Professional Documents
Culture Documents
Cengg11 Midterm 2021
Cengg11 Midterm 2021
Name:___________________________________________________________ Score__________________
II. Multiple Choice (select the best answer of the choices provided, encircle the letter of your choice)
1) Wide flange section has a designation of: 6) ) For laterally supported W shape and I sections the method of
a. I b. W c. HP determining if section is compact
2) For laterally supported w shape and I sections the method of determining if d 1680 bf 170
section is compact a. < b < c. all of the
bf 170 bf 170 tw √ fy 2tf √ fy
a. > b. < c. none of the choices
2tf √ fy 2tf √ fy 7) Allowable bending stress for steel non-compact section.
choices a. 0.60 fy b. 0.66fy c. 0.50fy
3) Channels are designated as: 8) Allowable bending stress for steel compact section.
a. L b. C c. M a. 0.60 fy b. 0.66fy c. 0.50fy
4) For laterally supported W shape and I sections the method of determining if section 9) Maximum moment for three moving loads can be obtained if the midspan
is non compact of beam coincides with:
bf 170 bf 170 a. Resultant and smaller load b. Resultant and bigger load c.
a. > b. < c. none of the all of the choices
2tf √ fy 2tf √ fy 10) Formula for bending moment of steel section.
choices a. fb = Mc/I b. fb = M/Sc. all of the choices
5) Most common section used a steel purlin.
a. C section b. I section c. W section
2)
Approved by:
Republic of the Philippines Document Code: CEA-BF-026
UNIVERSITY OF ANTIQUE Revision No.: 00
Sibalom, Antique
Telefax No. (036) 543-8161 Effectivity Date: 01/04/2016
E-mail: ua@antiquespride.edu.ph Page: 2 of 2