Professional Documents
Culture Documents
Technical Data Sheet Twincril White 6001 6100
Technical Data Sheet Twincril White 6001 6100
RALVA, SA reserves the right to update and modify any specific technical data according to the legislation in force. The information, prescriptions and use given, are based in Ralva’s knowledge about its
products in normal situations and using them correctly. The user must verify the suitability of the product attending to the use intentions, the surface and the real conditions of the appliance place.
1) Dosage for flat lines road marking: recommended dosage of 720 gr/m2 (A+B) + 480 gr/m2 of glass beads,
depending on surface.
2) Dosage for application as resin for aggregates retention (1 – 2 mm): in this case, ideal dosage is 2 –
2.5 kg/m2.
3) Dosage for unicomponent application: Component A (6001) can be applied with airless unicomponent
machine, adding glass beads recoated with peroxide (TECNOPEARL kind) and drop-on glass beads.
Dosage for this system is 600 gr/m2 of paint, 300 gr/m2 of TECNOPEARL glass beads and 300 gr/m2 of drop-
on glass beads, the latter must be thinner.
4) Dosage for symbols and pedestrian crossings: recommended dosage of 1000gr /m2 of paint and 500
gr/m2 of drop-on glass beads.
5) To obtain only antiskid property, add aggregates with dosage 250 gr/m2.
6) If both antiskid and retro-reflexion are required, add a mixture of aggregates and glass beads (GRANILUX or
VARILUX kind), with dosage of 480 gr/m2 in both cases.
RALVA, SA reserves the right to update and modify any specific technical data according to the legislation in force. The information, prescriptions and use given, are based in Ralva’s knowledge about its
products in normal situations and using them correctly. The user must verify the suitability of the product attending to the use intentions, the surface and the real conditions of the appliance place.
STANDARDS
CE MARKING: Product with CE Marking 1219 – DCP / CPD – 0035, DITE/ETA 10/0441
Road marking Paint complies with all requirements and characteristics specified in “PLIEGO DE
PRESCRIPCIONES TÉCNICAS (PG-3) – Artículo 700 – MARCAS VIALES” (Spanish Standard) and “UNE
– EN 1871 and UNE – EN 12802.
ROAD MARKING: when the system is correctly applied, will comply requirements of Standard UNE – EN
1436.
DURABILITY: durability certificates satisfy Standards UNE –EN 13197 and UNE 135200/3 (B method).
SAFETY DATA SHEET: Please refer to the product label and security data sheet for further information. They
can be requested to the technical-sales department or at our website: www.pinturasralva.com
RALVA, SA reserves the right to update and modify any specific technical data according to the legislation in force. The information, prescriptions and use given, are based in Ralva’s knowledge about its
products in normal situations and using them correctly. The user must verify the suitability of the product attending to the use intentions, the surface and the real conditions of the appliance place.