certain dimensions are critical to the fabrication of the primary flow element assembly. The following codes
can be specified in the model callout “string” and Dieterich Standard, Inc. will build the primary flow element
assembly to suit. If no dimension is specified, cataloged components will default to standard dimensions.
ODH ODV
ODH is the outside diameter of the pipe to the top of ODV is the outside diameter of the pipe to the top of
the ProBar head (Figure 25). If this dimension is the isolation valve (Figure 27). ODV applies to
specified for a flanged, Flo–Tap, or Regular model, Flo–Tap models only, and only when the customer
ProBar®
the neck of the primary flow element just below supplies some or all of the mounting hardware.
standard dimension can be considered a minimum.
This dimension does not apply to in–line sensors or
to Model 45S.
ODV
ODH
ProBar®
Remote Mount - Vertical Line
HPVS0 Parallel, Vertical Line, 1/2 in. Socket Weld Port, SST
HPVSS Parallel, Vertical Line, 1/2—14 NPT, SST
HV2S0 Axial, Vertical Line, 1/2—14 NPT, SST
HV2SS Axial, Vertical Line, 1/2 in. Socket Weld Port, SST
Code DP Ranges
Code Output
A 4–20 mA with Digital Signal based on HART
1 Silicone
2 Inert Fill
Flow-265
ProBar® Flowmeter
MODEL PBR+15S/16S
Code Housing Material
A Epoxy-Poly-Aluminum 1/2—14 NPT
B Epoxy-Poly-Aluminum CM20
C Epoxy-Poly-Aluminum PG13.5
D Epoxy-Poly-Aluminum G1/2
J 316 SST 1/2—14 NPT
K 316 SST CM 20
L 316 SST PG 13.5
M Epoxy-Poly-Aluminum G1/2
Code Optional Auxiliary Mounting (Mounting Alternatives for use when Contoured Weld Fitting is Not Specified in Mounting Hardware)
MT2C Contoured Weld Fitting, 1/2—14 NPT, CS
MT2S Contoured Weld Fitting, 1/2—14 NPT, SST
ME2C Weld Coupling, 1/2—14 NPT, CS
ME2A Weld Coupling, 1/2—14 NPT, Aluminum
ME2K Weld Coupling, 1/2—14 NPT, Copper
ProBar®
Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, Explosion-Proof
Flow-266
Rosemount Inc.
MODEL PBR+25S/26S
Model Product Description
ProBar®
HADS0 Direct Mount, with 5-Valve Manifold, Horizontal Line, SST
HADSB Direct Mount, with 5-Valve Manifold, B31.1, Horizontal Line, SST
HADSN Direct Mount, with 5-Valve Manifold, NACE, Horizontal Line, SST
HAMS0 Integral, with 3-Valve Manifold, Horizontal Line, SST
HAPS0 Direct Mount, No Manifold, Horizontal Line, SST
Direct and Integral Mount Heads - Horizontal Line with RTD
HATS0 Integral, with 3-Valve Manifold, RTD, Horizontal Line, SST
HATSB Direct Mount, with 5-Valve Manifold, RTD,B31.1, Horizontal Line, SST
HATSD Direct Mount, with 5-Valve Manifold, RTD, Horizontal Line, SST
HATSN Direct Mount, with 5-Valve Manifold, RTD, NACE, Horizontal Line, SST
Direct and Integral Mount Heads - Vertical Line
HVDS0 Direct Mount, with 5-Valve Manifold, Vertical Line, SST
HVDSB Direct Mount, with 5-Valve Manifold, B31.1, Vertical Line, SST
HVDSN Direct Mount, with 5-Valve Manifold, NACE, Vertical Line, SST
HVMS0 Integral, with 3-Valve Manifold, Vertical Line, SST
HVPS0 Direct Mount, No Manifold, Vertical Line, SST
Direct and Integral Mount Heads - Vertical Line with RTD
HVDS0 Direct Mount, with 5-Valve Manifold, Vertical Line, SST
HVTSB Direct Mount, with 5-Valve Manifold, RTD, B31.1, Vertical Line, SST
HVTSD Direct Mount, with 5-Valve Manifold, RTD, Vertical Line, SST
HVTSN Direct Mount, with 5-Valve Manifold, RTD, NACE, Vertical Line, SST
Remote Mount - Horizontal Line
HA2S0 Axial, Horizontal Line, 1/2—14 NPT, SST
HA2SS Axial, Horizontal Line, 1/2 in. Socket Weld Port, SST
HP2S0 Parallel, Horizontal Line,1/2—14 NPT, SST
HP2SS Parallel, Horizontal Line, 1/2 in. Socket Weld Port, SST
Remote Mount - Vertical Line
HPVS0 Parallel, Vertical Line,1/2 in. Socket Weld Port, SST
HPVSS Parallel, Vertical Line,1/2—14 NPT, SST
HV2S0 Axial, Vertical Line, 1/2—14 NPT, SST
HV2SS Axial, Vertical Line, 1/2 in. Socket Weld Port, SST
Flow-267
ProBar® Flowmeter
MODEL PBR+25S/26S
Code Instrument Connections (Continued)
Gate Valve - SST
CB2S0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, SST
CB2SS Outside Stem and Yoke Gate Valve, Elbow, 1/2in. Socket Weld Port, SST
CC2S0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, SST
CC2SS Outside Stem and Yoke Gate Valve, Nipple, 1/2in. Socket Weld Port, SST
SB2S0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT,SST
SC2S0 Outside Stem and Yoke Gate Valve, Nipple and Tee, Steam, 1/2—14 NPT, SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee,1/2—14 NPT,SST
SV2SS Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2 in. Socket Weld Port, SST
Code DP Ranges
0 0-0.1 to 0-3 inH20 (.0-.15 to 0 - 0.75 kPa)
1 0-.5 to 0-25 inH20 (0-.12 to 0-6.22 kPa)
2 0-2.5 to 0-250 inH20 (0-.62 to 0 - 62.2kPa)
3 0-10 to 0-830 inH20 (0-2.48 to 0-206kPa)
ProBar®
Code Output
A 4–20 mA with Digital Signal based on HART
Code Optional Auxiliary Mounting (Mounting Alternatives for use when Contoured Weld Fitting is Not Specified in Mounting Hardware)
MT4C Contoured Weld Fitting, 1—11.5 NPT, CS
MT4S Contoured Weld Fitting, 1—11.5 NPT, SST
ME4C Weld Coupling, 1—11.5 NPT, CS
ME4A Weld Coupling, 1—11.5 NPT, Aluminum
ME4K Weld Coupling, 1—11.5 NPT, Copper
ME4P Weld Coupling, 1—11.5 NPT, PVC
ME4S Weld Coupling, 1—11.5 NPT, SST
NE40 Saddle, Double Strap, 3.74-4.55OD, 1—11.5 NPT, Iron
NF40 Saddle, Double Strap, 5.94-6.7in.OD,1—11.5 NPT, Iron
NG40 Saddle, Double Strap, 8.54-10.1OD,1—11.5 NPT, Iron
NH40 Saddle, Double Strap, 10.64-12.12,1—11.5 NPT, Iron
NJ40 Saddle, Double Strap, 12.6-14.3OD,1—11.5 NPT, Iron
Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
Flow-268
Rosemount Inc.
MODEL PBR+25S/26S
Code Optional Meters
1 LCD Meter (Rate) - Aluminum Housing
2 LCD Meter (Rate) - SST Housing
4 External LCD Rate and Total Display
ProBar®
S Lab Flow Calibration (Average K) (18 in. to 20 in.)
T Multipoint Flow Calibration (24 in.)
U Lab Flow Calibration (Average K) (24 in.)
V Multipoint Flow Calibration (30 in.)
W Lab Flow Calibration (Average K) (30 in.)
X Multipoint Flow Calibration (36 in.)
Y Lab Flow Calibration (Average K) (36 in.)
Flow-269
ProBar® Flowmeter
MODEL PBR+35S/36S
Model Product Description
PBR+35S ProBar® + Flowmeter - Regular
PBR+36S ProBar® + Flowmeter - Regular with Opposite Side Support
Eliminate Instrument Connection Options (For use with Direct and Integral Mount Head Styles)
C0000 Eliminate Instrument Connection Assembly
S0000 Eliminate Instrument Connection Assembly (Steam)
Needle Valve - CS
CA2C0 Needle Valve, Elbow, 1/2—14 NPT, CS
CP2C0 Needle Valve, Nipple, 1/2—14 NPT, CS
SA2C0 Needle Valve, Elbow and Tee, 1/2—14 NPT, CS
SP2C0 Needle Valve, Nipple and Tee, 1/2—14 NPT, CS
Needle Valve - SST
CA2S0 Needle Valve, Elbow, 1/2—14 NPT, SST
CA2SS Needle Valve, Elbow, 1/2 in. Socket Weld Port, SST
CP2S0 Needle Valve, Nipple, 1/2—14 NPT, SST
CP2SS Needle valve, Nipple, 1/2 in. Socket Weld Port, SST
SA2S0 Needle Valve, Elbow and Tee, 1/2—14 NPT, SST
SP2S0 Needle Valve, Nipple and Tee, 1/2—14 NPT, SST
SP2SS Needle Valve, Nipple and Tee, 1/2 in. Socket Weld Port, SST
Gate Valve - CS
CB2C0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, CS
CC2C0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, CS
SB2C0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, CS
SC2C0 Outside Stem and Yoke Gate Valve, Nipple and Tee, 1/2—14 NPT, CS
SV2C0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, CS
Flow-270
Rosemount Inc.
MODEL PBR+35S/36S
Code Instrument Connections (Continued)
Gate Valve - SST
CB2S0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, SST
CB2SS Outside Stem and Yoke Gate Valve, Elbow, 1/2 in. Socket Weld Port, SST
CC2S0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, SST
CC2SS Outside Stem and Yoke Gate Valve, Nipple, 1/2 in. Socket Weld Port, SST
SB2S0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, SST
SC2S0 Outside Stem and Yoke Gate Valve, Nipple and Tee, Steam,1/2—14 NPT, SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, SST
SV2SS Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2 in. Socket Weld Port, SST
Code DP Ranges
0 0-0.1 to 0-3 inH20 (.0-.15 to 0 - 0.75 kPa)
1 0-.5 to 0-25 inH20 (0-.12 to 0-6.22 kPa)
2 0-2.5 to 0-250 inH20 (0-.62 to 0 - 62.2kPa)
3 0-10 to 0-830 inH20 (0-2.48 to 0-206kPa)
ProBar®
Code Output
A 4—20 mA with Digital Signal based on HART
A Epoxy-Poly-Aluminum 1/2-14
B Epoxy-Poly-Aluminum CM20
C Epoxy-Poly-Aluminum PG13.5
D Epoxy-Poly-Aluminum G1/2
J 316 SST 1/2—14 NPT
K 316 SST CM 20
L 316 SST PG 13.5
M Epoxy-Poly-Aluminum G1/2
Code Optional Auxiliary Mounting (Mounting alternatives for use when Contoured Weld Fitting is Not Specified in Mounting Hardware)
MT6C Contoured Weld Fitting,11/2—11.5 NPT, CS
MT6S Contoured Weld Fitting,11/2—11.5 NPT, SST
Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
Flow-271
ProBar® Flowmeter
MODEL PBR+35S/36S
Code Optional Hazardous Location Certificates
I5 FM Intrinsic Safety Approval
C6 CSA Explosion-Proof and Intrinsic Safety Approval
E5 FM Explosion-Proof Approval
K5 FM Explosion-Proof and Intrinsic Safety Approval
ID KEMA/CENELEC Intrinsic Safety Approval
ED KEMA/CENELEC Explosion-Proof Approval
Flow-272
Rosemount Inc.
