AutoBleem 0.9.0 Bluetooth Controller Setup

You might also like

Download as txt, pdf, or txt
Download as txt, pdf, or txt
You are on page 1of 1

AutoBleem 0.9.

0 Bluetooth Controller Setup

1. Start BlueTool
2. Enter your PSC IP Address in the Address field
3. Click Connect
4. Put your controller into pair mode
5. When your controller appears in the Detected Devices (Click to Pair) area
click the controller listed. For example, "Pro Controller"
6. Once your controller is listed in the Paired Devices (Click to Unpair) field
your controller has been successfully paired to the PSC.

NOTE: Bluetooth support is currently experimental at this point. Some controllers


will work better than others, while some may not work at all. These controllers
have
been tested:

1. The Switch Pro controller has worked well in our testing


2. The GameSir G3s controller has worked well in our testing. Press B and Home to
pair.
3. The PlayStation 4 controller mostly works with some minor issues experienced in
Evoui
4. The PlayStation 3 controller does not currently work properly but is being
worked on

Support for additional controllers will follow in future releases

You might also like