Professional Documents
Culture Documents
Valve Adhesion: Work Instructions-Testing of Physical Properties
Valve Adhesion: Work Instructions-Testing of Physical Properties
No : LAB
Equipments used :
1 Scissor / Blade
2 Tensile Tester
3 Measuring Scale.
Sample Preparation :
2 Cut the Strip arround 10 mm width of valve base fixed with tube and measure the width of strip.
Procedure :
1 Separate the valve base rubber to the tube from one end with help of blade.
2 Fix the Specimen in jaws and start pulling of It , ensure that Machine Speed Should be 50mm/min .
3 When Valve-base starts getting separated from the tube , observe the Reading from Dial-Guage .
4 Record the reading when the needle of dial gauge reaches its highest.
Calculation :
PRECAUTIONS :
1 Cured tubes must be free from defect like Valve Under Cure , Valve Blister etc.
Revision History :
S. No. Revision No. Revision Date Revision Details Prepared by Checked by Approved by
02 01 27.02.19 Updation