MODEL PBR+45S/46S
Model Product Descriptions
PBR+45S ProBar® + Flowmeter-Regular
PBR+46S ProBar® + Flowmeter-Regular with Opposite Side Support
ProBar®
HADSB Direct Mount, with 5-Valve Manifold, B31.1, Horizontal Line, SST
HADSN Direct Mount, with 5-Valve Manifold, NACE, Horizontal Line, SST
HAMS0 Integral, with 3-Valve Manifold, Horizontal Line, SST
HAPS0 Direct Mount, No Manifold, Horizontal Line, SST
Direct and Integral Mount Heads - Horizontal Line with RTD
HATS0 Integral, with 3-Valve Manifold, RTD, Horizontal Line, SST
HATSB Direct Mount, with 5-Valve Manifold, RTD, B31.1, Horizontal Line, SST
HATSD Direct Mount, with 5-Valve Manifold, RTD, Horizontal Line, SST
HATSN Direct Mount, with 5-Valve Manifold, RTD, NACE, Horizontal Line, SST
Direct and Integral Mount Heads - Vertical Line
HVDS0 Direct Mount, with 5-Valve Manifold, Vertical Line, SST
HVDSN Direct Mount, with 5-Valve Manifold, NACE, Vertical Line, SST
HVMS0 Integral, with 3-Valve Manifold, Vertical Line, SST
HVPS0 Direct Mount, No Manifold, Vertical Line, SST
HVTSB Direct Mount, with 5-Valve Manifold, RTD, B31.1, Vertical Line, SST
Direct and Integral Mount Heads - Vertical Line with RTD
HVTS0 Integral, with 3-Valve Manifold, RTD, Vertical Line, SST
HVTSB Direct Mount, with 5-Valve Manifold, RTD, B31.1, Vertical Line, SST
HVTSD Direct Mount, with 5-Valve Manifold, RTD, Vertical Line, SST
HVTSN Direct Mount, with 5-Valve Manifold, RTD, NACE, Vertical Line, SST
Remote Mount - Horizontal Line
HA2S0 Axial, Horizontal Line, 1/2—14 NPT, SST
HA2SS Axial, Horizontal Line, 1/2 in. Socket Weld Port, SST
HP2S0 Parallel, Horizontal Line, 1/2—14 NPT, SST
HP2SS Parallel, Horizontal Line,1/2 in. Socket Weld Port, SST
Remote Mount - Vertical Line
HPVS0 Parallel, Vertical Line,1/2 in. Socket Weld Port, SST
HPVSS Parallel, Vertical Line, 1/2—14 NPT, SST
HV2S0 Axial, Vertical Line, 1/2—14 NPT, SST
HV2SS Axial, Vertical Line, 1/2 in. Socket Weld Port, SST
Flow-273
ProBar® Flowmeter
MODEL PBR+45S/46S
Code Mounting Hardware
MPDC0 Pak-Lok, with Contoured Weld Fitting, 3—11.5 NPT, CS
MPDS0 Pak-Lok, with Contoured Weld Fitting, 3—11.5 NPT, SST
Code DP Ranges
Code Output
1 Silicone
2 Inert Fill
B Epoxy-Poly-Aluminum CM20
C Epoxy-Poly-Aluminum PG13.5
D Epoxy-Poly-Aluminum G1/2
J 316 SST 1/2—14 NPT
K 316 SST CM 20
L 316 SST PG 13.5
M Epoxy-Poly-Aluminum G1/2
Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, Explosion-Proof
TRA Integral RTD, Axial Head
TRP Integral RTD, Parallel Head
TXA Integral RTD, Explosion-Proof, Axial
TXP Integral RTD, Explosion-Proof, Parallel
Flow-274
Rosemount Inc.
MODEL PBR+45S/46S
Code Optional Calibration
L Multipoint Flow Calibration (ID ≤ 10 in.)
M Lab Flow Calibration (Average K) (<10 in.)
Z Special Calibration
N Multipoint Flow Calibration (12 in.)
P Multipoint Flow Calibration (14 in. to 16 in.)
O Lab Flow Calibration (Average K) (12 in.)
Q Lab Flow Calibration (Average K) (14 in. to 16 in.)
R Multipoint Flow Calibration (18 in. to 20 in.)
S Lab Flow Calibration (Average K) (18 in. to 20 in.)
T Multipoint Flow Calibration (24 in.)
U Lab Flow Calibration (Average K) (24 in.)
V Multipoint Flow Calibration (30 in.)
W Lab Flow Calibration (Average K) (30 in.)
X Multipoint Flow Calibration (36 in.)
Y Lab Flow Calibration (Average K) (36 in.)
ProBar®
QM2 ASTM Material-Traceable (Sensor Only)
QT1 Hydrostatic Test EP-4017
QT2 Dye Penetrant ES-1012
QT8 Extended Hydro EP-4046
Flow-275
ProBar® Flowmeter
ProBar®
276
Flow-276
Rosemount Inc.
ProBar®
Flow-277
ProBar® Flowmeter
ProBar®
278
Flow-278
Rosemount Inc.
ProBar®
Flow-279
ProBar® Flowmeter
ProBar®
280
Flow-280
Rosemount Inc.
ProBar®
Direct and Integral Mount Heads - Vertical Line
HVDS0 Direct Mount, with 5-Valve Manifold, Vertical Line, SST
HVDSB Direct Mount, 5-Valve Manifold, B31.1, Vertical Line, SST
HVDSN Direct Mount, 5-Valve Manifold, NACE, Vertical Line, SST
HVPS0 Direct Mount, No Manifold, Vertical Line, SST
HVMS0 Integral, 3-Valve Manifold, Vertical Line, SST
Remote Mount - Horizontal Line
HA2S0 Axial, Horizontal Line, 1/2—14 NPT, SST
HA2SS Axial, Horizontal Line, 1/2 in., Socket Weld Port, SST
HP2S0 Parallel, Horizontal Line, 1/2—14 NPT, SST
HP2SS Parallel, Horizontal Line, 1/2 in., Socket Weld Port, SST
Remote Mount - Vertical Line
HPVS0 Parallel, Vertical Line, 1/2 in., Socket Weld Port, SST
HPVSS Parallel, Vertical Line, 1/2—14 NPT, SST
HV2S0 Axial, Vertical Line, 1/2—14 NPT, SST
HV2SS Axial, Vertical Line, 1/2 in., Socket Weld Port, SST
Flow-281
ProBar® Flowmeter
MODEL PBF+15S/16S
Code Flanged Mount
FA4C 1 in. ANSI Class 150, Weld-Neck RF, CS
FA4S 1 in. ANSI Class 150, Weld-Neck RF, SST
FB4C 1 in. ANSI Class 300, Weld-Neck RF, CS
FB4S 1 in. ANSI Class 300, Weld-Neck RF, SST
FC4C 1 in. ANSI Class 600, Weld-Neck RF, CS
FC4S 1 in. ANSI Class 600, Weld-Neck RF, SST
FJMC DIN 25 PN 16, CS
FJMS DIN 25 PN 16, 316 SST
FLMC DIN 25 PN 40, CS
FLMS DIN 25 PN 40, 316 SST
FNMC DIN 25 PN 100, CS
FNMS DIN 25 PN 100, 316 SST
Code DP Ranges
0 0-0.1 to 0-3 inH20 (.0-.15 to 0 - 0.75 kPa)
1 0-.5 to 0-25 inH20 (0-.12 to 0-6.22 kPa)
2 0-2.5 to 0-250 inH20 (0-.62 to 0 - 62.2kPa)
3 0-10 to 0-830 inH20 (0-2.48 to 0-206kPa)
Code Output
Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, Explosion–Proof
Flow-282
Rosemount Inc.
MODEL PBF+15S/16S
Code Optional Quality Assurance
QA1 Dieterich Program
Q21 ANSI B31.1
Q23 ANSI B31.3
Q29 NACE MR-0175-91
QJ2 Special Product Drawing
QM2 ASTM Material-Traceable (Sensor Only)
QM8 EN 10204 3.1B Material Certs
QT1 Hydrostatic Test EP-4017
QT8 Extended Hydro EP-4046
Typical Model Number PBF+15S 020 HAMS0 C0000 FA4S0 FA4C 1 A 1 A
ProBar®
Flow-283
ProBar® Flowmeter
MODEL PBF+25S/26S
Model Product Description
PBF+25S ProBar® + Flowmeter - Flanged
PBF+26S ProBar® + Flowmeter - Flanged with Opposite Side Support
Eliminate Instrument Connection Options (For use with Direct and Integral Mount Head Styles)
C0000 Eliminate Instrument Connection Assembly
S0000 Eliminate Instrument Connection Assembly (Steam)
Needle Valve - CS
CP2C0 Needle Valve, Nipple,1/2—14 NPT, CS
SP2C0 Needle Valve, Nipple and Tee,1/2—14 NPT, CS
CA2C0 Needle Valve, Elbow, 1/2— 14 NPT, CS
SA2C0 Needle Valve, Elbow and Tee, 1/2—14 NPT, CS
Needle Valve - SST
CA2SS Needle Valve, Elbow, 1/2 in., Socket Weld Port, SST
CP2S0 Needle Valve, Nipple, 1/2—14 NPT, SST
CP2SS Needle Valve, Nipple, 1/2 in., Socket Weld Port, SST
SP2S0 Needle Valve, Nipple and Tee, 1/2—14 NPT, SST
SP2SS Needle Valve, Nipple and Tee, 1/2 in., Socket Weld Port, SST
CA2S0 Needle Valve, Elbow, 1/2—14 NPT, SST
SA2S0 Needle Valve, Elbow and Tee, 1/2—14 NPT, SST
Gate Valve - CS
CC2C0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, CS
SC2C0 Outside Stem and Yoke Gate Vertical Line, Nipple and Tee, 1/2—14 NPT, CS
SV2C0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, CS
CB2C0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, CS
SB2C0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, CS
Flow-284
Rosemount Inc.
MODEL PBF+25S/26S
Code Instrument Connections (Continued)
Gate Valve - SST
CB2SS Outside Stem and Yoke Gate Valve, Elbow, 1/2 in., Socket Weld Port, SST
CC2S0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, SST
CC2SS Outside Stem and Yoke Gate Valve, Nipple, 1/2 in., Socket Weld Port, SST
SC2S0 Outside Stem and Yoke Gate Vertical Line, Nipple and Tee, Steam, 1/2—14 NPT, SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, SST
SV2SS Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2 in., Socket Weld Port, SST
CB2S0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, SST
SB2S0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, SST
ProBar®
FB6C 11/2 in. ANSI Class 300, Weld-Neck RF, CS
FB6S 11/2 in. ANSI Class 300, Weld-Neck RF, SST
FC6C 11/2 in. ANSI Class 600, Weld-Neck RF, CS
FC6S 11/2 in. ANSI Class 600, Weld-Neck RF, SST
FJPC DIN 40 PN 16, CS
FJPS DIN 40 PN 16, 316 SST
FLPC DIN 40 PN 40, CS
FLPS DIN 40 PN 40, 316 SST
FNPC DIN 40 PN 100, CS
FNPS DIN 40 PN 100, 316 SST
Code DP Ranges
0 0-0.1 to 0-3 inH20 (.0-.15 to 0 - 0.75 kPa)
1 0-.5 to 0-25 inH20 (0-.12 to 0-6.22 kPa)
2 0-2.5 to 0-250 inH20 (0-.62 to 0 - 62.2kPa)
3 0-10 to 0-830 inH20 (0-2.48 to 0-206kPa)
Code Output
A 4—20 mA with Digital Signal based on HART
Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, Explosion–Proof
TRA Integral RTD, Axial Head
TRP Integral RTD, Parallel Head
TXA Integral RTD, Explosion–Proof, Axial
TXP Integral RTD, Explosion–Proof, Parallel
Flow-285
ProBar® Flowmeter
MODEL PBF+25S/26S
Code Optional Mounting Brackets
K Coplanar Bracket, 2 in., Pipe/Panel, SST Bolts
Flow-286
Rosemount Inc.
MODEL PBF+25H/26H
Code Product Description
PBF+25H ProBar® + Flowmeter - Flanged
PBF+26H ProBar® + Flowmeter - Flanged with Opposite Side Support
ProBar®
HADH0 Direct Mount, with 5-Valve Manifold, Horizontal Line, Hastelloy-C
HADHB Direct Mount, with 5-Valve Manifold, B31.1, Horizontal Line, Hastelloy-C
HADHN Direct Mount, with 5-Valve Manifold, NACE, Horizontal Line, Hastelloy-C
HAMH0 Integral, with 3-Valve Manifold, Horizontal Line, Hastelloy-C
HAPH0 Direct Mount, No Manifold, Horizontal Line, Hastelloy-C
Direct and Integral Mount Heads - Horizontal Line with RTD
HATH0 Integral, with 3-Valve Manifold, RTD, Horizontal Line, Hastelloy-C
HATHB Direct Mount, with 5-Valve Manifold, RTD, B31.1, Horizontal Line, Hastelloy-C
HATHD Direct Mount, with 5-Valve Manifold, RTD, Horizontal Line, Hastelloy-C
HATHN Direct Mount, with 5-Valve Manifold, RTD, NACE, Horizontal Line, Hastelloy-C
Direct and Integral Mount Heads - Vertical Line
HVDH0 Direct Mount, with 5-Valve Manifold, Vertical Line, Hastelloy-C
HVDHB Direct Mount, with 5-Valve Manifold, B31.1, Vertical Line, Hastelloy-C
HVDHN Direct Mount, with 5-Valve Manifold, NACE, Vertical Line, Hastelloy-C
HVMH0 Integral, with 3-Valve Manifold, Vertical Line, Hastelloy-C
HVPH0 Direct Mount, No Manifold, Vertical Line, Hastelloy-C
Direct and Integral Mount Heads - Vertical Line with RTD
HVTH0 Integral, with 3-Valve Manifold, RTD, Vertical Line, Hastelloy-C
HVTHB Direct Mount, with 5-Valve Manifold, RTD, B31.1, Vertical Line, Hastelloy-C
HVTHD Direct Mount, with 5-Valve Manifold, RTD, Vertical Line, Hastelloy-C
HVTHN Direct Mount, with 5-Valve Manifold, RTD, NACE, Vertical Line, Hastelloy-C
Remote Mount - Horizontal Line
HA2H0 Axial, Horizontal Line, 1/2—14 NPT, Hastelloy-C
HA2HS Axial, Horizontal Line, 1/2 in., Socket Weld Port, Hastelloy-C
HP2H0 Parallel, Horizontal Line,1/2—14 NPT, Hastelloy-C
Remote Mount - Vertical Line
HPVH0 Parallel, Vertical Line, 1/2—14 NPT, Hastelloy-C.
HV2H0 Axial, Vertical Line, 1/2—14 NPT, Hastelloy-C.
Flow-287
ProBar® Flowmeter
MODEL PBF+25H/26H
Code Instrument Connections (Continued)
Gate Valve - SST
CC2S0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, SST
SC2S0 Outside Stem and Yoke Gate Vertical Line, Nipple and Tee, Steam, 1/2—14 NPT, SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee,1/2—14 NPT, SST
CB2S0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, SST
SB2S0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, SST
Code DP Ranges
ProBar®
Code Output
A 4— 20 mA with Digital Signal based on HART
MS4CW Contoured Weld Fitting and Plug, 1 in., Socket Weld Port, CS
MS4S0 Contoured Weld Fitting and Plug, 1—11.5 NPT, SST
MS4SW Contoured Weld Fitting and Plug, 1 in., Socket Weld Port, SST
Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, Explosion–Proof
TRA Integral RTD, Axial Head
TRP Integral RTD, Parallel Head
TXA Integral RTD, Explosion–Proof, Axial
TXP Integral RTD, Explosion–Proof, Parallel
Flow-288
Rosemount Inc.
MODEL PBF+25H/26H
Code Optional Hazardous Location Certificates
I5 FM Intrinsic Safety Approval
C6 CSA Explosion–Proof and Intrinsic Safety Approval
E5 FM Explosion–Proof Approval
K5 FM Explosion–Proof and Intrinsic Safety Approval
ID KEMA/CENELEC Intrinsic Safety Approval
ED KEMA/CENELEC Explosion–Proof Approval
ProBar®
Y Lab Flow Calibration (Average K) (36 in.)
Flow-289
ProBar® Flowmeter
MODEL PBF+25M/26M
Model Product Description
PBF+25M ProBar® + Flowmeter - Flanged
PBF+26M ProBar® + Flowmeter - Flanged with Opposite Side Support
Eliminate Instrument Connection Options (For use with Direct and Integral Mount Head Styles)
C0000 Eliminate Instrument Connection Assembly
S0000 Eliminate Instrument Connection Assembly (Steam)
Needle Valve - CS
CP2C0 Needle Valve, Nipple, 1/2—14 NPT, CS
SP2C0 Needle Valve, Nipple and Tee, 1/2—14 NPT, CS
CA2C0 Needle Valve, Elbow, 1/2—14 NPT, CS
SA2C0 Needle Valve, Elbow and Tee, 1/2—14 NPT, CS
Needle Valve - SST
CP2S0 Needle Valve, Nipple, 1/2—14 NPT, SST
SP2S0 Needle Valve, Nipple and Tee, 1/2—14 NPT, SST
CA2S0 Needle Valve, Elbow, 1/2—14 NPT, SST
SA2S0 Needle Valve, Elbow and Tee, 1/2—14 NPT, SST
Needle Valve - Monel
CP2M0 Needle Valve, Nipple, 1/2—14 NPT, Monel
CA2M0 Needle Valve, Elbow, 1/2—14 NPT, Monel
Gate Valve - CS
CC2C0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, CS
SC2C0 Outside Stem and Yoke Gate Vertical Line, Nipple and Tee, 1/2—14 NPT, CS
SV2C0 Outside Stem and Yoke Gate Yoke, Vertical Line, Nipple and Tee, 1/2—14 NPT, CS
CB2C0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, CS
SB2C0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, CS
Flow-290
Rosemount Inc.
MODEL PBF+25M/26M
Code Instrument Connections (Continued)
Gate Valve - SST
CC2S0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, SST
SC2S0 Outside Stem and Yoke Gate Vertical Line, Nipple and Tee, Steam,1 1/2—14 NPT, SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, /2—14 NPT, SST
CB2S0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, SST
SB2S0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, SST
Code DP Ranges
ProBar®
1 0 -.5 to 0 - 25 inH20 (0 -.12 to 0 - 6.22 kPa)
2 0 - 2.5 to 0 - 250 inH20 (0 -.62 to 0 - 62.2kPa)
3 0 - 10 to 0 - 830 inH20 (0 - 2.48 to 0 - 206kPa)
Code Output
MS4CW Contoured Weld Fitting and Plug, 1 in., Socket Weld Port, CS
MS4S0 Contoured Weld Fitting and Plug, 1—11.5 NPT, SST
MS4SW Contoured Weld Fitting and Plug, 1 in., Socket Weld Port, SST
Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, Explosion–Proof
TRA Integral RTD, Axial Head
TRP Integral RTD, Parallel Head
TXA Integral RTD, Explosion–Proof, Axial
TXP Integral RTD, Explosion–Proof, Parallel
Flow-291
ProBar® Flowmeter
MODEL PBF+25M/26M
Code Optional Hazardous Location Certificates
I5 FM Intrinsic Safety Approval
C6 CSA Explosion–Proof and Intrinsic Safety Approval
E5 FM Explosion–Proof Approval
K5 FM Explosion–Proof and Intrinsic Safety Approval
ID KEMA/CENELEC Intrinsic Safety Approval
ED KEMA/CENELEC Explosion–Proof Approval
Flow-292
Rosemount Inc.
MODEL PBF+35S/36S
Model Product Description
PBF+35S ProBar® + Flowmeter - Flanged
PBF+36S ProBar® + Flowmeter - Flanged with Opposite Side Support
ProBar®
HADS0 Direct Mount, with 5-Valve Manifold, Horizontal Line, SST
HADSB Direct Mount, with 5-Valve Manifold, B31.1, Horizontal Line, SST
HADSN Direct Mount, with 5-Valve Manifold, NACE, Horizontal Line, SST
HAMS0 Integral, 3-Valve Manifold, Horizontal Line, SST
HAPS0 Direct Mount, No Manifold, Horizontal Line, SST
HAXS0 Direct Mount, Quantity Two, 3-Valve Manifold, Horizontal Line, SST
Direct and Integral Mount Heads - Horizontal Line With RTD
HATS0 Integral, 3-Valve Manifold, RTD, Horizontal Line, SST
HATSB Direct Mount, 5-Valve Manifold, RTD, B31.1, Horizontal Line, SST
HATSD Direct Mount, with 5-Valve Manifold, RTD, Horizontal Line, SST
HATSN Direct Mount, 5-Valve Manifold, RTD, NACE, Horizontal Line, SST
Direct and Integral Mount Heads - Vertical Line
HVDS0 Direct Mount, with 5-Valve Manifold, Vertical Line, SST
HVDSB Direct Mount, 5-Valve Manifold, B31.1, Vertical Line, SST
HVDSN Direct Mount, 5-Valve Manifold, NACE, Vertical Line, SST
HVMS0 Integral, 3-Valve Manifold, Vertical Line, SST
HVPS0 Direct Mount, No Manifold, Vertical Line, SST
Direct and Integral Mount Heads - Vertical Line With RTD
HVTS0 Integral, 3-Valve Manifold, RTD, Vertical Line, SST
HVTSB Direct Mount, 5-Valve Manifold, RTD, B31.1, Vertical Line, SST
HVTSD Direct Mount, with 5-Valve Manifold, RTD, Vertical Line, SST
HVTSN Direct Mount, 5-Valve Manifold, RTD, NACE, Vertical Line, SST
Remote Mount - Horizontal Line
HP2SS Parallel, Horizontal Line, ½ in., Socket Weld Port, SST
HA2S0 Axial, Horizontal Line, 1/2—14 NPT, SST
HA2SS Axial, Horizontal Line, ½ in., Socket Weld Port, SST
HP2S0 Parallel, Horizontal Line, 1/2—14 NPT, SST
Remote Mount - Vertical Line
HPVS0 Parallel, Vertical Line, ½ in., Socket Weld Port, SST
HPVSS Parallel, Vertical Line, 1/2—14 NPT, SST
HV2S0 Axial, Vertical Line, 1/2—14 NPT, SST
HV2SS Axial, Vertical Line, ½ in., Socket Weld Port, SST
Flow-293
ProBar® Flowmeter
MODEL PBF+35S/36S
Code Instrument Connections (Continued)
Gate Valve - SST
SC2S0 Outside Stem and Yoke Gate Vertical Line, Nipple and Tee, Steam, 1/2—14 NPT, SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, SST
CB2S0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, SST
SB2S0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, SST
CB2SS Outside Stem and Yoke Gate Valve, Elbow, ½ in., Socket Weld Port, SST
CC2SS Outside Stem and Yoke Gate Valve, Nipple, ½ in., Socket Weld Port, SST
SV2SS Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, ½ in., Socket Weld Port, SST
Code DP Ranges
0 0-0.1 to 0-3 inH20 (.0-.15 to 0 - 0.75 kPa)
1 0-.5 to 0-25 inH20 (0-.12 to 0-6.22 kPa)
2 0-2.5 to 0-250 inH20 (0-.62 to 0 - 62.2kPa)
3 0-10 to 0-830 inH20 (0-2.48 to 0-206kPa)
Code Output
Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, Explosion–Proof
TRA Integral RTD, Axial Head
TRP Integral RTD, Parallel Head
TXA Integral RTD, Explosion–Proof, Axial
TXP Integral RTD, Explosion–Proof, Parallel
Flow-294
Rosemount Inc.
MODEL PBF+35S/36S
Code Optional Meters
1 LCD Meter (Rate)- Aluminum Housing
2 LCD Meter (Rate) - SST Housing
4 External LCD Rate and Total Display
ProBar®
S Lab Flow Calibration (Average K) (18 in. to 20 in.)
T Multipoint Flow Calibration (24 in.)
U Lab Flow Calibration (Average K) (24 in.)
V Multipoint Flow Calibration (30 in.)
W Lab Flow Calibration (Average K) (30 in.)
X Multipoint Flow Calibration (36 in.)
Y Lab Flow Calibration (Average K) (36 in.)
Flow-295
ProBar® Flowmeter
MODEL PBF+45S/46S
Model Product Description
PBF+45S ProBar® + Flowmeter - Flanged
PBF+46S ProBar® + Flowmeter - Flanged with Opposite Side Support
Eliminate Instrument Connection Options (For use with Direct and Integral Mount Head Styles)
C0000 Eliminate Instrument Connection Assembly
S0000 Eliminate Instrument Connection Assembly (Steam)
Needle Valve - CS
CP2C0 Needle Valve, Nipple, ½—14 NPT, CS
SP2C0 Needle Valve, Nipple and Tee, ½—14 NPT, CS
CA2SS Needle Valve - SST
CP2S0 Needle Valve, Elbow, ½ in., Socket Weld Port, SST
SP2S0 Needle Valve, Nipple, ½—14 NPT, SST
CP2SS Needle Valve, Nipple and Tee, ½—14 NPT, SST
SP2SS Needle Valve, Nipple, ½ in., Socket Weld Port, SST
Needle Valve, Nipple and Tee, ½ in., Socket Weld Port, SST
Gate Valve - CS
CC2C0 Outside Stem and Yoke Gate Valve, Nipple, ½—14 NPT, CS
SC2C0 Outside Stem and Yoke Gate Vertical Line, Nipple and Tee, ½—14 NPT, CS
SV2C0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, ½—14 NPT, CS
Flow-296
Rosemount Inc.
MODEL PBF+45S/46S
Code Instrument Connections (Continued)
Gate Valve - SST
CC2S0 Outside Stem and Yoke Gate Valve, Nipple, ½—14 NPT, SST
SC2S0 Outside Stem and Yoke Gate Vertical Line, Nipple and Tee, Steam, ½—14 NPT, SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, ½—14 NPT, SST
CB2SS Outside Stem and Yoke Gate Valve, Elbow, ½ in., Socket Weld Port, SST
CC2SS Outside Stem and Yoke Gate Valve, Nipple, ½ in., Socket Weld Port, SST
SV2SS Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, ½ in., Socket Weld Port, SST
ProBar®
FBDS 3 in. ANSI Class 300, Weld-Neck RF, SST
FCDC 3 in. ANSI Class 600, Weld-Neck RF, CS
FCDS 3 in. ANSI Class 600, Weld-Neck RF, SST
FJTC DIN 80 PN 16, CS
FJTS DIN 80 PN 16, 316 SST
FLTC DIN 80 PN 40, CS
FLTS DIN 80 PN 40, 316 SST
FNTC DIN 80 PN 100, CS
FNTS DIN 80 PN 100, 316 SST
Code DP Ranges
Code Output
A 4—20 mA with Digital Signal based on HART
1 Silicone
2 Inert Fill
Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
Flow-297
ProBar® Flowmeter
MODEL PBF+45S/46S
Code Optional Meters
1 LCD Meter (Rate)- Aluminum Housing
2 LCD Meter (Rate) - SST Housing
4 External LCD Rate and Total Display
Flow-298
Rosemount Inc.
MODEL PBF+45H/46H
Model Product Description
PBF+45H ProBar® + Flowmeter - Flanged
PBF+46H ProBar® + Flowmeter - Flanged with Opposite Side Support
ProBar®
HADHB Direct Mount, with 5-Valve Manifold, B31.1, Horizontal Line, Hastelloy-C
HADHN Direct Mount, with 5-Valve Manifold, NACE, Horizontal Line, Hastelloy-C
HAMH0 Integral, with 3-Valve Manifold, Horizontal Line, Hastelloy-C
HAPH0 Direct Mount, No Manifold, Horizontal Line, Hastelloy-C
Direct and Integral Mount Heads - Horizontal Line With RTD
HATH0 Integral, with 3-Valve Manifold, RTD, Horizontal Line, Hastelloy-C
HATHB Direct Mount, with 5-Valve Manifold,RTD,B31.1, Horizontal Line, Hastelloy-C
HATHD Direct Mount, with 5-Valve Manifold, RTD, Horizontal Line, Hastelloy-C
HATHN Direct Mount, with 5-Valve Manifold, RTD, NACE, Horizontal Line, Hastelloy-C
Direct and Integral Mount Heads - Vertical Line
HVDH0 Direct Mount, with 5-Valve Manifold, Vertical Line, Hastelloy-C
HVDHB Direct Mount, with 5-Valve Manifold, B31.1, Vertical Line, Hastelloy-C
HVDHN Direct Mount, with 5-Valve Manifold, NACE, Vertical Line, Hastelloy-C
HVMH0 Integral, with 3-Valve Manifold, Vertical Line, Hastelloy-C
HVPH0 Direct Mount, No Manifold, Vertical Line, Hastelloy-C
Direct and Integral Mount Heads - Vertical Line With RTD
HVTH0 Integral, with 3-Valve Manifold, RTD, Vertical Line, Hastelloy-C
HVTHB Direct Mount, with 5-Valve Manifold, RTD, B31.1,Vertical Line, Hastelloy-C
HVTHD Direct Mount, with 5-Valve Manifold, RTD, Vertical Line, Hastelloy-C
HVTHN Direct Mount, with 5-Valve Manifold, RTD, NACE, Vertical Line, Hastelloy-C
Remote Mount - Horizontal Line
HA2H0 Axial, Horizontal Line, ½—14 NPT, Hastelloy-C
HA2HS Axial, Horizontal Line, ½ in., Socket Weld Port, Hastelloy-C
HP2H0 Parallel, Horizontal Line, ½—14 NPT, Hastelloy-C
Remote Mount - Vertical Line
HPVH0 Parallel, Vertical Line, ½—14 NPT, Hastelloy-C.
HV2H0 Axial, Vertical Line, ½—14 NPT, Hastelloy-C.
HSVH0 Stack head with purge, Vertical Line, ½—14 NPT, Hastelloy-C
Flow-299
ProBar® Flowmeter
MODEL PBF+45H/46H
Code Flanged Mount
FADC 3 in. ANSI Class 150, Weld-Neck RF, CS
FADS 3 in. ANSI Class 150, Weld-Neck RF, SST
FBDC 3 in. ANSI Class 300, Weld-Neck RF, CS
FBDS 3 in. ANSI Class 300, Weld-Neck RF, SST
FCDC 3 in. ANSI Class 600, Weld-Neck RF, CS
FCDS 3 in. ANSI Class 600, Weld-Neck RF, SST
Code DP Ranges
Code Output
A 4—20 mA with Digital Signal based on HART
1 Silicone
2 Inert Fill
ProBar®
Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, Explosion–Proof
TRA Integral RTD, Axial Head
TRP Integral RTD, Parallel Head
TXA Integral RTD, Explosion–Proof, Axial
TXP Integral RTD, Explosion–Proof, Parallel
Flow-300
Rosemount Inc.
MODEL PBF+45H/46H
Code Optional Calibration
L Multipoint Flow Calibration (ID ≤ 10 in.)
M Lab Flow Calibration (Average K) (<10 in.)
Z Special Calibration
N Multipoint Flow Calibration (12 in.)
P Multipoint Flow Calibration (14 in. to 16 in.)
O Lab Flow Calibration (Average K) (12 in.)
Q Lab Flow Calibration (Average K) (14 in. to 16 in.)
R Multipoint Flow Calibration (18 in. to 20 in.)
S Lab Flow Calibration (Average K) (18 in. to 20 in.)
T Multipoint Flow Calibration (24 in.)
U Lab Flow Calibration (Average K) (24 in.)
V Multipoint Flow Calibration (30 in.)
W Lab Flow Calibration (Average K) (30 in.)
X Multipoint Flow Calibration (36 in.)
Y Lab Flow Calibration (Average K) (36 in.)
ProBar®
QM2 ASTM Material-Traceable (Sensor Only)
QT1 Hydrostatic Test EP-4017
QT2 Dye Penetrant ES-1012
QT8 Extended Hydro EP-4046
Typical Model Number PBF+45H 240 HAMH0 C0000 FADH0 FADC 1 A 1 A
Flow-301
ProBar® Flowmeter
MODEL PBF+45M/46M
Model Product Description
PBF+45M ProBar® + Flowmeter - Flanged
PBF+46M ProBar® + Flowmeter - Flanged with Opposite Side Support
HADMB Direct Mount, with 5-Valve Manifold, B31.1, Horizontal Line, Monel
HADMN Direct Mount, with 5-Valve Manifold, NACE, Horizontal Line, Monel
HAMM0 Integral, 3-Valve Manifold, Horizontal Line, Monel
HAPM0 Direct Mount, No Manifold, Horizontal Line, Monel
Direct and Integral Mount Heads - Horizontal Line
HATM0 Integral, 3-Valve Manifold, RTD, Horizontal Line, Monel
HATMB Direct Mount, 5-Valve Manifold, RTD, B31.1, Horizontal Line, Monel
HATMD Direct Mount, with 5-Valve Manifold, RTD, Horizontal Line, Monel
HATMN Direct Mount, 5-Valve Manifold, RTD, NACE, Horizontal Line, Monel
Direct and Integral Mount Heads - Vertical Line
HVDM0 Direct Mount, with 5-Valve Manifold, Vertical Line, Monel
HVDMB Direct Mount, 5-Valve Manifold, B31.1, Vertical Line, Monel
HVDMN Direct Mount, 5-Valve Manifold, NACE, Vertical Line, Monel
HVMM0 Integral, 3-Valve Manifold, Vertical Line, Monel
HVPM0 Direct Mount, No Manifold, Vertical Line, Monel
Direct and Integral Mount Heads - Vertical Line with RTD
HVTM0 Integral, 3-Valve Manifold, RTD, Vertical Line, Monel
HVTMB Direct Mount, 5-Valve Manifold, RTD, B31.1, Vertical Line, Monel
HVTMD Direct Mount, with 5-Valve Manifold, RTD, Vertical Line, Monel
HVTMN Direct Mount, 5-Valve Manifold, RTD, NACE, Vertical Line, Monel
Remote Mount - Horizontal Line
HA2M0 Axial, Horizontal Line, ½—14 NPT, Monel
HA2MS Axial, Horizontal Line, ½ in., Socket Weld Port, Monel
HP2M0 Parallel, Horizontal Line, ½—14 NPT, Monel
Remote Mount - Vertical Line
HPVM0 Parallel, Vertical Line, ½—14 NPT, Monel
HV2M0 Axial, Vertical Line, ½—14 NPT, Monel
HV2MS Axial, Vertical Line, ½ in., Socket Weld Port, Monel
HSVM0 Stack Head with Purge, Vertical Line, ½—14 NPT, Monel
Flow-302
Rosemount Inc.
MODEL PBF+45M/46M
Code Flanged Mount
FADC 3 in. ANSI Class 150, Weld-Neck RF, CS
FADS 3 in. ANSI Class 150, Weld-Neck RF, SST
FBDC 3 in. ANSI Class 300, Weld-Neck RF, CS
FBDS 3 in. ANSI Class 300, Weld-Neck RF, SST
FCDC 3 in. ANSI Class 600, Weld-Neck RF, CS
FCDS 3 in. ANSI Class 600, Weld-Neck RF, SST
Code DP Ranges
Code Output
A 4—20 mA with Digital Signal based on HART
1 Silicone
2 Inert Fill
ProBar®
Code Housing Material
A Epoxy-Poly-Aluminum ½—14 NPT
B Epoxy-Poly-Aluminum CM 20
C Epoxy-Poly-Aluminum PG13.5
D Epoxy-Poly-Aluminum G½
J 316 SST ½—14 NPT
K 316 SST CM 20
L 316 SST PG 13.5
M Epoxy-Poly-Aluminum G½
Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, Explosion–Proof
TRA Integral RTD, Axial Head
TRP Integral RTD, Parallel Head
TXA Integral RTD, Explosion–Proof, Axial
TXP Integral RTD, Explosion–Proof, Parallel
Flow-303
ProBar® Flowmeter
MODEL PBF+45M/46M
Code Optional Calibration
L Multipoint Flow Calibration (ID ≤ 10 in.)
M Lab Flow Calibration (Average K) (<10 in.)
Z Special Calibration
N Multipoint Flow Calibration (12 in.)
P Multipoint Flow Calibration (14 in. to 16 in.)
O Lab Flow Calibration (Average K) (12 in.)
Q Lab Flow Calibration (Average K) (14 in. to 16 in.)
R Multipoint Flow Calibration (18 in. to 20 in.)
S Lab Flow Calibration (Average K) (18 in. to 20 in.)
T Multipoint Flow Calibration (24 in.)
U Lab Flow Calibration (Average K) (24 in.)
V Multipoint Flow Calibration (30 in.)
W Lab Flow Calibration (Average K) (30 in.)
X Multipoint Flow Calibration (36 in.)
Y Lab Flow Calibration (Average K) (36 in.)
Flow-304
Rosemount Inc.
ProBar®
Flow-305
ProBar® Flowmeter
ProBar®
306
Flow-306
Rosemount Inc.
ProBar®
Flow-307
ProBar® Flowmeter
ProBar®
308
Flow-308
Rosemount Inc.
ProBar®
Flow-309
ProBar® Flowmeter
Code Fittings
Direct and Integral Mount Heads - Horizontal Line
HAMS0 Integral, 3-Valve Manifold, Horizontal Line, SST
HADS0 Direct Mount, with 5-Valve Manifold, Horizontal Line, SST
Ordering
HADSB Direct Mount, with 5-Valve Manifold, B31.1, Horizontal Line, SST
HADSN Direct Mount, with 5-Valve Manifold, NACE, Horizontal Line, SST
HAPS0 Direct Mount, No Manifold, Horizontal Line, SST
Direct and Integral Mount Heads - Vertical Line
HVMS0 Integral, 3-Valve Manifold, Vertical Line, SST
HVDS0 Direct Mount, with 5-Valve Manifold, Vertical Line, SST
HVDSB Direct Mount, 5-Valve Manifold, B31.1, Vertical Line, SST
HVDSN Direct Mount, 5-Valve Manifold, NACE, Vertical Line, SST
HVPS0 Direct Mount, No Manifold, Vertical Line, SST
Remote Mount
HF1SS Fittings, ¼ in. Socket Weld Ports, SST
HM1S0 Fittings, ¼—18 NPT, SST
Code DP Ranges
0 0-0.1 to 0-3 inH20 (.0-.15 to 0 - 0.75 kPa)
1 0-.5 to 0-25 inH20 (0-.12 to 0-6.22 kPa)
2 0-2.5 to 0-250 inH20 (0-.62 to 0 - 62.2kPa)
3 0-10 to 0-830 inH20 (0-2.48 to 0-206kPa)
Code Output
A 4—20 mA with Digital Signal Based on HART
Flow-310
Rosemount Inc.
MODEL PNT+10S
Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, Explosion-Proof
ProBar®
Code Optional Hazardous Location Certificates
I5 FM Intrinsic Safety Approval
C6 CSA Explosion-Proof and Intrinsic Safety Approval
E5 FM Explosion-Proof Approval
K5 FM Explosion-Proof and Intrinsic Safety Approval
ID KEMA/CENELEC Intrinsic Safety Certificate
ED KEMA/CENELEC Explosion-Proof Approval
Flow-311
ProBar® Flowmeter
Code Fittings
Direct and Integral Mount Heads - Horizontal Line
HAMS0 Integral, 3-Valve Manifold, Horizontal Line, SST
HADS0 Direct Mount, with 5-Valve Manifold, Horizontal Line, SST
HADSB Direct Mount, with 5-Valve Manifold, B31.1, Horizontal Line, SST
HADSN Direct Mount, with 5-Valve Manifold, NACE, Horizontal Line, SST
HAPS0 Direct Mount, No Manifold, Horizontal Line, SST
ProBar®
Code DP Ranges
0 0-0.1 to 0-3 inH20 (.0-.15 to 0 - 0.75 kPa)
1 0-.5 to 0-25 inH20 (0-.12 to 0-6.22 kPa)
2 0-2.5 to 0-250 inH20 (0-.62 to 0 - 62.2kPa)
3 0-10 to 0-830 inH20 (0-2.48 to 0-206kPa)
Code Output
Flow-312
Rosemount Inc.
MODEL PNF+10S
Code Housing Material
A Epoxy-Poly-Aluminum ½—14 NPT
B Epoxy-Poly-Aluminum CM 20
C Epoxy-Poly-Aluminum PG 13.5
D Epoxy-Poly-Aluminum G½
J 316 SST ½—14 NPT
K 316 SST CM 20
L 316 SST PG 13.5
M Epoxy-Poly-Aluminum G½
Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
ProBar®
Code Optional Mounting Brackets
Flow-313
ProBar® Flowmeter
MODEL PNF+10H
Model Product Description
PNF+10H ProBar® + Flowmeter - In-line Flanged
Code Fittings
Direct and Integral Mount Heads - Horizontal Line
HADH0 Direct Mount, with 5-Valve Manifold, Horizontal Line, Hastelloy-C
HADHN Direct Mount, with 5-Valve Manifold, NACE, Horizontal Line, Hastelloy-C
HAMH0 Integral, 3-Valve Manifold, Horizontal Line, Hastelloy-C
HAPH0 Direct Mount, No Manifold, Horizontal Line, Hastelloy-C
HADHB Direct Mount, with 5-Valve Manifold, B31.1, Horizontal Line, Hastelloy-C
Direct and Integral Mount Heads - Vertical Line
HVDH0 Direct Mount, with 5-Valve Manifold, Vertical Line, Hastelloy-C
ProBar®
Code DP Ranges
1 0-.5 to 0-25 in H2O (0-.12 to 0-6.22 kPa)
2 0-2.5 to 0-250 in H2O (0-.62 to 0-62.2 kPa)
3 0-10 to 0-830 in H2O (0-2.48 to 0-206 kPa)
Code Output
A 4–20 mA with Digital Signal Based on HART
Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
Flow-314
Rosemount Inc.
MODEL PNF+10H
Code Optional Manifolds
3 Model 305 Manifold Bolted to Transmitter
5 5-Valve Manifold, CS
6 5-Valve Manifold, SST
7 3-Valve Manifold, CS
8 3-Valve Manifold, SST
ProBar®
ID KEMA/CENELEC Intrinsic Safety Certificate
ED KEMA/CENELEC Explosion-Proof Approval
Flow-315
ProBar® Flowmeter
MODEL PNF+10M
Model Product Description
PNF+10M ProBar® + Flowmeter - In-line Flanged
Code Fittings
Direct and Integral Mount Heads - Horizontal Line
HADMN Direct Mount, with 5-Valve Manifold, NACE, Horizontal Line, Monel
HADM0 Direct Mount, with 5-Valve Manifold, Horizontal Line, Monel
HADMB Direct Mount, with 5-Valve Manifold, B31.1, Horizontal Line, Monel
HAMM0 Integral, 3-Valve Manifold, Horizontal Line, Monel
HAPM0 Direct Mount, No Manifold, Horizontal Line, Monel
ProBar®
Eliminate Instrument Connection Options (For use with Direct and Integral Mount Head Styles)
C0000 Eliminate Instrument Connection Assembly
S0000 Eliminate Instrument Connection Assembly (Steam)
Needle Valve - CS
CP1C0 Needle Valve, Nipple, ¼—18 NPT, CS
SP1C0 Needle Valve, Nipple and Tee, ¼—18 NPT, CS
Needle Valve - SST
CP1S0 Needle Valve, Nipple, ¼—18 NPT, SST
SP1S0 Needle Valve, Nipple and Tee, ¼—18 NPT, SST
Gate Valve
SB1C0 Outside Stem and Yoke Gate Valve, Elbow and Tee, ¼—18 NPT, CS
SB1S0 Outside Stem and Yoke Gate Valve, Elbow and Tee, ¼—18 NPT, SST
Code DP Ranges
1 0-.5 to 0-25 in H2O (0-.12 to 0-6.22 kPa)
2 0-2.5 to 0-250 in H2O (0-.62 to 0-62.2 kPa)
3 0-10 to 0-830 in H2O (0-2.48 to 0-206 kPa)
Code Output
A 4–20 mA with Digital Signal Based on HART
1 Silicone
2 Inert Fill
Flow-316
Rosemount Inc.
MODEL PNF+10M
Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, Explosion-Proof
ProBar®
Code Optional Hazardous Location Certificates
I5 FM Intrinsic Safety Approval
C6 CSA Explosion-Proof and Intrinsic Safety Approval
E5 FM Explosion-Proof Approval
K5 FM Explosion-Proof and Intrinsic Safety Approval
ID KEMA/CENELEC Intrinsic Safety Certificate
ED KEMA/CENELEC Explosion-Proof Approval
Flow-317
ProBar® Flowmeter
Code Fittings
Code DP Ranges
0 0-0.1 to 0-3 inH20 (.0-.15 to 0 - 0.75 kPa)
1 0-.5 to 0-25 inH20 (0-.12 to 0-6.22 kPa)
2 0-2.5 to 0-250 inH20 (0-.62 to 0 - 62.2kPa)
3 0-10 to 0-830 inH20 (0-2.48 to 0-206kPa)
Code Output
A 4–20 mA with Digital Signal Based on HART
Flow-318
Rosemount Inc.
MODEL PNW+10S
Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, Explosion-Proof
ProBar®
Code Optional Hazardous Location Certificates
I5 FM Intrinsic Safety Approval
C6 CSA Explosion Proof and Intrinsic Safety Approval
E5 FM Explosion-Proof Approval
K5 FM Explosion-Proof and Intrinsic Safety Approval
ID KEMA/CENELEC Intrinsic Safety Certificate
ED KEMA/CENELEC Explosion-Proof Approval
Flow-319
ProBar® Flowmeter
ProBar®
320
Flow-320
Rosemount Inc.
ProBar®
Flow-321
ProBar® Flowmeter
ProBar®
322
Flow-322
Rosemount Inc.
ProBar®
Flow-323
ProBar® Flowmeter
ProBar®
324
Flow-324
Rosemount Inc.
ProBar®
Direct and Integral Mount Heads - Vertical Line
HVMS0 Integral, 3-Valve Manifold, Vertical Line, SST
HVDS0 Direct Mount, 5-Valve Manifold, Vertical Line, SST
HVDSB Direct Mount, 5-Valve Manifold, ANSI B31.1, Vertical Line, SST
HVDSN Direct Mount, 5-Valve Manifold, NACE, Vertical Line, SST
HVPS0 Direct Mount, No Manifold, Vertical Line, SST
Remote Mount - Horizontal Line
HP2SS Parallel, Horizontal Line, 1/2 in. Socket Weld Port, SST
HA2S0 Axial, Horizontal Line, 1/2—14 NPT, SST
HA2SS Axial, Horizontal Line, 1/2 in. Socket Weld Port, SST
HP2S0 Parallel, Horizontal Line, 1/2—14 NPT, SST
Remote Mount - Vertical Line
HPVS0 Parallel, Vertical Line, 1/2 in. Socket Weld Port, SST
HPVSS Parallel, Vertical Line, 1/2—14 NPT, SST
HV2S0 Axial, Vertical Line, 1/2—14 NPT, SST
HV2SS Axial, Vertical Line, 1/2 in. Socket Weld Port, SST
Flow-325
ProBar® Flowmeter
MODEL PHT+15S
Code Insert/Retract
Code DP Ranges
Code Output
1 Silicone
2 Inert Fill
Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, Explosion-Proof
Flow-326
Rosemount Inc.
MODEL PHT+15S
Code Optional Quality Assurance
Typical Model Number: PHT+15S 020 HAMS0 C0000 GV3S0 IHRC VT3CG MH3C0 2 A 1 A
ProBar®
Flow-327
ProBar® Flowmeter
MODEL PHT+25S
Model Product Description
PHT+25S ProBar® + Flowmeter - Threaded Flo-Tap
Flow-328
Rosemount Inc.
MODEL PHT+25S
Code Instrument Connections (Continued)
Gate Valve - CS
CC2C0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, CS
SC2C0 Outside Stem and Yoke Gate Valve, Nipple and Tee, 1/2—14 NPT, CS
SV2C0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, CS
CB2C0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, CS
SB2C0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, CS
Gate Valve - SST
CC2S0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, SST
SC2S0 Outside Stem and Yoke Gate Valve, Nipple and Tee, Steam, 1/2—14 NPT, SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, SST
CB2SS Outside Stem and Yoke Gate Valve, Elbow, 1/2 in. Socket Weld Port, SST
CC2SS Outside Stem and Yoke Gate Valve, Nipple, 1/2 in. Socket Weld Port, SST
SV2SS Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2 in. Socket Weld Port, SST
CB2S0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, SST
SB2S0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, SST
ProBar®
GH5C0 Urethane, 11/4—11.5 NPT, CS
Code Insert/Retract
IHRS Manual, Dual, SST Rods
IHRC Manual, Dual, CS Rods
IHDS Gear, Dual, SST Rods
Code DP Ranges
Code Output
1 Silicone
2 Inert Fill
Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, Explosion-Proof
TRA Integral RTD, Axial Head
TRP Integral RTD, Parallel Head
TXA Integral RTD, Explosion-Proof, Axial
TXP Integral RTD, Explosion-Proof, Parallel
Flow-329
ProBar® Flowmeter
MODEL PHT+25S
Code Optional Manifolds
3 Model 305 Manifold Bolted to Transmitter
5 5 Valve Manifold, CS
6 5 Valve Manifold, SST
7 3 Valve Manifold, CS
8 3 Valve Manifold, SST
9 Special Manifold
E5 FM Explosion-Proof Approval
K5 FM Explosion-Proof and Intrinsic Safety Approval
ID KEMA/CENELEC Intrinsic Safety Approval
ED KEMA/CENELEC Explosion-Proof Approval
Typical Model Number: PHT+25S 040 HAMS0 C0000 GV5SO IHRC VT5CG MH5C0 2 A 1 A
Flow-330
Rosemount Inc.
MODEL PHT+35S
Model Product Description
PHT+35S ProBar® + Flowmeter - Threaded Flo-Tap
ProBar®
HAMS0 Integral, 3-Valve Manifold, Horizontal Line, SST
HADS0 Direct Mount, 5-Valve Manifold, Horizontal Line, SST
HADSB Direct Mount, 5-Valve Manifold, ANSI B31.1, Horizontal Line, SST
HADSN Direct Mount, 5-Valve Manifold, NACE, Horizontal Line, SST
HAPS0 Direct Mount, No Manifold, Horizontal Line, SST
Direct and Integral Mount Heads - Horizontal Line with RTD
HATSN Direct Mount, 5-Valve Manifold, RTD, NACE, Horizontal Line, SST
HATS0 Integral, 3-Valve Manifold, RTD, Horizontal Line, SST
HATSD Direct Mount, 5-Valve Manifold, RTD, Horizontal Line, SST
HATSB Direct Mount, 5-Valve Manifold, RTD, ANSI B31.1, Horizontal Line, SST
Direct and Integral Mount Heads - Vertical Line
HVMS0 Integral, 3-Valve Manifold, Vertical Line, SST
HVDS0 Direct Mount, 5-Valve Manifold, Vertical Line, SST
HVDSB Direct Mount, 5-Valve Manifold, ANSI B31.1, Vertical Line, SST
HVDSN Direct Mount, 5-Valve Manifold, NACE, Vertical Line, SST
HVPS0 Direct Mount, No Manifold, Vertical Line, SST
Direct and Integral Mount Heads - Vertical Line with RTD
HVTS0 Integral, 3-Valve Manifold, RTD, Vertical Line, SST
HVTSB Direct Mount, 5-Valve Manifold, RTD, ANSI B31.1, Vertical Line, SST
HVTSD Direct Mount, 5-Valve Manifold, RTD, Vertical Line, SST
HVTSN Direct Mount, 5-Valve Manifold, RTD, NACE, Vertical Line, SST
Remote Mount - Horizontal Line
HP2SS Parallel, Horizontal Line, 1/2 in. Socket Weld Port, SST
HA2S0 Axial, Horizontal Line, 1/2—14 NPT, SST
HA2SS Axial, Horizontal Line, 1/2 in. Socket Weld Port, SST
HP2S0 Parallel, Horizontal Line, 1/2—14 NPT, SST
Remote Mount - Vertical Line
HPVS0 Parallel, Vertical Line, 1/2 in. Socket Weld Port, SST
HPVSS Parallel, Vertical Line, 1/2—14 NPT, SST
HV2S0 Axial, Vertical Line, 1/2—14 NPT, SST
HV2SS Axial, Vertical Line, 1/2 in. Socket Weld Port, SST
Flow-331
ProBar® Flowmeter
MODEL PHT+35S
Code Instrument Connections (Continued)
Gate Valve - CS
CC2C0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, CS
SC2C0 Outside Stem and Yoke Gate Valve, Nipple and Tee, 1/2—14 NPT, CS
SV2C0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, CS
CB2C0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, CS
SB2C0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, CS
Gate Valve - SST
CC2S0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, SST
SC2S0 Outside Stem and Yoke Gate Valve, Nipple and Tee, Steam, 1/2—14 NPT, SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, SST
CB2SS Outside Stem and Yoke Gate Valve, Elbow, 1/2 in. Socket Weld Port, SST
CC2SS Outside Stem and Yoke Gate Valve, Nipple, 1/2 in. Socket Weld Port, SST
SV2SS Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2 in. Socket Weld Port, SST
CB2S0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, SST
SB2S0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, SST
Code Insert/Retract
IHRS Manual, Dual, SST Rods
IHRC Manual, Dual, CS Rods
I990 Special Insert/Retract Assembly
IHDS Gear, Dual, SST Rods
Gate Valve
VT8SG Gate Valve, 2—11.5 NPT, SST
VT8CG Gate Valve, 2—11.5 NPT, CS
Ball Valve
VT8SB Ball Valve, 2—11.5 NPT, SST
VT8CB Ball Valve, 2—11.5 NPT, CS
Code DP Ranges
0 0-0.1 to 0-3 inH20 (.0-.15 to 0 - 0.75 kPa)
1 0-.5 to 0-25 inH20 (0-.12 to 0-6.22 kPa)
2 0-2.5 to 0-250 inH20 (0-.62 to 0 - 62.2kPa)
3 0-10 to 0-830 inH20 (0-2.48 to 0-206kPa)
Code Output
A 4—20 mA with Digital Signal based on HART
Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, Explosion-Proof
TRA Integral RTD, Axial Head
TRP Integral RTD, Parallel Head
TXA Integral RTD, Explosion-Proof, Axial
TXP Integral RTD, Explosion-Proof, Parallel
Flow-332
Rosemount Inc.
MODEL PHT+35S
Code Optional Manifolds
3 Model 305 Manifold Bolted to Transmitter
5 5 Valve Manifold, CS
6 5 Valve Manifold, SST
7 3 Valve Manifold, CS
8 3 Valve Manifold, SST
ProBar®
ID KEMA/CENELEC Intrinsic Safety Approval
ED KEMA/CENELEC Explosion-Proof Approval
Typical Model Number: PHT+35S 120 HAMS0 C0000 GV8C0 IHDS VT8CG MH8C0 2 A 1 A
Flow-333
ProBar® Flowmeter
ProBar®
334
Flow-334
Rosemount Inc.
ProBar®
Flow-335
ProBar® Flowmeter
ProBar®
336
Flow-336
Rosemount Inc.
ProBar®
Flow-337
ProBar® Flowmeter
ProBar®
338
Flow-338
Rosemount Inc.
ProBar®
Flow-339
ProBar® Flowmeter
Flow-340
Rosemount Inc.
MODEL PHF+15S
Code Packing Gland
GV4SC Graphite, 1 in. ANSI Class 600, SST
GV4SB Graphite, 1 in. ANSI Class 300, SST
GV4SA Graphite, 1 in. ANSI Class 150, SST
GH4SC Urethane, 1 in. ANSI Class 600, SST
GH4SB Urethane, 1 in. ANSI Class 300, SST
GH4SA Urethane, 1 in. ANSI Class 150, SST
Code Insert/Retract
IHRS Manual, Dual, SST Rods
IHRC Manual, Dual, CS Rods
ProBar®
Ball Valve
VB4SB Ball Valve, 1 in. ANSI Class 300, SST
VB4CB Ball Valve, 1 in. ANSI Class 300, CS
VA4SB Ball Valve, 1 in. ANSI Class 150, SST
VA4CB Ball Valve, 1 in. ANSI Class 150, CS
Other
FA4C 1 in. ANSI Class 150, Weld-Neck RF, CS
FA4S 1 in. ANSI Class 150, Weld-Neck RF, SST
FB4C 1 in. ANSI Class 300, Weld-Neck RF, CS
FB4S 1 in. ANSI Class 300, Weld-Neck RF, SST
FC4C 1 in. ANSI Class 600, Weld-Neck RF, CS
FC4S 1 in. ANSI Class 600, Weld-Neck RF, SST
Code DP Ranges
0 0-0.1 to 0-3 inH20 (.0-.15 to 0 - 0.75 kPa)
1 0-.5 to 0-25 inH20 (0-.12 to 0-6.22 kPa)
2 0-2.5 to 0-250 inH20 (0-.62 to 0 - 62.2kPa)
3 0-10 to 0-830 inH20 (0-2.48 to 0-206kPa)
Code Output
Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, Explosion-Proof
Flow-341
ProBar® Flowmeter
MODEL PHF+15S
Code Optional Meters
1 LCD Meter (Rate)- Aluminum Housing
2 LCD Meter (Rate) - SST Housing
4 External LCD Rate and Total Display
Typical Model Number: PHF+15S 020 HAMS0 C0000 GV4SA IHRS VA4CG 1 A 1 A
Flow-342
Rosemount Inc.
MODEL PHF+25S
Model Product Description
PHF+25S ProBar® + Flowmeter - Flanged Flo-Tap
ProBar®
HADS0 Direct Mount, 5-Valve Manifold, Horizontal Line, SST
HADSB Direct Mount, 5-Valve Manifold, ANSI B31.1, Horizontal Line, SST
HADSN Direct Mount, 5-Valve Manifold, NACE, Horizontal Line, SST
HAMS0 Integral, 3-Valve Manifold, Horizontal Line, SST
HAPS0 Direct Mount, No Manifold, Horizontal Line, SST
Direct and Integral Mount Heads - Horizontal Line with RTD
HATSN Direct Mount, 5-Valve Manifold, RTD, NACE, Horizontal Line, SST
HATS0 Integral, 3-Valve Manifold, RTD, Horizontal Line, SST
HATSD Direct Mount, 5-Valve Manifold, RTD, Horizontal Line, SST
Direct and Integral Mount Heads - Vertical Line
HVDS0 Direct Mount, 5-Valve Manifold, Vertical Line, SST
HVDSB Direct Mount, 5-Valve Manifold, ANSI B31.1, Vertical Line, SST
HVDSN Direct Mount, 5-Valve Manifold, NACE, Vertical Line, SST
HVMS0 Integral, 3-Valve Manifold, Vertical Line, SST
HVPS0 Direct Mount, No Manifold, Vertical Line, SST
Direct and Integral Mount Heads - Vertical Line with RTD
HVTS0 Integral, 3-Valve Manifold, RTD, Vertical Line, SST
HVTSB Direct Mount, 5-Valve Manifold, RTD, ANSI B31.1, Vertical Line, SST
HVTSD Direct Mount, 5-Valve Manifold, RTD, Vertical Line, SST
HVTSN Direct Mount, 5-Valve Manifold, RTD, NACE, Vertical Line, SST
Remote Mount - Horizontal Line
HP2SS Parallel, Horizontal Line, 1/2 in. Socket Weld Port, SST
HA2S0 Axial, Horizontal Line, 1/2—14 NPT, SST
HA2SS Axial, Horizontal Line, 1/2 in. Socket Weld Port, SST
HP2S0 Parallel, Horizontal Line, 1/2—14 NPT, SST
Remote Mount - Vertical Line
HPVS0 Parallel, Vertical Line, 1/2 in. Socket Weld Port, SST
HPVSS Parallel, Vertical Line, 1/2—14 NPT, SST
HV2S0 Axial, Vertical Line, 1/2—14 NPT, SST
HV2SS Axial, Vertical Line, 1/2 in. Socket Weld Port, SST
Flow-343
ProBar® Flowmeter
MODEL PHF+25S
Code Instrument Connections (Continued)
Gate Valve - SST
CC2S0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, SST
SC2S0 Outside Stem and Yoke Gate Valve, Nipple and Tee, Steam, 1/2—14 NPT, SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, SST
CB2S0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, SST
SB2S0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, SST
CB2SS Outside Stem and Yoke Gate Valve, Elbow, 1/2 in. Socket Weld Port, SST
CC2SS Outside Stem and Yoke Gate Valve, Nipple, 1/2 in. Socket Weld Port, SST
SV2SS Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2 in. Socket Weld Port, SST
Code Insert/Retract
IHRS Manual, Dual, SST Rods
ProBar®
Code DP Ranges
0 0-0.1 to 0-3 inH20 (.0-.15 to 0 - 0.75 kPa)
1 0-.5 to 0-25 inH20 (0-.12 to 0-6.22 kPa)
2 0-2.5 to 0-250 inH20 (0-.62 to 0 - 62.2kPa)
3 0-10 to 0-830 inH20 (0-2.48 to 0-206kPa)
Code Output
A 4—20 mA with Digital Signal based on HART
Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
Flow-344
Rosemount Inc.
MODEL PHF+25S
Code Optional Manifolds
3 Model 305 Manifold Bolted to Transmitter
5 5 Valve Manifold, CS
6 5 Valve Manifold, SST
7 3 Valve Manifold, CS
8 3 Valve Manifold, SST
9 Special Manifold
ProBar®
K5 FM Explosion-Proof and Intrinsic Safety Approval
ID KEMA/CENELEC Intrinsic Safety Approval
ED KEMA/CENELEC Explosion-Proof Approval
Typical Model Number: PHF+25S 080 HADSO C0000 GV8SA IHRC VA8SG FA87C 2 A 1 A
Flow-345
ProBar® Flowmeter
MODEL PHF+25H
Model Product Description
PHF+25H ProBar® + Flowmeter - Flanged Flo-Tap
Flow-346
Rosemount Inc.
MODEL PHF+25H
Code Instrument Connections (Continued)
Gate Valve - SST
CC2S0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, SST
SC2S0 Outside Stem and Yoke Gate Valve, Nipple and Tee, Steam, 1/2—14 NPT, SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, SST
CB2S0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, SST
SB2S0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, SST
Code Insert/Retract
ProBar®
Gate Valve
VC6SG Gate Valve, 11/2 in. ANSI Class 600, SST
VC6CG Gate Valve, 11/2 in. ANSI Class 600, CS
VB6SG Gate Valve, 11/2 in. ANSI Class 300, SST
VB6CG Gate Valve, 11/2 in. ANSI Class 300, CS
VA6SG Gate Valve, 11/2 in. ANSI Class 150, SST
VA6CG Gate Valve, 11/2 in. ANSI Class 150, CS
Ball Valve
VB6SB Ball Valve, 11/2 in. ANSI Class 300, SST
VB6CB Ball Valve, 11/2 in. ANSI Class 300, CS
VA6SB Ball Valve, 11/2 in. ANSI Class 150, SST
VA6CB Ball Valve, 11/2 in. ANSI Class 150, CS
Code DP Ranges
Code Output
Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, Explosion-Proof
TRA Integral RTD, Axial Head
TRP Integral RTD, Parallel Head
TXA Integral RTD, Explosion-Proof, Axial
TXP Integral RTD, Explosion-Proof, Parallel
Flow-347
ProBar® Flowmeter
MODEL PHF+25H
Code Optional Manifolds
3 Model 305 Manifold Bolted to Transmitter
5 5 Valve Manifold, CS
6 5 Valve Manifold, SST
7 3 Valve Manifold, CS
8 3 Valve Manifold, SST
Typical Model Number: PHF+25H 040 HAMH0 C0000 GV6HA IHRC VA6CG FA6C 1 A 1 A
Flow-348
Rosemount Inc.
MODEL PHF+25M
Model Product Description
PHF+25M ProBar® + Flowmeter - Flanged Flo-Tap
ProBar®
HADH0 Direct Mount, 5-Valve Manifold, Horizontal Line, Hastelloy-C.
HADM0 Direct Mount, 5-Valve Manifold, Horizontal Line, Monel
HADMB Direct Mount, 5-Valve Manifold, ANSI B31.1, Horizontal Line, Monel
HADMN Direct Mount, 5-Valve Manifold, NACE, Horizontal Line, Monel
HAMM0 Integral, 3-Valve Manifold, Horizontal Line, Monel
HAPM0 Direct Mount, No Manifold, Horizontal Line, Monel
Direct and Integral Mount Heads - Horizontal Line with RTD
HATM0 Integral, 3-Valve Manifold, RTD, Horizontal Line, Monel
HATMB Direct Mount, 5-Valve Manifold, RTD, ANSI B31.1, Horizontal Line, Monel
HATMD Direct Mount, 5-Valve Manifold, RTD, Horizontal Line, Monel
HATMN Direct Mount, 5-Valve Manifold, RTD, NACE, Horizontal Line, Monel
Direct and Integral Mount Heads - Vertical Line
HVDH0 Direct Mount, 5-Valve Manifold, Vertical Line, Hastelloy-C.
HVDM0 Direct Mount, 5-Valve Manifold, Vertical Line, Monel
HVDMB Direct Mount, 5-Valve Manifold, ANSI B31.1, Vertical Line, Monel
HVDMN Direct Mount, 5-Valve Manifold, NACE, Vertical Line, Monel
HVMM0 Integral, 3-Valve Manifold, Vertical Line, Monel
HVPM0 Direct Mount, No Manifold, Vertical Line, Monel
Direct and Integral Mount Heads - Vertical Line with RTD
HVTM0 Integral, 3-Valve Manifold, RTD, Vertical Line, Monel
HVTMB Direct Mount, 5-Valve Manifold, RTD, ANSI B31.1, Vertical Line, Monel
HVTMD Direct Mount, 5-Valve Manifold, RTD, Vertical Line, Monel
HVTMN Direct Mount, 5-Valve Manifold, RTD, NACE, Vertical Line, Monel
Remote Mount - Horizontal Line
HA2M0 Axial, Horizontal Line, 1/2—14 NPT, Monel
HA2MS Axial, Horizontal Line, 1/2 in. Socket Weld Port, Monel
HP2M0 Parallel, Horizontal Line, 1/2—14 NPT, Monel
Remote Mount - Vertical Line
HPVM0 Parallel, Vertical Line, 1/2—14 NPT, Monel
HV2M0 Axial, Vertical Line, 1/2—14 NPT, Monel
HV2MS Axial, Vertical Line, 1/2 in. Socket Weld Port, Monel
Flow-349
ProBar® Flowmeter
MODEL PHF+25M
Code Instrument Connections (Continued)
Gate Valve - CS
CC2C0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, CS
SC2C0 Outside Stem and Yoke Gate Valve, Nipple and Tee, 1/2—14 NPT, CS
SV2C0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, CS
CB2C0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, CS
SB2C0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, CS
Gate Valve - SST
CC2S0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, SST
SC2S0 Outside Stem and Yoke Gate Valve, Nipple and Tee, Steam, 1/2—14 NPT, SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, SST
CB2S0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, SST
SB2S0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, SST
Code Insert/Retract
ProBar®
Code DP Ranges
1 0–0.5 to 0–25 inH2O (0–0.12 to 0–6.22 kPa)
2 0–2.5 to 0–250 inH2O (0–0.62 to 0–62.2 kPa)
3 0–10 to 0–830 inH2O (0–2.48 to 0–206 kPa)
Code Output
A 4—20 mA with Digital Signal based on HART
Flow-350
Rosemount Inc.
MODEL PHF+25M
Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, Explosion-Proof
TRA Integral RTD, Axial Head
TRP Integral RTD, Parallel Head
TXA Integral RTD, Explosion-Proof, Axial
TXP Integral RTD, Explosion-Proof, Parallel
ProBar®
2 LCD Meter (Rate) - SST Housing
4 External LCD Rate and Total Display
Typical Model Number: PHF+25M 040 HAMM0 C0000 GV6MA IHRC VA6CG FA6C 1 A 1 A
Flow-351
ProBar® Flowmeter
MODEL PHF+35S
Model Product Description
PHF+35S ProBar® + Flowmeter - Flanged Flo-Tap
Flow-352
Rosemount Inc.
MODEL PHF+35S
Code Instrument Connections (Continued)
Gate Valve - CS
CC2C0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, CS
SC2C0 Outside Stem and Yoke Gate Valve, Nipple and Tee, 1/2—14 NPT, CS
SV2C0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, CS
CB2C0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, CS
SB2C0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, CS
Gate Valve - SST
CC2S0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, SST
SC2S0 Outside Stem and Yoke Gate Valve, Nipple and Tee, Steam, 1/2—14 NPT, SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, SST
CB2S0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, SST
SB2S0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, SST
CB2SS Outside Stem and Yoke Gate Valve, Elbow, 1/2 in. Socket Weld Port, SST
CC2SS Outside Stem and Yoke Gate Valve, Nipple, 1/2 in. Socket Weld Port, SST
SV2SS Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2 in. Socket Weld Port, SST
ProBar®
GH8SC Urethane, 2 in. ANSI Class 600, SST
GH8SB Urethane, 2 in. ANSI Class 300, SST
GH8SA Urethane, 2 in. ANSI Class 150, SST
Code Insert/Retract
IHRS Manual, Dual, SST Rods
IHRC Manual, Dual, CS Rods
IHDS Gear, Dual, SST Rods
IHDC Gear, Dual, CS Rods
Code DP Ranges
0 0-0.1 to 0-3 inH20 (.0-.15 to 0 - 0.75 kPa)
1 0-.5 to 0-25 inH20 (0-.12 to 0-6.22 kPa)
2 0-2.5 to 0-250 inH20 (0-.62 to 0 - 62.2kPa)
3 0-10 to 0-830 inH20 (0-2.48 to 0-206kPa)
Code Output
A 4—20 mA with Digital Signal based on HART
Flow-353
ProBar® Flowmeter
MODEL PHF+35S
Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, Explosion-Proof
TRA Integral RTD, Axial Head
TRP Integral RTD, Parallel Head
TXA Integral RTD, Explosion-Proof, Axial
TXP Integral RTD, Explosion-Proof, Parallel
Typical Model Number: PHF+35S 120 HAMS0 C0000 GV8SA IHDC VA8C 1 A 1 A
Flow-354
Rosemount Inc.
MODEL PHF+45S
Model Product Description
PHF+45S ProBar® + Flowmeter - Flanged Flo-Tap
ProBar®
HADSB Direct Mount, 5-Valve Manifold, ANSI B31.1, Horizontal Line, SST
HADSN Direct Mount, 5-Valve Manifold, NACE, Horizontal Line, SST
HAMS0 Integral, 3-Valve Manifold, Horizontal Line, SST
HAPS0 Direct Mount, No Manifold, Horizontal Line, SST
HAXS0 Direct Mount, Quantity Two, 3-valve Manifold, Horizontal Line, SST
Direct and Integral Mount Heads - Horizontal Line with RTD
HATSN Direct Mount, 5-Valve Manifold, RTD, NACE, Horizontal Line, SST
HATS0 Integral, 3-Valve Manifold, RTD, Horizontal Line, SST
HATSD Direct Mount, 5-Valve Manifold, RTD, Horizontal Line, SST
Direct and Integral Mount Heads - Vertical Line
HVDSB Direct Mount, 5-Valve Manifold, ANSI B31.1, Vertical Line, SST
HVDSN Direct Mount, 5-Valve Manifold, NACE, Vertical Line, SST
HVMS0 Integral, 3-Valve Manifold, Vertical Line, SST
HVPS0 Direct Mount, No Manifold, Vertical Line, SST
HVTS0 Integral, 3-Valve Manifold, RTD, Vertical Line, SST
Direct and Integral Mount Heads - Vertical Line with RTD
HVTS0 Integral, 3-Valve Manifold, RTD, Vertical Line, SST
HVTSB Direct Mount, 5-Valve Manifold, RTD, ANSI B31.1, Vertical Line, SST
HVTSD Direct Mount, 5-Valve Manifold, RTD, Vertical Line, SST
HVTSN Direct Mount, 5-Valve Manifold, RTD, NACE, Vertical Line, SST
Flow-355
ProBar® Flowmeter
MODEL PHF+45S
Code Insert/Retract
IHRS Manual, Dual, SST Rods
IHRC Manual, Dual, CS Rods
IHDS Gear, Dual, SST Rods
IHDC Gear, Dual, CS Rods
Gate Valve
VCDSG Gate Valve, 3 in. ANSI Class 600, SST
VCDCG Gate Valve, 3 in. ANSI Class 600, CS
VBDSG Gate Valve, 3 in. ANSI Class 300, SST
VBDCG Gate Valve, 3 in. ANSI Class 300, CS
VADCG Gate Valve, 3 in. ANSI Class 150, CS
VADSG Gate Valve, 3 in. ANSI Class 150, SST
Ball Valve
VBDSB Ball Valve, 3 in. ANSI Class 300, SST
VBDCB Ball Valve, 3 in. ANSI Class 300, CS
VADCB Ball Valve, 3 in. ANSI Class 150, CS
VADSB Ball Valve, 3 in. ANSI Class 150, SST
Code DP Ranges
0 0-0.1 to 0-3 inH20 (.0-.15 to 0 - 0.75 kPa)
1 0-.5 to 0-25 inH20 (0-.12 to 0-6.22 kPa)
2 0-2.5 to 0-250 inH20 (0-.62 to 0 - 62.2kPa)
3 0-10 to 0-830 inH20 (0-2.48 to 0-206kPa)
Code Output
A 4—20 mA with Digital Signal based on HART
Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
Flow-356
Rosemount Inc.
MODEL PHF+45S
Code Optional Meters
1 LCD Meter (Rate)- Aluminum Housing
2 LCD Meter (Rate) - SST Housing
4 External LCD Rate and Total Display
ProBar®
R Multipoint Flow Calibration (18 in., 20 in.)
S Lab Flow Calibration (Average K) (18 in.-20 in.)
T Multipoint Flow Calibration (24 in.)
U Lab Flow Calibration (Average K) (24 in.)
V Multipoint Flow Calibration (30 in.)
W Lab Flow Calibration (Average K) (30 in.)
X Multipoint Flow Calibration (36 in.)
Y Lab Flow Calibration (Average K) (36 in.)
Typical Model Number: PHF+45S 240 HAMS0 C0000 GVDSA IHDS VADCG FADC 1 A 1 A
Flow-357
ProBar® Flowmeter
MODEL PHF+45H
Model Product Description
PHF+45H ProBar® + Flowmeter - Flanged Flo-Tap
Eliminate Instrument Connection Options (For use with Direct and Integral Mount Head Styles)
C0000 Eliminate Instrument Connection Assembly
S0000 Eliminate Instrument Connection Assembly (Steam)
Needle Valve - CS
CP2C0 Needle Valve, Nipple, 1/2—14 NPT, CS
SP2C0 Needle Valve, Nipple and Tee, 1/2—14 NPT, CS
Needle Valve - SST
CP2S0 Needle Valve, Nipple, 1/2—14 NPT, SST
SP2S0 Needle Valve, Nipple and Tee, 1/2—14 NPT, SST
Needle Valve - Hastelloy
CP2H0 Needle Valve, Nipple, 1/2—14 NPT, Hastelloy-C.
Gate Valve - CS
CC2C0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, CS
SC2C0 Outside Stem and Yoke Gate Valve, Nipple and Tee, 1/2—14 NPT, CS
SV2C0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, CS
Gate Valve - SST
CC2S0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, SST
SC2S0 Outside Stem and Yoke Gate Valve, Nipple and Tee, Steam, 1/2—14 NPT, SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, SST
Flow-358
Rosemount Inc.
MODEL PHF+45H
Code Insert/Retract
IHRS Manual, Dual, SST Rods
IHRC Manual, Dual, CS Rods
IHDS Gear, Dual, SST Rods
IHDC Gear, Dual, CS Rods
Gate Valve
VCDSG Gate Valve, 3 in. ANSI Class 600, SST
VCDCG Gate Valve, 3 in. ANSI Class 600, CS
VBDSG Gate Valve, 3 in. ANSI Class 300, SST
VBDCG Gate Valve, 3 in. ANSI Class 300, CS
VADCG Gate Valve, 3 in. ANSI Class 150, CS
VADSG Gate Valve, 3 in. ANSI Class 150, SST
Ball Valve
VBDSB Ball Valve, 3 in. ANSI Class 300, SST
VBDCB Ball Valve, 3 in. ANSI Class 300, CS
VADCB Ball Valve, 3 in. ANSI Class 150, CS
VADSB Ball Valve, 3 in. ANSI Class 150, SST
ProBar®
FADC 3 in. ANSI Class 150, Weld-Neck RF, CS
FADS 3 in. ANSI Class 150, Weld-Neck RF, SST
FBDC 3 in. ANSI Class 300, Weld-Neck RF, CS
FBDS 3 in. ANSI Class 300, Weld-Neck RF, SST
FCDC 3 in. ANSI Class 600, Weld-Neck RF, CS
FCDS 3 in. ANSI Class 600, Weld-Neck RF, SST
Code DP Ranges
1 0–0.5 to 0–25 inH2O (0–0.12 to 0–6.22 kPa)
2 0–2.5 to 0–250 inH2O (0–0.62 to 0–62.2 kPa)
3 0–10 to 0–830 inH2O (0–2.48 to 0–206 kPa)
Code Output
A 4—20 mA with Digital Signal based on HART
Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
Flow-359
ProBar® Flowmeter
MODEL PHF+45H
Code Optional Hazardous Location Certificates
I5 FM Intrinsic Safety Approval
C6 CSA Explosion-Proof and Intrinsic Safety Approval
E5 FM Explosion-Proof Approval
K5 FM Explosion-Proof and Intrinsic Safety Approval
ID KEMA/CENELEC Intrinsic Safety Approval
ED KEMA/CENELEC Explosion-Proof Approval
Typical Model Number: PHF+45H 240 HAMS0 C0000 GVDHA IHDC VADCG FADC 1 A 1 A
Flow-360
Rosemount Inc.
MODEL PHF+45M
Model Product Description
PHF+45M ProBar® + Flowmeter - Flanged Flo-Tap
ProBar®
HADMB Direct Mount, 5-Valve Manifold, ANSI B31.1, Horizontal Line, Monel
HADMN Direct Mount, 5-Valve Manifold, NACE, Horizontal Line, Monel
HAMM0 Integral, 3-Valve Manifold, Horizontal Line, Monel
HAPM0 Direct Mount, No Manifold, Horizontal Line, Monel
Direct and Integral Mount Heads - Horizontal Line with RTD
HATM0 Integral, 3-Valve Manifold, RTD, Horizontal Line, Monel
HATMB Direct Mount, 5-Valve Manifold, RTD, ANSI B31.1, Horizontal Line, Monel
HATMD Direct Mount, 5-Valve Manifold, RTD, Horizontal Line, Monel
HATMN Direct Mount, 5-Valve Manifold, RTD, NACE, Horizontal Line, Monel
Direct and Integral Mount Heads - Vertical Line
HVDM0 Direct Mount, 5-Valve Manifold, Vertical Line, Monel
HVDMB Direct Mount, 5-Valve Manifold, ANSI B31.1, Vertical Line, Monel
HVDMN Direct Mount, 5-Valve Manifold, NACE, Vertical Line, Monel
HVMM0 Integral, 3-Valve Manifold, Vertical Line, Monel
HVPM0 Direct Mount, No Manifold, Vertical Line, Monel
Direct and Integral Mount Heads - Vertical Line with RTD
HVTM0 Integral, 3-Valve Manifold, RTD, Vertical Line, Monel
HVTMB Direct Mount, 5-Valve Manifold, RTD, ANSI B31.1, Vertical Line, Monel
HVTMD Direct Mount, 5-Valve Manifold, RTD, Vertical Line, Monel
HVTMN Direct Mount, 5-Valve Manifold, RTD, NACE, Vertical Line, Monel
Remote Mount - Horizontal Line
HA2M0 Axial, Horizontal Line, 1/2—14 NPT, Monel
HA2MS Axial, Horizontal Line, 1/2 in. Socket Weld Port, Monel
HP2M0 Parallel, Horizontal Line, 1/2—14 NPT, Monel
Remote Mount - Vertical Line
HPVM0 Parallel, Vertical Line, 1/2—14 NPT, Monel
HV2M0 Axial, Vertical Line, 1/2—14 NPT, Monel
HV2MS Axial, Vertical Line, 1/2 in. Socket Weld Port, Monel
Flow-361
ProBar® Flowmeter
MODEL PHF+45M
Code Packing Gland
GVDMC Graphite, 3 in. ANSI Class 600, Monel
GVDMB Graphite, 3 in. ANSI Class 300, Monel
GVDMA Graphite, 3 in. ANSI Class 150, Monel
Code Insert/Retract
IHRS Manual, Dual, SST Rods
IHRC Manual, Dual, CS Rods
IHDS Gear, Dual, SST Rods
IHDC Gear, Dual, CS Rods
Code DP Ranges
1 0–0.5 to 0–25 inH2O (0–0.12 to 0–6.22 kPa)
2 0–2.5 to 0–250 inH2O (0–0.62 to 0–62.2 kPa)
3 0–10 to 0–830 inH2O (0–2.48 to 0–206 kPa)
Code Output
A 4—20 mA with Digital Signal based on HART
Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
Flow-362
Rosemount Inc.
MODEL PHF+45M
Code Optional Meters
1 LCD Meter (Rate)- Aluminum Housing
2 LCD Meter (Rate) - SST Housing
4 External LCD Rate and Total Display
ProBar®
R Multipoint Flow Calibration (18 in., 20 in.)
S Lab Flow Calibration (Average K) (18 in.-20 in.)
T Multipoint Flow Calibration (24 in.)
U Lab Flow Calibration (Average K) (24 in.)
V Multipoint Flow Calibration (30 in.)
W Lab Flow Calibration (Average K) (30 in.)
X Multipoint Flow Calibration (36 in.)
Y Lab Flow Calibration (Average K) (36 in.)
Typical Model Number: PHF+45M 240 HAMM0 C0000 GVDMA IHDC VADCG FADC 1 A 1 A
Flow-363
ProBar® Flowmeter
ProBar®
364
Flow-364
Rosemount Inc.
ProBar®
Flow-365
ProBar® Flowmeter
ProBar®
366
Flow-366
Rosemount Inc.
ProBar®
Flow-367
ProBar® Flowmeter
ProBar®
368
Flow-368
Rosemount Inc.
ProBar®
Flow-369
ProBar® Flowmeter
ProBar®
Flow-370
Rosemount Inc.
Specifications
ProBar®
(0-0.12 to 0-7.22 kPa). -40 °F to 850 °F (-40 °C to 454 °C).
Range 2: 0-2.5 in. to 0-250 in. H20 Remote mount (Hastelloy-C):
(0-0.62 to 0-62.2 kPa).
-40 °F to 900 °F (-40 °C to 482 °C).
Range 3: 0-10 in. to 0-1000 in. H20
(0-2.48 to 0-248 kPa). Remote mount (Hastelloy-C) with remote
temperature sensor :
Indication -40 °F to 1200 °F (-40 °C to 649 °C).
Ambient: -40 °F to 185 °F (-40 °C to 85 °C).
Optional two-line, scalable digital LCD meter.
With integral meter: -4 °F to 175 °F (-20 °C to 80 °C).
Output
4-20mADC, flow rate output. Damping
Digital HART protocol superimposed on a 4–20mA Analog output response to a step input change is
signal, available to any host that conforms to the user selectable from 0 to 36 seconds for one time
HART protocol. constant. This software damping is in addition to
sensor module response time.
Power Supply
External power supply required. Operates on Turn on Time
10.5-55VDC with no load.
Performance within specification less than two
4–20mA Load Limitations seconds after power is applied.
1935
Load (Ohms)
1500
1000
500 Operating
Region
0
10.5 20 30 40 55
42.4 1
Voltage (V dc)
(Including linearity, hysteresis, and repeatability) • +(0.0188% URL + 0.0938% span) spans
from 1:1 to 10:1.
Multipoint calibration: + 0.5% of rate
(at reference conditions). • +(0.038% URL + 0.188% span) spans
from 10:1 to 100:1.
No Flow Calibration
For range 1: +(0.18% URL + 0.375% span).
+ 1.1% of volumetric flow rate.
Static Pressure Effect
+ 3% of volumetric flow rate, elbow mount.
Zero error (can be calibrated out at line pressure).
Flow Turndown
• 0.1% of URL/1,000 psi (6.9MPa) for line
10:1 flow turndown—multipoint calibration.(2) pressures from 0 to 2,000 psi (0 to 13.7MPa).
ProBar®
5:1 flow turndown—no calibration. • 0.2% of URL/1,000 psi (6.9MPa) for line
pressure above 2,000 psi (13.7MPa).
Stability
For range 1:0.25% of URL/1,000 psi (6.9MPa).
+ 0.25% of URL for five years.
Mounting Position Effect
Time Response (Electronics Only)
Zero shifts up to 2.5 inches ws (0.62kPa) which can
Dead time (Td): 45 milliseconds (nominal). be calibrated out. No span effect.
Flow-372
Rosemount Inc.
ProBar®
Head Styles (3 and 5 Valve)
• Process isolating diaphragms: Monel.
Material • O-rings: Glass-filled TFE.
VMax = 40 V dc A–G
Temperature Options IMax = 165 mA A–G
IMax = 225 mA C–G
Integral RTD IMax = 160 mA (Option Code T1) A–G
PMax = 1 W A–G
100 Ω Platinum RTD. CI = 0.01 µF (Output Code A) A–G
LI = 10 µH A–G
Remote LI = 1.05 mH (Output Code A with T1) A–G
100 Ω Platinum RTD. (1) When connected in accordance with Rosemount drawings 3031-
1019 and 00275-0081 (for use with the HART Communicator
Spring loaded with ½ —14 NPT nipple and union. Model 275), or 00268-0031 (for use with the Rosemount Model
268 Communicator.)
Flow-373
ProBar® Flowmeter
≤ 30 V, ≥ 330 V ≤ 28 V, ≥ 300 V
≤ 25 V, ≥ 200 V ≤ 22 V, ≥ 180 V
Code A
Output
A–D
ProBar®
≤ 30 V, ≥ 150 V C–D
Supply ≤ 28V, ≥ 300 V
Return ≤ 10 V, ≥ 47 V
Code M
Output
A–D
Supply ≤ 30 V, ≥ 150 V C–D
Return ≤ 10 V, ≥ 47 V
May be protected by one or more of the following U.S. Patent Nos.4,559,836; 4,717,159; 5,710,370; 5,773,726; 4,633,713;
and various foreign patents. Other foreign patents issued and pending.
Rosemount and the Rosemount logotype are registered trademarks of Rosemount Inc.
Coplanar, MV, and Multivariable are trademarks of Rosemount Inc.
PlantWeb is a mark of the Fisher-Rosemount group of companies.
Mass ProBar, ProBar, and Annubar are registered trademarks of Dieterich Standard Inc.
HART is a registered trademark of the HART Communications Foundation.
Monel is a registered trademark of International Nickel Co.
Teflon is a registered trademark of E. I. du Pont de Nemours & Co.
Hastelloy C and Hastelloy C-276 are registered trademarks of Cabot Corp.
Windows is a trademark of Microsoft Corp.
IN
http://www.rosemount.com U. S. A.
¢00809-0100-4716;¤
00813-0100-4761 Rev. DA 11/98
Flow-374